Make the nbtree page split REDO routine consistent with original
execution in its approach to acquiring and releasing buffer locks (at
least for pages on the tree level of the page being split). This brings
btree_xlog_split() in line with btree_xlog_unlink_page(), which was
taught to couple buffer locks by commit 9a9db08a.
Note that the precise order in which we both acquire and release sibling
buffer locks in btree_xlog_split() now matches original execution
exactly (the precise order in which the locks are released probably
doesn't matter much, but we might as well be consistent about it).
The rule for nbtree REDO routines from here on is that same-level locks
should be acquired in an order that's consistent with original
execution. It's not practical to have a similar rule for cross-level
page locks, since for the most part original execution holds those locks
for a period that spans multiple atomic actions/WAL records. It's also
not necessary, because clearly the cross-level lock coupling is only
truly needed during original execution because of the presence of
concurrent inserters.
This is not a bug fix (unlike the similar aforementioned commit, commit
9a9db08a). The immediate reason to tighten things up in this area is to
enable an upcoming enhancement to contrib/amcheck that allows it to
verify that sibling links are in agreement with only an AccessShareLock
(this check produced false positives when run on a replica server on
account of the inconsistency fixed by this commit). But that's not the
only reason to be stricter here.
It is generally useful to make locking on replicas be as close to what
happens during original execution as practically possible. It makes it
less likely that hard to catch bugs will slip in in the future. The
previous state of affairs seems to be a holdover from before the
introduction of Hot Standby, when buffer lock acquisitions during
recovery were totally unnecessary. See also: commit 3bbf668d, which
tightened things up in this area a few years after the introduction of
Hot Standby.
Discussion: https://postgr.es/m/CAH2-Wz=465cJj11YXD9RKH8z=nhQa2dofOZ_23h67EXUGOJ00Q@mail.gmail.com
Make the nbtree page split REDO routine variable names consistent with
_bt_split() (which handles the original execution of page splits).
These names make the code easier to follow by making the distinction
between the original page and the left half of the split clear. (The
left half of the split page is a temp page that REDO creates to replace
the origpage contents.)
Also reduce the elevel used when adding a new high key to the temp page
from PANIC to ERROR to be consistent. We already only raise an ERROR
when data item PageAddItem() temp page calls fail.
Currently, page unlink leaves remaining items "as is", but replay of
corresponding WAL-record re-initializes page leaving it with no items.
For the sake of consistency, this commit makes primary delete all the items
during page unlink as well.
Thanks to this change, we now don't mask contents of deleted btree page for
WAL consistency checking.
Discussion: https://postgr.es/m/CAPpHfdt_OTyQpXaPJcWzV2N-LNeNJseNB-K_A66qG%3DL518VTFw%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Peter Geoghegan
It was possible for the logic used by backward scans (which must reason
about concurrent page splits/deletions in its own peculiar way) to
become confused when running on a replica. Concurrent replay of a WAL
record that describes the second phase of page deletion could cause
_bt_walk_left() to get confused. btree_xlog_unlink_page() simply failed
to adhere to the same locking protocol that we use on the primary, which
is obviously wrong once you consider these two disparate functions
together. This bug is present in all stable branches.
More concretely, the problem was that nothing stopped _bt_walk_left()
from observing inconsistencies between the deletion's target page and
its original sibling pages when running on a replica. This is true even
though the second phase of page deletion is supposed to work as a single
atomic action. Queries running on replicas raised "could not find left
sibling of block %u in index %s" can't-happen errors when they went back
to their scan's "original" page and observed that the page has not been
marked deleted (even though it really was concurrently deleted).
There is no evidence that this actually happened in the real world. The
issue came to light during unrelated feature development work. Note
that _bt_walk_left() is the only code that cares about the difference
between a half-dead page and a fully deleted page that isn't also
exclusively used by nbtree VACUUM (unless you include contrib/amcheck
code). It seems very likely that backward scans are the only thing that
could become confused by the inconsistency. Even amcheck's complex
bt_right_page_check_scankey() dance was unaffected.
To fix, teach btree_xlog_unlink_page() to lock the left sibling, target,
and right sibling pages in that order before releasing any locks (just
like _bt_unlink_halfdead_page()). This is the simplest possible
approach. There doesn't seem to be any opportunity to be more clever
about lock acquisition in the REDO routine, and it hardly seems worth
the trouble in any case.
This fix might enable contrib/amcheck verification of leaf page sibling
links with only an AccessShareLock on the relation. An amcheck patch
from Andrey Borodin was rejected back in January because it clashed with
btree_xlog_unlink_page()'s lax approach to locking pages. It now seems
likely that the real problem was with btree_xlog_unlink_page(), not the
patch.
This is a low severity, low likelihood bug, so no backpatch.
Author: Michail Nikolaev
Diagnosed-By: Michail Nikolaev
Discussion: https://postgr.es/m/CANtu0ohkR-evAWbpzJu54V8eCOtqjJyYp3PQ_SGoBTRGXWhWRw@mail.gmail.com
Add a documenting assertion that's similar to the nearby assertion added
by commit cd8c73a3. This conveys that the entire call to _bt_pagedel()
does no work if it isn't possible to get a descent stack for the initial
scanblkno page.
We have edge-case bugs when assigning values in the last few dozen pages
before the wrap limit. We may introduce similar bugs in the future. At
default BLCKSZ, this makes such bugs unreachable outside of single-user
mode. Also, when VACUUM began to consume mxacts, multiStopLimit did not
change to compensate.
pg_upgrade may fail on a cluster that was already printing "must be
vacuumed" warnings. Follow the warning's instructions to clear the
warning, then run pg_upgrade again. One can still, peacefully consume
98% of XIDs or mxacts, so DBAs need not change routine VACUUM settings.
Discussion: https://postgr.es/m/20200621083513.GA3074645@rfd.leadboat.com
This allows AM-specific knowledge to be applied during creation of
pg_amop and pg_amproc entries. Specifically, the AM knows better than
core code which entries to consider as required or optional. Giving
the latter entries the appropriate sort of dependency allows them to
be dropped without taking out the whole opclass or opfamily; which
is something we'd like to have to correct obsolescent entries in
extensions.
This callback also opens the door to performing AM-specific validity
checks during opclass creation, rather than hoping than an opclass
developer will remember to test with "amvalidate". For the most part
I've not actually added any such checks yet; that can happen in a
follow-on patch. (Note that we shouldn't remove any tests from
"amvalidate", as those are still needed to cross-check manually
constructed entries in the initdb data. So adding tests to
"amadjustmembers" will be somewhat duplicative, but it seems like
a good idea anyway.)
Patch by me, reviewed by Alexander Korotkov, Hamid Akhtar, and
Anastasia Lubennikova.
Discussion: https://postgr.es/m/4578.1565195302@sss.pgh.pa.us
Avoid repeatedly calling lseek(SEEK_END) during recovery by caching
the size of each fork. For now, we can't use the same technique in
other processes, because we lack a shared invalidation mechanism.
Do this by generalizing the pre-existing caching used by FSM and VM
to support all forks.
Discussion: https://postgr.es/m/CAEepm%3D3SSw-Ty1DFcK%3D1rU-K6GSzYzfdD4d%2BZwapdN7dTa6%3DnQ%40mail.gmail.com
For pg_attribute, this allows to insert at once a full set of attributes
for a relation (roughly 15% of WAL reduction in extreme cases). For
pg_shdepend, this reduces the work done when creating new shared
dependencies from a database template. The number of slots used for the
insertion is capped at 64kB of data inserted for both, depending on the
number of items to insert and the length of the rows involved.
More can be done for other catalogs, like pg_depend. This part requires
a different approach as the number of slots to use depends also on the
number of entries discarded as pinned dependencies. This is also
related to the rework or dependency handling for ALTER TABLE and CREATE
TABLE, mainly.
Author: Daniel Gustafsson
Reviewed-by: Andres Freund, Michael Paquier
Discussion: https://postgr.es/m/20190213182737.mxn6hkdxwrzgxk35@alap3.anarazel.de
When fast promotion was supported in 9.3, non-fast promotion became
undocumented feature and it's basically not available for ordinary users.
However we decided not to remove non-fast promotion at that moment,
to leave it for a release or two for debugging purpose or as an emergency
method because fast promotion might have some issues, and then to
remove it later. Now, several versions were released since that decision
and there is no longer reason to keep supporting non-fast promotion.
Therefore this commit removes non-fast promotion.
Author: Fujii Masao
Reviewed-by: Hamid Akhtar, Kyotaro Horiguchi
Discussion: https://postgr.es/m/76066434-648f-f567-437b-54853b43398f@oss.nttdata.com
Previously we would allocate blocks to parallel workers during a parallel
sequential scan 1 block at a time. Since other workers were likely to
request a block before a worker returns for another block number to work
on, this could lead to non-sequential I/O patterns in each worker which
could cause the operating system's readahead to perform poorly or not at
all.
Here we change things so that we allocate consecutive "chunks" of blocks
to workers and have them work on those until they're done, at which time
we allocate another chunk for the worker. The size of these chunks is
based on the size of the relation.
Initial patch here was by Thomas Munro which showed some good improvements
just having a fixed chunk size of 64 blocks with a simple ramp-down near
the end of the scan. The revisions of the patch to make the chunk size
based on the relation size and the adjusted ramp-down in powers of two was
done by me, along with quite extensive benchmarking to determine the
optimal chunk sizes.
For the most part, benchmarks have shown significant performance
improvements for large parallel sequential scans on Linux, FreeBSD and
Windows using SSDs. It's less clear how this affects the performance of
cloud providers. Tests done so far are unable to obtain stable enough
performance to provide meaningful benchmark results. It is possible that
this could cause some performance regressions on more obscure filesystems,
so we may need to later provide users with some ability to get something
closer to the old behavior. For now, let's leave that until we see that
it's really required.
Author: Thomas Munro, David Rowley
Reviewed-by: Ranier Vilela, Soumyadeep Chakraborty, Robert Haas
Reviewed-by: Amit Kapila, Kirk Jamison
Discussion: https://postgr.es/m/CA+hUKGJ_EErDv41YycXcbMbCBkztA34+z1ts9VQH+ACRuvpxig@mail.gmail.com
When wal_level=logical, write invalidations at command end into WAL so
that decoding can use this information.
This patch is required to allow the streaming of in-progress transactions
in logical decoding. The actual work to allow streaming will be committed
as a separate patch.
We still add the invalidations to the cache and write them to WAL at
commit time in RecordTransactionCommit(). This uses the existing
XLOG_INVALIDATIONS xlog record type, from the RM_STANDBY_ID resource
manager (see LogStandbyInvalidations for details).
So existing code relying on those invalidations (e.g. redo) does not need
to be changed.
The invalidations written at command end uses a new xlog record type
XLOG_XACT_INVALIDATIONS, from RM_XACT_ID resource manager. See
LogLogicalInvalidations for details.
These new xlog records are ignored by existing redo procedures, which
still rely on the invalidations written to commit records.
The invalidations are decoded and accumulated in top-transaction, and then
executed during replay. This obviates the need to decode the
invalidations as part of a commit record.
Bump XLOG_PAGE_MAGIC, since this introduces XLOG_XACT_INVALIDATIONS.
Author: Dilip Kumar, Tomas Vondra, Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Neha Sharma and Mahendra Singh Thalor
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
Holding just a buffer pin (with no buffer lock) on an nbtree buffer/page
provides very weak guarantees, especially compared to heapam, where it's
often safe to read a page while only holding a buffer pin. This commit
has Valgrind enforce the following rule: it is never okay to access an
nbtree buffer without holding both a pin and a lock on the buffer.
A draft version of this patch detected questionable code that was
cleaned up by commits fa7ff642 and 7154aa16. The code in question used
to access an nbtree buffer page's special/opaque area with no buffer
lock (only a buffer pin). This practice (which isn't obviously unsafe)
is hereby formally disallowed in nbtree. There doesn't seem to be any
reason to allow it, and banning it keeps things simple for Valgrind.
The new checks are implemented by adding custom nbtree client requests
(located in LockBuffer() wrapper functions); these requests are
"superimposed" on top of the generic bufmgr.c Valgrind client requests
added by commit 1e0dfd16. No custom resource management cleanup code is
needed to undo the effects of marking buffers as non-accessible under
this scheme.
Author: Peter Geoghegan
Reviewed-By: Anastasia Lubennikova, Georgios Kokolatos
Discussion: https://postgr.es/m/CAH2-WzkLgyN3zBvRZ1pkNJThC=xi_0gpWRUb_45eexLH1+k2_Q@mail.gmail.com
max_slot_wal_keep_size that was added in v13 and wal_keep_segments are
the GUC parameters to specify how much WAL files to retain for
the standby servers. While max_slot_wal_keep_size accepts the number of
bytes of WAL files, wal_keep_segments accepts the number of WAL files.
This difference of setting units between those similar parameters could
be confusing to users.
To alleviate this situation, this commit renames wal_keep_segments to
wal_keep_size, and make users specify the WAL size in it instead of
the number of WAL files.
There was also the idea to rename max_slot_wal_keep_size to
max_slot_wal_keep_segments, in the discussion. But we have been moving
away from measuring in segments, for example, checkpoint_segments was
replaced by max_wal_size. So we concluded to rename wal_keep_segments
to wal_keep_size.
Back-patch to v13 where max_slot_wal_keep_size was added.
Author: Fujii Masao
Reviewed-by: Álvaro Herrera, Kyotaro Horiguchi, David Steele
Discussion: https://postgr.es/m/574b4ea3-e0f9-b175-ead2-ebea7faea855@oss.nttdata.com
The logical decoding infrastructure needs to know which top-level
transaction the subxact belongs to, in order to decode all the
changes. Until now that might be delayed until commit, due to the
caching (GPROC_MAX_CACHED_SUBXIDS), preventing features requiring
incremental decoding.
So we also write the assignment info into WAL immediately, as part
of the next WAL record (to minimize overhead) only when wal_level=logical.
We can not remove the existing XLOG_XACT_ASSIGNMENT WAL as that is
required for avoiding overflow in the hot standby snapshot.
Bump XLOG_PAGE_MAGIC, since this introduces XLR_BLOCK_ID_TOPLEVEL_XID.
Author: Tomas Vondra, Dilip Kumar, Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Neha Sharma and Mahendra Singh Thalor
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
Valgrind builds with assertions enabled sometimes perform a
theoretically unsafe page access inside an assertion in
heapam_tuple_lock(). This happened when the eval-plan-qual isolation
test ran one of the permutations added by commit a2418f9e23.
Avoid complaints from Valgrind by moving the assertion ever so slightly.
This is minor cleanup for commit 1e0dfd16, which added Valgrind buffer
access instrumentation.
No backpatch, since this only happens within an assertion, and seems
very unlikely to cause any real problems even with assert-enabled
builds.
There is no advantage to attempting deduplication for a unique index
during CREATE INDEX, since there cannot possibly be any duplicates.
Doing so wastes cycles due to unnecessary copying. Make sure that we
avoid it consistently.
We already avoided unique index deduplication in the case where there
were some spool2 tuples to merge. That didn't account for the fact that
spool2 is removed early/unset in the common case where it has no tuples
that need to be merged (i.e. it failed to account for the "spool2 turns
out to be unnecessary" optimization in _bt_spools_heapscan()).
Oversight in commit 0d861bbb, which added nbtree deduplication
Backpatch: 13-, where nbtree deduplication was introduced.
Incorrect function names were referenced. As this fixes some portions
of tableam.h, that is mentioned in the docs as something to look at when
implementing a table AM, backpatch down to 12 where this has been
introduced.
Author: Hironobu Suzuki
Discussion: https://postgr.es/m/8fe6d672-28dd-3f1d-7aed-ac2f6d599d3f@interdb.jp
Backpatch-through: 12
Remove previous hack in KeepLogSeg that added a case to deal with a
(badly represented) invalid segment number. This was added for the sake
of GetWALAvailability. But it's not needed if in that function we
initialize the segment number to be retreated to the currently being
written segment, so do that instead.
Per valgrind-running buildfarm member skink, and some sparc64 animals.
Discussion: https://postgr.es/m/1724648.1594230917@sss.pgh.pa.us
This includes two changes:
- Addition of a new function pg_xact_commit_timestamp_origin() able, for
a given transaction ID, to return the commit timestamp and replication
origin of this transaction. An equivalent function existed in
pglogical.
- Addition of the replication origin to pg_last_committed_xact().
The commit timestamp manager includes already APIs able to return the
replication origin of a transaction on top of its commit timestamp, but
the code paths for replication origins were never stressed as those
functions have never looked for a replication origin, and the SQL
functions available have never included this information since their
introduction in 73c986a.
While on it, refactor a test of modules/commit_ts/ to use tstzrange() to
check that a transaction timestamp is within the wanted range, making
the test a bit easier to read.
Bump catalog version.
Author: Movead Li
Reviewed-by: Madan Kumar, Michael Paquier
Discussion: https://postgr.es/m/2020051116430836450630@highgo.ca
This message was being emitted on the grounds that only crashed
summarization could cause it, but in reality even an aborted vacuum
could do it ... which makes it way too noisy, particularly since it
shows up in regression tests and makes them die.
Reported by Tom Lane.
Discussion: https://postgr.es/m/489091.1593534251@sss.pgh.pa.us
Since slot_keep_segs indicates the number of WAL segments not LSN,
its datatype should not be XLogRecPtr.
Back-patch to v13 where this issue was added.
Reported-by: Atsushi Torikoshi
Author: Atsushi Torikoshi, tweaked by Fujii Masao
Discussion: https://postgr.es/m/ebd0d674f3e050222238a960cac5251a@oss.nttdata.com
The previous definition of the column was almost universally disliked,
so provide this updated definition which is more useful for monitoring
purposes: a large positive value is good, while zero or a negative value
means danger. This should be operationally more convenient.
Backpatch to 13, where the new column to pg_replication_slots (and the
feature it represents) were added.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Discussion: https://postgr.es/m/9ddfbf8c-2f67-904d-44ed-cf8bc5916228@oss.nttdata.com
nbtree index builds cannot write out an empty page. That would mean
that there was no way to create a pivot tuple pointing to the page one
level up, since _bt_truncate() generates one based on page's firstright
tuple.
Replace the unnecessary PageIsEmpty() check with an assertion that
checks that the page has space for at least two line pointers (the
would-be high key line pointer, plus at least one valid "data item"
tuple line pointer).
The PageIsEmpty() check was added by commit 5d9f146c over 20 years ago.
It looks like it has always been unnecessary.
Make some of the variable names in _bt_search() consistent with
corresponding variables within _bt_getstackbuf(). This naming scheme is
clearer because the variable names always express a relationship between
the currently locked buffer/page and some other page.
Use separate functions to save and restore error context information as
that made code easier to understand. Also, make it clear that the index
information required for error context is sane.
Author: Andres Freund, Justin Pryzby, Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/CAA4eK1LWo+v1OWu=Sky27GTGSCuOmr7iaURNbc5xz6jO+SaPeA@mail.gmail.com
Commit 0d861bbb, which added deduplication to nbtree, had
_bt_check_unique() pass a TID to table_index_fetch_tuple_check() that
isn't safe to mutate. table_index_fetch_tuple_check()'s tid argument is
modified when the TID in question is not the latest visible tuple in a
hot chain, though this wasn't documented.
To fix, go back to using a local copy of the TID in _bt_check_unique(),
and update comments above table_index_fetch_tuple_check().
Backpatch: 13-, where B-Tree deduplication was introduced.
In pg_replication_slot, change output from normal/reserved/lost to
reserved/extended/unreserved/ lost, which better expresses the possible
states particularly near the time where segments are no longer safe but
checkpoint has not run yet.
Under the new definition, reserved means the slot is consuming WAL
that's still under the normal WAL size constraints; extended means it's
consuming WAL that's being protected by wal_keep_segments or the slot
itself, whose size is below max_slot_wal_keep_size; unreserved means the
WAL is no longer safe, but checkpoint has not yet removed those files.
Such as slot is in imminent danger, but can still continue for a little
while and may catch up to the reserved WAL space.
Also, there were some bugs in the calculations used to report the
status; fixed those.
Backpatch to 13.
Reported-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200616.120236.1809496990963386593.horikyota.ntt@gmail.com
The current definition is dangerous. No bugs exist in our code at
present, but backpatch to 11 nonetheless where it was introduced.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
spg_mask() didn't take into account that pd_lower equal to SizeOfPageHeaderData
is still valid value. This commit fixes that. Backpatch to 11, where
spg_mask() pg_lower check was introduced.
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/20200615131405.GM52676%40paquier.xyz
Backpatch-through: 11
The function has been reading global variable forceSyncCommit, mirroring
the intent of the caller that passed forceSync=forceSyncCommit. The
other caller, RecordTransactionCommitPrepared(), passed false. Since
COMMIT PREPARED can't share a transaction with any command, it certainly
doesn't share a transaction with a command that sets forceSyncCommit.
Reviewed by Michael Paquier.
Discussion: https://postgr.es/m/20200617032615.GC2916904@rfd.leadboat.com
It was possible for deduplication's single value strategy to mistakenly
believe that a very small duplicate tuple counts as one of the six large
tuples that it aims to leave behind after the page finally splits. This
could cause slightly suboptimal space utilization with very low
cardinality indexes, though only under fairly narrow conditions.
To fix, be particular about what kind of tuple counts as a
maxpostingsize-capped tuple. This avoids confusion in the event of a
small tuple that gets "wedged" between two large tuples, where all
tuples on the page are duplicates of the same value.
Discussion: https://postgr.es/m/CAH2-Wz=Y+sgSFc-O3LpiZX-POx2bC+okec2KafERHuzdVa7-rQ@mail.gmail.com
Backpatch: 13-, where deduplication was introduced (by commit 0d861bbb)
Commit 72d422a522 made xlog.c call
sendTablespace() with the 'sizeonly' argument set to true, which
required basebackup.c to export sendTablespace(). However, that's
kind of ugly, so instead defer the call to sendTablespace() until
basebackup.c regains control. That way, it can still be a static
function.
Patch by me, reviewed by Amit Kapila and Kyotaro Horiguchi.
Discussion: http://postgr.es/m/CA+TgmoYq+59SJ2zBbP891ngWPA9fymOqntqYcweSDYXS2a620A@mail.gmail.com
Convert buffile.c error handling to use ereport. This fixes cases where
I/O errors were indistinguishable from EOF or not reported. Also remove
"%m" from error messages where errno would be bogus. While we're
modifying those strings, add block numbers and short read byte counts
where appropriate.
Back-patch to all supported releases.
Reported-by: Amit Khandekar <amitdkhan.pg@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Ibrar Ahmed <ibrar.ahmad@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGJE04G%3D8TLK0DLypT_27D9dR8F1RQgNp0jK6qR0tZGWOw%40mail.gmail.com
Core by no means makes excessive use of these functions, but quite a large
number of those usages do require the caller to call strlen() on the
returned string. This is quite wasteful since these functions do already
have a good idea of the length of the string, so we might as well just
have them return that.
Reviewed-by: Andrew Gierth
Discussion: https://postgr.es/m/CAApHDvrm2A5x2uHYxsqriO2cUaGcFvND%2BksC9e7Tjep0t2RK_A%40mail.gmail.com
Rewrite the documentation of these functions, in light of recent bug fix
commit 5940ffb2.
Back-patch to 13 where the check-for-conflict-out code was split up into
AM-specific and generic parts, and new documentation was added that now
looked wrong.
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/db7b729d-0226-d162-a126-8a8ab2dc4443%40jepsen.io
SSI's HeapCheckForSerializableConflictOut() test failed to correctly
handle conditions involving a concurrently inserted tuple which is later
concurrently updated by a separate transaction . A SELECT statement
that called HeapCheckForSerializableConflictOut() could end up using the
same XID (updater's XID) for both the original tuple, and the successor
tuple, missing the XID of the xact that created the original tuple
entirely. This only happened when neither tuple from the chain was
visible to the transaction's MVCC snapshot.
The observable symptoms of this bug were subtle. A pair of transactions
could commit, with the later transaction failing to observe the effects
of the earlier transaction (because of the confusion created by the
update to the non-visible row). This bug dates all the way back to
commit dafaa3ef, which added SSI.
To fix, make sure that we check the xmin of concurrently inserted tuples
that happen to also have been updated concurrently.
Author: Peter Geoghegan
Reported-By: Kyle Kingsbury
Reviewed-By: Thomas Munro
Discussion: https://postgr.es/m/db7b729d-0226-d162-a126-8a8ab2dc4443@jepsen.io
Backpatch: All supported versions
The redo routines for XLOG_CHECKPOINT_{ONLINE,SHUTDOWN} must acquire
ControlFileLock before modifying ControlFile->checkPointCopy, or the
checkpointer could write out a control file with a bad checksum.
Likewise, XLogReportParameters() must acquire ControlFileLock before
modifying ControlFile and calling UpdateControlFile().
Back-patch to all supported releases.
Author: Nathan Bossart <bossartn@amazon.com>
Author: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/70BF24D6-DC51-443F-B55A-95735803842A%40amazon.com
Since database connections can be used with WAL senders in 9.4, it is
possible to use physical replication. This commit fixes a crash when
starting physical replication with a WAL sender using a database
connection, caused by the refactoring done in 850196b.
There have been discussions about forbidding the use of physical
replication in a database connection, but this is left for later,
taking care only of the crash new to 13.
While on it, add a test to check for a failure when attempting logical
replication if the WAL sender does not have a database connection. This
part is extracted from a larger patch by Kyotaro Horiguchi.
Reported-by: Vladimir Sitnikov
Author: Michael Paquier, Kyotaro Horiguchi
Reviewed-by: Kyotaro Horiguchi, Álvaro Herrera
Discussion: https://postgr.es/m/CAB=Je-GOWMj1PTPkeUhjqQp-4W3=nW-pXe2Hjax6rJFffB5_Aw@mail.gmail.com
Backpatch-through: 13
Peter Geoghegan
Alexander Korotkov
Noah Misch
Tom Lane
Thomas Munro
Michael Paquier
Fujii Masao
David Rowley
Amit Kapila
Alvaro Herrera
Andres Freund
Robert Haas
Peter Eisentraut