This reverts commits 24c35ec and 57169ad. PreRestoreCommand() and
PostRestoreCommand() need to be put closer to the system() call calling
a restore_command, as they enable in_restore_command for the startup
process which would in turn trigger an immediate proc_exit() in the
SIGTERM handler. Perhaps we could get rid of this behavior entirely,
but 24c35ec has made the window where the flag is enabled much larger
than it was, and any Postgres-like actions (palloc, etc.) taken by code
paths while the flag is enabled could lead to more severe issues in the
shutdown processing.
Note that curculio has showed that there are much more problems in this
area, unrelated to this change, actually, hence the issues related to
that had better be addressed first. Keeping the code of HEAD in line
with the stable branches should make that a bit easier.
Per discussion with Andres Freund and Nathan Bossart.
Discussion: https://postgr.es/m/Y979NR3U5VnWrTwB@paquier.xyz
This allows underscores to be used in integer and numeric literals,
and their corresponding type input functions, for visual grouping.
For example:
1_500_000_000
3.14159_26535_89793
0xffff_ffff
0b_1001_0001
A single underscore is allowed between any 2 digits, or immediately
after the base prefix indicator of non-decimal integers, per SQL:202x
draft.
Peter Eisentraut and Dean Rasheed
Discussion: https://postgr.es/m/84aae844-dc55-a4be-86d9-4f0fa405cc97%40enterprisedb.com
Presently, restore_command uses a different code path than
archive_cleanup_command and recovery_end_command. These code paths
are similar and can be easily combined, as long as it is possible to
identify if a command should:
- Issue a FATAL on signal.
- Exit immediately on SIGTERM.
While on it, this removes src/common/archive.c and its associated
header. Since the introduction of c96de2c, BuildRestoreCommand() has
become a simple wrapper of replace_percent_placeholders() able to call
make_native_path(). This simplifies shell_restore.c as long as
RestoreArchivedFile() includes a call to make_native_path().
Author: Nathan Bossart
Reviewed-by: Andres Freund, Michael Paquier
Discussion: https://postgr.es/m/20221227192449.GA3672473@nathanxps13
There are a number of places where a shell command is constructed with
percent-placeholders (like %x). It's cumbersome to have to open-code
this several times. This factors out this logic into a separate
function. This also allows us to ensure consistency for and document
some subtle behaviors, such as what to do with unrecognized
placeholders.
The unified handling is now that incorrect and unknown placeholders
are an error, where previously in most cases they were skipped or
ignored. This affects the following settings:
- archive_cleanup_command
- archive_command
- recovery_end_command
- restore_command
- ssl_passphrase_command
The following settings are part of this refactoring but already had
stricter error handling and should be unchanged in their behavior:
- basebackup_to_shell.command
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5238bbed-0b01-83a6-d4b2-7eb0562a054e%40enterprisedb.com
VACUUM normally ends by running vac_update_datfrozenxid(), which
requires a scan of pg_class. Therefore, if one attempts to vacuum a
database one table at a time --- as vacuumdb has done since v12 ---
we will spend O(N^2) time in vac_update_datfrozenxid(). That causes
serious performance problems in databases with tens of thousands of
tables, and indeed the effect is measurable with only a few hundred.
To add insult to injury, only one process can run
vac_update_datfrozenxid at the same time per DB, so this behavior
largely defeats vacuumdb's -j option.
Hence, invent options SKIP_DATABASE_STATS and ONLY_DATABASE_STATS
to allow applications to postpone vac_update_datfrozenxid() until the
end of a series of VACUUM requests, and teach vacuumdb to use them.
Per bug #17717 from Gunnar L. Sadly, this answer doesn't seem
like something we'd consider back-patching, so the performance
problem will remain in v12-v15.
Tom Lane and Nathan Bossart
Discussion: https://postgr.es/m/17717-6c50eb1c7d23a886@postgresql.org
Add support for hexadecimal, octal, and binary integer literals:
0x42F
0o273
0b100101
per SQL:202x draft.
This adds support in the lexer as well as in the integer type input
functions.
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/b239564c-cad0-b23e-c57e-166d883cb97d@enterprisedb.com
This substantially speeds up building for windows, due to the vast amount of
headers included via windows.h. A cross build from linux targetting mingw goes
from
994.11user 136.43system 0:31.58elapsed 3579%CPU
to
422.41user 89.05system 0:14.35elapsed 3562%CPU
The wins on windows are similar-ish (but I don't have a system at hand just
now for actual numbers). Targetting other operating systems the wins are far
smaller (tested linux, macOS, FreeBSD).
For now precompiled headers are disabled by default, it's not clear how well
they work on all platforms. E.g. on FreeBSD gcc doesn't seem to have working
support, but clang does.
When doing a full build precompiled headers are only beneficial for targets
with multiple .c files, as meson builds a separate precompiled header for each
target (so that different compilation options take effect). This commit
therefore only changes target with at least two .c files to use precompiled
headers.
Because this commit adds b_pch=false to the default_options new build
directories will have precompiled headers disabled by default, however
existing build directories will continue use the default value of b_pch, which
is true.
Note that using precompiled headers with ccache requires setting
CCACHE_SLOPPINESS=pch_defines,time_macros to get hits.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CA+hUKG+50eOUbN++ocDc0Qnp9Pvmou23DSXu=ZA6fepOcftKqA@mail.gmail.com
Discussion: https://postgr.es/m/c5736f70-bb6d-8d25-e35c-e3d886e4e905@enterprisedb.com
Discussion: https://postgr.es/m/20190826054000.GE7005%40paquier.xyz
When using precompiled headers, we cannot pre-define macros for the system
headers from within .c files, as headers are already processed before
the #define in the C file is reached. But we can pre-define using
-DFD_SETSIZE, as long as that's also used when building the precompiled header.
A few files #define FD_SETSIZE 1024 on windows, as the default is only 64. I
am hesitant to change FD_SETSIZE globally on windows, due to
src/backend/port/win32/socket.c using it to size on-stack arrays. Instead add
-DFD_SETSIZE=1024 when building the specific targets needing it.
We likely should move away from using select() in those places, but that's a
larger change.
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20221005190829.lda7ttalh4mzrvf4@awork3.anarazel.de
Discussion: https://postgr.es/m/CA+hUKG+50eOUbN++ocDc0Qnp9Pvmou23DSXu=ZA6fepOcftKqA@mail.gmail.com
Discussion: https://postgr.es/m/20190826054000.GE7005%40paquier.xyz
There are still some alignment-related failures in the buildfarm,
which might or might not be able to be fixed quickly, but I've also
just realized that it increased the size of many WAL records by 4 bytes
because a block reference contains a RelFileLocator. The effect of that
hasn't been studied or discussed, so revert for now.
RelFileNumbers are now assigned using a separate counter, instead of
being assigned from the OID counter. This counter never wraps around:
if all 2^56 possible RelFileNumbers are used, an internal error
occurs. As the cluster is limited to 2^64 total bytes of WAL, this
limitation should not cause a problem in practice.
If the counter were 64 bits wide rather than 56 bits wide, we would
need to increase the width of the BufferTag, which might adversely
impact buffer lookup performance. Also, this lets us use bigint for
pg_class.relfilenode and other places where these values are exposed
at the SQL level without worrying about overflow.
This should remove the need to keep "tombstone" files around until
the next checkpoint when relations are removed. We do that to keep
RelFileNumbers from being recycled, but now that won't happen
anyway. However, this patch doesn't actually change anything in
this area; it just makes it possible for a future patch to do so.
Dilip Kumar, based on an idea from Andres Freund, who also reviewed
some earlier versions of the patch. Further review and some
wordsmithing by me. Also reviewed at various points by Ashutosh
Sharma, Vignesh C, Amul Sul, Álvaro Herrera, and Tom Lane.
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in optimizer, parser,
utility, libpq, and "commands" code, as well as in remaining library
code. Do the same for all code related to frontend programs (with the
exception of pg_dump/pg_dumpall related code).
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will handle
ecpg and pg_dump/pg_dumpall.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
More than twenty years ago (79fcde48b), we hacked the postmaster
to avoid a core-dump on systems that didn't support fflush(NULL).
We've mostly, though not completely, hewed to that rule ever since.
But such systems are surely gone in the wild, so in the spirit of
cleaning out no-longer-needed portability hacks let's get rid of
multiple per-file fflush() calls in favor of using fflush(NULL).
Also, we were fairly inconsistent about whether to fflush() before
popen() and system() calls. While we've received no bug reports
about that, it seems likely that at least some of these call sites
are at risk of odd behavior, such as error messages appearing in
an unexpected order. Rather than expend a lot of brain cells
figuring out which places are at hazard, let's just establish a
uniform coding rule that we should fflush(NULL) before these calls.
A no-op fflush() is surely of trivial cost compared to launching
a sub-process via a shell; while if it's not a no-op then we likely
need it.
Discussion: https://postgr.es/m/2923412.1661722825@sss.pgh.pa.us
While waiting for slots to become available in wait_on_slots() in
parallel_slot.c, the cancellation always relied on the first connection
in the set to do the job. This could cause problems when this slot's
socket is gone as PQgetCancel() would return NULL in this case. Rather
than always using the first connection, this changes the logic to use
the first valid connection for the cancellation.
Author: Ranier Vilela
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/CAEudQAokk1h_pUwGXsYS4oVOuf35s1O2o3TXGHpV8=AWikvgHA@mail.gmail.com
Backpatch-through: 14
The setting controls tha maximum length of the header line in expanded
format output. Possible settings are full, column, page, or an integer.
the default is full, the current behaviour, and in this case the header
line is the length of the widest line of output. column causes the
header to be truncated to the width of the first column, page causes it
to be truncated to the width of the terminal page, and an integer causes
it to be truncated to that value. If the full value is less than the
page or integer value no truncation occurs. If given without an argument
this option prints its current setting.
Platon Pronko, somewhat modified by me.
Discussion: https://postgr.es/m/f03d38a3-db96-a56e-d1bc-dbbc80bbde4d@gmail.com
psql, pg_dump, and pg_amcheck share code to process object name
patterns like 'foo*.bar*' to match all tables with names starting in
'bar' that are in schemas starting with 'foo'. Before v14, any number
of extra name parts were silently ignored, so a command line '\d
foo.bar.baz.bletch.quux' was interpreted as '\d bletch.quux'. In v14,
as a result of commit 2c8726c4b0, we
instead treated this as a request for table quux in a schema named
'foo.bar.baz.bletch'. That caused problems for people like Justin
Pryzby who were accustomed to copying strings of the form
db.schema.table from messages generated by PostgreSQL itself and using
them as arguments to \d.
Accordingly, revise things so that if an object name pattern contains
more parts than we're expecting, we throw an error, unless there's
exactly one extra part and it matches the current database name.
That way, thisdb.myschema.mytable is accepted as meaning just
myschema.mytable, but otherdb.myschema.mytable is an error, and so
is some.random.garbage.myschema.mytable.
Mark Dilger, per report from Justin Pryzby and discussion among
various people.
Discussion: https://www.postgresql.org/message-id/20211013165426.GD27491%40telsasoft.com
Get rid of the separate "FATAL" log level, as it was applied
so inconsistently as to be meaningless. This mostly involves
s/pg_log_fatal/pg_log_error/g.
Create a macro pg_fatal() to handle the common use-case of
pg_log_error() immediately followed by exit(1). Various
modules had already invented either this or equivalent macros;
standardize on pg_fatal() and apply it where possible.
Invent the ability to add "detail" and "hint" messages to a
frontend message, much as we have long had in the backend.
Except where rewording was needed to convert existing coding
to detail/hint style, I have (mostly) resisted the temptation
to change existing message wording.
Patch by me. Design and patch reviewed at various stages by
Robert Haas, Kyotaro Horiguchi, Peter Eisentraut and
Daniel Gustafsson.
Discussion: https://postgr.es/m/1363732.1636496441@sss.pgh.pa.us
Plain \dconfig is basically equivalent to SHOW except that you can
give it a pattern with wildcards, either to match multiple GUCs or
because you don't exactly remember the name you want.
\dconfig+ adds type, context, and access-privilege information,
mainly because every other kind of object privilege has a psql command
to show it, so GUC privileges should too. (A form of this command was
in some versions of the patch series leading up to commit a0ffa885e.
We pulled it out then because of doubts that the design and code were
up to snuff, but I think subsequent work has resolved that.)
In passing, fix incorrect completion of GUC names in GRANT/REVOKE
ON PARAMETER: a0ffa885e neglected to use the VERBATIM form of
COMPLETE_WITH_QUERY, so it misbehaved for custom (qualified) GUC
names.
Mark Dilger and Tom Lane
Discussion: https://postgr.es/m/3118455.1649267333@sss.pgh.pa.us
When serialization or deadlock errors are reported by backend, allow
to retry and continue the benchmarking. For this purpose new options
"--max-tries", "--failures-detailed" and "--verbose-errors" are added.
Transactions with serialization errors or deadlock errors will be
repeated after rollbacks until they complete successfully or reach the
maximum number of tries (specified by the --max-tries option), or the
maximum time of tries (specified by the --latency-limit option).
These options can be specified at the same time. It is not possible to
use an unlimited number of tries (--max-tries=0) without the
--latency-limit option or the --time option. By default the option
--max-tries is set to 1, which means transactions with
serialization/deadlock errors are not retried. If the last try fails,
this transaction will be reported as failed, and the client variables
will be set as they were before the first run of this transaction.
Statistics on retries and failures are printed in the progress,
transaction / aggregation logs and in the end with other results (all
and for each script). Also retries and failures are printed
per-command with average latency by using option
(--report-per-command, -r).
Option --failures-detailed prints group failures by basic types
(serialization failures / deadlock failures).
Option --verbose-errors prints distinct reports on errors and failures
(errors without retrying) by type with detailed information like which
limit for retries was violated and how far it was exceeded for the
serialization/deadlock failures.
Patch originally written by Marina Polyakova then Yugo Nagata
inherited the discussion and heavily modified the patch to make it
commitable.
Authors: Yugo Nagata, Marina Polyakova
Reviewed-by: Fabien Coelho, Tatsuo Ishii, Alvaro Herrera, Kevin Grittner, Andres Freund, Arthur Zakirov, Alexander Korotkov, Teodor Sigaev, Ildus Kurbangaliev
Discussion: https://postgr.es/m/flat/72a0d590d6ba06f242d75c2e641820ec%40postgrespro.ru
Most of these are cases where we could call memcpy() or other libc
functions with a NULL pointer and a zero count, which is forbidden
by POSIX even though every production version of libc allows it.
We've fixed such things before in a piecemeal way, but apparently
never made an effort to try to get them all. I don't claim that
this patch does so either, but it gets every failure I observe in
check-world, using clang 12.0.1 on current RHEL8.
numeric.c has a different issue that the sanitizer doesn't like:
"ln(-1.0)" will compute log10(0) and then try to assign the
resulting -Inf to an integer variable. We don't actually use the
result in such a case, so there's no live bug.
Back-patch to all supported branches, with the idea that we might
start running a buildfarm member that tests this case. This includes
back-patching c1132aae3 (Check the size in COPY_POINTER_FIELD),
which previously silenced some of these issues in copyfuncs.c.
Discussion: https://postgr.es/m/CALNJ-vT9r0DSsAOw9OXVJFxLENoVS_68kJ5x0p44atoYH+H4dg@mail.gmail.com
After this, the PostgreSQL lexers no longer accept numeric literals
with trailing non-digits, such as 123abc, which would be scanned as
two tokens: 123 and abc. This is undocumented and surprising, and it
might also interfere with some extended numeric literal syntax being
contemplated for the future.
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/b239564c-cad0-b23e-c57e-166d883cb97d@enterprisedb.com
It seems highly unlikely that gettext() can be relied on to be
async-signal-safe. psql used to understand that, but someone got
it wrong long ago in the src/bin/scripts/ version of handle_sigint,
and then the bad idea was perpetuated when those two versions were
unified into src/fe_utils/cancel.c.
I'm unsure why there have not been field complaints about this
... maybe gettext() is signal-safe once it's translated at least
one message? But we have no business assuming any such thing.
In cancel.c (v13 and up), I preserved our ability to localize
"Cancel request sent" messages by invoking gettext() before
the signal handler is set up. In earlier branches I just made
src/bin/scripts/ not localize those messages, as psql did then.
(Just for extra unsafety, the src/bin/scripts/ version was
invoking fprintf() from a signal handler. Sigh.)
Noted while fixing signal-safety issues in PQcancel() itself.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/2937814.1641960929@sss.pgh.pa.us
Throw away most of the existing logic for this, as it was very
inefficient thanks to expensive sub-selects executed to collect
ACL data that we very possibly would have no interest in dumping.
Reduce the ACL handling in the initial per-object-type queries
to be just collection of the catalog ACL fields, as it was
originally. Fetch pg_init_privs data separately in a single
scan of that catalog, and do the merging calculations on the
client side. Remove the separate code path used for pre-9.6
source servers; there is no good reason to treat them differently
from newer servers that happen to have empty pg_init_privs.
Discussion: https://postgr.es/m/2273648.1634764485@sss.pgh.pa.us
Discussion: https://postgr.es/m/7d7eb6128f40401d81b3b7a898b6b4de@W2012-02.nidsa.loc
psql's lexer has historically deleted dash-dash (single-line) comments
from what's collected and sent to the server. This is inconsistent
with what it does for slash-star comments, and people have complained
before that they wish such comments would be captured in the server log.
Undoing the decision completely seems like too big a behavioral change,
however. In particular, comments on lines preceding the start of a
query are generally not thought of as being part of that query.
What we can do to improve the situation is to capture comments that
are clearly *within* a query, that is after the first non-whitespace,
non-comment token but before the query's ending semicolon or backslash
command. This is a nearly trivial code change, and it affects only a
few regression test results.
(It is tempting to try to apply the same rule to slash-star comments.
But it's hard to see how to do that without getting strange history
behavior for comments that cross lines, especially if the user then
starts a new query on the same line as the star-slash. In view of
the lack of complaints, let's leave that case alone.)
Discussion: https://postgr.es/m/CAJcOf-cAdMVr7azeYR7nWKsNp7qhORzc84rV6d7m7knG5Hrtsw@mail.gmail.com
The unicode characters, while in comments and not code, caused MSVC
to emit compiler warning C4819:
The file contains a character that cannot be represented in the
current code page (number). Save the file in Unicode format to
prevent data loss.
Fix by replacing the characters in print.c with descriptive comments
containing the codepoints and symbol names, and remove the character
in brin_bloom.c which was a footnote reference copied from the paper
citation.
Per report from hamerkop in the buildfarm.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/340E4118-0D0C-4E85-8141-8C40EB22DA3A@yesql.se
strtoint(), via strtol(), would skip leading whitespaces but the same
rule was not applied for trailing whitespaces, leading to an
inconsistent behavior. Some tests are changed to cover more this area.
Author: Michael Paquier
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/YP5Pv0d13Ct+03ve@paquier.xyz
Most of the integer options for command-line binaries now make use of a
single routine able to do the job, fixing issues with the detection of
sloppy values caused for example by the use of atoi(), that fails on
strings beginning with numerical characters with junk trailing
characters.
This commit cuts down the number of strings requiring translation by 26
per my count, switching the code to have two error types for invalid and
out-of-range values instead.
Much more could be done here, with float or even int64 options, but
int32 was the most appealing case as it is possible to rely on strtol()
to do the job reliably. Note that there are some exceptions for now,
like pg_ctl or pg_upgrade that use their own logging logic. A couple of
negative TAP tests required some adjustments for the new errors
generated.
pg_dump and pg_restore tracked the maximum number of parallel jobs
within the option parsing. The code is refactored a bit to track that
in the code dedicated to parallelism instead.
Author: Kyotaro Horiguchi, Michael Paquier
Reviewed-by: David Rowley, Álvaro Herrera
Discussion: https://postgr.es/m/CALj2ACXqdG9WhqVoJ9zYf-iZt7sgK7Szv5USs=he6NnWQ2ofTA@mail.gmail.com
An incorrectly-encoded multibyte character near the end of a string
could cause various processing loops to run past the string's
terminating NUL, with results ranging from no detectable issue to
a program crash, depending on what happens to be in the following
memory.
This isn't an issue in the server, because we take care to verify
the encoding of strings before doing any interesting processing
on them. However, that lack of care leaked into client-side code
which shouldn't assume that anyone has validated the encoding of
its input.
Although this is certainly a bug worth fixing, the PG security team
elected not to regard it as a security issue, primarily because
any untrusted text should be sanitized by PQescapeLiteral or
the like before being incorporated into a SQL or psql command.
(If an app fails to do so, the same technique can be used to
cause SQL injection, with probably much more dire consequences
than a mere client-program crash.) Those functions were already
made proof against this class of problem, cf CVE-2006-2313.
To fix, invent PQmblenBounded() which is like PQmblen() except it
won't return more than the number of bytes remaining in the string.
In HEAD we can make this a new libpq function, as PQmblen() is.
It seems imprudent to change libpq's API in stable branches though,
so in the back branches define PQmblenBounded as a macro in the files
that need it. (Note that just changing PQmblen's behavior would not
be a good idea; notably, it would completely break the escaping
functions' defense against this exact problem. So we just want a
version for those callers that don't have any better way of handling
this issue.)
Per private report from houjingyi. Back-patch to all supported branches.
When dealing with overloaded function or operator names, having
to look through a long list of matches is tedious. Let's extend
these commands to allow specification of (input) argument types
to let such results be trimmed down. Each additional argument
is treated the same as the pattern argument of \dT and matched
against the appropriate argument's type name.
While at it, fix \dT (and these new options) to recognize the
usual notation of "foo[]" for "the array type over foo", and
to handle the special abbreviations allowed by the backend
grammar, such as "int" for "integer".
Greg Sabino Mullane, revised rather significantly by me
Discussion: https://postgr.es/m/CAKAnmmLF9Hhu02N+s7uAyLc5J1xZReg72HQUoiKhNiJV3_jACQ@mail.gmail.com
This adds support for writing CREATE FUNCTION and CREATE PROCEDURE
statements for language SQL with a function body that conforms to the
SQL standard and is portable to other implementations.
Instead of the PostgreSQL-specific AS $$ string literal $$ syntax,
this allows writing out the SQL statements making up the body
unquoted, either as a single statement:
CREATE FUNCTION add(a integer, b integer) RETURNS integer
LANGUAGE SQL
RETURN a + b;
or as a block
CREATE PROCEDURE insert_data(a integer, b integer)
LANGUAGE SQL
BEGIN ATOMIC
INSERT INTO tbl VALUES (a);
INSERT INTO tbl VALUES (b);
END;
The function body is parsed at function definition time and stored as
expression nodes in a new pg_proc column prosqlbody. So at run time,
no further parsing is required.
However, this form does not support polymorphic arguments, because
there is no more parse analysis done at call time.
Dependencies between the function and the objects it uses are fully
tracked.
A new RETURN statement is introduced. This can only be used inside
function bodies. Internally, it is treated much like a SELECT
statement.
psql needs some new intelligence to keep track of function body
boundaries so that it doesn't send off statements when it sees
semicolons that are inside a function body.
Tested-by: Jaime Casanova <jcasanov@systemguards.com.ec>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/1c11f1eb-f00c-43b7-799d-2d44132c02d7@2ndquadrant.com
We were never doing clearerr() on the output stream, which results in a
message being printed after each result once an EOF is seen:
could not print result table: Success
This message was added by commit b03436994b (in the pg13 era); before
that, the error indicator would never be examined. So backpatch only
that far back, even though the actual bug (to wit: the fact that the
error indicator is never cleared) is older.
Create a wrapper object, ParallelSlotArray, to encapsulate the
number of slots and the slot array itself, plus some other relevant
bits of information. This reduces the number of parameters we have
to pass around all over the place.
Allow for a ParallelSlotArray to contain slots connected to
different databases within a single cluster. The current clients
of this mechanism don't need this, but it is expected to be used
by future patches.
Defer connecting to databases until we actually need the connection
for something. This is a slight behavior change for vacuumdb and
reindexdb. If you specify a number of jobs that is larger than the
number of objects, the extra connections will now not be used.
But, on the other hand, if you specify a number of jobs that is
so large that it's going to fail, the failure would previously have
happened before any operations were actually started, and now it
won't.
Mark Dilger, reviewed by me.
Discussion: http://postgr.es/m/12ED3DA8-25F0-4B68-937D-D907CFBF08E7@enterprisedb.com
Discussion: http://postgr.es/m/BA592F2D-F928-46FF-9516-2B827F067F57@enterprisedb.com
The parallel slots infrastructure (which implements client-side
multiplexing of server connections doing similar things, not
threading or multiple processes or anything like that) are moved from
src/bin/scripts/scripts_parallel.c to src/fe_utils/parallel_slot.c.
The functions consumeQueryResult() and processQueryResult() which were
previously part of src/bin/scripts/common.c are now moved into that
file as well, becoming static helper functions. This might need to be
changed in the future, but currently they're not used for anything
else.
Some other functions from src/bin/scripts/common.c are moved to to
src/fe_utils and are split up among several files. connectDatabase(),
connectMaintenanceDatabase(), and disconnectDatabase() are moved to
connect_utils.c. executeQuery(), executeCommand(), and
executeMaintenanceCommand() are move to query_utils.c.
handle_help_version_opts() is moved to option_utils.c.
Mark Dilger, reviewed by me. The larger patch series of which this is
a part has also had review from Peter Geoghegan, Andres Freund, Álvaro
Herrera, Michael Paquier, and Amul Sul, but I don't know whether any
of them have reviewed this bit specifically.
Discussion: http://postgr.es/m/12ED3DA8-25F0-4B68-937D-D907CFBF08E7@enterprisedb.com
Discussion: http://postgr.es/m/5F743835-3399-419C-8324-2D424237E999@enterprisedb.com
Discussion: http://postgr.es/m/70655DF3-33CE-4527-9A4D-DDEB582B6BA0@enterprisedb.com
The logic for converting the shell-glob-like syntax supported by
utilities like psql and pg_dump to regular expression is
extracted into a new function patternToSQLRegex. The existing
function processSQLNamePattern now uses this function as a
subroutine.
patternToSQLRegex is a little more general than what is required
by processSQLNamePattern. That function is only interested in
patterns that can have up to 2 parts, a schema and a relation;
but patternToSQLRegex can limit the maximum number of parts to
between 1 and 3, so that patterns can look like either
"database.schema.relation", "schema.relation", or "relation"
depending on how it's invoked and what the user specifies.
processSQLNamePattern only passes two buffers, so works exactly
the same as before, always interpreting the pattern as either
a "schema.relation" pattern or a "relation" pattern. But,
future callers can use this function in other ways.
Mark Dilger, reviewed by me. The larger patch series of which this is
a part has also had review from Peter Geoghegan, Andres Freund, Álvaro
Herrera, Michael Paquier, and Amul Sul, but I don't know whether
any of them have reviewed this bit specifically.
Discussion: http://postgr.es/m/12ED3DA8-25F0-4B68-937D-D907CFBF08E7@enterprisedb.com
Discussion: http://postgr.es/m/5F743835-3399-419C-8324-2D424237E999@enterprisedb.com
Discussion: http://postgr.es/m/70655DF3-33CE-4527-9A4D-DDEB582B6BA0@enterprisedb.com
Michael Paquier
Dean Rasheed
Peter Eisentraut
Tom Lane
Bruce Momjian
Andrew Dunstan
Andres Freund
Robert Haas
Peter Geoghegan
Thomas Munro
John Naylor
Alvaro Herrera
Tatsuo Ishii
Daniel Gustafsson
Magnus Hagander