If search_start is greater than the length of the string, we should just
return REG_NOMATCH immediately. (Note that the equality case should
*not* be rejected, since the pattern might be able to match zero
characters.) This guards various internal assumptions that the min of a
range of string positions is not more than the max. Violation of those
assumptions could allow an attempt to fetch string[search_start-1],
possibly causing a crash.
Jaime Casanova pointed out that this situation is reachable with the
new regexp_xxx functions that accept a user-specified start position.
I don't believe it's reachable via any in-core call site in v14 and
below. However, extensions could possibly call pg_regexec with an
out-of-range search_start, so let's back-patch the fix anyway.
Discussion: https://postgr.es/m/20210911180357.GA6870@ahch-to
We have long forbidden fetching backwards from a NO SCROLL cursor,
but the prohibition didn't extend to cases in which we rewind the
query altogether and then re-fetch forwards. I think the reason is
that this logic was mainly meant to protect plan nodes that can't
be run in the reverse direction. However, re-reading the query output
is problematic if the query is volatile (which includes SELECT FOR
UPDATE, not just queries with volatile functions): the re-read can
produce different results, which confuses the cursor navigation logic
completely. Another reason for disliking this approach is that some
code paths will either fetch backwards or rewind-and-fetch-forwards
depending on the distance to the target row; so that seemingly
identical use-cases may or may not draw the "cursor can only scan
forward" error. Hence, let's clean things up by disallowing rewind
as well as fetch-backwards in a NO SCROLL cursor.
Ordinarily we'd only make such a definitional change in HEAD, but
there is a third reason to consider this change now. Commit ba2c6d6ce
created some new user-visible anomalies for non-scrollable cursors
WITH HOLD, in that navigation in the cursor result got confused if the
cursor had been partially read before committing. The only good way
to resolve those anomalies is to forbid rewinding such a cursor, which
allows removal of the incorrect cursor state manipulations that
ba2c6d6ce added to PersistHoldablePortal.
To minimize the behavioral change in the back branches (including
v14), refuse to rewind a NO SCROLL cursor only when it has a holdStore,
ie has been held over from a previous transaction due to WITH HOLD.
This should avoid breaking most applications that have been sloppy
about whether to declare cursors as scrollable. We'll enforce the
prohibition across-the-board beginning in v15.
Back-patch to v11, as ba2c6d6ce was.
Discussion: https://postgr.es/m/3712911.1631207435@sss.pgh.pa.us
Some plan node types don't react well to being called again after
they've already returned NULL. PortalRunSelect() has long dealt
with this by calling the executor with NoMovementScanDirection
if it sees that we've already run the portal to the end. However,
commit ba2c6d6ce overlooked this point, so that persisting an
already-fully-fetched cursor would fail if it had such a plan.
Per report from Tomas Barton. Back-patch to v11, as the faulty
commit was. (I've omitted a test case because the type of plan
that causes a problem isn't all that stable.)
Discussion: https://postgr.es/m/CAPV2KRjd=ErgVGbvO2Ty20tKTEZZr6cYsYLxgN_W3eAo9pf5sw@mail.gmail.com
We don't allow relations to exceed 2^32-1 blocks, because block
numbers are 32 bits and the last possible block number is reserved
to mean InvalidBlockNumber. There is a check for this in mdextend,
but that's really way too late, because the smgr API requires us to
create a buffer for the block-to-be-added, and we do not want to
have any buffer with blocknum InvalidBlockNumber. (Such a case
can trigger assertions in bufmgr.c, plus I think it might confuse
ReadBuffer's logic for data-past-EOF later on.) So put the check
into ReadBuffer.
Per report from Christoph Berg. It's been like this forever,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/YTn1iTkUYBZfcODk@msg.credativ.de
Previously, walreceiver always closed the currently-opened WAL segment
and created its archive notification file, after it finished writing
the current segment up and received any WAL data that should be
written into the next segment. If walreceiver exited just before
any WAL data in the next segment arrived at standby, it did not
create the archive notification file of the current segment
even though that's known completed. This behavior could cause
WAL archiving of the segment to be delayed until subsequent
restartpoints or checkpoints created its notification file.
To fix the issue, this commit changes walreceiver so that it creates
an archive notification file of a current WAL segment immediately
if that's known completed before receiving next WAL data.
Back-patch to all supported branches.
Reported-by: Kyotaro Horiguchi
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20200630.165503.1465894182551545886.horikyota.ntt@gmail.com
Coverity complained that one caller of getFormattedTypeName() failed
to free the returned string. Which is true, but rather than fixing
that one, let's get rid of this tedious and error-prone requirement.
Now that getFormattedTypeName() caches its result, strdup'ing that
result and expecting the caller to free it accomplishes little except
to waste cycles. We do create a leak in the case where getTypes didn't
make a TypeInfo for the type, but that basically shouldn't ever happen.
Back-patch, as commit 6c450a861 was. This isn't a particularly
interesting bug fix, but the API change seems like a hazard for
future back-patching activity if we don't back-patch it.
If we copy data-modifying CTEs from the original query to a replacement
query (from a DO INSTEAD rule), we must set hasModifyingCTE properly
in the replacement query. Failure to do this can cause various
unpleasantness, such as unsafe usage of parallel plans. The code also
neglected to propagate hasRecursive, though that's only cosmetic at
the moment.
A difficulty arises if the rule action is an INSERT...SELECT. We
attach the original query's RTEs and CTEs to the sub-SELECT Query, but
data-modifying CTEs are only allowed to appear in the topmost Query.
For the moment, throw an error in such cases. It would probably be
possible to avoid this error by attaching the CTEs to the top INSERT
Query instead; but that would require a bunch of new code to adjust
ctelevelsup references. Given the narrowness of the use-case, and
the need to back-patch this fix, it does not seem worth the trouble
for now. We can revisit this if we get field complaints.
Per report from Greg Nancarrow. Back-patch to all supported branches.
(The test case added here does not fail before v10, but there are
plenty of places checking top-level hasModifyingCTE in 9.6, so I have
no doubt that this code change is necessary there too.)
Greg Nancarrow and Tom Lane
Discussion: https://postgr.es/m/CAJcOf-f68DT=26YAMz_i0+Au3TcLO5oiHY5=fL6Sfuits6r+_w@mail.gmail.com
Discussion: https://postgr.es/m/CAJcOf-fAdj=nDKMsRhQzndm-O13NY4dL6xGcEvdX5Xvbbi0V7g@mail.gmail.com
Updates/Deletes on a relation were allowed even without replica identity
after we define the publication for all tables. This would later lead to
an error on subscribers. The reason was that for such publications we were
not invalidating the relcache and the publication information for
relations was not getting rebuilt. Similarly, we were not invalidating the
relcache after dropping of such publications which will prohibit
Updates/Deletes without replica identity even without any publication.
Author: Vignesh C and Hou Zhijie
Reviewed-by: Hou Zhijie, Kyotaro Horiguchi, Amit Kapila
Backpatch-through: 10, where it was introduced
Discussion: https://postgr.es/m/CALDaNm0pF6zeWqCA8TCe2sDuwFAy8fCqba=nHampCKag-qLixg@mail.gmail.com
We make each AIX shared library export all globals found in .o files
that originate in the library. That doesn't include symbols acquired by
-lpgcommon_shlib. That is good on average, but it became a problem for
libpq when commit e6afa8918c moved five
official libpq API symbols into src/common. Fix this by implementing
the SHLIB_EXPORTS mechanism for AIX, so affected libraries export the
same symbols that they export on Linux. This reintroduces symbols
pg_encoding_to_char, pg_utf_mblen, pg_char_to_encoding,
pg_valid_server_encoding, and pg_valid_server_encoding_id. Back-patch
to v13, where the aforementioned commit first appeared. While a minor
release is usually the wrong time to add or remove symbol exports in
libpq or libecpg, we should expect users to want each documented symbol.
Tony Reix
Discussion: https://postgr.es/m/PR3PR02MB6396742E2FC3E77D37A920BC86C79@PR3PR02MB6396.eurprd02.prod.outlook.com
timetz_zone() delivered completely wrong answers if the zone was
specified by a dynamic TZ abbreviation, because it failed to account
for the difference between the POSIX conventions for field values in
struct pg_tm and the conventions used in PG-specific datetime code.
As a stopgap fix, just adjust the tm_year and tm_mon fields to match
PG conventions. This is fixed in a different way in HEAD (388e71af8)
but I don't want to back-patch the change of reference point.
Discussion: https://postgr.es/m/CAJ7c6TOMG8zSNEZtCn5SPe+cCk3Lfxb71ZaQwT2F4T7PJ_t=KA@mail.gmail.com
Attempting to make hashfloat4() look as much as possible like
hashfloat8(), I'd figured I could replace NaNs with get_float4_nan()
before widening to float8. However, results from protosciurus
and topminnow show that on some platforms that produces a different
bit-pattern from get_float8_nan(), breaking the intent of ce773f230.
Rearrange so that we use the result of get_float8_nan() for all NaN
cases. As before, back-patch.
Replace fixed-length command buffers with psprintf() calls. We didn't
have anything as convenient as psprintf() when this code was written,
but now that we do, there's little reason for the limitation to
stand. Removing it eliminates some corner cases where (for example)
starting the postmaster with a whole lot of options fails.
Most individual file names that pg_ctl deals with are still restricted
to MAXPGPATH, but we've seldom had complaints about that limitation
so long as it only applies to one filename.
Back-patch to all supported branches.
Phil Krylov
Discussion: https://postgr.es/m/567e199c6b97ee19deee600311515b86@krylov.eu
Previously this was allowed, but the collation effectively vanished
into the ether because of the way lookup_collation() works: you could
not use the collation, nor even drop it. Seems better to give an
error up front than to leave the user wondering why it doesn't work.
(Because this test is in DefineCollation not CreateCollation, it does
not prevent pg_import_system_collations from creating ICU collations,
regardless of the initially-chosen encoding.)
Per bug #17170 from Andrew Bille. Back-patch to v10 where ICU support
was added.
Discussion: https://postgr.es/m/17170-95845cf3f0a9c36d@postgresql.org
Modern POSIX seems to require strtod() to accept "-NaN", but there's
nothing about NaN in SUSv2, and some of our oldest buildfarm members
don't like it. Let's try writing it as -'NaN' instead; that seems
to produce the same result, at least on Intel hardware.
Per buildfarm.
The IEEE 754 standard allows a wide variety of bit patterns for NaNs,
of which at least two ("NaN" and "-NaN") are pretty easy to produce
from SQL on most machines. This is problematic because our btree
comparison functions deem all NaNs to be equal, but our float hash
functions know nothing about NaNs and will happily produce varying
hash codes for them. That causes unexpected results from queries
that hash a column containing different NaN values. It could also
produce unexpected lookup failures when using a hash index on a
float column, i.e. "WHERE x = 'NaN'" will not find all the rows
it should.
To fix, special-case NaN in the float hash functions, not too much
unlike the existing special case that forces zero and minus zero
to hash the same. I arranged for the most vanilla sort of NaN
(that coming from the C99 NAN constant) to still have the same
hash code as before, to reduce the risk to existing hash indexes.
I dithered about whether to back-patch this into stable branches,
but ultimately decided to do so. It's a clear improvement for
queries that hash internally. If there is anybody who has -NaN
in a hash index, they'd be well advised to re-index after applying
this patch ... but the misbehavior if they don't will not be much
worse than the misbehavior they had before.
Per bug #17172 from Ma Liangzhu.
Discussion: https://postgr.es/m/17172-7505bea9e04e230f@postgresql.org
The check to test whether the subscription workers were restarting after a
change in the subscription was failing. The reason was that the test was
assuming the walsender started before it reaches the 'streaming' state and
the walsender was exiting due to an error before that. Now, the walsender
was erroring out before reaching the 'streaming' state because it tries to
acquire the slot before the previous walsender has exited.
In passing, improve the die messages so that it is easier to investigate
the failures in the future if any.
Reported-by: Michael Paquier, as per buildfarm
Author: Ajin Cherian
Reviewed-by: Masahiko Sawada, Amit Kapila
Backpatch-through: 10, where this test was introduced
Discussion: https://postgr.es/m/YRnhFxa9bo73wfpV@paquier.xyz
For no particularly good reason, getPolicies() queried pg_policy
separately for each table. We can collect all the policies in
a single query instead, and attach them to the correct TableInfo
objects using findTableByOid() lookups. On the regression
database, this reduces the number of queries substantially, and
provides a visible savings even when running against a local
server.
Per complaint from Hubert Depesz Lubaczewski. Since this is such
a simple fix and can have a visible performance benefit, back-patch
to all supported branches.
Discussion: https://postgr.es/m/20210826084430.GA26282@depesz.com
There's long been a "TODO: there might be some value in caching
the results" annotation on pg_dump's getFormattedTypeName function;
but we hadn't gotten around to checking what it was costing us to
repetitively look up type names. It turns out that when dumping the
current regression database, about 10% of the total number of queries
issued are duplicative format_type() queries. However, Hubert Depesz
Lubaczewski reported a not-unusual case where these account for over
half of the queries issued by pg_dump. Individually these queries
aren't expensive, but when network lag is a factor, they add up to a
problem. We can very easily add some caching to getFormattedTypeName
to solve it.
Since this is such a simple fix and can have a visible performance
benefit, back-patch to all supported branches.
Discussion: https://postgr.es/m/20210826084430.GA26282@depesz.com
Commit 5be8ce82e8 added a new role to the stats_ext regression suite,
but the role name did not start with regress_ causing failures when
running with ENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS. Fixed by
renaming the role to start with the expected regress_ prefix.
Backpatch-through: 10, same as the new regression test
Discussion: https://postgr.es/m/1F238937-7CC2-4703-A1B1-6DC225B8978A%40enterprisedb.com
When an ownership check on extended statistics object failed, the code
was calling aclcheck_error_type to report the failure, which is clearly
wrong, resulting in cache lookup errors. Fix by calling aclcheck_error.
This issue exists since the introduction of extended statistics, so
backpatch all the way back to PostgreSQL 10. It went unnoticed because
there were no tests triggering the error, so add one.
Reported-by: Mark Dilger
Backpatch-through: 10, where extended stats were introduced
Discussion: https://postgr.es/m/1F238937-7CC2-4703-A1B1-6DC225B8978A%40enterprisedb.com
Most data-corruption reports mention the location of the problem, but
this one failed to. Add it.
Backpatch all the way back. In 12 and older, also assign the
ERRCODE_DATA_CORRUPTED error code as was done in commit fd6ec93bf8 for
13 and later.
Discussion: https://postgr.es/m/202108191637.oqyzrdtnheir@alvherre.pgsql
Strictly speaking this isn't a bug, but since all references to catalog
objects are schema-qualified, we might as well be consistent. The
omission first appeared in commit 1c5d9270e3, so backpatch to 12.
Author: Justin Pryzby <pryzbyj@telsasoft.com>
Discussion: https://postgr.es/m/20210827193151.GN26465@telsasoft.com
If the system crashed between CREATE TABLESPACE and the next checkpoint,
the result could be some files in the tablespace unexpectedly containing
no rows. Affected files would be those for which the system did not
write WAL; see the wal_skip_threshold documentation. Before v13, a
different set of conditions governed the writing of WAL; see v12's
<sect2 id="populate-pitr">. (The v12 conditions were broader in some
ways and narrower in others.) Users may want to audit non-default
tablespaces for unexpected short files. The bug could have truncated an
index without affecting the associated table, and reindexing the index
would fix that particular problem.
This fixes the bug by making create_tablespace_directories() more like
TablespaceCreateDbspace(). create_tablespace_directories() was
recursively removing tablespace contents, reasoning that WAL redo would
recreate everything removed that way. That assumption holds for other
wal_level values. Under wal_level=minimal, the old approach could
delete files for which no other copy existed. Back-patch to 9.6 (all
supported versions).
Reviewed by Robert Haas and Prabhat Sahu. Reported by Robert Haas.
Discussion: https://postgr.es/m/CA+TgmoaLO9ncuwvr2nN-J4VEP5XyAcy=zKiHxQzBbFRxxGxm0w@mail.gmail.com
Somehow, spgist overlooked the need to call pgstat_count_index_scan().
Hence, pg_stat_all_indexes.idx_scan and equivalent columns never
became nonzero for an SP-GiST index, although the related per-tuple
counters worked fine.
This fix works a bit differently from other index AMs, in that the
counter increment occurs in spgrescan not spggettuple/spggetbitmap.
It looks like this won't make the user-visible semantics noticeably
different, so I won't go to the trouble of introducing an is-this-
the-first-call flag just to make the counter bumps happen in the
same places.
Per bug #17163 from Christian Quest. Back-patch to all supported
versions.
Discussion: https://postgr.es/m/17163-b8c5cc88322a5e92@postgresql.org
Pengchengliu reported an assertion failure in a parallel woker while
performing a parallel scan using an overflowed snapshot. The proximate
cause is that TransactionXmin was set to an incorrect value. The
underlying cause is incorrect snapshot handling in parallel.c.
In particular, InitializeParallelDSM() was unconditionally calling
GetTransactionSnapshot(), because I (rhaas) mistakenly thought that
was always retrieving an existing snapshot whereas, at isolation
levels less than REPEATABLE READ, it's actually taking a new one. So
instead do this only at higher isolation levels where there actually
is a single snapshot for the whole transaction.
By itself, this is not a sufficient fix, because we still need to
guarantee that TransactionXmin gets set properly in the workers. The
easiest way to do that seems to be to install the leader's active
snapshot as the transaction snapshot if the leader did not serialize a
transaction snapshot. This doesn't affect the results of future
GetTrasnactionSnapshot() calls since those have to take a new snapshot
anyway; what we care about is the side effect of setting TransactionXmin.
Report by Pengchengliu. Patch by Greg Nancarrow, except for some comment
text which I supplied.
Discussion: https://postgr.es/m/002f01d748ac$eaa781a0$bff684e0$@tju.edu.cn
Commit 325f2ec555 introduced pg_class.relwrite to skip operations on
tables created as part of a heap rewrite during DDL. It links such
transient heaps to the original relation OID via this new field in
pg_class but forgot to do anything about toast tables. So, logical
decoding was not able to skip operations on internally created toast
tables. This leads to an error when we tried to decode the WAL for the
next operation for which it appeared that there is a toast data where
actually it didn't have any toast data.
To fix this, we set pg_class.relwrite for internally created toast tables
as well which allowed skipping operations on them during logical decoding.
Author: Bertrand Drouvot
Reviewed-by: David Zhang, Amit Kapila
Backpatch-through: 11, where it was introduced
Discussion: https://postgr.es/m/b5146fb1-ad9e-7d6e-f980-98ed68744a7c@amazon.com
There are two identical error messages about valid value of modulus for
hash partition, in PostgreSQL source code. Commit 0e1275fb07 improved
only one of them so that ambiguous word "positive" was avoided there,
and forgot to improve the other. This commit improves the other.
Which would reduce translator burden.
Back-pach to v11 where the error message exists.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20210819.170315.1413060634876301811.horikyota.ntt@gmail.com
The distance in phrase operator must be an integer value between zero
and MAXENTRYPOS inclusive. But previously the error message about
its valid value included the information about its upper limit
but not lower limit (i.e., zero). This commit improves the error message
so that it also includes the information about its lower limit.
Back-patch to v9.6 where full-text phrase search was supported.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20210819.170315.1413060634876301811.horikyota.ntt@gmail.com
Regexps like "(.){0}...\1" drew an "invalid backreference number".
That's not unreasonable on its face, since the capture group will
never be matched if it's iterated zero times. However, other engines
such as Perl's don't complain about this, nor do we throw an error for
related cases such as "(.)|\1", even though that backref can never
succeed either. Also, if the zero-iterations case happens at runtime
rather than compile time --- say, "(x)*...\1" when there's no "x" to
be found --- that's not an error, we just deem the backref to not
match. Making this even less defensible, no error was thrown for
nested cases such as "((.)){0}...\2"; and to add insult to injury,
those cases could result in assertion failures instead. (It seems
that nothing especially bad happened in non-assert builds, though.)
Let's just fix it so that no error is thrown and instead the backref
is deemed to never match, so that compile-time detection of no
iterations behaves the same as run-time detection.
Per report from Mark Dilger. This appears to be an aboriginal error
in Spencer's library, so back-patch to all supported versions.
Pre-v14, it turns out to also be necessary to back-patch one aspect of
commits cb76fbd7e/00116dee5, namely to create capture-node subREs with
the begin/end states of their subexpressions, not the current lp/rp
of the outer parseqatom invocation. Otherwise delsub complains that
we're trying to disconnect a state from itself. This is a bit scary
but code examination shows that it's safe: in the pre-v14 code, if we
want to wrap iteration around the subexpression, the first thing we do
is overwrite the atom's begin/end fields with new states. So the
bogus values didn't survive long enough to be used for anything, except
if no iteration is required, in which case it doesn't matter.
Discussion: https://postgr.es/m/A099E4A8-4377-4C64-A98C-3DEDDC075502@enterprisedb.com
The recursion in cdissect() was careless about clearing match data
for capturing parentheses after rejecting a partial match. This
could allow a later back-reference to succeed when by rights it
should fail for lack of a defined referent.
To fix, think a little more rigorously about what the contract
between different levels of cdissect's recursion needs to be.
With the right spec, we can fix this using fewer rather than more
resets of the match data; the key decision being that a failed
sub-match is now explicitly responsible for clearing any matches
it may have set.
There are enough other cross-checks and optimizations in the code
that it's not especially easy to exhibit this problem; usually, the
match will fail as-expected. Plus, regexps that are even potentially
vulnerable are most likely user errors, since there's just not much
point in writing a back-ref that doesn't always have a referent.
These facts perhaps explain why the issue hasn't been detected,
even though it's almost certainly a couple of decades old.
Discussion: https://postgr.es/m/151435.1629733387@sss.pgh.pa.us
WAL records may span multiple segments, but XLogWrite() does not
wait for the entire record to be written out to disk before
creating archive status files. Instead, as soon as the last WAL page of
the segment is written, the archive status file is created, and the
archiver may process it. If PostgreSQL crashes before it is able to
write and flush the rest of the record (in the next WAL segment), the
wrong version of the first segment file lingers in the archive, which
causes operations such as point-in-time restores to fail.
To fix this, keep track of records that span across segments and ensure
that segments are only marked ready-for-archival once such records have
been completely written to disk.
This has always been wrong, so backpatch all the way back.
Author: Nathan Bossart <bossartn@amazon.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Ryo Matsumura <matsumura.ryo@fujitsu.com>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/CBDDFA01-6E40-46BB-9F98-9340F4379505@amazon.com
In a backup manifest, WAL-Ranges stores the range of WAL that is
required for the backup to be valid. pg_verifybackup would then
internally use pg_waldump for the checks based on this data.
When the timeline where the backup started was more than 1 with a
history file looked at for the manifest data generation, the calculation
of the WAL range for the first timeline to check was incorrect. The
previous logic used as start LSN the start position of the first
timeline, but it needs to use the start LSN of the backup. This would
cause failures with pg_verifybackup, or any tools making use of the
backup manifests.
This commit adds a test based on a logic using a self-promoted node,
making it rather cheap.
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20210818.143031.1867083699202617521.horikyota.ntt@gmail.com
Backpatch-through: 13
After detecting a sub-match "dissect" failure (i.e., a backref match
failure) in the i'th sub-match of an iteration node, we should proceed
by adjusting the attempted length of the i'th submatch. As coded,
though, these functions changed the attempted length of the *last*
sub-match, and only after exhausting all possibilities for that would
they back up to adjust the next-to-last sub-match, and then the
second-from-last, etc; all of which is wasted effort, since only
changing the start or length of the i'th sub-match can possibly make
it succeed. This oversight creates the possibility for exponentially
bad performance. Fortunately the problem is masked in most cases by
optimizations or constraints applied elsewhere; which explains why
we'd not noticed it before. But it is possible to reach the problem
with fairly simple, if contrived, regexps.
Oversight in my commit 173e29aa5. That's pretty ancient now,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/1808998.1629412269@sss.pgh.pa.us
transformLockingClause neglected to exclude the pseudo-RTEs for
OLD/NEW when processing a rule's query. This led to odd errors
or even crashes later on. This bug is very ancient, but it's
not terribly surprising that nobody noticed, since the use-case
for SELECT FOR UPDATE in a non-view rule is somewhere between
thin and non-existent. Still, crashing is not OK.
Per bug #17151 from Zhiyong Wu. Thanks to Masahiko Sawada
for analysis of the problem.
Discussion: https://postgr.es/m/17151-c03a3e6e4ec9aadb@postgresql.org
Recursion into the FILTER clause was mis-implemented, such that a
relevant Var or Aggref at the very top of the FILTER clause would
be ignored. (Of course, that'd have to be a plain boolean Var or
boolean-returning aggregate.) The consequence would be
mis-identification of the correct semantic level of the aggregate,
which could lead to not-per-spec query behavior. If the FILTER
expression is an aggregate, this could also lead to failure to issue
an expected "aggregate function calls cannot be nested" error, which
would likely result in a core dump later on, since the planner and
executor aren't expecting such cases to appear.
The root cause is that commit b560ec1b0 blindly copied some code
that assumed it's recursing into a List, and thus didn't examine the
top-level node. To forestall questions about why this call doesn't
look like the others, as well as possible future copy-and-paste
mistakes, let's change all three check_agg_arguments_walker calls in
check_agg_arguments, even though only the one for the filter clause
is really broken.
Per bug #17152 from Zhiyong Wu. This has been wrong since we
implemented FILTER, so back-patch to all supported versions.
(Testing suggests that pre-v11 branches manage to avoid crashing
in the bad-Aggref case, thanks to "redundant" checks in ExecInitAgg.
But I'm not sure how thorough that protection is, and anyway the
wrong-behavior issue remains, so fix 9.6 and 10 too.)
Discussion: https://postgr.es/m/17152-c7f906cc1a88e61b@postgresql.org
If recordDependencyOnCurrentExtension is invoked on a pre-existing,
free-standing object during an extension update script, that object
will become owned by the extension. In our current code this is
possible in three cases:
* Replacing a "shell" type or operator.
* CREATE OR REPLACE overwriting an existing object.
* ALTER TYPE SET, ALTER DOMAIN SET, and ALTER OPERATOR SET.
The first of these cases is intentional behavior, as noted by the
existing comments for GenerateTypeDependencies. It seems like
appropriate behavior for CREATE OR REPLACE too; at least, the obvious
alternatives are not better. However, the fact that it happens during
ALTER is an artifact of trying to share code (GenerateTypeDependencies
and makeOperatorDependencies) between the CREATE and ALTER cases.
Since an extension script would be unlikely to ALTER an object that
didn't already belong to the extension, this behavior is not very
troubling for the direct target object ... but ALTER TYPE SET will
recurse to dependent domains, and it is very uncool for those to
become owned by the extension if they were not already.
Let's fix this by redefining the ALTER cases to never change extension
membership, full stop. We could minimize the behavioral change by
only changing the behavior when ALTER TYPE SET is recursing to a
domain, but that would complicate the code and it does not seem like
a better definition.
Per bug #17144 from Alex Kozhemyakin. Back-patch to v13 where ALTER
TYPE SET was added. (The other cases are older, but since they only
affect the directly-named object, there's not enough of a problem to
justify changing the behavior further back.)
Discussion: https://postgr.es/m/17144-e67d7a8f049de9af@postgresql.org
In OpenSSL there are two types of BIO's (I/O abstractions):
source/sink and filters. A source/sink BIO is a source and/or
sink of data, ie one acting on a socket or a file. A filter
BIO takes a stream of input from another BIO and transforms it.
In order for BIO_find_type() to be able to traverse the chain
of BIO's and correctly find all BIO's of a certain type they
shall have the type bit set accordingly, source/sink BIO's
(what PostgreSQL implements) use BIO_TYPE_SOURCE_SINK and
filter BIO's use BIO_TYPE_FILTER. In addition to these, file
descriptor based BIO's should have the descriptor bit set,
BIO_TYPE_DESCRIPTOR.
The PostgreSQL implementation didn't set the type bits, which
went unnoticed for a long time as it's only really relevant
for code auditing the OpenSSL installation, or doing similar
tasks. It is required by the API though, so this fixes it.
Backpatch through 9.6 as this has been wrong for a long time.
Author: Itamar Gafni
Discussion: https://postgr.es/m/SN6PR06MB39665EC10C34BB20956AE4578AF39@SN6PR06MB3966.namprd06.prod.outlook.com
Backpatch-through: 9.6
This commit ensures that the wait interval in the replay delay loop
waiting for an amount of time defined by recovery_min_apply_delay is
correctly handled on reload, recalculating the delay if this GUC value
is updated, based on the timestamp of the commit record being replayed.
The previous behavior would be problematic for example with replay
still waiting even if the delay got reduced or just cancelled. If the
apply delay was increased to a larger value, the wait would have just
respected the old value set, finishing earlier.
Author: Soumyadeep Chakraborty, Ashwin Agrawal
Reviewed-by: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/CAE-ML+93zfr-HLN8OuxF0BjpWJ17O5dv1eMvSE5jsj9jpnAXZA@mail.gmail.com
Backpatch-through: 9.6
Like the ARM case, just use gcc's __sync_lock_test_and_set();
that will compile into AMOSWAP.W.AQ which does what we need.
At some point it might be worth doing some work on atomic ops
for RISC-V, but this should be enough for a creditable port.
Back-patch to all supported branches, just in case somebody
wants to try them on RISC-V.
Marek Szuba
Discussion: https://postgr.es/m/dea97b6d-f55f-1f6d-9109-504aa7dfa421@gentoo.org
This fixes a bug in simplehash.h which caused an incorrect size mask to be
used when the hash table grew to SH_MAX_SIZE (2^32). The code was
incorrectly setting the size mask to 0 when the hash tables reached the
maximum possible number of buckets. This would result always trying to
use the 0th bucket causing an infinite loop of trying to grow the hash
table due to there being too many collisions.
Seemingly it's not that common for simplehash tables to ever grow this big
as this bug dates back to v10 and nobody seems to have noticed it before.
However, probably the most likely place that people would notice it would
be doing a large in-memory Hash Aggregate with something close to at least
2^31 groups.
After this fix, the code now works correctly with up to within 98% of 2^32
groups and will fail with the following error when trying to insert any
more items into the hash table:
ERROR: hash table size exceeded
However, the work_mem (or hash_mem_multiplier in newer versions) settings
will generally cause Hash Aggregates to spill to disk long before reaching
that many groups. The minimal test case I did took a work_mem setting of
over 192GB to hit the bug.
simplehash hash tables are used in a few other places such as Bitmap Index
Scans, however, again the size that the hash table can become there is
also limited to work_mem and it would take a relation of around 16TB
(2^31) pages and a very large work_mem setting to hit this. With smaller
work_mem values the table would become lossy and never grow large enough
to hit the problem.
Author: Yura Sokolov
Reviewed-by: David Rowley, Ranier Vilela
Discussion: https://postgr.es/m/b1f7f32737c3438136f64b26f4852b96@postgrespro.ru
Backpatch-through: 10, where simplehash.h was added
It's hard to disable ASLR on current macOS releases, for testing with
-DEXEC_BACKEND. You could already set the environment variable
PG_SHMEM_ADDR to something not likely to collide with mappings created
earlier in process startup. Let's also provide a default value that
works on current releases and architectures, for developer convenience.
As noted in the pre-existing comment, this is a horrible hack, but
-DEXEC_BACKEND is only used by Unix-based PostgreSQL developers for
testing some otherwise Windows-only code paths, so it seems excusable.
Back-patch to all supported branches.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20210806032944.m4tz7j2w47mant26%40alap3.anarazel.de
As a result of confusion about whether the "char" type is signed or
unsigned, scans for index searches like "col < 'x'" or "col <= 'x'"
would start at the middle of the index not the left end, thus missing
many or all of the entries they should find. Fortunately, this
is not a symptom of index corruption. It's only the search logic
that is broken, and we can fix it without unpleasant side-effects.
Per report from Jason Kim. This has been wrong since btree_gin's
beginning, so back-patch to all supported branches.
Discussion: https://postgr.es/m/20210810001649.htnltbh7c63re42p@jasonk.me
Tom Lane
Fujii Masao
Amit Kapila
Noah Misch
Peter Eisentraut
Alvaro Herrera
Michael Paquier
Tomas Vondra
Daniel Gustafsson
Robert Haas
Heikki Linnakangas
David Rowley
Thomas Munro