These changes should generally improve correctness/maintainability.
A nice side benefit is that several kilobytes move from initialized
data to text segment, allowing them to be shared across processes and
probably reducing copy-on-write overhead while forking a new backend.
Unfortunately this doesn't seem to help libpq in the same way (at least
not when it's compiled with -fpic on x86_64), but we can hope the linker
at least collects all nominally-const data together even if it's not
actually part of the text segment.
Also, make pg_encname_tbl[] static in encnames.c, since there seems
no very good reason for any other code to use it; per a suggestion
from Wim Lewis, who independently submitted a patch that was mostly
a subset of this one.
Oskari Saarenmaa, with some editorialization by me
The psql Makefile was not creating $(datadir) before installing
psqlrc.sample there.
In most cases, the directory would be created in some other way, but for
the documented from-source client-only installation procedure, it could
fail.
Reported-by: Mike Blackwell <mike.blackwell@rrd.com>
Expand the messages when log_connections is enabled to include the
fact that SSL is used and the SSL cipher information.
Dr. Andreas Kunert, review by Marko Kreen
_WIN32 is set by the compiler, whereas our code uses WIN32 that is
normally set through our build system. To make it possible to build
extensions out of tree we cannot rely on that, so set the WIN32
symbol explicitly whenever the compiler has set _WIN32.
Not setting this symbol causes double inclusion of pg_config_os.h,
and possibly other errors as well.
Craig Ringer
Commit 6f60fdd701 accidentally removed a
call to XLogWalRcvSendHSFeedback() after flushing received WAL to disk.
The consequence is that when walsender is busy streaming WAL, it doesn't
send HS feedback messages. One is sent if nothing is received from the
master for 100ms, but if there's a steady stream of WAL, it never happens.
Backpatch to 9.3.
Andres Freund and Amit Kapila
Split the rather long ecpg_execute() function into ecpg_build_params(),
ecpg_autostart_transaction(), a smaller ecpg_execute() and
ecpg_process_output(). There is no user-visible change here, only code
reorganization to support future patches.
Author: Zoltán Böszörményi
Reviewed by Antonin Houska. Larger, older versions of this patch were
reviewed by Noah Misch and Michael Meskes.
The + modifier of \do didn't use to do anything, but now it adds an oprcode
column. This is useful both as an additional form of documentation of what
the operator does, and to save a step when finding out properties of the
underlying function.
Marko Tiikkaja, reviewed by Rushabh Lathia, adjusted a bit by me
This splits ECPGdo() into ecpg_prologue(), ecpg_do() and
ecpg_epilogue(), and renames free_params() into ecpg_free_params() and
exports it. This makes it possible for future code to use these
routines for their own purposes.
There is no user-visible functionality change here, only code
reorganization.
Zoltán Böszörményi
Reviewed by Antonin Houska. Larger, older versions of this patch were
reviewed by Noah Misch and Michael Meskes.
Coverity is complaining that the value returned by pg_strtok in
READ_LOCATION_FIELD and READ_BITMAPSET_FIELD macros is not used. In commit
39bfc94c86, we did this to the other macros
to placate compilers that complained when the variable was completely
unused, this extends that to the last remaining macros.
Previously, we did this just once per checkpoint, but that could make
Hot Standby take a long time to initialize. To avoid busying an
otherwise-idle system, we don't do this if no WAL has been written
since we did it last.
Andres Freund
Primarily, explain where to find the system-wide psqlrc file, per recent
gripe from John Sutton. Do some general wordsmithing and improve the
markup, too.
Also adjust psqlrc.sample so its comments about file location are somewhat
trustworthy. (Not sure why we bother with this file when it's empty,
but whatever.)
Back-patch to 9.2 where the startup file naming scheme was last changed.
In ordinary operation, VACUUM must be careful to take a cleanup lock on
each leaf page of a btree index; this ensures that no indexscans could
still be "in flight" to heap tuples due to be deleted. (Because of
possible index-tuple motion due to concurrent page splits, it's not enough
to lock only the pages we're deleting index tuples from.) In Hot Standby,
the WAL replay process must likewise lock every leaf page. There were
several bugs in the code for that:
* The replay scan might come across unused, all-zero pages in the index.
While btree_xlog_vacuum itself did the right thing (ie, nothing) with
such pages, xlogutils.c supposed that such pages must be corrupt and
would throw an error. This accounts for various reports of replication
failures with "PANIC: WAL contains references to invalid pages". To
fix, add a ReadBufferMode value that instructs XLogReadBufferExtended
not to complain when we're doing this.
* btree_xlog_vacuum performed the extra locking if standbyState ==
STANDBY_SNAPSHOT_READY, but that's not the correct test: we won't open up
for hot standby queries until the database has reached consistency, and
we don't want to do the extra locking till then either, for fear of reading
corrupted pages (which bufmgr.c would complain about). Fix by exporting a
new function from xlog.c that will report whether we're actually in hot
standby replay mode.
* To ensure full coverage of the index in the replay scan, btvacuumscan
would emit a dummy WAL record for the last page of the index, if no
vacuuming work had been done on that page. However, if the last page
of the index is all-zero, that would result in corruption of said page,
since the functions called on it weren't prepared to handle that case.
There's no need to lock any such pages, so change the logic to target
the last normal leaf page instead.
The first two of these bugs were diagnosed by Andres Freund, the other one
by me. Fixes based on ideas from Heikki Linnakangas and myself.
This has been wrong since Hot Standby was introduced, so back-patch to 9.0.
This code provides infrastructure for user backends to communicate
relatively easily with background workers. The message queue is
structured as a ring buffer and allows messages of arbitary length
to be sent and received.
Patch by me. Review by KaiGai Kohei and Andres Freund.
This interface is intended to make it simple to divide a dynamic shared
memory segment into different regions with distinct purposes. It
therefore serves much the same purpose that ShmemIndex accomplishes for
the main shared memory segment, but it is intended to be more
lightweight.
Patch by me. Review by Andres Freund.
Move FreeConfigVariables() later to make sure ErrorConfFile is valid
when we use it, and get rid of an unnecessary string copy operation.
Amit Kapila, kibitzed by me.
On second thought, commit 0c051c9008 was
over-hasty: rather than allowing this case, we ought to reject it for now.
That leaves the field clear for a future feature that allows the target
table to be re-specified in the FROM (or USING) clause, which will enable
left-joining the target table to something else. We can then also allow
LATERAL references to such an explicitly re-specified target table.
But allowing them right now will create ambiguities or worse for such a
feature, and it isn't something we documented 9.3 as supporting.
While at it, add a convenience subroutine to avoid having several copies
of the ereport for disalllowed-LATERAL-reference cases.
Per reports from Andres Freund and Luke Campbell, a server failure during
set_pglocale_pgservice results in a segfault rather than a useful error
message, because the infrastructure needed to use ereport hasn't been
initialized; specifically, MemoryContextInit hasn't been called.
One known cause of this is starting the server in a directory it
doesn't have permission to read.
We could try to prevent set_pglocale_pgservice from using anything that
depends on palloc or elog, but that would be messy, and the odds of future
breakage seem high. Moreover there are other things being called in main.c
that look likely to use palloc or elog too --- perhaps those things
shouldn't be there, but they are there today. The best solution seems to
be to move the call of MemoryContextInit to very early in the backend's
real main() function. I've verified that an elog or ereport occurring
immediately after that is now capable of sending something useful to
stderr.
I also added code to elog.c to print something intelligible rather than
just crashing if MemoryContextInit hasn't created the ErrorContext.
This could happen if MemoryContextInit itself fails (due to malloc
failure), and provides some future-proofing against someone trying to
sneak in new code even earlier in server startup.
Back-patch to all supported branches. Since we've only heard reports of
this type of failure recently, it may be that some recent change has made
it more likely to see a crash of this kind; but it sure looks like it's
broken all the way back.
The standard typanalyze functions skip over values whose detoasted size
exceeds WIDTH_THRESHOLD (1024 bytes), so as to limit memory bloat during
ANALYZE. However, we (I think I, actually :-() failed to consider the
possibility that *every* non-null value in a column is too wide. While
compute_minimal_stats() seems to behave reasonably anyway in such a case,
compute_scalar_stats() just fell through and generated no pg_statistic
entry at all. That's unnecessarily pessimistic: we can still produce
valid stanullfrac and stawidth values in such cases, since we do include
too-wide values in the average-width calculation. Furthermore, since the
general assumption in this code is that too-wide values are probably all
distinct from each other, it seems reasonable to set stadistinct to -1
("all distinct").
Per complaint from Kadri Raudsepp. This has been like this since roughly
neolithic times, so back-patch to all supported branches.
Add a query that lists all the functions that are operator implementation
functions and have a SQL comment that doesn't just say "implementation of
XYZ operator". (Note that the preceding test checks that such functions'
comments exactly match the corresponding operators' comments.)
While it's not forbidden to add more functions to this list, that should
only be done when we're encouraging users to use either the function or
operator syntax for the functionality, which is a fairly rare situation.
The new MultiXact freezing routines introduced by commit 8e9a16ab8f
neglected to consider tuples that came from a pg_upgrade'd database; a
vacuum run that tried to freeze such tuples would die with an error such
as
ERROR: MultiXactId 11415437 does no longer exist -- apparent wraparound
To fix, ensure that GetMultiXactIdMembers is allowed to return empty
multis when the infomask bits are right, as is done in other callsites.
Per trouble report from F-Secure.
In passing, fix a copy&paste bug reported by Andrey Karpov from VIVA64
from their PVS-Studio static checked, that instead of setting relminmxid
to Invalid, we were setting relfrozenxid twice. Not an important
mistake because that code branch is about relations for which we don't
use the frozenxid/minmxid values at all in the first place, but seems to
warrants a fix nonetheless.
Buildfarm member dunlin has been crashing since commit 8b49a60, but other
machines seem fine with that code. It turns out that removing the local
variables in ordered_set_startup() that are copies of fields in "qstate"
dodges the problem. This might cost a few cycles on register-rich
machines, but it's probably a wash on others, and in any case this code
isn't performance-critical. Thanks to Jeremy Drake for off-list
investigation.
While working on most platforms the old way sometimes created alignment
problems. This should fix it. Also the regresion tests were updated to test for
the reported case.
Report and fix by MauMau <maumau307@gmail.com>
Makes the replay loop slightly more readable, by separating the concerns of
whether to stop and whether to delay, and how to extract the timestamp from
a record.
This has the user-visible change that the timestamp of the last applied
record is now updated after actually applying it. Before, it was updated
just before applying it. That meant that pg_last_xact_replay_timestamp()
could return the timestamp of a commit record that is in process of being
replayed, but not yet applied. Normally the difference is small, but if
min_recovery_apply_delay is set, there could be a significant delay between
reading a record and applying it.
Another behavioral change is that if you recover to a restore point, we stop
after the restore point record, not before it. It makes no difference as far
as running queries on the server is concerned, as applying a restore point
record changes nothing, but if examine the timeline history you will see
that the new timeline branched off just after the restore point record, not
before it. One practical consequence is that if you do PITR to the new
timeline, and set recovery target to the same named restore point again, it
will find and stop recovery at the same restore point. Conceptually, I think
it makes more sense to consider the restore point as part of the new
timeline's history than not.
In principle, setting the last-replayed timestamp before actually applying
the record was a bug all along, but it doesn't seem worth the risk to
backpatch, since min_recovery_apply_delay was only added in 9.4.
Minor improvement to commit daa7527afc2274432094ebe7ceb03aa41f916607:
s_lock.h no longer has any need to mention PGSemaphoreData, so we can
rip out the #include that supplies that. In a non-HAVE_SPINLOCKS
build, this doesn't really buy much since we still need the #include
in spin.h --- but everywhere else, this reduces #include footprint by
some trifle, and helps keep the different locking facilities separate.
In commit c1352052ef, I implemented an
optimization that assumed that a function's argument expressions would
either always return a set (ie multiple rows), or always not. This is
wrong however: we allow CASE expressions in which some arms return a set
of some type and others just return a scalar of that type. There may be
other examples as well. To fix, replace the run-time test of whether an
argument returned a set with a static precheck (expression_returns_set).
This adds a little bit of query startup overhead, but it seems barely
measurable.
Per bug #8228 from David Johnston. This has been broken since 8.0,
so patch all supported branches.
Instead of allocating a semaphore from the operating system for every
spinlock, allocate a fixed number of semaphores (by default, 1024)
from the operating system and multiplex all the spinlocks that get
created onto them. This could self-deadlock if a process attempted
to acquire more than one spinlock at a time, but since processes
aren't supposed to execute anything other than short stretches of
straight-line code while holding a spinlock, that shouldn't happen.
One motivation for this change is that, with the introduction of
dynamic shared memory, it may be desirable to create spinlocks that
last for less than the lifetime of the server. Without this change,
attempting to use such facilities under --disable-spinlocks would
quickly exhaust any supply of available semaphores. Quite apart
from that, it's desirable to contain the quantity of semaphores
needed to run the server simply on convenience grounds, since using
too many may make it harder to get PostgreSQL running on a new
platform, which is mostly the point of --disable-spinlocks in the
first place.
Patch by me; review by Tom Lane.
If pause_at_recovery_target is set, recovery pauses *before* applying the
target record, even if recovery_target_inclusive is set. If you then
continue with pg_xlog_replay_resume(), it will apply the target record
before ending recovery. In other words, if you log in while it's paused
and verify that the database looks OK, ending recovery changes its state
again, possibly destroying data that you were tring to salvage with PITR.
Backpatch to 9.1, this has been broken since pause_at_recovery_target was
added.
The docs say that only one of recovery_target_xid, recovery_target_time, or
recovery_target_name can be specified. But the code actually did something
different, so that a name overrode time, and xid overrode both time and name.
Now the target specified last takes effect, whether it's an xid, time or
name.
With this patch, we still accept multiple recovery_target settings, even
though docs say that only one can be specified. It's a general property of
the recovery.conf file parser that you if you specify the same option twice,
the last one takes effect, like with postgresql.conf.
In the transition functions, we don't really need to recheck this after the
first call. I had been feeling paranoid about possibly getting a non-null
argument value in some other context; but it's probably game over anyway
if we have a non-null "internal" value that's not what we are expecting.
In the final functions, the general convention in pre-existing final
functions seems to be that an Assert() is good enough, so do it like that
here too.
This seems to save a few tenths of a percent of overall query runtime,
which isn't much, but still it's just overhead if there's not a plausible
case where the checks would fire.
Keep a pre-initialized FunctionCallInfoData in AggStatePerAggData, and
re-use that at each row instead of doing InitFunctionCallInfoData each
time. This saves only half a dozen assignments and maybe some stack
manipulation, and yet that seems to be good for a percent or two of the
overall query run time for simple aggregates such as count(*). The cost
is that the FunctionCallInfoData (which is about a kilobyte, on 64-bit
machines) stays allocated for the duration of the query instead of being
short-lived stack data. But we're already paying an equivalent space cost
for each regular FuncExpr or OpExpr node, so I don't feel bad about paying
it for aggregate functions. The code seems a little cleaner this way too,
since the number of things passed to advance_transition_function decreases.
When starting WAL replay from an online checkpoint, the last replayed WAL
record variable was initialized using the checkpoint record's location, even
though the records between the REDO location and the checkpoint record had
not been replayed yet. That was noted as "slightly confusing" but harmless
in the comment, but in some cases, it fooled CheckRecoveryConsistency to
incorrectly conclude that we had already reached a consistent state
immediately at the beginning of WAL replay. That caused the system to accept
read-only connections in hot standby mode too early, and also PANICs with
message "WAL contains references to invalid pages".
Fix by initializing the variables to the REDO location instead.
In 9.2 and above, change CheckRecoveryConsistency() to use
lastReplayedEndRecPtr variable when checking if backup end location has
been reached. It was inconsistently using EndRecPtr for that check, but
lastReplayedEndRecPtr when checking min recovery point. It made no
difference before this patch, because in all the places where
CheckRecoveryConsistency was called the two variables were the same, but
it was always an accident waiting to happen, and would have been wrong
after this patch anyway.
Report and analysis by Tomonari Katsumata, bug #8686. Backpatch to 9.0,
where hot standby was introduced.
I failed to think much about UPDATE/DELETE when implementing LATERAL :-(.
The implemented behavior ended up being that subqueries in the FROM or
USING clause (respectively) could access the update/delete target table as
though it were a lateral reference; which seems fine if they said LATERAL,
but certainly ought to draw an error if they didn't. Fix it so you get a
suitable error when you omit LATERAL. Per report from Emre Hasegeli.
And the same for do_pg_stop_backup. The code in do_pg_* is not allowed
to access the catalogs. For manual base backups, the permissions
check can be handled in the calling function, and for streaming
base backups only users with the required permissions can get past
the authentication step in the first place.
Reported by Antonin Houska, diagnosed by Andres Freund
If a tablespace was crated inside PGDATA it was backed up both as part
of the PGDATA backup and as the backup of the tablespace. Avoid this
by skipping any directory inside PGDATA that contains one of the active
tablespaces.
Dimitri Fontaine and Magnus Hagander
Tom Lane
Andrew Dunstan
Peter Eisentraut
Magnus Hagander
Bruce Momjian
Heikki Linnakangas
Alvaro Herrera
Robert Haas
Michael Meskes