As coded, the code would use as a base comparison the namespace OID from
the first object scanned in pg_depend when switching its namespace
dependency entry to the new one, and use it as a base of comparison for
any follow-up checks. It would also be used as the old namespace OID to
switch *from* for the extension's pg_depend entry. Hence, if the first
object scanned has a namespace different than the one stored in the
extension, we would finish by:
- Not checking that the extension objects map with the extension's
schema.
- Not switching the extension -> namespace dependency entry to the new
namespace provided by the user, making ALTER EXTENSION ineffective.
This issue exists since this command has been introduced in d9572c4 for
relocatable extension, so backpatch all the way down to 11. The test
case has been provided by Heikki, that I have tweaked a bit to show the
effects on pg_depend for the extension.
Reported-by: Heikki Linnakangas
Author: Michael Paquier, Heikki Linnakangas
Discussion: https://postgr.es/m/20eea594-a05b-4c31-491b-007b6fceef28@iki.fi
Backpatch-through: 11
locale_t is defined by POSIX.1-2008 and SUSv4, and available on all
targeted systems. For Windows, win32_port.h redirects to a partial
implementation called _locale_t. We can now remove a lot of
compile-time tests for HAVE_LOCALE_T, and associated comments and dead
code branches that were needed for older computers.
Since configure + MinGW builds didn't detect locale_t but now we assume
that all systems have it, further inconsistencies among the 3 Windows build
systems were revealed. With this commit, we no longer define
HAVE_WCSTOMBS_L and HAVE_MBSTOWCS_L on any Windows build system, but
we have logic to deal with that so that replacements are available where
appropriate.
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Tristan Partin <tristan@neon.tech>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CA%2BhUKGLg7_T2GKwZFAkEf0V7vbnur-NfCjZPKZb%3DZfAXSV1ORw%40mail.gmail.com
Commit 7b64e4b3 taught DropSubscription() to drop stats entry of
subscription that is not associated with a replication slot for apply
worker at DROP SUBSCRIPTION but missed covering the case where the
subscription is not associated with replication slots for both apply
worker and tablesync worker.
Also add a test to verify that the stats for slot-less subscription is
removed at DROP SUBSCRIPTION time.
Backpatch down to 15.
Author: Masahiko Sawada
Reviewed-by: Nathan Bossart, Hayato Kuroda, Melih Mutlu, Amit Kapila
Discussion: https://postgr.es/m/CAD21AoB71zkP7uPT7JDPsZcvp0749ExEQnOJxeNKPDFisHar+w@mail.gmail.com
Backpatch-through: 15
The VacAttrStats structure contained the whole Form_pg_attribute for a
column, but it actually only needs attstattarget from there. So
remove the Form_pg_attribute field and make a separate field for
attstattarget. This simplifies some code for extended statistics that
doesn't deal with a column but an expression, which had to fake up
pg_attribute rows to satisfy internal APIs. Also, we can remove some
comments that essentially said "don't look at pg_attribute directly".
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/d6069765-5971-04d3-c10d-e4f7b2e9c459%40eisentraut.org
Commit f24523672d fixed a memory leak by moving the modifiedCols bitmap
into the per-row memory context. In the case of AFTER UPDATE triggers,
the bitmap is however referenced from an event kept until the end of the
query, resulting in a use-after-free bug.
Fixed by copying the bitmap into the AfterTriggerEvents memory context,
which is the one where we keep the trigger events. There's only one
place that needs to do the copy, but the memory context may not exist
yet. Doing that in a separate function seems more readable.
Report by Alexander Pyhalov, fix by me. Backpatch to 13, where the
bitmap was added to the event by commit 71d60e2aa0.
Reported-by: Alexander Pyhalov
Backpatch-through: 13
Discussion: https://postgr.es/m/acddb17c89b0d6cb940eaeda18c08bbe@postgrespro.ru
The logic that introduced partitioned indexes missed a few things when
invalidating a partitioned index when these are created, still the code
is written to handle recursions:
1) If created from scratch because a mapping index could not be found,
the new index created could be itself invalid, if for example it was a
partitioned index with one of its leaves invalid.
2) A CCI was missing when indisvalid is set for a parent index, leading
to inconsistent trees when recursing across more than one level for a
partitioned index creation if an invalidation of the parent was
required.
This could lead to the creation of a partition index tree where some of
the partitioned indexes are marked as invalid, but some of the parents
are marked valid, which is not something that should happen (as
validatePartitionedIndex() defines, indisvalid is switched to true for a
partitioned index iff all its partitions are themselves valid).
This patch makes sure that indisvalid is set to false on a partitioned
index if at least one of its partition is invalid. The flag is set to
true if *all* its partitions are valid.
The regression test added in this commit abuses of a failed concurrent
index creation, marked as invalid, that maps with an index created on
its partitioned table afterwards.
Reported-by: Alexander Lakhin
Reviewed-by: Alexander Lakhin
Discussion: https://postgr.es/m/14987634-43c0-0cb3-e075-94d423607e08@gmail.com
Backpatch-through: 11
ALTER TABLE .. SET ACCESS METHOD was not registering a dependency to the
new access method with the relation altered in its rewrite phase, making
possible the drop of an access method even if there are relations that
depend on it. During the rewrite, a temporary relation is created to
build the new relation files before swapping the new and old files, and,
while the temporary relation was registering a correct dependency to the
new AM, the old relation did not do that. A dependency on the access
method is added when the relation files are swapped, which is the point
where pg_class is updated.
Materialized views and tables use the same code path, hence both were
impacted.
Backpatch down to 15, where this command has been introduced.
Reported-by: Alexander Lakhin
Reviewed-by: Nathan Bossart, Andres Freund
Discussion: https://postgr.es/m/18000-9145c25b1af475ca@postgresql.org
Backpatch-through: 15
A portion of ALTER TABLE .. ATTACH PARTITION is to ensure that the
partition being attached to the partitioned table has a correct set of
indexes, so as there is a consistent index mapping between the
partitioned table and its new-to-be partition. However, as introduced
in 8b08f7d, the current logic could choose an invalid index as a match,
which is something that can exist when dealing with more than two levels
of partitioning, like attaching a partitioned table (that has
partitions, with an index created by CREATE INDEX ON ONLY) to another
partitioned table.
A partitioned index with indisvalid set to false is equivalent to an
incomplete partition tree, meaning that an invalid partitioned index
does not have indexes defined in all its partitions. Hence, choosing an
invalid partitioned index can create inconsistent partition index trees,
where the parent attaching to is valid, but its partition may be
invalid.
In the report from Alexander Lakhin, this showed up as an assertion
failure when validating an index. Without assertions enabled, the
partition index tree would be actually broken, as indisvalid should
be switched to true for a partitioned index once all its partitions are
themselves valid. With two levels of partitioning, the top partitioned
table used a valid index and was able to link to an invalid index stored
on its partition, itself a partitioned table.
I have studied a few options here (like the possibility to switch
indisvalid to false for the parent), but came down to the conclusion
that we'd better rely on a simple rule: invalid indexes had better never
be chosen, so as the partition attached uses and creates indexes that
the parent expects. Some regression tests are added to provide some
coverage. Note that the existing coverage is not impacted.
This is a problem since partitioned indexes exist, so backpatch all the
way down to v11.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/14987634-43c0-0cb3-e075-94d423607e08@gmail.com
Backpatch-through: 11
Since 3db72eb, the query ID of utilities is generated using the Query
structure, making the use of the query string in JumbleQuery()
unnecessary. This commit removes the argument "querytext" from
JumbleQuery().
Reported-by: Joe Conway
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/ZJlQAWE4COFqHuAV@paquier.xyz
ff9618e82a introduced has_partition_ancestor_privs(), which is used
to check whether a user has MAINTAIN on any partition ancestors.
This involves syscache lookups, and presently this function does
not take any relation locks, so it is likely subject to the same
kind of cache lookup failures that were fixed by 19de0ab23c.
To fix this problem, this commit partially reverts ff9618e82a.
Specifically, it removes the partition-related changes, including
the has_partition_ancestor_privs() function mentioned above. This
means that MAINTAIN on a partitioned table is no longer sufficient
to perform maintenance commands on its partitions. This is more
like how privileges for maintenance commands work on supported
versions. Privileges are checked for each partition, so a command
that flows down to all partitions might refuse to process them
(e.g., if the current user doesn't have MAINTAIN on the partition).
In passing, adjust a few related comments and error messages, and
add a test for the privilege checks for CLUSTER on a partitioned
table.
Reviewed-by: Michael Paquier, Jeff Davis
Discussion: https://postgr.es/m/20230613211246.GA219055%40nathanxps13
The existing errhint message and docs were missing the fact that we can't
disassociate from the slot unless the subscription is disabled.
Author: Robert Sjöblom, Peter Smith
Reviewed-by: Peter Eisentraut, Amit Kapila
Backpatch-through: 11
Discussion: https://postgr.es/m/807bdf85-61ea-88e2-5712-6d9fcd4eabff@fortnox.se
ff9618e82a introduced the skip_privs parameter, which is used to
skip privilege checks when recursing to a relation's TOAST table.
This parameter should have been added as a flag bit in
VacuumParams->options instead.
Suggested-by: Michael Paquier
Reviewed-by: Michael Paquier, Jeff Davis
Discussion: https://postgr.es/m/ZIj4v1CwqlDVJZfB%40paquier.xyz
For CREATE DATABASE, make LOCALE parameter apply regardless of the
provider used. Also affects initdb and createdb --locale arguments.
Previously, LOCALE (and --locale) only affected the database default
collation when using the libc provider.
Discussion: https://postgr.es/m/1a63084d-221e-4075-619e-6b3e590f673e@enterprisedb.com
Reviewed-by: Peter Eisentraut
While executing maintenance operations (ANALYZE, CLUSTER, REFRESH
MATERIALIZED VIEW, REINDEX, or VACUUM), set search_path to
'pg_catalog, pg_temp' to prevent inconsistent behavior.
Functions that are used for functional indexes, in index expressions,
or in materialized views and depend on a different search path must be
declared with CREATE FUNCTION ... SET search_path='...'.
This change addresses a security risk introduced in commit 60684dd834,
where a role with MAINTAIN privileges on a table may be able to
escalate privileges to the table owner. That commit is not yet part of
any release, so no need to backpatch.
Discussion: https://postgr.es/m/e44327179e5c9015c8dda67351c04da552066017.camel%40j-davis.com
Reviewed-by: Greg Stark
Reviewed-by: Nathan Bossart
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
The two methods don't cooperate, so set_config_option("search_path",
...) has been ineffective under non-empty overrideStack. This defect
enabled an attacker having database-level CREATE privilege to execute
arbitrary code as the bootstrap superuser. While that particular attack
requires v13+ for the trusted extension attribute, other attacks are
feasible in all supported versions.
Standardize on the combination of NewGUCNestLevel() and
set_config_option("search_path", ...). It is newer than
PushOverrideSearchPath(), more-prevalent, and has no known
disadvantages. The "override" mechanism remains for now, for
compatibility with out-of-tree code. Users should update such code,
which likely suffers from the same sort of vulnerability closed here.
Back-patch to v11 (all supported versions).
Alexander Lakhin. Reported by Alexander Lakhin.
Security: CVE-2023-2454
CREATE SCHEMA AUTHORIZATION with appended schema elements can lead to
crashes when comparing the schema name of the query with the schemas
used in the qualification of some clauses in the elements' queries.
The origin of the problem is that the transformation routine for the
elements listed in a CREATE SCHEMA query uses as new, expected, schema
name the one listed in CreateSchemaStmt itself. However, depending on
the query, CreateSchemaStmt.schemaname may be NULL, being computed
instead from the role specification of the query given by the
AUTHORIZATION clause, that could be either:
- A user name string, with the new schema name being set to the same
value as the role given.
- Guessed from CURRENT_ROLE, SESSION_ROLE or CURRENT_ROLE, with a new
schema name computed from the security context where CREATE SCHEMA is
running.
Regression tests are added for CREATE SCHEMA with some appended elements
(some of them with schema qualifications), covering also some role
specification patterns.
While on it, this simplifies the context structure used during the
transformation of the elements listed in a CREATE SCHEMA query by
removing the fields for the role specification and the role type. They
were not used, and for the role specification this could be confusing as
the schema name may by extracted from that at the beginning of
CreateSchemaCommand().
This issue exists for a long time, so backpatch down to all the versions
supported.
Reported-by: Song Hongyu
Author: Michael Paquier
Reviewed-by: Richard Guo
Discussion: https://postgr.es/m/17909-f65c12dfc5f0451d@postgresql.org
Backpatch-through: 11
This reverts commit e056c557ae and minor later fixes thereof.
There's a few problems in this new feature -- most notably regarding
pg_upgrade behavior, but others as well. This new feature is not in any
way critical on its own, so instead of scrambling to fix it we revert it
and try again in early 17 with these issues in mind.
Discussion: https://postgr.es/m/3801207.1681057430@sss.pgh.pa.us
There's no need to check if opt->arg is NULL since defGetString() already
does that and raises an ERROR if it is. Let's just remove that check.
Also, combine the two remaining ERRORs into a single check. It seems
better to give an indication about what sort of values we're looking for
rather than just to state that the value given isn't valid. Make
BUFFER_USAGE_LIMIT uppercase in this ERROR message too. It's already
upper case in one other error message, so make that consistent.
Reported-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20230411.102335.1643720544536884844.horikyota.ntt@gmail.com
We now create pg_constaint rows for NOT NULL constraints with
contype='n'.
We propagate these constraints during operations such as adding
inheritance relationships, creating and attaching partitions, creating
tables LIKE other tables. We mostly follow the well-known rules of
conislocal and coninhcount that we have for CHECK constraints, with some
adaptations; for example, as opposed to CHECK constraints, we don't
match NOT NULL ones by name when descending a hierarchy to alter it;
instead we match by column number. This means we don't require the
constraint names to be identical across a hierarchy.
For now, we omit them from system catalogs. Maybe this is worth
reconsidering. We don't support NOT VALID nor DEFERRABLE clauses
either; these can be added as separate features later (this patch is
already large and complicated enough.)
This has been very long in the making. The first patch was written by
Bernd Helmle in 2010 to add a new pg_constraint.contype value ('n'),
which I (Álvaro) then hijacked in 2011 and 2012, until that one was
killed by the realization that we ought to use contype='c' instead:
manufactured CHECK constraints. However, later SQL standard
development, as well as nonobvious emergent properties of that design
(mostly, failure to distinguish them from "normal" CHECK constraints as
well as the performance implication of having to test the CHECK
expression) led us to reconsider this choice, so now the current
implementation uses contype='n' again.
In 2016 Vitaly Burovoy also worked on this feature[1] but found no
consensus for his proposed approach, which was claimed to be closer to
the letter of the standard, requiring additional pg_attribute columns to
track the OID of the NOT NULL constraint for that column.
[1] https://postgr.es/m/CAKOSWNkN6HSyatuys8xZxzRCR-KL1OkHS5-b9qd9bf1Rad3PLA@mail.gmail.com
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Bernd Helmle <mailings@oopsware.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/CACA0E642A0267EDA387AF2B%40%5B172.26.14.62%5D
Discussion: https://postgr.es/m/AANLkTinLXMOEMz+0J29tf1POokKi4XDkWJ6-DDR9BKgU@mail.gmail.com
Discussion: https://postgr.es/m/20110707213401.GA27098@alvh.no-ip.org
Discussion: https://postgr.es/m/1343682669-sup-2532@alvh.no-ip.org
Discussion: https://postgr.es/m/CAKOSWNkN6HSyatuys8xZxzRCR-KL1OkHS5-b9qd9bf1Rad3PLA@mail.gmail.com
Discussion: https://postgr.es/m/20220817181249.q7qvj3okywctra3c@alvherre.pgsql
1cbbee033 added BUFFER_USAGE_LIMIT to the VACUUM and ANALYZE commands, so
here we permit that option to be specified in vacuumdb.
In passing, adjust the documents for vacuum_buffer_usage_limit and the
BUFFER_USAGE_LIMIT VACUUM option to mention "kB" rather than "KB". Do the
same for the ERROR message in ExecVacuum() and
check_vacuum_buffer_usage_limit(). Without that we might tell a user that
the valid minimum value is 128 KB only to reject that because we accept
only "kB" and not "KB".
Also, add a small reminder comment in vacuum.h to try to trigger the
memory of anyone adding new fields to VacuumParams that they might want to
consider if vacuumdb needs to grow a new option too.
Author: Melanie Plageman
Reviewed-by: Justin Pryzby
Reviewed-by: David Rowley
Discussion: https://postgr.es/m/ZAzTg3iEnubscvbf@telsasoft.com
Add new options to the VACUUM and ANALYZE commands called
BUFFER_USAGE_LIMIT to allow users more control over how large to make the
buffer access strategy that is used to limit the usage of buffers in
shared buffers. Larger rings can allow VACUUM to run more quickly but
have the drawback of VACUUM possibly evicting more buffers from shared
buffers that might be useful for other queries running on the database.
Here we also add a new GUC named vacuum_buffer_usage_limit which controls
how large to make the access strategy when it's not specified in the
VACUUM/ANALYZE command. This defaults to 256KB, which is the same size as
the access strategy was prior to this change. This setting also
controls how large to make the buffer access strategy for autovacuum.
Per idea by Andres Freund.
Author: Melanie Plageman
Reviewed-by: David Rowley
Reviewed-by: Andres Freund
Reviewed-by: Justin Pryzby
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/20230111182720.ejifsclfwymw2reb@awork3.anarazel.de
Allow autovacuum to reload the config file more often so that cost-based
delay parameters can take effect while VACUUMing a relation. Previously,
autovacuum workers only reloaded the config file once per relation
vacuumed, so config changes could not take effect until beginning to
vacuum the next table.
Now, check if a reload is pending roughly once per block, when checking
if we need to delay.
In order for autovacuum workers to safely update their own cost delay
and cost limit parameters without impacting performance, we had to
rethink when and how these values were accessed.
Previously, an autovacuum worker's wi_cost_limit was set only at the
beginning of vacuuming a table, after reloading the config file.
Therefore, at the time that autovac_balance_cost() was called, workers
vacuuming tables with no cost-related storage parameters could still
have different values for their wi_cost_limit_base and wi_cost_delay.
Now that the cost parameters can be updated while vacuuming a table,
workers will (within some margin of error) have no reason to have
different values for cost limit and cost delay (in the absence of
cost-related storage parameters). This removes the rationale for keeping
cost limit and cost delay in shared memory. Balancing the cost limit
requires only the number of active autovacuum workers vacuuming a table
with no cost-based storage parameters.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAAKRu_ZngzqnEODc7LmS1NH04Kt6Y9huSjz5pp7%2BDXhrjDA0gw%40mail.gmail.com
Vacuum code run both by autovacuum workers and a backend doing
VACUUM/ANALYZE previously inspected VacuumCostLimit and VacuumCostDelay,
which are the global variables backing the GUCs vacuum_cost_limit and
vacuum_cost_delay.
Autovacuum workers needed to override these variables with their
own values, derived from autovacuum_vacuum_cost_limit and
autovacuum_vacuum_cost_delay and worker cost limit balancing logic.
This led to confusing code which, in some cases, both derived and
set a new value of VacuumCostLimit from VacuumCostLimit.
In preparation for refreshing these GUC values more often, introduce
new, independent global variables and add a function to update them
using the GUCs and existing logic.
Per suggestion by Kyotaro Horiguchi
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAAKRu_ZngzqnEODc7LmS1NH04Kt6Y9huSjz5pp7%2BDXhrjDA0gw%40mail.gmail.com
While vacuuming a table in failsafe mode, VacuumCostActive should
not be re-enabled. This currently isn't a problem because vacuum
cost parameters are only refreshed in between vacuuming tables and
failsafe status is reset for every table.
In preparation for allowing vacuum cost parameters to be updated
more frequently, elevate LVRelState->failsafe_active to a global,
VacuumFailsafeActive, which will be checked when determining whether
or not to re-enable vacuum cost-related delays.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAAKRu_ZngzqnEODc7LmS1NH04Kt6Y9huSjz5pp7%2BDXhrjDA0gw%40mail.gmail.com
vacuum() is used for both the VACUUM command and for autovacuum. There
were many prechecks being done inside vacuum() that were just not relevant
to autovacuum. Let's move the bulk of these into ExecVacuum() so that
they're only executed when running the VACUUM command. This removes a
small amount of overhead when autovacuum vacuums a table.
While we are at it, allocate VACUUM's BufferAccessStrategy in ExecVacuum()
and pass it into vacuum() instead of expecting vacuum() to make it if it's
not already made by the calling function. To make this work, we need to
create the vacuum memory context slightly earlier, so we now need to pass
that down to vacuum() so that it's available for use in other memory
allocations.
Author: Melanie Plageman
Reviewed-by: David Rowley
Discussion: https://postgr.es/m/20230405211534.4skgskbilnxqrmxg@awork3.anarazel.de
A few places are not converted. Some because they are tackled in later
commits (e.g. hio.c, xlogutils.c), some because they are more
complicated (e.g. brin_pageops.c). Having a few users of ReadBuffer(P_NEW) is
good anyway, to ensure the backward compat path stays working.
Discussion: https://postgr.es/m/20221029025420.eplyow6k7tgu6he3@awork3.anarazel.de
32fbe0239 changed things so we didn't bother allocating the
BufferAccessStrategy during VACUUM (ONLY_DATABASE_STATS); and VACUUM
(FULL), however, it forgot to consider that VACUUM (FULL, ANALYZE) is a
possible combination. That change would have resulted in such a command
allowing ANALYZE to make full use of shared buffers, which wasn't
intended, so fix that.
Reported-by: Melanie Plageman
Discussion: https://postgr.es/m/CAAKRu_bJRKe+v_=OqwC+5sA3j5qv8rqdAwy3+yHaO3wmtfrCRg@mail.gmail.com
Merge and hash joins can support antijoin with the non-nullable input
on the right, using very simple combinations of their existing logic
for right join and anti join. This gives the planner more freedom
about how to order the join. It's particularly useful for hash join,
since we may now have the option to hash the smaller table instead
of the larger.
Richard Guo, reviewed by Ronan Dunklau and myself
Discussion: https://postgr.es/m/CAMbWs48xh9hMzXzSy3VaPzGAz+fkxXXTUbCLohX1_L8THFRm2Q@mail.gmail.com
In v13 and v14, the ENABLE/DISABLE TRIGGER USER variant malfunctioned
on cloned triggers, failing to find the clones because it thought they
were system triggers. Other variants of ENABLE/DISABLE TRIGGER would
improperly apply a superuserness check. Fix by adjusting the is-it-
a-system-trigger check to match reality in those branches. (As far
as I can find, this is the only place that got it wrong.)
There's no such bug in v15/HEAD, because we revised the catalog
representation of system triggers to be what this code was expecting.
However, add the test case to these branches anyway, because this area
is visibly pretty fragile. Also remove an obsoleted comment.
The recent v15/HEAD commit 6949b921d fixed a nearby bug. I now see
that my commit message for that was inaccurate: the behavior of
recursing to clone triggers is older than v15, but it didn't apply
to the case in v13/v14 because in those branches parent partitioned
tables have no pg_trigger entries for foreign-key triggers. But add
the test case from that commit to v13/v14, just to show what is
happening there.
Per bug #17886 from DzmitryH.
Discussion: https://postgr.es/m/17886-5406d5d828aa4aa3@postgresql.org
fill_seq_fork_with_data(), used to initialize a new sequence relation, only
locked the buffer after calling PageInit(), even though PageInit() modifies
page contents.
This is unlikely to cause real-world issues, as the relation is exclusively
locked at that point, and the buffer not yet marked dirty, so other processes
should not access the buffer.
This issue looks to have been present since the introduction of sequences in
e8647c45d6.
Given the low risk, it does not seem worth backpatching the fix.
Discussion: https://postgr.es/m/20230404185501.wdkmo3k7bedlx6qk@awork3.anarazel.de
Convert to BCP47 language tags before storing in the catalog, except
during binary upgrade or when the locale comes from an existing
collation or template database.
The resulting language tags can vary slightly between ICU
versions. For instance, "@colBackwards=yes" is converted to
"und-u-kb-true" in older versions of ICU, and to the simpler (but
equivalent) "und-u-kb" in newer versions.
The process of canonicalizing to a language tag also understands more
input locale string formats than ucol_open(). For instance,
"fr_CA.UTF-8" is misinterpreted by ucol_open() and the region is
ignored; effectively treating it the same as the locale "fr" and
opening the wrong collator. Canonicalization properly interprets the
language and region, resulting in the language tag "fr-CA", which can
then be understood by ucol_open().
This commit fixes a problem in prior versions due to ucol_open()
misinterpreting locale strings as described above. For instance,
creating an ICU collation with locale "fr_CA.UTF-8" would store that
string directly in the catalog, which would later be passed to (and
misinterpreted by) ucol_open(). After this commit, the locale string
will be canonicalized to language tag "fr-CA" in the catalog, which
will be properly understood by ucol_open(). Because this fix affects
the resulting collator, we cannot change the locale string stored in
the catalog for existing databases or collations; otherwise we'd risk
corrupting indexes. Therefore, only canonicalize locales for
newly-created (not upgraded) collations/databases. For similar
reasons, do not backport.
Discussion: https://postgr.es/m/8c7af6820aed94dc7bc259d2aa7f9663518e6137.camel@j-davis.com
Reviewed-by: Peter Eisentraut
This option is normally false, but can be set to true to obtain
the legacy behavior where the subscription runs with the permissions
of the subscription owner rather than the permissions of the
table owner. The advantages of this mode are (1) it doesn't require
that the subscription owner have permission to SET ROLE to each
table owner and (2) since no role switching occurs, the
SECURITY_RESTRICTED_OPERATION restrictions do not apply.
On the downside, it allows any table owner to easily usurp
the privileges of the subscription owner - basically, to take
over their account. Because that's generally quite undesirable,
we don't make this mode the default, but we do make it available,
just in case the new behavior causes too many problems for someone.
Discussion: http://postgr.es/m/CA+TgmoZ-WEeG6Z14AfH7KhmpX2eFh+tZ0z+vf0=eMDdbda269g@mail.gmail.com
Up until now, logical replication actions have been performed as the
subscription owner, who will generally be a superuser. Commit
cec57b1a0f documented hazards
associated with that situation, namely, that any user who owns a
table on the subscriber side could assume the privileges of the
subscription owner by attaching a trigger, expression index, or
some other kind of executable code to it. As a remedy, it suggested
not creating configurations where users who are not fully trusted
own tables on the subscriber.
Although that will work, it basically precludes using logical
replication in the way that people typically want to use it,
namely, to replicate a database from one node to another
without necessarily having any restrictions on which database
users can own tables. So, instead, change logical replication to
execute INSERT, UPDATE, DELETE, and TRUNCATE operations as the
table owner when they are replicated.
Since this involves switching the active user frequently within
a session that is authenticated as the subscription user, also
impose SECURITY_RESTRICTED_OPERATION restrictions on logical
replication code. As an exception, if the table owner can SET
ROLE to the subscription owner, these restrictions have no
security value, so don't impose them in that case.
Subscription owners are now required to have the ability to
SET ROLE to every role that owns a table that the subscription
is replicating. If they don't, replication will fail. Superusers,
who normally own subscriptions, satisfy this property by default.
Non-superusers users who own subscriptions will need to be
granted the roles that own relevant tables.
Patch by me, reviewed (but not necessarily in its entirety) by
Jelte Fennema, Jeff Davis, and Noah Misch.
Discussion: http://postgr.es/m/CA+TgmoaSCkg9ww9oppPqqs+9RVqCexYCE6Aq=UsYPfnOoDeFkw@mail.gmail.com
Traditionally, vacuum always makes use of a buffer access strategy 32
buffers in size. This means that running vacuums tend not to cause too
many shared buffers to become dirty, however, this can cause vacuums to
run much more slowly than they otherwise could as WAL flushes will occur
more frequently due to having to flush WAL out to the LSN of the dirty
page before that page can be written to disk.
When we are performing failsafe VACUUMs (as added in 1e55e7d17), we really
want to make the vacuum work go as quickly as possible, so here we disable
the buffer access strategy when entering failsafe mode while vacuuming a
relation.
Per idea and analyis from Andres Freund.
In passing, also include some changes I had intended for 32fbe0239.
Author: Melanie Plageman
Reviewed-by: Justin Pryzby, David Rowley
Discussion: https://postgr.es/m/20230111182720.ejifsclfwymw2reb%40awork3.anarazel.de
VACUUM FULL and VACUUM ONLY_DATABASE_STATS will not use the vacuum
strategy ring created in vacuum(), so don't waste effort making it in
those cases.
There are other conceivable cases where the buffer strategy also won't be
used, but those are probably less common and not worth troubling over too
much. For example VACUUM (PROCESS_MAIN false, PROCESS_TOAST false).
There are other cases too, but many of these are only discovered once
inside vacuum_rel().
Author: Melanie Plageman
Reviewed-by: David Rowley
Discussion: https://postgr.es/m/CAAKRu_ZLRuzkM3zKogiZAz2hUony37yLY4aaLb8fPf8fgqs5Og@mail.gmail.com
Using global variables because we don't want to pass these values around
as parameters does not really seem like a great idea, so let's remove
these two global variables and adjust a few functions to accept these
values as parameters instead.
This is part of a wider patch which intends to allow the size of the
buffer access strategy that vacuum uses to be adjusted.
Author: Melanie Plageman
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/CAAKRu_b1q_07uquUtAvLqTM%3DW9nzee7QbtzHwA4XdUo7KX_Cnw%40mail.gmail.com
This is done in preparation for logical decoding on standby, which needs to
include whether visibility affecting WAL records are about a (user) catalog
table. Which is only known for the table, not the indexes.
It's also nice to be able to pass the heap relation to GlobalVisTestFor() in
vacuumRedirectAndPlaceholder().
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/21b700c3-eecf-2e05-a699-f8c78dd31ec7@gmail.com
Up through v11 it was sensible to use the "oid" system column as
a foreign key column, but since that was removed there's no visible
usefulness in making any of the remaining system columns a foreign
key. Moreover, since the TupleTableSlot rewrites in v12, such cases
actively fail because of implicit assumptions that only user columns
appear in foreign keys. The lack of complaints about that seems
like good evidence that no one is trying to do it. Hence, rather
than trying to repair those assumptions (of which there are at least
two, maybe more), let's just forbid the case up front.
Per this patch, a system column in either the referenced or
referencing side of a foreign key will draw this error; however,
putting one in the referenced side would have failed later anyway,
since we don't allow unique indexes to be made on system columns.
Per bug #17877 from Alexander Lakhin. Back-patch to v12; the
case still appears to work in v11, so we shouldn't break it there.
Discussion: https://postgr.es/m/17877-4bcc658e33df6de1@postgresql.org
The totalrows/totaldeadrows outputs were left uninitialized in cases
where we find no analyzable child tables of a partitioned table. This
could lead to setting the partitioned table's pg_class.reltuples value
to garbage. It's not clear that that would have any very bad effects
in practice, but fix it anyway because it's making valgrind unhappy.
Reported and diagnosed by Alexander Lakhin (bug #17880).
Discussion: https://postgr.es/m/17880-9282037c923d856e@postgresql.org
This role can be granted to non-superusers to allow them to issue
CREATE SUBSCRIPTION. The non-superuser must additionally have CREATE
permissions on the database in which the subscription is to be
created.
Most forms of ALTER SUBSCRIPTION, including ALTER SUBSCRIPTION .. SKIP,
now require only that the role performing the operation own the
subscription, or inherit the privileges of the owner. However, to
use ALTER SUBSCRIPTION ... RENAME or ALTER SUBSCRIPTION ... OWNER TO,
you also need CREATE permission on the database. This is similar to
what we do for schemas. To change the owner of a schema, you must also
have permission to SET ROLE to the new owner, similar to what we do
for other object types.
Non-superusers are required to specify a password for authentication
and the remote side must use the password, similar to what is required
for postgres_fdw and dblink. A superuser who wants a non-superuser to
own a subscription that does not rely on password authentication may
set the new password_required=false property on that subscription. A
non-superuser may not set password_required=false and may not modify a
subscription that already has password_required=false.
This new password_required subscription property works much like the
eponymous postgres_fdw property. In both cases, the actual semantics
are that a password is not required if either (1) the property is set
to false or (2) the relevant user is the superuser.
Patch by me, reviewed by Andres Freund, Jeff Davis, Mark Dilger,
and Stephen Frost (but some of those people did not fully endorse
all of the decisions that the patch makes).
Discussion: http://postgr.es/m/CA+TgmoaDH=0Xj7OBiQnsHTKcF2c4L+=gzPBUKSJLh8zed2_+Dg@mail.gmail.com
In ancient times, these belonged to arguments or fields that were
actually of type long, but now they are not anymore, so this "L"
decoration is just confusing. (Some other 0L and other "L" constants
remain, where they are actually associated with a long type.)
When there are multiple publications for a subscription and one of those
publishes via the parent table by using publish_via_partition_root and the
other one directly publishes the child table, we end up copying the same
data twice during initial synchronization. The reason for this was that we
get both the parent and child tables from the publisher and try to copy
the data for both of them.
This patch extends the function pg_get_publication_tables() to take a
publication list as its input parameter. This allows us to exclude a
partition table whose ancestor is published by the same publication list.
This problem does exist in back-branches but we decide to fix it there in
a separate commit if required. The fix for back-branches requires quite
complicated changes to fetch the required table information from the
publisher as we can't update the function pg_get_publication_tables() in
back-branches. We are not sure whether we want to deviate and complicate
the code in back-branches for this problem as there are no field reports
yet.
Author: Wang wei
Reviewed-by: Peter Smith, Jacob Champion, Kuroda Hayato, Vignesh C, Osumi Takamichi, Amit Kapila
Discussion: https://postgr.es/m/OS0PR01MB57167F45D481F78CDC5986F794B99@OS0PR01MB5716.jpnprd01.prod.outlook.com
For ICU collations, ensure that the locale's language exists in ICU,
and that the locale can be opened.
Basic validation helps avoid minor mistakes and misspellings, which
often fall back to the root locale instead of the intended
locale. It's even more important to avoid such mistakes in ICU
versions 54 and earlier, where the same (misspelled) locale string
could fall back to different locales depending on the environment.
Discussion: https://postgr.es/m/11b1eeb7e7667fdd4178497aeb796c48d26e69b9.camel@j-davis.com
Discussion: https://postgr.es/m/df2efad0cae7c65180df8e5ebb709e5eb4f2a82b.camel@j-davis.com
Reviewed-by: Peter Eisentraut
Change the columns attndims, attstattarget, and attinhcount from int32
to int16, and reorder a bit. This saves some space (currently 4
bytes) in pg_attribute and tuple descriptors, which translates into
small performance benefits and/or room for new columns in pg_attribute
needed by future features.
attndims and attinhcount are never realistically used with values
larger than int16. Just to be sure, add some overflow checks.
attstattarget is currently limited explicitly to 10000.
For consistency, pg_constraint.coninhcount is also changed like
attinhcount.
Discussion: https://www.postgresql.org/message-id/flat/d07ffc2b-e0e8-77f7-38fb-be921dff71af%40enterprisedb.com
find_composite_type_dependencies() ignored indexes, which is a poor
decision because an expression index could have a stored column of
a composite (or other container) type even when the underlying table
does not. Teach it to detect such cases and error out. We have to
work a bit harder than for other relations because the pg_depend entry
won't identify the specific index column of concern, but it's not much
new code.
This does not address bug #17872's original complaint that dropping
a column in such a type might lead to violations of the uniqueness
property that a unique index is supposed to ensure. That seems of
much less concern to me because it won't lead to crashes.
Per bug #17872 from Alexander Lakhin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17872-d0fbb799dc3fd85d@postgresql.org
When extracting an attr from a cached tuple in the syscache with
SysCacheGetAttr the isnull parameter must be checked in case the
attr cannot be NULL. For cases when this is known beforehand, a
wrapper is introduced which perform the errorhandling internally
on behalf of the caller, invoking an elog in case of a NULL attr.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/AD76405E-DB45-46B6-941F-17B1EB3A9076@yesql.se
The "partitions_total" and "partitions_done" fields were updated
as though the current level of partitioning was the only one.
In multi-level cases, not only could partitions_total change
over the course of the command, but partitions_done could go
backwards or exceed the currently-reported partitions_total.
Fix by setting partitions_total to the total number of direct
and indirect children once at command start, and then just
incrementing partitions_done at appropriate points. Invent
a new progress monitoring function "pgstat_progress_incr_param"
to simplify doing the latter. We can avoid adding cost for the
former when doing CREATE INDEX, because ProcessUtility already
enumerates the children and it's pretty easy to pass the count
down to DefineIndex. In principle the same could be done in
ALTER TABLE, but that's structurally difficult; for now, just
eat the cost of an extra find_all_inheritors scan in that case.
Ilya Gladyshev and Justin Pryzby
Discussion: https://postgr.es/m/a15f904a70924ffa4ca25c3c744cff31e0e6e143.camel@gmail.com
This provides a very simple way to see the generic plan for a
parameterized query. Without this, it's necessary to define
a prepared statement and temporarily change plan_cache_mode,
which is a bit tedious.
One thing that's a bit of a hack perhaps is that we disable
execution-time partition pruning when the GENERIC_PLAN option
is given. That's because the pruning code may attempt to
fetch the value of one of the parameters, which would fail.
Laurenz Albe, reviewed by Julien Rouhaud, Christoph Berg,
Michel Pelletier, Jim Jones, and myself
Discussion: https://postgr.es/m/0a29b954b10b57f0d135fe12aa0909bd41883eb0.camel@cybertec.at
@extschema:name@ extends the existing @extschema@ feature so that
we can also insert the schema name of some required extension,
thus making cross-extension references robust even if they are in
different schemas.
However, this has the same hazard as @extschema@: if the schema
name is embedded literally in an installed object, rather than being
looked up once during extension script execution, then it's no longer
safe to relocate the other extension to another schema. To deal with
that without restricting things unnecessarily, add a "no_relocate"
option to extension control files. This allows an extension to
specify that it cannot handle relocation of some of its required
extensions, even if in themselves those extensions are relocatable.
We detect "no_relocate" requests of dependent extensions during
ALTER EXTENSION SET SCHEMA.
Regina Obe, reviewed by Sandro Santilli and myself
Discussion: https://postgr.es/m/003001d8f4ae$402282c0$c0678840$@pcorp.us
When determining whether an index update may be skipped by using HOT, we
can ignore attributes indexed by block summarizing indexes without
references to individual tuples that need to be cleaned up.
A new type TU_UpdateIndexes provides a signal to the executor to
determine which indexes to update - no indexes, all indexes, or only the
summarizing indexes.
This also removes rd_indexattr list, and replaces it with rd_attrsvalid
flag. The list was not used anywhere, and a simple flag is sufficient.
This was originally committed as 5753d4ee32, but then got reverted by
e3fcca0d0d because of correctness issues.
Original patch by Josef Simanek, various fixes and improvements by Tomas
Vondra and me.
Authors: Matthias van de Meent, Josef Simanek, Tomas Vondra
Reviewed-by: Tomas Vondra, Alvaro Herrera
Discussion: https://postgr.es/m/05ebcb44-f383-86e3-4f31-0a97a55634cf@enterprisedb.com
Discussion: https://postgr.es/m/CAFp7QwpMRGcDAQumN7onN9HjrJ3u4X3ZRXdGFT0K5G2JWvnbWg%40mail.gmail.com
Mainly move some detail from errmsg to errdetail, remove explicit
mention of superuser where appropriate, since that is implied in most
permission checks, and make messages more uniform.
Author: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://www.postgresql.org/message-id/20230316234701.GA903298@nathanxps13
Commit 4753ef37 changed vacuum_delay_point() to use the WaitLatch() API,
to fix the problem that vacuum could keep running for a very long time
after the postmaster died.
Unfortunately, that broke commit caf626b2's support for fractional
vacuum_cost_delay, which shipped in PostgreSQL 12. WaitLatch() works in
whole milliseconds.
For now, revert the change from commit 4753ef37, but add an explicit
check for postmaster death. That's an extra system call on systems
other than Linux and FreeBSD, but that overhead doesn't matter much
considering that we willingly went to sleep and woke up again. (In
later work, we might add higher resolution timeouts to the latch API so
that we could do this with our standard programming pattern, but that
wouldn't be back-patched.)
Back-patch to 14, where commit 4753ef37 arrived.
Reported-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CAAKRu_b-q0hXCBUCAATh0Z4Zi6UkiC0k2DFgoD3nC-r3SkR3tg%40mail.gmail.com
This allows for a string which if an input field matches causes the
column's default value to be inserted. The advantage of this is that
the default can be inserted in some rows and not others, for which
non-default data is available.
The file_fdw extension is also modified to take allow use of this
option.
Israel Barth Rubio
Discussion: https://postgr.es/m/CAO_rXXAcqesk6DsvioOZ5zmeEmpUN5ktZf-9=9yu+DTr0Xr8Uw@mail.gmail.com
If MERGE attempts an UPDATE or DELETE on a table with BEFORE ROW
triggers, or a cross-partition UPDATE (with or without triggers), and
a concurrent UPDATE or DELETE happens, the merge code would fail.
In some cases this would lead to a crash, while in others it would
cause the wrong merge action to be executed, or no action at all. The
immediate cause of the crash was the trigger code calling
ExecGetUpdateNewTuple() as part of the EPQ mechanism, which fails
because during a merge ri_projectNew is NULL, since merge has its own
per-action projection information, which ExecGetUpdateNewTuple() knows
nothing about.
Fix by arranging for the trigger code to exit early, returning the
TM_Result and TM_FailureData information, if a concurrent modification
is detected, allowing the merge code to do the necessary EPQ handling
in its own way. Similarly, prevent the cross-partition update code
from doing any EPQ processing for a merge, allowing the merge code to
work out what it needs to do.
This leads to a number of simplifications in nodeModifyTable.c. Most
notably, the ModifyTableContext->GetUpdateNewTuple() callback is no
longer needed, and mergeGetUpdateNewTuple() can be deleted, since
there is no longer any requirement for get-update-new-tuple during a
merge. Similarly, ModifyTableContext->cpUpdateRetrySlot is no longer
needed. Thus ExecGetUpdateNewTuple() and the retry_slot handling of
ExecCrossPartitionUpdate() can be restored to how they were in v14,
before the merge code was added, and ExecMergeMatched() no longer
needs any special-case handling for cross-partition updates.
While at it, tidy up ExecUpdateEpilogue() a bit, making it handle
recheckIndexes locally, rather than passing it in as a parameter,
ensuring that it is freed properly. This dates back to when it was
split off from ExecUpdate() to support merge.
Per bug #17809 from Alexander Lakhin, and follow-up investigation of
bug #17792, also from Alexander Lakhin.
Back-patch to v15, where MERGE was introduced, taking care to preserve
backwards-compatibility of the trigger API in v15 for any extensions
that might use it.
Discussion:
https://postgr.es/m/17809-9e6650bef133f0fe%40postgresql.orghttps://postgr.es/m/17792-0f89452029662c36%40postgresql.org
The COPY documentation is quite clear that "COPY relation TO" copies
rows from only the named table, not any inheritance children it may
have. However, if you enabled row-level security on the table then
this stopped being true, because the code forgot to apply the ONLY
modifier in the "SELECT ... FROM relation" query that it constructs
in order to allow RLS predicates to be attached. Fix that.
Report and patch by Antonin Houska (comment adjustments and test case
by me). Back-patch to all supported branches.
Discussion: https://postgr.es/m/3472.1675251957@antos
This exposes the ICU facility to add custom collation rules to a
standard collation.
New options are added to CREATE COLLATION, CREATE DATABASE, createdb,
and initdb to set the rules.
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Discussion: https://www.postgresql.org/message-id/flat/821c71a4-6ef0-d366-9acf-bb8e367f739f@enterprisedb.com
Reformat some of the comments in MergeAttributes(). A lot of code has
been added here over time, and the comments could use a bit of editing
to make the code flow read better.
4211fbd has been handling PROCESS_MAIN in vacuum_rel() with an "if/else
if" structure to avoid an extra level of indentation, but this has been
found as being rather parse to read. This commit updates the code so as
we check for PROCESS_MAIN in a single place and then handle its
subpaths, FULL or non-FULL vacuums. Some comments are added to make
that clearer for the reader.
Reported-by: Melanie Plageman
Author: Nathan Bossart
Reviewed-by: Michael Paquier, Melanie Plageman
Discussion: https://postgr.es/m/20230306194009.5cn6sp3wjotd36nu@liskov
This routine is able to retrieve the OID of the schema used with an
extension (pg_extension.extnamespace), or InvalidOid if this information
is not available. plpgsql_check embeds a copy of this code when
performing checks on functions, as one out-of-core example.
Author: Pavel Stehule
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/CAFj8pRD+9x55hjDoi285jCcjPc8uuY_D+FLn5RpXggdz+4O2sQ@mail.gmail.com
While testing a fix for bug #17823, I discovered that EvalPlanQualStart
failed to copy es_rteperminfos from the parent EState, resulting in
failure if anything in EPQ execution wanted to consult that information.
This led me to conclude that commit a61b1f748 had been too haphazard
about where to fill es_rteperminfos, and that we need to be sure that
that happens exactly where es_range_table gets filled. So I changed the
signature of ExecInitRangeTable to help ensure that this new requirement
doesn't get missed. (Indeed, pgoutput.c was also failing to fill it.
Maybe we don't ever need it there, but I wouldn't bet on that.)
No test case yet; one will arrive with the fix for #17823.
But that needs to be back-patched, while this fix is HEAD-only.
Discussion: https://postgr.es/m/17823-b64909cf7d63de84@postgresql.org
Disabling this option is useful to run VACUUM (with or without FULL) on
only the toast table of a relation, bypassing the main relation. This
option is enabled by default.
Running directly VACUUM on a toast table was already possible without
this feature, by using the non-deterministic name of a toast relation
(as of pg_toast.pg_toast_N, where N would be the OID of the parent
relation) in the VACUUM command, and it required a scan of pg_class to
know the name of the toast table. So this feature is basically a
shortcut to be able to run VACUUM or VACUUM FULL on a toast relation,
using only the name of the parent relation.
A new switch called --no-process-main is added to vacuumdb, to work as
an equivalent of PROCESS_MAIN.
Regression tests are added to cover VACUUM and VACUUM FULL, looking at
pg_stat_all_tables.vacuum_count to see how many vacuums have run on
each table, main or toast.
Author: Nathan Bossart
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/20221230000028.GA435655@nathanxps13
Beginning in v15, if you apply ALTER TABLE ENABLE/DISABLE TRIGGER to
a partitioned table, it also affects the partitions' cloned versions
of the affected trigger(s). The initial implementation of this
located the clones by name, but that fails on foreign-key triggers
which have names incorporating their own OIDs. We can fix that, and
also make the behavior more bulletproof in the face of user-initiated
trigger renames, by identifying the cloned triggers by tgparentid.
Following the lead of earlier commits in this area, I took care not
to break ABI in the v15 branch, even though I rather doubt there
are any external callers of EnableDisableTrigger.
While here, update the documentation, which was not touched when
the semantics were changed.
Per bug #17817 from Alan Hodgson. Back-patch to v15; older versions
do not have this behavior.
Discussion: https://postgr.es/m/17817-31dfb7c2100d9f3d@postgresql.org
Commit 0a20ff54f split out the GUC variables from guc.c into a new file
guc_tables.c. This updates comments referencing guc.c regarding variables
which are now in guc_tables.c.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/6B50C70C-8C1F-4F9A-A7C0-EEAFCC032406@yesql.se
WAL_LOG does a scan of the template's pg_class to determine the set of
relations that need to be copied from a template database to the new
one. However, as coded in 9c08aea, this copy strategy would load the
pages of pg_class without considering it as a permanent relation,
causing the loaded pages to never be flushed when they should. Any
modification of the template's pg_class, mostly through DDLs, would then
be missed, causing corruptions.
STRATEGY = WAL_LOG is the default over FILE_COPY since it has been
introduced, so any changes done to pg_class on a database template would
be gone. Updates of database templates should be a rare thing, so the
impact of this bug should be hopefully limited. The pre-14 default
strategy FILE_COPY is safe, and can be used as a workaround.
Ryo Matsumura has found and analyzed the issue, and Nathan has written a
test able to reproduce the failure (with few tweaks from me).
Backpatch down to 15, where STRATEGY = WAL_LOG has been introduced.
Author: Nathan Bossart, Ryo Matsumura
Reviewed-by: Dilip Kumar, Michael Paquier
Discussion: https://postgr.es/m/TYCPR01MB6868677E499C9AD5123084B5E8A39@TYCPR01MB6868.jpnprd01.prod.outlook.com
Backpatch-through: 15
In commit 8bf6ec3ba, I mistakenly supposed that MergeAttributes'
loop over saved_schema was reprocessing column definitions that
had already been checked earlier: there is a variant syntax for
creating a child partition in which that's not true. So we need
to duplicate the full check appearing further up.
(Actually, I believe that the "if (restdef->identity)" part is
not reachable, because we reject identity on partitions earlier.
But it seems wise to keep the check, in case that's ever relaxed,
and to keep this code in sync with the other instance.)
Per report from Alexander Lakhin.
Discussion: https://postgr.es/m/4a8200ca-8378-653e-38ed-b2e1f1611aa6@gmail.com
force_parallel_mode is meant to be used to allow us to exercise the
parallel query infrastructure to ensure that it's working as we expect.
It seems some users think this GUC is for forcing the query planner into
picking a parallel plan regardless of the costs. A quick look at the
documentation would have made them realize that they were wrong, but the
GUC is likely too conveniently named which, evidently, seems to often
result in users expecting that it forces the planner into usefully
parallelizing queries.
Here we rename the GUC to something which casual users are less likely to
mistakenly think is what they need to make their query run more quickly.
For now, the old name can still be used. We'll revisit if the old name
mapping can be removed once the buildfarm configs are all updated.
Reviewed-by: John Naylor
Discussion: https://postgr.es/m/CAApHDvrsOi92_uA7PEaHZMH-S4Xv+MGhQWA+GrP8b1kjpS1HjQ@mail.gmail.com
Here remove some dead code from heapgettup() and heapgettup_pagemode()
which was trying to support NoMovementScanDirection scans. This code can
never be reached as standard_ExecutorRun() never calls ExecutePlan with
NoMovementScanDirection.
Additionally, plans which were scanning an unordered index would use
NoMovementScanDirection rather than ForwardScanDirection. There was no
real need for this, so here we adjust this so we use ForwardScanDirection
for unordered index scans. A comment in pathnodes.h claimed that
NoMovementScanDirection was used for PathKey reasons, but if that was
true, it no longer is, per code in build_index_paths().
This does change the non-text format of the EXPLAIN output so that
unordered index scans now have a "Forward" scan direction rather than
"NoMovement". The text format of EXPLAIN has not changed.
Author: Melanie Plageman
Reviewed-by: Tom Lane, David Rowley
Discussion: https://postgr.es/m/CAAKRu_bvkhka0CZQun28KTqhuUh5ZqY=_T8QEqZqOL02rpi2bw@mail.gmail.com
Traditionally we used the same Var struct to represent the value
of a table column everywhere in parse and plan trees. This choice
predates our support for SQL outer joins, and it's really a pretty
bad idea with outer joins, because the Var's value can depend on
where it is in the tree: it might go to NULL above an outer join.
So expression nodes that are equal() per equalfuncs.c might not
represent the same value, which is a huge correctness hazard for
the planner.
To improve this, decorate Var nodes with a bitmapset showing
which outer joins (identified by RTE indexes) may have nulled
them at the point in the parse tree where the Var appears.
This allows us to trust that equal() Vars represent the same value.
A certain amount of klugery is still needed to cope with cases
where we re-order two outer joins, but it's possible to make it
work without sacrificing that core principle. PlaceHolderVars
receive similar decoration for the same reason.
In the planner, we include these outer join bitmapsets into the relids
that an expression is considered to depend on, and in consequence also
add outer-join relids to the relids of join RelOptInfos. This allows
us to correctly perceive whether an expression can be calculated above
or below a particular outer join.
This change affects FDWs that want to plan foreign joins. They *must*
follow suit when labeling foreign joins in order to match with the
core planner, but for many purposes (if postgres_fdw is any guide)
they'd prefer to consider only base relations within the join.
To support both requirements, redefine ForeignScan.fs_relids as
base+OJ relids, and add a new field fs_base_relids that's set up by
the core planner.
Large though it is, this commit just does the minimum necessary to
install the new mechanisms and get check-world passing again.
Follow-up patches will perform some cleanup. (The README additions
and comments mention some stuff that will appear in the follow-up.)
Patch by me; thanks to Richard Guo for review.
Discussion: https://postgr.es/m/830269.1656693747@sss.pgh.pa.us
When auto_explain.log_verbose is on, auto_explain should print in the
logs plans equivalent to the EXPLAIN (VERBOSE). However, when
compute_query_id is on, query identifiers were not showing up, being
only handled by EXPLAIN (VERBOSE). This brings auto_explain on par with
EXPLAIN regarding that. Note that like EXPLAIN, auto_explain does not
show the query identifier when compute_query_id=regress.
The change is done so as the choice of printing the query identifier is
done in ExplainPrintPlan() rather than in ExplainOnePlan(), to avoid a
duplication of the logic dealing with the query ID. auto_explain is the
only in-core caller of ExplainPrintPlan().
While looking at the area, I have noticed that more consolidation
between EXPLAIN and auto_explain would be in order for the logging of
the plan duration and the buffer usage. This refactoring is left as a
future change.
Author: Atsushi Torikoshi
Reviewed-by: Justin Pryzby, Julien Rouhaud
Discussion: https://postgr.es/m/1ea21936981f161bccfce05765c03bee@oss.nttdata.com
Eager freezing strategy avoids large build-ups of all-visible pages. It
makes VACUUM trigger page-level freezing whenever doing so will enable
the page to become all-frozen in the visibility map. This is useful for
tables that experience continual growth, particularly strict append-only
tables such as pgbench's history table. Eager freezing significantly
improves performance stability by spreading out the cost of freezing
over time, rather than doing most freezing during aggressive VACUUMs.
It complements the insert autovacuum mechanism added by commit b07642db.
VACUUM determines its freezing strategy based on the value of the new
vacuum_freeze_strategy_threshold GUC (or reloption) with logged tables.
Tables that exceed the size threshold use the eager freezing strategy.
Unlogged tables and temp tables always use eager freezing strategy,
since the added cost is negligible there. Non-permanent relations won't
incur any extra overhead in WAL written (for the obvious reason), nor in
pages dirtied (since any extra freezing will only take place on pages
whose PD_ALL_VISIBLE bit needed to be set either way).
VACUUM uses lazy freezing strategy for logged tables that fall under the
GUC size threshold. Page-level freezing triggers based on the criteria
established in commit 1de58df4, which added basic page-level freezing.
Eager freezing is strictly more aggressive than lazy freezing. Settings
like vacuum_freeze_min_age still get applied in just the same way in
every VACUUM, independent of the strategy in use. The only mechanical
difference between eager and lazy freezing strategies is that only the
former applies its own additional criteria to trigger freezing pages.
Note that even lazy freezing strategy will trigger freezing whenever a
page happens to have required that an FPI be written during pruning,
provided that the page will thereby become all-frozen in the visibility
map afterwards (due to the FPI optimization from commit 1de58df4).
The vacuum_freeze_strategy_threshold default setting is 4GB. This is a
relatively low setting that prioritizes performance stability. It will
be reviewed at the end of the Postgres 16 beta period.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Jeff Davis <pgsql@j-davis.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkFok_6EAHuK39GaW4FjEFQsY=3J0AAd6FXk93u-Xq3Fg@mail.gmail.com
Previously, a CREATEROLE user without SUPERUSER could not alter
REPLICATION users in any way, and could not set the BYPASSRLS
attribute. However, they could manipulate the CREATEDB property
even if they themselves did not possess it.
With this change, a CREATEROLE user without SUPERUSER can set or
clear the REPLICATION, BYPASSRLS, or CREATEDB property on a new
role or a role that they have rights to manage if and only if
that property is set for their own role.
This implements the standard idea that you can't give permissions
you don't have (but you can give the ones you do have). We might
in the future want to provide more powerful ways to constrain
what a CREATEROLE user can do - for example, to limit whether
CONNECTION LIMIT can be set or the values to which it can be set -
but that is left as future work.
Patch by me, reviewed by Nathan Bossart, Tushar Ahuja, and Neha
Sharma.
Discussion: http://postgr.es/m/CA+TgmobX=LHg_J5aT=0pi9gJy=JdtrUVGAu0zhr-i5v5nNbJDg@mail.gmail.com
Enforce wal_retrieve_retry_interval on a per-subscription basis,
rather than globally, and arrange to skip that delay in case of
an intentional worker exit. This probably makes little difference
in the field, where apply workers wouldn't be restarted often;
but it has a significant impact on the runtime of our logical
replication regression tests (even though those tests use
artificially-small wal_retrieve_retry_interval settings already).
Nathan Bossart, with mostly-cosmetic editorialization by me
Discussion: https://postgr.es/m/20221122004119.GA132961@nathanxps13
The motivation for this change is that when pg_dump dumps a
partitioned index that's marked REPLICA IDENTITY, it generates a
command sequence that applies REPLICA IDENTITY before the partitioned
index has been marked valid, causing restore to fail. We could
perhaps change pg_dump to not do it like that, but that would be
difficult and would not fix existing dump files with the problem.
There seems to be very little reason for the backend to disallow
this anyway --- the code ignores indisreplident when the index
isn't valid --- so instead let's fix it by allowing the case.
Commit 9511fb37a previously expressed a concern that allowing
indisreplident to be set on invalid indexes might allow us to
wind up in a situation where a table could have indisreplident
set on multiple indexes. I'm not sure I follow that concern
exactly, but in any case the only way that could happen is because
relation_mark_replica_identity is too trusting about the existing set
of markings being valid. Let's just rip out its early-exit code path
(which sure looks like premature optimization anyway; what are we
doing expending code to make redundant ALTER TABLE ... REPLICA
IDENTITY commands marginally faster and not-redundant ones marginally
slower?) and fix it to positively guarantee that no more than one
index is marked indisreplident.
The pg_dump failure can be demonstrated in all supported branches,
so back-patch all the way. I chose to back-patch 9511fb37a as well,
just to keep indisreplident handling the same in all branches.
Per bug #17756 from Sergey Belyashov.
Discussion: https://postgr.es/m/17756-dd50e8e0c8dd4a40@postgresql.org
This adjusts a few places which were appending a string constant
containing spaces onto a StringInfo. We have appendStringInfoSpaces for
that job, so let's use that instead.
For the change to jsonb.c's add_indent() function, appendStringInfoString
was being called inside a loop to append 4 spaces on each loop. This
meant that enlargeStringInfo would get called once per loop. Here it
should be much more efficient to get rid of the loop and just calculate
the number of spaces with "level * 4" and just append all the spaces in
one go.
Here we additionally adjust the appendStringInfoSpaces function so it
makes use of memset rather than a while loop to apply the required spaces
to the StringInfo. One of the problems with the while loop was that it
was incrementing one variable and decrementing another variable once per
loop. That's more work than what's required to get the job done. We may
as well use memset for this rather than trying to optimize the existing
loop. Some testing has shown memset is faster even for very small sizes.
Discussion: https://postgr.es/m/CAApHDvp_rKkvwudBKgBHniNRg67bzXVjyvVKfX0G2zS967K43A@mail.gmail.com
The rule system needs "old" and/or "new" pseudo-RTEs in rule actions
that are ON INSERT/UPDATE/DELETE. Historically it's put such entries
into the ON SELECT rules of views as well, but those are really quite
vestigial. The only thing we've used them for is to carry the
view's relid forward to AcquireExecutorLocks (so that we can
re-lock the view to verify it hasn't changed before re-using a plan)
and to carry its relid and permissions data forward to execution-time
permissions checks. What we can do instead of that is to retain
these fields of the RTE_RELATION RTE for the view even after we
convert it to an RTE_SUBQUERY RTE. This requires a tiny amount of
extra complication in the planner and AcquireExecutorLocks, but on
the other hand we can get rid of the logic that moves that data from
one place to another.
The principal immediate benefit of doing this, aside from a small
saving in the pg_rewrite data for views, is that these pseudo-RTEs
no longer trigger ruleutils.c's heuristic about qualifying variable
names when the rangetable's length is more than 1. That results
in quite a number of small simplifications in regression test outputs,
which are all to the good IMO.
Bump catversion because we need to dump a few more fields of
RTE_SUBQUERY RTEs. While those will always be zeroes anyway in
stored rules (because we'd never populate them until query rewrite)
they are useful for debugging, and it seems like we'd better make
sure to transmit such RTEs accurately in plans sent to parallel
workers. I don't think the executor actually examines these fields
after startup, but someday it might.
This is a second attempt at committing 1b4d280ea. The difference
from the first time is that now we can add some filtering rules to
AdjustUpgrade.pm to allow cross-version upgrade testing to pass
despite all the cosmetic changes in CREATE VIEW outputs.
Amit Langote (filtering rules by me)
Discussion: https://postgr.es/m/CA+HiwqEf7gPN4Hn+LoZ4tP2q_Qt7n3vw7-6fJKOf92tSEnX6Gg@mail.gmail.com
Discussion: https://postgr.es/m/891521.1673657296@sss.pgh.pa.us
Commit 60684dd8 left loose ends when it came to maintaining toast
tables or partitions.
For toast tables, simply skip the privilege check if the toast table
is an indirect target of the maintenance command, because the main
table privileges have already been checked.
For partitions, allow the maintenance command if the user has the
MAINTAIN privilege on the partition or any parent.
Also make CLUSTER emit "skipping" messages when the user doesn't have
privileges, similar to VACUUM.
Author: Nathan Bossart
Reported-by: Pavel Luzanov
Reviewed-by: Pavel Luzanov, Ted Yu
Discussion: https://postgr.es/m/20230113231339.GA2422750@nathanxps13
When VACUUM/ANALYZE are run on an entire database, it warns of
skipping relations for which the user doesn't have sufficient
privileges. That only makes sense for tables, so skip such messages
for indexes, etc.
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/c0a85c2e83158560314b576b6241c8ed0aea1745.camel%40j-davis.com
The prior behavior was confusing and hard to document. For instance,
if you had UPDATE privileges, you could lock a table in any lock mode
except ACCESS SHARE mode.
Now, if granted a privilege to lock at a given mode, one also has
privileges to lock at a less-conflicting mode. MAINTAIN, UPDATE,
DELETE, and TRUNCATE privileges allow any lock mode. INSERT privileges
allow ROW EXCLUSIVE (or below). SELECT privileges allow ACCESS SHARE.
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/9550c76535404a83156252b25a11babb4792ea1e.camel%40j-davis.com
This reverts commit 1b4d280ea1.
It's broken the buildfarm members that run cross-version-upgrade tests,
because they're not prepared to deal with cosmetic differences between
CREATE VIEW commands emitted by older servers and HEAD. Even if we had
a solution to that, which we don't, it'd take some time to roll it out
to the affected animals. This improvement isn't valuable enough to
justify addressing that problem on an emergency basis, so revert it
for now.
The rule system needs "old" and/or "new" pseudo-RTEs in rule actions
that are ON INSERT/UPDATE/DELETE. Historically it's put such entries
into the ON SELECT rules of views as well, but those are really quite
vestigial. The only thing we've used them for is to carry the
view's relid forward to AcquireExecutorLocks (so that we can
re-lock the view to verify it hasn't changed before re-using a plan)
and to carry its relid and permissions data forward to execution-time
permissions checks. What we can do instead of that is to retain
these fields of the RTE_RELATION RTE for the view even after we
convert it to an RTE_SUBQUERY RTE. This requires a tiny amount of
extra complication in the planner and AcquireExecutorLocks, but on
the other hand we can get rid of the logic that moves that data from
one place to another.
The principal immediate benefit of doing this, aside from a small
saving in the pg_rewrite data for views, is that these pseudo-RTEs
no longer trigger ruleutils.c's heuristic about qualifying variable
names when the rangetable's length is more than 1. That results
in quite a number of small simplifications in regression test outputs,
which are all to the good IMO.
Bump catversion because we need to dump a few more fields of
RTE_SUBQUERY RTEs. While those will always be zeroes anyway in
stored rules (because we'd never populate them until query rewrite)
they are useful for debugging, and it seems like we'd better make
sure to transmit such RTEs accurately in plans sent to parallel
workers. I don't think the executor actually examines these fields
after startup, but someday it might.
Amit Langote
Discussion: https://postgr.es/m/CA+HiwqEf7gPN4Hn+LoZ4tP2q_Qt7n3vw7-6fJKOf92tSEnX6Gg@mail.gmail.com
In both partitioning and traditional inheritance, require child
columns to be GENERATED if and only if their parent(s) are.
Formerly we allowed the case of an inherited column being
GENERATED when its parent isn't, but that results in inconsistent
behavior: the column can be directly updated through an UPDATE
on the parent table, leading to it containing a user-supplied
value that might not match the generation expression. This also
fixes an oversight that we enforced partition-key-columns-can't-
be-GENERATED against parent tables, but not against child tables
that were dynamically attached to them.
Also, remove the restriction that the child's generation expression
be equivalent to the parent's. In the wake of commit 3f7836ff6,
there doesn't seem to be any reason that we need that restriction,
since generation expressions are always computed per-table anyway.
By removing this, we can also allow a child to merge multiple
inheritance parents with inconsistent generation expressions, by
overriding them with its own expression, much as we've long allowed
for DEFAULT expressions.
Since we're rejecting a case that we used to accept, this doesn't
seem like a back-patchable change. Given the lack of field
complaints about the inconsistent behavior, it's likely that no
one is doing this anyway, but we won't change it in minor releases.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/2793383.1672944799@sss.pgh.pa.us
Can be set to the empty string, or to either or both of "set" or
"inherit". If set to a non-empty value, a non-superuser who creates
a role (necessarily by relying up the CREATEROLE privilege) will
grant that role back to themselves with the specified options.
This isn't a security feature, because the grant that this feature
triggers can also be performed explicitly. Instead, it's a user experience
feature. A superuser would necessarily inherit the privileges of any
created role and be able to access all such roles via SET ROLE;
with this patch, you can configure createrole_self_grant = 'set, inherit'
to provide a similar experience for a user who has CREATEROLE but not
SUPERUSER.
Discussion: https://postgr.es/m/CA+TgmobN59ct+Emmz6ig1Nua2Q-_o=r6DSD98KfU53kctq_kQw@mail.gmail.com
Previously, CREATEROLE users were permitted to make nearly arbitrary
changes to roles that they didn't create, with certain exceptions,
particularly superuser roles. Instead, allow CREATEROLE users to make such
changes to roles for which they possess ADMIN OPTION, and to
grant membership only in roles for which they possess ADMIN OPTION.
When a CREATEROLE user who is not a superuser creates a role, grant
ADMIN OPTION on the newly-created role to the creator, so that they
can administer roles they create or for which they have been given
privileges.
With these changes, CREATEROLE users still have very significant
powers that unprivileged users do not receive: they can alter, rename,
drop, comment on, change the password for, and change security labels
on roles. However, they can now do these things only for roles for
which they possess appropriate privileges, rather than all
non-superuser roles; moreover, they cannot grant a role such as
pg_execute_server_program unless they themselves possess it.
Patch by me, reviewed by Mark Dilger.
Discussion: https://postgr.es/m/CA+TgmobN59ct+Emmz6ig1Nua2Q-_o=r6DSD98KfU53kctq_kQw@mail.gmail.com
Currently, for large transactions, the publisher sends the data in
multiple streams (changes divided into chunks depending upon
logical_decoding_work_mem), and then on the subscriber-side, the apply
worker writes the changes into temporary files and once it receives the
commit, it reads from those files and applies the entire transaction. To
improve the performance of such transactions, we can instead allow them to
be applied via parallel workers.
In this approach, we assign a new parallel apply worker (if available) as
soon as the xact's first stream is received and the leader apply worker
will send changes to this new worker via shared memory. The parallel apply
worker will directly apply the change instead of writing it to temporary
files. However, if the leader apply worker times out while attempting to
send a message to the parallel apply worker, it will switch to
"partial serialize" mode - in this mode, the leader serializes all
remaining changes to a file and notifies the parallel apply workers to
read and apply them at the end of the transaction. We use a non-blocking
way to send the messages from the leader apply worker to the parallel
apply to avoid deadlocks. We keep this parallel apply assigned till the
transaction commit is received and also wait for the worker to finish at
commit. This preserves commit ordering and avoid writing to and reading
from files in most cases. We still need to spill if there is no worker
available.
This patch also extends the SUBSCRIPTION 'streaming' parameter so that the
user can control whether to apply the streaming transaction in a parallel
apply worker or spill the change to disk. The user can set the streaming
parameter to 'on/off', or 'parallel'. The parameter value 'parallel' means
the streaming will be applied via a parallel apply worker, if available.
The parameter value 'on' means the streaming transaction will be spilled
to disk. The default value is 'off' (same as current behaviour).
In addition, the patch extends the logical replication STREAM_ABORT
message so that abort_lsn and abort_time can also be sent which can be
used to update the replication origin in parallel apply worker when the
streaming transaction is aborted. Because this message extension is needed
to support parallel streaming, parallel streaming is not supported for
publications on servers < PG16.
Author: Hou Zhijie, Wang wei, Amit Kapila with design inputs from Sawada Masahiko
Reviewed-by: Sawada Masahiko, Peter Smith, Dilip Kumar, Shi yu, Kuroda Hayato, Shveta Mallik
Discussion: https://postgr.es/m/CAA4eK1+wyN6zpaHUkCLorEWNx75MG0xhMwcFhvjqm2KURZEAGw@mail.gmail.com
Waken related worker processes immediately at commit of a transaction
that has performed ALTER SUBSCRIPTION (including the RENAME and
OWNER variants). This reduces the response time for such operations.
In the real world that might not be worth much, but it shaves several
seconds off the runtime for the subscription test suite.
In the case of PREPARE, we just throw away this notification state;
it doesn't seem worth the work to preserve it. The workers will
still react after the eventual COMMIT PREPARED, but not as quickly.
Nathan Bossart
Discussion: https://postgr.es/m/20221122004119.GA132961@nathanxps13
VACUUM normally ends by running vac_update_datfrozenxid(), which
requires a scan of pg_class. Therefore, if one attempts to vacuum a
database one table at a time --- as vacuumdb has done since v12 ---
we will spend O(N^2) time in vac_update_datfrozenxid(). That causes
serious performance problems in databases with tens of thousands of
tables, and indeed the effect is measurable with only a few hundred.
To add insult to injury, only one process can run
vac_update_datfrozenxid at the same time per DB, so this behavior
largely defeats vacuumdb's -j option.
Hence, invent options SKIP_DATABASE_STATS and ONLY_DATABASE_STATS
to allow applications to postpone vac_update_datfrozenxid() until the
end of a series of VACUUM requests, and teach vacuumdb to use them.
Per bug #17717 from Gunnar L. Sadly, this answer doesn't seem
like something we'd consider back-patching, so the performance
problem will remain in v12-v15.
Tom Lane and Nathan Bossart
Discussion: https://postgr.es/m/17717-6c50eb1c7d23a886@postgresql.org
This is just refactoring; there should be no functonal change. It
might have the effect of slightly reducing the number of calls to
GetUserId(), but the real point is to facilitate future work in
this area.
Patch by me, reviewed by Mark Dilger.
Discussion: http://postgr.es/m/CA+TgmobFzTLkLwOquFrAcdsWBsOWDr-_H-jw+qBvfx-wSzMwDA@mail.gmail.com
Instead of having checks in AddRoleMems() and DelRoleMems(), have
the callers perform checks where it's required. In some cases it
isn't, either because the caller has already performed a check for
the same condition, or because the check couldn't possibly fail.
The "Skip permission check if nothing to do" check in each of
AddRoleMems() and DelRoleMems() is pointless. Some call sites
can't pass an empty list. Others can, but in those cases, the role
being modified is one that the current user has just created.
Therefore, they must have permission to modify it, and so no
permission check is required at all.
This patch is intended to have no user-visible consequences. It is
intended to simplify future work in this area.
Patch by me, reviewed by Mark Dilger.
Discussion: http://postgr.es/m/CA+TgmobFzTLkLwOquFrAcdsWBsOWDr-_H-jw+qBvfx-wSzMwDA@mail.gmail.com
Windows can enumerate the locales that are either installed or
supported by calling EnumSystemLocalesEx(), similar to what is already
done in the READ_LOCALE_A_OUTPUT switch. We can refactor some of the
logic already used in that switch into a new function
create_collation_from_locale().
The enumerated locales have BCP 47 shape, that is with a hyphen
between language and territory, instead of POSIX's underscore. The
created collations will retain the BCP 47 shape, but we will also
create a POSIX alias, so xx-YY will have an xx_YY alias.
A new test collate.windows.win1252 is added that is like
collate.linux.utf8.
Author: Juan Jose Santamaria Flecha <juanjo.santamaria@gmail.com>
Reviewed-by: Dmitry Koval <d.koval@postgrespro.ru>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/0050ec23-34d9-2765-9015-98c04f0e18ac@postgrespro.ru
Use a dedicated struct for the XID/MXID cutoffs used by VACUUM, such as
FreezeLimit and OldestXmin. This state is initialized in vacuum.c, and
then passed around by code from vacuumlazy.c to heapam.c freezing
related routines. The new convention is that everybody works off of the
same cutoff state, which is passed around via pointers to const.
Also simplify some of the logic for dealing with frozen xmin in
heap_prepare_freeze_tuple: add dedicated "xmin_already_frozen" state to
clearly distinguish xmin XIDs that we're going to freeze from those that
were already frozen from before. That way the routine's xmin handling
code is symmetrical with the existing xmax handling code. This is
preparation for an upcoming commit that will add page level freezing.
Also refactor the control flow within FreezeMultiXactId(), while adding
stricter sanity checks. We now test OldestXmin directly, instead of
using FreezeLimit as an inexact proxy for OldestXmin. This is further
preparation for the page level freezing work, which will make the
function's caller cede control of page level freezing to the function
where appropriate (where heap_prepare_freeze_tuple sees a tuple that
happens to contain a MultiXactId in its xmax).
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Jeff Davis <pgsql@j-davis.com>
Discussion: https://postgr.es/m/CAH2-WznS9TxXmz2_=SY+SyJyDFbiOftKofM9=aDo68BbXNBUMA@mail.gmail.com
A bitwise operator was getting used on two bools in
ATAddCheckConstraint() to track if constraints should be merged or not
with the existing ones of a relation, though obviously this should use
a boolean OR operator. This led to the same result, but let's be
clean.
Oversight in 074c5cf.
Author: Ranier Vilela
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/CAEudQAp2R2fbbi0OHHhv_n4=Ch0t1VtjObR9YMqtGKHJ+faUFQ@mail.gmail.com
This shaves some code by replacing the combinations of
CreateTemplateTupleDesc()/TupleDescInitEntry() hardcoding a mapping of
the attributes listed in pg_proc.dat by get_call_result_type() to build
the TupleDesc needed for the rows generated.
get_call_result_type() is more expensive than the former style, but this
removes some duplication with the lists of OUT parameters (pg_proc.dat
and the attributes hardcoded in these code paths). This is applied to
functions that are not considered as critical (aka that could be called
repeatedly for monitoring purposes).
Author: Bharath Rupireddy
Reviewed-by: Robert Haas, Álvaro Herrera, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACV23HW5HP5hFjd89FNS-z5X8r2jNXdMXcpN2BgTtKd87w@mail.gmail.com
During ALTER TABLE execution, when prep-time handling of subcommands of
certain types determine that execution-time handling requires recursion,
they signal this by changing the subcommand type to a special value.
This can be done in a simpler way by using a separate flag introduced by
commit ec0925c22a, so do that.
Catversion bumped. It's not clear to me that ALTER TABLE subcommands
are stored anywhere in catalogs (CREATE FUNCTION rejects it in BEGIN
ATOMIC function bodies), but we do have both write and read support for
them, so be safe.
Discussion: https://postgr.es/m/20220929090033.zxuaezcdwh2fgfjb@alvherre.pgsql
The USER SET flag specifies that the variable should be set on behalf of an
ordinary role. That lets ordinary roles set placeholder variables, which
permission requirements are not known yet. Such a value wouldn't be used if
the variable finally appear to require superuser privileges.
The new flags are stored in the pg_db_role_setting.setuser array. Catversion
is bumped.
This commit is inspired by the previous work by Steve Chavez.
Discussion: https://postgr.es/m/CAPpHfdsLd6E--epnGqXENqLP6dLwuNZrPMcNYb3wJ87WR7UBOQ%40mail.gmail.com
Author: Alexander Korotkov, Steve Chavez
Reviewed-by: Pavel Borisov, Steve Chavez
Currently, information about the permissions to be checked on relations
mentioned in a query is stored in their range table entries. So the
executor must scan the entire range table looking for relations that
need to have permissions checked. This can make the permission checking
part of the executor initialization needlessly expensive when many
inheritance children are present in the range range. While the
permissions need not be checked on the individual child relations, the
executor still must visit every range table entry to filter them out.
This commit moves the permission checking information out of the range
table entries into a new plan node called RTEPermissionInfo. Every
top-level (inheritance "root") RTE_RELATION entry in the range table
gets one and a list of those is maintained alongside the range table.
This new list is initialized by the parser when initializing the range
table. The rewriter can add more entries to it as rules/views are
expanded. Finally, the planner combines the lists of the individual
subqueries into one flat list that is passed to the executor for
checking.
To make it quick to find the RTEPermissionInfo entry belonging to a
given relation, RangeTblEntry gets a new Index field 'perminfoindex'
that stores the corresponding RTEPermissionInfo's index in the query's
list of the latter.
ExecutorCheckPerms_hook has gained another List * argument; the
signature is now:
typedef bool (*ExecutorCheckPerms_hook_type) (List *rangeTable,
List *rtePermInfos,
bool ereport_on_violation);
The first argument is no longer used by any in-core uses of the hook,
but we leave it in place because there may be other implementations that
do. Implementations should likely scan the rtePermInfos list to
determine which operations to allow or deny.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqGjJDmUhDSfv-U2qhKJjt9ST7Xh9JXC_irsAQ1TAUsJYg@mail.gmail.com
ri_RootToPartitionMap is currently only initialized for tuple routing
target partitions, though a future commit will need the ability to use
it even for the non-partition child tables, so make adjustments to the
decouple it from the partitioning code.
Also, make it lazily initialized via ExecGetRootToChildMap(), making
that function its preferred access path. Existing third-party code
accessing it directly should no longer do so; consequently, it's been
renamed to ri_RootToChildMap, which also makes it consistent with
ri_ChildToRootMap.
ExecGetRootToChildMap() houses the logic of setting the map appropriately
depending on whether a given child relation is partition or not.
To support this, also add a separate entry point for TupleConversionMap
creation that receives an AttrMap. No new code here, just split an
existing function in two.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqEYUhDXSK5BTvG_xk=eaAEJCD4GS3C6uH7ybBvv+Z_Tmg@mail.gmail.com
When it's given as true, return a 0 in the position of the missing
column rather than raising an error.
This is currently unused, but it allows us to reimplement column
permission checking in a subsequent commit. It seems worth breaking
into a separate commit because it affects unrelated code.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqFfiai=qBxPDTjaio_ZcaqUKh+FC=prESrB8ogZgFNNNQ@mail.gmail.com
Currently a table can only be vacuumed or analyzed by its owner or
a superuser. This can now be extended to any user by means of an
appropriate GRANT.
Nathan Bossart
Reviewed by: Bharath Rupireddy, Kyotaro Horiguchi, Stephen Frost, Robert
Haas, Mark Dilger, Tom Lane, Corey Huinker, David G. Johnston, Michael
Paquier.
Discussion: https://postgr.es/m/20220722203735.GB3996698@nathanxps13
The code has been assuming already in a few places that the initial
recursion nesting depth is 0, and the recent changes in hba.c (mainly
783e8c6) have relies on this assumption in more places. The maximum
recursion nesting level is assumed to be 10 for hba.c and GUCs.
Author: Julien Rouhaud
Discussion: https://postgr.es/m/20221124090724.n7amf5kpdhx6vb76@jrouhaud
Pass VACUUM parameters (VacuumParams state) to vacuum_set_xid_limits()
directly, rather than passing most individual VacuumParams fields as
separate arguments.
Also make vacuum_set_xid_limits() output parameter symbol names match
those used by its vacuumlazy.c caller.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wz=TE7gW5DgSahDkf0UEZigFGAoHNNN6EvSrdzC=Kn+hrA@mail.gmail.com
Similar to how the INHERIT option controls whether or not the
permissions of the granted role are automatically available to the
grantee, the new SET permission controls whether or not the grantee
may use the SET ROLE command to assume the privileges of the granted
role.
In addition, the new SET permission controls whether or not it
is possible to transfer ownership of objects to the target role
or to create new objects owned by the target role using commands
such as CREATE DATABASE .. OWNER. We could alternatively have made
this controlled by the INHERIT option, or allow it when either
option is given. An advantage of this approach is that if you
are granted a predefined role with INHERIT TRUE, SET FALSE, you
can't go and create objects owned by that role.
The underlying theory here is that the ability to create objects
as a target role is not a privilege per se, and thus does not
depend on whether you inherit the target role's privileges. However,
it's surely something you could do anyway if you could SET ROLE
to the target role, and thus making it contingent on whether you
have that ability is reasonable.
Design review by Nathan Bossat, Wolfgang Walther, Jeff Davis,
Peter Eisentraut, and Stephen Frost.
Discussion: http://postgr.es/m/CA+Tgmob+zDSRS6JXYrgq0NWdzCXuTNzT5eK54Dn2hhgt17nm8A@mail.gmail.com
Two locations working on pg_ts_config_map are switched from
CatalogTupleInsert() to a multi-insert approach with tuple slots:
- ALTER TEXT SEARCH CONFIGURATION ADD/ALTER MAPPING when inserting new
entries. The number of entries to insert is known in advance, so is the
number of slots needed. Note that CatalogTupleInsertWithInfo() is now
used for the entry updates.
- CREATE TEXT SEARCH CONFIGURATION, where up to ~20-ish records could be
inserted at once. The number of slots is not known in advance, hence
a slot initialization is delayed until a tuple is stored in it.
Like all the changes of this kind (1ff4161, 63110c6 or e3931d01), an
insert batch is capped at 64kB.
Author: Michael Paquier, Ranier Vilela
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/Y3M5bovrkTQbAO4W@paquier.xyz
This commit improves two code paths to open and close indexes a
minimum amount of times when doing a series of catalog updates or
inserts. CatalogTupleInsert() is costly when using it for multiple
inserts or updates compared to CatalogTupleInsertWithInfo(), as it would
need to open and close the indexes of the catalog worked each time an
operation is done.
This commit updates the following places:
- REINDEX CONCURRENTLY when copying statistics from one index relation
to the other. Multi-INSERTs are avoided here, as this would begin to
show benefits only for indexes with multiple expressions, for example,
which may not be the most common pattern. This change is noticeable in
profiles with indexes having many expressions, for example, and it would
improve any callers of CopyStatistics().
- Update of statistics on ANALYZE, that mixes inserts and updates.
In each case, the catalog indexes are opened only if at least one
insertion and/or update is required, to minimize the cost of the
operation. Like the previous coding, no indexes are opened as long as
at least one insert or update of pg_statistic has happened.
Author: Ranier Vilela
Reviewed-by: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/CAEudQAqh0F9y6Di_Wc8xW4zkWm_5SDd-nRfVsCn=h0Nm1C_mrg@mail.gmail.com
Some callers didn't check the return value of pclose() or
ClosePipeStream() correctly. Either they didn't check it at all or
they treated it like the return of fclose().
The correct way is to first check whether the return value is -1, and
then report errno, and then check the return value like a result from
system(), for which we already have wait_result_to_str() to make it
simpler. To make this more compact, expand wait_result_to_str() to
also handle -1 explicitly.
Reviewed-by: Ankit Kumar Pandey <itsankitkp@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/8cd9fb02-bc26-65f1-a809-b1cb360eef73@enterprisedb.com
Instead of dozens of mostly-duplicate pg_foo_aclcheck() functions,
write one common function object_aclcheck() that can handle almost all
of them. We already have all the information we need, such as which
system catalog corresponds to which catalog table and which column is
the ACL column.
There are a few pg_foo_aclcheck() that don't work via the generic
function and have special APIs, so those stay as is.
I also changed most pg_foo_aclmask() functions to static functions,
since they are not used outside of aclchk.c.
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Discussion: https://www.postgresql.org/message-id/flat/95c30f96-4060-2f48-98b5-a4392d3b6066@enterprisedb.com
Instead of dozens of mostly-duplicate pg_foo_ownercheck() functions,
write one common function object_ownercheck() that can handle almost
all of them. We already have all the information we need, such as
which system catalog corresponds to which catalog table and which
column is the owner column.
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Discussion: https://www.postgresql.org/message-id/flat/95c30f96-4060-2f48-98b5-a4392d3b6066@enterprisedb.com
Commit aa0105141 repeated one of the oldest mistakes in our book:
thinking that OID is the same as int32. It isn't of course, and
unsurprisingly the first person who came along with a database
OID above 2 billion broke it. Repair.
Per bug #17677 from Sergey Pankov. Back-patch to v15.
Discussion: https://postgr.es/m/17677-a99fa067d7ed71c9@postgresql.org
"Triggers on partitioned tables cannot have transition tables." is
incorrect as we allow statement-level triggers on partitioned tables to
have transition tables.
This has been wrong since commit 86f575948; back-patch to v11 where that
commit came in.
Reviewed by Tom Lane.
Discussion: https://postgr.es/m/CAPmGK17gk4vXLzz2iG%2BG4LWRWCoVyam70nZ3OuGm1hMJwDrhcg%40mail.gmail.com
Commit f56f8f8da6 added some code in CloneFkReferencing that's way too
lax about a Constraint node it manufactures, not initializing enough
struct members -- initially_valid in particular was forgotten. This
causes some FKs in partitions added by ALTER TABLE ATTACH PARTITION to
be marked as not validated. Set initially_valid true, which fixes the
bug.
While at it, make the struct initialization more complete. Very similar
code was added in two other places by the same commit; make them all
follow the same pattern for consistency, though no bugs are apparent
there.
This bug has never been reported: I only happened to notice while
working on commit 614a406b4f. The test case that was added there with
the improper result is repaired.
Backpatch to 12.
Discussion: https://postgr.es/m/20221005105523.bhuhkdx4olajboof@alvherre.pgsql
These two options are only available with COPY FROM, so the extra logic
in charge of checking the validity of the attributes given has no
purpose.
Author: Zhang Mingli
Reviewed-by: Richard Guo, Kyotaro Horiguchi
Discussion: https://postgr.es/m/F28F0B5A-766F-4D33-BF44-43B3A052D833@gmail.com
The original hint says to use SET PUBLICATION when really ADD/DROP
PUBLICATION is called for, so this is arguably a bug fix.
Also, a very similar message elsewhere was using an inconsistent
SQLSTATE.
While at it, unwrap some strings.
Backpatch to 15.
Author: Hou zj <houzj.fnst@fujitsu.com>
Discussion: https://postgr.es/m/OS0PR01MB57160AD0E7386547BA978EB394299@OS0PR01MB5716.jpnprd01.prod.outlook.com
Per discussion, the existing routine name able to initialize a SRF
function with materialize mode is unpopular, so rename it. Equally, the
flags of this function are renamed, as of:
- SRF_SINGLE_USE_EXPECTED -> MAT_SRF_USE_EXPECTED_DESC
- SRF_SINGLE_BLESS -> MAT_SRF_BLESS
The previous function and flags introduced in 9e98583 are kept around
for compatibility purposes, so as any extension code already compiled
with v15 continues to work as-is. The declarations introduced here for
compatibility will be removed from HEAD in a follow-up commit.
The new names have been suggested by Andres Freund and Melanie
Plageman.
Discussion: https://postgr.es/m/20221013194820.ciktb2sbbpw7cljm@awork3.anarazel.de
Backpatch-through: 15
When creating a cast that uses a conversion function, we've
historically allowed the input and result types to be
binary-compatible with the function's input and result types,
rather than necessarily being identical. This means that the new
cast is logically dependent on the binary-compatible cast or casts
that it references: if those are defined by pg_cast entries, and you
try to restore the new cast without having defined them, it'll fail.
Hence, we should make pg_depend entries to record these dependencies
so that pg_dump knows that there is an ordering requirement.
This is not the only place where we allow such shortcuts; aggregate
functions for example are similarly lax, and in principle should gain
similar dependencies. However, for now it seems sufficient to fix
the cast-versus-cast case, as pg_dump's other ordering heuristics
should keep it out of trouble for other object types.
Per report from David Turoň; thanks also to Robert Haas for
preliminary investigation. I considered back-patching, but
seeing that this issue has existed for many years without
previous reports, it's not clear it's worth the trouble.
Moreover, back-patching wouldn't be enough to ensure that the
new pg_depend entries exist in existing databases anyway.
Discussion: https://postgr.es/m/OF0A160F3E.578B15D1-ONC12588DA.003E4857-C12588DA.0045A428@notes.linuxbox.cz
The only real argument for using malloc directly was that we needed
the ability to not throw error on OOM; but mcxt.c grew that feature
awhile ago.
Keeping the data in a memory context improves accountability and
debuggability --- for example, without this it's almost impossible
to detect memory leaks in the GUC code with anything less costly
than valgrind. Moreover, the next patch in this series will add a
hash table for GUC lookup, and it'd be pretty silly to be using
palloc-dependent hash facilities alongside malloc'd storage of the
underlying data.
This is a bit invasive though, in particular causing an API break
for GUC check hooks that want to modify the GUC's value or use an
"extra" data structure. They must now use guc_malloc() and
guc_free() instead of malloc() and free(). Failure to change
affected code will result in assertion failures or worse; but
thanks to recent effort in the mcxt infrastructure, it shouldn't
be too hard to diagnose such oversights (at least in assert-enabled
builds).
One note is that this changes ParseLongOption() to return short-lived
palloc'd not malloc'd data. There wasn't any caller for which the
previous definition was better.
Discussion: https://postgr.es/m/2982579.1662416866@sss.pgh.pa.us
Commit 3d956d956 allowed the COPY, but it's done by inserting individual
rows to the foreign table, so it can be inefficient due to the overhead
caused by each round-trip to the foreign server. To improve performance
of the COPY in such a case, this patch allows batch insertion, by
extending the multi-insert machinery in CopyFrom() to the foreign-table
case so that we insert multiple rows to the foreign table at once using
the FDW callback routine added by commit b663a4136. This patch also
allows this for postgres_fdw. It is enabled by the "batch_size" option
added by commit b663a4136, which is disabled by default.
When doing batch insertion, we update progress of the COPY command after
performing the FDW callback routine, to count rows not suppressed by the
FDW as well as a BEFORE ROW INSERT trigger. For consistency, this patch
changes the timing of updating it for plain tables: previously, we
updated it immediately after adding each row to the multi-insert buffer,
but we do so only after writing the rows stored in the buffer out to the
table using table_multi_insert(), which I think would be consistent even
with non-batching mode, because in that mode we update it after writing
each row out to the table using table_tuple_insert().
Andrey Lepikhov, heavily revised by me, with review from Ian Barwick,
Andrey Lepikhov, and Zhihong Yu.
Discussion: https://postgr.es/m/bc489202-9855-7550-d64c-ad2d83c24867%40postgrespro.ru
Make a common replication origin name formatting function to replace
multiple snprintf() expressions. This also includes logic previously done
by ReplicationOriginNameForTablesync().
This makes the code to generate the origin name consistent among apply
worker and tablesync worker.
Author: Peter Smith
Reviewed-By: Aleksander Alekseev
Discussion: https://postgr.es/m/CAHut%2BPsa8hhfSE6ozUK-ih7GkQziAVAf4f3bqiXEj2nQiu-43g%40mail.gmail.com
This is useful as a way for extensions to process COPY TO rows in the
way they see fit (say auditing, analytics, backend, etc.) without the
need to invoke an external process running as the OS user running the
backend through PROGRAM that requires superuser rights. COPY FROM
already provides a similar callback for logical replication. For COPY
TO, the callback is triggered when we are ready to send a row in
CopySendEndOfRow(), which is the same code path as when sending a row
to a frontend or a pipe/file.
A small test module, test_copy_callbacks, is added to provide some
coverage for this facility.
Author: Bilva Sanaba, Nathan Bossart
Discussion: https://postgr.es/m/253C21D1-FCEB-41D9-A2AF-E6517015B7D7@amazon.com
There are a number of bugs in this area. Two of them are fixed here,
namely:
1. get_relation_idx_constraint_oid does not restrict the type of
constraint that's returned, so with sufficient bad luck it can
return the OID of a foreign key constraint. This has the effect that
a primary key in a partition can end up as a child of a foreign key,
which makes no sense (it needs to be the child of the equivalent
primary key.)
Change the API contract so that only index-backed constraints are
returned, mimicking get_constraint_index().
2. Both CloneFkReferenced and CloneFkReferencing clone a
self-referencing foreign key, so the partition ends up with
a duplicate foreign key. Change the former function to ignore such
constraints.
Add some tests to verify that things are better now. (However, these
new tests show some additional misbehavior that will be fixed later --
namely that there's a constraint marked NOT VALID.)
Backpatch to 12, where these constraints are possible at all.
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Discussion: https://postgr.es/m/20220603154232.1715b14c@karst
In a similar effort to f01592f91, here we mostly rename shadowed local
variables to remove the warnings produced when compiling with
-Wshadow=compatible-local.
This fixes 63 warnings and leaves just 5.
Author: Justin Pryzby, David Rowley
Reviewed-by: Justin Pryzby
Discussion https://postgr.es/m/20220817145434.GC26426%40telsasoft.com
This cleans up a couple of areas:
- Remove XLogSegNo calculation for the last WAL segment in backup in
xlog.c (7d70809 has moved this logic entirely to xlogbackup.c when
building the contents of the backup history file).
- Remove check on log_min_duration in analyze.c, as it is already true
where this code path is reached.
- Simplify call to find_option() in guc.c.
Author: Ranier Vilela
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/CAEudQArCDQQiPiFR16=yu9k5s2tp4tgEe1U1ZbkW4ofx81AWWQ@mail.gmail.com
Both check_application_name() and check_cluster_name() use
pg_clean_ascii() but didn't release the memory. Depending on when the
GUC is set, this might be cleaned up at some later time or it would
leak postmaster memory once. In any case, it seems better not to have
to rely on such analysis and make the code locally robust. Also, this
makes Valgrind happier.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Jacob Champion <jchampion@timescale.com>
Discussion: https://www.postgresql.org/message-id/CAD21AoBmFNy9MPfA0UUbMubQqH3AaK5U3mrv6pSeWrwCk3LJ8g@mail.gmail.com
This prevents marking the argument string for translation for gettext,
and it also prevents the given string (which is already translated) from
being translated at runtime.
Also, mark the strings used as arguments to check_rolespec_name for
translation.
Backpatch all the way back as appropriate. None of this is caught by
any tests (necessarily so), so I verified it manually.
There are still some alignment-related failures in the buildfarm,
which might or might not be able to be fixed quickly, but I've also
just realized that it increased the size of many WAL records by 4 bytes
because a block reference contains a RelFileLocator. The effect of that
hasn't been studied or discussed, so revert for now.
RelFileNumbers are now assigned using a separate counter, instead of
being assigned from the OID counter. This counter never wraps around:
if all 2^56 possible RelFileNumbers are used, an internal error
occurs. As the cluster is limited to 2^64 total bytes of WAL, this
limitation should not cause a problem in practice.
If the counter were 64 bits wide rather than 56 bits wide, we would
need to increase the width of the BufferTag, which might adversely
impact buffer lookup performance. Also, this lets us use bigint for
pg_class.relfilenode and other places where these values are exposed
at the SQL level without worrying about overflow.
This should remove the need to keep "tombstone" files around until
the next checkpoint when relations are removed. We do that to keep
RelFileNumbers from being recycled, but now that won't happen
anyway. However, this patch doesn't actually change anything in
this area; it just makes it possible for a future patch to do so.
Dilip Kumar, based on an idea from Andres Freund, who also reviewed
some earlier versions of the patch. Further review and some
wordsmithing by me. Also reviewed at various points by Ashutosh
Sharma, Vignesh C, Amul Sul, Álvaro Herrera, and Tom Lane.
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
While at it, remove an unused queryString parameter from
CheckPubRelationColumnList() and make other minor stylistic changes.
Backpatch to 15.
Reported by Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Co-authored-by: Hou zj <houzj.fnst@fujitsu.com>
Discussion: https://postgr.es/m/20220926.160426.454497059203258582.horikyota.ntt@gmail.com
Commit 25936fd46 adjusted things so that the "storeslot" we use
for remapping trigger tuples would have adequate lifespan, but it
neglected to consider the lifespan of the tuple descriptor that
the slot depends on. It turns out that in at least some cases, the
tupdesc we are passing is a refcounted tupdesc, and the refcount for
the slot's reference can get assigned to a resource owner having
different lifespan than the slot does. That leads to an error like
"tupdesc reference 0x7fdef236a1b8 is not owned by resource owner
SubTransaction". Worse, because of a second oversight in the same
commit, we'd try to free the same tupdesc refcount again while
cleaning up after that error, leading to recursive errors and an
"ERRORDATA_STACK_SIZE exceeded" PANIC.
To fix the initial problem, let's just make a non-refcounted copy
of the tupdesc we're supposed to use. That seems likely to guard
against additional problems, since there's no strong reason for
this code to assume that what it's given is a refcounted tupdesc;
in which case there's an independent hazard of the tupdesc having
shorter lifespan than the slot does. (I didn't bother trying to
free said copy, since it should go away anyway when the (sub)
transaction context is cleaned up.)
The other issue can be fixed by making the code added to
AfterTriggerFreeQuery work like the rest of that function, ie be
sure that it doesn't try to free the same slot twice in the event
of recursive error cleanup.
While here, also clean up minor stylistic issues in the test case
added by 25936fd46: don't use "create or replace function", as any
name collision within the tests is likely to have ill effects
that that won't mask; and don't use function names as generic as
trigger_function1, especially if you're not going to drop them
at the end of the test stanza.
Per bug #17607 from Thomas Mc Kay. Back-patch to v12, as the
previous fix was.
Discussion: https://postgr.es/m/17607-bd8ccc81226f7f80@postgresql.org
We previously thought that allowing such cases can confuse users when they
specify DROP TABLES IN SCHEMA but that doesn't seem to be the case based
on discussion. This helps to uplift the restriction during
ALTER TABLE ... SET SCHEMA which used to ensure that we couldn't end up
with a publication having both a schema and the same schema's table.
To allow this, we need to forbid having any schema on a publication if
column lists on a table are specified (and vice versa). This is because
otherwise we still need a restriction during ALTER TABLE ... SET SCHEMA to
forbid cases where it could lead to a publication having both a schema and
the same schema's table with column list.
Based on suggestions by Peter Eisentraut.
Author: Hou Zhijie and Vignesh C
Reviewed-By: Peter Smith, Amit Kapila
Backpatch-through: 15, where it was introduced
Discussion: https://postgr.es/m/2729c9e2-9aac-8cda-f2f4-34f2bcc18f4e@enterprisedb.com
This may be a bit too subtle, but removing that word from there makes
this clause no longer a perfect parallel of the GRANT variant "ALL
TABLES IN SCHEMA": indeed, for publications what we record is the schema
itself, not the tables therein, which means that any tables added to the
schema in the future are also published. This is completely different
to what GRANT does, which is affect only the tables that exist when the
command is executed.
There isn't resounding support for this change, but there are a few
positive votes and no opposition. Because the time to 15 RC1 is very
short, let's get this out now.
Backpatch to 15.
Discussion: https://postgr.es/m/2729c9e2-9aac-8cda-f2f4-34f2bcc18f4e
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
We check that the ICU locale is only specified if the ICU locale
provider is selected. But we did that too early. We need to wait
until we load the settings of the template database, since that could
also set what the locale provider is.
Reported-by: Marina Polyakova <m.polyakova@postgrespro.ru>
Discussion: https://www.postgresql.org/message-id/9ba4cd1ea6ed6b7b15c0ff15e6f540cd@postgrespro.ru
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in optimizer, parser,
utility, libpq, and "commands" code, as well as in remaining library
code. Do the same for all code related to frontend programs (with the
exception of pg_dump/pg_dumpall related code).
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will handle
ecpg and pg_dump/pg_dumpall.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in storage, catalog,
access method, executor, and logical replication code, as well as in
miscellaneous utility/library code.
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will do the
same for other parts of the codebase.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
Check in CREATE DATABASE and initdb that the selected encoding is
supported by ICU. Before, they would pass but users would later get
an error from the server when they tried to use the database.
Also document that initdb sets the encoding to UTF8 by default if the
ICU locale provider is chosen.
Author: Marina Polyakova <m.polyakova@postgrespro.ru>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/6dd6db0984d86a51b7255ba79f111971@postgrespro.ru
guc.c has grown to be one of our largest .c files, making it
a bottleneck for compilation. It's also acquired a bunch of
knowledge that'd be better kept elsewhere, because of our not
very good habit of putting variable-specific check hooks here.
Hence, split it up along these lines:
* guc.c itself retains just the core GUC housekeeping mechanisms.
* New file guc_funcs.c contains the SET/SHOW interfaces and some
SQL-accessible functions for GUC manipulation.
* New file guc_tables.c contains the data arrays that define the
built-in GUC variables, along with some already-exported constant
tables.
* GUC check/assign/show hook functions are moved to the variable's
home module, whenever that's clearly identifiable. A few hard-
to-classify hooks ended up in commands/variable.c, which was
already a home for miscellaneous GUC hook functions.
To avoid cluttering a lot more header files with #include "guc.h",
I also invented a new header file utils/guc_hooks.h and put all
the GUC hook functions' declarations there, regardless of their
originating module. That allowed removal of #include "guc.h"
from some existing headers. The fallout from that (hopefully
all caught here) demonstrates clearly why such inclusions are
best minimized: there are a lot of files that, for example,
were getting array.h at two or more levels of remove, despite
not having any connection at all to GUCs in themselves.
There is some very minor code beautification here, such as
renaming a couple of inconsistently-named hook functions
and improving some comments. But mostly this just moves
code from point A to point B and deals with the ensuing
needs for #include adjustments and exporting a few functions
that previously weren't exported.
Patch by me, per a suggestion from Andres Freund; thanks also
to Michael Paquier for the idea to invent guc_funcs.c.
Discussion: https://postgr.es/m/587607.1662836699@sss.pgh.pa.us
In commit f6c5edb8ab, we started to drop the replication origin slots
before tablesync worker exits to avoid consuming more slots than required.
We were dropping the replication origin in the same transaction where we
were marking the tablesync state as SYNCDONE. Now, if there is any error
after we have dropped the origin but before we commit the containing
transaction, the in-memory state of replication progress won't be rolled
back. Due to this, after the restart, tablesync worker can start streaming
from the wrong location and can apply the already processed transaction.
To fix this, we need to opportunistically drop the origin after marking
the tablesync state as SYNCDONE. Even, if the tablesync worker fails to
remove the replication origin before exit, the apply worker ensures to
clean it up afterward.
Reported by Tom Lane as per buildfarm.
Diagnosed-by: Masahiko Sawada
Author: Hou Zhijie
Reviewed-By: Masahiko Sawada, Amit Kapila
Discussion: https://postgr.es/m/20220714115155.GA5439@depesz.com
Discussion: https://postgr.es/m/CAD21AoAw0Oofi4kiDpJBOwpYyBBBkJj=sLUOn4Gd2GjUAKG-fw@mail.gmail.com
Because of inadequate filtering, the check triggers were confusing the
search for action triggers in GetForeignKeyActionTriggers and vice-versa
in GetForeignKeyCheckTriggers; this confusion results in seemingly
random assertion failures, and can have real impact in non-asserting
builds depending on catalog order. Change these functions so that they
correctly ignore triggers that are not relevant to each side.
To reduce the odds of further problems, do not break out of the
searching loop in assertion builds. This break is likely to hide bugs;
without it, we would have detected this bug immediately.
This problem was introduced by f4566345cf, so backpatch to 15 where
that commit first appeared.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/20220908172029.sejft2ppckbo6oh5@awork3.anarazel.de
Discussion: https://postgr.es/m/4104619.1662663056@sss.pgh.pa.us
During ALTER TABLE ATTACH PARTITION, if the name of a parent's foreign
key constraint is already used on the partition, the code tries to
choose another one before the FK attributes list has been populated,
so the resulting constraint name was "<relname>__fkey" instead of
"<relname>_<attrs>_fkey". Repair, and add a test case.
Backpatch to 12. In 11, the code to attach a partition was not smart
enough to cope with conflicting constraint names, so the problem doesn't
exist there.
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Discussion: https://postgr.es/m/20220901184156.738ebee5@karst
This commit raises a warning message for a combination of options
('copy_data = true' and 'origin = none') during CREATE/ALTER subscription
operations if the publication tables were also replicated from other
publishers.
During replication, we can skip the data from other origins as we have that
information in WAL but that is not possible during initial sync so we raise
a warning if there is such a possibility.
Author: Vignesh C
Reviewed-By: Peter Smith, Amit Kapila, Jonathan Katz, Shi yu, Wang wei
Discussion: https://www.postgresql.org/message-id/CALDaNm0gwjY_4HFxvvty01BOT01q_fJLKQ3pWP9=9orqubhjcQ@mail.gmail.com
Here we remove some dead code from CreateTriggerFiringOn() which was
attempting to find the relevant child partition index corresponding to the
given indexOid. As it turned out, thanks to -Wshadow=compatible-local,
this code was buggy as the code which was finding the child indexes
assigned those to a shadowed variable that directly went out of scope.
The code which thought it was looking at the List of child indexes was
always referencing an empty List.
On further investigation, this code is dead. We never call
CreateTriggerFiringOn() passing a valid indexOid in a way that the
function would actually ever execute the code in question. So, for lack
of a way to test if a fix actually works, let's just remove the dead code
instead.
As a reminder, if there is ever a need to resurrect this code, an Assert()
has been added to remind future feature developers that they might need to
write some code to find the corresponding child index.
Reported-by: Justin Pryzby
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/20220819211824.GX26426@telsasoft.com
The reverts the following and makes some associated cleanups:
commit f79b803dc: Common SQL/JSON clauses
commit f4fb45d15: SQL/JSON constructors
commit 5f0adec25: Make STRING an unreserved_keyword.
commit 33a377608: IS JSON predicate
commit 1a36bc9db: SQL/JSON query functions
commit 606948b05: SQL JSON functions
commit 49082c2cc: RETURNING clause for JSON() and JSON_SCALAR()
commit 4e34747c8: JSON_TABLE
commit fadb48b00: PLAN clauses for JSON_TABLE
commit 2ef6f11b0: Reduce running time of jsonb_sqljson test
commit 14d3f24fa: Further improve jsonb_sqljson parallel test
commit a6baa4bad: Documentation for SQL/JSON features
commit b46bcf7a4: Improve readability of SQL/JSON documentation.
commit 112fdb352: Fix finalization for json_objectagg and friends
commit fcdb35c32: Fix transformJsonBehavior
commit 4cd8717af: Improve a couple of sql/json error messages
commit f7a605f63: Small cleanups in SQL/JSON code
commit 9c3d25e17: Fix JSON_OBJECTAGG uniquefying bug
commit a79153b7a: Claim SQL standard compliance for SQL/JSON features
commit a1e7616d6: Rework SQL/JSON documentation
commit 8d9f9634e: Fix errors in copyfuncs/equalfuncs support for JSON node types.
commit 3c633f32b: Only allow returning string types or bytea from json_serialize
commit 67b26703b: expression eval: Fix EEOP_JSON_CONSTRUCTOR and EEOP_JSONEXPR size.
The release notes are also adjusted.
Backpatch to release 15.
Discussion: https://postgr.es/m/40d2c882-bcac-19a9-754d-4299e1d87ac7@postgresql.org
Before now, the cutoffs that VACUUM used to determine which XIDs/MXIDs
to freeze were determined at the start of each VACUUM by taking related
cutoffs that represent which XIDs/MXIDs VACUUM should treat as still
running, and subtracting an XID/MXID age based value controlled by GUCs
like vacuum_freeze_min_age. The FreezeLimit cutoff (XID freeze cutoff)
was derived by subtracting an XID age value from OldestXmin, while the
MultiXactCutoff cutoff (MXID freeze cutoff) was derived by subtracting
an MXID age value from OldestMxact. This approach didn't match the
approach used nearby to determine whether this VACUUM operation should
be an aggressive VACUUM or not.
VACUUM now uses the standard approach instead: it subtracts the same
age-based values from next XID/next MXID (rather than subtracting from
OldestXmin/OldestMxact). This approach is simpler and more uniform.
Most of the time it will have only a negligible impact on how and when
VACUUM freezes. It will occasionally make VACUUM more robust in the
event of problems caused by long running transaction. These are cases
where OldestXmin and OldestMxact are held back by so much that they
attain an age that is a significant fraction of the value of age-based
settings like vacuum_freeze_min_age.
There is no principled reason why freezing should be affected in any way
by the presence of a long-running transaction -- at least not before the
point that the OldestXmin and OldestMxact limits used by each VACUUM
operation attain an age that makes it unsafe to freeze some of the
XIDs/MXIDs whose age exceeds the value of the relevant age-based
settings. The new approach should at least make freezing degrade more
gracefully than before, even in the most extreme cases.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkOv5CEeyOO=c91XnT5WBR_0gii0Wn5UbZhJ=4TTykDYg@mail.gmail.com
Currently, the replication origin tracking of the tablesync worker is
dropped by the apply worker. So, there will be a small lag between the
tablesync worker exit and its origin tracking got removed. In the
meantime, new tablesync workers can be launched and will try to set up
a new origin tracking. This can lead the system to reach max configured
limit (max_replication_slots) even if the user has configured the max
limit considering the number of tablesync workers required in the system.
We decided not to back-patch as this can occur in very narrow
circumstances and users have to option to increase the configured limit by
increasing max_replication_slots.
Reported-by: Hubert Depesz Lubaczewski
Author: Ajin Cherian
Reviwed-by: Masahiko Sawada, Peter Smith, Hou Zhijie, Amit Kapila
Discussion: https://postgr.es/m/20220714115155.GA5439@depesz.com
In a similar effort to f01592f91, here we're targetting fixing the
warnings where we've deemed the shadowing variable to serve a close enough
purpose to the shadowed variable just to reuse the shadowed version and
not declare the shadowing variable at all.
By my count, this takes the warning count from 106 down to 71.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220825020839.GT2342@telsasoft.com
The GRANT statement can now specify WITH INHERIT TRUE or WITH
INHERIT FALSE to control whether the member inherits the granted
role's permissions. For symmetry, you can now likewise write
WITH ADMIN TRUE or WITH ADMIN FALSE to turn ADMIN OPTION on or off.
If a GRANT does not specify WITH INHERIT, the behavior based on
whether the member role is marked INHERIT or NOINHERIT. This means
that if all roles are marked INHERIT or NOINHERIT before any role
grants are performed, the behavior is identical to what we had before;
otherwise, it's different, because ALTER ROLE [NO]INHERIT now only
changes the default behavior of future grants, and has no effect on
existing ones.
Patch by me. Reviewed and testing by Nathan Bossart and Tushar Ahuja,
with design-level comments from various others.
Discussion: http://postgr.es/m/CA+Tgmoa5Sf4PiWrfxA=sGzDKg0Ojo3dADw=wAHOhR9dggV=RmQ@mail.gmail.com
These should have been included in 421892a19 as these shadowed variable
warnings can also be fixed by adjusting the scope of the shadowed variable
to put the declaration for it in an inner scope.
This is part of the same effort as f01592f91.
By my count, this takes the warning count from 114 down to 106.
Author: David Rowley and Justin Pryzby
Discussion: https://postgr.es/m/CAApHDvrwLGBP%2BYw9vriayyf%3DXR4uPWP5jr6cQhP9au_kaDUhbA%40mail.gmail.com
In a similar effort to f01592f91, here we're targetting fixing the
warnings that -Wshadow=compatible-local produces that we can fix by moving
a variable to an inner scope to stop that variable from being shadowed by
another variable declared somewhere later in the function.
All of the warnings being fixed here are changing the scope of variables
which are being used as an iterator for a "for" loop. In each instance,
the fix happens to be changing the for loop to use the C99 type
initialization. Much of this code likely pre-dates our use of C99.
Reducing the scope of the outer scoped variable seems like the safest way
to fix these. Renaming seems more likely to risk patches using the wrong
variable. Reducing the scope is more likely to result in a compilation
failure after applying some future patch rather than introducing bugs with
it.
By my count, this takes the warning count from 129 down to 114.
Author: Justin Pryzby
Discussion: https://postgr.es/m/CAApHDvrwLGBP%2BYw9vriayyf%3DXR4uPWP5jr6cQhP9au_kaDUhbA%40mail.gmail.com
Previously, membership of role A in role B could be recorded in the
catalog tables only once. This meant that a new grant of role A to
role B would overwrite the previous grant. For other object types, a
new grant of permission on an object - in this case role A - exists
along side the existing grant provided that the grantor is different.
Either grant can be revoked independently of the other, and
permissions remain so long as at least one grant remains. Make role
grants work similarly.
Previously, when granting membership in a role, the superuser could
specify any role whatsoever as the grantor, but for other object types,
the grantor of record must be either the owner of the object, or a
role that currently has privileges to perform a similar GRANT.
Implement the same scheme for role grants, treating the bootstrap
superuser as the role owner since roles do not have owners. This means
that attempting to revoke a grant, or admin option on a grant, can now
fail if there are dependent privileges, and that CASCADE can be used
to revoke these. It also means that you can't grant ADMIN OPTION on
a role back to a user who granted it directly or indirectly to you,
similar to how you can't give WITH GRANT OPTION on a privilege back
to a role which granted it directly or indirectly to you.
Previously, only the superuser could specify GRANTED BY with a user
other than the current user. Relax that rule to allow the grantor
to be any role whose privileges the current user posseses. This
doesn't improve compatibility with what we do for other object types,
where support for GRANTED BY is entirely vestigial, but it makes this
feature more usable and seems to make sense to change at the same time
we're changing related behaviors.
Along the way, fix "ALTER GROUP group_name ADD USER user_name" to
require the same privileges as "GRANT group_name TO user_name".
Previously, CREATEROLE privileges were sufficient for either, but
only the former form was permissible with ADMIN OPTION on the role.
Now, either CREATEROLE or ADMIN OPTION on the role suffices for
either spelling.
Patch by me, reviewed by Stephen Frost.
Discussion: http://postgr.es/m/CA+TgmoaFr-RZeQ+WoQ5nKPv97oT9+aDgK_a5+qWHSgbDsMp1Vg@mail.gmail.com
As such the current usage of & won't produce incorrect results but it
would be better to use && to short-circuit the evaluation of second
condition when the same is not required.
Author: Ranier Vilela
Reviewed-by: Tom Lane, Bharath Rupireddy
Backpatch-through: 15, where it was introduced
Discussion: https://postgr.es/m/CAEudQApL8QcoYwQuutkWKY_h7gBY8F0Xs34YKfc7-G0i83K_pw@mail.gmail.com
Consistently avoid trusting a sample of only one page at the point that
VACUUM determines a new reltuples for the target table (though only when
the table is larger than a single page). This is follow-up work to
commit 74388a1a, which added a heuristic to prevent reltuples from
becoming distorted by successive VACUUM operations that each scan only a
single heap page (which was itself more or less a bugfix for an issue in
commit 44fa8488, which simplified VACUUM's handling of scanned pages).
The original bugfix commit did not account for certain remaining cases
that where not affected by its "2% of total relpages" heuristic. This
happened with relations that are small enough that just one of its pages
exceeded the 2% threshold, yet still big enough for VACUUM to deem
skipping most of its pages via the visibility map worthwhile. reltuples
could still become distorted over time with such a table, at least in
scenarios where the VACUUM command is run repeatedly and without the
table itself ever changing.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wzk7d4m3oEbEWkWQKd+gz-eD_peBvdXVk1a_KBygXadFeg@mail.gmail.com
Backpatch: 15-, where the rules for scanned pages changed.
Initialize shared memory allocated for index stats to avoid a hard
crash. This was possible when parallel VACUUM became confused about the
current phase of index processing.
Oversight in commit 8e1fae1938, which refactored parallel VACUUM.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reported-By: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20220818133406.GL26426@telsasoft.com
Backpatch: 15-, the first version with the refactoring commit.
Previously, "GRANT foo TO bar" or "GRANT foo TO bar GRANTED BY baz"
would record the OID of the grantor in pg_auth_members.grantor, but
that role could later be dropped without modifying or removing the
pg_auth_members record. That's not great, because we typically try
to avoid dangling references in catalog data.
Now, a role grant depends on the grantor, and the grantor can't be
dropped without removing the grant or changing the grantor. "DROP
OWNED BY" will remove the grant, just as it does for other kinds of
privileges. "REASSIGN OWNED BY" will not, again just like what we do
in other cases involving privileges.
pg_auth_members now has an OID column, because that is needed in order
for dependencies to work. It also now has an index on the grantor
column, because otherwise dropping a role would require a sequential
scan of the entire table to see whether the role's OID is in use as
a grantor. That probably wouldn't be too large a problem in practice,
but it seems better to have an index just in case.
A follow-on patch is planned with the goal of more thoroughly
rationalizing the behavior of role grants. This patch is just trying
to do enough to make sure that the data we store in the catalogs is at
some basic level valid.
Patch by me, reviewed by Stephen Frost
Discussion: http://postgr.es/m/CA+TgmoaFr-RZeQ+WoQ5nKPv97oT9+aDgK_a5+qWHSgbDsMp1Vg@mail.gmail.com
When creating a partitioned index, DefineIndex tries to identify
any existing indexes on the partitions that match the partitioned
index, so that it can absorb those as child indexes instead of
building new ones. Part of the matching is to compare IndexInfo
structs --- but that wasn't done quite right. We're comparing
the IndexInfo built within DefineIndex itself to one made from
existing catalog contents by BuildIndexInfo. Notably, while
BuildIndexInfo will run index expressions and predicates through
expression preprocessing, that has not happened to DefineIndex's
struct. The result is failure to match and subsequent creation
of duplicate indexes.
The easiest and most bulletproof fix is to build a new IndexInfo
using BuildIndexInfo, thereby guaranteeing that the processing done
is identical.
While here, let's also extract the opfamily and collation data
from the new partitioned index, removing ad-hoc logic that
duplicated knowledge about how those are constructed.
Per report from Christophe Pettus. Back-patch to v11 where
we invented partitioned indexes.
Richard Guo and Tom Lane
Discussion: https://postgr.es/m/8864BFAA-81FD-4BF9-8E06-7DEB8D4164ED@thebuild.com
The standard way to check for list emptiness is to compare the
List pointer to NIL; our list code goes out of its way to ensure
that that is the only representation of an empty list. (An
acceptable alternative is a plain boolean test for non-null
pointer, but explicit mention of NIL is usually preferable.)
Various places didn't get that memo and expressed the condition
with list_length(), which might not be so bad except that there
were such a variety of ways to check it exactly: equal to zero,
less than or equal to zero, less than one, yadda yadda. In the
name of code readability, let's standardize all those spellings
as "list == NIL" or "list != NIL". (There's probably some
microscopic efficiency gain too, though few of these look to be
at all performance-critical.)
A very small number of cases were left as-is because they seemed
more consistent with other adjacent list_length tests that way.
Peter Smith, with bikeshedding from a number of us
Discussion: https://postgr.es/m/CAHut+PtQYe+ENX5KrONMfugf0q6NHg4hR5dAhqEXEc2eefFeig@mail.gmail.com
If an error occurs before we close the fake relcache entry, the the
fake relcache entry will be destroyed by the SmgrRelation will
survive until end of transaction. Its smgr_owner pointer ends up
pointing to already-freed memory.
The original reason for using a fake relcache entry here was to try
to avoid reusing an SMgrRelation across a relevant invalidation. To
avoid that problem, just call smgropen() again each time we need a
reference to it. Hopefully someday we will come up with a more
elegant approach, but accessing uninitialized memory is bad so let's
do this for now.
Dilip Kumar, reviewed by Andres Freund and Tom Lane. Report by
Justin Pryzby.
Discussion: http://postgr.es/m/20220802175043.GA13682@telsasoft.com
Discussion: http://postgr.es/m/CAFiTN-vSFeE6_W9z698XNtFROOA_nSqUXWqLcG0emob_kJ+dEQ@mail.gmail.com
The grammar added for MERGE inadvertently made it accepted syntax in
places that were not prepared to deal with it -- namely COPY and inside
CTEs, but invoking these things with MERGE currently causes assertion
failures or weird misbehavior in non-assertion builds. Protect those
places by checking for it explicitly until somebody decides to implement
it.
Reported-by: Alexey Borzov <borz_off@cs.msu.su>
Discussion: https://postgr.es/m/17579-82482cd7b267b862@postgresql.org
Previously, if an extension script did CREATE OR REPLACE and there was
an existing object not belonging to the extension, it would overwrite
the object and adopt it into the extension. This is problematic, first
because the overwrite is probably unintentional, and second because we
didn't change the object's ownership. Thus a hostile user could create
an object in advance of an expected CREATE EXTENSION command, and would
then have ownership rights on an extension object, which could be
modified for trojan-horse-type attacks.
Hence, forbid CREATE OR REPLACE of an existing object unless it already
belongs to the extension. (Note that we've always forbidden replacing
an object that belongs to some other extension; only the behavior for
previously-free-standing objects changes here.)
For the same reason, also fail CREATE IF NOT EXISTS when there is
an existing object that doesn't belong to the extension.
Our thanks to Sven Klemm for reporting this problem.
Security: CVE-2022-2625
Now that lstat() reports junction points with S_IFLNK/S_ISLINK(), and
unlink() can unlink them, there is no need for conditional code for
Windows in a few places. That was expressed by testing for WIN32 or
S_ISLNK, which we can now constant-fold.
The coding around pgwin32_is_junction() was a bit suspect anyway, as we
never checked for errors, and we also know that errors can be spuriously
reported because of transient sharing violations on this OS. The
lstat()-based code has handling for that.
This also reverts 4fc6b6ee on master only. That was done because
lstat() didn't previously work for symlinks (junction points), but now
it does.
Tested-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/CA%2BhUKGLfOOeyZpm5ByVcAt7x5Pn-%3DxGRNCvgiUPVVzjFLtnY0w%40mail.gmail.com
Using ATSimpleRecursion() in ATPrepCmd() to do so as bbb927b4db did is
not correct, because ATPrepCmd() can't distinguish between triggers that
may be cloned and those that may not, so would wrongly try to recurse
for the latter category of triggers.
So this commit restores the code in EnableDisableTrigger() that
86f575948c had added to do the recursion, which would do it only for
triggers that may be cloned, that is, row-level triggers. This also
changes tablecmds.c such that ATExecCmd() is able to pass the value of
ONLY flag down to EnableDisableTrigger() using its new 'recurse'
parameter.
This also fixes what seems like an oversight of 86f575948c that the
recursion to partition triggers would only occur if EnableDisableTrigger()
had actually changed the trigger. It is more apt to recurse to inspect
partition triggers even if the parent's trigger didn't need to be
changed: only then can we be certain that all descendants share the same
state afterwards.
Backpatch all the way back to 11, like bbb927b4db. Care is taken not
to break ABI compatibility (and that no catversion bump is needed.)
Co-authored-by: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Dmitry Koval <d.koval@postgrespro.ru>
Discussion: https://postgr.es/m/CA+HiwqG-cZT3XzGAnEgZQLoQbyfJApVwOTQaCaas1mhpf+4V5A@mail.gmail.com
symlink() and readlink() are in SUSv2 and all targeted Unix systems have
them. We have partial emulation on Windows. Code that raised runtime
errors on systems without it has been dead for years, so we can remove
that and also references to such systems in the documentation.
Define HAVE_READLINK and HAVE_SYMLINK macros on Unix. Our Windows
replacement functions based on junction points can't be used for
relative paths or for non-directories, so the macros can be used to
check for full symlink support. The places that deal with tablespaces
can just use symlink functions without checking the macros. (If they
did check the macros, they'd need to provide an #else branch with a
runtime or compile time error, and it'd be dead code.)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
These flavors of ALTER TABLE were already shaped to report the
ObjectAddress of the partition attached or detached, but this data was
not added to what is collected for event triggers. The tests of
test_ddl_deparse are updated to show the modification in the data
reported.
Author: Hou Zhijie
Reviewed-by: Álvaro Herrera, Amit Kapila, Hayato Kuroda, Michael Paquier
Discussion: https://postgr.es/m/OS0PR01MB571626984BD099DADF53F38394899@OS0PR01MB5716.jpnprd01.prod.outlook.com
Commit 9a974cbcba arranged to preserve
the relfilenode of user tables across pg_upgrade, but failed to notice
that pg_upgrade treats pg_largeobject as a user table and thus it needs
the same treatment. Otherwise, large objects will appear to vanish
after a pg_upgrade.
Commit d498e052b4 fixed this problem
by teaching pg_dump to UPDATE pg_class.relfilenode for pg_largeobject
and its index. However, because an UPDATE on the catalog rows doesn't
change anything on disk, this can leave stray files behind in the new
cluster. They will normally be empty, but it's a little bit untidy.
Hence, this commit arranges to do the same thing using DDL. Specifically,
it makes TRUNCATE work for the pg_largeobject catalog when in
binary-upgrade mode, and it then uses that command in binary-upgrade
dumps as a way of setting pg_class.relfilenode for pg_largeobject and
its index. That way, the old files are removed from the new cluster.
Discussion: http://postgr.es/m/CA+TgmoYYMXGUJO5GZk1-MByJGu_bB8CbOL6GJQC8=Bzt6x6vDg@mail.gmail.com
Commit b0a55e4329 missed a few places
where we are referring to the number used as a part of the relation
filename as an "OID". We now want to call that a "RelFileNumber".
Some of these places actually made it sound like the OID in question
is pg_class.oid rather than pg_class.relfilenode, which is especially
good to clean up.
Dilip Kumar with some editing by me.
Crash recovery on standby may encounter missing directories
when replaying database-creation WAL records. Prior to this
patch, the standby would fail to recover in such a case;
however, the directories could be legitimately missing.
Consider the following sequence of commands:
CREATE DATABASE
DROP DATABASE
DROP TABLESPACE
If, after replaying the last WAL record and removing the
tablespace directory, the standby crashes and has to replay the
create database record again, crash recovery must be able to continue.
A fix for this problem was already attempted in 49d9cfc68b, but it
was reverted because of design issues. This new version is based
on Robert Haas' proposal: any missing tablespaces are created
during recovery before reaching consistency. Tablespaces
are created as real directories, and should be deleted
by later replay. CheckRecoveryConsistency ensures
they have disappeared.
The problems detected by this new code are reported as PANIC,
except when allow_in_place_tablespaces is set to ON, in which
case they are WARNING. Apart from making tests possible, this
gives users an escape hatch in case things don't go as planned.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Asim R Praveen <apraveen@pivotal.io>
Author: Paul Guo <paulguo@gmail.com>
Reviewed-by: Anastasia Lubennikova <lubennikovaav@gmail.com> (older versions)
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com> (older versions)
Reviewed-by: Michaël Paquier <michael@paquier.xyz>
Diagnosed-by: Paul Guo <paulguo@gmail.com>
Discussion: https://postgr.es/m/CAEET0ZGx9AvioViLf7nbR_8tH9-=27DN5xWJ2P9-ROH16e4JUA@mail.gmail.com
GetSubscriptionRelations() and GetSubscriptionNotReadyRelations() share
mostly the same code, which scans pg_subscription_rel and fetches all
the relations of a given subscription. The only difference is that the
second routine looks for all the relations not in a ready state. This
commit refactors the code to use a single routine, shaving a bit of
code.
Author: Vignesh C
Reviewed-By: Kyotaro Horiguchi, Amit Kapila, Michael Paquier, Peter
Smith
Discussion: https://postgr.es/m/CALDaNm0eW-9g4G_EzHebnFT5zZoasWCS_EzZQ5BgnLZny9S=pg@mail.gmail.com
The BoolGetDatum() call ended up in the wrong place. It should be
applied when we, err, want to convert a bool to a datum.
Thanks to Tom Lane for noticing this.
Discussion: http://postgr.es/m/2511599.1658861964@sss.pgh.pa.us
A bootstrap user who is not a superuser will still own many
important system objects, such as the pg_catalog schema, that
will likely allow that user to regain superuser status. Therefore,
allowing the superuser property to be removed from the superuser
creates a false perception of security where none exists.
Although removing superuser from the bootstrap user is also a bad idea
and should be considered unsupported in all released versions, no
back-patch, as this is a behavior change.
Discussion: http://postgr.es/m/CA+TgmoZirCwArJms_fgvLBFrC6b=HdxmG7iAhv+kt_=NBA7tEw@mail.gmail.com
This allows users to omit the statistics name in a CREATE STATISTICS
command, letting the system auto-generate a sensible, unique name,
putting the statistics object in the same schema as the table.
Simon Riggs, reviewed by Matthias van de Meent.
Discussion: https://postgr.es/m/CANbhV-FGD2d_C3zFTfT2aRfX_TaPSgOeKES58RLZx5XzQp5NhA@mail.gmail.com
This patch adds a new SUBSCRIPTION parameter "origin". It specifies
whether the subscription will request the publisher to only send changes
that don't have an origin or send changes regardless of origin. Setting it
to "none" means that the subscription will request the publisher to only
send changes that have no origin associated. Setting it to "any" means
that the publisher sends changes regardless of their origin. The default
is "any".
Usage:
CREATE SUBSCRIPTION sub1 CONNECTION 'dbname=postgres port=9999'
PUBLICATION pub1 WITH (origin = none);
This can be used to avoid loops (infinite replication of the same data)
among replication nodes.
This feature allows filtering only the replication data originating from
WAL but for initial sync (initial copy of table data) we don't have such a
facility as we can only distinguish the data based on origin from WAL. As
a follow-up patch, we are planning to forbid the initial sync if the
origin is specified as none and we notice that the publication tables were
also replicated from other publishers to avoid duplicate data or loops.
We forbid to allow creating origin with names 'none' and 'any' to avoid
confusion with the same name options.
Author: Vignesh C, Amit Kapila
Reviewed-By: Peter Smith, Amit Kapila, Dilip Kumar, Shi yu, Ashutosh Bapat, Hayato Kuroda
Discussion: https://postgr.es/m/CALDaNm0gwjY_4HFxvvty01BOT01q_fJLKQ3pWP9=9orqubhjcQ@mail.gmail.com
Detail and hint messages should be full sentences and should end with a
period, but some of the messages newly-introduced in v15 did not follow
that.
Author: Justin Pryzby
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20220719120948.GF12702@telsasoft.com
Backpatch-through: 15
We allow users to set the values of not-yet-loaded extension GUCs,
remembering those values in "placeholder" GUC entries. When/if
the extension is loaded later in the session, we need to verify that
the user had permissions to set the GUC. That was done correctly
before commit a0ffa885e, but as of that commit, we'd check the
permissions of the active role when the LOAD happens, not the role
that had set the value. (This'd be a security bug if it had made it
into a released version.)
In principle this is simple enough to fix: we just need to remember
the exact role OID that set each GUC value, and use that not
GetUserID() when verifying permissions. Maintaining that data in
the guc.c data structures is slightly tedious, but fortunately it's
all basically just copy-n-paste of the logic for tracking the
GucSource of each setting, as we were already doing.
Another oversight is that validate_option_array_item() hadn't
been taught to check for granted GUC privileges. This appears
to manifest only in that ALTER ROLE/DATABASE RESET ALL will
fail to reset settings that the user should be allowed to reset.
Patch by myself and Nathan Bossart, per report from Nathan Bossart.
Back-patch to v15 where the faulty code came in.
Discussion: https://postgr.es/m/20220706224727.GA2158260@nathanxps13
Per discussion, this commit includes a couple of changes to these two
flavors of REINDEX:
* The grammar is changed to make the name of the object optional, hence
one can rebuild all the indexes of the wanted area by specifying only
"REINDEX DATABASE;" or "REINDEX SYSTEM;". Previously, the object name
was mandatory and had to match the name of the database on which the
command is issued.
* REINDEX DATABASE is changed to ignore catalogs, making this task only
possible with REINDEX SYSTEM. This is a historical change, but there
was no way to work only on the indexes of a database without touching
the catalogs. We have discussed more approaches here, like the addition
of an option to skip the catalogs without changing the original
behavior, but concluded that what we have here is for the best.
This builds on top of the TAP tests introduced in 5fb5b6c, showing the
change in behavior for REINDEX SYSTEM. reindexdb is updated so as we do
not issue an extra REINDEX SYSTEM when working on a database in the
non-concurrent case, something that was confusing when --concurrently
got introduced, so this simplifies the code.
Author: Simon Riggs
Reviewed-by: Ashutosh Bapat, Bernd Helmle, Álvaro Herrera, Cary Huang,
Michael Paquier
Discussion: https://postgr.es/m/CANbhV-H=NH6Om4-X6cRjDWfH_Mu1usqwkuYVp-hwdB_PSHWRfg@mail.gmail.com
This replaces all MemSet() calls with struct initialization where that
is easily and obviously possible. (For example, some cases have to
worry about padding bits, so I left those.)
(The same could be done with appropriate memset() calls, but this
patch is part of an effort to phase out MemSet(), so it doesn't touch
memset() calls.)
Reviewed-by: Ranier Vilela <ranier.vf@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/9847b13c-b785-f4e2-75c3-12ec77a3b05c@enterprisedb.com
Previously, the STORAGE specification was only available in ALTER
TABLE. This makes it available in CREATE TABLE as well.
Also make the code and the documentation for STORAGE and COMPRESSION
attributes consistent.
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: wenjing zeng <wjzeng2012@gmail.com>
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/de83407a-ae3d-a8e1-a788-920eb334f25b@sigaev.ru
Truncating off the end of a freshly copied List is not a very efficient
way of copying the first N elements of a List.
In many of the cases that are updated here, the pattern was only being
used to remove the final element of a List. That's about the best case
for it, but there were many instances where the truncate trimming the List
down much further.
4cc832f94 added list_copy_head(), so let's use it in cases where it's
useful.
Author: David Rowley
Discussion: https://postgr.es/m/1986787.1657666922%40sss.pgh.pa.us
Justin Pryzby reported that some scenarios could cause gathering
of extended statistics to spend many seconds in an un-cancelable
qsort() operation. To fix, invent qsort_interruptible(), which is
just like qsort_arg() except that it will also do CHECK_FOR_INTERRUPTS
every so often. This bloats the backend by a couple of kB, which
seems like a good investment. (We considered just enabling
CHECK_FOR_INTERRUPTS in the existing qsort and qsort_arg functions,
but there are some callers for which that'd demonstrably be unsafe.
Opt-in seems like a better way.)
For now, just apply qsort_interruptible() in statistics collection.
There's probably more places where it could be useful, but we can
always change other call sites as we find problems.
Back-patch to v14. Before that we didn't have extended stats on
expressions, so that the problem was less severe. Also, this patch
depends on the sort_template infrastructure introduced in v14.
Tom Lane and Justin Pryzby
Discussion: https://postgr.es/m/20220509000108.GQ28830@telsasoft.com
Now some foreign data wrappers support TRUNCATE command.
So it's useful to support TRUNCATE triggers on foreign tables for
audit logging or for preventing undesired truncation.
Author: Yugo Nagata
Reviewed-by: Fujii Masao, Ian Lawrence Barwick
Discussion: https://postgr.es/m/20220630193848.5b02e0d6076b86617a915682@sraoss.co.jp
The original comments mentioned a "parameter" as something not defined
in a fast-exit path to assume a true status. This is rather confusing
as the parameter DefElem is defined, and the intention is to check if
its value is defined. This improves both comments to mention the value
assigned to the DefElem's value instead, so as future patches are able
to catch the tweak if this code pattern gets copied around more.
Author: Peter Smith
Discussion: https://postgr.es/m/CAHut+Pv0yWynWTmp4o34s0d98xVubys9fy=p0YXsZ5_sUcNnMw@mail.gmail.com
There's no reason anymore to only drop subscription stats if associated with a
slot, now that stats drops are transactional. And since there's now no other
cleanup of stats, this would lead to stats for slot-less subscriptions to get
leaked (however most slot-less subs won't have stats).
Additionally, the comment referring to autovacuum cleaning up stats was
clearly outdated.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoAwiby3HeJE7vJe16Gr75RFfJ640dyHqvsiUhyKJTXPtw@mail.gmail.com
Backpatch: 15-
We have been using the term RelFileNode to refer to either (1) the
integer that is used to name the sequence of files for a certain relation
within the directory set aside for that tablespace/database combination;
or (2) that value plus the OIDs of the tablespace and database; or
occasionally (3) the whole series of files created for a relation
based on those values. Using the same name for more than one thing is
confusing.
Replace RelFileNode with RelFileNumber when we're talking about just the
single number, i.e. (1) from above, and with RelFileLocator when we're
talking about all the things that are needed to locate a relation's files
on disk, i.e. (2) from above. In the places where we refer to (3) as
a relfilenode, instead refer to "relation storage".
Since there is a ton of SQL code in the world that knows about
pg_class.relfilenode, don't change the name of that column, or of other
SQL-facing things that derive their name from it.
On the other hand, do adjust closely-related internal terminology. For
example, the structure member names dbNode and spcNode appear to be
derived from the fact that the structure itself was called RelFileNode,
so change those to dbOid and spcOid. Likewise, various variables with
names like rnode and relnode get renamed appropriately, according to
how they're being used in context.
Hopefully, this is clearer than before. It is also preparation for
future patches that intend to widen the relfilenumber fields from its
current width of 32 bits. Variables that store a relfilenumber are now
declared as type RelFileNumber rather than type Oid; right now, these
are the same, but that can now more easily be changed.
Dilip Kumar, per an idea from me. Reviewed also by Andres Freund.
I fixed some whitespace issues, changed a couple of words in a
comment, and made one other minor correction.
Discussion: http://postgr.es/m/CA+TgmoamOtXbVAQf9hWFzonUo6bhhjS6toZQd7HZ-pmojtAmag@mail.gmail.com
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Discussion: http://postgr.es/m/CAFiTN-vTe79M8uDH1yprOU64MNFE+R3ODRuA+JWf27JbhY4hJw@mail.gmail.com
auto_explain.log_parameter_max_length is a new GUC part of the
extension, similar to the corresponding core setting, that controls the
inclusion of query parameters in the logged explain output.
More tests are added to check the behavior of this new parameter: when
parameters logged in full (the default of -1), when disabled (value of
0) and when partially truncated (value different than the two others).
Author: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/87ee09mohb.fsf@wibble.ilmari.org
Amendment to 84ad713cf85aeffee5dd39f62d49a1b9e34632da: Not all
prepared statements have a result descriptor. As currently coded,
this would crash when reading pg_prepared_statements. Make those
cases return null for result_types instead. Also add a test case for
it.
There were many calls to construct_array() and deconstruct_array() for
built-in types, for example, when dealing with system catalog columns.
These all hardcoded the type attributes necessary to pass to these
functions.
To simplify this a bit, add construct_array_builtin(),
deconstruct_array_builtin() as wrappers that centralize this hardcoded
knowledge. This simplifies many call sites and reduces the amount of
hardcoded stuff that is spread around.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/2914356f-9e5f-8c59-2995-5997fc48bcba%40enterprisedb.com
Commit a117cebd63 used the original userid
for ACL checks located directly in DefineIndex(), but it still adopted
the table owner userid for more ACL checks than intended. That broke
dump/reload of indexes that refer to an operator class, collation, or
exclusion operator in a schema other than "public" or "pg_catalog".
Back-patch to v10 (all supported versions), like the earlier commit.
Nathan Bossart and Noah Misch
Discussion: https://postgr.es/m/f8a4105f076544c180a87ef0c4822352@stmuk.bayern.de
072132f0 used the attnum offset to access the raw_fields array when
checking that the attribute names of the header and of the relation
match, leading to incorrect results or even crashes if the attribute
numbers of a relation are changed, like on a dropped attribute. This
fixes the logic to use the correct attribute names for the header
matching requirements.
Also, this commit disallows HEADER MATCH in COPY TO as there is no
validation that can be done in this case.
The tests are expanded for HEADER MATCH with COPY FROM and dropped
columns, with cases where a relation has a dropped and re-added column,
as well as a reduced set of columns.
Author: Julien Rouhaud
Reviewed-by: Peter Eisentraut, Michael Paquier
Discussion: https://postgr.es/m/20220607154744.vvmitnqhyxrne5ms@jrouhaud
Currently, we simply combine the column lists when publishing tables on
multiple publications and that can sometimes lead to unexpected behavior.
Say, if a column is published in any row-filtered publication, then the
values for that column are sent to the subscriber even for rows that don't
match the row filter, as long as the row matches the row filter for any
other publication, even if that other publication doesn't include the
column.
The main purpose of introducing a column list is to have statically
different shapes on publisher and subscriber or hide sensitive column
data. In both cases, it doesn't seem to make sense to combine column
lists.
So, we disallow the cases where the column list is different for the same
table when combining publications. It can be later extended to combine the
column lists for selective cases where required.
Reported-by: Alvaro Herrera
Author: Hou Zhijie
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/202204251548.mudq7jbqnh7r@alvherre.pgsql
In the codepath when no encoding conversion is required, the check for
incomplete character at the end of input incorrectly used server
encoding's max character length, instead of the client's. Usually the
server and client encodings are the same when we're not performing
encoding conversion, but SQL_ASCII is an exception.
In the passing, also fix some outdated comments that still talked about
the old COPY protocol. It was removed in v14.
Per bug #17501 from Vitaly Voronov. Backpatch to v14 where this was
introduced.
Discussion: https://www.postgresql.org/message-id/17501-128b1dd039362ae6@postgresql.org
When an implicit operator family is created, it wasn't getting reported.
Make it do so.
This has always been missing. Backpatch to 10.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reported-by: Leslie LEMAIRE <leslie.lemaire@developpement-durable.gouv.fr>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Michael Paquiër <michael@paquier.xyz>
Discussion: https://postgr.es/m/f74d69e151b22171e8829551b1159e77@developpement-durable.gouv.fr
We can use a single line to print all tuple counts that MERGE processed,
for conciseness, and elide those that are zeroes. Non-text formats
report all numbers, as is typical.
Per comment from Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20220511163350.GL19626@telsasoft.com
A few places used binary_upgrade_* variables without including the header,
which worked without warnings because the variables are defined in those
places. However that can cause linker complaints with MSVC - except that we
don't see them right now, due to the use of a symbol export file.
Discussion: https://postgr.es/m/20220512164513.vaheofqp2q24l65r@alap3.anarazel.de
It intended to, but did not, achieve this. Adopt the new standard of
setting user ID just after locking the relation. Back-patch to v10 (all
supported versions).
Reviewed by Simon Riggs. Reported by Alvaro Herrera.
Security: CVE-2022-1552
When a feature enumerates relations and runs functions associated with
all found relations, the feature's user shall not need to trust every
user having permission to create objects. BRIN-specific functionality
in autovacuum neglected to account for this, as did pg_amcheck and
CLUSTER. An attacker having permission to create non-temp objects in at
least one schema could execute arbitrary SQL functions under the
identity of the bootstrap superuser. CREATE INDEX (not a
relation-enumerating operation) and REINDEX protected themselves too
late. This change extends to the non-enumerating amcheck interface.
Back-patch to v10 (all supported versions).
Sergey Shinderuk, reviewed (in earlier versions) by Alexander Lakhin.
Reported by Alexander Lakhin.
Security: CVE-2022-1552
Commits 4eb21763 and b74e94dc introduced a way to force every backend to
close all relation files, to fix an ancient Windows-only bug.
This commit extends that behavior to all operating systems and adds
a couple of extra barrier points, to fix a totally different class of
bug: the reuse of relfilenodes in scenarios that have no other kind of
cache invalidation to prevent file descriptor mix-ups.
In all releases, data corruption could occur when you moved a database
to another tablespace and then back again. Despite that, no back-patch
for now as the infrastructure required is too new and invasive. In
master only, since commit aa010514, it could also happen when using
CREATE DATABASE with a user-supplied OID or via pg_upgrade.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220209220004.kb3dgtn2x2k2gtdm%40alap3.anarazel.de
Several places didn't do it, and in many cases it didn't matter because
it would be a small allocation in a short-lived context; but other
places may accumulate a few (for example, in CreateDatabaseUsingFileCopy,
one per tablespace). In most databases this is highly unlikely to be
very serious either, but it seems better to make the code consistent in
case there's future copy-and-paste.
The only case of actual concern seems to be the aforementioned routine,
which is new with commit 9c08aea6a3, so there's no need to backpatch.
As pointed out by Coverity.
An ALTER FUNCTION command that tried to update both the function's
proparallel property and its proconfig list failed to do the former,
because it stored the new proparallel value into a tuple that was
no longer the interesting one. Carelessness in 7aea8e4f2.
(I did not bother with a regression test, because the only likely
future breakage would be for someone to ignore the comment I added
and add some other field update after the heap_modify_tuple step.
A test using existing function properties could not catch that.)
Per report from Bryn Llewellyn. Back-patch to all supported branches.
Discussion: https://postgr.es/m/8AC9A37F-99BD-446F-A2F7-B89AD0022774@yugabyte.com
If a partitioned table has partitions owned by roles other than the
owner of the partitioned table, don't include them in the to-be-
clustered list. This is similar to what VACUUM FULL does (except we do
it sooner, because there is no reason to postpone it). Add a simple
test to verify that only owned partitions are clustered.
While at it, change memory context switch-and-back to occur once per
partition instead of outside of the loop.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20220411140609.GF26620@telsasoft.com
Michael Paquier
Thomas Munro
Nathan Bossart
Masahiko Sawada
Tomas Vondra
Peter Eisentraut
Amit Kapila
Jeff Davis
Tom Lane
Alexander Korotkov
Noah Misch
David Rowley
Alvaro Herrera
Daniel Gustafsson
Andres Freund
Robert Haas
Peter Geoghegan
Andrew Dunstan
Dean Rasheed
Bruce Momjian
Etsuro Fujita
John Naylor
Fujii Masao
Heikki Linnakangas