Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
even uglier than it was already :-(. Also, on Windows only, use temporary
shared memory segments instead of ordinary files to pass over critical
variable values from postmaster to child processes. Magnus Hagander
environment variable processing to libpq.
The patch also adds code to our client apps so we set the environment
variable directly based on our binary location, unless it is already
set. This will allow our applications to emit proper locale messages
that are generated in libpq.
than being random pieces of other files. Give bgwriter responsibility
for all checkpoint activity (other than a post-recovery checkpoint);
so this child process absorbs the functionality of the former transient
checkpoint and shutdown subprocesses. While at it, create an actual
include file for postmaster.c, which for some reason never had its own
file before.
about a third, make it work on non-Windows platforms again. (But perhaps
I broke the WIN32 code, since I have no way to test that.) Fold all the
paths that fork postmaster child processes to go through the single
routine SubPostmasterMain, which takes care of resurrecting the state that
would normally be inherited from the postmaster (including GUC variables).
Clean up some places where there's no particularly good reason for the
EXEC and non-EXEC cases to work differently. Take care of one or two
FIXMEs that remained in the code.
timezone code and other places.
Remove elog() calls from find_my_exec; do fprintf(stderr) instead. We
can then remove the exec.c handling in the makefile because it doesn't
have to be built to suppress elog calls.
* removed a few redundant defines
* get_user_name safe under win32
* rationalized pipe read EOF for win32 (UPDATED PATCH USED)
* changed all backend instances of sleep() to pg_usleep
- except for the SLEEP_ON_ASSERT in assert.c, as it would exceed a
32-bit long [Note to patcher: If a SLEEP_ON_ASSERT of 2000 seconds is
acceptable, please replace with pg_usleep(2000000000L)]
I added a comment to that part of the code:
/*
* It would be nice to use pg_usleep() here, but only does 2000 sec
* or 33 minutes, which seems too short.
*/
sleep(1000000);
Claudio Natoli
that by querying the environment explicitly first for LC_COLLATE and
LC_CTYPE. We have to do this because initdb passes those values in the
environment. If there is nothing there we fall back on the codepage.
Andrew Dunstan
* Mostly, casting etc to remove compilation warnings in win32 only code.
* main.c: set _IONBF to stdout/stderr under win32 (under win32, _IOLBF
defaults to full buffering)
* pg_resetxlog/Makefile: ensures dirmod.o gets cleaned (got bitten by
this when, after "make clean"ing, switching compilation between Ming +
Cygwin)
Claudio Natoli
logically belongs. Arrange to update the _NSGetArgv() copy of the argv
pointer on Darwin. (It seems likely that other NeXT-derived platforms
also have an _NSGetArgv() problem, but until we have some reports I'll
just make this #ifdef __darwin__.)
* configure + Makefile changes
* shared memory attaching in EXEC_BACKEND case (+ minor fix for apparent
cygwin bug under cygwin/EXEC_BACKEND case only)
* PATH env var separator differences
* missing win32 rand functions added
* placeholder replacements for sync etc under port.h
To those who are really interested, and there are a few of you: the attached
patch + file will allow the source base to be compiled (and, for some
definition, "run") under MingW, with the following caveats (I wanted to
first properly fix all but the last of these, but y'all won't quit asking
for a patch :-):
* child death: SIGCHLD not yet sent, so as a minimum, you'll need to
put in some sort of delay after StartupDatabase, and handle setting
StartupPID to 0 etc (ie. the stuff the reaper() signal function is supposed
to do)
* dirmod.c: comment out the elog calls
* dfmgr.c: some hackage required to substitute_libpath_macro
* slru/xact.c: comment out the errno checking after the readdir
(fixed by next version of MingW)
Again, this is only if you *really* want to see postgres compile and start,
and is a nice leg-up for working on the other Win32 TODO list items. Just
don't expect too much else from it at this point...
Claudio Natoli
against the latest shapshot. It also includes the replacement of kill()
with pqkill() and sigsetmask() with pqsigsetmask().
Passes all tests fine on my linux machine once applied. Still doesn't
link completely on Win32 - there are a few things still required. But
much closer than before.
At Bruce's request, I'm goint to write up a README file about the method
of signals delivery chosen and why the others were rejected (basically a
summary of the mailinglist discussions). I'll finish that up once/if the
patch is accepted.
Magnus Hagander
BackendFork/SSDataBase/pgstat) startup, to allow fork/exec calls to
closely mimic (the soon to be provided) Win32 CreateProcess equivalent
calls.
Claudio Natoli
every string, especially if some of the output should be fixed-format
machine-readable. This needs to be more carefully sorted out. Also, make
the help message generated by --help-config -h be more similar in style to
the others.
without needing a running backend. Reorder postgresql.conf.sample
to match new layout of runtime.sgml. This commit re-adds work lost
in Wednesday's crash.
Win32 port is now called 'win32' rather than 'win'
add -lwsock32 on Win32
make gethostname() be only used when kerberos4 is enabled
use /port/getopt.c
new /port/opendir.c routines
disable GUC unix_socket_group on Win32
convert some keywords.c symbols to KEYWORD_P to prevent conflict
create new FCNTL_NONBLOCK macro to turn off socket blocking
create new /include/port.h file that has /port prototypes, move
out of c.h
new /include/port/win32_include dir to hold missing include files
work around ERROR being defined in Win32 includes
postgres.h or c.h includes a system header (such as stdio.h or
stdlib.h), there's no need to specifically include it in any of the .c
files in the backend.
Neil Conway
GUC support. It's now possible to set datestyle, timezone, and
client_encoding from postgresql.conf and per-database or per-user
settings. Also, implement rollback of SET commands that occur in a
transaction that later fails. Create a SET LOCAL var = value syntax
that sets the variable only for the duration of the current transaction.
All per previous discussions in pghackers.
environment strings need to be moved around, do so when called from
initial startup (main.c), not in init_ps_status. This eliminates the
former risk of invalidating saved environment-string pointers, since
no code has yet had a chance to grab any such pointers when main.c
is running.
per suggestion from Peter. Simplify several APIs by transmitting the
original argv location directly from main.c to ps_status.c, instead of
passing it down through several levels of subroutines.
Use --enable-nls to turn it on; see installation instructions for details.
See developer's guide how to make use of it in programs and how to add
translations.
psql sources have been almost fully prepared and an incomplete German
translation has been provided. In the backend, only elog() calls are
currently translatable, and the provided German translation file is more
of a placeholder.
to the use of getpwuid when running in standalone mode.
this patch allocates some persistent storage (using
strdup) to store the username obtained with getpwuid
in src/backend/main/main.c. this is necessary because
later on, getpwuid is called again (in ValidateBinary).
the man pages for getpwuid on SCO OpenServer, FreeBSD,
and Darwin all have words to this effect (this is from
the SCO OpenServer man page):
Note
====
All information is contained in a static area, so it must
be copied if it is to be saved. Otherwise, it may be
overwritten on subsequent calls to these routines.
in particular, on my platform, the storage used to hold
the pw_name from the first call is overwritten such that
it looks like an empty username. this causes a problem
later on in SetSessionUserIdFromUserName.
i'd assume this isn't a problem on most platforms because
getpwuid is called with the same UID both times, and the
same thing ends up happening to that static storage each
time. however, that's not guaranteed, and is _not_ what
happens on my platform (at least :).
this is for the version of 7.1 available via anon cvs as
of Tue Jan 23 15:14:00 2001 PST:
.../src/backend/main/main.c,v 1.37 2000/12/31 18:04:35 tgl Exp
-michael thornburgh, zenomt@armory.com
Context diff this time.
Remove -m486 compile args for FreeBSD-i386, compile -O2 on i386.
Compile with only -O on alpha for codegen safety.
Make the port use the TEST_AND_SET for alpha and i386 on FreeBSD.
Fix a lot of bogus string formats for outputting pointers (cast to int
and %u/%x replaced with no cast and %p), and 'Size'(size_t) are now
cast to 'unsigned long' and output with %lu/
Remove an unused variable.
Alfred Perlstein
Makefile.port, since they are of no use to configure and much of the
library magic happens in Makefile.port anyway.
Use __alpha, not __alpha__, since the former is universally available.
Remove -DNOFIXADE from the compile command line and put it in the port
include file.
after that dynamic loading isn't working and shared memory handling is
broken.
Attached with this message, there is a Zip file which contain :
* beos.diff = patch file generated with difforig
* beos = folder with beos support files which need to be moved in /
src/backend/port
* expected = foler with three file for message and precision
difference in regression test
* regression.diff = rule problem (need to kill the backend manualy)
* dynloader = dynloader files (they are also in the pacth files,
but there is so much modification that I have join full files)
Everything works except a problem in 'rules' Is there some problems
with rules in the current tree ? It used to works with last week tree.
Cyril VELTER
working on the VERY latest version of BeOS. I'm sure there will be
alot of comments, but then if there weren't I'd be disappointed!
Thanks for your continuing efforts to get this into your tree.
Haven't bothered with the new files as they haven't changed.
BTW Peter, the compiler is "broken" about the bool define and so on.
I'm filing a bug report to try and get it addressed. Hopefully then we
can tidy up the code a bit.
I await the replies with interest :)
David Reid
user is now defined in terms of the user id, the user name is only computed
upon request (for display purposes). This is kind of the opposite of the
previous state, which would maintain the user name and compute the user id
for permission checks.
Besides perhaps saving a few cycles (integer vs string), this now creates a
single point of attack for changing the user id during a connection, for
purposes of "setuid" functions, etc.
Ok, I have finally gotten all of the defines for Dec/Alpha and
Linux/Alpha sorted out as Marc asked. There is no longer any need for
'-Dalpha' or '-Dlinuxalpha' in either the Dec/Alpha or the Linux/Alpha
template files (./src/template/{alpha,linuxalpha}). I have replaced every
instance of 'alpha' or '__alpha__' with '__alpha', as that appears to be
the common symbol between C compilers on both operating systems (RH4.2 &
DecUnix 4.0b) for alpha.
Attached you'll find a (big) patch that fixes make dep and make
depend in all Makefiles where I found it to be appropriate.
It also removes the dependency in Makefile.global for NAMEDATALEN
and OIDNAMELEN by making backend/catalog/genbki.sh and bin/initdb/initdb.sh
a little smarter.
This no longer requires initdb.sh that is turned into initdb with
a sed script when installing Postgres, hence initdb.sh should be
renamed to initdb (after the patch has been applied :-) )
This patch is against the 6.3 sources, as it took a while to
complete.
Please review and apply,
Cheers,
Jeroen van Vianen
to main.c are only to add some extra includes to support some code
that's suddenly being used.
The #define ASSEMBLER is to prevent most of the code of sys/proc.h
from being included, as it ends up conflicting with some of the
postgresql definitions. This may or may not work on other versions
of Digital Unix.
Get alpha working. Yea. Dwayne Bailey
Makefile.global.
End result, if all goes well, should allow for much easier porting, since
there will no longer be a concept of a "port". Most, if not everything,
*should* be determined by configure, or by the compiler itself. Still
work to be done though :)
tree "non-PORTNAME" dependent. Technically, anything that is PORTNAME
dependent should be able to be derived at compile time, through configure
or through gcc
Subject: [PATCHES] Patches for compiling 6.1 on Digital Unix 3.2c
Attached to this message are the patches I needed to compile 6.1 cleanly
under Digital Unix 3.2c with DEC cc.
I hope these are the last ones. At least, the number of files needing a
patch has decreased noticeably since I sent my previous patches. Nice work
:-)
One of the patches is a bug fix, but I'm including it here anyway.
With these patches applied, the beast seems to work properly. However,
I've done only some preliminary tests. More on this later (but hopefully
before the April 30 deadline... :-)
Subject: [HACKERS] Money integration patches
Here are patches to integrate the money data type. I have included
some math and aggregate functions and have made the locale support optional
by #ifdef USE_LOCALE bracketing of functions.
Modules affected are:
builtins.h.patch
cash.c.patch
cash.h.patch
main.c.patch
pg_aggregate.h.patch
pg_operator.h.patch
pg_proc.h.patch
pg_type.h.patch
I changed the data type to be pass-by-reference rather than by-value
to pave the way for a larger internal representation (64-bit ints?).
Also, I changed the tabbing of cash.c and cash.h to match most of
the other Postgres source code files (4 space indent, 8 spaces == 1 tab).
The locale stuff should be tested under another convention (Russian?)
but I don't know what the correct results should be so perhaps someone
else can give them a try. Will update docs and regression tests in
the next few days.
Subject: [HACKERS] locale patches !
Hi there,
here are little patches to get Postgres 6.1 works with locale stuff.
This is a patch against 970402.tar.gz, there are no problem to apply them
by hand to 6.0 release. Collate stuff tested about 1-2 months in real
working database but I'm sure there must be no problem. US hackers
could vote against locale implementation ( locale for sure will affect to
speed of postgres ), so I introduce variable USE_LOCALE which
controls locale stuff. Non-US users now could use ~* operator
for searching and <order by> for strings with nation alphabet.
Please, don't forget, as I did first time, to set environment variable
LC_CTYPE and LC_COLLATE because backend get locale information from them.
I start postmaster from a little script, assuming that shell is Bash shell
it looks like:
#!/bin/sh
export LC_CTYPE=koi8-r
export LC_COLLATE=koi8-r
postmaster -B 1024 -S -D/usr/local/pgsql/data/ -o '-Fe'