The error message for a missing or invalid system CA when using
sslrootcert=system differs based on the OpenSSL version used.
In OpenSSL 1.0.1-3.0 it is reported as SSL Error, with varying
degrees of helpfulness in the error message. With OpenSSL 3.1 it
is reported as an SSL SYSCALL error with "Undefined error" as
the error message. This fix pulls out the particular error in
OpenSSL 3.1 as a certificate verify error in order to help the
user better figure out what happened, and to keep the ssl test
working. While there is no evidence that extracing the errors
will clobber errno, this adds a guard against that regardless
to also make the consistent with how we handle OpenSSL errors
elsewhere. It also memorizes the output from OpenSSL 3.0 in
the test in cases where the system CA isn't responding.
Reported-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/c39be3c5-c1a5-1e33-1024-16f527e251a4@enterprisedb.com
This adds a new option to libpq's sslrootcert, "system", which will load
the system trusted CA roots for certificate verification. This is a more
convenient way to achieve this than pointing to the system CA roots
manually since the location can differ by installation and be locally
adjusted by env vars in OpenSSL.
When sslrootcert is set to system, sslmode is forced to be verify-full
as weaker modes aren't providing much security for public CAs.
Changing the location of the system roots by setting environment vars is
not supported by LibreSSL so the tests will use a heuristic to determine
if the system being tested is LibreSSL or OpenSSL.
The workaround in .cirrus.yml is required to handle a strange interaction
between homebrew and the openssl@3 formula; hopefully this can be removed
in the near future.
The original patch was written by Thomas Habets, which was later revived
by Jacob Champion.
Author: Jacob Champion <jchampion@timescale.com>
Author: Thomas Habets <thomas@habets.se>
Reviewed-by: Jelte Fennema <postgres@jeltef.nl>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: Magnus Hagander <magnus@hagander.net>
Discussion: https://www.postgresql.org/message-id/flat/CA%2BkHd%2BcJwCUxVb-Gj_0ptr3_KZPwi3%2B67vK6HnLFBK9MzuYrLA%40mail.gmail.com
The sslcertmode option controls whether the server is allowed and/or
required to request a certificate from the client. There are three
modes:
- "allow" is the default and follows the current behavior, where a
configured client certificate is sent if the server requests one
(via one of its default locations or sslcert). With the current
implementation, will happen whenever TLS is negotiated.
- "disable" causes the client to refuse to send a client certificate
even if sslcert is configured or if a client certificate is available in
one of its default locations.
- "require" causes the client to fail if a client certificate is never
sent and the server opens a connection anyway. This doesn't add any
additional security, since there is no guarantee that the server is
validating the certificate correctly, but it may helpful to troubleshoot
more complicated TLS setups.
sslcertmode=require requires SSL_CTX_set_cert_cb(), available since
OpenSSL 1.0.2. Note that LibreSSL does not include it.
Using a connection parameter different than require_auth has come up as
the simplest design because certificate authentication does not rely
directly on any of the AUTH_REQ_* codes, and one may want to require a
certificate to be sent in combination of a given authentication method,
like SCRAM-SHA-256.
TAP tests are added in src/test/ssl/, some of them relying on sslinfo to
check if a certificate has been set. These are compatible across all
the versions of OpenSSL supported on HEAD (currently down to 1.0.1).
Author: Jacob Champion
Reviewed-by: Aleksander Alekseev, Peter Eisentraut, David G. Johnston,
Michael Paquier
Discussion: https://postgr.es/m/9e5a8ccddb8355ea9fa4b75a1e3a9edc88a70cd3.camel@vmware.com
OpenSSL 1.1.1 and newer versions have added support for RSA-PSS
certificates, which requires the use of a specific routine in OpenSSL to
determine which hash function to use when compiling it when using
channel binding in SCRAM-SHA-256. X509_get_signature_nid(), that is the
original routine the channel binding code has relied on, is not able to
determine which hash algorithm to use for such certificates. However,
X509_get_signature_info(), new to OpenSSL 1.1.1, is able to do it. This
commit switches the channel binding logic to rely on
X509_get_signature_info() over X509_get_signature_nid(), which would be
the choice when building with 1.1.1 or newer.
The error could have been triggered on the client or the server, hence
libpq and the backend need to have their related code paths patched.
Note that attempting to load an RSA-PSS certificate with OpenSSL 1.1.0
or older leads to a failure due to an unsupported algorithm.
The discovery of relying on X509_get_signature_info() comes from Jacob,
the tests have been written by Heikki (with few tweaks from me), while I
have bundled the whole together while adding the bits needed for MSVC
and meson.
This issue exists since channel binding exists, so backpatch all the way
down. Some tests are added in 15~, triggered if compiling with OpenSSL
1.1.1 or newer, where the certificate and key files can easily be
generated for RSA-PSS.
Reported-by: Gunnar "Nick" Bluth
Author: Jacob Champion, Heikki Linnakangas
Discussion: https://postgr.es/m/17760-b6c61e752ec07060@postgresql.org
Backpatch-through: 11
Currently, PQsslAttributeNames() returns the same list of attribute
names regardless of its conn parameter. This patch changes it to
have behavior parallel to what 80a05679d installed for PQsslAttribute:
you get OpenSSL's attributes if conn is NULL or is an SSL-encrypted
connection, or an empty list if conn is a non-encrypted connection.
The point of this is to have sensible connection-dependent behavior
in case we ever support multiple SSL libraries. The behavior for
NULL can be defined as "the attributes for the default SSL library",
parallel to what PQsslAttribute(NULL, "library") does.
Since this is mostly just future-proofing, no back-patch.
Discussion: https://postgr.es/m/17625-fc47c78b7d71b534@postgresql.org
Commit ebc8b7d44 intended to change the behavior of
PQsslAttribute(NULL, "library"), but accidentally also changed
what happens with a non-NULL conn pointer. Undo that so that
only the intended behavior change happens. Clarify some
associated documentation.
Per bug #17625 from Heath Lord. Back-patch to v15.
Discussion: https://postgr.es/m/17625-fc47c78b7d71b534@postgresql.org
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in optimizer, parser,
utility, libpq, and "commands" code, as well as in remaining library
code. Do the same for all code related to frontend programs (with the
exception of pg_dump/pg_dumpall related code).
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will handle
ecpg and pg_dump/pg_dumpall.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
There's a convention that externally-visible libpq functions should
check for a NULL PGconn pointer, and fail gracefully instead of
crashing. PQflush() and PQisnonblocking() didn't get that memo
though. Also add a similar check to PQdefaultSSLKeyPassHook_OpenSSL;
while it's not clear that ordinary usage could reach that with a
null conn pointer, it's cheap enough to check, so let's be consistent.
Daniele Varrazzo and Tom Lane
Discussion: https://postgr.es/m/CA+mi_8Zm_mVVyW1iNFgyMd9Oh0Nv8-F+7Y3-BqwMgTMHuo_h2Q@mail.gmail.com
Commits a59c79564 et al. tried to sync libpq's SSL key file
permissions checks with what we've used for years in the backend.
We did not intend to create any new failure cases, but it turns out
we did: restricting the key file's ownership breaks cases where the
client is allowed to read a key file despite not having the identical
UID. In particular a client running as root used to be able to read
someone else's key file; and having seen that I suspect that there are
other, less-dubious use cases that this restriction breaks on some
platforms.
We don't really need an ownership check, since if we can read the key
file despite its having restricted permissions, it must have the right
ownership --- under normal conditions anyway, and the point of this
patch is that any additional corner cases where that works should be
deemed allowable, as they have been historically. Hence, just drop
the ownership check, and rearrange the permissions check to get rid
of its faulty assumption that geteuid() can't be zero. (Note that the
comparable backend-side code doesn't have to cater for geteuid() == 0,
since the server rejects that very early on.)
This does have the end result that the permissions safety check used
for a root user's private key file is weaker than that used for
anyone else's. While odd, root really ought to know what she's doing
with file permissions, so I think this is acceptable.
Per report from Yogendra Suralkar. Like the previous patch,
back-patch to all supported branches.
Discussion: https://postgr.es/m/MW3PR15MB3931DF96896DC36D21AFD47CA3D39@MW3PR15MB3931.namprd15.prod.outlook.com
The current implementation supports exactly one IP address in a server
certificate's Common Name, which is brittle (the strings must match
exactly). This patch adds support for IPv4 and IPv6 addresses in a
server's Subject Alternative Names.
Per discussion on-list:
- If the client's expected host is an IP address, we allow fallback to
the Subject Common Name if an iPAddress SAN is not present, even if
a dNSName is present. This matches the behavior of NSS, in
violation of the relevant RFCs.
- We also, counter-intuitively, match IP addresses embedded in dNSName
SANs. From inspection this appears to have been the behavior since
the SAN matching feature was introduced in acd08d76.
- Unlike NSS, we don't map IPv4 to IPv6 addresses, or vice-versa.
Author: Jacob Champion <pchampion@vmware.com>
Co-authored-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Co-authored-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/flat/9f5f20974cd3a4091a788cf7f00ab663d5fcdffe.camel@vmware.com
Currently, libpq client code must have a connection handle
before it can query the "library" SSL attribute. This poses
problems if the client needs to know what SSL library is in
use before constructing a connection string.
Allow PQsslAttribute(NULL, "library") to return the library
in use -- currently, just "OpenSSL" or NULL. The new behavior
is announced with the LIBPQ_HAS_SSL_LIBRARY_DETECTION feature
macro, allowing clients to differentiate between a libpq that
was compiled without SSL support and a libpq that's just too
old to tell.
Author: Jacob Champion <pchampion@vmware.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/4c8b76ef434a96627170a31c3acd33cbfd6e41f1.camel@vmware.com
This change makes libpq apply the same private-key-file ownership
and permissions checks that we have used in the backend since commit
9a83564c5. Namely, that the private key can be owned by either the
current user or root (with different file permissions allowed in the
two cases). This allows system-wide management of key files, which
is just as sensible on the client side as the server, particularly
when the client is itself some application daemon.
Sync the comments about this between libpq and the backend, too.
David Steele
Discussion: https://postgr.es/m/f4b7bc55-97ac-9e69-7398-335e212f7743@pgmasters.net
In commit 1f39a1c06 I made PQisBusy consider conn->write_failed, but
that is now looking like complete brain fade. In the first place, the
logic is quite wrong: it ought to be like "and not" rather than "or".
This meant that once we'd gotten into a write_failed state, PQisBusy
would always return true, probably causing the calling application to
iterate its loop until PQconsumeInput returns a hard failure thanks
to connection loss. That's not what we want: the intended behavior
is to return an error PGresult, which the application probably has
much cleaner support for.
But in the second place, checking write_failed here seems like the
wrong thing anyway. The idea of the write_failed mechanism is to
postpone handling of a write failure until we've read all we can from
the server; so that flag should not interfere with input-processing
behavior. (Compare 7247e243a.) What we *should* check for is
status = CONNECTION_BAD, ie, socket already closed. (Most places that
close the socket don't touch asyncStatus, but they do reset status.)
This primarily ensures that if PQisBusy() returns true then there is
an open socket, which is assumed by several call sites in our own
code, and probably other applications too.
While at it, fix a nearby thinko in libpq's my_sock_write: we should
only consult errno for res < 0, not res == 0. This is harmless since
pqsecure_raw_write would force errno to zero in such a case, but it
still could confuse readers.
Noted by Andres Freund. Backpatch to v12 where 1f39a1c06 came in.
Discussion: https://postgr.es/m/20220211011025.ek7exh6owpzjyudn@alap3.anarazel.de
If the stat operation on the private key failed, the code assumed it
was due to an ENOENT, which may or may not be true. Extend the check
by printing a different error message on non-ENOENT errors for easier
debugging.
Per suggestion by Tom Lane due to an issue with the fairywren animal
in the buildfarm.
Discussion: https://postgr.es/m/1632478.1638305700@sss.pgh.pa.us
After further investigation, it seems the cause of the problem
is our recent decision to start defining WIN32_LEAN_AND_MEAN.
That causes <windows.h> to no longer include <wincrypt.h>, which
means that the OpenSSL headers are unable to prevent conflicts
with that header by #undef'ing the conflicting macros. Apparently,
some other system header that be-secure-openssl.c #includes after
the OpenSSL headers is pulling in <wincrypt.h>. It's obscure just
where that happens and why we're not seeing it on other Windows
buildfarm animals. However, it should work to move the OpenSSL
#includes to the end of the list. For the sake of future-proofing,
do likewise in fe-secure-openssl.c. In passing, remove useless
double inclusions of <openssl/ssl.h>.
Thanks to Thomas Munro for running down the relevant information.
Discussion: https://postgr.es/m/1051867.1635720347@sss.pgh.pa.us
In OpenSSL there are two types of BIO's (I/O abstractions):
source/sink and filters. A source/sink BIO is a source and/or
sink of data, ie one acting on a socket or a file. A filter
BIO takes a stream of input from another BIO and transforms it.
In order for BIO_find_type() to be able to traverse the chain
of BIO's and correctly find all BIO's of a certain type they
shall have the type bit set accordingly, source/sink BIO's
(what PostgreSQL implements) use BIO_TYPE_SOURCE_SINK and
filter BIO's use BIO_TYPE_FILTER. In addition to these, file
descriptor based BIO's should have the descriptor bit set,
BIO_TYPE_DESCRIPTOR.
The PostgreSQL implementation didn't set the type bits, which
went unnoticed for a long time as it's only really relevant
for code auditing the OpenSSL installation, or doing similar
tasks. It is required by the API though, so this fixes it.
Backpatch through 9.6 as this has been wrong for a long time.
Author: Itamar Gafni
Discussion: https://postgr.es/m/SN6PR06MB39665EC10C34BB20956AE4578AF39@SN6PR06MB3966.namprd06.prod.outlook.com
Backpatch-through: 9.6
The check for sslsni only checked for existence of the parameter
but not for the actual value of the param. This meant that the
SNI extension was always turned on. Fix by inspecting the value
of sslsni and only activate the SNI extension iff sslsni has been
enabled. Also update the docs to be more in line with how other
boolean params are documented.
Backpatch to 14 where sslsni was first implemented.
Reviewed-by: Tom Lane
Backpatch-through: 14, where sslni was added
Doing an abort() seems all right in development builds, but not in
production builds of general-purpose libraries. However, the functions
that were doing this lack any way to report a failure back up to their
callers. It seems like we can just get away with ignoring failures in
production builds, since (a) no such failures have been reported in the
dozen years that the code's been like this, and (b) failure to enforce
mutual exclusion during fe-auth.c operations would likely not cause any
problems anyway in most cases. (The OpenSSL callbacks that use this
macro are obsolete, so even less likely to cause interesting problems.)
Possibly a better answer would be to break compatibility of the
pgthreadlock_t callback API, but in the absence of field problem
reports, it doesn't really seem worth the trouble.
Discussion: https://postgr.es/m/3131385.1624746109@sss.pgh.pa.us
Fix handling of NULL host name (possibly by using hostaddr). It
previously crashed. Also, we should look at connhost, not pghost, to
handle multi-host specifications.
Also remove an unnecessary SSL_CTX_free().
Reported-by: Jacob Champion <pchampion@vmware.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/504c276ab6eee000bb23d571ea9b0ced4250774e.camel@vmware.com
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
By default, have libpq set the TLS extension "Server Name Indication" (SNI).
This allows an SNI-aware SSL proxy to route connections. (This
requires a proxy that is aware of the PostgreSQL protocol, not just
any SSL proxy.)
In the future, this could also allow the server to use different SSL
certificates for different host specifications. (That would require
new server functionality. This would be the client-side functionality
for that.)
Since SNI makes the host name appear in cleartext in the network
traffic, this might be undesirable in some cases. Therefore, also add
a libpq connection option "sslsni" to turn it off.
Discussion: https://www.postgresql.org/message-id/flat/7289d5eb-62a5-a732-c3b9-438cee2cb709%40enterprisedb.com
Based on an analysis of the OpenSSL code with Jacob, moving to EVP for
the cryptohash computations makes necessary the setup of the libcrypto
callbacks that were getting set only for SSL connections, but not for
connections without SSL. Not setting the callbacks makes the use of
threads potentially unsafe for connections calling cryptohashes during
authentication, like MD5 or SCRAM, if a failure happens during a
cryptohash computation. The logic setting the libssl and libcrypto
states is then split into two parts, both using the same locking, with
libcrypto being set up for SSL and non-SSL connections, while SSL
connections set any libssl state afterwards as needed.
Prior to this commit, only SSL connections would have set libcrypto
callbacks that are necessary to ensure a proper thread locking when
using multiple concurrent threads in libpq (ENABLE_THREAD_SAFETY). Note
that this is only required for OpenSSL 1.0.2 and 1.0.1 (oldest version
supported on HEAD), as 1.1.0 has its own internal locking and it has
dropped support for CRYPTO_set_locking_callback().
Tests with up to 300 threads with OpenSSL 1.0.1 and 1.0.2, mixing SSL
and non-SSL connection threads did not show any performance impact after
some micro-benchmarking. pgbench can be used here with -C and a
mostly-empty script (with one \set meta-command for example) to stress
authentication requests, and we have mixed that with some custom
programs for testing.
Reported-by: Jacob Champion
Author: Michael Paquier
Reviewed-by: Jacob Champion
Discussion: https://postgr.es/m/fd3ba610085f1ff54623478cf2f7adf5af193cbb.camel@vmware.com
This partially reverts 096bbf7 and 9d2d457, undoing the libpq changes as
it could cause breakages in distributions that share one single libpq
version across multiple major versions of Postgres for extensions and
applications linking to that.
Note that the backend is unchanged here, and it still disables SSL
compression while simplifying the underlying catalogs that tracked if
compression was enabled or not for a SSL connection.
Per discussion with Tom Lane and Daniel Gustafsson.
Discussion: https://postgr.es/m/YEbq15JKJwIX+S6m@paquier.xyz
PostgreSQL disabled compression as of e3bdb2d and the documentation
recommends against using it since. Additionally, SSL compression has
been disabled in OpenSSL since version 1.1.0, and was disabled in many
distributions long before that. The most recent TLS version, TLSv1.3,
disallows compression at the protocol level.
This commit removes the feature itself, removing support for the libpq
parameter sslcompression (parameter still listed for compatibility
reasons with existing connection strings, just ignored), and removes
the equivalent field in pg_stat_ssl and de facto PgBackendSSLStatus.
Note that, on top of removing the ability to activate compression by
configuration, compression is actively disabled in both frontend and
backend to avoid overrides from local configurations.
A TAP test is added for deprecated SSL parameters to check after
backwards compatibility.
Bump catalog version.
Author: Daniel Gustafsson
Reviewed-by: Peter Eisentraut, Magnus Hagander, Michael Paquier
Discussion: https://postgr.es/m/7E384D48-11C5-441B-9EC3-F7DB1F8518F6@yesql.se
Add another method to specify CRLs, hashed directory method, for both
server and client side. This offers a means for server or libpq to
load only CRLs that are required to verify a certificate. The CRL
directory is specifed by separate GUC variables or connection options
ssl_crl_dir and sslcrldir, alongside the existing ssl_crl_file and
sslcrl, so both methods can be used at the same time.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/20200731.173911.904649928639357911.horikyota.ntt@gmail.com
The callback for retrieving state change information during connection
setup was only installed when the connection was mostly set up, and
thus didn't provide much information and missed all the details related
to the handshake.
This also extends the callback with SSL_state_string_long() to print
more information about the state change within the SSL object handled.
While there, fix some comments which were incorrectly referring to the
callback and its previous location in fe-secure.c.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/232CF476-94E1-42F1-9408-719E2AEC5491@yesql.se
Previously, we had an undisciplined mish-mash of printfPQExpBuffer and
appendPQExpBuffer calls to report errors within libpq. This commit
establishes a uniform rule that appendPQExpBuffer[Str] should be used.
conn->errorMessage is reset only at the start of an application request,
and then accumulates messages till we're done. We can remove no less
than three different ad-hoc mechanisms that were used to get the effect
of concatenation of error messages within a sequence of operations.
Although this makes things quite a bit cleaner conceptually, the main
reason to do it is to make the world safer for the multiple-target-host
feature that was added awhile back. Previously, there were many cases
in which an error occurring during an individual host connection attempt
would wipe out the record of what had happened during previous attempts.
(The reporting is still inadequate, in that it can be hard to tell which
host got the failure, but that seems like a matter for a separate commit.)
Currently, lo_import and lo_export contain exceptions to the "never
use printfPQExpBuffer" rule. If we changed them, we'd risk reporting
an incidental lo_close failure before the actual read or write
failure, which would be confusing, not least because lo_close happened
after the main failure. We could improve this by inventing an
internal version of lo_close that doesn't reset the errorMessage; but
we'd also need a version of PQfn() that does that, and it didn't quite
seem worth the trouble for now.
Discussion: https://postgr.es/m/BN6PR05MB3492948E4FD76C156E747E8BC9160@BN6PR05MB3492.namprd05.prod.outlook.com
OpenSSL's native reports about problems related to protocol version
restrictions are pretty opaque and inconsistent. When we get an
SSL error that is plausibly due to this, emit a hint message that
includes the range of SSL protocol versions we (think we) are
allowing. This should at least get the user thinking in the right
direction to resolve the problem, even if the hint isn't totally
accurate, which it might not be for assorted reasons.
Back-patch to v13 where we increased the default minimum protocol
version, thereby increasing the risk of this class of failure.
Patch by me, reviewed by Daniel Gustafsson
Discussion: https://postgr.es/m/a9408304-4381-a5af-d259-e55d349ae4ce@2ndquadrant.com
libpq's exports.txt was overlooked in commit 36d108761, which the
buildfarm is quite unhappy about.
Also, I'd gathered that the plan included renaming PQgetSSLKeyPassHook
to PQgetSSLKeyPassHook_OpenSSL, but that didn't happen in the patch
as committed. I'm taking it on my own authority to do so now, since
the window before beta1 is closing fast.
4dc6355210 provided a way for libraries and clients to modify how libpq
handles client certificate passphrases, by installing a hook. However,
these routines are quite specific to how OpenSSL works, so it's
misleading and not future-proof to have these names not refer to OpenSSL.
Change all the names to add "_OpenSSL" after "Hook", and fix the docs
accordingly.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/981DE552-E399-45C2-9F60-3F0E3770CC61@yesql.se
Thomas Munro fixed a longstanding annoyance in pg_bsd_indent, that
it would misformat lines containing IsA() macros on the assumption
that the IsA() call should be treated like a cast. This improves
some other cases involving field/variable names that match typedefs,
too. The only places that get worse are a couple of uses of the
OpenSSL macro STACK_OF(); we'll gladly take that trade-off.
Discussion: https://postgr.es/m/20200114221814.GA19630@alvherre.pgsql
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
The libpq parameters ssl{max|min}protocolversion are renamed to use
underscores, to become ssl_{max|min}_protocol_version. The related
environment variables still use the names introduced in commit ff8ca5f
that added the feature.
Per complaint from Peter Eisentraut (this was also mentioned by me in
the original patch review but the issue got discarded).
Author: Daniel Gustafsson
Reviewed-by: Peter Eisentraut, Michael Paquier
Discussion: https://postgr.es/m/b319e449-318d-e691-4997-1327e166fcc4@2ndquadrant.com
Checking if Subject Alternative Names (SANs) from a certificate match
with the hostname connected to leaked memory after each lookup done.
This is broken since acd08d7 that added support for SANs in SSL
certificates, so backpatch down to 9.5.
Author: Roman Peshkurov
Reviewed-by: Hamid Akhtar, Michael Paquier, David Steele
Discussion: https://postgr.es/m/CALLDf-pZ-E3mjxd5=bnHsDu9zHEOnpgPgdnO84E2RuwMCjjyPw@mail.gmail.com
Backpatch-through: 9.5
The error exits added to initialize_SSL() failed to clean up the
partially-built SSL_context, and some of them also leaked the
result of SSLerrmessage(). Make them match other error-handling
cases in that function.
The error exits added to connectOptions2() failed to set conn->status
like every other error exit in that function.
In passing, make the SSL_get_peer_certificate() error exit look more
like all the other calls of SSLerrmessage().
Oversights in commit ff8ca5fad. Coverity whined about leakage of the
SSLerrmessage() results; I noted the rest in manual code review.
We used to strategically place newlines after some function call left
parentheses to make pgindent move the argument list a few chars to the
left, so that the whole line would fit under 80 chars. However,
pgindent no longer does that, so the newlines just made the code
vertically longer for no reason. Remove those newlines, and reflow some
of those lines for some extra naturality.
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20200129200401.GA6303@alvherre.pgsql
These two new parameters, named sslminprotocolversion and
sslmaxprotocolversion, allow to respectively control the minimum and the
maximum version of the SSL protocol used for the SSL connection attempt.
The default setting is to allow any version for both the minimum and the
maximum bounds, causing libpq to rely on the bounds set by the backend
when negotiating the protocol to use for an SSL connection. The bounds
are checked when the values are set at the earliest stage possible as
this makes the checks independent of any SSL implementation.
Author: Daniel Gustafsson
Reviewed-by: Michael Paquier, Cary Huang
Discussion: https://postgr.es/m/4F246AE3-A7AE-471E-BD3D-C799D3748E03@yesql.se
Support is out of scope from all the major vendors for these versions
(for example RHEL5 uses a version based on 0.9.8, and RHEL6 uses 1.0.1),
and it created some extra maintenance work. Upstream has stopped
support of 0.9.8 in December 2015 and of 1.0.0 in February 2016.
Since b1abfec, note that the default SSL protocol version set with
ssl_min_protocol_version is TLSv1.2, whose support was added in OpenSSL
1.0.1, so there is no point to enforce ssl_min_protocol_version to TLSv1
in the SSL tests.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson, Tom Lane
Discussion: https://postgr.es/m/20191205083252.GE5064@paquier.xyz
Daniel Gustafsson
Michael Paquier
Bruce Momjian
Peter Eisentraut
Tom Lane
Peter Geoghegan
Thomas Munro
Alvaro Herrera
Andrew Dunstan
Heikki Linnakangas