This patch reverts commit 191ef2b407
and thereby restores the pre-7.3 behavior of EXTRACT(EPOCH FROM
timestamp-without-tz). Per discussion, the more recent behavior was
misguided on a couple of grounds: it makes it hard to get a
non-timezone-aware epoch value for a timestamp, and it makes this one
case dependent on the value of the timezone GUC, which is incompatible
with having timestamp_part() labeled as immutable.
The other behavior is still available (in all releases) by explicitly
casting the timestamp to timestamp with time zone before applying EXTRACT.
This will need to be called out as an incompatible change in the 9.2
release notes. Although having mutable behavior in a function marked
immutable is clearly a bug, we're not going to back-patch such a change.
estimate_num_groups() gets unhappy with
create table empty();
select * from empty except select * from empty e2;
I can't see any actual use-case for such a query (and the table is illegal
per SQL spec), but it seems like a good idea that it not cause an assert
failure.
The case could not arise when this code was originally written, but it can
now (since we made zero-column MergeJoins work for the benefit of FULL JOIN
ON TRUE). I don't think there is any actual bug here, but we might as well
treat it consistently with other uses of COPY_POINTER_FIELD(). Per comment
from Ashutosh Bapat.
This was a thinko in previous commit. Now that stack base pointer is now set
in PostmasterMain and SubPostmasterMain, it doesn't need to be set in
PostgresMain anymore.
We used to only initialize the stack base pointer when starting up a regular
backend, not in other processes. In particular, autovacuum workers can run
arbitrary user code, and without stack-depth checking, infinite recursion
in e.g an index expression will bring down the whole cluster.
The comment about PL/Java using set_stack_base() is not yet true. As the
code stands, PL/java still modifies the stack_base_ptr variable directly.
However, it's been discussed in the PL/Java mailing list that it should be
changed to use the function, because PL/Java is currently oblivious to the
register stack used on Itanium. There's another issues with PL/Java, namely
that the stack base pointer it sets is not really the base of the stack, it
could be something close to the bottom of the stack. That's a separate issue
that might need some further changes to this code, but that's a different
story.
Backpatch to all supported releases.
XLOG_GIN_UPDATE_META_PAGE and XLOG_GIN_DELETE_LISTPAGE records were printed
with a list link field labeled as "blkno", which was confusing, especially
when the link was empty (InvalidBlockNumber). Print the metapage block
number instead, since that's what's actually being updated. We could
include the link values too as a separate field, but not clear it's worth
the trouble.
Back-patch to 8.4 where the dubious code was added.
Commit 337b6f5ecf contained the entirely
fanciful assumption that it had made comparetup_datum unreachable.
Reported and patched by Takashi Yamamoto.
Fix up some not terribly accurate/useful comments from that commit, too.
If we make the initially-called function return the table physical-size
estimate, acquire_inherited_sample_rows will be able to use that to
allocate numbers of samples among child tables, when the day comes that
we want to support foreign tables in inheritance trees.
ANALYZE now accepts foreign tables and allows the table's FDW to control
how the sample rows are collected. (But only manual ANALYZEs will touch
foreign tables, for the moment, since among other things it's not very
clear how to handle remote permissions checks in an auto-analyze.)
contrib/file_fdw is extended to support this.
Etsuro Fujita, reviewed by Shigeru Hanada, some further tweaking by me.
Somebody didn't bother to fix this comment while adding foreign table
support to the code below it.
In passing, remove the explicit calling-out of relkind letters, which adds
complexity to the comment but doesn't help in understanding the code.
Ants Aasma's original patch to add timing information for buffer I/O
requests exposed this data at the relation level, which was judged too
costly. I've here exposed it at the database level instead.
The parser got confused if a cursor parameter had the same name as
a plpgsql variable. Reported and diagnosed by Yeb Havinga, though
this isn't exactly his proposed fix.
Also, some mostly-but-not-entirely-cosmetic adjustments to the original
named-cursor-parameter patch, for code readability and better error
diagnostics.
Traditionally libpq has collected an entire query result before passing
it back to the application. That provides a simple and transactional API,
but it's pretty inefficient for large result sets. This patch allows the
application to process each row on-the-fly instead of accumulating the
rows into the PGresult. Error recovery becomes a bit more complex, but
often that tradeoff is well worth making.
Kyotaro Horiguchi, reviewed by Marko Kreen and Tom Lane
There is no existing or foreseeable case in which psql should see a
PGRES_COPY_BOTH PQresultStatus; and if such a case ever emerges, it's a
pretty good bet that these code fragments wouldn't do the right thing
anyway. Remove them, and let the existing default cases do the appropriate
thing, namely emit an "unexpected PQresultStatus" bleat.
Noted while working on libpq row processor patch, for which I was
considering adding a PGRES_SUSPENDED status code --- the same default-case
treatment would be appropriate for that.
The original coding of the syslogger had an arbitrary limit of 20 large
messages concurrently in progress, after which it would just punt and dump
message fragments to the output file separately. Our ambitions are a bit
higher than that now, so allow the data structure to expand as necessary.
Reported and patched by Andrew Dunstan; some editing by Tom
Combining the loop workspace with the record of already-processed objects
might have been a cute trick, but it behaves horridly if there are many
dependency loops to repair: the time spent in the first step of findLoop()
grows as O(N^2). Instead use a separate flag array indexed by dump ID,
which we can check in constant time. The length of the workspace array
is now never more than the actual length of a dependency chain, which
should be reasonably short in all cases of practical interest. The code
is noticeably easier to understand this way, too.
Per gripe from Mike Roest. Since this is a longstanding performance bug,
backpatch to all supported versions.
The loop that matched owned sequences to their owning tables required time
proportional to number of owned sequences times number of tables; although
this work was only expended in selective-dump situations, which is probably
why the issue wasn't recognized long since. Refactor slightly so that we
can perform this work after the index array for findTableByOid has been
set up, reducing the time to O(M log N).
Per gripe from Mike Roest. Since this is a longstanding performance bug,
backpatch to all supported versions.
ecpg and pg_dump each contain keyword arrays with structure similar
to the backend's keyword array. Up to now, we actually named those
arrays the same as the backend's and relied on parser/keywords.h
to declare them. This seems a tad too cute, though, and it breaks
now that we need to PGDLLIMPORT-decorate the backend symbols.
Rename to avoid the problem. Per buildfarm.
(It strikes me that maybe we should get rid of the separate keywords.c
files altogether, and just define these arrays in the modules that use
them, but that's a rather more invasive change.)
Over-optimization (by me, looks like :-() broke the case of recognizing
a word boundary just before a quoted identifier. Reported and diagnosed
by Dean Rasheed.
Some of these are newly added, some are older and were forgotten, some
don't contain any translatable strings right now but look like they
could in the future.
Some Windows-only messages had apparently been forgotten so far.
Also make the wording of the messages more consistent with similar
messages other parts, such as pg_ctl and pg_regress.
Initialise ckptXidEpoch from starting checkpoint and maintain the correct
value as we roll forwards. This allows GetNextXidAndEpoch() to return the
correct epoch when executed during recovery. Backpatch to 9.0 when the
problem is first observable by a user.
Bug report from Daniel Farina
Postmaster sets max_safe_fds by testing how many open file descriptors it
can open, and that is normally inherited by all child processes at fork().
Not so on EXEC_BACKEND, ie. Windows, however. Because of that, we
effectively ignored max_files_per_process on Windows, and always assumed
a conservative default of 32 simultaneous open files. That could have an
impact on performance, if you need to access a lot of different files
in a query. After this patch, the value is passed to child processes by
save/restore_backend_variables() among many other global variables.
It has been like this forever, but given the lack of complaints about it,
I'm not backpatching this.
Generally, the parse location assigned to a multiple-token construct is
the location of its leftmost token. This commit breaks that rule for
the syntaxes TYPENAME 'LITERAL' and CAST(CONSTANT AS TYPENAME) --- the
resulting Const will have the location of the literal string, not the
typename or CAST keyword. The cases where this matters are pretty thin on
the ground (no error messages in the regression tests change, for example),
and it's unlikely that any user would be confused anyway by an error cursor
pointing at the literal. But still it's less than consistent. The reason
for changing it is that contrib/pg_stat_statements wants to know the parse
location of the original literal, and it was agreed that this is the least
unpleasant way to preserve that information through parse analysis.
Peter Geoghegan
Add a queryId field to Query and PlannedStmt. This is not used by the
core backend, except for being copied around at appropriate times.
It's meant to allow plug-ins to track a particular query forward from
parse analysis to execution.
The queryId is intentionally not dumped into stored rules (and hence this
commit doesn't bump catversion). You could argue that choice either way,
but it seems better that stored rule strings not have any dependency
on plug-ins that might or might not be present.
Also, add a post_parse_analyze_hook that gets invoked at the end of
parse analysis (but only for top-level analysis of complete queries,
not cases such as analyzing a domain's default-value expression).
This is mainly meant to be used to compute and assign a queryId,
but it could have other applications.
Peter Geoghegan
Currently, the only way to see the numbers this gathers is via
EXPLAIN (ANALYZE, BUFFERS), but the plan is to add visibility through
the stats collector and pg_stat_statements in subsequent patches.
Ants Aasma, reviewed by Greg Smith, with some further changes by me.
Tom Lane
Robert Haas
Heikki Linnakangas
Bruce Momjian
Simon Riggs
Peter Eisentraut
Andrew Dunstan