Previously when the standby server failed to retrieve WAL files from any sources
(i.e., streaming replication, local pg_xlog directory or WAL archive), it always
waited for five seconds (hard-coded) before the next attempt. For example,
this is problematic in warm-standby because restore_command can fail
every five seconds even while new WAL file is expected to be unavailable for
a long time and flood the log files with its error messages.
This commit adds new parameter, wal_retrieve_retry_interval, to control that
wait time.
Alexey Vasiliev and Michael Paquier, reviewed by Andres Freund and me.
The flag is supposed to be copied from the record. Same issue with
track_commit_timestamps, but that's master-only.
Report and fix by Petr Jalinek. Backpatch to 9.4, where wal_log_hints was
added.
Since commit ba94518a, we used XLogFileOpen to open the next segment for
writing, but if the end-of-recovery happens exactly at a segment boundary,
the new segment might not exist yet. (Before ba94518a, XLogFileOpen was
correct, because we would open the previous segment if the switch happened
at the boundary.)
Instead of trying to create it if necessary, it's simpler to not bother
opening the segment at all. XLogWrite() will open or create it soon anyway,
after writing the checkpoint or end-of-recovery record.
Reported by Andres Freund.
At one point in the development of this feature, it was claimed that
allowing negative values would be useful to compensate for timezone
differences between master and slave servers. That was based on a mistaken
assumption that commit timestamps are recorded in local time; but of course
they're in UTC. Nor is a negative apply delay likely to be a sane way of
coping with server clock skew. However, the committed patch still treated
negative delays as doing something, and the timezone misapprehension
survived in the user documentation as well.
If recovery_min_apply_delay were a proper GUC we'd just set the minimum
allowed value to be zero; but for the moment it seems better to treat
negative settings as if they were zero.
In passing do some extra wordsmithing on the parameter's documentation,
including correcting a second misstatement that the parameter affects
processing of Restore Point records.
Issue noted by Michael Paquier, who also provided the code patch; doc
changes by me. Back-patch to 9.4 where the feature was introduced.
Besides being shorter and much easier to read it changes the logic in
LWLockRelease() to release all shared lockers when waking up any. This
can yield some significant performance improvements - and the fairness
isn't really much worse than before, as we always allowed new shared
lockers to jump the queue.
This reverts commit 1826987a46.
The overall design was deemed unacceptable, in discussion following the
previous commit message; we might find some parts of it still
salvageable, but I don't want to be on the hook for fixing it, so let's
wait until we have a new patch.
The previous representation using a boolean column for each attribute
would not scale as well as we want to add further attributes.
Extra auxilliary functions are added to go along with this change, to
make up for the lost convenience of access of the old representation.
Catalog version bumped due to change in catalogs and the new functions.
Author: Adam Brightwell, minor tweaks by Álvaro
Reviewed by: Stephen Frost, Andres Freund, Álvaro Herrera
XLogFileInit() returns a file descriptor, which needs to be closed. The leak
was short-lived, since the startup process exits shortly afterwards, but it
was clearly a bug, nevertheless.
Per Coverity report.
We used time(null) to set a TimestampTz field, which gave bogus results.
Noticed while looking at pg_xlogdump output.
Backpatch to 9.3 and above, where the fast promotion was introduced.
Previously, if you wanted anything besides C-string hash keys, you had to
specify a custom hashing function to hash_create(). Nearly all such
callers were specifying tag_hash or oid_hash; which is tedious, and rather
error-prone, since a caller could easily miss the opportunity to optimize
by using hash_uint32 when appropriate. Replace this with a design whereby
callers using simple binary-data keys just specify HASH_BLOBS and don't
need to mess with specific support functions. hash_create() itself will
take care of optimizing when the key size is four bytes.
This nets out saving a few hundred bytes of code space, and offers
a measurable performance improvement in tidbitmap.c (which was not
exploiting the opportunity to use hash_uint32 for its 4-byte keys).
There might be some wins elsewhere too, I didn't analyze closely.
In future we could look into offering a similar optimized hashing function
for 8-byte keys. Under this design that could be done in a centralized
and machine-independent fashion, whereas getting it right for keys of
platform-dependent sizes would've been notationally painful before.
For the moment, the old way still works fine, so as not to break source
code compatibility for loadable modules. Eventually we might want to
remove tag_hash and friends from the exported API altogether, since there's
no real need for them to be explicitly referenced from outside dynahash.c.
Teodor Sigaev and Tom Lane
Two changes:
1. When copying a WAL segment from old timeline to create the first segment
on the new timeline, only copy up to the point where the timeline switch
happens, and zero-fill the rest. This avoids corner cases where we might
think that the copied WAL from the previous timeline belong to the new
timeline.
2. If the timeline switch happens at a segment boundary, don't copy the
whole old segment to the new timeline. It's pointless, because it's 100%
identical to the old segment.
When starting up from a basebackup taken off a standby extra logic has
to be applied to compute the point where the data directory is
consistent. Normal base backups use a WAL record for that purpose, but
that isn't possible on a standby.
That logic had a error check ensuring that the cluster's control file
indicates being in recovery. Unfortunately that check was too strict,
disregarding the fact that the control file could also indicate that
the cluster was shut down while in recovery.
That's possible when the a cluster starting from a basebackup is shut
down before the backup label has been removed. When everything goes
well that's a short window, but when either restore_command or
primary_conninfo isn't configured correctly the window can get much
wider. That's because inbetween reading and unlinking the label we
restore the last checkpoint from WAL which can need additional WAL.
To fix simply also allow starting when the control file indicates
"shutdown in recovery". There's nicer fixes imaginable, but they'd be
more invasive.
Backpatch to 9.2 where support for taking basebackups from standbys
was added.
Rename parameter action_at_recovery_target to
recovery_target_action suggested by Christoph Berg.
Place into recovery.conf suggested by Fujii Masao,
replacing (deprecating) earlier parameters, per
Michael Paquier.
Transactions can now set their commit timestamp directly as they commit,
or an external transaction commit timestamp can be fed from an outside
system using the new function TransactionTreeSetCommitTsData(). This
data is crash-safe, and truncated at Xid freeze point, same as pg_clog.
This module is disabled by default because it causes a performance hit,
but can be enabled in postgresql.conf requiring only a server restart.
A new test in src/test/modules is included.
Catalog version bumped due to the new subdirectory within PGDATA and a
couple of new SQL functions.
Authors: Álvaro Herrera and Petr Jelínek
Reviewed to varying degrees by Michael Paquier, Andres Freund, Robert
Haas, Amit Kapila, Fujii Masao, Jaime Casanova, Simon Riggs, Steven
Singer, Peter Eisentraut
InitXLogInsert() cannot be called in a critical section, because it
allocates memory. But CreateCheckPoint() did that, when called for the
end-of-recovery checkpoint by the startup process.
In the passing, fix the scratch space allocation in InitXLogInsert to go to
the right memory context. Also update the comment at InitXLOGAccess, which
hasn't been totally accurate since hot standby was introduced (in a hot
standby backend, InitXLOGAccess isn't called at backend startup).
Reported by Michael Paquier
Add a new XLOG_FPI_FOR_HINT record type, and use that for full-page images
generated for hint bit updates, when checksums are enabled. The new record
type is replayed exactly the same as XLOG_FPI, but allows them to be tallied
separately e.g. in pg_xlogdump.
Each WAL record now carries information about the modified relation and
block(s) in a standardized format. That makes it easier to write tools that
need that information, like pg_rewind, prefetching the blocks to speed up
recovery, etc.
There's a whole new API for building WAL records, replacing the XLogRecData
chains used previously. The new API consists of XLogRegister* functions,
which are called for each buffer and chunk of data that is added to the
record. The new API also gives more control over when a full-page image is
written, by passing flags to the XLogRegisterBuffer function.
This also simplifies the XLogReadBufferForRedo() calls. The function can dig
the relation and block number from the WAL record, so they no longer need to
be passed as arguments.
For the convenience of redo routines, XLogReader now disects each WAL record
after reading it, copying the main data part and the per-block data into
MAXALIGNed buffers. The data chunks are not aligned within the WAL record,
but the redo routines can assume that the pointers returned by XLogRecGet*
functions are. Redo routines are now passed the XLogReaderState, which
contains the record in the already-disected format, instead of the plain
XLogRecord.
The new record format also makes the fixed size XLogRecord header smaller,
by removing the xl_len field. The length of the "main data" portion is now
stored at the end of the WAL record, and there's a separate header after
XLogRecord for it. The alignment padding at the end of XLogRecord is also
removed. This compansates for the fact that the new format would otherwise
be more bulky than the old format.
Reviewed by Andres Freund, Amit Kapila, Michael Paquier, Alvaro Herrera,
Fujii Masao.
Unlogged relations are reset at the end of crash recovery as they're
only synced to disk during a proper shutdown. Unfortunately that and
later steps can fail, e.g. due to running out of space. This reset
was, up to now performed after marking the database as having finished
crash recovery successfully. As out of space errors trigger a crash
restart that could lead to the situation that not all unlogged
relations are reset.
Once that happend usage of unlogged relations could yield errors like
"could not open file "...": No such file or directory". Luckily
clusters that show the problem can be fixed by performing a immediate
shutdown, and starting the database again.
To fix, just call ResetUnloggedRelations(UNLOGGED_RELATION_INIT)
earlier, before marking the database as having successfully recovered.
Discussion: 20140912112246.GA4984@alap3.anarazel.de
Backpatch to 9.1 where unlogged tables were introduced.
Abhijit Menon-Sen and Andres Freund
This function has a loop which can lead to uninterruptible process
"stalls" (actually infinite loops) when some bugs are triggered. Avoid
that unpleasant situation by adding a check for interrupts in a place
that shouldn't degrade performance in the normal case.
Backpatch to 9.3. Older branches have an identical loop here, but the
aforementioned bugs are only a problem starting in 9.3 so there doesn't
seem to be any point in backpatching any further.
There was a window in RestoreBackupBlock where a page would be zeroed out,
but not yet locked. If a backend pinned and locked the page in that window,
it saw the zeroed page instead of the old page or new page contents, which
could lead to missing rows in a result set, or errors.
To fix, replace RBM_ZERO with RBM_ZERO_AND_LOCK, which atomically pins,
zeroes, and locks the page, if it's not in the buffer cache already.
In stable branches, the old RBM_ZERO constant is renamed to RBM_DO_NOT_USE,
to avoid breaking any 3rd party extensions that might use RBM_ZERO. More
importantly, this avoids renumbering the other enum values, which would
cause even bigger confusion in extensions that use ReadBufferExtended, but
haven't been recompiled.
Backpatch to all supported versions; this has been racy since hot standby
was introduced.
Now that the backup blocks are appended to the WAL record in xloginsert.c,
XLogInsert doesn't see them anymore and cannot remove them from the version
reconstructed for xlog_outdesc. This makes running with wal_debug=on more
expensive, as we now make (unnecessary) temporary copies of the backup
blocks, but it doesn't seem worth convoluting the code to keep that
optimization.
Reported by Alvaro Herrera.
BRIN is a new index access method intended to accelerate scans of very
large tables, without the maintenance overhead of btrees or other
traditional indexes. They work by maintaining "summary" data about
block ranges. Bitmap index scans work by reading each summary tuple and
comparing them with the query quals; all pages in the range are returned
in a lossy TID bitmap if the quals are consistent with the values in the
summary tuple, otherwise not. Normal index scans are not supported
because these indexes do not store TIDs.
As new tuples are added into the index, the summary information is
updated (if the block range in which the tuple is added is already
summarized) or not; in the latter case, a subsequent pass of VACUUM or
the brin_summarize_new_values() function will create the summary
information.
For data types with natural 1-D sort orders, the summary info consists
of the maximum and the minimum values of each indexed column within each
page range. This type of operator class we call "Minmax", and we
supply a bunch of them for most data types with B-tree opclasses.
Since the BRIN code is generalized, other approaches are possible for
things such as arrays, geometric types, ranges, etc; even for things
such as enum types we could do something different than minmax with
better results. In this commit I only include minmax.
Catalog version bumped due to new builtin catalog entries.
There's more that could be done here, but this is a good step forwards.
Loosely based on ideas from Simon Riggs; code mostly by Álvaro Herrera,
with contribution by Heikki Linnakangas.
Patch reviewed by: Amit Kapila, Heikki Linnakangas, Robert Haas.
Testing help from Jeff Janes, Erik Rijkers, Emanuel Calvo.
PS:
The research leading to these results has received funding from the
European Union's Seventh Framework Programme (FP7/2007-2013) under
grant agreement n° 318633.
Previously .ready file was created for the timeline history file at the end
of an archive recovery even when WAL archiving was not enabled.
This creation is unnecessary and causes .ready file to remain infinitely.
This commit changes an archive recovery so that it creates .ready file for
the timeline history file only when WAL archiving is enabled.
Backpatch to all supported versions.
xlog.c is huge, this makes it a little bit smaller, which is nice. Functions
related to putting together the WAL record are in xloginsert.c, and the
lower level stuff for managing WAL buffers and such are in xlog.c.
Also move the definition of XLogRecord to a separate header file. This
causes churn in the #includes of all the files that write WAL records, and
redo routines, but it avoids pulling in xlog.h into most places.
Reviewed by Michael Paquier, Alvaro Herrera, Andres Freund and Amit Kapila.
The old algorithm was found to not be the usual CRC-32 algorithm, used by
Ethernet et al. We were using a non-reflected lookup table with code meant
for a reflected lookup table. That's a strange combination that AFAICS does
not correspond to any bit-wise CRC calculation, which makes it difficult to
reason about its properties. Although it has worked well in practice, seems
safer to use a well-known algorithm.
Since we're changing the algorithm anyway, we might as well choose a
different polynomial. The Castagnoli polynomial has better error-correcting
properties than the traditional CRC-32 polynomial, even if we had
implemented it correctly. Another reason for picking that is that some new
CPUs have hardware support for calculating CRC-32C, but not CRC-32, let
alone our strange variant of it. This patch doesn't add any support for such
hardware, but a future patch could now do that.
The old algorithm is kept around for tsquery and pg_trgm, which use the
values in indexes that need to remain compatible so that pg_upgrade works.
While we're at it, share the old lookup table for CRC-32 calculation
between hstore, ltree and core. They all use the same table, so might as
well.
Instead of initializing a new TransInvalidationInfo for every
transaction or subtransaction, we can just do it for those
transactions or subtransactions that actually need to queue
invalidation messages. That also avoids needing to free those
entries at the end of a transaction or subtransaction that does
not generate any invalidation messages, which is by far the
common case.
Patch by me. Review by Simon Riggs and Andres Freund.
Previously the archive recovery always created .ready file for
the last WAL file of the old timeline at the end of recovery even when
it's restored from the archive and has .done file. That is, there was
the case where the WAL file had both .ready and .done files.
This caused the already-archived WAL file to be archived again.
This commit prevents the archive recovery from creating .ready file
for the last WAL file if it has .done file, in order to prevent it from
being archived again.
This bug was added when cascading replication feature was introduced,
i.e., the commit 5286105800.
So, back-patch to 9.2, where cascading replication was added.
Reviewed by Michael Paquier
The duplication originated in cdd46c765, where restartpoints were
introduced.
In LogCheckpointStart's case the duplication actually lead to the
compiler's format string checking not to be effective because the
format string wasn't constant.
Arguably these messages shouldn't be elog(), but ereport() style
messages. That'd even allow to translate the messages... But as
there's more mistakes of that kind in surrounding code, it seems
better to change that separately.
Commit 7dbb606938 added a new CHECKPOINT_FLUSH_ALL flag. As that
commit needed to be backpatched I didn't change the numeric values of
the existing flags as that could lead to nastly problems if any
external code issued checkpoints. That's not a concern on master, so
renumber them there.
Also add a comment about CHECKPOINT_FLUSH_ALL above
CreateCheckPoint().
CREATE DATABASE and ALTER DATABASE .. SET TABLESPACE copy the source
database directory on the filesystem level. To ensure the on disk
state is consistent they block out users of the affected database and
force a checkpoint to flush out all data to disk. Unfortunately, up to
now, that checkpoint didn't flush out dirty buffers from unlogged
relations.
That bug means there could be leftover dirty buffers in either the
template database, or the database in its old location. Leading to
problems when accessing relations in an inconsistent state; and to
possible problems during shutdown in the SET TABLESPACE case because
buffers belonging files that don't exist anymore are flushed.
This was reported in bug #10675 by Maxim Boguk.
Fix by Pavan Deolasee, modified somewhat by me. Reviewed by MauMau and
Fujii Masao.
Backpatch to 9.1 where unlogged tables were introduced.
I left the GUC in place for the beta period, so that people could experiment
with different values. No-one's come up with any data that a different value
would be better under some circumstances, so rather than try to document to
users what the GUC, let's just hard-code the current value, 8.
As noted in http://bugs.debian.org/763098 there is a conflict between
postgres' definition of CACHE_LINE_SIZE and the definition by various
*bsd platforms. It's debatable who has the right to define such a
name, but postgres' use was only introduced in 375d8526f2 (9.4), so
it seems like a good idea to rename it.
Discussion: 20140930195756.GC27407@msg.df7cb.de
Per complaint of Christoph Berg in the above email, although he's not
the original bug reporter.
Backpatch to 9.4 where the define was introduced.
For the reason outlined in df4077cda2 also remove volatile qualifiers
from xlog.c. Some of these uses of volatile have been added after
noticing problems back when spinlocks didn't imply compiler
barriers. So they are a good test - in fact removing the volatiles
breaks when done without the barriers in spinlocks present.
Several uses of volatile remain where they are explicitly used to
access shared memory without locks. These locations are ok with
slightly out of date data, but removing the volatile might lead to the
variables never being reread from memory. These uses could also be
replaced by barriers, but that's a separate change of doubtful value.
There are four weaknesses in728f152e07f998d2cb4fe5f24ec8da2c3bda98f2:
* append_init() in heapdesc.c was ugly and required that rm_identify
return values are only valid till the next call. Instead just add a
couple more switch() cases for the INIT_PAGE cases. Now the returned
value will always be valid.
* a couple rm_identify() callbacks missed masking xl_info with
~XLR_INFO_MASK.
* pg_xlogdump didn't map a NULL rm_identify to UNKNOWN or a similar
string.
* append_init() was called when id=NULL - which should never actually
happen. But it's better to be careful.
This is primarily useful for the upcoming pg_xlogdump --stats feature,
but also allows to remove some duplicated code in the rmgr_desc
routines.
Due to the separation and harmonization, the output of dipsplayed
records changes somewhat. But since this isn't enduser oriented
content that's ok.
It's potentially desirable to further change pg_xlogdump's display of
records. It previously wasn't possible to show the record type
separately from the description forcing it to be in the last
column. But that's better done in a separate commit.
Author: Abhijit Menon-Sen, slightly editorialized by me
Reviewed-By: Álvaro Herrera, Andres Freund, and Heikki Linnakangas
Discussion: 20140604104716.GA3989@toroid.org
Every redo routine uses the same idiom to determine what to do to a page:
check if there's a backup block for it, and if not read, the buffer if the
block exists, and check its LSN. Refactor that into a common function,
XLogReadBufferForRedo, making all the redo routines shorter and more
readable.
This has no user-visible effect, and makes no changes to the WAL format.
Reviewed by Andres Freund, Alvaro Herrera, Michael Paquier.
strncmp() is a specialized API unsuited for routine copying into
fixed-size buffers. On a system where the length of a single filename
can exceed MAXPGPATH, the pg_archivecleanup change prevents a simple
crash in the subsequent strlen(). Few filesystems support names that
long, and calling pg_archivecleanup with untrusted input is still not a
credible use case. Therefore, no back-patch.
David Rowley
log_newpage is used by many indexams, in addition to heap, but for
historical reasons it's always been part of the heapam rmgr. Starting with
9.3, we have another WAL record type for logging an image of a page,
XLOG_FPI. Simplify things by moving log_newpage and log_newpage_buffer to
xlog.c, and switch to using the XLOG_FPI record type.
Bump the WAL version number because the code to replay the old HEAP_NEWPAGE
records is removed.
Commit 0ac5ad5134 removed an optimization in multixact.c that skipped
fetching members of MultiXactId that were older than our
OldestVisibleMXactId value. The reason this was removed is that it is
possible for multixacts that contain updates to be older than that
value. However, if the caller is certain that the multi does not
contain an update (because the infomask bits say so), it can pass this
info down to GetMultiXactIdMembers, enabling it to use the old
optimization.
Pointed out by Andres Freund in 20131121200517.GM7240@alap2.anarazel.de
Fujii Masao
Tom Lane
Heikki Linnakangas
Bruce Momjian
Andres Freund
Alvaro Herrera
Simon Riggs
Robert Haas
Peter Eisentraut
Noah Misch