compiled for integer date/time storage and to check the length of
storage for the locale fields in the same data structure.
Slightly reword some of the error messages to be more accurate on
possible recovery options (e.g. recompile *or* re-initdb).
Bump version number on this file.
per recent pghackers discussion: force a new WAL record at first nextval
after a checkpoint, and ensure that xlog is flushed to disk if a nextval
record is the only thing emitted by a transaction.
o Change all current CVS messages of NOTICE to WARNING. We were going
to do this just before 7.3 beta but it has to be done now, as you will
see below.
o Change current INFO messages that should be controlled by
client_min_messages to NOTICE.
o Force remaining INFO messages, like from EXPLAIN, VACUUM VERBOSE, etc.
to always go to the client.
o Remove INFO from the client_min_messages options and add NOTICE.
Seems we do need three non-ERROR elog levels to handle the various
behaviors we need for these messages.
Regression passed.
now just below FATAL in server_min_messages. Added more text to
highlight ordering difference between it and client_min_messages.
---------------------------------------------------------------------------
REALLYFATAL => PANIC
STOP => PANIC
New INFO level the prints to client by default
New LOG level the prints to server log by default
Cause VACUUM information to print only to the client
NOTICE => INFO where purely information messages are sent
DEBUG => LOG for purely server status messages
DEBUG removed, kept as backward compatible
DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1 added
DebugLvl removed in favor of new DEBUG[1-5] symbols
New server_min_messages GUC parameter with values:
DEBUG[5-1], INFO, NOTICE, ERROR, LOG, FATAL, PANIC
New client_min_messages GUC parameter with values:
DEBUG[5-1], LOG, INFO, NOTICE, ERROR, FATAL, PANIC
Server startup now logged with LOG instead of DEBUG
Remove debug_level GUC parameter
elog() numbers now start at 10
Add test to print error message if older elog() values are passed to elog()
Bootstrap mode now has a -d that requires an argument, like postmaster
per my proposal of a couple days ago. This will eliminate the unable-
to-restart-database class of problem that we have seen reported half a
dozen times with 7.1.*.
'volatile' pointers to access those structures, so that optimizing
compilers will not decide to move the structure accesses outside of the
spinlock-acquire-to-spinlock-release sequence. There are no known bugs
in these uses at present, but based on bad experience with lwlock.c,
it seems prudent to ensure that we protect these other uses too.
Per pghackers discussion around 12-Dec. (Note: it should not be
necessary to worry about structures protected by LWLocks, since the
LWLock acquire and release operations are not inline macros.)
do not use the undo pointer anyway. This is a quick-hack solution for
the three-way deadlock condition discussed in pghackers 17-Dec-01.
Need to find a better way of doing it.
so that only one signal number is used not three. Flags in shared
memory tell the reason(s) for the current signal. This method is
extensible to handle more signal reasons without chewing up even more
signal numbers, but the immediate reason is to keep pg_pwd reloads
separate from SIGHUP processing in the postmaster.
Also clean up some problems in the postmaster with delayed response to
checkpoint status changes --- basically, it wouldn't schedule a checkpoint
if it wasn't getting connection requests on a regular basis.
existing lock manager and spinlocks: it understands exclusive vs shared
lock but has few other fancy features. Replace most uses of spinlocks
with lightweight locks. All remaining uses of spinlocks have very short
lock hold times (a few dozen instructions), so tweak spinlock backoff
code to work efficiently given this assumption. All per my proposal on
pghackers 26-Sep-01.
Standardize on %X/%X as the formatting for XLOG position display --- we
had a couple of different formats before, and none of 'em were as useful
as hex offsets IMHO.
buffer manager with 'pg_clog', a specialized access method modeled
on pg_xlog. This simplifies startup (don't need to play games to
open pg_log; among other things, OverrideTransactionSystem goes away),
should improve performance a little, and opens the door to recycling
commit log space by removing no-longer-needed segments of the commit
log. Actual recycling is not there yet, but I felt I should commit
this part separately since it'd still be useful if we chose not to
do transaction ID wraparound.
default, but OIDS are removed from many system catalogs that don't need them.
Some interesting side effects: TOAST pointers are 20 bytes not 32 now;
pg_description has a three-column key instead of one.
Bugs fixed in passing: BINARY cursors work again; pg_class.relhaspkey
has some usefulness; pg_dump dumps comments on indexes, rules, and
triggers in a valid order.
initdb forced.
rather than deleting them only to have to create more. Steady state
is 2*CHECKPOINT_SEGMENTS + WAL_FILES + 1 segment files, which will
simply be renamed rather than constantly deleted and recreated.
To make this safe, added current XLOG file/offset number to page
header of XLOG pages, so that an un-overwritten page from an old
incarnation of a logfile can be reliably told from a valid page.
This change means that if you try to restart postmaster in a CVS-tip
database after installing the change, you'll get a complaint about
bad XLOG page magic number. If you don't want to initdb, run
contrib/pg_resetxlog (and be sure you shut down the old postmaster
cleanly).
checkpoint's redo pointer, not its undo pointer, per discussion in
pghackers a few days ago. No point in hanging onto undo information
until we have the ability to do something with it --- and this solves
a rather large problem with log space for long-running transactions.
Also, change all calls of write() to detect the case where write
returned a count less than requested, but failed to set errno.
Presume that this situation indicates ENOSPC, and give the appropriate
error message, rather than a random message associated with the previous
value of errno.
O_SYNC, or O_DSYNC (as available on a given platform). Add GUC parameter
to control sync method.
Also, add defense to XLogWrite to prevent it from going nuts if passed
a target write position that's past the end of the buffers so far filled
by XLogInsert.
detect case that next page in log came from an older run than the prior
page. This avoids the necessity to re-zero the log after recovery from
a crash, which is good because we need not risk destroying valuable log
information.
This forces another initdb since yesterday :-(. Need to get that log
reset utility done...
* Store two past checkpoint locations, not just one, in pg_control.
On startup, we fall back to the older checkpoint if the newer one
is unreadable. Also, a physical copy of the newest checkpoint record
is kept in pg_control for possible use in disaster recovery (ie,
complete loss of pg_xlog). Also add a version number for pg_control
itself. Remove archdir from pg_control; it ought to be a GUC
parameter, not a special case (not that it's implemented yet anyway).
* Suppress successive checkpoint records when nothing has been entered
in the WAL log since the last one. This is not so much to avoid I/O
as to make it actually useful to keep track of the last two
checkpoints. If the things are right next to each other then there's
not a lot of redundancy gained...
* Change CRC scheme to a true 64-bit CRC, not a pair of 32-bit CRCs
on alternate bytes. Polynomial borrowed from ECMA DLT1 standard.
* Fix XLOG record length handling so that it will work at BLCKSZ = 32k.
* Change XID allocation to work more like OID allocation. (This is of
dubious necessity, but I think it's a good idea anyway.)
* Fix a number of minor bugs, such as off-by-one logic for XLOG file
wraparound at the 4 gig mark.
* Add documentation and clean up some coding infelicities; move file
format declarations out to include files where planned contrib
utilities can get at them.
* Checkpoint will now occur every CHECKPOINT_SEGMENTS log segments or
every CHECKPOINT_TIMEOUT seconds, whichever comes first. It is also
possible to force a checkpoint by sending SIGUSR1 to the postmaster
(undocumented feature...)
* Defend against kill -9 postmaster by storing shmem block's key and ID
in postmaster.pid lockfile, and checking at startup to ensure that no
processes are still connected to old shmem block (if it still exists).
* Switch backends to accept SIGQUIT rather than SIGUSR1 for emergency
stop, for symmetry with postmaster and xlog utilities. Clean up signal
handling in bootstrap.c so that xlog utilities launched by postmaster
will react to signals better.
* Standalone bootstrap now grabs lockfile in target directory, as added
insurance against running it in parallel with live postmaster.
only if at least N other backends currently have open transactions. This
is not a great deal of intelligence about whether a delay might be
profitable ... but it beats no intelligence at all. Note that the default
COMMIT_DELAY is still zero --- this new code does nothing unless that
setting is changed.
Also, mark ENABLEFSYNC as a system-wide setting. It's no longer safe to
allow that to be set per-backend, since we may be relying on some other
backend's fsync to have synced the WAL log.
waste of cycles on single-CPU machines, and of dubious utility on multi-CPU
machines too.
Tweak s_lock_stuck so that caller can specify timeout interval, and
increase interval before declaring stuck spinlock for buffer locks and XLOG
locks.
On systems that have fdatasync(), use that rather than fsync() to sync WAL
log writes. Ensure that WAL file is entirely allocated during XLogFileInit.
are treated more like 'cancel' interrupts: the signal handler sets a
flag that is examined at well-defined spots, rather than trying to cope
with an interrupt that might happen anywhere. See pghackers discussion
of 1/12/01.
are now critical sections, so as to ensure die() won't interrupt us while
we are munging shared-memory data structures. Avoid insecure intermediate
states in some code that proc_exit will call, like palloc/pfree. Rename
START/END_CRIT_CODE to START/END_CRIT_SECTION, since that seems to be
what people tend to call them anyway, and make them be called with () like
a function call, in hopes of not confusing pg_indent.
I doubt that this is sufficient to make SIGTERM safe anywhere; there's
just too much code that could get invoked during proc_exit().
- no more elog(STOP) in StartupXLOG();
- both checkpoint' undo & redo are used to define
oldest on-line log file.
2. Ability to pre-allocate a few log files at checkpoint time
(wal_files option). Off by default.
assume that TAS() will always succeed the first time, even if the lock
is known to be free. Also, make sure that code will eventually time out
and report a stuck spinlock, rather than looping forever. Small cleanups
in s_lock.h, too.
>> xlog.c : special case for beos to avoid 'link' which does not work yet
>> beos/sem.c : implementation of new sem_ctl call (GETPID) and a new
>sem_op
>> flag (IPCNOWAIT)
>> dynloader/beos.c : add a verification of symbol validity (seem that
the
>> loader sometime return OK with an invalid symbol)
>> postmaster.c : add beos forking support for the new checkpoint
process
>> postgres.c : remove beos special case for getrusage
>> beos.h : Correction of a bas definition of AF_UNIX, misc defnitions
>>
>>
>> thanks
>>
>>
>> cyril
Cyril VELTER
to ensure that we have released buffer refcounts and so forth, rather than
putting ad-hoc operations before (some of the calls to) proc_exit. Add
commentary to discourage future hackers from repeating that mistake.
IPC key assignment will now work correctly even when multiple postmasters
are using same logical port number (which is possible given -k switch).
There is only one shared-mem segment per postmaster now, not 3.
Rip out broken code for non-TAS case in bufmgr and xlog, substitute a
complete S_LOCK emulation using semaphores in spin.c. TAS and non-TAS
logic is now exactly the same.
When deadlock is detected, "Deadlock detected" is now the elog(ERROR)
message, rather than a NOTICE that comes out before an unhelpful ERROR.
re-adopt these settings at every postmaster or standalone-backend startup.
This should fix problems with indexes becoming corrupt due to failure to
provide consistent locale environment for postmaster at all times. Also,
refuse to start up a non-locale-enabled compilation in a database originally
initdb'd with a non-C locale. Suppress LIKE index optimization if locale
is not "C" or "POSIX" (are there any other locales where it's safe?).
Issue NOTICE during initdb if selected locale disables LIKE optimization.
Context diff this time.
Remove -m486 compile args for FreeBSD-i386, compile -O2 on i386.
Compile with only -O on alpha for codegen safety.
Make the port use the TEST_AND_SET for alpha and i386 on FreeBSD.
Fix a lot of bogus string formats for outputting pointers (cast to int
and %u/%x replaced with no cast and %p), and 'Size'(size_t) are now
cast to 'unsigned long' and output with %lu/
Remove an unused variable.
Alfred Perlstein
from bufmgr - it would be nice to have separate hash in smgr
for node <--> fd mappings, but for the moment it's easy to
add new hash to relcache.
Fixed small bug in xlog.c:ReadRecord.
it will close VFDs if necessary to surmount ENFILE or EMFILE failures.
Make use of this in md.c, xlog.c, and user.c routines that were
formerly vulnerable to these failures. In particular, this should
handle failures of mdblindwrt() that have been observed under heavy
load conditions. (By golly, every other process on the system may
crash after Postgres eats up all the kernel FDs, but Postgres will
keep going!)
(Subj: [PORTS] initdb problem on NT with 7.0). Since nobody helped me,
I had to find out the reson. The difference between NT and Linux (for
instance) is that "open( path, O_RDWR );" opens a file in text mode. So
sometime less block can be read than required.
I suggest a following patch. BTW the situation appeared before, see
hba.c, pqcomm.c and others.
Alexei Zakharov
eliminating some wildly inconsistent coding in various parts of the
system. I set MAXPGPATH = 1024 in config.h.in. If anyone is really
convinced that there ought to be a configure-time test to set the
value, go right ahead ... but I think it's a waste of time.
when an initdb-forcing change has been applied within a development cycle.
PG_VERSION serves this purpose for official releases, but we can't bump
the PG_VERSION number every time we make a change to the catalogs during
development. Instead, increase the catalog version number to warn other
developers that you've made an incompatible change. See my mail to
pghackers for more info.
