Ensure that the invocation command for postgres or pg_ctl runservice
double-quotes the executable's pathname; failure to do this leads to
trouble when the path contains spaces.
Also, ensure that the path ends in ".exe" in both cases and uses
backslashes rather than slashes as directory separators. The latter issue
is reported to confuse some third-party tools such as Symantec Backup Exec.
Also, rewrite the function to avoid buffer overrun issues by using a
PQExpBuffer instead of a fixed-size static buffer. Combinations of
very long executable pathnames and very long data directory pathnames
could have caused trouble before, for example.
Back-patch to all active branches, since this code has been like this
for a long while.
Naoya Anzai and Tom Lane, reviewed by Rajeev Rastogi
The various places that transferred fast-path locks to the main lock table
neglected to release the PGPROC's backendLock if SetupLockInTable failed
due to being out of shared memory. In most cases this is no big deal since
ensuing error cleanup would release all held LWLocks anyway. But there are
some hot-standby functions that don't consider failure of
FastPathTransferRelationLocks to be a hard error, and in those cases this
oversight could lead to system lockup. For consistency, make all of these
places look the same as FastPathTransferRelationLocks.
Noted while looking for the cause of Dan Wood's bugs --- this wasn't it,
but it's a bug anyway.
Prevent handle_sig_alarm from losing control partway through due to a query
cancel (either an asynchronous SIGINT, or a cancel triggered by one of the
timeout handler functions). That would at least result in failure to
schedule any required future interrupt, and might result in actual
corruption of timeout.c's data structures, if the interrupt happened while
we were updating those.
We could still lose control if an asynchronous SIGINT arrives just as the
function is entered. This wouldn't break any data structures, but it would
have the same effect as if the SIGALRM interrupt had been silently lost:
we'd not fire any currently-due handlers, nor schedule any new interrupt.
To forestall that scenario, forcibly reschedule any pending timer interrupt
during AbortTransaction and AbortSubTransaction. We can avoid any extra
kernel call in most cases by not doing that until we've allowed
LockErrorCleanup to kill the DEADLOCK_TIMEOUT and LOCK_TIMEOUT events.
Another hazard is that some platforms (at least Linux and *BSD) block a
signal before calling its handler and then unblock it on return. When we
longjmp out of the handler, the unblock doesn't happen, and the signal is
left blocked indefinitely. Again, we can fix that by forcibly unblocking
signals during AbortTransaction and AbortSubTransaction.
These latter two problems do not manifest when the longjmp reaches
postgres.c, because the error recovery code there kills all pending timeout
events anyway, and it uses sigsetjmp(..., 1) so that the appropriate signal
mask is restored. So errors thrown outside any transaction should be OK
already, and cleaning up in AbortTransaction and AbortSubTransaction should
be enough to fix these issues. (We're assuming that any code that catches
a query cancel error and doesn't re-throw it will do at least a
subtransaction abort to clean up; but that was pretty much required already
by other subsystems.)
Lastly, ProcSleep should not clear the LOCK_TIMEOUT indicator flag when
disabling that event: if a lock timeout interrupt happened after the lock
was granted, the ensuing query cancel is still going to happen at the next
CHECK_FOR_INTERRUPTS, and we want to report it as a lock timeout not a user
cancel.
Per reports from Dan Wood.
Back-patch to 9.3 where the new timeout handling infrastructure was
introduced. We may at some point decide to back-patch the signal
unblocking changes further, but I'll desist from that until we hear
actual field complaints about it.
Although user-defined relations can't be directly created in
pg_catalog, it's possible for them to end up there, because you can
create them in some other schema and then use ALTER TABLE .. SET SCHEMA
to move them there. Previously, such relations couldn't afterwards
be manipulated, because IsSystemRelation()/IsSystemClass() rejected
all attempts to modify objects in the pg_catalog schema, regardless
of their origin. With this patch, they now reject only those
objects in pg_catalog which were created at initdb-time, allowing
most operations on user-created tables in pg_catalog to proceed
normally.
This patch also adds new functions IsCatalogRelation() and
IsCatalogClass(), which is similar to IsSystemRelation() and
IsSystemClass() but with a slightly narrower definition: only TOAST
tables of system catalogs are included, rather than *all* TOAST tables.
This is currently used only for making decisions about when
invalidation messages need to be sent, but upcoming logical decoding
patches will find other uses for this information.
Andres Freund, with some modifications by me.
In the GIN incomplete-splits patch, I used BlockIdDatas to store the block
number of left and right children, when inserting a downlink after a split
to an internal page posting list page. But gin_desc thought they were stored
as BlockNumbers.
We have for a long time checked the head pointer of each of the backend's
proclock lists and skipped acquiring the corresponding locktable partition
lock if the head pointer was NULL. This was safe enough in the days when
proclock lists were changed only by the owning backend, but it is pretty
questionable now that the fast-path patch added cases where backends add
entries to other backends' proclock lists. However, we don't really wish
to revert to locking each partition lock every time, because in simple
transactions that would add a lot of useless lock/unlock cycles on
already-heavily-contended LWLocks. Fortunately, the only way that another
backend could be modifying our proclock list at this point would be if it
was promoting a formerly fast-path lock of ours; and any such lock must be
one that we'd decided not to delete in the previous loop over the locallock
table. So it's okay if we miss seeing it in this loop; we'd just decide
not to delete it again. However, once we've detected a non-empty list,
we'd better re-fetch the list head pointer after acquiring the partition
lock. This guards against possibly fetching a corrupt-but-non-null pointer
if pointer fetch/store isn't atomic. It's not clear if any practical
architectures are like that, but we've never assumed that before and don't
wish to start here. In any case, the situation certainly deserves a code
comment.
While at it, refactor the partition traversal loop to use a for() construct
instead of a while() loop with goto's.
Back-patch, just in case the risk is real and not hypothetical.
Instead of simply checking the KEYS_UPDATED bit, we need to check
whether each lock held on the future version of the tuple conflicts with
the lock we're trying to acquire.
Per bug report #8434 by Tomonari Katsumata
Not doing so causes us to traverse an update chain that has been broken
by concurrent page pruning. All other code that traverses update chains
uses this check as one of the cases in which to stop iterating, so
replicate it here too. Failure to do so leads to erroneous CLOG,
subtrans or multixact lookups.
Per discussion following the bug report by J Smith in
CADFUPgc5bmtv-yg9znxV-vcfkb+JPRqs7m2OesQXaM_4Z1JpdQ@mail.gmail.com
as diagnosed by Andres Freund.
If a transaction updates/deletes a tuple just before aborting, and a
concurrent transaction tries to prune the page concurrently, the pruner
may see HeapTupleSatisfiesVacuum return HEAPTUPLE_DELETE_IN_PROGRESS,
but a later call to HeapTupleGetUpdateXid() return InvalidXid. This
would cause an assertion failure in development builds, but would be
otherwise Mostly Harmless.
Fix by checking whether the updater Xid is valid before trying to apply
it as page prune point.
Reported by Andres in 20131124000203.GA4403@alap2.anarazel.de
The reason for the fetch failure is that the tuple was removed because
it was dead; so the failure is innocuous and can be ignored. Moreover,
there's no need for further work and we can return success to the caller
immediately. EvalPlanQualFetch is doing something very similar to this
already.
Report and test case from Andres Freund in
20131124000203.GA4403@alap2.anarazel.de
When acquiring a lock in fast-path mode, we must reset the locallock
object's lock and proclock fields to NULL. They are not necessarily that
way to start with, because the locallock could be left over from a failed
lock acquisition attempt earlier in the transaction. Failure to do this
led to all sorts of interesting misbehaviors when LockRelease tried to
clean up no-longer-related lock and proclock objects in shared memory.
Per report from Dan Wood.
In passing, modify LockRelease to elog not just Assert if it doesn't find
lock and proclock objects for a formerly fast-path lock, matching the code
in FastPathGetRelationLockEntry and LockRefindAndRelease. This isn't a
bug but it will help in diagnosing any future bugs in this area.
Also, modify FastPathTransferRelationLocks and FastPathGetRelationLockEntry
to break out of their loops over the fastpath array once they've found the
sole matching entry. This was inconsistently done in some search loops
and not others.
Improve assorted related comments, too.
Back-patch to 9.2 where the fast-path mechanism was introduced.
Correct an obsolete statement that no backend touches another backend's
PROCLOCK lists. This was probably wrong even when written (the deadlock
checker looks at everybody's lists), and it's certainly quite wrong now
that fast-path locking can require creation of lock and proclock objects
on behalf of another backend. Also improve some statements in the hot
standby explanation, and do one or two other trivial bits of wordsmithing/
reformatting.
Replace it with an approach similar to what GiST uses: when a page is split,
the left sibling is marked with a flag indicating that the parent hasn't been
updated yet. When the parent is updated, the flag is cleared. If an insertion
steps on a page with the flag set, it will finish split before proceeding
with the insertion.
The post-recovery cleanup mechanism was never totally reliable, as insertion
to the parent could fail e.g because of running out of memory or disk space,
leaving the tree in an inconsistent state.
This also divides the responsibility of WAL-logging more clearly between
the generic ginbtree.c code, and the parts specific to entry and posting
trees. There is now a common WAL record format for insertions and deletions,
which is written by ginbtree.c, followed by tree-specific payload, which is
returned by the placetopage- and split- callbacks.
Separate the insertion payload from the more static portions of GinBtree.
GinBtree now only contains information related to searching the tree, and
the information of what to insert is passed separately.
Add root block number to GinBtree, instead of passing it around all the
functions as argument.
Split off ginFinishSplit() from ginInsertValue(). ginFinishSplit is
responsible for finding the parent and inserting the downlink to it.
I neglected this in the previous commit that updated the plpython2 output,
which I forgot to "git add" earlier.
As pointed out by Rodolfo Campero and Marko Kreen.
Vacuum recognizes that it can update relfrozenxid by checking whether it has
processed all pages of a relation. Unfortunately it performed that check
after truncating the dead pages at the end of the relation, and used the new
number of pages to decide whether all pages have been scanned. If the new
number of pages happened to be smaller or equal to the number of pages
scanned, it incorrectly decided that all pages were scanned.
This can lead to relfrozenxid being updated, even though some pages were
skipped that still contain old XIDs. That can lead to data loss due to xid
wraparounds with some rows suddenly missing. This likely has escaped notice
so far because it takes a large number (~2^31) of xids being used to see the
effect, while a full-table vacuum before that would fix the issue.
The incorrect logic was introduced by commit
b4b6923e03. Backpatch this fix down to 8.4,
like that commit.
Andres Freund, with some modifications by me.
Reviewed-by: Ali Dar <ali.munir.dar@gmail.com>
Reviewed-by: Amit Khandekar <amit.khandekar@enterprisedb.com>
Reviewed-by: Rodolfo Campero <rodolfo.campero@anachronics.com>
variables is varchar. This fixes this test case:
int main(void)
{
exec sql begin declare section;
varchar a[50], b[50];
exec sql end declare section;
return 0;
}
Since varchars are internally turned into custom structs and
the type name is emitted for these variable declarations,
the preprocessed code previously had:
struct varchar_1 { ... } a _,_ struct varchar_2 { ... } b ;
The comma in the generated C file was a syntax error.
There are no regression test changes since it's not exercised.
Patch by Boszormenyi Zoltan <zb@cybertec.at>
Domains over arrays are now converted to/from python lists when passed as
arguments or return values. Like regular arrays.
This has some potential to break applications that rely on the old behavior
that they are passed as strings, but in practice there probably aren't many
such applications out there.
Rodolfo Campero
Change SET LOCAL/CONSTRAINTS/TRANSACTION behavior outside of a
transaction block from error (post-9.3) to warning. (Was nothing in <=
9.3.) Also change ABORT outside of a transaction block from notice to
warning.
ECPG is not supposed to allow and output nested comments in C. These comments
are only allowed in the SQL parts and must not be written into the C file.
Also the different handling of different comments is documented.
Previously, messages were emitted at the LOG level every time a
backend preloaded a library. That was acceptable (though unnecessary)
for shared_preload_libraries; but it was excessive for
local_preload_libraries and session_preload_libraries. Reduce to
DEBUG1.
Also, there was logic in the EXEC_BACKEND case to avoid repeated
messages for shared_preload_libraries by demoting them to
DEBUG2. DEBUG1 seems more appropriate there, as well, so eliminate
that special case.
Peter Geoghegan.
These functions must be careful that they return the intended value of
errno to their callers. There were several scenarios where this might
not happen:
1. The recent SSL renegotiation patch added a hunk of code that would
execute after setting errno. In the first place, it's doubtful that we
should consider renegotiation to be successfully completed after a failure,
and in the second, there's no real guarantee that the called OpenSSL
routines wouldn't clobber errno. Fix by not executing that hunk except
during success exit.
2. errno was left in an unknown state in case of an unrecognized return
code from SSL_get_error(). While this is a "can't happen" case, it seems
like a good idea to be sure we know what would happen, so reset errno to
ECONNRESET in such cases. (The corresponding code in libpq's fe-secure.c
already did this.)
3. There was an (undocumented) assumption that client_read_ended() wouldn't
change errno. While true in the current state of the code, this seems less
than future-proof. Add explicit saving/restoring of errno to make sure
that changes in the called functions won't break things.
I see no need to back-patch, since #1 is new code and the other two issues
are mostly hypothetical.
Per discussion with Amit Kapila.
The previous coding labeled expressions such as pg_index.indkey[1:3] as
being of int2vector type; which is not right because the subscript bounds
of such a result don't, in general, satisfy the restrictions of int2vector.
To fix, implicitly promote the result of slicing int2vector to int2[],
or oidvector to oid[]. This is similar to what we've done with domains
over arrays, which is a good analogy because these types are very much
like restricted domains of the corresponding regular-array types.
A side-effect is that we now also forbid array-element updates on such
columns, eg while "update pg_index set indkey[4] = 42" would have worked
before if you were superuser (and corrupted your catalogs irretrievably,
no doubt) it's now disallowed. This seems like a good thing since, again,
some choices of subscripting would've led to results not satisfying the
restrictions of int2vector. The case of an array-slice update was
rejected before, though with a different error message than you get now.
We could make these cases work in future if we added a cast from int2[]
to int2vector (with a cast function checking the subscript restrictions)
but it seems unlikely that there's any value in that.
Per report from Ronan Dunklau. Back-patch to all supported branches
because of the crash risks involved.
If logging is enabled, either ereport() or fprintf() might stomp on errno
internally, causing this function to return the wrong result. That might
only end in a misleading error report, but in any code that's examining
errno to decide what to do next, the consequences could be far graver.
This has been broken since the very first version of this file in 2006
... it's a bit astonishing that we didn't identify this long ago.
Reported by Amit Kapila, though this isn't his proposed fix.
Two call sites were apparently thinking that the last argument of
SPI_execute_plan() is the number of query parameters, but it is actually
the row limit. Change the calls to 0, since we don't care about the
limit there. The previous code didn't break anything, but it was still
wrong.
A pointer to a C string was treated as a pointer to a "name" datum and
passed to SPI_execute_plan(). This pointer would then end up being
passed through datumCopy(), which would try to copy the entire 64 bytes
of name data, thus running past the end of the C string. Fix by
converting the string to a proper name structure.
Found by LLVM AddressSanitizer.
pullup_replace_vars()'s decisions about whether a pulled-up replacement
expression needs to be wrapped in a PlaceHolderVar depend on the assumption
that what looks like a Var behaves like a Var. However, if the Var is a
join alias reference, later flattening of join aliases might replace the
Var with something that's not a Var at all, and should have been wrapped.
To fix, do a forcible pass of flatten_join_alias_vars() on the subquery
targetlist before we start to copy items out of it. We'll re-run that
processing on the pulled-up expressions later, but that's harmless.
Per report from Ken Tanzer; the added regression test case is based on his
example. This bug has been there since the PlaceHolderVar mechanism was
invented, but has escaped detection because the circumstances that trigger
it are fairly narrow. You need a flattenable query underneath an outer
join, which contains another flattenable query inside a join of its own,
with a dangerous expression (a constant or something else non-strict)
in that one's targetlist.
Having seen this, I'm wondering if it wouldn't be prudent to do all
alias-variable flattening earlier, perhaps even in the rewriter.
But that would probably not be a back-patchable change.
These bugs can cause data loss on standbys started with hot_standby=on at
the moment they start to accept read only queries, by marking committed
transactions as uncommited. The likelihood of such corruptions is small
unless the primary has a high transaction rate.
5a031a5556 fixed bugs in HS's startup logic
by maintaining less state until at least STANDBY_SNAPSHOT_PENDING state
was reached, missing the fact that both clog and subtrans are written to
before that. This only failed to fail in common cases because the usage
of ExtendCLOG in procarray.c was superflous since clog extensions are
actually WAL logged.
f44eedc3f0f347a856eea8590730769125964597/I then tried to fix the missing
extensions of pg_subtrans due to the former commit's changes - which are
not WAL logged - by performing the extensions when switching to a state
> STANDBY_INITIALIZED and not performing xid assignments before that -
again missing the fact that ExtendCLOG is unneccessary - but screwed up
twice: Once because latestObservedXid wasn't updated anymore in that
state due to the earlier commit and once by having an off-by-one error in
the loop performing extensions. This means that whenever a
CLOG_XACTS_PER_PAGE (32768 with default settings) boundary was crossed
between the start of the checkpoint recovery started from and the first
xl_running_xact record old transactions commit bits in pg_clog could be
overwritten if they started and committed in that window.
Fix this mess by not performing ExtendCLOG() in HS at all anymore since
it's unneeded and evidently dangerous and by performing subtrans
extensions even before reaching STANDBY_SNAPSHOT_PENDING.
Analysis and patch by Andres Freund. Reported by Christophe Pettus.
Backpatch down to 9.0, like the previous commit that caused this.
RecoveryIsInProgress() can be called very frequently. During normal
operation, it just checks a backend-local variable and returns quickly,
but during hot standby, it checks a spinlock-protected shared variable.
Those spinlock acquisitions can become a point of contention on a busy
hot standby system.
Replace the spinlock acquisition with a memory barrier.
Per discussion with Andres Freund, Ants Aasma and Merlin Moncure.
This patch adds the ability to write TABLE( function1(), function2(), ...)
as a single FROM-clause entry. The result is the concatenation of the
first row from each function, followed by the second row from each
function, etc; with NULLs inserted if any function produces fewer rows than
others. This is believed to be a much more useful behavior than what
Postgres currently does with multiple SRFs in a SELECT list.
This syntax also provides a reasonable way to combine use of column
definition lists with WITH ORDINALITY: put the column definition list
inside TABLE(), where it's clear that it doesn't control the ordinality
column as well.
Also implement SQL-compliant multiple-argument UNNEST(), by turning
UNNEST(a,b,c) into TABLE(unnest(a), unnest(b), unnest(c)).
The SQL standard specifies TABLE() with only a single function, not
multiple functions, and it seems to require an implicit UNNEST() which is
not what this patch does. There may be something wrong with that reading
of the spec, though, because if it's right then the spec's TABLE() is just
a pointless alternative spelling of UNNEST(). After further review of
that, we might choose to adopt a different syntax for what this patch does,
but in any case this functionality seems clearly worthwhile.
Andrew Gierth, reviewed by Zoltán Böszörményi and Heikki Linnakangas, and
significantly revised by me
Previously, -d option for pg_isready was broken. When the name of the
database was specified by -d option, pg_isready failed with an error.
When the conninfo specified by -d option contained the setting of the
host name but not Numeric IP address (i.e., hostaddr), pg_isready
displayed wrong connection message. -d option could not handle a valid
URI prefix at all. This commit fixes these bugs of pg_isready.
Backpatch to 9.3, where pg_isready was introduced.
Per report from Josh Berkus and Robert Haas.
Original patch by Fabrízio de Royes Mello, heavily modified by me.
Split off the portion of ginInsertValue that inserts the tuple to current
level into a separate function, ginPlaceToPage. ginInsertValue's charter
is now to recurse up the tree to insert the downlink, when a page split is
required.
This is in preparation for a patch to change the way incomplete splits are
handled, which will need to do these operations separately. And IMHO makes
the code more readable anyway.
This creates a new gin-btree callback function for creating a downlink for
a page. Previously, ginxlog.c duplicated the logic used during normal
operation.
Previously, if VACUUM skipped vacuuming a page because it's pinned, it
didn't count that page as scanned. However, that meant that relfrozenxid
was not bumped up either, which prevented anti-wraparound vacuum from
doing its job.
Report by Миша Тюрин, analysis and patch by Sergey Burladyn and Jeff Janes.
Backpatch to 9.2, where the skip-locked-pages behavior was introduced.
This patch improves performance of most built-in aggregates that formerly
used a NUMERIC or NUMERIC array as their transition type; this includes
not only aggregates on numeric inputs, but some aggregates on integer
inputs where overflow of an int8 value is a possibility. The code now
uses a special-purpose data structure to avoid array construction and
deconstruction overhead, as well as packing and unpacking overhead for
numeric values.
These aggregates' transition type is now declared as INTERNAL, since
it doesn't correspond to any SQL data type. To keep the planner from
thinking that that means a lot of storage will be used, we make use
of the just-added pg_aggregate.aggtransspace feature. The space estimate
is set to 128 bytes, which is at least in the right ballpark.
Hadi Moshayedi, reviewed by Pavel Stehule and Tomas Vondra
Formerly the planner had a hard-wired rule of thumb for guessing the amount
of space consumed by an aggregate function's transition state data. This
estimate is critical to deciding whether it's OK to use hash aggregation,
and in many situations the built-in estimate isn't very good. This patch
adds a column to pg_aggregate wherein a per-aggregate estimate can be
provided, overriding the planner's default, and infrastructure for setting
the column via CREATE AGGREGATE.
It may be that additional smarts will be required in future, perhaps even
a per-aggregate estimation function. But this is already a step forward.
This is extracted from a larger patch to improve the performance of numeric
and int8 aggregates. I (tgl) thought it was worth reviewing and committing
this infrastructure separately. In this commit, all built-in aggregates
are given aggtransspace = 0, so no behavior should change.
Hadi Moshayedi, reviewed by Pavel Stehule and Tomas Vondra
A couple of places that should have been iterating over WORDS_PER_CHUNK
words were iterating over WORDS_PER_PAGE words instead. This thinko
accidentally failed to fail, because (at least on common architectures
with default BLCKSZ) WORDS_PER_CHUNK is a bit less than WORDS_PER_PAGE,
and the extra words being looked at were always zero so nothing happened.
Still, it's a bug waiting to happen if anybody ever fools with the
parameters affecting TIDBitmap sizes, and it's a small waste of cycles
too. So back-patch to all active branches.
Etsuro Fujita
In --inserts and especially --column-inserts mode, we can get a useful
speedup by generating the common prefix of all a table's INSERT commands
just once, and then printing the prebuilt string for each row. This avoids
multiple invocations of fmtId() and other minor fooling around.
David Rowley
The previous coding was fairly unreadable and drew double-free warnings
from clang. I believe the double free was actually not reachable, because
PQconnectionNeedsPassword is coded to not return true if a password was
provided, so that the loop can't iterate more than twice. Nonetheless
it seems worth rewriting. No back-patch since this is just cosmetic.
Bug #8591 from Claudio Freire demonstrates that get_eclass_for_sort_expr
must be able to compute valid em_nullable_relids for any new equivalence
class members it creates. I'd worried about this in the commit message
for db9f0e1d9a, but claimed that it wasn't a
problem because multi-member ECs should already exist when it runs. That
is transparently wrong, though, because this function is also called by
initialize_mergeclause_eclasses, which runs during deconstruct_jointree.
The example given in the bug report (which the new regression test item
is based upon) fails because the COALESCE() expression is first seen by
initialize_mergeclause_eclasses rather than process_equivalence.
Fixing this requires passing the appropriate nullable_relids set to
get_eclass_for_sort_expr, and it requires new code to compute that set
for top-level expressions such as ORDER BY, GROUP BY, etc. We store
the top-level nullable_relids in a new field in PlannerInfo to avoid
computing it many times. In the back branches, I've added the new
field at the end of the struct to minimize ABI breakage for planner
plugins. There doesn't seem to be a good alternative to changing
get_eclass_for_sort_expr's API signature, though. There probably aren't
any third-party extensions calling that function directly; moreover,
if there are, they probably need to think about what to pass for
nullable_relids anyway.
Back-patch to 9.2, like the previous patch in this area.
plpgsql likes to cache query plans and simple-expression execution state
trees across calls. This is a considerable win for multiple executions
of the same function. However, it's useless for DO blocks, since by
definition those are executed only once and discarded. Nonetheless,
we were allowing a DO block's expression execution trees to survive
until end of transaction, resulting in a significant intra-transaction
memory leak, as reported by Yeb Havinga. Worse, if the DO block exited
with an error, the compiled form of the block's code was leaked till
end of session --- along with subsidiary plancache entries.
To fix, make DO blocks keep their expression execution trees in a private
EState that's deleted at exit from the block, and add a PG_TRY block
to plpgsql_inline_handler to make sure that memory cleanup happens
even on error exits. Also add a regression test covering error handling
in a DO block, because my first try at this broke that. (The test is
not meant to prove that we don't leak memory anymore, though it could
be used for that with a much larger loop count.)
Ideally we'd back-patch this into all versions supporting DO blocks;
but the patch needs to add a field to struct PLpgSQL_execstate, and that
would break ABI compatibility for third-party plugins such as the plpgsql
debugger. Given the small number of complaints so far, fixing this in
HEAD only seems like an acceptable choice.
Commit 061b88c732 saved argv0 to a
global buffer without ensuring that it was zero terminated,
allowing references to it to overrun the buffer and access other
memory. This probably would not have presented any security risk,
but could have resulted in very confusing failures if the path to
the executable was very long.
Reported by David Rowley
pg_index.indisreplident had at one time in its development been called
indisidentity. describe.c got missed when it was renamed.
Bug introduced in commit 07cacba983.
Andres Freund
The old code entered a new hash table entry first, then scanned
pg_class to determine what value to fill in, and then populated the
entry. This fails to work properly if a cache invalidation happens
as a result of opening pg_class. Repair.
Along the way, get rid of the idea of blowing away the entire hash
table as a method of processing invalidations. Instead, just delete
all the entries one by one. This is probably not quite as cheap but
it's simpler, and shouldn't happen often.
Andres Freund
It's a trivial amount of RAM held until the end of the regression
test run; but it's probably worth fixing to silence future warnings
from code analyzers.
This was the only memory leak pointed out by clang's static code
analysis tool.
The root page is filled with as many items as fit, and the rest are inserted
using normal insertions. However, I fumbled the variable names, and the code
actually memcpy'd all the items on the page, overflowing the buffer. While
at it, rename the variable to make the distinction more clear.
Reported by Teodor Sigaev. This bug was introduced by my recent
refactorings, so no backpatching required.
We can't search for the isolationtester binary until after we've set
up the environment, because otherwise when find_other_exec() tries
to invoke it with the -V option, it might fail for inability to
locate a working libpq. So postpone that step.
Andres Freund
Simple oversight in commit 1cb108efb0 ---
recursively examining a subquery output column is only sane if the
original Var refers to a single output column. Found by Kevin Grittner.
The pretty-printing logic in ruleutils.c operates by inserting a newline
and some indentation whitespace into strings that are already valid SQL.
This naturally results in leaving some trailing whitespace before the
newline in many cases; which can be annoying when processing the output
with other tools, as complained of by Joe Abbate. We can fix that in
a pretty localized fashion by deleting any trailing whitespace before
we append a pretty-printing newline. In addition, we have to modify the
code inserted by commit 2f582f76b1 so that
we also delete trailing whitespace when transposing items from temporary
buffers into the main result string, when a temporary item starts with a
newline.
This results in rather voluminous changes to the regression test results,
but it's easily verified that they are only removal of trailing whitespace.
Back-patch to 9.3, because the aforementioned commit resulted in many
more cases of trailing whitespace than had occurred in earlier branches.
Although the SQL spec forbids duplicate table aliases, historically
we've allowed queries like
SELECT ... FROM tab1 x CROSS JOIN (tab2 x CROSS JOIN tab3 y) z
on the grounds that the aliased join (z) hides the aliases within it,
therefore there is no conflict between the two RTEs named "x". The
LATERAL patch broke this, on the misguided basis that "x" could be
ambiguous if tab3 were a LATERAL subquery. To avoid breaking existing
queries, it's better to allow this situation and complain only if
tab3 actually does contain an ambiguous reference. We need only remove
the check that was throwing an error, because the column lookup code
is already prepared to handle ambiguous references. Per bug #8444.
This is a similar fix as c6ec8793aa
9.2. This should never happen in 9.3 and newer since the special case
cannot happen there, but this patch synchronizes up the code so there
is no confusion on why they're different. An empty block is as harmless
in 9.3 as it was in 9.2, and can safely be ignored.
Commit 9b4d52f209 failed to notice
that pg_regress_ecpg needed updating.
This patch was independently submitted by both David Rowley
and Andres Freund.
If a page is deleted, and reused for something else, just as a search is
following a rightlink to it from its left sibling, the search would continue
scanning whatever the new contents of the page are. That could lead to
incorrect query results, or even something more curious if the page is
reused for a different kind of a page.
To fix, modify the search algorithm to lock the next page before releasing
the previous one, and refrain from deleting pages from the leftmost branch
of the tree.
Add a new Concurrency section to the README, explaining why this works.
There is a lot more one could say about concurrency in GIN, but that's for
another patch.
Backpatch to all supported versions.
Pending patches for logical replication will use this to determine
which columns of a tuple ought to be considered as its candidate key.
Andres Freund, with minor, mostly cosmetic adjustments by me
This change prevents us from doing inappropriate subquery flattening in
cases such as dangerous functions hidden inside a sub-SELECT in the
targetlist of another sub-SELECT. That could result in unexpected behavior
due to multiple evaluations of a volatile function, as in a recent
complaint from Etienne Dube. It's been questionable from the very
beginning whether these functions should look into subqueries (as noted in
their comments), and this case seems to provide proof that they should.
Because the new code only descends into SubLinks, not SubPlans or
InitPlans, the change only affects the planner's behavior during
prepjointree processing and not later on --- for example, you can still get
it to use a volatile function in an indexqual if you wrap the function in
(SELECT ...). That's a historical behavior, for sure, but it's reasonable
given that the executor's evaluation rules for subplans don't depend on
whether there are volatile functions inside them. In any case, we need to
constrain the behavioral change as narrowly as we can to make this
reasonable to back-patch.
contain_volatile_functions() is best applied to the output of
expression_planner(), not its input, so that insertion of function
default arguments and constant-folding have been done. (See comments
at CheckMutability, for instance.) It's perhaps unlikely that anyone
will notice a difference in practice, but still we should do it properly.
In passing, change variable type from Node* to Expr* to reduce the net
number of casts needed.
Noted while perusing uses of contain_volatile_functions().
ExecBuildSlotValueDescription() printed "null" for each dropped column in
a row being complained of by ExecConstraints(). This has some sanity in
terms of the underlying implementation, but is of course pretty surprising
to users. To fix, we must pass the target relation's descriptor to
ExecBuildSlotValueDescription(), because the slot descriptor it had been
using doesn't get labeled with attisdropped markers.
Per bug #8408 from Maxim Boguk. Back-patch to 9.2 where the feature of
printing row values in NOT NULL and CHECK constraint violation messages
was introduced.
Michael Paquier and Tom Lane
Before jamming a desired targetlist into a plan node, one really ought to
make sure the plan node can handle projections, and insert a buffering
Result plan node if not. planagg.c forgot to do this, which is a hangover
from the days when it only dealt with IndexScan plan types. MergeAppend
doesn't project though, not to mention that it gets unhappy if you remove
its possibly-resjunk sort columns. The code accidentally failed to fail
for cases in which the min/max argument was a simple Var, because the new
targetlist would be equivalent to the original "flat" tlist anyway.
For any more complex case, it's been broken since 9.1 where we introduced
the ability to optimize min/max using MergeAppend, as reported by Raphael
Bauduin. Fix by duplicating the logic from grouping_planner that decides
whether we need a Result node.
In 9.2 and 9.1, this requires back-porting the tlist_same_exprs() function
introduced in commit 4387cf956b, else we'd
uselessly add a Result node in cases that worked before. It's rather
tempting to back-patch that whole commit so that we can avoid extra Result
nodes in mainline cases too; but I'll refrain, since that code hasn't
really seen all that much field testing yet.
glibc, at least, is capable of returning "???" instead of anything useful
if it doesn't like the setting of LC_CTYPE. If this happens, or in the
previously-known case of strerror() returning an empty string, try to
print the C macro name for the error code ("EACCES" etc). Only if we
don't have the error code in our compiled-in list of popular error codes
(which covers most though not quite all of what's called out in the POSIX
spec) will we fall back to printing a numeric error code. This should
simplify debugging.
Note that this functionality is currently only provided for %m in backend
ereport/elog messages. That may be sufficient, since we don't fool with the
locale environment in frontend clients, but it's foreseeable that we might
want similar code in libpq for instance.
There was some talk of back-patching this, but let's see how the buildfarm
likes it first. It seems likely that at least some of the POSIX-defined
error code symbols don't exist on all platforms. I don't want to clutter
the entire list with #ifdefs, but we may need more than are here now.
MauMau, edited by me
These things didn't work because the planner omitted to do the necessary
preprocessing of a WindowFunc's argument list. Add the few dozen lines
of code needed to handle that.
Although this sounds like a feature addition, it's really a bug fix because
the default-argument case was likely to crash previously, due to lack of
checking of the number of supplied arguments in the built-in window
functions. It's not a security issue because there's no way for a
non-superuser to create a window function definition with defaults that
refers to a built-in C function, but nonetheless people might be annoyed
that it crashes rather than producing a useful error message. So
back-patch as far as the patch applies easily, which turns out to be 9.2.
I'll put a band-aid in earlier versions as a separate patch.
(Note that these features still don't work for aggregates, and fixing that
case will be harder since we represent aggregate arg lists as target lists
not bare expression lists. There's no crash risk though because CREATE
AGGREGATE doesn't accept defaults, and we reject named-argument notation
when parsing an aggregate call.)
Early close became apparent when invalidation messages were
processed in a new location under CLOBBER_CACHE_ALWAYS builds, due
to additional locking.
Back-patch to 9.3
Merge the isEnoughSpace and placeToPage functions in the b-tree interface
into one function that tries to put a tuple on page, and returns false if
it doesn't fit.
Move createPostingTree function to gindatapage.c, and change its contract
so that it can be passed more items than fit on the root page. It's in a
better position than the callers to know how many items fit.
Move ginMergeItemPointers out of gindatapage.c, into a separate file.
These changes make no difference now, but reduce the footprint of Alexander
Korotkov's upcoming patch to pack item pointers more tightly.
For rather inscrutable reasons, SQL:2008 disallows copying-and-modifying a
window definition that has any explicit framing clause. The error message
we gave for this only made sense if the referencing window definition
itself contains an explicit framing clause, which it might well not.
Moreover, in the context of an OVER clause it's not exactly obvious that
"OVER (windowname)" implies copy-and-modify while "OVER windowname" does
not. This has led to multiple complaints, eg bug #5199 from Iliya
Krapchatov. Change to a hopefully more intelligible error message, and
in the case where we have just "OVER (windowname)", add a HINT suggesting
that omitting the parentheses will fix it. Also improve the related
documentation. Back-patch to all supported branches.
The previous commit was intended to make psql show the full path name when
doing a \s (history save), but it was very badly implemented and would show
confusing if not outright wrong information in many situations; for
instance if the path name given to \s is absolute, or if \cd commands
involving relative paths have been issued. Consensus seems to be that
we don't especially need this functionality in \s, and certainly not in \s
alone. So revert rather than trying to fix it up. Per gripe from
Ian Barwick.
Although the bogus behavior exists in all supported versions, I'm not
back-patching, because the work created for translators (by change of
a translatable message) would probably outweigh the value of what is
after all a mostly-cosmetic change.
The relation should not be accessible to any other process, but it
should be locked for consistency. Since this is not known to
cause any bug, it will not be back-patch, at least for now.
Per report from Andres Freund
Constant quals aren't handled the same way they used to be. Also,
add mention of a couple more major steps in grouping_planner.
Per complaint a couple months back from Etsuro Fujita.
The parsing of WAL filenames of segments larger than > 255 was broken,
making pg_receivexlog unable to restart streaming after stopping it.
The bug was introduced by the changes in 9.3 to represent WAL segment number
as a 64-bit integer instead of two ints, log and seg. To fix, replace the
plain sscanf call with XLogFromFileName macro, which does the conversion
from log+seg to a 64-bit integer correcly.
Reported by Mika Eloranta.
Historically, printtup() has assumed that it could prevent memory leakage
by pfree'ing the string result of each output function and manually
managing detoasting of toasted values. This amounts to assuming that
datatype output functions never leak any memory internally; an assumption
we've already decided to be bogus elsewhere, for example in COPY OUT.
range_out in particular is known to leak multiple kilobytes per call, as
noted in bug #8573 from Godfried Vanluffelen. While we could go in and fix
that leak, it wouldn't be very notationally convenient, and in any case
there have been and undoubtedly will again be other leaks in other output
functions. So what seems like the best solution is to run the output
functions in a temporary memory context that can be reset after each row,
as we're doing in COPY OUT. Some quick experimentation suggests this is
actually a tad faster than the retail pfree's anyway.
This patch fixes all the variants of printtup, except for debugtup()
which is used in standalone mode. It doesn't seem worth worrying
about query-lifespan leaks in standalone mode, and fixing that case
would be a bit tedious since debugtup() doesn't currently have any
startup or shutdown functions.
While at it, remove manual detoast management from several other
output-function call sites that had copied it from printtup(). This
doesn't make a lot of difference right now, but in view of recent
discussions about supporting "non-flattened" Datums, we're going to
want that code gone eventually anyway.
Back-patch to 9.2 where range_out was introduced. We might eventually
decide to back-patch this further, but in the absence of known major
leaks in older output functions, I'll refrain for now.
Since the query has not been freshly parsed when executing REFRESH
MATERIALIZED VIEW, locks must be explicitly taken before rewrite.
Backpatch to 9.3.
Andres Freund
A subquery reference to a matview should be allowed by CREATE
MATERIALIZED VIEW WITH NO DATA, just like a direct reference is.
Per bug report from Laurent Sartran.
Backpatch to 9.3.
The original coding thought this case was impossible, but it can happen
if the bgwriter or checkpointer processes decide to write out an index
page while creation is still proceeding, leading to a bogus "unexpected
spgdoinsert() failure" error. Problem reported by Jonathan S. Katz.
Teodor Sigaev
Callers expect that they only have to set the right resource owner when
creating a BufFile, not during subsequent operations on it. While we could
insist this be fixed at the caller level, it seems more sensible for the
BufFile to take care of it. Without this, some temp files belonging to
a BufFile can go away too soon, eg at the end of a subtransaction,
leading to errors or crashes.
Reported and fixed by Andres Freund. Back-patch to all active branches.
These variables no longer have any useful purpose, since there's no reason
to special-case brute force timezones now that we have a valid
session_timezone setting for them. Remove the variables, and remove the
SET/SHOW TIME ZONE code that deals with them.
The user-visible impact of this is that SHOW TIME ZONE will now show a
POSIX-style zone specification, in the form "<+-offset>-+offset", rather
than an interval value when a brute-force zone has been set. While perhaps
less intuitive, this is a better definition than before because it's
actually possible to give that string back to SET TIME ZONE and get the
same behavior, unlike what used to happen.
We did not previously mention the angle-bracket syntax when describing
POSIX timezone specifications; add some documentation so that people
can figure out what these strings do. (There's still quite a lot of
undocumented functionality there, but anybody who really cares can
go read the POSIX spec to find out about it. In practice most people
seem to prefer Olsen-style city names anyway.)
The only remaining places where we actually look at CTimeZone/HasCTZSet
are abstime2tm() and timestamp2tm(). Now that session_timezone is always
valid, we can remove these special cases. The caller-visible impact of
this is that these functions now always return a valid zone abbreviation
if requested, whereas before they'd return a NULL pointer if a brute-force
timezone was in use. In the existing code, the only place I can find that
changes behavior is to_char(), whose TZ format code will now print
something useful rather than nothing for such zones. (In the places where
the returned zone abbreviation is passed to EncodeDateTime, the lack of
visible change is because we've chosen the abbreviation used for these
zones to match what EncodeTimezone would have printed.)
It's likely that there is now a fair amount of removable dead code around
the call sites, namely anything that's meant to cope with getting a NULL
timezone abbreviation, but I've not made an effort to root that out.
This could be back-patched if we decide we'd like to fix to_char()'s
behavior in the back branches, but there doesn't seem to be much
enthusiasm for that at present.
Formerly, when using a SQL-spec timezone setting with a fixed GMT offset
(called a "brute force" timezone in the code), the session_timezone
variable was not updated to match the nominal timezone; rather, all code
was expected to ignore session_timezone if HasCTZSet was true. This is
of course obviously fragile, though a search of the code finds only
timeofday() failing to honor the rule. A bigger problem was that
DetermineTimeZoneOffset() supposed that if its pg_tz parameter was
pointer-equal to session_timezone, then HasCTZSet should override the
parameter. This would cause datetime input containing an explicit zone
name to be treated as referencing the brute-force zone instead, if the
zone name happened to match the session timezone that had prevailed
before installing the brute-force zone setting (as reported in bug #8572).
The same malady could affect AT TIME ZONE operators.
To fix, set up session_timezone so that it matches the brute-force zone
specification, which we can do using the POSIX timezone definition syntax
"<abbrev>offset", and get rid of the bogus lookaside check in
DetermineTimeZoneOffset(). Aside from fixing the erroneous behavior in
datetime parsing and AT TIME ZONE, this will cause the timeofday() function
to print its result in the user-requested time zone rather than some
previously-set zone. It might also affect results in third-party
extensions, if there are any that make use of session_timezone without
considering HasCTZSet, but in all cases the new behavior should be saner
than before.
Back-patch to all supported branches.
Apparently, shifts greater than or equal to the width of the type
are undefined, and can surprisingly produce a non-zero value.
Amit Kapila, with a comment by me.
The C and POSIX standards state that strncpy's behavior is undefined when
source and destination areas overlap. While it remains dubious whether any
implementations really misbehave when the pointers are exactly equal, some
platforms are now starting to force the issue by complaining when an
undefined call occurs. (In particular OS X 10.9 has been seen to dump core
here, though the exact set of circumstances needed to trigger that remain
elusive. Similar behavior can be expected to be optional on Linux and
other platforms in the near future.) So tweak the code to explicitly do
nothing when nothing need be done.
Back-patch to all active branches. In HEAD, this also lets us get rid of
an exception in valgrind.supp.
Per discussion of a report from Matthias Schmitt.
SGML documentation, as well as code comments, failed to note that an FDW's
validator will be applied to foreign-table options for foreign tables using
the FDW.
Etsuro Fujita
With these, one need no longer manipulate large object descriptors and
extract numeric constants from header files in order to read and write
large object contents from SQL.
Pavel Stehule, reviewed by Rushabh Lathia.
The rules regression test prints all known views and rules, which is a set
that changes regularly. Previously, a change in one rule would frequently
lead to whitespace changes across the entire output of this query, which is
painful to verify and causes undesirable conflicts between unrelated patch
sets. Use \a mode to improve matters. Also use \t mode to suppress the
total-rows count, which was also a source of unnecessary patch conflicts.
Likewise modify the output mode for the list of indexed tables generated
in sanity_check.sql. There might be other places where we should use this
idea, but these are the ones that have caused the most problems.
Andres Freund
When using a C99-compliant vsnprintf, we can use its report of the required
buffer size to avoid making multiple loops through the formatting logic.
This is similar to the changes recently made in stringinfo.c, but we can't
use psprintf.c here because in libpq we don't want to exit() on error.
(The behavior pqexpbuffer.c has historically used is to mark the
PQExpBuffer as "broken", ie empty, if it runs into any fatal problem.)
To avoid duplicating code more than necessary, I refactored
printfPQExpBuffer and appendPQExpBuffer to share a subroutine that's
very similar to psprintf.c's pvsnprintf in spirit.
It's not entirely clear why some PPC machines are generating -0 here, since
the underlying computation should be exactly 0 - 0. Perhaps there's some
wider-than-nominal-precision calculations happening? Anyway, the best way
to avoid platform-dependent results seems to be to explicitly reset -0 to
regular zero.
This reverts commit a0a546f0d9.
It seems better to tweak the code to suppress -0 results during
line_construct_pts(), which I'll do in the next commit.
This prevents the recently-added probe for shm_open() from crashing
on platforms that are impolite enough to deliver a signal rather than
returning ENOSYS for an unimplemented kernel call. At least on the
one known example (HPUX 10.20), ignoring SIGSYS does result in the
desired behavior of getting an ENOSYS error return instead.
Per discussion, we might later wish to do this in the backend as well,
but for now it seems sufficient to do it in initdb.
When we are using a C99-compliant vsnprintf implementation (which should be
most places, these days) it is worth the trouble to make use of its report
of how large the buffer needs to be to succeed. This patch adjusts
stringinfo.c and some miscellaneous usages in pg_dump to do that, relying
on the logic recently added in libpgcommon's psprintf.c. Since these
places want to know the number of bytes written once we succeed, modify the
API of pvsnprintf() to report that.
There remains near-duplicate logic in pqexpbuffer.c, but since that code
is in libpq, psprintf.c's approach of exit()-on-error isn't appropriate
for use there. Also note that I didn't bother touching the multitude
of places that call (v)snprintf without any attempt to provide a resizable
buffer.
Release-note-worthy incompatibility: the API of appendStringInfoVA()
changed. If there's any third-party code that's calling that directly,
it will need tweaking along the same lines as in this patch.
David Rowley and Tom Lane
When a backend process is forked, we initialize the system's random number
generator with srandom(). The seed used is derived from the backend's pid
and the timestamp. However, we only used the microseconds part of the
timestamp, and it was XORed with the pid, so the total range of different
seed values chosen was 0-999999. That's quite limited.
Change the code to also use the seconds part of the timestamp in the seed,
and shift the microseconds so that all 32 bits of the seed are used.
Honza Horak
The absolute path to config file was not pfreed. There are probably more
small leaks here and there in the config file reload code and assign hooks,
and in practice no-one reloads the config files frequently enough for it to
be a problem, but this one is trivial enough that might as well fix it.
Backpatch to 9.3 where the leak was introduced.
Since an increasing number of views and foreign tables are now able
to be updated, complete with any table, view, or foreign table in
the relevant contexts. This avoids the need to use a complex
query that may be both confusing to end-users and nonperformant
to construct the list of possible completions.
Dean Rasheed, persuant to a complaint from Bernd Helme and a
suggestion from Peter Eisentraut
Use a critical section when setting the all-visible flag on an empty page,
and WAL-logging it. log_newpage_buffer() contains an assertion that it
must be called inside a critical section, and it's the right thing to do
when modifying a buffer anyway.
Also, the page should be marked dirty before calling log_newpage_buffer(),
per the comment in log_newpage_buffer() and src/backend/access/transam/README.
Patch by Andres Freund, in response to my report. Backpatch to 9.2, like
the patch that introduced these bugs (a6370fd9).
To wit,
bgworker.c: In function `RegisterDynamicBackgroundWorker':
bgworker.c:761: warning: `generation' might be used uninitialized in this function
dsm_impl.c: In function `dsm_impl_op':
dsm_impl.c:197: warning: control reaches end of non-void function
Neither of these represent actual bugs, but we may as well tweak the code
so that more compilers can tell that. This won't change the generated code
on compilers that do recognize that the cases are unreachable.
asprintf(), aside from not being particularly portable, has a fundamentally
badly-designed API; the psprintf() function that was added in passing in
the previous patch has a much better API choice. Moreover, the NetBSD
implementation that was borrowed for the previous patch doesn't work with
non-C99-compliant vsnprintf, which is something we still have to cope with
on some platforms; and it depends on va_copy which isn't all that portable
either. Get rid of that code in favor of an implementation similar to what
we've used for many years in stringinfo.c. Also, move it into libpgcommon
since it's not really libpgport material.
I think this patch will be enough to turn the buildfarm green again, but
there's still cosmetic work left to do, namely get rid of pg_asprintf()
in favor of using psprintf(). That will come in a followon patch.
This avoids an assumption about the signed number representation. It is
anticipated to have no functional changes on supported configurations;
many two's complement assumptions remain elsewhere.
Per a suggestion from Andres Freund.
Previously, unless all columns were auto-updateable, we wouldn't
inserts, updates, or deletes, or at least not without a rule or trigger;
now, we'll allow inserts and updates that target only the auto-updateable
columns, and deletes even if there are no auto-updateable columns at
all provided the view definition is otherwise suitable.
Dean Rasheed, reviewed by Marko Tiikkaja
Although previously-introduced APIs allow the process that registers a
background worker to obtain the worker's PID, there's no way to prevent
a worker that is not currently running from being restarted. This
patch introduces a new API TerminateBackgroundWorker() that prevents
the background worker from being restarted, terminates it if it is
currently running, and causes it to be unregistered if or when it is
not running.
Patch by me. Review by Michael Paquier and KaiGai Kohei.