Although user-defined relations can't be directly created in
pg_catalog, it's possible for them to end up there, because you can
create them in some other schema and then use ALTER TABLE .. SET SCHEMA
to move them there. Previously, such relations couldn't afterwards
be manipulated, because IsSystemRelation()/IsSystemClass() rejected
all attempts to modify objects in the pg_catalog schema, regardless
of their origin. With this patch, they now reject only those
objects in pg_catalog which were created at initdb-time, allowing
most operations on user-created tables in pg_catalog to proceed
normally.
This patch also adds new functions IsCatalogRelation() and
IsCatalogClass(), which is similar to IsSystemRelation() and
IsSystemClass() but with a slightly narrower definition: only TOAST
tables of system catalogs are included, rather than *all* TOAST tables.
This is currently used only for making decisions about when
invalidation messages need to be sent, but upcoming logical decoding
patches will find other uses for this information.
Andres Freund, with some modifications by me.
Change SET LOCAL/CONSTRAINTS/TRANSACTION behavior outside of a
transaction block from error (post-9.3) to warning. (Was nothing in <=
9.3.) Also change ABORT outside of a transaction block from notice to
warning.
DISCARD ALL will now discard cached sequence information, as well.
Fabrízio de Royes Mello, reviewed by Zoltán Böszörményi, with some
further tweaks by me.
There's no inherent reason why an aggregate function can't be variadic
(even VARIADIC ANY) if its transition function can handle the case.
Indeed, this patch to add the feature touches none of the planner or
executor, and little of the parser; the main missing stuff was DDL and
pg_dump support.
It is true that variadic aggregates can create the same sort of ambiguity
about parameters versus ORDER BY keys that was complained of when we
(briefly) had both one- and two-argument forms of string_agg(). However,
the policy formed in response to that discussion only said that we'd not
create any built-in aggregates with varying numbers of arguments, not that
we shouldn't allow users to do it. So the logical extension of that is
we can allow users to make variadic aggregates as long as we're wary about
shipping any such in core.
In passing, this patch allows aggregate function arguments to be named, to
the extent of remembering the names in pg_proc and dumping them in pg_dump.
You can't yet call an aggregate using named-parameter notation. That seems
like a likely future extension, but it'll take some work, and it's not what
this patch is really about. Likewise, there's still some work needed to
make window functions handle VARIADIC fully, but I left that for another
day.
initdb forced because of new aggvariadic field in Aggref parse nodes.
Choose a saner ordering of parameters (adding a new input param after
the output params seemed a bit random), update the function's header
comment to match reality (cmon folks, is this really that hard?),
get rid of useless and sloppily-defined distinction between
PROCESS_UTILITY_SUBCOMMAND and PROCESS_UTILITY_GENERATED.
We mustn't run any of the event-trigger support code when handling
utility statements like START TRANSACTION or ABORT, because that code
may need to refresh event-trigger cache data, which requires being
inside a valid transaction. (This mistake explains the consistent
build failures exhibited by the CLOBBER_CACHE_ALWAYS buildfarm members,
as well as some irreproducible failures on other members.)
The least messy fix seems to be to break standard_ProcessUtility into two
functions, one that handles all the statements not supported by event
triggers, and one that contains the event-trigger support code and handles
the statements that are supported by event triggers.
This change also fixes several inconsistencies, such as four cases where
support had been installed for "ddl_event_start" but not "ddl_event_end"
triggers, plus the fact that InvokeDDLCommandEventTriggersIfSupported()
paid no mind to isCompleteQuery.
Dimitri Fontaine and Tom Lane
On older-model gcc, the original coding of UTILITY_BEGIN_QUERY() can
draw this error because of multiple assignments to _needCleanup.
Rather than mark that variable volatile, we can suppress the warning
by arranging to have just one unconditional assignment before PG_TRY.
This event takes place just before ddl_command_end, and is fired if and
only if at least one object has been dropped by the command. (For
instance, DROP TABLE IF EXISTS of a table that does not in fact exist
will not lead to such a trigger firing). Commands that drop multiple
objects (such as DROP SCHEMA or DROP OWNED BY) will cause a single event
to fire. Some firings might be surprising, such as
ALTER TABLE DROP COLUMN.
The trigger is fired after the drop has taken place, because that has
been deemed the safest design, to avoid exposing possibly-inconsistent
internal state (system catalogs as well as current transaction) to the
user function code. This means that careful tracking of object
identification is required during the object removal phase.
Like other currently existing events, there is support for tag
filtering.
To support the new event, add a new pg_event_trigger_dropped_objects()
set-returning function, which returns a set of rows comprising the
objects affected by the command. This is to be used within the user
function code, and is mostly modelled after the recently introduced
pg_identify_object() function.
Catalog version bumped due to the new function.
Dimitri Fontaine and Álvaro Herrera
Review by Robert Haas, Tom Lane
A materialized view has a rule just like a view and a heap and
other physical properties like a table. The rule is only used to
populate the table, references in queries refer to the
materialized data.
This is a minimal implementation, but should still be useful in
many cases. Currently data is only populated "on demand" by the
CREATE MATERIALIZED VIEW and REFRESH MATERIALIZED VIEW statements.
It is expected that future releases will add incremental updates
with various timings, and that a more refined concept of defining
what is "fresh" data will be developed. At some point it may even
be possible to have queries use a materialized in place of
references to underlying tables, but that requires the other
above-mentioned features to be working first.
Much of the documentation work by Robert Haas.
Review by Noah Misch, Thom Brown, Robert Haas, Marko Tiikkaja
Security review by KaiGai Kohei, with a decision on how best to
implement sepgsql still pending.
This patch introduces two additional lock modes for tuples: "SELECT FOR
KEY SHARE" and "SELECT FOR NO KEY UPDATE". These don't block each
other, in contrast with already existing "SELECT FOR SHARE" and "SELECT
FOR UPDATE". UPDATE commands that do not modify the values stored in
the columns that are part of the key of the tuple now grab a SELECT FOR
NO KEY UPDATE lock on the tuple, allowing them to proceed concurrently
with tuple locks of the FOR KEY SHARE variety.
Foreign key triggers now use FOR KEY SHARE instead of FOR SHARE; this
means the concurrency improvement applies to them, which is the whole
point of this patch.
The added tuple lock semantics require some rejiggering of the multixact
module, so that the locking level that each transaction is holding can
be stored alongside its Xid. Also, multixacts now need to persist
across server restarts and crashes, because they can now represent not
only tuple locks, but also tuple updates. This means we need more
careful tracking of lifetime of pg_multixact SLRU files; since they now
persist longer, we require more infrastructure to figure out when they
can be removed. pg_upgrade also needs to be careful to copy
pg_multixact files over from the old server to the new, or at least part
of multixact.c state, depending on the versions of the old and new
servers.
Tuple time qualification rules (HeapTupleSatisfies routines) need to be
careful not to consider tuples with the "is multi" infomask bit set as
being only locked; they might need to look up MultiXact values (i.e.
possibly do pg_multixact I/O) to find out the Xid that updated a tuple,
whereas they previously were assured to only use information readily
available from the tuple header. This is considered acceptable, because
the extra I/O would involve cases that would previously cause some
commands to block waiting for concurrent transactions to finish.
Another important change is the fact that locking tuples that have
previously been updated causes the future versions to be marked as
locked, too; this is essential for correctness of foreign key checks.
This causes additional WAL-logging, also (there was previously a single
WAL record for a locked tuple; now there are as many as updated copies
of the tuple there exist.)
With all this in place, contention related to tuples being checked by
foreign key rules should be much reduced.
As a bonus, the old behavior that a subtransaction grabbing a stronger
tuple lock than the parent (sub)transaction held on a given tuple and
later aborting caused the weaker lock to be lost, has been fixed.
Many new spec files were added for isolation tester framework, to ensure
overall behavior is sane. There's probably room for several more tests.
There were several reviewers of this patch; in particular, Noah Misch
and Andres Freund spent considerable time in it. Original idea for the
patch came from Simon Riggs, after a problem report by Joel Jacobson.
Most code is from me, with contributions from Marti Raudsepp, Alexander
Shulgin, Noah Misch and Andres Freund.
This patch was discussed in several pgsql-hackers threads; the most
important start at the following message-ids:
AANLkTimo9XVcEzfiBR-ut3KVNDkjm2Vxh+t8kAmWjPuv@mail.gmail.com1290721684-sup-3951@alvh.no-ip.org1294953201-sup-2099@alvh.no-ip.org1320343602-sup-2290@alvh.no-ip.org1339690386-sup-8927@alvh.no-ip.org4FE5FF020200002500048A3D@gw.wicourts.gov4FEAB90A0200002500048B7D@gw.wicourts.gov
This is again intended to support extensions to the event trigger
functionality. This may go a bit further than we need for that
purpose, but there's some value in being consistent, and the OID
may be useful for other purposes also.
Dimitri Fontaine
Normally it is unsafe to allow ALTER TYPE ADD VALUE in a transaction block,
because instances of the value could be added to indexes later in the same
transaction, and then they would still be accessible even if the
transaction rolls back. However, we can allow this if the enum type itself
was created in the current transaction, because then any such indexes would
have to go away entirely on rollback.
The reason for allowing this is to support pg_upgrade's new usage of
pg_restore --single-transaction: in --binary-upgrade mode, pg_dump emits
enum types as a succession of ALTER TYPE ADD VALUE commands so that it can
preserve the values' OIDs. The support is a bit limited, so we'll leave
it undocumented.
Andres Freund
The code seems to have been written to handle the pre-parse-analysis
representation, where an ExecuteStmt would appear directly under
CreateTableAsStmt. But in reality the function is only run on
already-parse-analyzed statements, so there will be a Query node in
between. We'd not noticed the bug because the function is generally
not used at all except in extended query protocol.
Per report from Robert Haas and Rushabh Lathia.
This reduces unnecessary exposure of other headers through htup.h, which
is very widely included by many files.
I have chosen to move the function prototypes to the new file as well,
because that means htup.h no longer needs to include tupdesc.h. In
itself this doesn't have much effect in indirect inclusion of tupdesc.h
throughout the tree, because it's also required by execnodes.h; but it's
something to explore in the future, and it seemed best to do the htup.h
change now while I'm busy with it.
Commit 3855968f32 added syntax, pg_dump,
psql support, and documentation, but the triggers didn't actually fire.
With this commit, they now do. This is still a pretty basic facility
overall because event triggers do not get a whole lot of information
about what the user is trying to do unless you write them in C; and
there's still no option to fire them anywhere except at the very
beginning of the execution sequence, but it's better than nothing,
and a good building block for future work.
Along the way, add a regression test for ALTER LARGE OBJECT, since
testing of event triggers reveals that we haven't got one.
Dimitri Fontaine and Robert Haas
They don't actually do anything yet; that will get fixed in a
follow-on commit. But this gets the basic infrastructure in place,
including CREATE/ALTER/DROP EVENT TRIGGER; support for COMMENT,
SECURITY LABEL, and ALTER EXTENSION .. ADD/DROP EVENT TRIGGER;
pg_dump and psql support; and documentation for the anticipated
initial feature set.
Dimitri Fontaine, with review and a bunch of additional hacking by me.
Thom Brown extensively reviewed earlier versions of this patch set,
but there's not a whole lot of that code left in this commit, as it
turns out.
Formerly, when trying to copy both indexes and comments, CREATE TABLE LIKE
had to pre-assign names to indexes that had comments, because it made up an
explicit CommentStmt command to apply the comment and so it had to know the
name for the index. This creates bad interactions with other indexes, as
shown in bug #6734 from Daniele Varrazzo: the preassignment logic couldn't
take any other indexes into account so it could choose a conflicting name.
To fix, add a field to IndexStmt that allows it to carry a comment to be
assigned to the new index. (This isn't a user-exposed feature of CREATE
INDEX, only an internal option.) Now we don't need preassignment of index
names in any situation.
I also took the opportunity to refactor DefineIndex to accept the IndexStmt
as such, rather than passing all its fields individually in a mile-long
parameter list.
Back-patch to 9.2, but no further, because it seems too dangerous to change
IndexStmt or DefineIndex's API in released branches. The bug exists back
to 9.0 where CREATE TABLE LIKE grew the ability to copy comments, but given
the lack of prior complaints we'll just let it go unfixed before 9.2.
The callers of UtilityContainsQuery want it to return a non-utility Query
if it returns anything at all. However, since we made CREATE TABLE
AS/SELECT INTO into a utility command instead of a variant of SELECT,
a command like "EXPLAIN SELECT INTO" results in two nested utility
statements. So what we need UtilityContainsQuery to do is drill down
to the bottom non-utility Query.
I had thought of this possibility in setrefs.c, and fixed it there by
looping around the UtilityContainsQuery call; but overlooked that the call
sites in plancache.c have a similar issue. In those cases it's
notationally inconvenient to provide an external loop, so let's redefine
UtilityContainsQuery as recursing down to a non-utility Query instead.
Noted by Rushabh Lathia. This is a somewhat cleaned-up version of his
proposed patch.
Making this operation look like a utility statement seems generally a good
idea, and particularly so in light of the desire to provide command
triggers for utility statements. The original choice of representing it as
SELECT with an IntoClause appendage had metastasized into rather a lot of
places, unfortunately, so that this patch is a great deal more complicated
than one might at first expect.
In particular, keeping EXPLAIN working for SELECT INTO and CREATE TABLE AS
subcommands required restructuring some EXPLAIN-related APIs. Add-on code
that calls ExplainOnePlan or ExplainOneUtility, or uses
ExplainOneQuery_hook, will need adjustment.
Also, the cases PREPARE ... SELECT INTO and CREATE RULE ... SELECT INTO,
which formerly were accepted though undocumented, are no longer accepted.
The PREPARE case can be replaced with use of CREATE TABLE AS EXECUTE.
The CREATE RULE case doesn't seem to have much real-world use (since the
rule would work only once before failing with "table already exists"),
so we'll not bother with that one.
Both SELECT INTO and CREATE TABLE AS still return a command tag of
"SELECT nnnn". There was some discussion of returning "CREATE TABLE nnnn",
but for the moment backwards compatibility wins the day.
Andres Freund and Tom Lane
ALTER TABLE (and ALTER VIEW, ALTER SEQUENCE, etc.) now use a
RangeVarGetRelid callback to check permissions before acquiring a table
lock. We also now use the same callback for all forms of ALTER TABLE,
rather than having separate, almost-identical callbacks for ALTER TABLE
.. SET SCHEMA and ALTER TABLE .. RENAME, and no callback at all for
everything else.
I went ahead and changed the code so that no form of ALTER TABLE works
on foreign tables; you must use ALTER FOREIGN TABLE instead. In 9.1,
it was possible to use ALTER TABLE .. SET SCHEMA or ALTER TABLE ..
RENAME on a foreign table, but not any other form of ALTER TABLE, which
did not seem terribly useful or consistent.
Patch by me; review by Noah Misch.
ALTER DOMAIN / DROP CONSTRAINT on a nonexistent constraint name did
not report any error. Now it reports an error. The IF EXISTS option
was added to get the usual behavior of ignoring nonexistent objects to
drop.
In the previous coding, callers were faced with an awkward choice:
look up the name, do permissions checks, and then lock the table; or
look up the name, lock the table, and then do permissions checks.
The first choice was wrong because the results of the name lookup
and permissions checks might be out-of-date by the time the table
lock was acquired, while the second allowed a user with no privileges
to interfere with access to a table by users who do have privileges
(e.g. if a malicious backend queues up for an AccessExclusiveLock on
a table on which AccessShareLock is already held, further attempts
to access the table will be blocked until the AccessExclusiveLock
is obtained and the malicious backend's transaction rolls back).
To fix, allow callers of RangeVarGetRelid() to pass a callback which
gets executed after performing the name lookup but before acquiring
the relation lock. If the name lookup is retried (because
invalidation messages are received), the callback will be re-executed
as well, so we get the best of both worlds. RangeVarGetRelid() is
renamed to RangeVarGetRelidExtended(); callers not wishing to supply
a callback can continue to invoke it as RangeVarGetRelid(), which is
now a macro. Since the only one caller that uses nowait = true now
passes a callback anyway, the RangeVarGetRelid() macro defaults nowait
as well. The callback can also be used for supplemental locking - for
example, REINDEX INDEX needs to acquire the table lock before the index
lock to reduce deadlock possibilities.
There's a lot more work to be done here to fix all the cases where this
can be a problem, but this commit provides the general infrastructure
and fixes the following specific cases: REINDEX INDEX, REINDEX TABLE,
LOCK TABLE, and and DROP TABLE/INDEX/SEQUENCE/VIEW/FOREIGN TABLE.
Per discussion with Noah Misch and Alvaro Herrera.
This gets rid of an impressive amount of duplicative code, with only
minimal behavior changes. DROP FOREIGN DATA WRAPPER now requires object
ownership rather than superuser privileges, matching the documentation
we already have. We also eliminate the historical warning about dropping
a built-in function as unuseful. All operations are now performed in the
same order for all object types handled by dropcmds.c.
KaiGai Kohei, with minor revisions by me
This gets rid of a significant amount of duplicative code.
KaiGai Kohei, reviewed in earlier versions by Dimitri Fontaine, with
further review and cleanup by me.
In the previous coding, we would look up a relation in RangeVarGetRelid,
lock the resulting OID, and then AcceptInvalidationMessages(). While
this was sufficient to ensure that we noticed any changes to the
relation definition before building the relcache entry, it didn't
handle the possibility that the name we looked up no longer referenced
the same OID. This was particularly problematic in the case where a
table had been dropped and recreated: we'd latch on to the entry for
the old relation and fail later on. Now, we acquire the relation lock
inside RangeVarGetRelid, and retry the name lookup if we notice that
invalidation messages have been processed meanwhile. Many operations
that would previously have failed with an error in the presence of
concurrent DDL will now succeed.
There is a good deal of work remaining to be done here: many callers
of RangeVarGetRelid still pass NoLock for one reason or another. In
addition, nothing in this patch guards against the possibility that
the meaning of an unqualified name might change due to the creation
of a relation in a schema earlier in the user's search path than the
one where it was previously found. Furthermore, there's nothing at
all here to guard against similar race conditions for non-relations.
For all that, it's a start.
Noah Misch and Robert Haas
This means that they can initially be added to a large existing table
without checking its initial contents, but new tuples must comply to
them; a separate pass invoked by ALTER TABLE / VALIDATE can verify
existing data and ensure it complies with the constraint, at which point
it is marked validated and becomes a normal part of the table ecosystem.
An non-validated CHECK constraint is ignored in the planner for
constraint_exclusion purposes; when validated, cached plans are
recomputed so that partitioning starts working right away.
This patch also enables domains to have unvalidated CHECK constraints
attached to them as well by way of ALTER DOMAIN / ADD CONSTRAINT / NOT
VALID, which can later be validated with ALTER DOMAIN / VALIDATE
CONSTRAINT.
Thanks to Thom Brown, Dean Rasheed and Jaime Casanova for the various
reviews, and Robert Hass for documentation wording improvement
suggestions.
This patch was sponsored by Enova Financial.
Per bug #5988, reported by Marko Tiikkaja, and further analyzed by Tom
Lane, the previous coding was broken in several respects: even if the
target table already existed, a subsequent CREATE TABLE IF NOT EXISTS
might try to add additional constraints or sequences-for-serial
specified in the new CREATE TABLE statement.
In passing, this also fixes a minor information leak: it's no longer
possible to figure out whether a schema to which you don't have CREATE
access contains a sequence named like "x_y_seq" by attempting to create a
table in that schema called "x" with a serial column called "y".
Some more refactoring of this code in the future might be warranted,
but that will need to wait for a later major release.
This patch implements data-modifying WITH queries according to the
semantics that the updates all happen with the same command counter value,
and in an unspecified order. Therefore one WITH clause can't see the
effects of another, nor can the outer query see the effects other than
through the RETURNING values. And attempts to do conflicting updates will
have unpredictable results. We'll need to document all that.
This commit just fixes the code; documentation updates are waiting on
author.
Marko Tiikkaja and Hitoshi Harada
- collowner field
- CREATE COLLATION
- ALTER COLLATION
- DROP COLLATION
- COMMENT ON COLLATION
- integration with extensions
- pg_dump support for the above
- dependency management
- psql tab completion
- psql \dO command
This follows recent discussions, so it's quite a bit different from
Dimitri's original. There will probably be more changes once we get a bit
of experience with it, but let's get it in and start playing with it.
This is still just core code. I'll start converting contrib modules
shortly.
Dimitri Fontaine and Tom Lane
This is an essential component of making the extension feature usable;
first because it's needed in the process of converting an existing
installation containing "loose" objects of an old contrib module into
the extension-based world, and second because we'll have to use it
in pg_dump --binary-upgrade, as per recent discussion.
Loosely based on part of Dimitri Fontaine's ALTER EXTENSION UPGRADE
patch.
This patch adds the server infrastructure to support extensions.
There is still one significant loose end, namely how to make it play nice
with pg_upgrade, so I am not yet committing the changes that would make
all the contrib modules depend on this feature.
In passing, fix a disturbingly large amount of breakage in
AlterObjectNamespace() and callers.
Dimitri Fontaine, reviewed by Anssi Kääriäinen,
Itagaki Takahiro, Tom Lane, and numerous others
Until now, our Serializable mode has in fact been what's called Snapshot
Isolation, which allows some anomalies that could not occur in any
serialized ordering of the transactions. This patch fixes that using a
method called Serializable Snapshot Isolation, based on research papers by
Michael J. Cahill (see README-SSI for full references). In Serializable
Snapshot Isolation, transactions run like they do in Snapshot Isolation,
but a predicate lock manager observes the reads and writes performed and
aborts transactions if it detects that an anomaly might occur. This method
produces some false positives, ie. it sometimes aborts transactions even
though there is no anomaly.
To track reads we implement predicate locking, see storage/lmgr/predicate.c.
Whenever a tuple is read, a predicate lock is acquired on the tuple. Shared
memory is finite, so when a transaction takes many tuple-level locks on a
page, the locks are promoted to a single page-level lock, and further to a
single relation level lock if necessary. To lock key values with no matching
tuple, a sequential scan always takes a relation-level lock, and an index
scan acquires a page-level lock that covers the search key, whether or not
there are any matching keys at the moment.
A predicate lock doesn't conflict with any regular locks or with another
predicate locks in the normal sense. They're only used by the predicate lock
manager to detect the danger of anomalies. Only serializable transactions
participate in predicate locking, so there should be no extra overhead for
for other transactions.
Predicate locks can't be released at commit, but must be remembered until
all the transactions that overlapped with it have completed. That means that
we need to remember an unbounded amount of predicate locks, so we apply a
lossy but conservative method of tracking locks for committed transactions.
If we run short of shared memory, we overflow to a new "pg_serial" SLRU
pool.
We don't currently allow Serializable transactions in Hot Standby mode.
That would be hard, because even read-only transactions can cause anomalies
that wouldn't otherwise occur.
Serializable isolation mode now means the new fully serializable level.
Repeatable Read gives you the old Snapshot Isolation level that we have
always had.
Kevin Grittner and Dan Ports, reviewed by Jeff Davis, Heikki Linnakangas and
Anssi Kääriäinen
Foreign tables are a core component of SQL/MED. This commit does
not provide a working SQL/MED infrastructure, because foreign tables
cannot yet be queried. Support for foreign table scans will need to
be added in a future patch. However, this patch creates the necessary
system catalog structure, syntax support, and support for ancillary
operations such as COMMENT and SECURITY LABEL.
Shigeru Hanada, heavily revised by Robert Haas
This adds support for changing the schema of a conversion, operator,
operator class, operator family, text search configuration, text search
dictionary, text search parser, or text search template.
Dimitri Fontaine, with assorted corrections and other kibitzing.
After much expenditure of effort, we've got this to the point where the
performance penalty is pretty minimal in typical cases.
Andrew Dunstan, reviewed by Brendan Jurd, Dean Rasheed, and Tom Lane
This is intended as infrastructure to support integration with label-based
mandatory access control systems such as SE-Linux. Further changes (mostly
hooks) will be needed, but this is a big chunk of it.
KaiGai Kohei and Robert Haas
The implicitly created sequence was created as owned by the current user,
who could be different from the table owner, eg if current user is a
superuser or some member of the table's owning role. This caused sanity
checks in the SEQUENCE OWNED BY code to spit up. Although possibly we
don't need those sanity checks, the safest fix seems to be to make sure
the implicit sequence is assigned the same owner role as the table has.
(We still do all permissions checks as the current user, however.)
Per report from Josh Berkus.
Back-patch to 9.0. The bug goes back to the invention of SEQUENCE OWNED BY
in 8.2, but the fix requires an API change for DefineRelation(), which seems
to have potential for breaking third-party code if done in a minor release.
Given the lack of prior complaints, it's probably not worth fixing in the
stable branches.
Add some checks that seem logically necessary, in particular let's make
real sure that HS slave sessions cannot create temp tables. (If they did
they would think that temp tables belonging to the master's session with
the same BackendId were theirs. We *must* not allow myTempNamespace to
become set in a slave session.)
Change setval() and nextval() so that they are only allowed on temp sequences
in a read-only transaction. This seems consistent with what we allow for
table modifications in read-only transactions. Since an HS slave can't have a
temp sequence, this also provides a nicer cure for the setval PANIC reported
by Erik Rijkers.
Make the error messages more uniform, and have them mention the specific
command being complained of. This seems worth the trifling amount of extra
code, since people are likely to see such messages a lot more than before.
In addition, add support for a "payload" string to be passed along with
each notify event.
This implementation should be significantly more efficient than the old one,
and is also more compatible with Hot Standby usage. There is not yet any
facility for HS slaves to receive notifications generated on the master,
although such a thing is possible in future.
Joachim Wieland, reviewed by Jeff Davis; also hacked on by me.
The purpose of this change is to eliminate the need for every caller
of SearchSysCache, SearchSysCacheCopy, SearchSysCacheExists,
GetSysCacheOid, and SearchSysCacheList to know the maximum number
of allowable keys for a syscache entry (currently 4). This will
make it far easier to increase the maximum number of keys in a
future release should we choose to do so, and it makes the code
shorter, too.
Design and review by Tom Lane.
pg_constraint before searching pg_trigger. This allows saner handling of
corner cases; in particular we now say "constraint is not deferrable"
rather than "constraint does not exist" when the command is applied to
a constraint that's inherently non-deferrable. Per a gripe several months
ago from hubert depesz lubaczewski.
To make this work without breaking user-defined constraint triggers,
we have to add entries for them to pg_constraint. However, in return
we can remove the pgconstrname column from pg_constraint, which represents
a fairly sizable space savings. I also replaced the tgisconstraint column
with tgisinternal; the old meaning of tgisconstraint can now be had by
testing for nonzero tgconstraint, while there is no other way to get
the old meaning of nonzero tgconstraint, namely that the trigger was
internally generated rather than being user-created.
In passing, fix an old misstatement in the docs and comments, namely that
pg_trigger.tgdeferrable is exactly redundant with pg_constraint.condeferrable.
Actually, we mark RI action triggers as nondeferrable even when they belong to
a nominally deferrable FK constraint. The SET CONSTRAINTS code now relies on
that instead of hard-coding a list of exception OIDs.
parse analysis phase, rather than at execution time. This makes parameter
handling work the same as it does in ordinary plannable queries, and in
particular fixes the incompatibility that Pavel pointed out with plpgsql's
new handling of variable references. plancache.c gets a little bit
grottier, but the alternatives seem worse.
This patch only supports seq_page_cost and random_page_cost as parameters,
but it provides the infrastructure to scalably support many more.
In particular, we may want to add support for effective_io_concurrency,
but I'm leaving that as future work for now.
Thanks to Tom Lane for design help and Alvaro Herrera for the review.
Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
an allegedly immutable index function. It was previously recognized that
we had to prevent such a function from executing SET/RESET ROLE/SESSION
AUTHORIZATION, or it could trivially obtain the privileges of the session
user. However, since there is in general no privilege checking for changes
of session-local state, it is also possible for such a function to change
settings in a way that might subvert later operations in the same session.
Examples include changing search_path to cause an unexpected function to
be called, or replacing an existing prepared statement with another one
that will execute a function of the attacker's choosing.
The present patch secures VACUUM, ANALYZE, and CREATE INDEX/REINDEX against
these threats, which are the same places previously deemed to need protection
against the SET ROLE issue. GUC changes are still allowed, since there are
many useful cases for that, but we prevent security problems by forcing a
rollback of any GUC change after completing the operation. Other cases are
handled by throwing an error if any change is attempted; these include temp
table creation, closing a cursor, and creating or deleting a prepared
statement. (In 7.4, the infrastructure to roll back GUC changes doesn't
exist, so we settle for rejecting changes of "search_path" in these contexts.)
Original report and patch by Gurjeet Singh, additional analysis by
Tom Lane.
Security: CVE-2009-4136
support any indexable commutative operator, not just equality. Two rows
violate the exclusion constraint if "row1.col OP row2.col" is TRUE for
each of the columns in the constraint.
Jeff Davis, reviewed by Robert Haas
checked to determine whether the trigger should be fired.
For BEFORE triggers this is mostly a matter of spec compliance; but for AFTER
triggers it can provide a noticeable performance improvement, since queuing of
a deferred trigger event and re-fetching of the row(s) at end of statement can
be short-circuited if the trigger does not need to be fired.
Takahiro Itagaki, reviewed by KaiGai Kohei.
adopted for EXPLAIN. This will allow additional options to be implemented
in future without having to make them fully-reserved keywords. The old syntax
remains available for existing options, however.
Itagaki Takahiro
a lot of strange behaviors that occurred in join cases. We now identify the
"current" row for every joined relation in UPDATE, DELETE, and SELECT FOR
UPDATE/SHARE queries. If an EvalPlanQual recheck is necessary, we jam the
appropriate row into each scan node in the rechecking plan, forcing it to emit
only that one row. The former behavior could rescan the whole of each joined
relation for each recheck, which was terrible for performance, and what's much
worse could result in duplicated output tuples.
Also, the original implementation of EvalPlanQual could not re-use the recheck
execution tree --- it had to go through a full executor init and shutdown for
every row to be tested. To avoid this overhead, I've associated a special
runtime Param with each LockRows or ModifyTable plan node, and arranged to
make every scan node below such a node depend on that Param. Thus, by
signaling a change in that Param, the EPQ machinery can just rescan the
already-built test plan.
This patch also adds a prohibition on set-returning functions in the
targetlist of SELECT FOR UPDATE/SHARE. This is needed to avoid the
duplicate-output-tuple problem. It seems fairly reasonable since the
other restrictions on SELECT FOR UPDATE are meant to ensure that there
is a unique correspondence between source tuples and result tuples,
which an output SRF destroys as much as anything else does.
the privileges that will be applied to subsequently-created objects.
Such adjustments are always per owning role, and can be restricted to objects
created in particular schemas too. A notable benefit is that users can
override the traditional default privilege settings, eg, the PUBLIC EXECUTE
privilege traditionally granted by default for functions.
Petr Jelinek
to create a function for it.
Procedural languages now have an additional entry point, namely a function
to execute an inline code block. This seemed a better design than trying
to hide the transient-ness of the code from the PL. As of this patch, only
plpgsql has an inline handler, but probably people will soon write handlers
for the other standard PLs.
In passing, remove the long-dead LANCOMPILER option of CREATE LANGUAGE.
Petr Jelinek
The current implementation fires an AFTER ROW trigger for each tuple that
looks like it might be non-unique according to the index contents at the
time of insertion. This works well as long as there aren't many conflicts,
but won't scale to massive unique-key reassignments. Improving that case
is a TODO item.
Dean Rasheed
conindid is the index supporting a constraint. We can use this not only for
unique/primary-key constraints, but also foreign-key constraints, which
depend on the unique index that constrains the referenced columns.
tgconstrindid is just copied from the constraint's conindid field, or is
zero for triggers not associated with constraints.
This is mainly intended as infrastructure for upcoming patches, but it has
some virtue in itself, since it exposes a relationship that you formerly
had to grovel in pg_depend to determine. I simplified one information_schema
view accordingly. (There is a pg_dump query that could also use conindid,
but I left it alone because it wasn't clear it'd get any faster.)
The original syntax made it difficult to add options without making them
into reserved words. This change parenthesizes the options to avoid that
problem, and makes provision for an explicit (and perhaps non-Boolean)
value for each option. The original syntax is still supported, but only
for the two original options ANALYZE and VERBOSE.
As a test case, add a COSTS option that can suppress the planner cost
estimates. This may be useful for including EXPLAIN output in the regression
tests, which are otherwise unable to cope with cross-platform variations in
cost estimates.
Robert Haas
This alters various incidental uses of C++ key words to use other similar
identifiers, so that a C++ compiler won't choke outright. You still
(probably) need extern "C" { }; around the inclusion of backend headers.
based on a patch by Kurt Harriman <harriman@acm.org>
Also add a script cpluspluscheck to check for C++ compatibility in the
future. As of right now, this passes without error for me.
a toast table to be built, even if the sum-of-column-widths calculation
indicates one isn't needed. This is needed by pg_migrator because if the
old table has a toast table, we have to migrate over the toast table since
it might contain some live data, even though subsequent column drops could
mean that no recently-added rows could require toasting.
qualifier, and add support for this in pg_dump.
This allows TOAST tables to have user-defined fillfactor, and will also
enable us to move the autovacuum parameters to reloptions without taking
away the possibility of setting values for TOAST tables.
This doesn't do any remote or external things yet, but it gives modules
like plproxy and dblink a standardized and future-proof system for
managing their connection information.
Martin Pihlak and Peter Eisentraut
SELECT foo.*) so that it cannot be confused with a quoted identifier "*".
Instead create a separate node type A_Star to represent this notation.
Per pgsql-hackers discussion of 2007-Sep-27.
main tables.
This requires vacuum() to accept processing a toast table standalone, so
there's a user-visible change in that it's now possible (for a superuser) to
execute "VACUUM pg_toast.pg_toast_XXX".
a portal are never NULL, but reliably provide the source text of the query.
It turns out that there was only one place that was really taking a short-cut,
which was the 'EXECUTE' utility statement. That doesn't seem like a
sufficiently critical performance hotspot to justify not offering a guarantee
of validity of the portal source text. Fix it to copy the source text over
from the cached plan. Add Asserts in the places that set up cached plans and
portals to reject null source strings, and simplify a bunch of places that
formerly needed to guard against nulls.
There may be a few places that cons up statements for execution without
having any source text at all; I found one such in ConvertTriggerToFK().
It seems sufficient to inject a phony source string in such a case,
for instance
ProcessUtility((Node *) atstmt,
"(generated ALTER TABLE ADD FOREIGN KEY command)",
NULL, false, None_Receiver, NULL);
We should take a second look at the usage of debug_query_string,
particularly the recently added current_query() SQL function.
ITAGAKI Takahiro and Tom Lane
grammar allows ALTER TABLE/INDEX/SEQUENCE/VIEW interchangeably for all
subforms of those commands, and then we sort out what's really legal
at execution time. This allows the ALTER SEQUENCE/VIEW reference pages
to fully document all the ALTER forms available for sequences and views
respectively, and eliminates a longstanding cause of confusion for users.
The net effect is that the following forms are allowed that weren't before:
ALTER SEQUENCE OWNER TO
ALTER VIEW ALTER COLUMN SET/DROP DEFAULT
ALTER VIEW OWNER TO
ALTER VIEW SET SCHEMA
(There's no actual functionality gain here, but formerly you had to say
ALTER TABLE instead.)
Interestingly, the grammar tables actually get smaller, probably because
there are fewer special cases to keep track of.
I did not disallow using ALTER TABLE for these operations. Perhaps we
should, but there's a backwards-compatibility issue if we do; in fact
it would break existing pg_dump scripts. I did however tighten up
ALTER SEQUENCE and ALTER VIEW to reject non-sequences and non-views
in the new cases as well as a couple of cases where they didn't before.
The patch doesn't change pg_dump to use the new syntaxes, either.
objects are specified, we drop them all in a single performMultipleDeletions
call. This makes the RESTRICT/CASCADE checks more relaxed: it's not counted
as a cascade if one of the later objects has a dependency on an earlier one.
NOTICE messages about such cases go away, too.
In passing, fix the permissions check for DROP CONVERSION, which for some
reason was never made role-aware, and omitted the namespace-owner exemption
too.
Alex Hunsaker, with further fiddling by me.
constraint status of copied indexes (bug #3774), as well as various other
small bugs such as failure to pstrdup when needed. Allow INCLUDING INDEXES
indexes to be merged with identical declared indexes (perhaps not real useful,
but the code is there and having it not apply to LIKE indexes seems pretty
unorthogonal). Avoid useless work in generateClonedIndexStmt(). Undo some
poorly chosen API changes, and put a couple of routines in modules that seem
to be better places for them.
(Actually, it works as a plain statement too, but I didn't document that
because it seems a bit useless.) Unify VariableResetStmt with
VariableSetStmt, and clean up some ancient cruft in the representation of
same.
Oleg Bartunov and Teodor Sigaev, but I did a lot of editorializing,
so anything that's broken is probably my fault.
Documentation is nonexistent as yet, but let's land the patch so we can
get some portability testing done.
Sequences and views could previously be renamed using ALTER TABLE, but
this was a repeated source of confusion for users. Update the docs,
and psql tab completion. Patch from David Fetter; various minor fixes
by myself.
over a fairly long period of time, rather than being spat out in a burst.
This happens only for background checkpoints carried out by the bgwriter;
other cases, such as a shutdown checkpoint, are still done at full speed.
Remove the "all buffers" scan in the bgwriter, and associated stats
infrastructure, since this seems no longer very useful when the checkpoint
itself is properly throttled.
Original patch by Itagaki Takahiro, reworked by Heikki Linnakangas,
and some minor API editorialization by me.
(which now deals only in optimizable statements), and put that code
into a new file parser/parse_utilcmd.c. This helps clarify and enforce
the design rule that utility statements shouldn't be processed during
the regular parse analysis phase; all interpretation of their meaning
should happen after they are given to ProcessUtility to execute.
(We need this because we don't retain any locks for a utility statement
that's in a plan cache, nor have any way to detect that it's stale.)
We are also able to simplify the API for parse_analyze() and related
routines, because they will now always return exactly one Query structure.
In passing, fix bug #3403 concerning trying to add a serial column to
an existing temp table (this is largely Heikki's work, but we needed
all that restructuring to make it safe).
buffers, rather than blowing out the whole shared-buffer arena. Aside from
avoiding cache spoliation, this fixes the problem that VACUUM formerly tended
to cause a WAL flush for every page it modified, because we had it hacked to
use only a single buffer. Those flushes will now occur only once per
ring-ful. The exact ring size, and the threshold for seqscans to switch into
the ring usage pattern, remain under debate; but the infrastructure seems
done. The key bit of infrastructure is a new optional BufferAccessStrategy
object that can be passed to ReadBuffer operations; this replaces the former
StrategyHintVacuum API.
This patch also changes the buffer usage-count methodology a bit: we now
advance usage_count when first pinning a buffer, rather than when last
unpinning it. To preserve the behavior that a buffer's lifetime starts to
decrease when it's released, the clock sweep code is modified to not decrement
usage_count of pinned buffers.
Work not done in this commit: teach GiST and GIN indexes to use the vacuum
BufferAccessStrategy for vacuum-driven fetches.
Original patch by Simon, reworked by Heikki and again by Tom.
types of unspecified parameters when submitted via extended query protocol.
This worked in 8.2 but I had broken it during plancache changes. DECLARE
CURSOR is now treated almost exactly like a plain SELECT through parse
analysis, rewrite, and planning; only just before sending to the executor
do we divert it away to ProcessUtility. This requires a special-case check
in a number of places, but practically all of them were already special-casing
SELECT INTO, so it's not too ugly. (Maybe it would be a good idea to merge
the two by treating IntoClause as a form of utility statement? Not going to
worry about that now, though.) That approach doesn't work for EXPLAIN,
however, so for that I punted and used a klugy solution of running parse
analysis an extra time if under extended query protocol.
RESET SESSION, RESET PLANS, and RESET TEMP are now DISCARD ALL,
DISCARD PLANS, and DISCARD TEMP, respectively. This is to avoid
confusion with the pre-existing RESET variants: the DISCARD
commands are not actually similar to RESET. Patch from Marko
Kreen, with some minor editorialization.
reviewed by Neil Conway. This patch adds the following DDL command
variants: RESET SESSION, RESET TEMP, RESET PLANS, CLOSE ALL, and
DEALLOCATE ALL. RESET SESSION is intended for use by connection
pool software and the like, in order to reset a client session
to something close to its initial state.
Note that while most of these command variants can be executed
inside a transaction block (but are not transaction-aware!),
RESET SESSION cannot. While this is inconsistent, it is intended
to catch programmer mistakes: RESET SESSION in an open transaction
block is probably unintended.
A DBA is allowed to create a language in his database if it's marked
"tmpldbacreate" in pg_pltemplate. The factory default is that this is set
for all standard trusted languages, but of course a superuser may adjust
the settings. In service of this, add the long-foreseen owner column to
pg_language; renaming, dropping, and altering owner of a PL now follow
normal ownership rules instead of being superuser-only.
Jeremy Drake, with some editorialization by Tom Lane.
module and teach PREPARE and protocol-level prepared statements to use it.
In service of this, rearrange utility-statement processing so that parse
analysis does not assume table schemas can't change before execution for
utility statements (necessary because we don't attempt to re-acquire locks
for utility statements when reusing a stored plan). This requires some
refactoring of the ProcessUtility API, but it ends up cleaner anyway,
for instance we can get rid of the QueryContext global.
Still to do: fix up SPI and related code to use the plan cache; I'm tempted to
try to make SQL functions use it too. Also, there are at least some aspects
of system state that we want to ensure remain the same during a replan as in
the original processing; search_path certainly ought to behave that way for
instance, and perhaps there are others.
storing mostly-redundant Query trees in prepared statements, portals, etc.
To replace Query, a new node type called PlannedStmt is inserted by the
planner at the top of a completed plan tree; this carries just the fields of
Query that are still needed at runtime. The statement lists kept in portals
etc. now consist of intermixed PlannedStmt and bare utility-statement nodes
--- no Query. This incidentally allows us to remove some fields from Query
and Plan nodes that shouldn't have been there in the first place.
Still to do: simplify the execution-time range table; at the moment the
range table passed to the executor still contains Query trees for subqueries.
initdb forced due to change of stored rules.
equality checks it applies, instead of a random dependence on whatever
operators might be named "=". The equality operators will now be selected
from the opfamily of the unique index that the FK constraint depends on to
enforce uniqueness of the referenced columns; therefore they are certain to be
consistent with that index's notion of equality. Among other things this
should fix the problem noted awhile back that pg_dump may fail for foreign-key
constraints on user-defined types when the required operators aren't in the
search path. This also means that the former warning condition about "foreign
key constraint will require costly sequential scans" is gone: if the
comparison condition isn't indexable then we'll reject the constraint
entirely. All per past discussions.
Along the way, make the RI triggers look into pg_constraint for their
information, instead of using pg_trigger.tgargs; and get rid of the always
error-prone fixed-size string buffers in ri_triggers.c in favor of building up
the RI queries in StringInfo buffers.
initdb forced due to columns added to pg_constraint and pg_trigger.
FAMILY; and add FAMILY option to CREATE OPERATOR CLASS to allow adding a
class to a pre-existing family. Per previous discussion. Man, what a
tedious lot of cutting and pasting ...
proposal. Parameter logging works even for binary-format parameters, and
logging overhead is avoided when disabled.
log_statement = all output for the src/test/examples/testlibpq3.c example
now looks like
LOG: statement: execute <unnamed>: SELECT * FROM test1 WHERE t = $1
DETAIL: parameters: $1 = 'joe''s place'
LOG: statement: execute <unnamed>: SELECT * FROM test1 WHERE i = $1::int4
DETAIL: parameters: $1 = '2'
and log_min_duration_statement = 0 results in
LOG: duration: 2.431 ms parse <unnamed>: SELECT * FROM test1 WHERE t = $1
LOG: duration: 2.335 ms bind <unnamed> to <unnamed>: SELECT * FROM test1 WHERE t = $1
DETAIL: parameters: $1 = 'joe''s place'
LOG: duration: 0.394 ms execute <unnamed>: SELECT * FROM test1 WHERE t = $1
DETAIL: parameters: $1 = 'joe''s place'
LOG: duration: 1.251 ms parse <unnamed>: SELECT * FROM test1 WHERE i = $1::int4
LOG: duration: 0.566 ms bind <unnamed> to <unnamed>: SELECT * FROM test1 WHERE i = $1::int4
DETAIL: parameters: $1 = '2'
LOG: duration: 0.173 ms execute <unnamed>: SELECT * FROM test1 WHERE i = $1::int4
DETAIL: parameters: $1 = '2'
(This example demonstrates the folly of ignoring parse/bind steps for duration
logging purposes, BTW.)
Along the way, create a less ad-hoc mechanism for determining which commands
are logged by log_statement = mod and log_statement = ddl. The former coding
was actually missing quite a few things that look like ddl to me, and it
did not handle EXECUTE or extended query protocol correctly at all.
This commit does not do anything about the question of whether log_duration
should be removed or made less redundant with log_min_duration_statement.
such as debugging and performance measurement. This consists of two features:
a table of "rendezvous variables" that allows separately-loaded shared
libraries to communicate, and a new GUC setting "local_preload_libraries"
that allows libraries to be loaded into specific sessions without explicit
cooperation from the client application. To make local_preload_libraries
as flexible as possible, we do not restrict its use to superusers; instead,
it is restricted to load only libraries stored in $libdir/plugins/. The
existing LOAD command has also been modified to allow non-superusers to
LOAD libraries stored in this directory.
This patch also renames the existing GUC variable preload_libraries to
shared_preload_libraries (after a suggestion by Simon Riggs) and does some
code refactoring in dfmgr.c to improve clarity.
Korry Douglas, with a little help from Tom Lane.
merely a matter of fixing the error check, since the underlying Portal
infrastructure already handles it. This in turn allows these statements
to be used in some existing plpgsql and plperl contexts, such as a
plpgsql FOR loop. Also, do some marginal code cleanup in places that
were being sloppy about distinguishing SELECT from SELECT INTO.
plpgsql support to come later. Along the way, convert execMain's
SELECT INTO support into a DestReceiver, in order to eliminate some ugly
special cases.
Jonah Harris and Tom Lane
created in the bootstrap phase proper, rather than added after-the-fact
by initdb. This is cleaner than before because it allows us to retire the
undocumented ALTER TABLE ... CREATE TOAST TABLE command, but the real reason
I'm doing it is so that toast tables of shared catalogs will now have
predetermined OIDs. This will allow a reasonably clean solution to the
problem of locking tables before we load their relcache entries, to appear
in a forthcoming patch.
support both FOR UPDATE and FOR SHARE in one command, as well as both
NOWAIT and normal WAIT behavior. The more general code is actually
simpler and cleaner.
CREATE AGGREGATE aggname (input_type) (parameter_list)
along with the old syntax where the input type was named in the parameter
list. This fits more naturally with the way that the aggregate is identified
in DROP AGGREGATE and other utility commands; furthermore it has a natural
extension to handle multiple-input aggregates, where the basetype-parameter
method would get ugly. In fact, this commit fixes the grammar and all the
utility commands to support multiple-input aggregates; but DefineAggregate
rejects it because the executor isn't fixed yet.
I didn't do anything about treating agg(*) as a zero-input aggregate instead
of artificially making it a one-input aggregate, but that should be considered
in combination with supporting multi-input aggregates.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
process of dropping roles by dropping objects owned by them and privileges
granted to them, or giving the owned objects to someone else, through the
use of the data stored in the new pg_shdepend catalog.
Some refactoring of the GRANT/REVOKE code was needed, as well as ALTER OWNER
code. Further cleanup of code duplication in the GRANT code seems necessary.
Implemented by me after an idea from Tom Lane, who also provided various kind
of implementation advice.
Regression tests pass. Some tests for the new functionality are also added,
as well as rudimentary documentation.
