The current refresh behavior tries to just refresh added/dropped
publications but that leads to removing wrong tables from subscription. We
can't refresh just the dropped publication because it is quite possible
that some of the tables are removed from publication by that time and now
those will remain as part of the subscription. Also, there is a chance
that the tables that were part of the publication being dropped are also
part of another publication, so we can't remove those.
So, we decided that by default, add/drop commands will also act like
REFRESH PUBLICATION which means they will refresh all the publications. We
can keep the old behavior for "add publication" but it is better to be
consistent with "drop publication".
Author: Hou Zhijie
Reviewed-by: Masahiko Sawada, Amit Kapila
Backpatch-through: 14, where it was introduced
Discussion: https://postgr.es/m/OS0PR01MB5716935D4C2CC85A6143073F94EF9@OS0PR01MB5716.jpnprd01.prod.outlook.com
The logic used to support a change of access method for a table is
similar to changes for tablespace or relation persistence, requiring a
table rewrite with an exclusive lock of the relation changed. Table
rewrites done in ALTER TABLE already go through the table AM layer when
scanning tuples from the old relation and inserting them into the new
one, making this implementation straight-forward.
Note that partitioned tables are not supported as these have no access
methods defined.
Author: Justin Pryzby, Jeff Davis
Reviewed-by: Michael Paquier, Vignesh C
Discussion: https://postgr.es/m/20210228222530.GD20769@telsasoft.com
To add support for streaming transactions at prepare time into the
built-in logical replication, we need to do the following things:
* Modify the output plugin (pgoutput) to implement the new two-phase API
callbacks, by leveraging the extended replication protocol.
* Modify the replication apply worker, to properly handle two-phase
transactions by replaying them on prepare.
* Add a new SUBSCRIPTION option "two_phase" to allow users to enable
two-phase transactions. We enable the two_phase once the initial data sync
is over.
We however must explicitly disable replication of two-phase transactions
during replication slot creation, even if the plugin supports it. We
don't need to replicate the changes accumulated during this phase,
and moreover, we don't have a replication connection open so we don't know
where to send the data anyway.
The streaming option is not allowed with this new two_phase option. This
can be done as a separate patch.
We don't allow to toggle two_phase option of a subscription because it can
lead to an inconsistent replica. For the same reason, we don't allow to
refresh the publication once the two_phase is enabled for a subscription
unless copy_data option is false.
Author: Peter Smith, Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Sawada Masahiko, Vignesh C, Dilip Kumar, Takamichi Osumi, Greg Nancarrow
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ru
Discussion: https://postgr.es/m/CAA4eK1+opiV4aFTmWWUF9h_32=HfPOW9vZASHarT0UA5oBrtGw@mail.gmail.com
ALTER SUBSCRIPTION DROP PUBLICATION does not actually support
copy_data option, so remove it from tab completion.
Also, reword the error message that is thrown when all the
publications from a subscription are specified to be dropped.
Also, made few doc and cosmetic adjustments.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddy@enterprisedb.com>
Reviewed-by: Japin Li <japinli@hotmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CALDaNm21RwsDzs4xj14ApteAF7auyyomHNnp+NEL-sH8m-jMvQ@mail.gmail.com
Generalize the INDEX_CLEANUP VACUUM parameter (and the corresponding
reloption): make it into a ternary style boolean parameter. It now
exposes a third option, "auto". The "auto" option (which is now the
default) enables the "bypass index vacuuming" optimization added by
commit 1e55e7d1.
"VACUUM (INDEX_CLEANUP TRUE)" is redefined to once again make VACUUM
simply do any required index vacuuming, regardless of how few dead
tuples are encountered during the first scan of the target heap relation
(unless there are exactly zero). This gives users a way of opting out
of the "bypass index vacuuming" optimization, if for whatever reason
that proves necessary. It is also expected to be used by PostgreSQL
developers as a testing option from time to time.
"VACUUM (INDEX_CLEANUP FALSE)" does the same thing as it always has: it
forcibly disables both index vacuuming and index cleanup. It's not
expected to be used much in PostgreSQL 14. The failsafe mechanism added
by commit 1e55e7d1 addresses the same problem in a simpler way.
INDEX_CLEANUP can now be thought of as a testing and compatibility
option.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CAH2-WznrBoCST4_Gxh_G9hA8NzGUbeBGnOUC8FcXcrhqsv6OHQ@mail.gmail.com
An incorrectly-encoded multibyte character near the end of a string
could cause various processing loops to run past the string's
terminating NUL, with results ranging from no detectable issue to
a program crash, depending on what happens to be in the following
memory.
This isn't an issue in the server, because we take care to verify
the encoding of strings before doing any interesting processing
on them. However, that lack of care leaked into client-side code
which shouldn't assume that anyone has validated the encoding of
its input.
Although this is certainly a bug worth fixing, the PG security team
elected not to regard it as a security issue, primarily because
any untrusted text should be sanitized by PQescapeLiteral or
the like before being incorporated into a SQL or psql command.
(If an app fails to do so, the same technique can be used to
cause SQL injection, with probably much more dire consequences
than a mere client-program crash.) Those functions were already
made proof against this class of problem, cf CVE-2006-2313.
To fix, invent PQmblenBounded() which is like PQmblen() except it
won't return more than the number of bytes remaining in the string.
In HEAD we can make this a new libpq function, as PQmblen() is.
It seems imprudent to change libpq's API in stable branches though,
so in the back branches define PQmblenBounded as a macro in the files
that need it. (Note that just changing PQmblen's behavior would not
be a good idea; notably, it would completely break the escaping
functions' defense against this exact problem. So we just want a
version for those callers that don't have any better way of handling
this issue.)
Per private report from houjingyi. Back-patch to all supported branches.
When specified directly as DML queries, INSERT was not getting always
completed to "INSERT INTO", same for DELETE with "DELETE FROM". This
makes the completion behavior more consistent for both commands, saving
a few keystrokes.
Commands on policies, triggers, grant/revoke, etc. require only DELETE
as completion keyword.
Author: Haiying Tang
Reviewed-by: Dilip Kumar, Julien Rouhaud
Discussion: https://postgr.es/m/OS0PR01MB61135AE2B07CCD1AB8C6A0F6FB549@OS0PR01MB6113.jpnprd01.prod.outlook.com
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
Design problems were discovered in the handling of composite types and
record types that would cause some relevant versions not to be recorded.
Misgivings were also expressed about the use of the pg_depend catalog
for this purpose. We're out of time for this release so we'll revert
and try again.
Commits reverted:
1bf946bd: Doc: Document known problem with Windows collation versions.
cf002008: Remove no-longer-relevant test case.
ef387bed: Fix bogus collation-version-recording logic.
0fb0a050: Hide internal error for pg_collation_actual_version(<bad OID>).
ff942057: Suppress "warning: variable 'collcollate' set but not used".
d50e3b1f: Fix assertion in collation version lookup.
f24b1569: Rethink extraction of collation dependencies.
257836a7: Track collation versions for indexes.
cd6f479e: Add pg_depend.refobjversion.
7d1297df: Remove pg_collation.collversion.
Discussion: https://postgr.es/m/CA%2BhUKGLhj5t1fcjqAu8iD9B3ixJtsTNqyCCD4V0aTO9kAKAjjA%40mail.gmail.com
Commit 8ff1c94649 extended TRUNCATE command so that it can also truncate
foreign tables. But it forgot to support tab-complete for TRUNCATE on
foreign tables. That is, previously tab-complete for TRUNCATE displayed
only the names of regular tables.
This commit improves tab-complete for TRUNCATE so that it displays also
the names of foreign tables.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/551ed8c1-f531-818b-664a-2cecdab99cd8@oss.nttdata.com
Documentation and comments in code and tests have been using the terms
sensitive/insensitive cursor incorrectly relative to the SQL standard.
(Cursor sensitivity is only relevant for changes made in the same
transaction as the cursor, not for concurrent changes in other
sessions.) Moreover, some of the behavior of PostgreSQL is incorrect
according to the SQL standard, confusing the issue further. (WHERE
CURRENT OF changes are not visible in insensitive cursors, but they
should be.)
This change corrects the terminology and removes the claim that
sensitive cursors are supported. It also adds a test case that checks
the insensitive behavior in a "correct" way, using a change command
not using WHERE CURRENT OF. Finally, it adds the ASENSITIVE cursor
option to select the default asensitive behavior, per SQL standard.
There are no changes to cursor behavior in this patch.
Discussion: https://www.postgresql.org/message-id/flat/96ee8b30-9889-9e1b-b053-90e10c050e85%40enterprisedb.com
Previously, psql printed only the last result if a command string
returned multiple result sets. Now it prints all of them. The
previous behavior can be obtained by setting the psql variable
SHOW_ALL_RESULTS to off.
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Reviewed-by: "Iwata, Aya" <iwata.aya@jp.fujitsu.com>
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.21.1904132231510.8961@lancre
At present, if we want to update publications in a subscription, we
can use SET PUBLICATION. However, it requires supplying all
publications that exists and the new publications. If we want to add
new publications, it's inconvenient. The new syntax only supplies the
new publications. When the refresh is true, it only refreshes the new
publications.
Author: Japin Li <japinli@hotmail.com>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/MEYP282MB166939D0D6C480B7FBE7EFFBB6BC0@MEYP282MB1669.AUSP282.PROD.OUTLOOK.COM
To allow inserts in parallel-mode this feature has to ensure that all the
constraints, triggers, etc. are parallel-safe for the partition hierarchy
which is costly and we need to find a better way to do that. Additionally,
we could have used existing cached information in some cases like indexes,
domains, etc. to determine the parallel-safety.
List of commits reverted, in reverse chronological order:
ed62d3737c Doc: Update description for parallel insert reloption.
c8f78b6161 Add a new GUC and a reloption to enable inserts in parallel-mode.
c5be48f092 Improve FK trigger parallel-safety check added by 05c8482f7f.
e2cda3c20a Fix use of relcache TriggerDesc field introduced by commit 05c8482f7f.
e4e87a32cc Fix valgrind issue in commit 05c8482f7f.
05c8482f7f Enable parallel SELECT for "INSERT INTO ... SELECT ...".
Discussion: https://postgr.es/m/E1lMiB9-0001c3-SY@gemulon.postgresql.org
There is now a per-column COMPRESSION option which can be set to pglz
(the default, and the only option in up until now) or lz4. Or, if you
like, you can set the new default_toast_compression GUC to lz4, and
then that will be the default for new table columns for which no value
is specified. We don't have lz4 support in the PostgreSQL code, so
to use lz4 compression, PostgreSQL must be built --with-lz4.
In general, TOAST compression means compression of individual column
values, not the whole tuple, and those values can either be compressed
inline within the tuple or compressed and then stored externally in
the TOAST table, so those properties also apply to this feature.
Prior to this commit, a TOAST pointer has two unused bits as part of
the va_extsize field, and a compessed datum has two unused bits as
part of the va_rawsize field. These bits are unused because the length
of a varlena is limited to 1GB; we now use them to indicate the
compression type that was used. This means we only have bit space for
2 more built-in compresison types, but we could work around that
problem, if necessary, by introducing a new vartag_external value for
any further types we end up wanting to add. Hopefully, it won't be
too important to offer a wide selection of algorithms here, since
each one we add not only takes more coding but also adds a build
dependency for every packager. Nevertheless, it seems worth doing
at least this much, because LZ4 gets better compression than PGLZ
with less CPU usage.
It's possible for LZ4-compressed datums to leak into composite type
values stored on disk, just as it is for PGLZ. It's also possible for
LZ4-compressed attributes to be copied into a different table via SQL
commands such as CREATE TABLE AS or INSERT .. SELECT. It would be
expensive to force such values to be decompressed, so PostgreSQL has
never done so. For the same reasons, we also don't force recompression
of already-compressed values even if the target table prefers a
different compression method than was used for the source data. These
architectural decisions are perhaps arguable but revisiting them is
well beyond the scope of what seemed possible to do as part of this
project. However, it's relatively cheap to recompress as part of
VACUUM FULL or CLUSTER, so this commit adjusts those commands to do
so, if the configured compression method of the table happens not to
match what was used for some column value stored therein.
Dilip Kumar. The original patches on which this work was based were
written by Ildus Kurbangaliev, and those were patches were based on
even earlier work by Nikita Glukhov, but the design has since changed
very substantially, since allow a potentially large number of
compression methods that could be added and dropped on a running
system proved too problematic given some of the architectural issues
mentioned above; the choice of which specific compression method to
add first is now different; and a lot of the code has been heavily
refactored. More recently, Justin Przyby helped quite a bit with
testing and reviewing and this version also includes some code
contributions from him. Other design input and review from Tomas
Vondra, Álvaro Herrera, Andres Freund, Oleg Bartunov, Alexander
Korotkov, and me.
Discussion: http://postgr.es/m/20170907194236.4cefce96%40wp.localdomain
Discussion: http://postgr.es/m/CAFiTN-uUpX3ck%3DK0mLEk-G_kUQY%3DSNOTeqdaNRR9FMdQrHKebw%40mail.gmail.com
Only "IMPORT" was showing as result of the completion, while IMPORT
FOREIGN SCHEMA is the only command using this keyword in first
position. This changes the completion to show the full command name
instead of just "IMPORT".
Reviewed-by: Georgios Kokolatos, Julien Rouhaud
Discussion: https://postgr.es/m/YFL6JneBiuMWYyoh@paquier.xyz
Commit 05c8482f7f added the implementation of parallel SELECT for
"INSERT INTO ... SELECT ..." which may incur non-negligible overhead in
the additional parallel-safety checks that it performs, even when, in the
end, those checks determine that parallelism can't be used. This is
normally only ever a problem in the case of when the target table has a
large number of partitions.
A new GUC option "enable_parallel_insert" is added, to allow insert in
parallel-mode. The default is on.
In addition to the GUC option, the user may want a mechanism to allow
inserts in parallel-mode with finer granularity at table level. The new
table option "parallel_insert_enabled" allows this. The default is true.
Author: "Hou, Zhijie"
Reviewed-by: Greg Nancarrow, Amit Langote, Takayuki Tsunakawa, Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1K-cW7svLC2D7DHoGHxdAdg3P37BLgebqBOC2ZLc9a6QQ%40mail.gmail.com
Discussion: https://postgr.es/m/CAJcOf-cXnB5cnMKqWEp2E2z7Mvcd04iLVmV=qpFJrR3AcrTS3g@mail.gmail.com
Remove the entire idea of "stale stats" within nbtree VACUUM (stop
caring about stats involving the number of inserted tuples). Also
remove the vacuum_cleanup_index_scale_factor GUC/param on the master
branch (though just disable them on postgres 13).
The vacuum_cleanup_index_scale_factor/stats interface made the nbtree AM
partially responsible for deciding when pg_class.reltuples stats needed
to be updated. This seems contrary to the spirit of the index AM API,
though -- it is not actually necessary for an index AM's bulk delete and
cleanup callbacks to provide accurate stats when it happens to be
inconvenient. The core code owns that. (Index AMs have the authority
to perform or not perform certain kinds of deferred cleanup based on
their own considerations, such as page deletion and recycling, but that
has little to do with pg_class.reltuples/num_index_tuples.)
This issue was fairly harmless until the introduction of the
autovacuum_vacuum_insert_threshold feature by commit b07642db, which had
an undesirable interaction with the vacuum_cleanup_index_scale_factor
mechanism: it made insert-driven autovacuums perform full index scans,
even though there is no real benefit to doing so. This has been tied to
a regression with an append-only insert benchmark [1].
Also have remaining cases that perform a full scan of an index during a
cleanup-only nbtree VACUUM indicate that the final tuple count is only
an estimate. This prevents vacuumlazy.c from setting the index's
pg_class.reltuples in those cases (it will now only update pg_class when
vacuumlazy.c had TIDs for nbtree to bulk delete). This arguably fixes
an oversight in deduplication-related bugfix commit 48e12913.
[1] https://smalldatum.blogspot.com/2021/01/insert-benchmark-postgres-is-still.html
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoA4WHthN5uU6+WScZ7+J_RcEjmcuH94qcoUPuB42ShXzg@mail.gmail.com
Backpatch: 13-, where autovacuum_vacuum_insert_threshold was added.
ALTER INDEX was able to handle that already. This adds tab completion
for all the remaining commands that support this grammar:
- ALTER FUNCTION
- ALTER PROCEDURE
- ALTER ROUTINE
- ALTER TRIGGER
- ALTER MATERIALIZED VIEW
Author: Ian Lawrence Barwick
Discussion: https://postgr.es/m/CAB8KJ=iypYudXuMOAMOP4BpkaYbXxk=a2cdJppX0e9mJXWtuig@mail.gmail.com
This option controls if toast tables associated with a relation are
vacuumed or not when running a manual VACUUM. It was already possible
to trigger a manual VACUUM on a toast relation without processing its
main relation, but a manual vacuum on a main relation always forced a
vacuum on its toast table. This is useful in scenarios where the level
of bloat or transaction age of the main and toast relations differs a
lot.
This option is an extension of the existing VACOPT_SKIPTOAST that was
used by autovacuum to control if toast relations should be skipped or
not. This internal flag is renamed to VACOPT_PROCESS_TOAST for
consistency with the new option.
A new option switch, called --no-process-toast, is added to vacuumdb.
Author: Nathan Bossart
Reviewed-by: Kirk Jamison, Michael Paquier, Justin Pryzby
Discussion: https://postgr.es/m/BA8951E9-1524-48C5-94AF-73B1F0D7857F@amazon.com
This patch adds the possibility to move indexes to a new tablespace
while rebuilding them. Both the concurrent and the non-concurrent cases
are supported, and the following set of restrictions apply:
- When using TABLESPACE with a REINDEX command that targets a
partitioned table or index, all the indexes of the leaf partitions are
moved to the new tablespace. The tablespace references of the non-leaf,
partitioned tables in pg_class.reltablespace are not changed. This
requires an extra ALTER TABLE SET TABLESPACE.
- Any index on a toast table rebuilt as part of a parent table is kept
in its original tablespace.
- The operation is forbidden on system catalogs, including trying to
directly move a toast relation with REINDEX. This results in an error
if doing REINDEX on a single object. REINDEX SCHEMA, DATABASE and
SYSTEM skip system relations when TABLESPACE is used.
Author: Alexey Kondratov, Michael Paquier, Justin Pryzby
Reviewed-by: Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/8a8f5f73-00d3-55f8-7583-1375ca8f6a91@postgrespro.ru
The new command lists extended statistics objects. All past releases
with extended statistics are supported.
This is a simplified version of commit 891a1d0bca, which had to be
reverted due to not considering pg_statistic_ext_data is not accessible
by regular users. Fields requiring access to this catalog were removed.
It's possible to add them, but it'll require changes to core.
Author: Tatsuro Yamada
Reviewed-by: Julien Rouhaud, Alvaro Herrera, Tomas Vondra, Noriyoshi Shinoda
Discussion: https://postgr.es/m/c027a541-5856-75a5-0868-341301e1624b%40nttcom.co.jp_1
The new command lists extended statistics objects, possibly with their
sizes. All past releases with extended statistics are supported.
Author: Tatsuro Yamada
Reviewed-by: Julien Rouhaud, Alvaro Herrera, Tomas Vondra
Discussion: https://postgr.es/m/c027a541-5856-75a5-0868-341301e1624b%40nttcom.co.jp_1
This commit makes CLOSE, FETCH and MOVE commands tab-complete the list of
cursors. Also this commit makes DECLARE command tab-complete the options.
Author: Shinya Kato, Sawada Masahiko, tweaked by Fujii Masao
Reviewed-by: Shinya Kato, Sawada Masahiko, Fujii Masao
Discussion: https://postgr.es/m/b0e4c5c53ef84c5395524f5056fc71f0@MP-MSGSS-MBX001.msg.nttdata.co.jp
This changes CLUSTER and REINDEX so as a parenthesized grammar becomes
possible for options, while unifying the grammar parsing rules for
option lists with the existing ones.
This is a follow-up of the work done in 873ea9e for VACUUM, ANALYZE and
EXPLAIN. This benefits REINDEX for a potential backend-side filtering
for collatable-sensitive indexes and TABLESPACE, while CLUSTER would
benefit from the latter.
Author: Alexey Kondratov, Justin Pryzby
Discussion: https://postgr.es/m/8a8f5f73-00d3-55f8-7583-1375ca8f6a91@postgrespro.ru
Record the current version of dependent collations in pg_depend when
creating or rebuilding an index. When accessing the index later, warn
that the index may be corrupted if the current version doesn't match.
Thanks to Douglas Doole, Peter Eisentraut, Christoph Berg, Laurenz Albe,
Michael Paquier, Robert Haas, Tom Lane and others for very helpful
discussion.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com> (earlier versions)
Discussion: https://postgr.es/m/CAEepm%3D0uEQCpfq_%2BLYFBdArCe4Ot98t1aR4eYiYTe%3DyavQygiQ%40mail.gmail.com
It is not possible to get a list of foreign schemas as the server is not
known, so this provides instead a list of local schemas, which is more
useful than nothing if using a loopback server or having schema names
matching in the local and remote servers.
Author: Jeff Janes
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/CAMkU=1wr7Roj41q-XiJs=Uyc2xCmHhcGGy7J-peJQK-e+w=ghw@mail.gmail.com
This allows the tab completion of REINDEX to handle an optional
parenthesized list of options. This case is more complicated than
VACUUM or ANALYZE because of CONCURRENTLY and the different object types
to consider with the reindex.
Author: Justin Pryzby
Reviewed-by: Alexey Kondratov, Michael Paquier
Discussion: https://postgr.es/m/20200403182712.GR14618@telsasoft.com
The relkinds that support indexing are the same as the ones supporting
VACUUM, so the code gets refactored a bit with the completion query used
for CLUSTER, but there is no change for CLUSTER in this commit.
Author: Justin Pryzby
Reviewed-by: Fujii Masao, Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/20200728170408.GI20393@telsasoft.com
This corrects and simplifies $subject in a number of ways:
- Remove from the completion the pre-9.0 grammar still supported for
compatibility purposes. This simplifies the code, and allows to extend
it more easily with new patterns.
- Add completion for the options of FORMAT within a WITH clause.
- Complete WHERE and WITH clauses correctly depending on if TO or FROM
are used, WHERE being only available with COPY FROM.
Author: Vignesh C, Michael Paquier
Reviewed-by: Ahsan Hadi
Discussion: https://postgr.es/m/CALDaNm3zWr=OmxeNqOqfT=uZTSdam_j-gkX94CL8eTNfgUtf6A@mail.gmail.com
Thomas Munro fixed a longstanding annoyance in pg_bsd_indent, that
it would misformat lines containing IsA() macros on the assumption
that the IsA() call should be treated like a cast. This improves
some other cases involving field/variable names that match typedefs,
too. The only places that get worse are a couple of uses of the
OpenSSL macro STACK_OF(); we'll gladly take that trade-off.
Discussion: https://postgr.es/m/20200114221814.GA19630@alvherre.pgsql
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
Michael Paquier
Amit Kapila
Peter Eisentraut
Peter Geoghegan
Tom Lane
Thomas Munro
Alvaro Herrera
Fujii Masao
Robert Haas
Tomas Vondra
Bruce Momjian