Get rid of the fundamentally indefensible assumption that "long long int"
exists and is exactly 64 bits wide on every platform Postgres runs on.
Instead let the configure script select the type to use for "pg_int64".
This is a bit of a pain in the rear since we do not want to pollute client
namespace with all the random symbols that pg_config.h defines; instead
we have to create a separate generated header file, "pg_config_ext.h".
But now that the infrastructure is there, we might have the ability to
add some other stuff that's long been wanting in this area.
4TB large objects (standard 8KB BLCKSZ case). For this purpose new
libpq API lo_lseek64, lo_tell64 and lo_truncate64 are added. Also
corresponding new backend functions lo_lseek64, lo_tell64 and
lo_truncate64 are added. inv_api.c is changed to handle 64-bit
offsets.
Patch contributed by Nozomi Anzai (backend side) and Yugo Nagata
(frontend side, docs, regression tests and example program). Reviewed
by Kohei Kaigai. Committed by Tatsuo Ishii with minor editings.
Create an internal function pqDropConnection that does the physical socket
close and cleans up closely-associated state. This removes a bunch of ad
hoc, not always consistent closure code. The ulterior motive is to have a
single place to wait for a spawned child backend to exit, but this seems
like good cleanup even if that never happens.
I went back and forth on whether to include "conn->status = CONNECTION_BAD"
in pqDropConnection's actions, but for the moment decided not to. Only a
minority of the call sites actually want that, and in any case it's
arguable that conn->status is slightly higher-level state, and thus not
part of this function's purview.
After taking awhile to digest the row-processor feature that was added to
libpq in commit 92785dac2e, we've concluded
it is over-complicated and too hard to use. Leave the core infrastructure
changes in place (that is, there's still a row processor function inside
libpq), but remove the exposed API pieces, and instead provide a "single
row" mode switch that causes PQgetResult to return one row at a time in
separate PGresult objects.
This approach incurs more overhead than proper use of a row processor
callback would, since construction of a PGresult per row adds extra cycles.
However, it is far easier to use and harder to break. The single-row mode
still affords applications the primary benefit that the row processor API
was meant to provide, namely not having to accumulate large result sets in
memory before processing them. Preliminary testing suggests that we can
probably buy back most of the extra cycles by micro-optimizing construction
of the extra results, but that task will be left for another day.
Marko Kreen
Traditionally libpq has collected an entire query result before passing
it back to the application. That provides a simple and transactional API,
but it's pretty inefficient for large result sets. This patch allows the
application to process each row on-the-fly instead of accumulating the
rows into the PGresult. Error recovery becomes a bit more complex, but
often that tradeoff is well worth making.
Kyotaro Horiguchi, reviewed by Marko Kreen and Tom Lane
Both libpq and the backend would truncate a common name extracted from a
certificate at 32 bytes. Replace that fixed-size buffer with dynamically
allocated string so that there is no hard limit. While at it, remove the
code for extracting peer_dn, which we weren't using for anything; and
don't bother to store peer_cn longer than we need it in libpq.
This limit was not so terribly unreasonable when the code was written,
because we weren't using the result for anything critical, just logging it.
But now that there are options for checking the common name against the
server host name (in libpq) or using it as the user's name (in the server),
this could result in undesirable failures. In the worst case it even seems
possible to spoof a server name or user name, if the correct name is
exactly 32 bytes and the attacker can persuade a trusted CA to issue a
certificate in which that string is a prefix of the certificate's common
name. (To exploit this for a server name, he'd also have to send the
connection astray via phony DNS data or some such.) The case that this is
a realistic security threat is a bit thin, but nonetheless we'll treat it
as one.
Back-patch to 8.4. Older releases contain the faulty code, but it's not
a security problem because the common name wasn't used for anything
interesting.
Reported and patched by Heikki Linnakangas
Security: CVE-2012-0867
In some hopeless situations, certain library functions in libpq and
libpgport quit the program. Use abort() for that instead of exit(),
so we don't interfere with the normal exit codes the program might
use, we clearly signal the abnormal termination, and the caller has a
chance of catching the termination.
This was originally pointed out by Debian's Lintian program.
The style is set to "printf" for backwards compatibility everywhere except
on Windows, where it is set to "gnu_printf", which eliminates hundreds of
false error messages from modern versions of gcc arising from %m and %ll{d,u}
formats.
Add a new libpq connection option client_encoding (which includes the
existing PGCLIENTENCODING environment variable), which besides an
encoding name accepts a special value "auto" that tries to determine
the encoding from the locale in the client's environment, using the
mechanisms that have been in use in initdb.
psql sets this new connection option to "auto" when running from a
terminal and not overridden by setting PGCLIENTENCODING.
original code by Heikki Linnakangas, with subsequent contributions by
Jaime Casanova, Peter Eisentraut, Stephen Frost, Ibrar Ahmed
Basically, we want to distinguish all cases where the connection was
not made from those where it was. A convenient proxy for this is to
see if we got a message with a SQLSTATE code back from the postmaster.
This presumes that the postmaster will always send us a SQLSTATE in
a failure message, which is true for 7.4 and later postmasters in
every case except fork failure. (We could possibly complicate the
postmaster code to do something about that, but it seems not worth
the trouble, especially since pg_ctl's response for that case should
be to keep waiting anyway.)
If we did get a SQLSTATE from the postmaster, there are basically only
two cases, as per last week's discussion: ERRCODE_CANNOT_CONNECT_NOW
and everything else. Any other error code implies that the postmaster
is in principle willing to accept connections, it just didn't like or
couldn't handle this particular request. We want to make a special
case for ERRCODE_CANNOT_CONNECT_NOW so that "pg_ctl start -w" knows
it should keep waiting.
In passing, pick names for the enum constants that are a tad less
likely to present collision hazards in future.
This adds a libpq connection parameter requirepeer that specifies the user
name that the server process is expected to run under.
reviewed by KaiGai Kohei
parameter against server cert's CN field) to succeed in the case where
both host and hostaddr are specified. As with the existing precedents
for Kerberos, GSSAPI, SSPI, it is the calling application's responsibility
that host and hostaddr match up --- we just use the host name as given.
Per bug #5559 from Christopher Head.
In passing, make the error handling and messages for the no-host-name-given
failure more consistent among these four cases, and correct a lie in the
documentation: we don't attempt to reverse-lookup host from hostaddr
if host is missing.
Back-patch to 8.4 where SSL cert verification was introduced.
This adds four additional connection parameters to libpq: keepalives,
keepalives_idle, keepalives_count, and keepalives_interval.
keepalives default to on, per discussion, but can be turned off by
specifying keepalives=0. The remaining parameters, where supported,
can be used to adjust how often keepalives are sent and how many
can be lost before the connection is broken.
The immediate motivation for this patch is to make sure that
walreceiver will eventually notice if the master reboots without
closing the connection cleanly, but it should be helpful in other
cases as well.
Tollef Fog Heen, Fujii Masao, and me.
This includes two new kinds of postmaster processes, walsenders and
walreceiver. Walreceiver is responsible for connecting to the primary server
and streaming WAL to disk, while walsender runs in the primary server and
streams WAL from disk to the client.
Documentation still needs work, but the basics are there. We will probably
pull the replication section to a new chapter later on, as well as the
sections describing file-based replication. But let's do that as a separate
patch, so that it's easier to see what has been added/changed. This patch
also adds a new section to the chapter about FE/BE protocol, documenting the
protocol used by walsender/walreceivxer.
Bump catalog version because of two new functions,
pg_last_xlog_receive_location() and pg_last_xlog_replay_location(), for
monitoring the progress of replication.
Fujii Masao, with additional hacking by me
is made, include it in the startup-packet options. This makes it work more
like every other libpq connection option, in particular it now has the same
response to RESET ALL as the rest. This also saves one network round trip
for new applications using application_name. The cost is that if the server
is pre-8.5, it'll reject the startup packet altogether, forcing us to retry
the entire connection cycle. But on balance we shouldn't be optimizing that
case in preference to the behavior with a new server, especially when doing
so creates visible behavioral oddities. Per discussion.
sockopt(SO_NOSIGPIPE) or the MSG_NOSIGNAL flag to send().
We assume these features are available if (1) the symbol is defined at
compile time and (2) the kernel doesn't reject the call at runtime.
It might turn out that there are some platforms where (1) and (2) are
true and yet the signal isn't really blocked, in which case applications
would die on server crash. If that sort of thing gets reported, then
we'll have to add additional defenses of some kind.
Jeremy Kerr
"verify-ca" and "verify-full".
Since "prefer" remains the default, this will make certificate validation
off by default, which should lead to less upgrade issues.
and certificate revokation list by using connection parameters or environment
variables.
Original patch by Mark Woodward, heavily reworked by Alvaro Herrera and
Magnus Hagander.
after each other (since we already add a newline on each, this makes them
multiline).
Previously a new error would just overwrite the old one, so for example any
error caused when trying to connect with SSL enabled would be overwritten
by the error message form the non-SSL connection when using sslmode=prefer.
that presence of the password in the conninfo string must be checked *before*
risking a connection attempt, there is no point in checking it afterwards.
This makes the specification of PQconnectionUsedPassword() a bit simpler
and perhaps more generally useful, too.
guarantees about whether event procedures will receive DESTROY events.
They no longer need to defend themselves against getting a DESTROY
without a successful prior CREATE.
Andrew Chernow
we are on a 64-bit machine (ie, size_t is wider than int) and someone passes
in a query string that approaches or exceeds INT_MAX bytes. Also, just for
paranoia's sake, guard against similar overflows in sizing the input buffer.
The backend will not in the foreseeable future be prepared to send or receive
strings exceeding 1GB, so I didn't take the more invasive step of switching
all the buffer index variables from int to size_t; though someday we might
want to do that.
I have a suspicion that this is not the only such bug in libpq, but this
fix is enough to take care of the crash reported by Francisco Reyes.
should always succeed, but in the likely event of a failure we would
previously fall through *without locking* - the new code will exit(1).
Printing the error message on stderr will not work for all applications, but
it's better than nothing at all - and our API doesn't provide a way to return
the error to the caller.
PQconnectionNeedsPassword function that tells the right thing for whether to
prompt for a password, and improve PQconnectionUsedPassword so that it checks
whether the password used by the connection was actually supplied as a
connection argument, instead of coming from environment or a password file.
Per bug report from Mark Cave-Ayland and subsequent discussion.
against a Unix server, and Windows-specific server-side authentication
using SSPI "negotiate" method (Kerberos or NTLM).
Only builds properly with MSVC for now.
Bruce Momjian
Tom Lane
Tatsuo Ishii
Peter Eisentraut
Magnus Hagander
Andrew Dunstan
Robert Haas
Heikki Linnakangas