If UPDATE is forced to retry after an EvalPlanQual check, it neglected
to repeat GENERATED-column computations, even though those might well
have changed since we're dealing with a different tuple than before.
Fixing this is mostly a matter of looping back a bit further when
we retry. In v15 and HEAD that's most easily done by altering the API
of ExecUpdateAct so that it includes computing GENERATED expressions.
Also, if an UPDATE in a partitioned table turns into a cross-partition
INSERT operation, we failed to recompute GENERATED columns. That's a
bug since 8bf6ec3ba allowed partitions to have different generation
expressions; although it seems to have no ill effects before that.
Fixing this is messier because we can now have situations where the same
query needs both the UPDATE-aligned set of GENERATED columns and the
INSERT-aligned set, and it's unclear which set will be generated first
(else we could hack things by forcing the INSERT-aligned set to be
generated, which is indeed how fe9e658f4 made it work for MERGE).
The best fix seems to be to build and store separate sets of expressions
for the INSERT and UPDATE cases. That would create ABI issues in the
back branches, but so far it seems we can leave this alone in the back
branches.
Per bug #17823 from Hisahiro Kauchi. The first part of this affects all
branches back to v12 where GENERATED columns were added.
Discussion: https://postgr.es/m/17823-b64909cf7d63de84@postgresql.org
1. Make sure that we don't decrement SxactGlobalXminCount twice when
the SXACT_FLAG_RO_SAFE optimization is reached in a parallel query.
This could trigger a sanity check failure in assert builds. Non-assert
builds recompute the count in SetNewSxactGlobalXmin(), so the problem
was hidden, explaining the lack of field reports. Add a new isolation
test to exercise that case.
2. Remove an assertion that the DOOMED flag can't be set on a partially
released SERIALIZABLEXACT. Instead, ignore the flag (our transaction
was already determined to be read-only safe, and DOOMED is in fact set
during partial release, and there was already an assertion that it
wasn't set sooner). Improve an existing isolation test so that it
reaches that case (previously it wasn't quite testing what it was
supposed to be testing; see discussion).
Back-patch to 12. Bug #17116. Defects in commit 47a338cf.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/17116-d6ca217acc180e30%40postgresql.org
This is usually harmless, but if you were very unlucky it could
provoke a segfault due to the "to" string being right up against
the end of memory. Found via valgrind testing (so we might've
found it earlier, except that our regression tests lacked any
exercise of translate()'s deletion feature).
Fix by switching the order of the test-for-end-of-string and
advance-pointer steps. While here, compute "to_ptr + tolen"
just once. (Smarter compilers might figure that out for
themselves, but let's just make sure.)
Report and fix by Daniil Anisimov, in bug #17816.
Discussion: https://postgr.es/m/17816-70f3d2764e88a108@postgresql.org
It's been this way for a very long time, but it appears to have been
masking an issue that only manifests with different settings. Therefore,
run the tests in the installation's default encoding/locale.
Backpatch to all live branches.
We already tried to fix this in commits 3f7323cbb et al (and follow-on
fixes), but now it emerges that there are still unfixed cases;
moreover, these cases affect all branches not only pre-v14. I thought
we had eliminated all cases of making multiple clones of an UPDATE's
target list when we nuked inheritance_planner. But it turns out we
still do that in some partitioned-UPDATE cases, notably including
INSERT ... ON CONFLICT UPDATE, because ExecInitPartitionInfo thinks
it's okay to clone and modify the parent's targetlist.
This fix is based on a suggestion from Andres Freund: let's stop
abusing the ParamExecData.execPlan mechanism, which was only ever
meant to handle initplans, and instead solve the execution timing
problem by having the expression compiler move MULTIEXPR_SUBLINK steps
to the front of their expression step lists. This is feasible because
(a) all branches still in support compile the entire targetlist of
an UPDATE into a single ExprState, and (b) we know that all
MULTIEXPR_SUBLINKs do need to be evaluated --- none could be buried
inside a CASE, for example. There is a minor semantics change
concerning the order of execution of the MULTIEXPR's subquery versus
other parts of the parent targetlist, but that seems like something
we can get away with. By doing that, we no longer need to worry
about whether different clones of a MULTIEXPR_SUBLINK share output
Params; their usage of that data structure won't overlap.
Per bug #17800 from Alexander Lakhin. Back-patch to all supported
branches. In v13 and earlier, we can revert 3f7323cbb and follow-on
fixes; however, I chose to keep the SubPlan.subLinkId field added
in ccbb54c72. We don't need that anymore in the core code, but it's
cheap enough to fill, and removing a plan node field in a minor
release seems like it'd be asking for trouble.
Andres Freund and Tom Lane
Discussion: https://postgr.es/m/17800-ff90866b3906c964@postgresql.org
If a rule action contains a subquery that refers to columns from OLD
or NEW, then those are really lateral references, and the planner will
complain if it sees such things in a subquery that isn't marked as
lateral. However, at rule-definition time, the user isn't required to
mark the subquery with LATERAL, and so it can fail when the rule is
used.
Fix this by marking such subqueries as lateral in the rewriter, at the
point where they're used.
Dean Rasheed and Tom Lane, per report from Alexander Lakhin.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/5e09da43-aaba-7ea7-0a51-a2eb981b058b%40gmail.com
Multiple cycles of starting up and shutting down the plugin within a
single session would eventually lead to "out of relcache_callback_list
slots", because pgoutput_startup blindly re-registered its cache
callbacks each time. Fix it to register them only once, as all other
users of cache callbacks already take care to do.
This has been broken all along, so back-patch to all supported branches.
Shi Yu
Discussion: https://postgr.es/m/OSZPR01MB631004A78D743D68921FFAD3FDA79@OSZPR01MB6310.jpnprd01.prod.outlook.com
Given an updatable view with a DO ALSO INSERT ... SELECT rule, a
multi-row INSERT ... VALUES query on the view fails if the VALUES list
contains any DEFAULTs that are not replaced by view defaults. This
manifests as an "unrecognized node type" error, or an Assert failure,
in an assert-enabled build.
The reason is that when RewriteQuery() attempts to replace the
remaining DEFAULT items with NULLs in any product queries, using
rewriteValuesRTEToNulls(), it assumes that the VALUES RTE is located
at the same rangetable index in each product query. However, if the
product query is an INSERT ... SELECT, then the VALUES RTE is actually
in the SELECT part of that query (at the same index), rather than the
top-level product query itself.
Fix, by descending to the SELECT in such cases. Note that we can't
simply use getInsertSelectQuery() for this, since that expects to be
given a raw rule action with OLD and NEW placeholder entries, so we
duplicate its logic instead.
While at it, beef up the checks in getInsertSelectQuery() by checking
that the jointree->fromlist node is indeed a RangeTblRef, and that the
RTE it points to has rtekind == RTE_SUBQUERY.
Per bug #17803, from Alexander Lakhin. Back-patch to all supported
branches.
Dean Rasheed, reviewed by Tom Lane.
Discussion: https://postgr.es/m/17803-53c63ed4ecb4eac6%40postgresql.org
Whe decoding a transactional logical message, logicalmsg_decode called
SnapBuildGetOrBuildSnapshot. But we may not have a consistent snapshot
yet at that point. We don't actually need the snapshot in this case
(during replay we'll have the snapshot from the transaction), so in
practice this is harmless. But in assert-enabled build this crashes.
Fixed by requesting the snapshot only in non-transactional case, where
we are guaranteed to have SNAPBUILD_CONSISTENT.
Backpatch to 11. The issue exists since 9.6.
Backpatch-through: 11
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/84d60912-6eab-9b84-5de3-41765a5449e8@enterprisedb.com
If asked to decrease the size of a large (>8K) palloc chunk,
AllocSetRealloc could improperly change the Valgrind state of memory
beyond the new end of the chunk: it would mark data UNDEFINED as far
as the old end of the chunk after having done the realloc(3) call,
thus tromping on the state of memory that no longer belongs to it.
One would normally expect that memory to now be marked NOACCESS,
so that this mislabeling might prevent detection of later errors.
If realloc() had chosen to move the chunk someplace else (unlikely,
but well within its rights) we could also mismark perfectly-valid
DEFINED data as UNDEFINED, causing false-positive valgrind reports
later. Also, any malloc bookkeeping data placed within this area
might now be wrongly marked, causing additional problems.
Fix by replacing relevant uses of "oldsize" with "Min(size, oldsize)".
It's sufficient to mark as far as "size" when that's smaller, because
whatever remains in the new chunk size will be marked NOACCESS below,
and we expect realloc() to have taken care of marking the memory
beyond the new official end of the chunk.
While we're here, also rename the function's "oldsize" variable
to "oldchksize" to more clearly explain what it actually holds,
namely the distance to the end of the chunk (that is, requested size
plus trailing padding). This is more consistent with the use of
"size" and "chksize" to hold the new requested size and chunk size.
Add a new variable "oldsize" in the one stanza where we're actually
talking about the old requested size.
Oversight in commit c477f3e44. Back-patch to all supported branches,
as that was, just in case anybody wants to do valgrind testing on back
branches.
Karina Litskevich
Discussion: https://postgr.es/m/CACiT8iaAET-fmzjjZLjaJC4zwSJmrFyL7LAdHwaYyjjQOQ4hcg@mail.gmail.com
ruleutils.c blindly printed the user-given alias (or nothing if there
hadn't been one) for the target table of INSERT/UPDATE/DELETE queries.
That works a large percentage of the time, but not always: for queries
appearing in WITH, it's possible that we chose a different alias to
avoid conflict with outer-scope names. Since the chosen alias would
be used in any Var references to the target table, this'd lead to an
inconsistent printout with consequences such as dump/restore failures.
The correct logic for printing (or not) a relation alias was embedded
in get_from_clause_item. Factor it out to a separate function so that
we don't need a jointree node to use it. (Only a limited part of that
function can be reached from these new call sites, but this seems like
the cleanest non-duplicative factorization.)
In passing, I got rid of a redundant "\d+ rules_src" step in rules.sql.
Initial report from Jonathan Katz; thanks to Vignesh C for analysis.
This has been broken for a long time, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/e947fa21-24b2-f922-375a-d4f763ef3e4b@postgresql.org
Discussion: https://postgr.es/m/CALDaNm1MMntjmT_NJGp-Z=xbF02qHGAyuSHfYHias3TqQbPF2w@mail.gmail.com
OpenSSL 1.1.1 and newer versions have added support for RSA-PSS
certificates, which requires the use of a specific routine in OpenSSL to
determine which hash function to use when compiling it when using
channel binding in SCRAM-SHA-256. X509_get_signature_nid(), that is the
original routine the channel binding code has relied on, is not able to
determine which hash algorithm to use for such certificates. However,
X509_get_signature_info(), new to OpenSSL 1.1.1, is able to do it. This
commit switches the channel binding logic to rely on
X509_get_signature_info() over X509_get_signature_nid(), which would be
the choice when building with 1.1.1 or newer.
The error could have been triggered on the client or the server, hence
libpq and the backend need to have their related code paths patched.
Note that attempting to load an RSA-PSS certificate with OpenSSL 1.1.0
or older leads to a failure due to an unsupported algorithm.
The discovery of relying on X509_get_signature_info() comes from Jacob,
the tests have been written by Heikki (with few tweaks from me), while I
have bundled the whole together while adding the bits needed for MSVC
and meson.
This issue exists since channel binding exists, so backpatch all the way
down. Some tests are added in 15~, triggered if compiling with OpenSSL
1.1.1 or newer, where the certificate and key files can easily be
generated for RSA-PSS.
Reported-by: Gunnar "Nick" Bluth
Author: Jacob Champion, Heikki Linnakangas
Discussion: https://postgr.es/m/17760-b6c61e752ec07060@postgresql.org
Backpatch-through: 11
When an aggregate function is used as a WindowFunc and a tuple transitions
out of the window frame, we ordinarily try to make use of the aggregate
function's inverse transition function to "unaggregate" the exiting tuple.
This optimization is disabled for various cases, including when the
aggregate contains a volatile function. In such a case we'd be unable to
ensure that the transition value was calculated to the same value during
transitions and inverse transitions. Unfortunately, we did this check by
calling contain_volatile_functions() which does not recursively search
SubPlans for volatile functions. If the aggregate function's arguments or
its FILTER clause contained a subplan with volatile functions then we'd
fail to notice this.
Here we fix this by just disabling the optimization when the WindowFunc
contains any subplans. Volatile functions are not the only reason that a
subplan may have nonrepeatable results.
Bug: #17777
Reported-by: Anban Company
Discussion: https://postgr.es/m/17777-860b739b6efde977%40postgresql.org
Reviewed-by: Tom Lane
Backpatch-through: 11
Try to disable ASLR when building in EXEC_BACKEND mode, to avoid random
memory mapping failures while testing. For developer use only, no
effect on regular builds.
This has been originally applied as of f3e7806 for v15~, but
recently-added buildfarm member gokiburi tests this configuration on
older branches as well, causing it to fail randomly as ASLR would be
enabled.
Suggested-by: Andres Freund <andres@anarazel.de>
Tested-by: Bossart, Nathan <bossartn@amazon.com>
Discussion: https://postgr.es/m/20210806032944.m4tz7j2w47mant26%40alap3.anarazel.de
Backpatch-through: 12
pqsecure_open_gss() includes a code path handling error messages with
v2-style protocol messages coming from the server. The client-side
buffer holding the error message does not force a NULL-termination, with
the data of the server getting copied to the errorMessage of the
connection. Hence, it would be possible for a server to send an
unterminated string and copy arbitrary bytes in the buffer receiving the
error message in the client, opening the door to a crash or even data
exposure.
As at this stage of the authentication process the exchange has not been
completed yet, this could be abused by an attacker without Kerberos
credentials. Clients that have a valid kerberos cache are vulnerable as
libpq opportunistically requests for it except if gssencmode is
disabled.
Author: Jacob Champion
Backpatch-through: 12
Security: CVE-2022-41862
DST law changes in Greenland and Mexico. Notably, a new timezone
America/Ciudad_Juarez has been split off from America/Ojinaga.
Historical corrections for northern Canada, Colombia, and Singapore.
This test has been added as of 857ee8e that has introduced the SQL
function txid_status(), with the purpose of checking that a transaction
ID still in-progress during a crash is correctly marked as aborted after
recovery finishes.
This test is unstable, and some configuration scenarios may that easier
to reproduce (wal_level=minimal, wal_compression=on) because the WAL
holding the information about the in-progress transaction ID may not
have made it to disk yet, hence a post-crash recovery may cause the same
XID to be reused, triggering a test failure.
We have discussed a few approaches, like making this function force a
WAL flush to make it reliable across crashes, but we don't want to pay a
performance penalty in some scenarios, as well. The test could have
been tweaked to enforce a checkpoint but that actually breaks the
promise of the test to rely on a stable result of txid_status() after
a crash.
This issue has been reported a few times across the past years, with an
original report from Kyotaro Horiguchi. The buildfarm machines tanager,
hachi and gokiburi enable wal_compression, and fail on this test
periodically.
Discussion: https://postgr.es/m/3163112.1674762209@sss.pgh.pa.us
Discussion: https://postgr.es/m/20210305.115011.558061052471425531.horikyota.ntt@gmail.com
Backpatch-through: 11
If the final chunk of an oversized tuple being written out to disk was
exactly 32760 bytes, it would be corrupted due to a fencepost bug.
Bug #17619. Back-patch to 11 where the code arrived.
While testing that (see test module in archives), I (tmunro) noticed
that the per-participant page counter was not initialized to zero as it
should have been; that wasn't a live bug when it was written since DSM
memory was originally always zeroed, but since 14
min_dynamic_shared_memory might be configured and it supplies non-zeroed
memory, so that is also fixed here.
Author: Dmitry Astapov <dastapov@gmail.com>
Discussion: https://postgr.es/m/17619-0de62ceda812b8b5%40postgresql.org
When libpqrcv_connect (also known as walrcv_connect()) failed, it leaked the
libpq connection. In most paths that's fairly harmless, as the calling process
will exit soon after. But e.g. CREATE SUBSCRIPTION could lead to a somewhat
longer lived leak.
Fix by releasing resources, including the libpq connection, on error.
Add a test exercising the error code path. To make it reliable and safe, the
test tries to connect to port=-1, which happens to fail during connection
establishment, rather than during connection string parsing.
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20230121011237.q52apbvlarfv6jm6@awork3.anarazel.de
Backpatch: 11-
The motivation for this change is that when pg_dump dumps a
partitioned index that's marked REPLICA IDENTITY, it generates a
command sequence that applies REPLICA IDENTITY before the partitioned
index has been marked valid, causing restore to fail. We could
perhaps change pg_dump to not do it like that, but that would be
difficult and would not fix existing dump files with the problem.
There seems to be very little reason for the backend to disallow
this anyway --- the code ignores indisreplident when the index
isn't valid --- so instead let's fix it by allowing the case.
Commit 9511fb37a previously expressed a concern that allowing
indisreplident to be set on invalid indexes might allow us to
wind up in a situation where a table could have indisreplident
set on multiple indexes. I'm not sure I follow that concern
exactly, but in any case the only way that could happen is because
relation_mark_replica_identity is too trusting about the existing set
of markings being valid. Let's just rip out its early-exit code path
(which sure looks like premature optimization anyway; what are we
doing expending code to make redundant ALTER TABLE ... REPLICA
IDENTITY commands marginally faster and not-redundant ones marginally
slower?) and fix it to positively guarantee that no more than one
index is marked indisreplident.
The pg_dump failure can be demonstrated in all supported branches,
so back-patch all the way. I chose to back-patch 9511fb37a as well,
just to keep indisreplident handling the same in all branches.
Per bug #17756 from Sergey Belyashov.
Discussion: https://postgr.es/m/17756-dd50e8e0c8dd4a40@postgresql.org
When the length was too short, the server read outside the allocation.
That yielded the same log noise as sending the correct length with
(backendPID,cancelAuthCode) matching nothing. Change to a message about
the unexpected length. Given the attacker's lack of control over the
memory layout and the general lack of diversity in memory layouts at the
code in question, we doubt a would-be attacker could cause a segfault.
Hence, while the report arrived via security@postgresql.org, this is not
a vulnerability. Back-patch to v11 (all supported versions).
Andrey Borodin, reviewed by Tom Lane. Reported by Andrey Borodin.
Add "#ifndef FRONTEND" where necessary to make pg_waldump build
on compilers that don't elide unused static-inline functions.
This back-patches relevant parts of commit 3e9ca5260, fixing build
breakage from dc7420c2c and back-patching of f10f0ae42.
Per recently-resurrected buildfarm member castoroides. We aren't
expecting castoroides to build anything newer than v11, but we
might as well clean up the intermediate branches while at it.
When ending recovery based on recovery_target_xid matching with
recovery_target_inclusive = off, we printed an incorrect timestamp
(always 2000-01-01) in the "recovery stopping before ... transaction"
log message. This is a consequence of sloppy refactoring in
c945af80c: the code to fetch recordXtime out of the commit/abort
record used to be executed unconditionally, but it was changed
to get called only in the RECOVERY_TARGET_TIME case. We need only
flip the order of operations to restore the intended behavior.
Per report from Torsten Förtsch. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/CAKkG4_kUevPqbmyOfLajx7opAQk6Cvwkvx0HRcFjSPfRPTXanA@mail.gmail.com
This is wrong since 88e9823, that has switched the WAL sizing
configuration from checkpoint_segments to min_wal_size and
max_wal_size. This missed the recalculation of the internal value of
the internal "CheckPointSegments", that works as a mapping of the old
GUC checkpoint_segments, on reload, for example, and it controls the
timing of checkpoints depending on the volume of WAL generated.
Most users tend to leave checkpoint_completion_target at 0.9 to smooth
the I/O workload, which is why I guess this has gone unnoticed for so
long, still it can be useful to tweak and reload the value dynamically
in some cases to control the timing of checkpoints.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/CALj2ACXgPPAm28mruojSBno+F_=9cTOOxHAywu_dfZPeBdybQw@mail.gmail.com
Backpatch-through: 11
No buildfarm members have reported that yet, but a recently-refreshed
Debian host did.
Reviewed-by: Andrew Dunstan
Discussion: https://postgr.es/m/Y8ey5z4Nav62g4/K@paquier.xyz
Backpatch-through: 11
test_extensions' test_ext_cine extension has the same upgrade hazard
as test_ext7: the regression test leaves it in an updated state
from which no downgrade path to default is provided. This causes
the update_extensions.sql script helpfully provided by pg_upgrade
to fail. So drop it in cross-version-upgrade testing.
Not entirely sure how come I didn't hit this in testing yesterday;
possibly I'd built the upgrade reference databases with
testmodules-install-check disabled.
Backpatch to v10 where this module was introduced.
To test pg_upgrade across major PG versions, we have to be able to
modify or drop any old objects with no-longer-supported properties,
and we have to be able to deal with cosmetic changes in pg_dump output.
Up to now, the buildfarm and pg_upgrade's own test infrastructure had
separate implementations of the former, and we had nothing but very
ad-hoc rules for the latter (including an arbitrary threshold on how
many lines of unchecked diff were okay!). This patch creates a Perl
module that can be shared by both those use-cases, and adds logic
that deals with pg_dump output diffs in a much more tightly defined
fashion.
This largely supersedes previous efforts in commits 0df9641d3,
9814ff550, and 62be9e4cd, which developed a SQL-script-based solution
for the task of dropping old objects. There was nothing fundamentally
wrong with that work in itself, but it had no basis for solving the
output-formatting problem. The most plausible way to deal with
formatting is to build a Perl module that can perform editing on the
dump files; and once we commit to that, it makes more sense for the
same module to also embed the knowledge of what has to be done for
dropping old objects.
Back-patch versions of the helper module as far as 9.2, to
support buildfarm animals that still test that far back.
It's also necessary to back-patch PostgreSQL/Version.pm,
because the new code depends on that. I fixed up pg_upgrade's
002_pg_upgrade.pl in v15, but did not look into back-patching
it further than that.
Tom Lane and Andrew Dunstan
Discussion: https://postgr.es/m/891521.1673657296@sss.pgh.pa.us
The WAIT_USE_EPOLL and WAIT_USE_KQUEUE implementations of
WaitEventSetWaitBlock() confused the size of their internal buffer with
the size of the caller's output buffer, and could ask the kernel for too
many events. In fact the set of events retrieved from the kernel needs
to be able to fit in both buffers, so take the smaller of the two.
The WAIT_USE_POLL and WAIT_USE WIN32 implementations didn't have this
confusion.
This probably didn't come up before because we always used the same
number in both places, but commit 7389aad6 calculates a dynamic size at
construction time, while using MAXLISTEN for its output event buffer on
the stack. That seems like a reasonable thing to want to do, so
consider this to be a pre-existing bug worth fixing.
As discovered by valgrind on skink.
Back-patch to all supported releases for epoll, and to release 13 for
the kqueue part, which copied the incorrect epoll code.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/901504.1673504836%40sss.pgh.pa.us
The current jsonpath code assumes that the referenced variable always exists.
It could only throw an error at the value valuation time. At the same time
existence checking assumes variable is present without valuation, and error
suppression doesn't work for missing variables.
This commit makes existense checking trigger an error for missing variables.
This makes the overall behavior consistent.
Backpatch to 12 where jsonpath was introduced.
Reported-by: David G. Johnston
Discussion: https://postgr.es/m/CAKFQuwbeytffJkVnEqDyLZ%3DrQsznoTh1OgDoOF3VmOMkxcTMjA%40mail.gmail.com
Author: Alexander Korotkov, David G. Johnston
Backpatch-through: 12
pg_database.datfrozenxid gets updated using an in-place update at the
end of vacuum or autovacuum. Since 96cdeae, as pg_database has a toast
relation, it is possible for a pg_database tuple to have toast values
if there is a large set of ACLs in place. In such a case, the in-place
update would fail because of the flattening of the toast values done for
the catcache entry fetched. Instead of using a copy from the catcache,
this changes the logic to fetch the copy of the tuple by directly
scanning pg_database.
Note that before 96cdeae, attempting to insert such a tuple to
pg_database would cause a "row is too big" error, so the end-of-vacuum
problem was not reachable.
This issue has been originally fixed in 947789f on v14~, and there have
been reports about this problem on v12 and v13, causing failures at the
end of VACUUM. This completes the fix on all the stable branches where
pg_database can use a toast table, down to 12.
Author: Ashwin Agrawal, Junfeng Yang
Discussion: https://postgr.es/m/DM5PR0501MB38800D9E4605BCA72DD35557CCE10@DM5PR0501MB3880.namprd05.prod.outlook.com
Discussion: https://postgr.es/m/Y70XNVbUWQsR2Car@paquier.xyz
Backpatch-through: 12
The ALTER DATABASE|FUNCTION|PROCEDURE|ROLE|ROUTINE|USER ... SET <name>
case in psql tab completion failed to exclude <name> = "SCHEMA", which
caused ALTER FUNCTION|PROCEDURE|ROUTINE ... SET SCHEMA to complete
with "FROM CURRENT" and "TO", which won't work.
Fix that, so that those cases now complete with the list of schemas,
like other ALTER ... SET SCHEMA commands.
Noticed while testing the recent patch to improve tab completion for
ALTER FUNCTION/PROCEDURE/ROUTINE, but this is not directly related to
that patch. Rather, this is a long-standing bug, so back-patch to all
supported branches.
Discussion: https://postgr.es/m/CALDaNm0s7GQmkLP_mx5Cvk=UzYMnjhPmXBxU8DsHEunFbC5sTg@mail.gmail.com
While on it, newlines are removed from the end of two elog() strings.
The others are simple grammar mistakes. One comment in pg_upgrade
referred incorrectly to sequences since a7e5457.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20221230231257.GI1153@telsasoft.com
Backpatch-through: 11
New versions of perl trigger warnings within perl.h with our compiler
flags. At least -Wdeclaration-after-statement, -Wshadow=compatible-local are
known to be problematic.
To avoid these warnings, conditionally use #pragma GCC system_header before
including plperl.h.
Alternatively, we could add the include paths for problematic headers with
-isystem, but that is a larger hammer and is harder to search for.
A more granular alternative would be to use #pragma GCC diagnostic
push/ignored/pop, but gcc warns about unknown warnings being ignored, so every
to-be-ignored-temporarily compiler warning would require its own pg_config.h
symbol and #ifdef.
As the warnings are voluminous, it makes sense to backpatch this change. But
don't do so yet, we first want gather buildfarm coverage - it's e.g. possible
that some compiler claiming to be gcc compatible has issues with the pragma.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: Discussion: https://postgr.es/m/20221228182455.hfdwd22zztvkojy2@awork3.anarazel.de
When considering an empty grouping set, we fetched
phasedata->eqfunctions[-1]. Because the eqfunctions array is
palloc'd, that would always be an aset pointer in released versions,
and thus the code accidentally failed to malfunction (since it would
do nothing unless it found a null pointer). Nonetheless this seems
like trouble waiting to happen, so add a check for length == 0.
It's depressing that our valgrind testing did not catch this.
Maybe we should reconsider the choice to not mark that word NOACCESS?
Richard Guo
Discussion: https://postgr.es/m/CAMbWs4-vZuuPOZsKOYnSAaPYGKhmacxhki+vpOKk0O7rymccXQ@mail.gmail.com
The query used to disable WITH OIDS in all the relations making use of
it was checking for materialized views, but this is not a supported
operation. On the contrary, this needs to be done on foreign tables.
While on it, use quote_ident() in the ALTER TABLE strings built on the
relation name.
Author: Anton A. Melnikov, Michael Paquier
Discussion: https://postgr.es/m/49f389ba-95ce-8a9b-09ae-f60650c0e7c7@inbox.ru
Backpatch-through: 12
Three error strings used with cache lookup failures were referring to
incorrect object types for ACL checks:
- Schemas
- Types
- Foreign Servers
There errors should never be triggered, but if they do incorrect
information would be reported.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20221222153041.GN1153@telsasoft.com
Backpatch-through: 11
Andrey Lepikhov demonstrated a case where we spend an unreasonable
amount of time in pull_up_subqueries(). Not only is that recursing
with no explicit check for stack overrun, but the code seems not
interruptable by control-C. Let's stick a CHECK_FOR_INTERRUPTS
there, along with sprinkling some stack depth checks.
An actual fix for the excessive time consumption seems a bit
risky to back-patch; but this isn't, so let's do so.
Discussion: https://postgr.es/m/703c09a2-08f3-d2ec-b33d-dbecd62428b8@postgrespro.ru
Commits f92944137 et al. made IsInTransactionBlock() set the
XACT_FLAGS_NEEDIMMEDIATECOMMIT flag before returning "false",
on the grounds that that kept its API promises equivalent to those of
PreventInTransactionBlock(). This turns out to be a bad idea though,
because it allows an ANALYZE in a pipelined series of commands to
cause an immediate commit, which is unexpected.
Furthermore, if we return "false" then we have another issue,
which is that ANALYZE will decide it's allowed to do internal
commit-and-start-transaction sequences, thus possibly unexpectedly
committing the effects of previous commands in the pipeline.
To fix the latter situation, invent another transaction state flag
XACT_FLAGS_PIPELINING, which explicitly records the fact that we
have executed some extended-protocol command and not yet seen a
commit for it. Then, require that flag to not be set before allowing
InTransactionBlock() to return "false".
Having done that, we can remove its setting of NEEDIMMEDIATECOMMIT
without fear of causing problems. This means that the API guarantees
of IsInTransactionBlock now diverge from PreventInTransactionBlock,
which is mildly annoying, but it seems OK given the very limited usage
of IsInTransactionBlock. (In any case, a caller preferring the old
behavior could always set NEEDIMMEDIATECOMMIT for itself.)
For consistency also require XACT_FLAGS_PIPELINING to not be set
in PreventInTransactionBlock. This too is meant to prevent commands
such as CREATE DATABASE from silently committing previous commands
in a pipeline.
Per report from Peter Eisentraut. As before, back-patch to all
supported branches (which sadly no longer includes v10).
Discussion: https://postgr.es/m/65a899dd-aebc-f667-1d0a-abb89ff3abf8@enterprisedb.com
We might fail to generate a partitionwise join, because
reparameterize_path_by_child() does not support all path types.
This should not be a hard failure condition: we should just fall back
to a non-partitioned join. However, generate_partitionwise_join_paths
did not consider this possibility and would emit the (misleading)
error "could not devise a query plan for the given query" if we'd
failed to make any paths for a child join. Fix it to give up on
partitionwise joining if so. (The accepted technique for giving up
appears to be to set rel->nparts = 0, which I find pretty bizarre,
but there you have it.)
I have not added a test case because there'd be little point:
any omissions of this sort that we identify would soon get fixed
by extending reparameterize_path_by_child(), so the test would stop
proving anything. However, right now there is a known test case based
on failure to cover MaterialPath, and with that I've found that this
is broken in all supported versions. Hence, patch all the way back.
Original report and patch by me; thanks to Richard Guo for
identifying a test case that works against committed versions.
Discussion: https://postgr.es/m/1854233.1669949723@sss.pgh.pa.us
When updating a relation with a rule whose action performed an INSERT
from a multi-row VALUES list, the rewriter might skip processing the
VALUES list, and therefore fail to replace any DEFAULTs in it. This
would lead to an "unrecognized node type" error.
The reason was that RewriteQuery() assumed that a query doing an
INSERT from a multi-row VALUES list would necessarily only have one
item in its fromlist, pointing to the VALUES RTE to read from. That
assumption is correct for the original query, but not for product
queries produced for rule actions. In such cases, there may be
multiple items in the fromlist, possibly including multiple VALUES
RTEs.
What is required instead is for RewriteQuery() to skip any RTEs from
the product query's originating query, which might include one or more
already-processed VALUES RTEs. What's left should then include at most
one VALUES RTE (from the rule action) to be processed.
Patch by me. Thanks to Tom Lane for reviewing.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAEZATCV39OOW7LAR_Xq4i%2BLc1Byux%3DeK3Q%3DHD_pF1o9LBt%3DphA%40mail.gmail.com
When the relkind of a relache entry changes, because a table is converted into
a view, pgstats can get confused in 15+, leading to crashes or assertion
failures.
For HEAD, Tom fixed this in b23cd185fd, by removing support for converting a
table to a view, removing the source of the inconsistency. This commit just
adds an assertion that a relcache entry's relkind does not change, just in
case we end up with another case of that in the future. As there's no cases of
changing relkind anymore, we can't add a test that that's handled correctly.
For 15, fix the problem by not maintaining the association with the old pgstat
entry when the relkind changes during a relcache invalidation processing. In
that case the pgstat entry needs to be unlinked first, to avoid
PgStat_TableStatus->relation getting out of sync. Also add a test reproducing
the issues.
No known problem exists in 11-14, so just add the test there.
Reported-by: vignesh C <vignesh21@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CALDaNm2yXz+zOtv7y5zBd5WKT8O0Ld3YxikuU3dcyCvxF7gypA@mail.gmail.com
Discussion: https://postgr.es/m/CALDaNm3oZA-8Wbps2Jd1g5_Gjrr-x3YWrJPek-mF5Asrrvz2Dg@mail.gmail.com
Backpatch: 15-
Writing "pg_regress --dbname= ..." led to a crash, because
we weren't expecting there to be no database name supplied.
It doesn't seem like a great idea to run regression tests
in whatever is the user's default database; so rather than
supporting this case let's explicitly reject it.
Per report from Xing Guo. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/CACpMh+A8cRvtvtOWVAZsCM1DU81GK4DL26R83y6ugZ1osV=ifA@mail.gmail.com
The frontend-side routine in charge of building a SCRAM verifier
mentioned that the restrictions applying to SASLprep on the password
with the encoding are described at the top of fe-auth-scram.c, but this
information is in auth-scram.c.
This is wrong since 8f8b9be, so backpatch all the way down as this is an
important documentation bit.
Spotted while reviewing a different patch.
Backpatch-through: 11
Previously, we'd compress only when the active range of array entries
reached Max(4 * PROCARRAY_MAXPROCS, 2 * pArray->numKnownAssignedXids).
If max_connections is large, the first term could result in not
compressing for a long time, resulting in much wastage of cycles in
hot-standby backends scanning the array to take snapshots. Get rid
of that term, and just bound it to 2 * pArray->numKnownAssignedXids.
That however creates the opposite risk, that we might spend too much
effort compressing. Hence, consider compressing only once every 128
commit records. (This frequency was chosen by benchmarking. While
we only tried one benchmark scenario, the results seem stable over
a fairly wide range of frequencies.)
Also, force compression when processing RecoveryInfo WAL records
(which should be infrequent); the old code could perform compression
then, but would do so only after the same array-range check as for
the transaction-commit path.
Also, opportunistically run compression if the startup process is about
to wait for WAL, though not oftener than once a second. This should
prevent cases where we waste lots of time by leaving the array
not-compressed for long intervals due to low WAL traffic.
Lastly, add a simple check to keep us from uselessly compressing
when the array storage is already compact.
Back-patch, as the performance problem is worse in pre-v14 branches
than in HEAD.
Simon Riggs and Michail Nikolaev, with help from Tom Lane and
Andres Freund.
Discussion: https://postgr.es/m/CALdSSPgahNUD_=pB_j=1zSnDBaiOtqVfzo8Ejt5J_k7qZiU1Tw@mail.gmail.com
The JOIN_SEMI case Assert'ed that there are no PlaceHolderVars that
need to be evaluated at the semijoin's RHS, which is wrong because
there could be some in the semijoin's qual condition. However, there
could not be any references further up than that, and within the qual
there is not any way that such a PHV could have gone to null yet, so
we don't really need the PHV and there is no need to avoid making the
RHS-removal optimization. The upshot is that there's no actual bug
in production code, and we ought to just remove this misguided Assert.
While we're here, also drop the JOIN_RIGHT case, which is dead code
because reduce_outer_joins() already got rid of JOIN_RIGHT.
Per bug #17700 from Xin Wen. Uselessness of the JOIN_RIGHT case
pointed out by Richard Guo. Back-patch to v12 where this code
was added.
Discussion: https://postgr.es/m/17700-2b5c10d917c30687@postgresql.org
When loading plperl built against Strawberry perl or the msys2 ucrt perl
that have been built with gcc, a binary mismatch has been encountered
which looks like this:
loadable library and perl binaries are mismatched (got handshake key 0000000012800080, needed 0000000012900080)
To cure this we bring the handshake keys into sync by adding
NO_THREAD_SAFE_LOCALE to the defines used to build plperl.
Discussion: https://postgr.es/m/20211005004334.tgjmro4kuachwiuc@alap3.anarazel.de
Discussion: https://postgr.es/m/c2da86a0-2906-744c-923d-16da6047875e@dunslane.net
Backpatch to all live branches.
Strawberry uses __builtin_expect which Visual C doesn't have. For this
case define it as a noop. Solution taken from vim sources.
Backpatch to all live branches
In commit 272248a0c, we introduced an InitialRunningXacts array to
remember transactions and subtransactions that were running when the
xl_running_xacts record that we decoded was written. This array was
allocated in the snapshot builder memory context after we restore
serialized snapshot but we forgot to reset the array while freeing the
builder memory context. So, the next time when we start decoding in the
same session where we don't restore any serialized snapshot, we ended up
using the uninitialized array and that can lead to unpredictable behavior.
This problem doesn't exist in HEAD as instead of using
InitialRunningXacts, we added the list of transaction IDs and
sub-transaction IDs, that have modified catalogs and are running during
snapshot serialization, to the serialized snapshot (see commit 7f13ac8123).
Reported-by: Maxim Orlov
Author: Masahiko Sawada
Reviewed-by: Amit Kapila, Maxim Orlov
Backpatch-through: 11
Discussion: https://postgr.es/m/CACG=ezZoz_KG+Ryh9MrU_g5e0HiVoHocEvqFF=NRrhrwKmEQJQ@mail.gmail.com
We've made multiple attempts at preventing get_actual_variable_range
from taking an unreasonable amount of time (3ca930fc3, fccebe421).
But there's still an issue for the very first planning attempt after
deletion of a large number of extremal-valued tuples. While that
planning attempt will set "killed" bits on the tuples it visits and
thereby reduce effort for next time, there's still a lot of work it
has to do to visit the heap and then set those bits. It's (usually?)
not worth it to do that much work at plan time to have a slightly
better estimate, especially in a context like this where the table
contents are known to be mutating rapidly.
Therefore, let's bound the amount of work to be done by giving up
after we've visited 100 heap pages. Giving up just means we'll
fall back on the extremal value recorded in pg_statistic, so it
shouldn't mean that planner estimates suddenly become worthless.
Note that this means we'll still gradually whittle down the problem
by setting a few more index "killed" bits in each planning attempt;
so eventually we'll reach a good state (barring further deletions),
even in the absence of VACUUM.
Simon Riggs, per a complaint from Jakub Wartak (with cosmetic
adjustments by me). Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAKZiRmznOwi0oaV=4PHOCM4ygcH4MgSvt8=5cu_vNCfc8FSUug@mail.gmail.com
Currently there is a race condition where if concurrent TAP tests both
test that they can open a port they will assume that it is free and use
it, causing one of them to fail. To prevent this we record a reservation
using an exclusive lock, and any TAP test that discovers a reservation
checks to see if the reserving process is still alive, and looks for
another free port if it is.
Ports are reserved in a directory set by the environment setting
PG_TEST_PORT_DIR, or if that doesn't exist a subdirectory of the top
build directory as set by Makefile.global, or its own
tmp_check directory.
The prove_check recipe in Makefile.global.in is extended to export
top_builddir to the TAP tests. This was already exported by the
prove_installcheck recipes.
Per complaint from Andres Freund
Backpatched from 9b4eafcaf4 to all live branches
Discussion: https://postgr.es/m/20221002164931.d57hlutrcz4d2zi7@awork3.anarazel.de
I just spent an annoying amount of time reverse-engineering the
100%-undocumented API between ts_headline and the text search
parser's prsheadline function. Add some commentary about that
while it's fresh in mind. Also remove some unused macros in
wparser_def.c.
While at it, I noticed that when commit 78e73e875 added a
CHECK_FOR_INTERRUPTS call in TS_execute_recurse, it missed
doing so in the parallel function TS_phrase_execute, which
surely needs one just as much.
Back-patch because of the missing CHECK_FOR_INTERRUPTS.
Might as well back-patch the rest of this too.
ProcSleep() used a PGPROC* variable to point to PROC_QUEUE->links.next,
because that does "the right thing" with SHMQueueInsertBefore(). While that
largely works, it's certainly not correct and unnecessary - we can just use
SHM_QUEUE* to point to the insertion point.
Noticed when testing a 32bit of postgres with undefined behavior
sanitizer. UBSan noticed that sometimes the supposed PGPROC wasn't
sufficiently aligned (required since 46d6e5f567, ensured indirectly, via
ShmemAllocRaw() guaranteeing cacheline alignment).
For now fix this by using a SHM_QUEUE* for the insertion point. Subsequently
we should replace all the use of PROC_QUEUE and SHM_QUEUE with ilist.h, but
that's a larger change that we don't want to backpatch.
Backpatch to all supported versions - it's useful to be able to run postgres
under UBSan.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20221117014230.op5kmgypdv2dtqsf@awork3.anarazel.de
Backpatch: 11-
basics.source is supposed to be pretty closely in step with
the examples in chapter 2 of the tutorial, but I forgot to
update it in commit f05a5e000. Fix that, and adjust a couple
of other discrepancies that had crept in over time.
(I notice that advanced.source is nowhere near being in sync
with chapter 3, but I lack the ambition to do something
about that right now.)
This is a back-patch of the v15-era commit f10f0ae42 into older
supported branches. The idea is to design out bugs in which an
ill-timed relcache flush clears rel->rd_smgr partway through
some code sequence that wasn't expecting that. We had another
report today of a corner case that reliably crashes v14 under
debug_discard_caches (nee CLOBBER_CACHE_ALWAYS), and therefore
would crash once in a blue moon in the field. We're unlikely
to get rid of all such code paths unless we adopt the more
rigorous coding rules instituted by f10f0ae42. Therefore,
even though this is a bit invasive, it's time to back-patch.
Some comfort can be taken in the fact that f10f0ae42 has been
in v15 for 16 months without problems.
I left the RelationOpenSmgr macro present in the back branches,
even though no core code should use it anymore, in order to not break
third-party extensions in minor releases. Such extensions might opt
to start using RelationGetSmgr instead, to reduce their code
differential between v15 and earlier branches. This carries a hazard
of failing to compile against headers from existing minor releases.
However, once compiled the extension should work fine even with such
releases, because RelationGetSmgr is a "static inline" function so
it creates no link-time dependency. So depending on distribution
practices, that might be an OK tradeoff.
Per report from Spyridon Dimitrios Agathos. Original patch
by Amul Sul.
Discussion: https://postgr.es/m/CAFM5RaqdgyusQvmWkyPYaWMwoK5gigdtW-7HcgHgOeAw7mqJ_Q@mail.gmail.com
Discussion: https://postgr.es/m/CANiYTQsU7yMFpQYnv=BrcRVqK_3U3mtAzAsJCaqtzsDHfsUbdQ@mail.gmail.com
During XLOG_HASH_SPLIT_ALLOCATE_PAGE replay, we were checking for a
cleanup lock on the new bucket page after acquiring an exclusive lock on
it and raising a PANIC error on failure. However, it is quite possible
that checkpointer can acquire the pin on the same page before acquiring a
lock on it, and then the replay will lead to an error. So instead, directly
acquire the cleanup lock on the new bucket page during
XLOG_HASH_SPLIT_ALLOCATE_PAGE replay operation.
Reported-by: Andres Freund
Author: Robert Haas
Reviewed-By: Amit Kapila, Andres Freund, Vignesh C
Backpatch-through: 11
Discussion: https://postgr.es/m/20220810022617.fvjkjiauaykwrbse@awork3.anarazel.de
The original report was concerned with a possible inconsistency
between the heap and the visibility map, which I was unable to
confirm. The concern has been retracted.
However, there did seem to be a torn page hazard when using
checksums. By not setting the heap page LSN during redo, the
protections of minRecoveryPoint were bypassed. Fixed, along with a
misleading comment.
It may have been impossible to hit this problem in practice, because
it would require a page tear between the checksum and the flags, so I
am marking this as a theoretical risk. But, as discussed, it did
violate expectations about the page LSN, so it may have other
consequences.
Backpatch to all supported versions.
Reported-by: Konstantin Knizhnik
Reviewed-by: Konstantin Knizhnik
Discussion: https://postgr.es/m/fed17dac-8cb8-4f5b-d462-1bb4908c029e@garret.ru
Backpatch-through: 11
The stanza "SET STORAGE may need to add a TOAST table" does not
test what it's supposed to, and hasn't done so since we added
the ability to store constant column default values as metadata.
We need to use a non-constant default to get the expected table
rewrite to actually happen.
Fix that, and add the missing checks that would have exposed the
problem to begin with.
Noted while reviewing a patch that made changes in this test case.
Back-patch to v11 where the problem came in.
In commit 450ee7012 I supposed that all platforms we now care about have
snprintf(), since that's required by C99. Turns out that Microsoft did
not get around to adding that until VS2015. We've dropped support for
VS2013 as of HEAD (cf 6203583b7), but not in the back branches, so add
a hack for this in the back branches only.
There's no easy shortcut to an exact emulation of standard snprintf
in VS2013, but fortunately we don't need one: this code was just fine
with using sprintf before 450ee7012, so we can make it do so again
on that platform (and any others where the problem might crop up).
Per bug #17681 from Daisuke Higuchi. Back-patch to v12, like the
previous patch.
Discussion: https://postgr.es/m/17681-485ba2ec13e7f392@postgresql.org
Add a little to the header comments for these functions to make it
clearer what guarantees about commit behavior are provided to callers.
(See commit f92944137 for context.)
Although this is only a comment change, it's really documentation
aimed at authors of extensions, so it seems appropriate to back-patch.
Yugo Nagata and Tom Lane, per further discussion of bug #17434.
Discussion: https://postgr.es/m/17434-d9f7a064ce2a88a3@postgresql.org
"Triggers on partitioned tables cannot have transition tables." is
incorrect as we allow statement-level triggers on partitioned tables to
have transition tables.
This has been wrong since commit 86f575948; back-patch to v11 where that
commit came in.
Reviewed by Tom Lane.
Discussion: https://postgr.es/m/CAPmGK17gk4vXLzz2iG%2BG4LWRWCoVyam70nZ3OuGm1hMJwDrhcg%40mail.gmail.com
Commit f56f8f8da6 added some code in CloneFkReferencing that's way too
lax about a Constraint node it manufactures, not initializing enough
struct members -- initially_valid in particular was forgotten. This
causes some FKs in partitions added by ALTER TABLE ATTACH PARTITION to
be marked as not validated. Set initially_valid true, which fixes the
bug.
While at it, make the struct initialization more complete. Very similar
code was added in two other places by the same commit; make them all
follow the same pattern for consistency, though no bugs are apparent
there.
This bug has never been reported: I only happened to notice while
working on commit 614a406b4f. The test case that was added there with
the improper result is repaired.
Backpatch to 12.
Discussion: https://postgr.es/m/20221005105523.bhuhkdx4olajboof@alvherre.pgsql
If a syntax error occurred in a SQL-language or PL/pgSQL-language
CREATE FUNCTION or DO command executed in a logical replication worker,
we'd suffer a null pointer dereference or assertion failure. That
seems like a rather contrived case, but nonetheless worth fixing.
The cause is that function_parse_error_transpose assumes it must be
executing within the context of a Portal, but logical/worker.c
doesn't create a Portal since it's not running the standard executor.
We can just back off the hard Assert check and make it fail gracefully
if there's not an ActivePortal. (I have a feeling that the aggressive
check here was my fault originally, probably because I wasn't sure if
the case would always hold and wanted to find out. Well, now we know.)
The hazard seems to exist in all branches that have logical replication,
so back-patch to v10.
Maxim Orlov, Anton Melnikov, Masahiko Sawada, Tom Lane
Discussion: https://postgr.es/m/b570c367-ba38-95f3-f62d-5f59b9808226@inbox.ru
Discussion: https://postgr.es/m/adf0452f-8c6b-7def-d35e-ab516c80088e@inbox.ru
If we have no special-case code in s_lock.h for the current platform,
but the compiler has __sync_lock_test_and_set, use that instead of
failing. It's unlikely that anybody's __sync_lock_test_and_set
would be so awful as to be worse than our semaphore-based fallback,
but if it is, they can (continue to) use --disable-spinlocks.
This allows removal of the RISC-V special case installed by commit
c32fcac56, which generated exactly the same code but only on that
platform. Usefully, the RISC-V buildfarm animals should now test
at least the int variant of this patch.
I've manually tested both variants on ARM by dint of removing the
ARM-specific stanza. We don't want to drop that, because it already
has some special knowledge and is likely to grow more over time.
Likewise, this is not meant to preclude installing special cases
for other arches if that proves worthwhile.
Per discussion of a request to install the same code for loongarch64.
Like the previous patch, we might as well back-patch to supported
branches.
Discussion: https://postgr.es/m/761ac43d44b84d679ba803c2bd947cc0@HSMAILSVR04.hs.handsome.com.cn
DST law changes in Chile, Fiji, Iran, Jordan, Mexico, Palestine,
and Syria. Historical corrections for Chile, Crimea, Iran, and
Mexico.
Also, the Europe/Kiev zone has been renamed to Europe/Kyiv
(retaining the old name as a link).
The following zones have been merged into nearby, more-populous zones
whose clocks have agreed since 1970: Antarctica/Vostok, Asia/Brunei,
Asia/Kuala_Lumpur, Atlantic/Reykjavik, Europe/Amsterdam,
Europe/Copenhagen, Europe/Luxembourg, Europe/Monaco, Europe/Oslo,
Europe/Stockholm, Indian/Christmas, Indian/Cocos, Indian/Kerguelen,
Indian/Mahe, Indian/Reunion, Pacific/Chuuk, Pacific/Funafuti,
Pacific/Majuro, Pacific/Pohnpei, Pacific/Wake and Pacific/Wallis.
(This indirectly affects zones that were already links to one of
these: Arctic/Longyearbyen, Atlantic/Jan_Mayen, Iceland,
Pacific/Ponape, Pacific/Truk, and Pacific/Yap.) America/Nipigon,
America/Rainy_River, America/Thunder_Bay, Europe/Uzhgorod, and
Europe/Zaporozhye were also merged into nearby zones after discovering
that their claimed post-1970 differences from those zones seem to have
been errors.
While the IANA crew have been working on merging zones that have no
post-1970 differences for some time, this batch of changes affects
some zones that are significantly more populous than those merged
in the past, notably parts of Europe. The loss of pre-1970 timezone
history for those zones may be troublesome for applications
expecting consistency of timestamptz display. As an example, the
stored value '1944-06-01 12:00 UTC' would previously display as
'1944-06-01 13:00:00+01' if the Europe/Stockholm zone is selected,
but now it will read out as '1944-06-01 14:00:00+02'.
There exists a "packrat" option that will build the timezone data
files with this old data preserved, but the problem is that it also
resurrects a bunch of other, far less well-attested data; so much so
that actually more zones' contents change from 2022a with that option
than without it. I have chosen not to do that here, for that reason
and because it appears that no major OS distributions are using the
"packrat" option, so that doing so would cause Postgres' behavior
to diverge significantly depending on whether it was built with
--with-system-tzdata. However, for anyone for whom these changes pose
significant problems, there is a solution: build a set of timezone
files with the "packrat" option and use those with Postgres.
Contrary to what is documented in src/backend/access/transam/README,
ginHeapTupleFastInsert() had a few ordering issues with the way it does
its WAL operations when inserting items in its fast path.
First, when using a separate list, XLogBeginInsert() was being always
called before START_CRIT_SECTION(), and in this case a second thing was
wrong when merging lists, as an exclusive lock was taken on the tail
page *before* calling XLogBeginInsert(). Finally, when inserting items
into a tail page, the order of XLogBeginInsert() and
START_CRIT_SECTION() was reversed. This commit addresses all these
issues by moving the calls of XLogBeginInsert() after all the pages
logged are locked and pinned, within a critical section.
This has been applied first only on HEAD as of 56b6625, but as per
discussion with Tom Lane and Álvaro Herrera, a backpatch is preferred to
keep all the branches consistent and to respect the transam's README
where we can.
Author: Matthias van de Meent, Zhang Mingli
Discussion: https://postgr.es/m/CAEze2WhL8uLMqynnnCu1LAPwxD5RKEo0nHV+eXGg_N6ELU88HQ@mail.gmail.com
Backpatch-through: 10
Specifically, when pg_basebackup is invoked with -Tx=y, don't error
out if x could plausibly be an absolute path either on Windows or on
non-Windows systems. We don't know whether the remote system is
running the same OS as the local system, so it's not appropriate to
assume that our local rule about absolute pathnames is the same as
the rule on the remote system.
Patch by me, reviewed by Tom Lane, Andrew Dunstan, and
Davinder Singh.
Discussion: http://postgr.es/m/CA+TgmoY+jC3YiskomvYKDPK3FbrmsDU7_8+wMHt02HOdJeRb0g@mail.gmail.com
This problem has been introduced by commit 272248a0c1 where we started
assigning the subtransactions to the top-level transaction when we mark
both the top-level transaction and its subtransactions as containing
catalog changes. After we assign subtransactions to the top-level
transaction, we were not allowed to execute any invalidations associated
with it when we decide to skip the transaction.
The reason to assign the subtransactions to the top-level transaction was
to avoid the assertion failure in AssertTXNLsnOrder() as they have the
same LSN when we sometimes start accumulating transaction changes for
partial transactions after the restart. Now that with commit 64ff0fe4e8,
we skip this assertion check until we reach the LSN at which we start
decoding the contents of the transaction, so, there is no reason for such
an assignment anymore.
The assignment change was introduced in 15 and prior versions but this bug
doesn't exist in branches prior to 14 since we don't add invalidation
messages to subtransactions. We decided to backpatch through 11 for
consistency but not for 10 since its final release is near.
Reported-by: Kuroda Hayato
Author: Masahiko Sawada
Reviewed-by: Amit Kapila
Backpatch-through: 11
Discussion: https://postgr.es/m/TYAPR01MB58660803BCAA7849C8584AA4F57E9%40TYAPR01MB5866.jpnprd01.prod.outlook.com
Discussion: https://postgr.es/m/a89b46b6-0239-2fd5-71a9-b19b1f7a7145%40enterprisedb.com
When the logical decoding restarts from NEW_CID, since there is no
association between the top transaction and its subtransaction, both are
created as top transactions and have the same LSN. This caused the
assertion failure in AssertTXNLsnOrder().
This patch skips the assertion check until we reach the LSN at which we
start decoding the contents of the transaction, specifically
start_decoding_at LSN in SnapBuild. This is okay because we don't
guarantee to make the association between top transaction and
subtransaction until we try to decode the actual contents of transaction.
The ordering of the records prior to the start_decoding_at LSN should have
been checked before the restart.
The other assertion failure is due to the reason that we forgot to track
that we have considered top-level transaction id in the list of catalog
changing transactions that were committed when one of its subtransactions
is marked as containing catalog change.
Reported-by: Tomas Vondra, Osumi Takamichi
Author: Masahiko Sawada, Kuroda Hayato
Reviewed-by: Amit Kapila, Dilip Kumar, Kuroda Hayato, Kyotaro Horiguchi, Masahiko Sawada
Backpatch-through: 10
Discussion: https://postgr.es/m/a89b46b6-0239-2fd5-71a9-b19b1f7a7145%40enterprisedb.com
Discussion: https://postgr.es/m/TYCPR01MB83733C6CEAE47D0280814D5AED7A9%40TYCPR01MB8373.jpnprd01.prod.outlook.com
DefineQueryRewrite() has long required that ON SELECT rules be named
"_RETURN". But we overlooked the converse case: we should forbid
non-ON-SELECT rules that are named "_RETURN". In particular this
prevents using CREATE OR REPLACE RULE to overwrite a view's _RETURN
rule with some other kind of rule, thereby breaking the view.
Per bug #17646 from Kui Liu. Back-patch to all supported branches.
Discussion: https://postgr.es/m/17646-70c93cfa40365776@postgresql.org
The executor will dump core if it's asked to execute a seqscan on
a relation having no table AM, such as a view. While that shouldn't
really happen, it's possible to get there via catalog corruption,
such as a missing ON SELECT rule. It seems worth installing a defense
against that. There are multiple plausible places for such a defense,
but I picked the planner's get_relation_info().
Per discussion of bug #17646 from Kui Liu. Back-patch to v12 where
the tableam APIs were introduced; in older versions you won't get a
SIGSEGV, so it seems less pressing.
Discussion: https://postgr.es/m/17646-70c93cfa40365776@postgresql.org
In the latest version of Apple's macOS SDK, <sys/socket.h>
fails to compile if "REF" is #define'd as something.
Apple may or may not agree that this is a bug, and even if
they do accept the bug report I filed, they probably won't
fix it very quickly. In the meantime, our back branches will all
fail to compile gram.y. v15 and HEAD currently escape the problem
thanks to the refactoring done in 98e93a1fc, but that's purely
accidental. Moreover, since that patch removed a widely-visible
inclusion of <netdb.h>, back-patching it seems too likely to break
third-party code.
Instead, change the token's code name to REF_P, following our usual
convention for naming parser tokens that are likely to have symbol
conflicts. The effects of that should be localized to the grammar
and immediately surrounding files, so it seems like a safer answer.
Per project policy that we want to keep recently-out-of-support
branches buildable on modern systems, back-patch all the way to 9.2.
Discussion: https://postgr.es/m/1803927.1665938411@sss.pgh.pa.us
snprintf.c has always fallen back on libc's *printf implementation
when printing pointers (%p) and floats. When this code originated,
we were still supporting some platforms that lacked native snprintf,
so we used sprintf for that. That's not actually unsafe in our usage,
but nonetheless builds on macOS are starting to complain about sprintf
being unconditionally deprecated; and I wouldn't be surprised if other
platforms follow suit. There seems little reason to believe that any
platform supporting C99 wouldn't have standards-compliant snprintf,
so let's just use that instead to suppress such warnings.
Back-patch to v12, which is where we started to require C99. It's
also where we started to use our snprintf.c everywhere, so this
wouldn't be enough to suppress the warning in older branches anyway
--- that is, in older branches these aren't necessarily all our
usages of libc's sprintf. It is enough in v12+ because any
deprecation annotation attached to libc's sprintf won't apply to
pg_sprintf. (Whether all our usages of pg_sprintf are adequately
safe is not a matter I intend to address here, but perhaps it could
do with some review.)
Per report from Andres Freund and local testing.
Discussion: https://postgr.es/m/20221015211955.q4cwbsfkyk3c4ty3@awork3.anarazel.de
The postmaster is not supposed to do anything that depends
fundamentally on shared memory contents, because that creates
the risk that a backend crash that trashes shared memory will
take the postmaster down with it, preventing automatic recovery.
In commit 969d7cd43 I lost sight of this principle and coded
AssignPostmasterChildSlot() in such a way that it could fail
or even crash if the shared PMSignalState structure became
corrupted. Remarkably, we've not seen field reports of such
crashes; but I managed to induce one while testing the recent
changes around palloc chunk headers.
To fix, make a semi-duplicative state array inside the postmaster
so that we need consult only local state while choosing a "child
slot" for a new backend. Ensure that other postmaster-executed
routines in pmsignal.c don't have critical dependencies on the
shared state, either. Corruption of PMSignalState might now
lead ReleasePostmasterChildSlot() to conclude that backend X
failed, when actually backend Y was the one that trashed things.
But that doesn't matter, because we'll force a cluster-wide reset
regardless.
Back-patch to all supported branches, since this is an old bug.
Discussion: https://postgr.es/m/3436789.1665187055@sss.pgh.pa.us
DEFAULT markers appearing in an INSERT on an updatable view
could be mis-processed if they were in a multi-row VALUES clause.
This would lead to strange errors such as "cache lookup failed
for type NNNN", or in older branches even to crashes.
The cause is that commit 41531e42d tried to re-use rewriteValuesRTE()
to remove any SetToDefault nodes (that hadn't previously been replaced
by the view's own default values) appearing in "product" queries,
that is DO ALSO queries. That's fundamentally wrong because the
DO ALSO queries might not even be INSERTs; and even if they are,
their targetlists don't necessarily match the view's column list,
so that almost all the logic in rewriteValuesRTE() is inapplicable.
What we want is a narrow focus on replacing any such nodes with NULL
constants. (That is, in this context we are interpreting the defaults
as being strictly those of the view itself; and we already replaced
any that aren't NULL.) We could add still more !force_nulls tests
to further lobotomize rewriteValuesRTE(); but it seems cleaner to
split out this case to a new function, restoring rewriteValuesRTE()
to the charter it had before.
Per bug #17633 from jiye_sw. Patch by me, but thanks to
Richard Guo and Japin Li for initial investigation.
Back-patch to all supported branches, as the previous fix was.
Discussion: https://postgr.es/m/17633-98cc85e1fa91e905@postgresql.org
PostgreSQL::Test::Cluster and ::Utils were not being installed. This is
very hard to notice, as it only seems to affect external modules that
want to run tests from 15 back in earlier versions. Oversight in
b235d41d96.
This applies only to branches 14 and back, because 15 had already been
made correct in commit b3b4d8e68a.
Discussion: https://postgr.es/m/20221010093415.poplkyn7pjeiv2y7@alvherre.pgsql
There are a number of bugs in this area. Two of them are fixed here,
namely:
1. get_relation_idx_constraint_oid does not restrict the type of
constraint that's returned, so with sufficient bad luck it can
return the OID of a foreign key constraint. This has the effect that
a primary key in a partition can end up as a child of a foreign key,
which makes no sense (it needs to be the child of the equivalent
primary key.)
Change the API contract so that only index-backed constraints are
returned, mimicking get_constraint_index().
2. Both CloneFkReferenced and CloneFkReferencing clone a
self-referencing foreign key, so the partition ends up with
a duplicate foreign key. Change the former function to ignore such
constraints.
Add some tests to verify that things are better now. (However, these
new tests show some additional misbehavior that will be fixed later --
namely that there's a constraint marked NOT VALID.)
Backpatch to 12, where these constraints are possible at all.
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Discussion: https://postgr.es/m/20220603154232.1715b14c@karst
Commit 34f581c39 intended to ensure that RelationGetBufferForTuple
would acquire a visibility-map page pin in case the otherBuffer's
all-visible bit had become set since we last had lock on that page.
But I missed a case: when we're extending the relation, VM concerns
were dealt with only in the relatively-less-likely case that we
fail to conditionally lock the otherBuffer. I think I'd believed
that we couldn't need to worry about it if the conditional lock
succeeds, which is true for the target buffer; but the otherBuffer
was unlocked for awhile so its bit might be set anyway. So we need
to do the GetVisibilityMapPins dance, and then also recheck the
page's free space, in both cases.
Per report from Jaime Casanova. Back-patch to v12 as the previous
patch was (although there's still no evidence that the bug is
reachable pre-v14).
Discussion: https://postgr.es/m/E1lWLjP-00006Y-Ml@gemulon.postgresql.org
This prevents marking the argument string for translation for gettext,
and it also prevents the given string (which is already translated) from
being translated at runtime.
Also, mark the strings used as arguments to check_rolespec_name for
translation.
Backpatch all the way back as appropriate. None of this is caught by
any tests (necessarily so), so I verified it manually.
Commit 25936fd46 adjusted things so that the "storeslot" we use
for remapping trigger tuples would have adequate lifespan, but it
neglected to consider the lifespan of the tuple descriptor that
the slot depends on. It turns out that in at least some cases, the
tupdesc we are passing is a refcounted tupdesc, and the refcount for
the slot's reference can get assigned to a resource owner having
different lifespan than the slot does. That leads to an error like
"tupdesc reference 0x7fdef236a1b8 is not owned by resource owner
SubTransaction". Worse, because of a second oversight in the same
commit, we'd try to free the same tupdesc refcount again while
cleaning up after that error, leading to recursive errors and an
"ERRORDATA_STACK_SIZE exceeded" PANIC.
To fix the initial problem, let's just make a non-refcounted copy
of the tupdesc we're supposed to use. That seems likely to guard
against additional problems, since there's no strong reason for
this code to assume that what it's given is a refcounted tupdesc;
in which case there's an independent hazard of the tupdesc having
shorter lifespan than the slot does. (I didn't bother trying to
free said copy, since it should go away anyway when the (sub)
transaction context is cleaned up.)
The other issue can be fixed by making the code added to
AfterTriggerFreeQuery work like the rest of that function, ie be
sure that it doesn't try to free the same slot twice in the event
of recursive error cleanup.
While here, also clean up minor stylistic issues in the test case
added by 25936fd46: don't use "create or replace function", as any
name collision within the tests is likely to have ill effects
that that won't mask; and don't use function names as generic as
trigger_function1, especially if you're not going to drop them
at the end of the test stanza.
Per bug #17607 from Thomas Mc Kay. Back-patch to v12, as the
previous fix was.
Discussion: https://postgr.es/m/17607-bd8ccc81226f7f80@postgresql.org
Mop up assorted set-but-not-used warnings in the back branches.
This includes back-patching relevant fixes from commit 152c9f7b8
the rest of the way, but there are also several cases that did not
appear in HEAD. Some of those we'd fixed in a retail way but not
back-patched, and others I think just got rewritten out of existence
during nearby refactoring.
While here, also back-patch b1980f6d0 (PL/Tcl: Fix compiler warnings
with Tcl 8.6) into 9.2, so that that branch compiles warning-free
with modern Tcl.
Per project policy, this is a candidate for back-patching into
out-of-support branches: it suppresses annoying compiler warnings
but changes no behavior. Hence, back-patch all the way to 9.2.
Discussion: https://postgr.es/m/514615.1663615243@sss.pgh.pa.us
clang 15+ will issue a set-but-not-used warning when the only
use of a variable is in autoincrements (e.g., "foo++;").
That's perfectly sensible, but it detects a few more cases that
we'd not noticed before. Silence the warnings with our usual
methods, such as PG_USED_FOR_ASSERTS_ONLY, or in one case by
actually removing a useless variable.
One thing that we can't nicely get rid of is that with %pure-parser,
Bison emits "yynerrs" as a local variable that falls foul of this
warning. To silence those, I inserted "(void) yynerrs;" in the
top-level productions of affected grammars.
Per recently-established project policy, this is a candidate
for back-patching into out-of-support branches: it suppresses
annoying compiler warnings but changes no behavior. Hence,
back-patch to 9.5, which is as far as these patches go without
issues. (A preliminary check shows that the prior branches
need some other set-but-not-used cleanups too, so I'll leave
them for another day.)
Discussion: https://postgr.es/m/514615.1663615243@sss.pgh.pa.us
The API contract for planstate_tree_walker() callbacks is that they
take a PlanState pointer and a context pointer. Somebody figured
they could save a couple lines of code by ignoring that, and passing
ExecShutdownNode itself as the walker even though it has but one
argument. Somewhat remarkably, we've gotten away with that so far.
However, it seems clear that the upcoming C2x standard means to
forbid such cases, and compilers that actively break such code
likely won't be far behind. So spend the extra few lines of code
to do it honestly with a separate walker function.
In HEAD, we might as well go further and remove ExecShutdownNode's
useless return value. I left that as-is in back branches though,
to forestall complaints about ABI breakage.
Back-patch, with the thought that this might become of practical
importance before our stable branches are all out of service.
It doesn't seem to be fixing any live bug on any currently known
platform, however.
Discussion: https://postgr.es/m/208054.1663534665@sss.pgh.pa.us
Tom Lane
Thomas Munro
Andrew Dunstan
Dean Rasheed
Tomas Vondra
Michael Paquier
David Rowley
Peter Eisentraut
Andres Freund
Noah Misch
Alexander Korotkov
Jeff Davis
Amit Kapila
Alvaro Herrera
Etsuro Fujita
Robert Haas