This commit adds the following functions:
box(point) -> box
bound_box(box, box) -> box
inet_same_family(inet, inet) -> bool
inet_merge(inet, inet) -> cidr
range_merge(anyrange, anyrange) -> anyrange
The first of these is also used to implement a new assignment cast from
point to box.
These functions are the first part of a base to implement an "inclusion"
operator class for BRIN, for multidimensional data types.
Author: Emre Hasegeli
Reviewed by: Andreas Karlsson
Foreign data wrappers can use this capability for so-called "join
pushdown"; that is, instead of executing two separate foreign scans
and then joining the results locally, they can generate a path which
performs the join on the remote server and then is scanned locally.
This commit does not extend postgres_fdw to take advantage of this
capability; it just provides the infrastructure.
Custom scan providers can use this in a similar way. Previously,
it was only possible for a custom scan provider to scan a single
relation. Now, it can scan an entire join tree, provided of course
that it knows how to produce the same results that the join would
have produced if executed normally.
KaiGai Kohei, reviewed by Shigeru Hanada, Ashutosh Bapat, and me.
In commit 31eae6028e, some documents were not updated to show the new
capability; fix that. Also, the error message you get when CURRENT_USER
and SESSION_USER are used in a context that doesn't accept them could be
clearer about it being a problem only in those contexts; so add the
word "here".
Author: Kyotaro HORIGUCHI
His patch submission also included changes to GRANT/REVOKE, but those
seemed more controversial, so I left them out. We can reconsider these
changes later.
This file isn't entirely consistent about whether "on" and "off"
should be marked up with <literal>, but it doesn't make much sense
to be inconsistent within a single sentence.
Etsuro Fujita
When implementing a replication solution ontop of logical decoding, two
related problems exist:
* How to safely keep track of replication progress
* How to change replication behavior, based on the origin of a row;
e.g. to avoid loops in bi-directional replication setups
The solution to these problems, as implemented here, consist out of
three parts:
1) 'replication origins', which identify nodes in a replication setup.
2) 'replication progress tracking', which remembers, for each
replication origin, how far replay has progressed in a efficient and
crash safe manner.
3) The ability to filter out changes performed on the behest of a
replication origin during logical decoding; this allows complex
replication topologies. E.g. by filtering all replayed changes out.
Most of this could also be implemented in "userspace", e.g. by inserting
additional rows contain origin information, but that ends up being much
less efficient and more complicated. We don't want to require various
replication solutions to reimplement logic for this independently. The
infrastructure is intended to be generic enough to be reusable.
This infrastructure also replaces the 'nodeid' infrastructure of commit
timestamps. It is intended to provide all the former capabilities,
except that there's only 2^16 different origins; but now they integrate
with logical decoding. Additionally more functionality is accessible via
SQL. Since the commit timestamp infrastructure has also been introduced
in 9.5 (commit 73c986add) changing the API is not a problem.
For now the number of origins for which the replication progress can be
tracked simultaneously is determined by the max_replication_slots
GUC. That GUC is not a perfect match to configure this, but there
doesn't seem to be sufficient reason to introduce a separate new one.
Bumps both catversion and wal page magic.
Author: Andres Freund, with contributions from Petr Jelinek and Craig Ringer
Reviewed-By: Heikki Linnakangas, Petr Jelinek, Robert Haas, Steve Singer
Discussion: 20150216002155.GI15326@awork2.anarazel.de,
20140923182422.GA15776@alap3.anarazel.de,
20131114172632.GE7522@alap2.anarazel.de
The original security barrier view implementation, on which RLS is
built, prevented all non-leakproof functions from being pushed down to
below the view, even when the function was not receiving any data from
the view. This optimization improves on that situation by, instead of
checking strictly for non-leakproof functions, it checks for Vars being
passed to non-leakproof functions and allows functions which do not
accept arguments or whose arguments are not from the current query level
(eg: constants can be particularly useful) to be pushed down.
As discussed, this does mean that a function which is pushed down might
gain some idea that there are rows meeting a certain criteria based on
the number of times the function is called, but this isn't a
particularly new issue and the documentation in rules.sgml already
addressed similar covert-channel risks. That documentation is updated
to reflect that non-leakproof functions may be pushed down now, if
they meet the above-described criteria.
Author: Dean Rasheed, with a bit of rework to make things clearer,
along with comment and documentation updates from me.
This provides a mechanism for specifying conversions between SQL data
types and procedural languages. As examples, there are transforms
for hstore and ltree for PL/Perl and PL/Python.
reviews by Pavel Stěhule and Andres Freund
The RLS capability is built on top of the WITH CHECK OPTION
system which was added for auto-updatable views, however, unlike
WCOs on views (which are mandated by the SQL spec to not fire until
after all other constraints and checks are done), it makes much more
sense for RLS checks to happen earlier than constraint and uniqueness
checks.
This patch reworks the structure which holds the WCOs a bit to be
explicitly either VIEW or RLS checks and the RLS-related checks are
done prior to the constraint and uniqueness checks. This also allows
better error reporting as we are now reporting when a violation is due
to a WITH CHECK OPTION and when it's due to an RLS policy violation,
which was independently noted by Craig Ringer as being confusing.
The documentation is also updated to include a paragraph about when RLS
WITH CHECK handling is performed, as there have been a number of
questions regarding that and the documentation was previously silent on
the matter.
Author: Dean Rasheed, with some kabitzing and comment changes by me.
It was previously mixed in with the description of ALTER TABLE
subcommands. Move it to the Parameters section, which is where it is on
other reference pages.
pointed out by Amit Langote
Right now it is visible whether a replication slot is active in any
session, but not in which. Adding the active_in column, containing the
pid of the backend having acquired the slot, makes it much easier to
associate pg_replication_slots entries with the corresponding
pg_stat_replication/pg_stat_activity row.
This should have been done from the start, but I (Andres) dropped the
ball there somehow.
Author: Craig Ringer, revised by me Discussion:
CAMsr+YFKgZca5_7_ouaMWxA5PneJC9LNViPzpDHusaPhU9pA7g@mail.gmail.com
Previously, these functions were created in a schema "binary_upgrade",
which was deleted after pg_upgrade was finished. Because we don't want
to keep that schema around permanently, move them to pg_catalog but
rename them with a binary_upgrade_... prefix.
The provided functions are only small wrappers around global variables
that were added specifically for pg_upgrade use, so keeping the module
separate does not create any modularity.
The functions still check that they are only called in binary upgrade
mode, so it is not possible to call these during normal operation.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
This view shows information about all connections, such as if the
connection is using SSL, which cipher is used, and which client
certificate (if any) is used.
Reviews by Alex Shulgin, Heikki Linnakangas, Andres Freund & Michael Paquier
FORCE option has been marked "obsolete" since very old version 7.4
but existed for backwards compatibility. Per discussion on pgsql-hackers,
we concluded that it's no longer worth keeping supporting the option.
It now also reports temporary objects dropped that are local to the
backend. Previously we weren't reporting any temp objects because it
was deemed unnecessary; but as it turns out, it is necessary if we want
to keep close track of DDL command execution inside one session. Temp
objects are reported as living in schema pg_temp, which works because
such a schema-qualification always refers to the temp objects of the
current session.
Reduce lock levels to ShareRowExclusive for the following SQL
CREATE TRIGGER (but not DROP or ALTER)
ALTER TABLE ENABLE TRIGGER
ALTER TABLE DISABLE TRIGGER
ALTER TABLE … ADD CONSTRAINT FOREIGN KEY
Original work by Simon Riggs, extracted and refreshed by Andreas Karlsson
New test cases added by Andreas Karlsson
Reviewed by Noah Misch, Andres Freund, Michael Paquier and Simon Riggs
This is useful to control autovacuum log volume, for situations where
monitoring only a set of tables is necessary.
Author: Michael Paquier
Reviewed by: A team led by Naoya Anzai (also including Akira Kurosawa,
Taiki Kondo, Huong Dangminh), Fujii Masao.
This is the second try at this, after fcef161729 failed miserably and
had to be reverted: as it turns out, libpq cannot depend on libpgcommon
after all. Instead of shuffling code in the master branch, make that one
just like 9.4 and accept the duplication. (This was all my own mistake,
not the patch submitter's).
psql was already accepting conninfo strings as the first parameter in
\connect, but the way it worked wasn't sane; some of the other
parameters would get the previous connection's values, causing it to
connect to a completely unexpected server or, more likely, not finding
any server at all because of completely wrong combinations of
parameters.
Fix by explicitely checking for a conninfo-looking parameter in the
dbname position; if one is found, use its complete specification rather
than mix with the other arguments. Also, change tab-completion to not
try to complete conninfo/URI-looking "dbnames" and document that
conninfos are accepted as first argument.
There was a weak consensus to backpatch this, because while the behavior
of using the dbname as a conninfo is nowhere documented for \connect, it
is reasonable to expect that it works because it does work in many other
contexts. Therefore this is backpatched all the way back to 9.0.
Author: David Fetter, Andrew Dunstan. Some editorialization by me
(probably earning a Gierth's "Sloppy" badge in the process.)
Reviewers: Andrew Gierth, Erik Rijkers, Pavel Stěhule, Stephen Frost,
Robert Haas, Andrew Dunstan.
psql was already accepting conninfo strings as the first parameter in
\connect, but the way it worked wasn't sane; some of the other
parameters would get the previous connection's values, causing it to
connect to a completely unexpected server or, more likely, not finding
any server at all because of completely wrong combinations of
parameters.
Fix by explicitely checking for a conninfo-looking parameter in the
dbname position; if one is found, use its complete specification rather
than mix with the other arguments. Also, change tab-completion to not
try to complete conninfo/URI-looking "dbnames" and document that
conninfos are accepted as first argument.
There was a weak consensus to backpatch this, because while the behavior
of using the dbname as a conninfo is nowhere documented for \connect, it
is reasonable to expect that it works because it does work in many other
contexts. Therefore this is backpatched all the way back to 9.0.
To implement this, routines previously private to libpq have been
duplicated so that psql can decide what looks like a conninfo/URI
string. In back branches, just duplicate the same code all the way back
to 9.2, where URIs where introduced; 9.0 and 9.1 have a simpler version.
In master, the routines are moved to src/common and renamed.
Author: David Fetter, Andrew Dunstan. Some editorialization by me
(probably earning a Gierth's "Sloppy" badge in the process.)
Reviewers: Andrew Gierth, Erik Rijkers, Pavel Stěhule, Stephen Frost,
Robert Haas, Andrew Dunstan.
You're required to write either RANGE or ROWS to start a frame clause,
but the documentation incorrectly implied this is optional. Noted by
David Johnston.
... and rename it and its sibling array_offsets to array_position and
array_positions, to account for the changed behavior.
Having the functions return subscripts better matches existing practice,
and is better suited to using the result value as a subscript into the
array directly. For one-based arrays, the new definition is identical
to what was originally committed.
(We use the term "subscript" in the documentation, which is what we use
whenever we talk about arrays; but the functions themselves are named
using the word "position" to match the standard-defined POSITION()
functions.)
Author: Pavel Stěhule
Behavioral problem noted by Dean Rasheed.
If set, the pager will not be used unless this many lines are to be
displayed, even if that is more than the screen depth. Default is zero,
meaning it's disabled.
There is probably more work to be done in giving the user control over
when the pager is used, particularly when wide output forces use of the
pager regardless of how many lines there are, but this is a start.
The new fields are min_time, max_time, mean_time and stddev_time.
Based on an original patch from Mitsumasa KONDO, modified by me. Reviewed by Petr Jelínek.
This adds a new GiST opclass method, 'fetch', which is used to reconstruct
the original Datum from the value stored in the index. Also, the 'canreturn'
index AM interface function gains a new 'attno' argument. That makes it
possible to use index-only scans on a multi-column index where some of the
opclasses support index-only scans but some do not.
This patch adds support in the box and point opclasses. Other opclasses
can added later as follow-on patches (btree_gist would be particularly
interesting).
Anastasia Lubennikova, with additional fixes and modifications by me.
Previously, CHECK constraints of the same scope were checked in whatever
order they happened to be read from pg_constraint. (Usually, but not
reliably, this would be creation order for domain constraints and reverse
creation order for table constraints, because of differing implementation
details.) Nondeterministic results of this sort are problematic at least
for testing purposes, and in discussion it was agreed to be a violation of
the principle of least astonishment. Therefore, borrow the principle
already established for triggers, and apply such checks in name order
(using strcmp() sort rules). This lets users control the check order
if they have a mind to.
Domain CHECK constraints still follow the rule of checking lower nested
domains' constraints first; the name sort only applies to multiple
constraints attached to the same domain.
In passing, I failed to resist the temptation to wordsmith a bit in
create_domain.sgml.
Apply to HEAD only, since this could result in a behavioral change in
existing applications, and the potential regression test failures have
not actually been observed in our buildfarm.
Earlier versions of this tool were available (and still are) on github.
Thanks to Michael Paquier, Alvaro Herrera, Peter Eisentraut, Amit Kapila,
and Satoshi Nagayasu for review.
Foreign tables can now be inheritance children, or parents. Much of the
system was already ready for this, but we had to fix a few things of
course, mostly in the area of planner and executor handling of row locks.
As side effects of this, allow foreign tables to have NOT VALID CHECK
constraints (and hence to accept ALTER ... VALIDATE CONSTRAINT), and to
accept ALTER SET STORAGE and ALTER SET WITH/WITHOUT OIDS. Continuing to
disallow these things would've required bizarre and inconsistent special
cases in inheritance behavior. Since foreign tables don't enforce CHECK
constraints anyway, a NOT VALID one is a complete no-op, but that doesn't
mean we shouldn't allow it. And it's possible that some FDWs might have
use for SET STORAGE or SET WITH OIDS, though doubtless they will be no-ops
for most.
An additional change in support of this is that when a ModifyTable node
has multiple target tables, they will all now be explicitly identified
in EXPLAIN output, for example:
Update on pt1 (cost=0.00..321.05 rows=3541 width=46)
Update on pt1
Foreign Update on ft1
Foreign Update on ft2
Update on child3
-> Seq Scan on pt1 (cost=0.00..0.00 rows=1 width=46)
-> Foreign Scan on ft1 (cost=100.00..148.03 rows=1170 width=46)
-> Foreign Scan on ft2 (cost=100.00..148.03 rows=1170 width=46)
-> Seq Scan on child3 (cost=0.00..25.00 rows=1200 width=46)
This was done mainly to provide an unambiguous place to attach "Remote SQL"
fields, but it is useful for inherited updates even when no foreign tables
are involved.
Shigeru Hanada and Etsuro Fujita, reviewed by Ashutosh Bapat and Kyotaro
Horiguchi, some additional hacking by me
The pg_stat and pg_signal-related functions have been using GetUserId()
instead of has_privs_of_role() for checking if the current user should
be able to see details in pg_stat_activity or signal other processes,
requiring a user to do 'SET ROLE' for inheirited roles for a permissions
check, unlike other permissions checks.
This patch changes that behavior to, instead, act like most other
permission checks and use has_privs_of_role(), removing the 'SET ROLE'
need. Documentation and error messages updated accordingly.
Per discussion with Alvaro, Peter, Adam (though not using Adam's patch),
and Robert.
Reviewed by Jeevan Chalke.
Somehow I misresolved a merge conflict when forward porting Petr's patch
leading to a section of the docs remaining...
Thankfully Fujii spotted my mistake.
Commit fe550b2ac2 missed updating this list
of the PGC_XXX values, which in hindsight is not so surprising because
catalogs.sgml is not a place you'd think to look for them. In addition to
adding the missing doco, insert the PGC_XXX C enum names in SGML comments,
so that grepping for the enum names will find this file. That might spare
the next person similar embarrassment.
Spotted by Magnus Hagander.
The introduction of min_wal_size & max_wal_size in 88e9823026 makes it
feasible to increase the default upper bound in checkpoint
size. Previously raising the default would lead to a increased disk
footprint, even if more segments weren't beneficial. The low default of
checkpoint size is one of common performance problem users have thus
increasing the default makes sense. Setups where the increase in
maximum disk usage is a problem will very likely have to run with a
modified configuration anyway.
Discussion: 54F4EFB8.40202@agliodbs.com,
CA+TgmoZEAgX5oMGJOHVj8L7XOkAe05Gnf45rP40m-K3FhZRVKg@mail.gmail.com
Author: Josh Berkus, after a discussion involving lots of people.
The new recovery_target_action (introduced in aedccb1f6/b8e33a85d4)
replaces it's functionality. Having both seems likely to cause more
confusion than it saves worry due to the incompatibility.
Discussion: 5484FC53.2060903@2ndquadrant.com
Author: Petr Jelinek
These APIs changed somewhat subsequent to the initial commit, and may
change further in the future, but let's document what we have today.
KaiGai Kohei and Robert Haas, reviewed by Tom Lane and Thom Brown
While the SQL standard is pretty vague on the overall topic of operator
precedence (because it never presents a unified BNF for all expressions),
it does seem reasonable to conclude from the spec for <boolean value
expression> that OR has the lowest precedence, then AND, then NOT, then IS
tests, then the six standard comparison operators, then everything else
(since any non-boolean operator in a WHERE clause would need to be an
argument of one of these).
We were only sort of on board with that: most notably, while "<" ">" and
"=" had properly low precedence, "<=" ">=" and "<>" were treated as generic
operators and so had significantly higher precedence. And "IS" tests were
even higher precedence than those, which is very clearly wrong per spec.
Another problem was that "foo NOT SOMETHING bar" constructs, such as
"x NOT LIKE y", were treated inconsistently because of a bison
implementation artifact: they had the documented precedence with respect
to operators to their right, but behaved like NOT (i.e., very low priority)
with respect to operators to their left.
Fixing the precedence issues is just a small matter of rearranging the
precedence declarations in gram.y, except for the NOT problem, which
requires adding an additional lookahead case in base_yylex() so that we
can attach a different token precedence to NOT LIKE and allied two-word
operators.
The bulk of this patch is not the bug fix per se, but adding logic to
parse_expr.c to allow giving warnings if an expression has changed meaning
because of these precedence changes. These warnings are off by default
and are enabled by the new GUC operator_precedence_warning. It's believed
that very few applications will be affected by these changes, but it was
agreed that a warning mechanism is essential to help debug any that are.
When newly-added GUC parameter, wal_compression, is on, the PostgreSQL server
compresses a full page image written to WAL when full_page_writes is on or
during a base backup. A compressed page image will be decompressed during WAL
replay. Turning this parameter on can reduce the WAL volume without increasing
the risk of unrecoverable data corruption, but at the cost of some extra CPU
spent on the compression during WAL logging and on the decompression during
WAL replay.
This commit changes the WAL format (so bumping WAL version number) so that
the one-byte flag indicating whether a full page image is compressed or not is
included in its header information. This means that the commit increases the
WAL volume one-byte per a full page image even if WAL compression is not used
at all. We can save that one-byte by borrowing one-bit from the existing field
like hole_offset in the header and using it as the flag, for example. But which
would reduce the code readability and the extensibility of the feature.
Per discussion, it's not worth paying those prices to save only one-byte, so we
decided to add the one-byte flag to the header.
This commit doesn't introduce any new compression algorithm like lz4.
Currently a full page image is compressed using the existing PGLZ algorithm.
Per discussion, we decided to use it at least in the first version of the
feature because there were no performance reports showing that its compression
ratio is unacceptably lower than that of other algorithm. Of course,
in the future, it's worth considering the support of other compression
algorithm for the better compression.
Rahila Syed and Michael Paquier, reviewed in various versions by myself,
Andres Freund, Robert Haas, Abhijit Menon-Sen and many others.
The introduction in the Shared Library Preloading section already
instructs the user to separate multiple library names with commas, so
just remove the fragment from here.
Author: Dagfinn Ilmari Mannsåker
SQL has standardized on => as the use of to specify named parameters,
and we've wanted for many years to support the same syntax ourselves,
but this has been complicated by the possible use of => as an operator
name. In PostgreSQL 9.0, we began emitting a warning when an operator
named => was defined, and in PostgreSQL 9.2, we stopped shipping a
=>(text, text) operator as part of hstore. By the time the next major
version of PostgreSQL is released, => will have been deprecated for a
full five years, so hopefully there won't be too many people still
relying on it. We continue to support := for compatibility with
previous PostgreSQL releases.
Pavel Stehule, reviewed by Petr Jelinek, with a few documentation
tweaks by me.
Commands such as ALTER USER, ALTER GROUP, ALTER ROLE, GRANT, and the
various ALTER OBJECT / OWNER TO, as well as ad-hoc clauses related to
roles such as the AUTHORIZATION clause of CREATE SCHEMA, the FOR clause
of CREATE USER MAPPING, and the FOR ROLE clause of ALTER DEFAULT
PRIVILEGES can now take the keywords CURRENT_USER and SESSION_USER as
user specifiers in place of an explicit user name.
This commit also fixes some quite ugly handling of special standards-
mandated syntax in CREATE USER MAPPING, which in particular would fail
to work in presence of a role named "current_user".
The special role specifiers PUBLIC and NONE also have more consistent
handling now.
Also take the opportunity to add location tracking to user specifiers.
Authors: Kyotaro Horiguchi. Heavily reworked by Álvaro Herrera.
Reviewed by: Rushabh Lathia, Adam Brightwell, Marti Raudsepp.
The SGML docs claimed that 1-byte integers could be sent or received with
the "isint" options, but no such behavior has ever been implemented in
pqGetInt() or pqPutInt(). The in-code documentation header for PQfn() was
even less in tune with reality, and the code itself used parameter names
matching neither the SGML docs nor its libpq-fe.h declaration. Do a bit
of additional wordsmithing on the SGML docs while at it.
Since the business about 1-byte integers is a clear documentation bug,
back-patch to all supported branches.
This role attribute is an ancient PostgreSQL feature, but could only be
set by directly updating the system catalogs, and it doesn't have any
clearly defined use.
Author: Adam Brightwell <adam.brightwell@crunchydatasolutions.com>
plpgsql's historical method for converting datatypes during assignments was
to apply the source type's output function and then the destination type's
input function. Aside from being miserably inefficient in most cases, this
method failed outright in many cases where a user might expect it to work;
an example is that "declare x int; ... x := 3.9;" would fail, not round the
value to 4.
Instead, let's convert by applying the appropriate assignment cast whenever
there is one. To avoid breaking compatibility unnecessarily, fall back to
the I/O conversion method if there is no assignment cast.
So far as I can tell, there is just one case where this method produces a
different result than the old code in a case where the old code would not
have thrown an error. That is assignment of a boolean value to a string
variable (type text, varchar, or bpchar); the old way gave boolean's output
representation, ie 't'/'f', while the new way follows the behavior of the
bool-to-text cast and so gives 'true' or 'false'. This will need to be
called out as an incompatibility in the 9.5 release notes.
Aside from handling many conversion cases more sanely, this method is
often significantly faster than the old way. In part that's because
of more effective caching of the conversion info.
Previously, you could do \set variable operand1 operator operand2, but
nothing more complicated. Now, you can \set variable expression, which
makes it much simpler to do multi-step calculations here. This also
adds support for the modulo operator (%), with the same semantics as in
C.
Robert Haas and Fabien Coelho, reviewed by Álvaro Herrera and
Stephen Frost
Since 9.1, we've provided extensions with a way to denote
"configuration" tables- tables created by an extension which the user
may modify. By marking these as "configuration" tables, the extension
is asking for the data in these tables to be pg_dump'd (tables which
are not marked in this way are assumed to be entirely handled during
CREATE EXTENSION and are not included at all in a pg_dump).
Unfortunately, pg_dump neglected to consider foreign key relationships
between extension configuration tables and therefore could end up
trying to reload the data in an order which would cause FK violations.
This patch teaches pg_dump about these dependencies, so that the data
dumped out is done so in the best order possible. Note that there's no
way to handle circular dependencies, but those have yet to be seen in
the wild.
The release notes for this should include a caution to users that
existing pg_dump-based backups may be invalid due to this issue. The
data is all there, but restoring from it will require extracting the
data for the configuration tables and then loading them in the correct
order by hand.
Discussed initially back in bug #6738, more recently brought up by
Gilles Darold, who provided an initial patch which was further reworked
by Michael Paquier. Further modifications and documentation updates
by me.
Back-patch to 9.1 where we added the concept of extension configuration
tables.
When a composite type being used in a typed table is modified by way
of ALTER TYPE, a table rewrite occurs appearing to come from ALTER TYPE.
The existing event_trigger.c code was unable to cope with that
and raised a spurious error. The fix is just to accept that command
tag for the event, and document this properly.
Noted while fooling with deparsing of DDL commands. This appears to be
an oversight in commit 618c9430a.
Thanks to Mark Wong for documentation wording help.
COMMENT, SECURITY LABEL, and GRANT/REVOKE now also fire
ddl_command_start and ddl_command_end event triggers, when they operate
on database-local objects.
Reviewed-By: Michael Paquier, Andres Freund, Stephen Frost
Instead of having a single knob (checkpoint_segments) that both triggers
checkpoints, and determines how many checkpoints to recycle, they are now
separate concerns. There is still an internal variable called
CheckpointSegments, which triggers checkpoints. But it no longer determines
how many segments to recycle at a checkpoint. That is now auto-tuned by
keeping a moving average of the distance between checkpoints (in bytes),
and trying to keep that many segments in reserve. The advantage of this is
that you can set max_wal_size very high, but the system won't actually
consume that much space if there isn't any need for it. The min_wal_size
sets a floor for that; you can effectively disable the auto-tuning behavior
by setting min_wal_size equal to max_wal_size.
The max_wal_size setting is now the actual target size of WAL at which a
new checkpoint is triggered, instead of the distance between checkpoints.
Previously, you could calculate the actual WAL usage with the formula
"(2 + checkpoint_completion_target) * checkpoint_segments + 1". With this
patch, you set the desired WAL usage with max_wal_size, and the system
calculates the appropriate CheckpointSegments with the reverse of that
formula. That's a lot more intuitive for administrators to set.
Reviewed by Amit Kapila and Venkata Balaji N.
Previously when the standby server failed to retrieve WAL files from any sources
(i.e., streaming replication, local pg_xlog directory or WAL archive), it always
waited for five seconds (hard-coded) before the next attempt. For example,
this is problematic in warm-standby because restore_command can fail
every five seconds even while new WAL file is expected to be unavailable for
a long time and flood the log files with its error messages.
This commit adds new parameter, wal_retrieve_retry_interval, to control that
wait time.
Alexey Vasiliev and Michael Paquier, reviewed by Andres Freund and me.
If libpq output buffer is full, pqSendSome() function tries to drain any
incoming data. This avoids deadlock, if the server e.g. sends a lot of
NOTICE messages, and blocks until we read them. However, pqSendSome() only
did that in blocking mode. In non-blocking mode, the deadlock could still
happen.
To fix, take a two-pronged approach:
1. Change the documentation to instruct that when PQflush() returns 1, you
should wait for both read- and write-ready, and call PQconsumeInput() if it
becomes read-ready. That fixes the deadlock, but applications are not going
to change overnight.
2. In pqSendSome(), drain the input buffer before returning 1. This
alleviates the problem for applications that only wait for write-ready. In
particular, a slow but steady stream of NOTICE messages during COPY FROM
STDIN will no longer cause a deadlock. The risk remains that the server
attempts to send a large burst of data and fills its output buffer, and at
the same time the client also sends enough data to fill its output buffer.
The application will deadlock if it goes to sleep, waiting for the socket
to become write-ready, before the server's data arrives. In practice,
NOTICE messages and such that the server might be sending are usually
short, so it's highly unlikely that the server would fill its output buffer
so quickly.
Backpatch to all supported versions.
Bootstrap determines whether a column is null based on simple builtin
rules. Those work surprisingly well, but nonetheless a few existing
columns aren't set correctly. Additionally there is at least one patch
sent to hackers where forcing the nullness of a column would be helpful.
The boostrap format has gained FORCE [NOT] NULL for this, which will be
emitted by genbki.pl when BKI_FORCE_(NOT_)?NULL is specified for a
column in a catalog header.
This patch doesn't change the marking of any existing columns.
Discussion: 20150215170014.GE15326@awork2.anarazel.de
Per discussion, this could be useful for purposes such as programmatically
detecting a nonresponding stats collector. We already have the timestamp
anyway, it's just a matter of providing a SQL-accessible function to fetch
it.
Matt Kelly, reviewed by Jim Nasby
While working on documentation for expanded arrays, I noticed a number of
details in the TOAST-related documentation that were already inaccurate or
obsolete. This should be fixed independently of whether expanded arrays
get in or not. One issue is that the already existing indirect-pointer
facility was not documented at all. Also, the documentation says that you
only need to use VARSIZE/SET_VARSIZE if you've made your variable-length
type TOAST-aware, but actually we've forced that business on all varlena
types even if they've opted out of TOAST by setting storage = plain.
Wordsmith a few other things too, like an amusingly archaic claim that
there are few 64-bit machines.
I thought about back-patching this, but since all this doco is oriented
to hackers and C-coded extension authors, fixing it in HEAD is probably
good enough.
In investigating yesterday's crash report from Hugo Osvaldo Barrera, I only
looked back as far as commit f3aec2c7f5 where the breakage occurred
(which is why I thought the IPv4-in-IPv6 business was undocumented). But
actually the logic dates back to commit 3c9bb8886d and was simply
broken by erroneous refactoring in the later commit. A bit of archives
excavation shows that we added the whole business in response to a report
that some 2003-era Linux kernels would report IPv4 connections as having
IPv4-in-IPv6 addresses. The fact that we've had no complaints since 9.0
seems to be sufficient confirmation that no modern kernels do that, so
let's just rip it all out rather than trying to fix it.
Do this in the back branches too, thus essentially deciding that our
effective behavior since 9.0 is correct. If there are any platforms on
which the kernel reports IPv4-in-IPv6 addresses as such, yesterday's fix
would have made for a subtle and potentially security-sensitive change in
the effective meaning of IPv4 pg_hba.conf entries, which does not seem like
a good thing to do in minor releases. So let's let the post-9.0 behavior
stand, and change the documentation to match it.
In passing, I failed to resist the temptation to wordsmith the description
of pg_hba.conf IPv4 and IPv6 address entries a bit. A lot of this text
hasn't been touched since we were IPv4-only.
When ecpg was rewritten to the new protocol version not all variable types
were corrected. This patch rewrites the code for these types to fix that. It
also fixes the documentation to correctly tell the status of array handling.
When beginning streaming replication, the client usually issues the
IDENTIFY_SYSTEM command, which used to return the current WAL insert
position. That's not suitable for the intended purpose of that field,
however. pg_receivexlog uses it to start replication from the reported
point, but if it hasn't been flushed to disk yet, it will fail. Change
IDENTIFY_SYSTEM to report the flush position instead.
Backpatch to 9.1 and above. 9.0 doesn't report any WAL position.
This makes it possible to query for things like the SSL version and cipher
used, without depending on OpenSSL functions or macros. That is a good
thing if we ever get another SSL implementation.
PQgetssl() still works, but it should be considered as deprecated as it
only works with OpenSSL. In particular, PQgetSslInUse() should be used to
check if a connection uses SSL, because as soon as we have another
implementation, PQgetssl() will return NULL even if SSL is in use.
Sometimes it's useful for a background worker to be able to initialize
its database connection by OID rather than by name, so provide a way
to do that.
The previous wording claimed that the file was always in /etc, but of
course this varies with the installation layout. Write instead that it
can be found via `pg_config --sysconfdir`. Even though this is still
somewhat incorrect because it doesn't account of moved installations, it
at least conveys that the location depends on the installation.
"ECHO all" is ignored for interactive input, and has been for a very long
time, though possibly not for as long as the documentation has claimed the
opposite. Fix that, and also note that empty lines aren't echoed, which
while dubious is another longstanding behavior (it's embedded in our
regression test files for one thing). Per bug #12721 from Hans Ginzel.
In HEAD, also improve the code comments in this area, and suppress an
unnecessary fflush(stdout) when we're not echoing. That would likely
be safe to back-patch, but I'll not risk it mere hours before a release
wrap.
As usual, the release notes for older branches will be made by cutting
these down, but put them up for community review first.
Note: a significant fraction of these items don't apply to 9.4.1, only to
older branches, because the fixes already appeared in 9.4.0. These can be
distinguished by noting the branch commits in the associated SGML comments.
This will be adjusted tomorrow while copying items into the older
release-X.Y.sgml files. In a few cases I've made two separate entries with
different wordings for 9.4 than for the equivalent commits in the older
branches.
In ALTER POLICY, use 'check_expression' instead of 'expression' for the
parameter, to match up with the recent CREATE POLICY change.
In CREATE POLICY, frame the discussion as granting access to rows
instead of limiting access to rows. Further, clarify that the
expression must return true for rows to be visible/allowed and that a
false or NULL result will mean the row is not visible/allowed.
Per discussion with Dean Rasheed and Robert.
We've been trying to support \u0000 in JSON values since commit
78ed8e03c6, and have introduced increasingly worse hacks to try to
make it work, such as commit 0ad1a81632. However, it fundamentally
can't work in the way envisioned, because the stored representation looks
the same as for \\u0000 which is not the same thing at all. It's also
entirely bogus to output \u0000 when de-escaped output is called for.
The right way to do this would be to store an actual 0x00 byte, and then
throw error only if asked to produce de-escaped textual output. However,
getting to that point seems likely to take considerable work and may well
never be practical in the 9.4.x series.
To preserve our options for better behavior while getting rid of the nasty
side-effects of 0ad1a81632, revert that commit in toto and instead
throw error if \u0000 is used in a context where it needs to be de-escaped.
(These are the same contexts where non-ASCII Unicode escapes throw error
if the database encoding isn't UTF8, so this behavior is by no means
without precedent.)
In passing, make both the \u0000 case and the non-ASCII Unicode case report
ERRCODE_UNTRANSLATABLE_CHARACTER / "unsupported Unicode escape sequence"
rather than claiming there's something wrong with the input syntax.
Back-patch to 9.4, where we have to do something because 0ad1a81632
broke things for many cases having nothing to do with \u0000. 9.3 also has
bogus behavior, but only for that specific escape value, so given the lack
of field complaints it seems better to leave 9.3 alone.
The parameter description for the using_expression and check_expression
in CREATE POLICY were unclear and arguably included a typo. Clarify
and improve the consistency of that language.
Pointed out by Dean Rasheed.
The syntax for CREATE POLICY simply used "expression" for the USING
expression, while the WITH CHECK expression was "check_expression".
Given that we have two expressions, it's sensible to explcitly name both
to maintain clarity.
This patch simply changes the generic "expression" to be
"using_expression".
Pointed out by Peter Geoghegan.
The CREATE POLICY documention didn't sufficiently clarify what happens
when a given command type (eg: ALL or UPDATE) accepts both USING and
WITH CHECK clauses, but only the USING clause is defined. Add language
to clarify that, in such a case, the USING clause will be used for both
USING and WITH CHECK cases.
Pointed out by Peter Geoghegan.
The row level security patches didn't add the 'usebypassrls' columns to
the pg_user and pg_shadow views on the belief that they were deprecated,
but we havn't actually said they are and therefore we should include it.
This patch corrects that, adds missing documentation for rolbypassrls
into the system catalog page for pg_authid, along with the entries for
pg_user and pg_shadow, and cleans up a few other uses of 'row-level'
cases to be 'row level' in the docs.
Pointed out by Amit Kapila.
Catalog version bump due to system view changes.
gist_poly_compress() and gist_circle_compress() checked for a NULL-pointer
key argument, but that was dead code; the gist code never passes a
NULL-pointer to the "compress" method.
This commit also removes a documentation note added in commit a0a3883,
about doing NULL-pointer checks in the "compress" method. It was added
based on the fact that some implementations were doing NULL-pointer
checks, but those checks were unnecessary in the first place.
The NULL-pointer check in gbt_var_same() function was also unnecessary.
The arguments to the "same" method come from the "compress", "union", or
"picksplit" methods, but none of them return a NULL pointer.
None of this is to be confused with SQL NULL values. Those are dealt with
by the gist machinery, and are never passed to the GiST opclass methods.
Michael Paquier
Fix unsafe coding around PG_TRY in RelationBuildRowSecurity: can't change
a variable inside PG_TRY and then use it in PG_CATCH without marking it
"volatile". In this case though it seems saner to avoid that by doing
a single assignment before entering the TRY block.
I started out just intending to fix that, but the more I looked at the
row-security code the more distressed I got. This patch also fixes
incorrect construction of the RowSecurityPolicy cache entries (there was
not sufficient care taken to copy pass-by-ref data into the cache memory
context) and a whole bunch of sloppiness around the definition and use of
pg_policy.polcmd. You can't use nulls in that column because initdb will
mark it NOT NULL --- and I see no particular reason why a null entry would
be a good idea anyway, so changing initdb's behavior is not the right
answer. The internal value of '\0' wouldn't be suitable in a "char" column
either, so after a bit of thought I settled on using '*' to represent ALL.
Chasing those changes down also revealed that somebody wasn't paying
attention to what the underlying values of ACL_UPDATE_CHR etc really were,
and there was a great deal of lackadaiscalness in the catalogs.sgml
documentation for pg_policy and pg_policies too.
This doesn't pretend to be a complete code review for the row-security
stuff, it just fixes the things that were in my face while dealing with
the bugs in RelationBuildRowSecurity.
This mode allows vacuumdb to open several server connections to vacuum
or analyze several tables simultaneously.
Author: Dilip Kumar. Some reworking by Álvaro Herrera
Reviewed by: Jeff Janes, Amit Kapila, Magnus Hagander, Andres Freund
At one point in the development of this feature, it was claimed that
allowing negative values would be useful to compensate for timezone
differences between master and slave servers. That was based on a mistaken
assumption that commit timestamps are recorded in local time; but of course
they're in UTC. Nor is a negative apply delay likely to be a sane way of
coping with server clock skew. However, the committed patch still treated
negative delays as doing something, and the timezone misapprehension
survived in the user documentation as well.
If recovery_min_apply_delay were a proper GUC we'd just set the minimum
allowed value to be zero; but for the moment it seems better to treat
negative settings as if they were zero.
In passing do some extra wordsmithing on the parameter's documentation,
including correcting a second misstatement that the parameter affects
processing of Restore Point records.
Issue noted by Michael Paquier, who also provided the code patch; doc
changes by me. Back-patch to 9.4 where the feature was introduced.
Use the phraseology "ISO 8601 week-numbering year" in place of just
"ISO year", and make related adjustments to other terminology.
The point of this change is that it seems some people see "ISO year"
and think "standard year", whereupon they're surprised when constructs
like to_char(..., "IYYY-MM-DD") produce nonsensical results. Perhaps
hanging a few more adjectives on it will discourage them from jumping
to false conclusions. I put in an explicit warning against that
specific usage, too, though the main point is to discourage people
who haven't read this far down the page.
In passing fix some nearby markup and terminology inconsistencies.
For simple boolean variables such as ON_ERROR_STOP, psql has for a long
time recognized variant spellings of "on" and "off" (such as "1"/"0"),
and it also made a point of warning you if you'd misspelled the setting.
But these conveniences did not exist for other keyword-valued variables.
In particular, though ECHO_HIDDEN and ON_ERROR_ROLLBACK include "on" and
"off" as possible values, none of the alternative spellings for those were
recognized; and to make matters worse the code would just silently assume
"on" was meant for any unrecognized spelling. Several people have reported
getting bitten by this, so let's fix it. In detail, this patch:
* Allows all spellings recognized by ParseVariableBool() for ECHO_HIDDEN
and ON_ERROR_ROLLBACK.
* Reports a warning for unrecognized values for COMP_KEYWORD_CASE, ECHO,
ECHO_HIDDEN, HISTCONTROL, ON_ERROR_ROLLBACK, and VERBOSITY.
* Recognizes all values for all these variables case-insensitively;
previously there was a mishmash of case-sensitive and case-insensitive
behaviors.
Back-patch to all supported branches. There is a small risk of breaking
existing scripts that were accidentally failing to malfunction; but the
consensus is that the chance of detecting real problems and preventing
future mistakes outweighs this.
These columns can be passed to pg_get_object_address() and used to
reconstruct the dropped objects identities in a remote server containing
similar objects, so that the drop can be replicated.
Reviewed by Stephen Frost, Heikki Linnakangas, Abhijit Menon-Sen, Andres
Freund.
This function returns object type and objname/objargs arrays, which can
be passed to pg_get_object_address. This is especially useful because
the textual representation can be copied to a remote server in order to
obtain the corresponding OID-based address. In essence, this function
is the inverse of recently added pg_get_object_address().
Catalog version bumped due to the addition of the new function.
Also add docs to pg_get_object_address.
Document the long forms of \H \i \ir \o \p \r \w ... apparently, we have
a long and dishonorable history of leaving out the unabbreviated names of
psql backslash commands.
Avoid saying "Unix shell"; we can just say "shell" with equal clarity,
and not leave Windows users wondering whether the feature works for them.
Improve consistency of documentation of \g \o \w metacommands. There's
no reason to use slightly different wording or markup for each one.
This reverts commit 1826987a46.
The overall design was deemed unacceptable, in discussion following the
previous commit message; we might find some parts of it still
salvageable, but I don't want to be on the hook for fixing it, so let's
wait until we have a new patch.
The previous representation using a boolean column for each attribute
would not scale as well as we want to add further attributes.
Extra auxilliary functions are added to go along with this change, to
make up for the lost convenience of access of the old representation.
Catalog version bumped due to change in catalogs and the new functions.
Author: Adam Brightwell, minor tweaks by Álvaro
Reviewed by: Stephen Frost, Andres Freund, Álvaro Herrera
Apart from enabling comments on domain constraints, this enables a
future project to replicate object dropping to remote servers: with the
current mechanism there's no way to distinguish between the two types of
constraints, so there's no way to know what to drop.
Also added support for the domain constraint comments in psql's \dd and
pg_dump.
Catalog version bumped due to the change in ObjectType enum.
This allows it to be used with ALTER ROLE SET.
Although the old setting of PGC_BACKEND prevented changes after session
start, after discussion it was more useful to allow ALTER ROLE SET
instead and just document that changes during a session have no effect.
This is similar to how session_preload_libraries works already.
An alternative would be to change things to allow PGC_BACKEND and
PGC_SU_BACKEND settings to be changed by ALTER ROLE SET. But that might
need further research (e.g., log_connections would probably not work).
based on patch by Kyotaro Horiguchi
json_agg was originally designed to aggregate records. However, it soon
became clear that it is useful for aggregating all kinds of values and
that's what we have on 9.3 and 9.4, and in head for it and jsonb_agg.
The documentation suggested otherwise, so this fixes it.
Explain that you have to use "VARIADIC ARRAY[]" to pass an empty array
to a variadic parameter position. This was already implicit in the text
but it seems better to spell it out.
Per a suggestion from David Johnston, though I didn't use his proposed
wording. Back-patch to all supported branches.
Add "normal" and "original" flags as output columns to the
pg_event_trigger_dropped_objects() function. With this it's possible to
distinguish which objects, among those listed, need to be explicitely
referenced when trying to replicate a deletion.
This is necessary so that the list of objects can be pruned to the
minimum necessary to replicate the DROP command in a remote server that
might have slightly different schema (for instance, TOAST tables and
constraints with different names and such.)
Catalog version bumped due to change of function definition.
Reviewed by: Abhijit Menon-Sen, Stephen Frost, Heikki Linnakangas,
Robert Haas.
The possibility that constant subexpressions of a CASE might be evaluated
at planning time was touched on in 9.17.1 (CASE expressions), but it really
ought to be explained in 4.2.14 (Expression Evaluation Rules) which is the
primary discussion of such topics. Add text and an example there, and
revise the <note> under CASE to link there.
Back-patch to all supported branches, since it's acted like this for a
long time (though 9.2+ is probably worse because of its more aggressive
use of constant-folding via replanning of nominally-prepared statements).
Pre-9.4, also back-patch text added in commit 0ce627d4 about CASE versus
aggregate functions.
Tom Lane and David Johnston, per discussion of bug #12273.
Author: Jim Nasby, some kibitzing by Heikki Linnankangas.
Discussion leading to current behavior and precise wording fueled by
thoughts from Robert Haas and Andres Freund.
Use SSPI authentication to allow connections exclusively from the OS
user that launched the test suite. This closes on Windows the
vulnerability that commit be76a6d39e
closed on other platforms. Users of "make installcheck" or custom test
harnesses can run "pg_regress --config-auth=DATADIR" to activate the
same authentication configuration that "make check" would use.
Back-patch to 9.0 (all supported versions).
Security: CVE-2014-0067
As with NOT NULL constraints, we consider that such constraints are merely
reports of constraints that are being enforced by the remote server (or
other underlying storage mechanism). Their only real use is to allow
planner optimizations, for example in constraint-exclusion checks. Thus,
the code changes here amount to little more than removal of the error that
was formerly thrown for applying CHECK to a foreign table.
(In passing, do a bit of cleanup of the ALTER FOREIGN TABLE reference page,
which had accumulated some weird decisions about ordering etc.)
Shigeru Hanada and Etsuro Fujita, reviewed by Kyotaro Horiguchi and
Ashutosh Bapat.
The ALTER SYSTEM ref page hadn't been held to a very high standard, nor
was the feature well integrated into section 18.1 (parameter setting).
Also, though commit 4c4654afe had improved the structure of 18.1, it also
introduced a lot of poor wording, imprecision, and outright falsehoods.
Try to clean that up.
Commit 815d71dee hadn't bothered to update the documentation to match the
behavioral change, and a lot of other text in this section was badly in
need of copy-editing.
The functions are:
to_jsonb()
jsonb_object()
jsonb_build_object()
jsonb_build_array()
jsonb_agg()
jsonb_object_agg()
Also along the way some better logic is implemented in
json_categorize_type() to match that in the newly implemented
jsonb_categorize_type().
Andrew Dunstan, reviewed by Pavel Stehule and Alvaro Herrera.
The functions remove object fields, including in nested objects, that
have null as a value. In certain cases this can lead to considerably
smaller datums, with no loss of semantic information.
Andrew Dunstan, reviewed by Pavel Stehule.
Generate a table_rewrite event when ALTER TABLE
attempts to rewrite a table. Provide helper
functions to identify table and reason.
Intended use case is to help assess or to react
to schema changes that might hold exclusive locks
for long periods.
Dimitri Fontaine, triggering an edit by Simon Riggs
Reviewed in detail by Michael Paquier
Transactions can now set their commit timestamp directly as they commit,
or an external transaction commit timestamp can be fed from an outside
system using the new function TransactionTreeSetCommitTsData(). This
data is crash-safe, and truncated at Xid freeze point, same as pg_clog.
This module is disabled by default because it causes a performance hit,
but can be enabled in postgresql.conf requiring only a server restart.
A new test in src/test/modules is included.
Catalog version bumped due to the new subdirectory within PGDATA and a
couple of new SQL functions.
Authors: Álvaro Herrera and Petr Jelínek
Reviewed to varying degrees by Michael Paquier, Andres Freund, Robert
Haas, Amit Kapila, Fujii Masao, Jaime Casanova, Simon Riggs, Steven
Singer, Peter Eisentraut
This is advance preparation for introducing even more test modules; the
easy solution is to add them to contrib, but that's bloated enough that
it seems a good time to think of something different.
Moved modules are dummy_seclabel, test_shm_mq, test_parser and
worker_spi.
(test_decoding was also a candidate, but there was too much opposition
to moving that one. We can always reconsider later.)
This reverts commit 9f80f4835a. The
function returned the raw value of a connection parameter, a task served
by PQconninfo(). The next commit will reimplement the psql \conninfo
change that way. Back-patch to 9.4, where that commit first appeared.
As pointed out by Robert, we should really have named pg_rowsecurity
pg_policy, as the objects stored in that catalog are policies. This
patch fixes that and updates the column names to start with 'pol' to
match the new catalog name.
The security consideration for COPY with row level security, also
pointed out by Robert, has also been addressed by remembering and
re-checking the OID of the relation initially referenced during COPY
processing, to make sure it hasn't changed under us by the time we
finish planning out the query which has been built.
Robert and Alvaro also commented on missing OCLASS and OBJECT entries
for POLICY (formerly ROWSECURITY or POLICY, depending) in various
places. This patch fixes that too, which also happens to add the
ability to COMMENT on policies.
In passing, attempt to improve the consistency of messages, comments,
and documentation as well. This removes various incarnations of
'row-security', 'row-level security', 'Row-security', etc, in favor
of 'policy', 'row level security' or 'row_security' as appropriate.
Happy Thanksgiving!
These cases formerly failed with errors about "could not find array type
for data type". Now they yield arrays of the same element type and one
higher dimension.
The implementation involves creating functions with API similar to the
existing accumArrayResult() family. I (tgl) also extended the base family
by adding an initArrayResult() function, which allows callers to avoid
special-casing the zero-inputs case if they just want an empty array as
result. (Not all do, so the previous calling convention remains valid.)
This allowed simplifying some existing code in xml.c and plperl.c.
Ali Akbar, reviewed by Pavel Stehule, significantly modified by me
If the "dbname" attribute in PQconnectDBParams contained a connection string
or URI (and expand_dbname = TRUE), the database name from the connection
string could not be overridden by a subsequent "dbname" keyword in the
array. That was not intentional; all other options can be overridden.
Furthermore, any subsequent "dbname" caused the connection string from the
first dbname value to be processed again, overriding any values for the same
options that were given between the connection string and the second dbname
option.
In the passing, clarify in the docs that only the first dbname option in the
array is parsed as a connection string.
Alex Shulgin. Backpatch to all supported versions.
In bug #12000, Andreas Kunert complained that the documentation was
misleading in saying "FROM T1 CROSS JOIN T2 is equivalent to FROM T1, T2".
That's correct as far as it goes, but the equivalence doesn't hold when
you consider three or more tables, since JOIN binds more tightly than
comma. I added a <note> to explain this, and ended up rearranging some
of the existing text so that the note would make sense in context.
In passing, rewrite the description of JOIN USING, which was unnecessarily
vague, and hadn't been helped any by somebody's reliance on markup as a
substitute for clear writing. (Mostly this involved reintroducing a
concrete example that was unaccountably removed by commit 032f3b7e166cfa28.)
Back-patch to all supported branches.
Allows pg_dump to use a snapshot previously defined by a concurrent
session that has either used pg_export_snapshot() or obtained a
snapshot when creating a logical slot. When this option is used with
parallel pg_dump, the snapshot defined by this option is used and no
new snapshot is taken.
Simon Riggs and Michael Paquier
Previously pg_receivexlog flushed WAL data only when WAL file was switched.
Then 3dad73e added -F option to pg_receivexlog so that users could control
how frequently sync commands were issued to WAL files. It also allowed users
to make pg_receivexlog flush WAL data immediately after writing by
specifying 0 in -F option. However feedback messages were not sent back
immediately even after a flush location was updated. So even if WAL data
was flushed in real time, the server could not see that for a while.
This commit removes -F option from and adds --synchronous to pg_receivexlog.
If --synchronous is specified, like the standby's wal receiver, pg_receivexlog
flushes WAL data as soon as there is WAL data which has not been flushed yet.
Then it sends back the feedback message identifying the latest flush location
to the server. This option is useful to make pg_receivexlog behave as sync
standby by using replication slot, for example.
Original patch by Furuya Osamu, heavily rewritten by me.
Reviewed by Heikki Linnakangas, Alvaro Herrera and Sawada Masahiko.
The SELECT reference page didn't really address the question of when
aggregate function evaluation occurs, nor did the "expression evaluation
rules" documentation mention that CASE can't be used to control whether
an aggregate gets evaluated or not. Improve that.
Per discussion of bug #11661. Original text by Marti Raudsepp and Michael
Paquier, rewritten significantly by me.
When ALTER TABLESPACE MOVE ALL was changed to be ALTER TABLE ALL IN
TABLESPACE, the ALTER TABLESPACE summary should have been adjusted back
to its original definition.
Patch by Thom Brown (thanks!).
Previously the maximum size of GIN pending list was controlled only by
work_mem. But the reasonable value of work_mem and the reasonable size
of the list are basically not the same, so it was not appropriate to
control both of them by only one GUC, i.e., work_mem. This commit
separates new GUC, pending_list_cleanup_size, from work_mem to allow
users to control only the size of the list.
Also this commit adds pending_list_cleanup_size as new storage parameter
to allow users to specify the size of the list per index. This is useful,
for example, when users want to increase the size of the list only for
the GIN index which can be updated heavily, and decrease it otherwise.
Reviewed by Etsuro Fujita.
Besides a couple of typo fixes, per David Rowley, Thom Brown, and Amit
Langote, and mentions of BRIN in the general CREATE INDEX page again per
David, this includes silencing MSVC compiler warnings (thanks Microsoft)
and an additional variable initialization per Coverity scanner.
BRIN is a new index access method intended to accelerate scans of very
large tables, without the maintenance overhead of btrees or other
traditional indexes. They work by maintaining "summary" data about
block ranges. Bitmap index scans work by reading each summary tuple and
comparing them with the query quals; all pages in the range are returned
in a lossy TID bitmap if the quals are consistent with the values in the
summary tuple, otherwise not. Normal index scans are not supported
because these indexes do not store TIDs.
As new tuples are added into the index, the summary information is
updated (if the block range in which the tuple is added is already
summarized) or not; in the latter case, a subsequent pass of VACUUM or
the brin_summarize_new_values() function will create the summary
information.
For data types with natural 1-D sort orders, the summary info consists
of the maximum and the minimum values of each indexed column within each
page range. This type of operator class we call "Minmax", and we
supply a bunch of them for most data types with B-tree opclasses.
Since the BRIN code is generalized, other approaches are possible for
things such as arrays, geometric types, ranges, etc; even for things
such as enum types we could do something different than minmax with
better results. In this commit I only include minmax.
Catalog version bumped due to new builtin catalog entries.
There's more that could be done here, but this is a good step forwards.
Loosely based on ideas from Simon Riggs; code mostly by Álvaro Herrera,
with contribution by Heikki Linnakangas.
Patch reviewed by: Amit Kapila, Heikki Linnakangas, Robert Haas.
Testing help from Jeff Janes, Erik Rijkers, Emanuel Calvo.
PS:
The research leading to these results has received funding from the
European Union's Seventh Framework Programme (FP7/2007-2013) under
grant agreement n° 318633.
xlog.c is huge, this makes it a little bit smaller, which is nice. Functions
related to putting together the WAL record are in xloginsert.c, and the
lower level stuff for managing WAL buffers and such are in xlog.c.
Also move the definition of XLogRecord to a separate header file. This
causes churn in the #includes of all the files that write WAL records, and
redo routines, but it avoids pulling in xlog.h into most places.
Reviewed by Michael Paquier, Alvaro Herrera, Andres Freund and Amit Kapila.
Long ago we briefly had an "autocommit" GUC that turned server-side
autocommit on and off. That behavior was removed in 7.4 after concluding
that it broke far too much client-side logic, and making clients cope with
both behaviors was impractical. But the GUC variable was left behind, so
as not to break any client code that might be trying to read its value.
Enough time has now passed that we should remove the GUC completely.
Whatever vestigial backwards-compatibility benefit it had is outweighed by
the risk of confusion for newbies who assume it ought to do something,
as per a recent complaint from Wolfgang Wilhelm.
In passing, adjust what seemed to me a rather confusing documentation
reference to libpq's autocommit behavior. libpq as such knows nothing
about autocommit, so psql is probably what was meant.
pgp_sym_encrypt's option is spelled "sess-key", not "enable-session-key".
Spotted by Jeff Janes.
In passing, improve a comment in pgp-pgsql.c to make it clearer that
the debugging options are intentionally undocumented.
Building the documentation with XSLT does not check the DTD, like a
DSSSL build would. One can often get away with having invalid XML, but
the stylesheets might then create incorrect output, as they are not
designed to handle that. Therefore, check the validity of the XML
against the DTD, using xmllint, during the build.
Add xmllint detection to configure, and add some documentation.
xmllint comes with libxml2, which is already in use, but it might be in
a separate package, such as libxml2-utils on Debian.
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
The old text was written in ancient times when RPM packages could be
shared more or less freely across a plethora of RPM-based Linux
distributions. This isn't really the case anymore, so just make this
information more concrete for the Red Hat family.
This needed a general cleanup of wording, typos, outdated terminology,
formatting, and hard-to-understand and borderline incorrect information.
Also tweak the pg_receivexlog page a bit to make the two more
consistent.
Up to now, PG has assumed that any given timezone abbreviation (such as
"EDT") represents a constant GMT offset in the usage of any particular
region; we had a way to configure what that offset was, but not for it
to be changeable over time. But, as with most things horological, this
view of the world is too simplistic: there are numerous regions that have
at one time or another switched to a different GMT offset but kept using
the same timezone abbreviation. Almost the entire Russian Federation did
that a few years ago, and later this month they're going to do it again.
And there are similar examples all over the world.
To cope with this, invent the notion of a "dynamic timezone abbreviation",
which is one that is referenced to a particular underlying timezone
(as defined in the IANA timezone database) and means whatever it currently
means in that zone. For zones that use or have used daylight-savings time,
the standard and DST abbreviations continue to have the property that you
can specify standard or DST time and get that time offset whether or not
DST was theoretically in effect at the time. However, the abbreviations
mean what they meant at the time in question (or most recently before that
time) rather than being absolutely fixed.
The standard abbreviation-list files have been changed to use this behavior
for abbreviations that have actually varied in meaning since 1970. The
old simple-numeric definitions are kept for abbreviations that have not
changed, since they are a bit faster to resolve.
While this is clearly a new feature, it seems necessary to back-patch it
into all active branches, because otherwise use of Russian zone
abbreviations is going to become even more problematic than it already was.
This change supersedes the changes in commit 513d06ded et al to modify the
fixed meanings of the Russian abbreviations; since we've not shipped that
yet, this will avoid an undesirably incompatible (not to mention incorrect)
change in behavior for timestamps between 2011 and 2014.
This patch makes some cosmetic changes in ecpglib to keep its usage of
datetime lookup tables as similar as possible to the backend code, but
doesn't do anything about the increasingly obsolete set of timezone
abbreviation definitions that are hard-wired into ecpglib. Whatever we
do about that will likely not be appropriate material for back-patching.
Also, a potential free() of a garbage pointer after an out-of-memory
failure in ecpglib has been fixed.
This patch also fixes pre-existing bugs in DetermineTimeZoneOffset() that
caused it to produce unexpected results near a timezone transition, if
both the "before" and "after" states are marked as standard time. We'd
only ever thought about or tested transitions between standard and DST
time, but that's not what's happening when a zone simply redefines their
base GMT offset.
In passing, update the SGML documentation to refer to the Olson/zoneinfo/
zic timezone database as the "IANA" database, since it's now being
maintained under the auspices of IANA.
We've gotten enough push-back on that change to make it clear that it
wasn't an especially good idea to do it like that. Revert plain EXPLAIN
to its previous behavior, but keep the extra output in EXPLAIN ANALYZE.
Per discussion.
Internally, I set this up as a separate flag ExplainState.summary that
controls printing of planning time and execution time. For now it's
just copied from the ANALYZE option, but we could consider exposing it
to users.
The way the ALTER VIEW / SET options were listed in the synopsis was
very confusing. Move the list to the main description, similar to how
the ALTER TABLE reference page does it.
This allows transactions that take longer than specified limit to be counted
separately. With --rate, transactions that are already late by the time we
get to execute them are skipped altogether. Using --latency-limit with
--rate allows you to "catch up" more quickly, if there's a hickup in the
server causing a lot of transactions to stall momentarily.
Fabien COELHO, reviewed by Rukh Meski and heavily refactored by me.
This clause changes the behavior of SELECT locking clauses in the
presence of locked rows: instead of causing a process to block waiting
for the locks held by other processes (or raise an error, with NOWAIT),
SKIP LOCKED makes the new reader skip over such rows. While this is not
appropriate behavior for general purposes, there are some cases in which
it is useful, such as queue-like tables.
Catalog version bumped because this patch changes the representation of
stored rules.
Reviewed by Craig Ringer (based on a previous attempt at an
implementation by Simon Riggs, who also provided input on the syntax
used in the current patch), David Rowley, and Álvaro Herrera.
Author: Thomas Munro
pg_receivexlog already has the capability to use a replication slot to
reserve WAL on the upstream node. But the used slot currently has to
be created via SQL.
To allow using slots directly, without involving SQL, add
--create-slot and --drop-slot actions, analogous to the logical slot
manipulation support in pg_recvlogical.
Author: Michael Paquier
Discussion: CABUevEx+zrOHZOQg+dPapNPFRJdsk59b=TSVf30Z71GnFXhQaw@mail.gmail.com
A future patch (9.5 only) adds slot management to pg_receivexlog. The
verbs create/drop don't seem descriptive enough there. It seems better
to rename pg_recvlogical's commands now, in beta, than live with the
inconsistency forever.
The old form (e.g. --drop) will still be accepted by virtue of most
getopt_long() options accepting abbreviations for long commands.
Backpatch to 9.4 where pg_recvlogical was introduced.
Author: Michael Paquier and Andres Freund
Discussion: CAB7nPqQtt79U6FmhwvgqJmNyWcVCbbV-nS72j_jyPEopERg9rg@mail.gmail.com
Add entries for recent changes, including noting the JSONB format change
and the recent timezone data changes. We should remove those two items
before 9.4 final: the JSONB change will be of no interest in the long
run, and it's not normally our habit to mention timezone updates in
major-release notes. But it seems important to document them temporarily
for beta testers.
I failed to resist the temptation to wordsmith a couple of existing
entries, too.
Peter G pointed out that valgrind was, rightfully, complaining about
CreatePolicy() ending up copying beyond the end of the parsed policy
name. Name is a fixed-size type and we need to use namein (through
DirectFunctionCall1()) to flush out the entire array before we pass
it down to heap_form_tuple.
Michael Paquier pointed out that pg_dump --verbose was missing a
newline and Fabrízio de Royes Mello further pointed out that the
schema was also missing from the messages, so fix those also.
Also, based on an off-list comment from Kevin, rework the psql \d
output to facilitate copy/pasting into a new CREATE or ALTER POLICY
command.
Lastly, improve the pg_policies view and update the documentation for
it, along with a few other minor doc corrections based on an off-list
discussion with Adam Brightwell.
When there are cost-delay-related storage options set for a table,
trying to make that table participate in the autovacuum cost-limit
balancing algorithm produces undesirable results: instead of using the
configured values, the global values are always used,
as illustrated by Mark Kirkwood in
http://www.postgresql.org/message-id/52FACF15.8020507@catalyst.net.nz
Since the mechanism is already complicated, just disable it for those
cases rather than trying to make it cope. There are undesirable
side-effects from this too, namely that the total I/O impact on the
system will be higher whenever such tables are vacuumed. However, this
is seen as less harmful than slowing down vacuum, because that would
cause bloat to accumulate. Anyway, in the new system it is possible to
tweak options to get the precise behavior one wants, whereas with the
previous system one was simply hosed.
This has been broken forever, so backpatch to all supported branches.
This might affect systems where cost_limit and cost_delay have been set
for individual tables.
This add a new pgp_armor_headers function to extract armor headers from an
ASCII-armored blob, and a new overloaded variant of the armor function, for
constructing an ASCII-armor with extra headers.
Marko Tiikkaja and me.
The COPY documentation incorrectly stated, for the PROGRAM case,
that we read from stdin and wrote to stdout. Fix that, and improve
consistency by referring to the 'PostgreSQL' user instead of the
'postgres' user, as is done in the rest of the COPY documentation.
Pointed out by Peter van Dijk.
Back-patch to 9.3 where COPY .. PROGRAM was introduced.
Per discussion, revert the commit which added 'ignore_nulls' to
row_to_json. This capability would be better added as an independent
function rather than being bolted on to row_to_json. Additionally,
the implementation didn't address complex JSON objects, and so was
incomplete anyway.
Pointed out by Tom and discussed with Andrew and Robert.
Andres pointed out that there was an extra ';' in equalPolicies, which
made me realize that my prior testing with CLOBBER_CACHE_ALWAYS was
insufficient (it didn't always catch the issue, just most of the time).
Thanks to that, a different issue was discovered, specifically in
equalRSDescs. This change corrects eqaulRSDescs to return 'true' once
all policies have been confirmed logically identical. After stepping
through both functions to ensure correct behavior, I ran this for
about 12 hours of CLOBBER_CACHE_ALWAYS runs of the regression tests
with no failures.
In addition, correct a few typos in the documentation which were pointed
out by Thom Brown (thanks!) and improve the policy documentation further
by adding a flushed out usage example based on a unix passwd file.
Lastly, clean up a few comments in the regression tests and pg_dump.h.
It was confusing that to other commands, like initdb and postgres, you would
pass the data directory with "-D datadir", but pg_controldata and
pg_resetxlog would take just plain path, without the "-D". With this patch,
pg_controldata and pg_resetxlog also accept "-D datadir".
Abhijit Menon-Sen, with minor kibitzing by me
Address a few typos in the row security update, pointed out
off-list by Adam Brightwell. Also include 'ALL' in the list
of commands supported, for completeness.
Buildfarm member tick identified an issue where the policies in the
relcache for a relation were were being replaced underneath a running
query, leading to segfaults while processing the policies to be added
to a query. Similar to how TupleDesc RuleLocks are handled, add in a
equalRSDesc() function to check if the policies have actually changed
and, if not, swap back the rsdesc field (using the original instead of
the temporairly built one; the whole structure is swapped and then
specific fields swapped back). This now passes a CLOBBER_CACHE_ALWAYS
for me and should resolve the buildfarm error.
In addition to addressing this, add a new chapter in Data Definition
under Privileges which explains row security and provides examples of
its usage, change \d to always list policies (even if row security is
disabled- but note that it is disabled, or enabled with no policies),
rework check_role_for_policy (it really didn't need the entire policy,
but it did need to be using has_privs_of_role()), and change the field
in pg_class to relrowsecurity from relhasrowsecurity, based on
Heikki's suggestion. Also from Heikki, only issue SET ROW_SECURITY in
pg_restore when talking to a 9.5+ server, list Bypass RLS in \du, and
document --enable-row-security options for pg_dump and pg_restore.
Lastly, fix a number of minor whitespace and typo issues from Heikki,
Dimitri, add a missing #include, per Peter E, fix a few minor
variable-assigned-but-not-used and resource leak issues from Coverity
and add tab completion for role attribute bypassrls as well.
This has been broken since commit af7914c662,
which added the EXPLAIN (TIMING) option. Although that commit included
updates to auto_explain, they evidently weren't tested very carefully,
because the code failed to print node timings even when it should, due to
failure to set es.timing in the ExplainState struct. Reported off-list by
Neelakanth Nadgir of Salesforce.
In passing, clean up the documentation for auto_explain's options a
little bit, including re-ordering them into what seems to me a more
logical order.
Building on the updatable security-barrier views work, add the
ability to define policies on tables to limit the set of rows
which are returned from a query and which are allowed to be added
to a table. Expressions defined by the policy for filtering are
added to the security barrier quals of the query, while expressions
defined to check records being added to a table are added to the
with-check options of the query.
New top-level commands are CREATE/ALTER/DROP POLICY and are
controlled by the table owner. Row Security is able to be enabled
and disabled by the owner on a per-table basis using
ALTER TABLE .. ENABLE/DISABLE ROW SECURITY.
Per discussion, ROW SECURITY is disabled on tables by default and
must be enabled for policies on the table to be used. If no
policies exist on a table with ROW SECURITY enabled, a default-deny
policy is used and no records will be visible.
By default, row security is applied at all times except for the
table owner and the superuser. A new GUC, row_security, is added
which can be set to ON, OFF, or FORCE. When set to FORCE, row
security will be applied even for the table owner and superusers.
When set to OFF, row security will be disabled when allowed and an
error will be thrown if the user does not have rights to bypass row
security.
Per discussion, pg_dump sets row_security = OFF by default to ensure
that exports and backups will have all data in the table or will
error if there are insufficient privileges to bypass row security.
A new option has been added to pg_dump, --enable-row-security, to
ask pg_dump to export with row security enabled.
A new role capability, BYPASSRLS, which can only be set by the
superuser, is added to allow other users to be able to bypass row
security using row_security = OFF.
Many thanks to the various individuals who have helped with the
design, particularly Robert Haas for his feedback.
Authors include Craig Ringer, KaiGai Kohei, Adam Brightwell, Dean
Rasheed, with additional changes and rework by me.
Reviewers have included all of the above, Greg Smith,
Jeff McCormick, and Robert Haas.
The new --stats/--stats=record options to pg_xlogdump display per
rmgr/per record statistics about the parsed WAL. This is useful to
understand what the WAL primarily consists of, to allow targeted
optimizations on application, configuration, and core code level.
It is likely that we will want to fine tune the statistics further,
but the feature already is quite helpful.
Author: Abhijit Menon-Sen, slightly editorialized by me
Reviewed-By: Andres Freund, Dilip Kumar and Furuya Osamu
Discussion: 20140604104716.GA3989@toroid.org
They were marked to return a boolean, but they actually return a
GinTernaryValue, which is more like a "char". It makes no practical
difference, as the triConsistent functions cannot be called directly from
SQL because they have "internal" arguments, but this nevertheless seems
more correct.
Also fix the GinTernaryValue name in the documentation. I renamed the enum
earlier, but neglected the docs.
Alexander Korotkov. This is new in 9.4, so backpatch there.
This new GUC context option allows GUC parameters to have the combined
properties of PGC_BACKEND and PGC_SUSET, ie, they don't change after
session start and non-superusers can't change them. This is a more
appropriate choice for log_connections and log_disconnections than their
previous context of PGC_BACKEND, because we don't want non-superusers
to be able to affect whether their sessions get logged.
Note: the behavior for log_connections is still a bit odd, in that when
a superuser attempts to set it from PGOPTIONS, the setting takes effect
but it's too late to enable or suppress connection startup logging.
It's debatable whether that's worth fixing, and in any case there is
a reasonable argument for PGC_SU_BACKEND to exist.
In passing, re-pgindent the files touched by this commit.
Fujii Masao, reviewed by Joe Conway and Amit Kapila
Instead of just erroring out when a tool is missing, wrap the call with
the "missing" script that we are already using for bison, flex, and
perl, so that the users get a useful error message.
Previously replication commands like IDENTIFY_COMMAND were not logged
even when log_statements is set to all. Some users who want to audit
all types of statements were not satisfied with this situation. To
address the problem, this commit adds new GUC log_replication_commands.
If it's enabled, all replication commands are logged in the server log.
There are many ways to allow us to enable that logging. For example,
we can extend log_statement so that replication commands are logged
when it's set to all. But per discussion in the community, we reached
the consensus to add separate GUC for that.
Reviewed by Ian Barwick, Robert Haas and Heikki Linnakangas.
With the unicode linestyle, this adds support to control if the
column, header, or border style should be single or double line
unicode characters. The default remains 'single'.
In passing, clean up the border documentation and address some
minor formatting/spelling issues.
Pavel Stehule, with some additional changes by me.
Provide an option to skip NULL values in a row when generating a JSON
object from that row with row_to_json. This can reduce the size of the
JSON object in cases where columns are NULL without really reducing the
information in the JSON object.
This also makes row_to_json into a single function with default values,
rather than having multiple functions. In passing, change array_to_json
to also be a single function with default values (we don't add an
'ignore_nulls' option yet- it's not clear that there is a sensible
use-case there, and it hasn't been asked for in any case).
Pavel Stehule
The reported latency values now include the "schedule lag" time, that is,
the time between the transaction's scheduled start time and the time it
actually started. This relates better to a model where requests arrive at a
certain rate, and we are interested in the response time to the end user or
application, rather than the response time of the database itself.
Also, when --rate is used, include the schedule lag time in the log output.
The --rate option is new in 9.4, so backpatch to 9.4. It seems better to
make this change in 9.4, while we're still in the beta period, than ship a
9.4 version that calculates the values differently than 9.5.
Add --help=<topic> for the commandline, and \? <topic> as a backslash
command, to show more help than the invocations without parameters
do. "commands", "variables" and "options" currently exist as help
topics describing, respectively, backslash commands, psql variables,
and commandline switches. Without parameters the help commands show
their previous topic.
Some further wordsmithing or extending of the added help content might
be needed; but there seems little benefit delaying the overall feature
further.
Author: Pavel Stehule, editorialized by many
Reviewed-By: Andres Freund, Petr Jelinek, Fujii Masao, MauMau, Abhijit
Menon-Sen and Erik Rijkers.
Discussion: CAFj8pRDVGuC-nXBfe2CK8vpyzd2Dsr9GVpbrATAnZO=2YQ0s2Q@mail.gmail.com,
CAFj8pRA54AbTv2RXDTRxiAd8hy8wxmoVLqhJDRCwEnhdd7OUkw@mail.gmail.com
This provides a convenient method of classifying input values into buckets
that are not necessarily equal-width. It works on any sortable data type.
The choice of function name is a bit debatable, perhaps, but showing that
there's a relationship to the SQL standard's width_bucket() function seems
more attractive than the other proposals.
Petr Jelinek, reviewed by Pavel Stehule
psql's \s (print command history) doesn't work at all with recent libedit
versions when printing to the terminal, because libedit tries to do an
fchmod() on the target file which will fail if the target is /dev/tty.
(We'd already noted this in the context of the target being /dev/null.)
Even before that, it didn't work pleasantly, because libedit likes to
encode the command history file (to ensure successful reloading), which
renders it nigh unreadable, not to mention significantly different-looking
depending on exactly which libedit version you have. So let's forget using
write_history() for this purpose, and instead print the data ourselves,
using logic similar to that used to iterate over the history for newline
encoding/decoding purposes.
While we're at it, insert the ability to use the pager when \s is printing
to the terminal. This has been an acknowledged shortcoming of \s for many
years, so while you could argue it's not exactly a back-patchable bug fix
it still seems like a good improvement. Anyone who's seriously annoyed
at this can use "\s /dev/tty" or local equivalent to get the old behavior.
Experimentation with this showed that the history iteration logic was
actually rather broken when used with libedit. It turns out that with
libedit you have to use previous_history() not next_history() to advance
to more recent history entries. The easiest and most robust fix for this
seems to be to make a run-time test to verify which function to call.
We had not noticed this because libedit doesn't really need the newline
encoding logic: its own encoding ensures that command entries containing
newlines are reloaded correctly (unlike libreadline). So the effective
behavior with recent libedits was that only the oldest history entry got
newline-encoded or newline-decoded. However, because of yet other bugs in
history_set_pos(), some old versions of libedit allowed the existing loop
logic to reach entries besides the oldest, which means there may be libedit
~/.psql_history files out there containing encoded newlines in more than
just the oldest entry. To ensure we can reload such files, it seems
appropriate to back-patch this fix, even though that will result in some
incompatibility with older psql versions (ie, multiline history entries
written by a psql with this fix will look corrupted to a psql without it,
if its libedit is reasonably up to date).
Stepan Rutz and Tom Lane
The old claim is from my commit d06ebdb8d3 of
2000-07-17, but it seems to have been a plain old thinko; sum(float4) has
been distinct from sum(float8) since Berkeley days. Noted by KaiGai Kohei.
While at it, mention the existence of sum(money), which is also of
embarrassingly ancient vintage.
The link to the NIST web page about DES standards leads to nowhere, and
according to archive.org has been forwarded to an unrelated page for
many years. Therefore, just remove that link. More up to date
information can be found via Wikipedia, for example.
The number of % parameter markers in RAISE statement should match the number
of parameters given. We used to check that at execution time, but we have
all the information needed at compile time, so let's check it at compile
time instead. It's generally better to find mistakes earlier.
Marko Tiikkaja, reviewed by Fabien Coelho
The new %l substitution shows the line number inside a (potentially
multi-line) statement starting from one.
Author: Sawada Masahiko, heavily editorialized by me.
Reviewed-By: Jeevan Chalke, Alvaro Herrera
This patch allows us to execute ALTER SYSTEM RESET command to
remove the configuration entry from postgresql.auto.conf.
Vik Fearing, reviewed by Amit Kapila and me.
Errors detected using Topy (https://github.com/intgr/topy), all
changes verified by hand and some manual tweaks added.
Marti Raudsepp
Individual changes backpatched, where applicable, as far as 9.0.
This is useful to allow to set GUCs to values that include spaces;
something that wasn't previously possible. The primary case motivating
this is the desire to set default_transaction_isolation to 'repeatable
read' on a per connection basis, but other usecases like seach_path do
also exist.
This introduces a slight backward incompatibility: Previously a \ in
an option value would have been passed on literally, now it'll be
taken as an escape.
The relevant mailing list discussion starts with
20140204125823.GJ12016@awork2.anarazel.de.
This enables changing permanent (logged) tables to unlogged and
vice-versa.
(Docs for ALTER TABLE / SET TABLESPACE got shuffled in an order that
hopefully makes more sense than the original.)
Author: Fabrízio de Royes Mello
Reviewed by: Christoph Berg, Andres Freund, Thom Brown
Some tweaking by Álvaro Herrera
Cause the path extraction operators to return their lefthand input,
not NULL, if the path array has no elements. This seems more consistent
since the case ought to correspond to applying the simple extraction
operator (->) zero times.
Cause other corner cases in field/element/path extraction to return NULL
rather than failing. This behavior is arguably more useful than throwing
an error, since it allows an expression index using these operators to be
built even when not all values in the column are suitable for the
extraction being indexed. Moreover, we already had multiple
inconsistencies between the path extraction operators and the simple
extraction operators, as well as inconsistencies between the JSON and
JSONB code paths. Adopt a uniform rule of returning NULL rather than
throwing an error when the JSON input does not have a structure that
permits the request to be satisfied.
Back-patch to 9.4. Update the release notes to list this as a behavior
change since 9.3.
As 'ALTER TABLESPACE .. MOVE ALL' really didn't change the tablespace
but instead changed objects inside tablespaces, it made sense to
rework the syntax and supporting functions to operate under the
'ALTER (TABLE|INDEX|MATERIALIZED VIEW)' syntax and to be in
tablecmds.c.
Pointed out by Alvaro, who also suggested the new syntax.
Back-patch to 9.4.
The new column shows how many backends have a buffer pinned. That can
be useful during development or to diagnose production issues
e.g. caused by vacuum waiting for cleanup locks.
To handle upgrades transparently - the extension might be used in
views - deal with callers expecting the old number of columns.
Reviewed by Fujii Masao and Rajeev rastogi.
While the space is optional, it seems nicer to be consistent with what
you get if you do "SET search_path=...". SET always normalizes the
separator to be comma+space.
Christoph Martin
The aboriginal sample placed connection parameters in
groupOfUniqueNames/uniqueMember. OpenLDAP, at least as early as version
2.4.23, rejects uniqueMember entries that do not conform to the syntax
for a distinguished name. Use device/description, which is free-form.
Back-patch to 9.4 for web site visibility.
Oversight in commit 7cbe57c34d.
Back-patch to 9.4, where that commit first appeared. In passing,
release-note the FDW API postcondition change from the same commit.
The old text explained what happened if we didn't have working int64
arithmetic. Since that case has been explicitly rejected by configure
since 8.4.3, documenting it in the 9.x branches can only produce confusion.
Commit f30015b6d7 made this happen for
timestamp and timestamptz, but it seems pretty inconsistent to not
do it for simple dates as well.
(In passing, I re-pgindent'd json.c.)
Previously only CREATE_REPLICATION_SLOT was exposed as an index term.
That's odd and there is no reason not to add index terms for other
replication commands.
Back-patch to 9.4.
Update the notes to include commits through today, and do a lot of
wordsmithing and markup adjustment. Notably, don't use <link> where <xref>
will do; since we got rid of the text-format HISTORY file, there is no
longer a reason to avoid <xref>.
The new DISCARD SEQUENCES option was inadequately described, and hadn't
been mentioned at all in the initial Description paragraph. Rather than
rectifying the latter the hard way, it seemed better to rewrite the
description as a summary, instead of having it basically duplicate
statements made under Parameters. Be more consistent about the ordering
of the options, too.
The upstream stylesheets for man output insert a *roff comment for an
occurrence of an indexterm, for reasons that have apparently been lost
in history. This, however, is done incorrectly and causes some
formatting problems. This hasn't been an issue until now, but the
reorganization of indexterm elements inside variablelists has triggered
this issue.
The upstream fix (http://sourceforge.net/p/docbook/bugs/1340/) is to
drop indexterms altogether in man output, and so we'll do the same here.
FreeBSD hasn't made any use of kern.ipc.semmap since 1.1, and newer
releases reject attempts to set it altogether; so stop recommending
that it be adjusted. Per bug #11161.
Back-patch to all supported branches. Before 9.3, also incorporate
commit 7a42dff47, which touches the same text and for some reason
was not back-patched at the time.
This option is equivalent to --slot option which pg_receivexlog has
already supported, which specifies the replication slot to use for
WAL streaming. pg_recvlogical has already supported both options,
and this commit makes pg_receivexlog consistent with pg_recvlogical
regarding the slot option.
Back-patch to 9.4 where the slot option was added.
Michael Paquier
This commit also changes tab-completion for \set so that it displays
all the special variables like COMP_KEYWORD_CASE. Previously it displayed
only variables having the set values. Which was not user-friendly for
those who want to set the unset variables.
This commit also changes tab-completion for :variable so that only the
variables having the set values are displayed. Previously even unset
variables were displayed.
Pavel Stehule, modified by me.
The initialization fork was added in 9.1, but has not been taken into
consideration in documents of get_raw_page function in pageinspect and
storage layout. This commit fixes those oversights.
get_raw_page can read not only a table but also an index, etc. So it
should be documented that the function can read any relation. This commit
also fixes the document of pageinspect that way.
Back-patch to 9.1 where those oversights existed.
Vik Fearing, review by MauMau
The user documentation was vague and not entirely accurate about how
we treat domain inputs for ambiguous operators/functions. Clarify
that, and add an example and some commentary. Per a recent question
from Adam Mackler.
It's acted like this ever since we added domains, so back-patch
to all supported branches.
Fix an obvious typo in json_build_object()'s complaint about invalid
number of arguments, and make the errhint a bit more sensible too.
Per discussion about how to word the improved hint, change the few places
in the documentation that refer to JSON object field names as "names" to
say "keys" instead, since that's what we've said in the vast majority of
places in the docs. Arguably "name" is more correct, since that's the
terminology used in RFC 7159; but we're stuck with "key" in view of the
naming of json_object_keys() so let's at least be self-consistent.
I adjusted a few code comments to match this as well, and failed to
resist the temptation to clean up some odd whitespace choices in the
same area, as well as a useless duplicate PG_ARGISNULL() check. There's
still quite a bit of code that uses the phrase "field name" in non-user-
visible ways, so I left those usages alone.
This allows us to specify the maximum time to issue fsync to ensure
the received WAL file is safely flushed to disk. Without this,
pg_receivexlog always flushes WAL file only when it's closed and
which can cause WAL data to be lost at the event of a crash.
Furuya Osamu, heavily modified by me.
- Capitalize titles consistently.
- Fix some grammar.
- Group "Obtaining Information About an Error" under "Trapping Errors",
but make "Obtaining the Call Stack Context Information" its own
section, since it's not about errors.
Previously the duplicated paragraphs were used next to each other
in the document to demonstrate that the changes in the stream
were not consumed by pg_logical_slot_peek_changes function.
But some users misunderstood that the duplication of the same
paragraph was just typo. So this commit rewords the sentence in
the latter paragraph for less confusing.
Christoph Moench-Tegeder
The documentation of ALTER TABLESPACE ... MOVE was added without any
markup, not even paragraph breaks. Fix that, and clarify the text in a
few places.
The syntax summary previously failed to clarify that the first
argument is also optional. The textual description did mention it,
but all the way at the bottom. It fits better with the command
overview, so move it there, and fix the summary also.
Dilip Kumar, reviewed by Fabien Coelho
Break the list of available options into an <itemizedlist> instead of
inline sentences. This is mostly motivated by wanting to ensure that the
cross-references to the FSM and VM docs don't cross page boundaries in PDF
format; but it seems to me to read more easily this way anyway. I took the
liberty of editorializing a bit further while at it.
Per complaint from Magnus about 9.0.18 docs not building in A4 format.
Patch all active branches so we don't get blind-sided by this particular
issue again in future.
As usual, the release notes for older branches will be made by cutting
these down, but put them up for community review first.
Note: a few of these items actually don't apply to 9.3, but only to older
branches. I'll sort that out when copying the text into the older
release-X.Y.sgml files.
~/.pgpass is a sound choice everywhere, and "peer" authentication is
safe on every platform it supports. Cease to recommend "trust"
authentication, the safety of which is deeply configuration-specific.
Back-patch to 9.0, where pg_upgrade was introduced.
pg_ctl will log to the Windows event log when it is running as a service,
which is the primary way of running PostgreSQL on Windows. This option
makes it possible to specify which event source to use for this, in order
to separate different instances. The server logging itself is still controlled
by the regular logging parameters, including a separate setting for the event
source. The parameter to pg_ctl only controlls the logging from pg_ctl itself.
MauMau, review in many iterations by Amit Kapila and me.
This command provides an automated way to create foreign table definitions
that match remote tables, thereby reducing tedium and chances for error.
In this patch, we provide the necessary core-server infrastructure and
implement the feature fully in the postgres_fdw foreign-data wrapper.
Other wrappers will throw a "feature not supported" error until/unless
they are updated.
Ronan Dunklau and Michael Paquier, additional work by me
When the psql variable ECHO is set to 'erros', only failed SQL commands
are printed to standard error output. Also this patch adds -b option into psql.
This is equivalent to setting the variable ECHO to 'errors'.
Pavel Stehule, reviewed by Fabrízio de Royes Mello, Samrat Revagade,
Kumar Rajeev Rastogi, Abhijit Menon-Sen, and me.
Allow PL/Python functions to return arrays of composite types.
Also, fix the restriction that plpy.prepare/plpy.execute couldn't
handle query parameters or result columns of composite types.
In passing, adopt a saner arrangement for where to release the
tupledesc reference counts acquired via lookup_rowtype_tupdesc.
The callers of PLyObject_ToCompositeDatum were doing the lookups,
but then the releases happened somewhere down inside subroutines
of PLyObject_ToCompositeDatum, which is bizarre and bug-prone.
Instead release in the same function that acquires the refcount.
Ed Behn and Ronan Dunklau, reviewed by Abhijit Menon-Sen
The old name wasn't very descriptive as of actual contents of the
directory, which are historical snapshots in the snapshots/
subdirectory and mappingdata for rewritten tuples in
mappings/. There's been a fair amount of discussion what would be a
good name. I'm settling for pg_logical because it's likely that
further data around logical decoding and replication will need saving
in the future.
Also add the missing entry for the directory into storage.sgml's list
of PGDATA contents.
Bumps catversion as the data directories won't be compatible.
Historically these database properties could be manipulated only by
manually updating pg_database, which is error-prone and only possible for
superusers. But there seems no good reason not to allow database owners to
set them for their databases, so invent CREATE/ALTER DATABASE options to do
that. Adjust a couple of places that were doing it the hard way to use the
commands instead.
Vik Fearing, reviewed by Pavel Stehule
This could be useful in languages where diacritic signs are represented as
separate characters; more generally it supports using unaccent dictionaries
for substring substitutions beyond narrowly conceived "diacritic removal".
In any case, since the rule-file parser doesn't complain about
multi-character source strings, it behooves us to do something unsurprising
with them.
This is useful in languages where diacritic signs are represented as
separate characters; it's also one step towards letting unaccent be used
for arbitrary substring substitutions.
In passing, improve the user documentation for unaccent, which was sadly
vague about some important details.
Mohammad Alhashash, reviewed by Abhijit Menon-Sen
The "false" case was really quite useless since all it did was to throw
an error; a definition not helped in the least by making it the default.
Instead let's just have the "true" case, which emits nested objects and
arrays in JSON syntax. We might later want to provide the ability to
emit sub-objects in Postgres record or array syntax, but we'd be best off
to drive that off a check of the target field datatype, not a separate
argument.
For the functions newly added in 9.4, we can just remove the flag arguments
outright. We can't do that for json_populate_record[set], which already
existed in 9.3, but we can ignore the argument and always behave as if it
were "true". It helps that the flag arguments were optional and not
documented in any useful fashion anyway.
When running several postgres clusters on one OS instance it's often
inconveniently hard to identify which "postgres" process belongs to
which postgres instance.
Add the cluster_name GUC, whose value will be included as part of the
process titles if set. With that processes can more easily identified
using tools like 'ps'.
To avoid problems with encoding mismatches between postgresql.conf,
consoles, and individual databases replace non-ASCII chars in the name
with question marks. The length is limited to NAMEDATALEN to make it
less likely to truncate important information at the end of the
status.
Thomas Munro, with some adjustments by me and review by a host of people.
Support for running postgres on Alpha hasn't been tested for a long
while. Due to Alpha's uniquely lax cache coherency model it's a hard
to develop for platform (especially blindly!) and thought to be
unlikely to currently work correctly.
As Alpha is the only supported architecture for Tru64 drop support for
it as well. Tru64's support has ended 2012 and it has been in
maintenance-only mode for much longer.
Also remove stray references to __ksr__ and ultrix defines.
These should not have existed to begin with, but there was apparently some
misunderstanding of the purpose of the opr_sanity regression test item
that checks for operator implementation functions with their own comments.
The idea there is to check for unintentional violations of the rule that
operator implementation functions shouldn't be documented separately
.... but for these functions, that is in fact what we want, since the
variadic option is useful and not accessible via the operator syntax.
Get rid of the extra pg_proc entries and fix the regression test and
documentation to be explicit about what we're doing here.
7380b63 changed log_filename so that epoch was not appended to it
when no format specifier is given. But the example of CSV log file name
with epoch still left in log_filename document. This commit removes
such obsolete example.
This commit also documents the defaults of log_directory and
log_filename.
Backpatch to all supported versions.
Christoph Berg
By using curly braces, the template had specified that one of
"NOT DEFERRABLE", "INITIALLY IMMEDIATE", or "INITIALLY DEFERRED"
was required on any CREATE TRIGGER statement, which is not
accurate. Change to square brackets makes that optional.
Backpatch to 9.1, where the error was introduced.
The existance of the assert_enabled variable (backing the
debug_assertions GUC) reduced the amount of knowledge some static code
checkers (like coverity and various compilers) could infer from the
existance of the assertion. That could have been solved by optionally
removing the assertion_enabled variable from the Assert() et al macros
at compile time when some special macro is defined, but the resulting
complication doesn't seem to be worth the gain from having
debug_assertions. Recompiling is fast enough.
The debug_assertions GUC is still available, but readonly, as it's
useful when diagnosing problems. The commandline/client startup option
-A, which previously also allowed to enable/disable assertions, has
been removed as it doesn't serve a purpose anymore.
While at it, reduce code duplication in bufmgr.c and localbuf.c
assertions checking for spurious buffer pins. That code had to be
reindented anyway to cope with the assert_enabled removal.
data_directory could be set both in postgresql.conf and postgresql.auto.conf so far.
This could cause some problematic situations like circular definition. To avoid such
situations, this commit forbids a user to set data_directory in postgresql.auto.conf.
Backpatch this to 9.4 where ALTER SYSTEM command was introduced.
Amit Kapila, reviewed by Abhijit Menon-Sen, with minor adjustments by me.