The reverted changes were intended to force a choice of whether any
newly-added BufferGetPage() calls needed to be accompanied by a
test of the snapshot age, to support the "snapshot too old"
feature. Such an accompanying test is needed in about 7% of the
cases, where the page is being used as part of a scan rather than
positioning for other purposes (such as DML or vacuuming). The
additional effort required for back-patching, and the doubt whether
the intended benefit would really be there, have indicated it is
best just to rely on developers to do the right thing based on
comments and existing usage, as we do with many other conventions.
This change should have little or no effect on generated executable
code.
Motivated by the back-patching pain of Tom Lane and Robert Haas
This patch is a no-op patch which is intended to reduce the chances
of failures of omission once the functional part of the "snapshot
too old" patch goes in. It adds parameters for snapshot, relation,
and an enum to specify whether the snapshot age check needs to be
done for the page at this point. This initial patch passes NULL
for the first two new parameters and BGP_NO_SNAPSHOT_TEST for the
third. The follow-on patch will change the places where the test
needs to be made.
Replay of XLOG_BTREE_VACUUM during Hot Standby was previously thought to require
complex interlocking that matched the requirements on the master. This required
an O(N) operation that became a significant problem with large indexes, causing
replication delays of seconds or in some cases minutes while the
XLOG_BTREE_VACUUM was replayed.
This commit skips the pin scan that was previously required, by observing in
detail when and how it is safe to do so, with full documentation. The pin
scan is skipped only in replay; the VACUUM code path on master is not
touched here and WAL is identical.
The current commit applies in all cases, effectively replacing commit
687f2cd7a0.
Replay of XLOG_BTREE_VACUUM during Hot Standby was previously thought to require
complex interlocking that matched the requirements on the master. This required
an O(N) operation that became a significant problem with large indexes, causing
replication delays of seconds or in some cases minutes while the
XLOG_BTREE_VACUUM was replayed.
This commit skips the “pin scan” that was previously required, by observing in
detail when and how it is safe to do so, with full documentation. The pin scan
is skipped only in replay; the VACUUM code path on master is not touched here.
The current commit still performs the pin scan for toast indexes, though this
can also be avoided if we recheck scans on toast indexes. Later patch will
address this.
No tests included. Manual tests using an additional patch to view WAL records
and their timing have shown the change in WAL records and their handling has
successfully reduced replication delay.
After calling XLogInitBufferForRedo(), the page might be all-zeros if it was
not in page cache already. btree_xlog_unlink_page initialized the page
correctly, but it called PageGetSpecialPointer before initializing it, which
would lead to a corrupt page at WAL replay, if the unlinked page is not in
page cache.
Backpatch to 9.4, the bug came with the rewrite of B-tree page deletion.
Even though the main benefit of the Lehman and Yao algorithm for
btrees is that no locks need be held between page reads in an
index search, we were holding a buffer pin on each leaf page after
it was read until we were ready to read the next one. The reason
was so that we could treat this as a weak lock to create an
"interlock" with vacuum's deletion of heap line pointers, even
though our README file pointed out that this was not necessary for
a scan using an MVCC snapshot.
The main goal of this patch is to reduce the blocking of vacuum
processes by in-progress btree index scans (including a cursor
which is idle), but the code rearrangement also allows for one
less buffer content lock to be taken when a forward scan steps from
one page to the next, which results in a small but consistent
performance improvement in many workloads.
This patch leaves behavior unchanged for some cases, which can be
addressed separately so that each case can be evaluated on its own
merits. These unchanged cases are when a scan uses a non-MVCC
snapshot, an index-only scan, and a scan of a btree index for which
modifications are not WAL-logged. If later patches allow all of
these cases to drop the buffer pin after reading a leaf page, then
the btree vacuum process can be simplified; it will no longer need
the "super-exclusive" lock to delete tuples from a page.
Reviewed by Heikki Linnakangas and Kyotaro Horiguchi
It's a false positive - the variable is only used when 'onleft' is true,
and it is initialized in that case. But the compiler doesn't necessarily
see that.
Each WAL record now carries information about the modified relation and
block(s) in a standardized format. That makes it easier to write tools that
need that information, like pg_rewind, prefetching the blocks to speed up
recovery, etc.
There's a whole new API for building WAL records, replacing the XLogRecData
chains used previously. The new API consists of XLogRegister* functions,
which are called for each buffer and chunk of data that is added to the
record. The new API also gives more control over when a full-page image is
written, by passing flags to the XLogRegisterBuffer function.
This also simplifies the XLogReadBufferForRedo() calls. The function can dig
the relation and block number from the WAL record, so they no longer need to
be passed as arguments.
For the convenience of redo routines, XLogReader now disects each WAL record
after reading it, copying the main data part and the per-block data into
MAXALIGNed buffers. The data chunks are not aligned within the WAL record,
but the redo routines can assume that the pointers returned by XLogRecGet*
functions are. Redo routines are now passed the XLogReaderState, which
contains the record in the already-disected format, instead of the plain
XLogRecord.
The new record format also makes the fixed size XLogRecord header smaller,
by removing the xl_len field. The length of the "main data" portion is now
stored at the end of the WAL record, and there's a separate header after
XLogRecord for it. The alignment padding at the end of XLogRecord is also
removed. This compansates for the fact that the new format would otherwise
be more bulky than the old format.
Reviewed by Andres Freund, Amit Kapila, Michael Paquier, Alvaro Herrera,
Fujii Masao.
xlog.c is huge, this makes it a little bit smaller, which is nice. Functions
related to putting together the WAL record are in xloginsert.c, and the
lower level stuff for managing WAL buffers and such are in xlog.c.
Also move the definition of XLogRecord to a separate header file. This
causes churn in the #includes of all the files that write WAL records, and
redo routines, but it avoids pulling in xlog.h into most places.
Reviewed by Michael Paquier, Alvaro Herrera, Andres Freund and Amit Kapila.
Every redo routine uses the same idiom to determine what to do to a page:
check if there's a backup block for it, and if not read, the buffer if the
block exists, and check its LSN. Refactor that into a common function,
XLogReadBufferForRedo, making all the redo routines shorter and more
readable.
This has no user-visible effect, and makes no changes to the WAL format.
Reviewed by Andres Freund, Alvaro Herrera, Michael Paquier.
I got the backup block numbers off-by-one in the commit that changed the
way incomplete-splits are handled. I blame the comments, which said
"backup block 1" and "backup block 2", even though the backup blocks
are numbered starting from 0, in the macros and functions used in replay.
Fix the comments and the code.
Per Jeff Janes' bug report about corruption caused by torn page writes.
The incorrect code is new in git master, but backpatch the comment change
down to 9.0, where the numbering in the redo-side macros was changed.
When marking a branch as half-dead, a pointer to the top of the branch is
stored in the leaf block's hi-key. During normal operation, the high key
was left in place, and the block number was just stored in the ctid field
of the high key tuple, but in WAL replay, the high key was recreated as a
truncated tuple with zero columns. For the sake of easier debugging, also
truncate the tuple in normal operation, so that the page is identical
after WAL replay. Also, rename the 'downlink' field in the WAL record to
'topparent', as that seems like a more descriptive name. And make sure
it's set to invalid when unlinking the leaf page.
Splitting a page consists of two separate steps: splitting the child page,
and inserting the downlink for the new right page to the parent. Previously,
we handled the case that you crash in between those steps with a cleanup
routine after the WAL recovery had finished, which finished the incomplete
split. However, that doesn't help if the page split is interrupted but the
database doesn't crash, so that you don't perform WAL recovery. That could
happen for example if you run out of disk space.
Remove the end-of-recovery cleanup step. Instead, when a page is split, the
left page is marked with a new INCOMPLETE_SPLIT flag, and when the downlink
is inserted to the parent, the flag is cleared again. If an insertion sees
a page with the flag set, it knows that the split was interrupted for some
reason, and inserts the missing downlink before proceeding.
I used the same approach to fix GIN and GiST split algorithms earlier. This
was the last WAL cleanup routine, so we could get rid of that whole
machinery now, but I'll leave that for a separate patch.
Reviewed by Peter Geoghegan.
In short, we don't allow a page to be deleted if it's the rightmost child
of its parent, but that situation can change after we check for it.
Problem
-------
We check that the page to be deleted is not the rightmost child of its
parent, and then lock its left sibling, the page itself, its right sibling,
and the parent, in that order. However, if the parent page is split after
the check but before acquiring the locks, the target page might become the
rightmost child, if the split happens at the right place. That leads to an
error in vacuum (I reproduced this by setting a breakpoint in debugger):
ERROR: failed to delete rightmost child 41 of block 3 in index "foo_pkey"
We currently re-check that the page is still the rightmost child, and throw
the above error if it's not. We could easily just give up rather than throw
an error, but that approach doesn't scale to half-dead pages. To recap,
although we don't normally allow deleting the rightmost child, if the page
is the *only* child of its parent, we delete the child page and mark the
parent page as half-dead in one atomic operation. But before we do that, we
check that the parent can later be deleted, by checking that it in turn is
not the rightmost child of the grandparent (potentially recursing all the
way up to the root). But the same situation can arise there - the
grandparent can be split while we're not holding the locks. We end up with
a half-dead page that we cannot delete.
To make things worse, the keyspace of the deleted page has already been
transferred to its right sibling. As the README points out, the keyspace at
the grandparent level is "out-of-whack" until the half-dead page is deleted,
and if enough tuples with keys in the transferred keyspace are inserted, the
page might get split and a downlink might be inserted into the grandparent
that is out-of-order. That might not cause any serious problem if it's
transient (as the README ponders), but is surely bad if it stays that way.
Solution
--------
This patch changes the page deletion algorithm to avoid that problem. After
checking that the topmost page in the chain of to-be-deleted pages is not
the rightmost child of its parent, and then deleting the pages from bottom
up, unlink the pages from top to bottom. This way, the intermediate stages
are similar to the intermediate stages in page splitting, and there is no
transient stage where the keyspace is "out-of-whack". The topmost page in
the to-be-deleted chain doesn't have a downlink pointing to it, like a page
split before the downlink has been inserted.
This also allows us to get rid of the cleanup step after WAL recovery, if we
crash during page deletion. The deletion will be continued at next VACUUM,
but the tree is consistent for searches and insertions at every step.
This bug is old, all supported versions are affected, but this patch is too
big to back-patch (and changes the WAL record formats of related records).
We have not heard any reports of the bug from users, so clearly it's not
easy to bump into. Maybe backpatch later, after this has had some field
testing.
Reviewed by Kevin Grittner and Peter Geoghegan.
In ordinary operation, VACUUM must be careful to take a cleanup lock on
each leaf page of a btree index; this ensures that no indexscans could
still be "in flight" to heap tuples due to be deleted. (Because of
possible index-tuple motion due to concurrent page splits, it's not enough
to lock only the pages we're deleting index tuples from.) In Hot Standby,
the WAL replay process must likewise lock every leaf page. There were
several bugs in the code for that:
* The replay scan might come across unused, all-zero pages in the index.
While btree_xlog_vacuum itself did the right thing (ie, nothing) with
such pages, xlogutils.c supposed that such pages must be corrupt and
would throw an error. This accounts for various reports of replication
failures with "PANIC: WAL contains references to invalid pages". To
fix, add a ReadBufferMode value that instructs XLogReadBufferExtended
not to complain when we're doing this.
* btree_xlog_vacuum performed the extra locking if standbyState ==
STANDBY_SNAPSHOT_READY, but that's not the correct test: we won't open up
for hot standby queries until the database has reached consistency, and
we don't want to do the extra locking till then either, for fear of reading
corrupted pages (which bufmgr.c would complain about). Fix by exporting a
new function from xlog.c that will report whether we're actually in hot
standby replay mode.
* To ensure full coverage of the index in the replay scan, btvacuumscan
would emit a dummy WAL record for the last page of the index, if no
vacuuming work had been done on that page. However, if the last page
of the index is all-zero, that would result in corruption of said page,
since the functions called on it weren't prepared to handle that case.
There's no need to lock any such pages, so change the logic to target
the last normal leaf page instead.
The first two of these bugs were diagnosed by Andres Freund, the other one
by me. Fixes based on ideas from Heikki Linnakangas and myself.
This has been wrong since Hot Standby was introduced, so back-patch to 9.0.
Remove use of PageSetTLI() from all page manipulation functions
and adjust README to indicate change in the way we make changes
to pages. Repurpose those bytes into the pd_checksum field and
explain how that works in comments about page header.
Refactoring ahead of actual feature patch which would make use
of the checksum field, arriving later.
Jeff Davis, with comments and doc changes by Simon Riggs
Direction suggested by Robert Haas; many others providing
review comments.
This gets rid of XLByteLT, XLByteLE, XLByteEQ and XLByteAdvance.
These were useful for brevity when XLogRecPtrs were split in
xlogid/xrecoff; but now that they are simple uint64's, they are just
clutter. The only downside to making this change would be ease of
backporting patches, but that has been negated by other substantive
changes to the involved code anyway. The clarity of simpler expressions
makes the change worthwhile.
Most of the changes are mechanical, but in a couple of places, the patch
author chose to invert the operator sense, making the code flow more
logical (and more in line with preceding comments).
Author: Andres Freund
Eyeballed by Dimitri Fontaine and Alvaro Herrera
Most of the replay functions for WAL record types that modify more than
one page failed to ensure that those pages were locked correctly to ensure
that concurrent queries could not see inconsistent page states. This is
a hangover from coding decisions made long before Hot Standby was added,
when it was hardly necessary to acquire buffer locks during WAL replay
at all, let alone hold them for carefully-chosen periods.
The key problem was that RestoreBkpBlocks was written to hold lock on each
page restored from a full-page image for only as long as it took to update
that page. This was guaranteed to break any WAL replay function in which
there was any update-ordering constraint between pages, because even if the
nominal order of the pages is the right one, any mixture of full-page and
non-full-page updates in the same record would result in out-of-order
updates. Moreover, it wouldn't work for situations where there's a
requirement to maintain lock on one page while updating another. Failure
to honor an update ordering constraint in this way is thought to be the
cause of bug #7648 from Daniel Farina: what seems to have happened there
is that a btree page being split was rewritten from a full-page image
before the new right sibling page was written, and because lock on the
original page was not maintained it was possible for hot standby queries to
try to traverse the page's right-link to the not-yet-existing sibling page.
To fix, get rid of RestoreBkpBlocks as such, and instead create a new
function RestoreBackupBlock that restores just one full-page image at a
time. This function can be invoked by WAL replay functions at the points
where they would otherwise perform non-full-page updates; in this way, the
physical order of page updates remains the same no matter which pages are
replaced by full-page images. We can then further adjust the logic in
individual replay functions if it is necessary to hold buffer locks
for overlapping periods. A side benefit is that we can simplify the
handling of concurrency conflict resolution by moving that code into the
record-type-specfic functions; there's no more need to contort the code
layout to keep conflict resolution in front of the RestoreBkpBlocks call.
In connection with that, standardize on zero-based numbering rather than
one-based numbering for referencing the full-page images. In HEAD, I
removed the macros XLR_BKP_BLOCK_1 through XLR_BKP_BLOCK_4. They are
still there in the header files in previous branches, but are no longer
used by the code.
In addition, fix some other bugs identified in the course of making these
changes:
spgRedoAddNode could fail to update the parent downlink at all, if the
parent tuple is in the same page as either the old or new split tuple and
we're not doing a full-page image: it would get fooled by the LSN having
been advanced already. This would result in permanent index corruption,
not just transient failure of concurrent queries.
Also, ginHeapTupleFastInsert's "merge lists" case failed to mark the old
tail page as a candidate for a full-page image; in the worst case this
could result in torn-page corruption.
heap_xlog_freeze() was inconsistent about using a cleanup lock or plain
exclusive lock: it did the former in the normal path but the latter for a
full-page image. A plain exclusive lock seems sufficient, so change to
that.
Also, remove gistRedoPageDeleteRecord(), which has been dead code since
VACUUM FULL was rewritten.
Back-patch to 9.0, where hot standby was introduced. Note however that 9.0
had a significantly different WAL-logging scheme for GIST index updates,
and it doesn't appear possible to make that scheme safe for concurrent hot
standby queries, because it can leave inconsistent states in the index even
between WAL records. Given the lack of complaints from the field, we won't
work too hard on fixing that branch.
The heapam XLog functions are used by other modules, not all of which
are interested in the rest of the heapam API. With this, we let them
get just the XLog stuff in which they are interested and not pollute
them with unrelated includes.
Also, since heapam.h no longer requires xlog.h, many files that do
include heapam.h no longer get xlog.h automatically, including a few
headers. This is useful because heapam.h is getting pulled in by
execnodes.h, which is in turn included by a lot of files.
As noted by Noah Misch, btree_xlog_delete_get_latestRemovedXid is
critically dependent on the assumption that it's examining a consistent
state of the database. This was undocumented though, so the
seemingly-unrelated check for no active HS sessions might be thought to be
merely an optional optimization. Improve comments, and add an explicit
check of reachedConsistency just to be sure.
This function returns InvalidTransactionId (thereby killing all HS
transactions) in several cases that are not nearly unlikely enough for my
taste. This commit doesn't attempt to fix those deficiencies, just
document them.
Back-patch to 9.2, not from any real functional need but just to keep the
branches more closely synced to simplify possible future back-patching.
When we allowed read-only transactions to skip assigning XIDs
we introduced the possibility that a fully deleted btree page
could be reused. This broke the index link sequence which could
then lead to indexscans silently returning fewer rows than would
have been correct. The actual incidence of silent errors from
this is thought to be very low because of the exact workload
required and locking pre-conditions. Fix is to remove pages only
if index page opaque->btpo.xact precedes RecentGlobalXmin.
Noah Misch, reviewed by Simon Riggs
Hot Standby conflicts only with tuples that were visible at
some point. So ignore tuples from aborted transactions or for
tuples updated/deleted during the inserting transaction when
generating the conflict transaction ids.
Following detailed analysis and test case by Noah Misch.
Original report covered btree delete records, correctly observed
by Heikki Linnakangas that this applies to other cases also.
Fix covers all sources of cleanup records via common code.
WAL record for btree delete contains a list of tids, even when backup
blocks are present. We follow the tids to their heap tuples, taking
care to follow LP_REDIRECT tuples. We ignore LP_DEAD tuples on the
understanding that they will always have xmin/xmax earlier than any
LP_NORMAL tuples referred to by killed index tuples. Iff all tuples
are LP_DEAD we return InvalidTransactionId. The heap relfilenode is
added to the WAL record, requiring API changes to pass down the heap
Relation. XLOG_PAGE_MAGIC updated.
field into WAL record and reset it from there, rather than using
FrozenTransactionId which can lead to some corner case bugs.
Problem report and suggested route to a fix from Heikki, details by me.
VACUUM FULL INPLACE), along with a boatload of subsidiary code and complexity.
Per discussion, the use case for this method of vacuuming is no longer large
enough to justify maintaining it; not to mention that we don't wish to invest
the work that would be needed to make it play nicely with Hot Standby.
Aside from the code directly related to old-style VACUUM FULL, this commit
removes support for certain WAL record types that could only be generated
within VACUUM FULL, redirect-pointer removal in heap_page_prune, and
nontransactional generation of cache invalidation sinval messages (the last
being the sticking point for Hot Standby).
We still have to retain all code that copes with finding HEAP_MOVED_OFF and
HEAP_MOVED_IN flag bits on existing tuples. This can't be removed as long
as we want to support in-place update from pre-9.0 databases.
records for heap and btree. Minor change, mostly API changes to
pass through the required values. This is a simple change though
also provides the refactoring required for further enhancements
to conflict processing using the relOid. Changes only have effect
during Hot Standby.