Use --enable-nls to turn it on; see installation instructions for details.
See developer's guide how to make use of it in programs and how to add
translations.
psql sources have been almost fully prepared and an incomplete German
translation has been provided. In the backend, only elog() calls are
currently translatable, and the provided German translation file is more
of a placeholder.
calls. This has never actually cached anything, because postgres.c does
each fastpath call as a separate transaction command, and so fastpath.c
would always decide that its cache was outdated. If it had worked, it
would now be failing for calls of oldstyle functions due to dangling
pointers in the FmgrInfo struct. Rip it out for simplicity and bug-
proofing.
report on old-style functions invoked by RI triggers. We had a number of
other places that were being sloppy about which memory context FmgrInfo
subsidiary data will be allocated in. Turns out none of them actually
cause a problem in 7.1, but this is for arcane reasons such as the fact
that old-style triggers aren't supported anyway. To avoid getting burnt
later, I've restructured the trigger support so that we don't keep trigger
FmgrInfo structs in relcache memory. Some other related cleanups too:
it's not really necessary to call fmgr_info at all while setting up
the index support info in relcache entries, because those ScanKeyEntry
structs are never used to invoke the functions. This should speed up
relcache initialization a tiny bit.
basically want your guys feedback. I have sprinkled some of my q's thru
the text delimited with the @@ symbol. It seems to work perfectly.
[ Removed @@ comments because patch was reviewed. ]
At the moment it does CHECK constraints only, with inheritance. However,
due to the problem mentioned before with the mismatching between inherited
constraints it may be wise to disable the inheritance feature for a while.
it is written in an extensible fashion to support future dropping of other
types of constraint, and is well documented.
Please send me your comments, check my use of locking, updating of
indices, use of ERROR and NOTICE, etc. and I will rework the patch based
on feedback until everyone
is happy with it...
Christopher Kings
the same tuple slot that the raw tuple came from, because that slot has
the wrong tuple descriptor. Store it into its own slot with the correct
descriptor, instead. This repairs problems with SPI functions seeing
inappropriate tuple descriptors --- for example, plpgsql code failing to
cope with SELECT FOR UPDATE.
Python) to support shared extension modules, I have learned that Guido
prefers the style of the attached patch to solve the above problem.
I feel that this solution is particularly appropriate in this case
because the following:
PglargeType
PgType
PgQueryType
are already being handled in the way that I am proposing for PgSourceType.
Jason Tishler
it does not support 64bit integers. AFAIK that's the default data type for
OIDs, so I am not surprised that this does not work. Use gcc instead.
BTW., 7.1 does not compile as is with gcc either, I believed the
required patches made it into the 7.1.1 release but obviously I missed
the deadline.
Since the ports mailing list does not seem to be archived I have attached
a copy of the patch (for 7.1 and 7.1.1).
I've just performed a build of a Watcom compiled version and found a couple
of bugs in the watcom specific part of that patch. Please use the attached
version instead.
Tegge, Bernd
to do that, but inconsistently.) Make bit type reject too short input,
too, per SQL. Since it no longer zero pads, 'zpbit*' has been renamed to
'bit*' in the source, hence initdb.
- New functions to create a portal using a prepared/saved
SPI plan or lookup an existing portal by name.
- Functions to fetch/move from/in portals. Results are placed
in the usual SPI_processed and SPI_tuptable, so the entire
set of utility functions can be used to gain attribute access.
- Prepared/saved SPI plans now use their own memory context
and SPI_freeplan(plan) can remove them.
- Tuple result sets (SPI_tuptable) now uses it's own memory
context and can be free'd by SPI_freetuptable(tuptab).
Enhancement of PL/pgSQL
- Uses generic named portals internally in FOR ... SELECT
loops to avoid running out of memory on huge result sets.
- Support for CURSOR and REFCURSOR syntax using the new SPI
functionality. Cursors used internally only need no explicit
transaction block. Refcursor variables can be used inside
of explicit transaction block to pass cursors between main
application and functions.
Jan
create_index_paths are not immediately discarded, but are available for
subsequent planner work. This allows avoiding redundant syscache lookups
in several places. Change interface to operator selectivity estimation
procedures to allow faster and more flexible estimation.
Initdb forced due to change of pg_proc entries for selectivity functions!
/*
* parse function
* This code is confusing because the database can accept
* relation.column, column.function, or relation.column.function.
* In these cases, funcname is the last parameter, and fargs are
* the rest.
*
* It can also be called as func(col) or func(col,col).
* In this case, Funcname is the part before parens, and fargs
* are the part in parens.
*
*/
Node *
ParseFuncOrColumn(ParseState *pstate, char *funcname, List *fargs,
bool agg_star, bool agg_distinct,
int precedence)
PageGetFreeSpace() was being called while not holding the buffer lock, which
not only could yield a garbage answer, but even if it's the right answer there
might be less space available after we reacquire the buffer lock.
Also repair potential deadlock introduced by my recent performance improvement
in RelationGetBufferForTuple(): it was possible for two heap_updates to try to
lock two buffers in opposite orders. The fix creates a global rule that
buffers of a single heap relation should be locked in decreasing block number
order. Currently, this only applies to heap_update; VACUUM can get away with
ignoring the rule since it holds exclusive lock on the whole relation anyway.
However, if we try to implement a VACUUM that can run in parallel with other
transactions, VACUUM will also have to obey the lock order rule.
trees (mostly my fault). Repair. Also fix long-standing bug in ExecReplace:
after recomputing a concurrently updated tuple, we must recheck constraints.
Make EvalPlanQual leak memory with somewhat less enthusiasm than before,
although plugging leaks fully will require more changes than I care to risk
in a dot-release.
when we need to move to a new page; as long as we can insert the new
tuple on the same page as before, we only need LockBuffer and not the
expensive stuff. Also, twiddle bufmgr interfaces to avoid redundant
lseeks in RelationGetBufferForTuple and BufferAlloc. Successive inserts
now require one lseek per page added, rather than one per tuple with
several additional ones at each page boundary as happened before.
Lock contention when multiple backends are inserting in same table
is also greatly reduced.
not being consulted anywhere, so remove it and remove the _mdnblocks()
calls that were used to set it. Change smgrextend interface to pass in
the target block number (ie, current file length) --- the caller always
knows this already, having already done smgrnblocks(), so it's silly to
do it over again inside mdextend. Net result: extension of a file now
takes one lseek(SEEK_END) and a write(), not three lseeks and a write.
collected by ANALYZE. Also, add some modest amount of intelligence to
guesses that are used for varlena columns in the absence of any ANALYZE
statistics. The 'width' reported by EXPLAIN is finally something less
than totally bogus for varlena columns ... and, in consequence, hashjoin
estimating should be a little better ...
a separate statement (though it can still be invoked as part of VACUUM, too).
pg_statistic redesigned to be more flexible about what statistics are
stored. ANALYZE now collects a list of several of the most common values,
not just one, plus a histogram (not just the min and max values). Random
sampling is used to make the process reasonably fast even on very large
tables. The number of values and histogram bins collected is now
user-settable via an ALTER TABLE command.
There is more still to do; the new stats are not being used everywhere
they could be in the planner. But the remaining changes for this project
should be localized, and the behavior is already better than before.
A not-very-related change is that sorting now makes use of btree comparison
routines if it can find one, rather than invoking '<' twice.
routine DetermineLocalTimeZone(). In that routine, be more wary of
broken mktime() implementations than the original code was: don't allow
mktime to change the already-set y/m/d/h/m/s information, and don't
use tm_gmtoff if mktime failed. Possibly this will resolve some of
the complaints we've been hearing from users of Middle Eastern timezones
on RedHat.
give consistent results for all datatypes. Types float4, float8, and
numeric were broken for NaN values; abstime, timestamp, and interval
were broken for INVALID values; timetz was just plain broken (some
possible pairs of values were neither < nor = nor >). Also clean up
text, bpchar, varchar, and bit/varbit to eliminate duplicate code and
thereby reduce the probability of similar inconsistencies arising in
the future.
as six bytes not eight. This fixes a regression test failure but more
importantly avoids wasting four bytes of pad space in every tuple header.
Also add some commentary about what's going on.
accepts nnnLL syntax for long long constants. If so, decorate the CRC64
constants with LL to avoid warnings and/or erroneous results from certain
non-standards-compliant compilers.
O_SYNC, or O_DSYNC (as available on a given platform). Add GUC parameter
to control sync method.
Also, add defense to XLogWrite to prevent it from going nuts if passed
a target write position that's past the end of the buffers so far filled
by XLogInsert.
detect case that next page in log came from an older run than the prior
page. This avoids the necessity to re-zero the log after recovery from
a crash, which is good because we need not risk destroying valuable log
information.
This forces another initdb since yesterday :-(. Need to get that log
reset utility done...
* Store two past checkpoint locations, not just one, in pg_control.
On startup, we fall back to the older checkpoint if the newer one
is unreadable. Also, a physical copy of the newest checkpoint record
is kept in pg_control for possible use in disaster recovery (ie,
complete loss of pg_xlog). Also add a version number for pg_control
itself. Remove archdir from pg_control; it ought to be a GUC
parameter, not a special case (not that it's implemented yet anyway).
* Suppress successive checkpoint records when nothing has been entered
in the WAL log since the last one. This is not so much to avoid I/O
as to make it actually useful to keep track of the last two
checkpoints. If the things are right next to each other then there's
not a lot of redundancy gained...
* Change CRC scheme to a true 64-bit CRC, not a pair of 32-bit CRCs
on alternate bytes. Polynomial borrowed from ECMA DLT1 standard.
* Fix XLOG record length handling so that it will work at BLCKSZ = 32k.
* Change XID allocation to work more like OID allocation. (This is of
dubious necessity, but I think it's a good idea anyway.)
* Fix a number of minor bugs, such as off-by-one logic for XLOG file
wraparound at the 4 gig mark.
* Add documentation and clean up some coding infelicities; move file
format declarations out to include files where planned contrib
utilities can get at them.
* Checkpoint will now occur every CHECKPOINT_SEGMENTS log segments or
every CHECKPOINT_TIMEOUT seconds, whichever comes first. It is also
possible to force a checkpoint by sending SIGUSR1 to the postmaster
(undocumented feature...)
* Defend against kill -9 postmaster by storing shmem block's key and ID
in postmaster.pid lockfile, and checking at startup to ensure that no
processes are still connected to old shmem block (if it still exists).
* Switch backends to accept SIGQUIT rather than SIGUSR1 for emergency
stop, for symmetry with postmaster and xlog utilities. Clean up signal
handling in bootstrap.c so that xlog utilities launched by postmaster
will react to signals better.
* Standalone bootstrap now grabs lockfile in target directory, as added
insurance against running it in parallel with live postmaster.
when user does another FETCH after reaching end of data, or another
FETCH backwards after reaching start. This is needed because some plan
nodes are not very robust about being called again after they've already
returned NULL; for example, MergeJoin will crash in some states but not
others. While the ideal approach would be for them all to handle this
correctly, it seems foolish to assume that no such bugs would creep in
again once cleaned up. Therefore, the most robust answer is to prevent
the situation from arising at all.
noncachable, so that CURRENT_DATE and CURRENT_TIME work as functions
again, rather than being collapsed to constants immediately. Marking the
reverse conversions noncachable might be overkill, but I'm not sure;
do these datatypes have the notion of a CURRENT value? Better safe than
sorry, for now.
only if at least N other backends currently have open transactions. This
is not a great deal of intelligence about whether a delay might be
profitable ... but it beats no intelligence at all. Note that the default
COMMIT_DELAY is still zero --- this new code does nothing unless that
setting is changed.
Also, mark ENABLEFSYNC as a system-wide setting. It's no longer safe to
allow that to be set per-backend, since we may be relying on some other
backend's fsync to have synced the WAL log.
> Is there one LOCKMETHODCTL for every backend? I thought there was only
> one of them.
>>
>> You're right, that line is erroneous; it should read
>>
>> size += MAX_LOCK_METHODS * MAXALIGN(sizeof(LOCKMETHODCTL));
>>
>> Not a significant error but it should be changed for clarity ...
be lurking in the install target directory. But don't zap up-to-date
headers (so install-all-headers before regular install will work).
Per suggestion from Larry Rosenman.
use the ANSI varargs style (<stdarg.h>) not the old style. Tatsuo had
reported this change was necessary back in the 7.0 beta cycle (4/13/00)
but for some reason, making the edit never got done.
waste of cycles on single-CPU machines, and of dubious utility on multi-CPU
machines too.
Tweak s_lock_stuck so that caller can specify timeout interval, and
increase interval before declaring stuck spinlock for buffer locks and XLOG
locks.
On systems that have fdatasync(), use that rather than fsync() to sync WAL
log writes. Ensure that WAL file is entirely allocated during XLogFileInit.
1. If there is exactly one pg_operator entry of the right name and oprkind,
oper() and related routines would return that entry whether its input type
had anything to do with the request or not. This is just premature
optimization: we shouldn't return the single candidate until after we verify
that it really is a valid candidate, ie, is at least coercion-compatible
with the given types.
2. oper() and related routines only promise a coercion-compatible result.
Unfortunately, there were quite a few callers that assumed the returned
operator is binary-compatible with the given datatype; they would proceed
to call it without making any datatype coercions. These callers include
sorting, grouping, aggregation, and VACUUM ANALYZE. In general I think
it is appropriate for these callers to require an exact or binary-compatible
match, so I've added a new routine compatible_oper() that only succeeds if
it can find an operator that doesn't require any run-time conversions.
Callers now call oper() or compatible_oper() depending on whether they are
prepared to deal with type conversion or not.
The upshot of these bugs is revealed by the following silliness in PL/Tcl's
selftest: it creates an operator @< on int4, and then tries to use it to
sort a char(N) column. The system would let it do that :-( (and evidently
has done so since 6.3 :-( :-(). The result in this case was just a silly
sort order, but the reverse combination would've provoked coredump from
trying to dereference integers. With this fix you get more reasonable
behavior:
pltcl_test=# select * from T_pkey1 order by key1, key2 using @<;
ERROR: Unable to identify an operator '@<' for types 'bpchar' and 'bpchar'
You will have to retype this query using an explicit cast
compressed storage works perfectly well. Might as well have a coherent
strategy for applying it, rather than the haphazard store-what-you-get
approach that was in the code before. The strategy I've set up here is
to attempt compression of any compressible index value exceeding
BLCKSZ/16, or about 500 bytes by default.
clause with an alias is a <subquery> and therefore hides table references
appearing within it, according to the spec. This is the same as the
preliminary patch I posted to pgsql-patches yesterday, plus some really
grotty code in ruleutils.c to reverse-list a query tree with the correct
alias name depending on context. I'd rather not have done that, but unless
we want to force another initdb for 7.1, there's no other way for now.
as previously discussed.
It makes AIX and IRIX not use DST for dates before 1970.
The following expected files need to be removed from the regression tests,
they contain wrong results and are not needed any more.
src/test/regress/expected/horology-1947-PDT.out
src/test/regress/expected/tinterval-1947-PDT.out
src/test/regress/expected/abstime-1947-PDT.out
Zeugswetter Andreas
definitions from K&R to ANSI C style, and fix broken assumption that
int and long are the same datatype. This repairs problems observed
on Alpha with regexps having between 32 and 63 states.
two transactions create the same table name concurrently, the one that
fails will complain about unique index pg_class_relname_index, rather than
about pg_type_typname_index which'll confuse most people. Free side
benefit: pg_class.reltype is correctly linked to the pg_type entry now.
It's been zero in all but the preloaded pg_class entries since who knows
when.
