Previously it was thought that it's impossible as the code stands, because
insertions create buffers as tuples are cascaded downwards, and index
split also creaters buffers eagerly for all halves. But the example from
Jay Levitt demonstrates that it can happen, when the root page is split.
It's in fact OK if the buffer doesn't exist, so we just need to remove the
sanity check. In fact, we've been discussing the possibility of destroying
empty buffers to conserve memory, which would render the sanity check
completely useless anyway.
Fix by Alexander Korotkov
The <literal> markup is not visible as distinct on man pages, which
creates a bit of confusion when looking at the documentation of the
pg_basebackup -l option. Rather than reinventing the entire font
system for man pages to remedy this, just put some quotes around this
particular case, which should also help in other output formats.
It's not necessary and can only create confusion about which libpq
installation should be used.
Also remove some dead code from the makefile that was apparently
copied from elsewhere.
Running "psql -f -" used to print
psql:<stdin>:1: ERROR: blah
but that got broken between 8.4 and 9.0 (commit
b291c0fba8), and now it printed
psql:-:1: ERROR: blah
This reverts to the old behavior and cleans up some code that was left
dead or useless by the mentioned commit.
The only toastable column now is datacl, but we don't really support
long ACLs anyway. The TOAST table should have been removed when the
pg_db_role_setting catalog was introduced in commit
2eda8dfb52, but I forgot to do that.
Per -hackers discussion on March 2011.
Several places were still written as though standard_conforming_strings
didn't exist, much less be the default. Now that it is on by default,
we can simplify the text and just insert occasional notes suggesting that
you might have to think harder if it's turned off. Per discussion of a
suggestion from Hannes Frederic Sowa.
Back-patch to 9.1 where standard_conforming_strings was made the default.
A prepared transaction can get new conflicts in and out after preparing, so
we cannot rely on the in- and out-flags stored in the statefile at prepare-
time. As a quick fix, make the conservative assumption that after a restart,
all prepared transactions are considered to have both in- and out-conflicts.
That can lead to unnecessary rollbacks after a crash, but that shouldn't be
a big problem in practice; you don't want prepared transactions to hang
around for a long time anyway.
Dan Ports
This makes it much more convenient to build tools for Postgres that are
separately compiled and require a matching CRC implementation.
To prevent multiple copies of the CRC polynomial tables being introduced
into the postgres binaries, they are now included in the static library
libpgport that is mainly meant for replacement system functions. That
seems like a bit of a kludge, but there's no better place.
This cleans up building of the tools pg_controldata and pg_resetxlog,
which previously had to build their own copies of pg_crc.o.
In the future, external programs that need access to the CRC tables can
include the tables directly from the new header file pg_crc_tables.h.
Daniel Farina, reviewed by Abhijit Menon-Sen and Tom Lane
We don't need to constrain the other side of an indexable join clause to
not be below an outer join; an example here is
SELECT FROM t1 LEFT JOIN t2 ON t1.a = t2.b LEFT JOIN t3 ON t2.c = t3.d;
We can consider an inner indexscan on t3.d using c = d as indexqual, even
though t2.c is potentially nulled by a previous outer join. The comparable
logic in orindxpath.c has always worked that way, but I was being overly
cautious here.
psql backslash commands that deal with file or directory names require
quotes around those that have spaces, single quotes, or backslashes.
However, tab-completing such names does not provide said quotes, and is
thus almost useless with them.
This patch fixes the problem by having a wrapper function around
rl_filename_completion_function that dequotes on input and quotes on
output. This eases dealing with such names.
Author: Noah Misch
We already skip rewriting the table in these cases, but we still force a
whole table scan to validate the data. This can be skipped, and thus
we can make the whole ALTER TABLE operation just do some catalog touches
instead of scanning the table, when these two conditions hold:
(a) Old and new pg_constraint.conpfeqop match exactly. This is actually
stronger than needed; we could loosen things by way of operator
families, but it'd require a lot more effort.
(b) The functions, if any, implementing a cast from the foreign type to
the primary opcintype are the same. For this purpose, we can consider a
binary coercion equivalent to an exact type match. When the opcintype
is polymorphic, require that the old and new foreign types match
exactly. (Since ri_triggers.c does use the executor, the stronger check
for polymorphic types is no mere future-proofing. However, no core type
exercises its necessity.)
Author: Noah Misch
Committer's note: catalog version bumped due to change of the Constraint
node. I can't actually find any way to have such a node in a stored
rule, but given that we have "out" support for them, better be safe.
In commit 4016bdef8a I fixed a bunch of
ginxlog.c bugs having to do with not handling XLogReadBuffer failures
correctly. However, in ginRedoUpdateMetapage and ginRedoDeleteListPages,
I unaccountably thought that failure to read the metapage would be
impossible and just put in an elog(PANIC) call. This is of course wrong:
failure is exactly what will happen if the index got dropped (or rebuilt)
between creation of the WAL record and the crash we're trying to recover
from. I believe this explains Nicholas Wilson's recent report of these
errors getting reached.
Also, fix memory leak in forgetIncompleteSplit. This wasn't of much
concern when the code was written, but in a long-running standby server
page split records could be expected to accumulate indefinitely.
Back-patch to 8.4 --- before that, GIN didn't have a metapage.
Claiming that the typevar argument to DefineCompositeType() is const
was a plain lie. A similar case in DefineVirtualRelation() was
already changed in passing in commit 1575fbcb. Also clean up the now
unnecessary casts that used to cast away the const.
Most people won't read them individually anyway, it's an easy way to find
them, and it's a lot of duplicated information if they are kept in two
different places.
This makes it easier to match a column name with the description of it,
and makes it possible to add more detailed documentation in the future.
This patch does not add that extra documentation at this point, only
the structure required for it.
Modeled on the changes already done to pg_stat_activity.
The "uncomplicated" case isn't materially less complicated than the full
case, certainly not enough so to justify duplicating nearly 500 lines
of code. The only extra work being done in the full path is zaptreesubs,
which is very cheap compared to everything else being done here, and
besides that I'm less than convinced that it's not needed in some cases
even without backrefs.
In nested sub-regex trees, lower-level nodes created DFAs and then
destroyed them again before exiting, which is a bit dumb considering that
the recursive search is likely to call those nodes again later. Instead
cache each created DFA until the end of pg_regexec(). This is basically a
space for time tradeoff, in that it might increase the maximum memory
usage. However, in most regex patterns there are not all that many subre
nodes, so not that many DFAs --- and in any case, the peak usage occurs
when reaching the bottom recursion level, and except for alternation cases
that's going to be the same anyway.
Apparently some primordial version of Spencer's engine needed cdissect()
and child functions to be able to continue matching from a previous
position when re-called. That is dead code, though, since trivial
inspection shows that cdissect can never be entered without having
previously done zapmem which resets the relevant retry counter. I have
also verified experimentally that no case in the Tcl regression tests
reaches cdissect with a nonzero retry value. Accordingly, remove that
logic. This doesn't really save any noticeable number of cycles in itself,
but it is one step towards making dissect() and cdissect() equivalent,
which will allow removing hundreds of lines of near-duplicated code.
Since struct subre's "retry" field is no longer particularly related to
any kind of retry, rename it to "id". As of this commit it's only used
for identifying a subre node in debug printouts, so you might think we
should get rid of the field entirely; but I have a plan for another use.
Cases where a back-reference is part of a larger subexpression that
is quantified have never worked in Spencer's regex engine, because
he used a compile-time transformation that neglected the need to
check the back-reference match in iterations before the last one.
(That was okay for capturing parens, and we still do it if the
regex has *only* capturing parens ... but it's not okay for backrefs.)
To make this work properly, we have to add an "iteration" node type
to the regex engine's vocabulary of sub-regex nodes. Since this is a
moderately large change with a fair risk of introducing new bugs of its
own, apply to HEAD only, even though it's a fix for a longstanding bug.
pg_dump was incautious about sanitizing object names that are emitted
within SQL comments in its output script. A name containing a newline
would at least render the script syntactically incorrect. Maliciously
crafted object names could present a SQL injection risk when the script
is reloaded.
Reported by Heikki Linnakangas, patch by Robert Haas
Security: CVE-2012-0868
Both libpq and the backend would truncate a common name extracted from a
certificate at 32 bytes. Replace that fixed-size buffer with dynamically
allocated string so that there is no hard limit. While at it, remove the
code for extracting peer_dn, which we weren't using for anything; and
don't bother to store peer_cn longer than we need it in libpq.
This limit was not so terribly unreasonable when the code was written,
because we weren't using the result for anything critical, just logging it.
But now that there are options for checking the common name against the
server host name (in libpq) or using it as the user's name (in the server),
this could result in undesirable failures. In the worst case it even seems
possible to spoof a server name or user name, if the correct name is
exactly 32 bytes and the attacker can persuade a trusted CA to issue a
certificate in which that string is a prefix of the certificate's common
name. (To exploit this for a server name, he'd also have to send the
connection astray via phony DNS data or some such.) The case that this is
a realistic security threat is a bit thin, but nonetheless we'll treat it
as one.
Back-patch to 8.4. Older releases contain the faulty code, but it's not
a security problem because the common name wasn't used for anything
interesting.
Reported and patched by Heikki Linnakangas
Security: CVE-2012-0867
This check was overlooked when we added function execute permissions to the
system years ago. For an ordinary trigger function it's not a big deal,
since trigger functions execute with the permissions of the table owner,
so they couldn't do anything the user issuing the CREATE TRIGGER couldn't
have done anyway. However, if a trigger function is SECURITY DEFINER,
that is not the case. The lack of checking would allow another user to
install it on his own table and then invoke it with, essentially, forged
input data; which the trigger function is unlikely to realize, so it might
do something undesirable, for instance insert false entries in an audit log
table.
Reported by Dinesh Kumar, patch by Robert Haas
Security: CVE-2012-0866
In the Fedora variant of MinGW, the openssl libraries have their normal
names, not libeay32 and libssleay32. Adjust configure probes to allow
that, per bug #6486.
Tomasz Ostrowski
Since the current version is 1.1, the 1.0 file isn't really needed. We do
need the 1.0--1.1 upgrade file, so people on 1.0 can upgrade.
Per recent discussion on pgsql-hackers.
This allows changing the location of the files that were previously
hard-coded to server.crt, server.key, root.crt, root.crl.
server.crt and server.key continue to be the default settings and are
thus required to be present by default if SSL is enabled. But the
settings for the server-side CA and CRL are now empty by default, and
if they are set, the files are required to be present. This replaces
the previous behavior of ignoring the functionality if the files were
not found.
When "vacuuming" a single btree page by removing LP_DEAD tuples, we are not
actually within a vacuum operation, but rather in an ordinary insertion
process that could well be running concurrently with a vacuum. So clearing
the cycleid is incorrect, and could cause the concurrent vacuum to miss
removing tuples that it needs to remove. This is a longstanding bug
introduced by commit e6284649b9 of
2006-07-25. I believe it explains Maxim Boguk's recent report of index
corruption, and probably some other previously unexplained reports.
In 9.0 and up this is a one-line fix; before that we need to introduce a
flag to tell _bt_delitems what to do.
Heikki Linnakangas
Peter Eisentraut
Alvaro Herrera
Tom Lane
Magnus Hagander
Bruce Momjian
Andrew Dunstan
Robert Haas