There are basically three situations in which logical decoding needs
to perform cache invalidation. During/After replaying a transaction
with catalog changes, when skipping a uninteresting transaction that
performed catalog changes and when erroring out while replaying a
transaction. Unfortunately these three cases were all done slightly
differently - partially because 8de3e410fa, which greatly simplifies
matters, got committed in the midst of the development of logical
decoding.
The actually problematic case was when logical decoding skipped
transaction commits (and thus processed invalidations). When used via
the SQL interface cache invalidation could access the catalog - bad,
because we didn't set up enough state to allow that correctly. It'd
not be hard to setup sufficient state, but the simpler solution is to
always perform cache invalidation outside a valid transaction.
Also make the different cache invalidation cases look as similar as
possible, to ease code review.
This fixes the assertion failure reported by Antonin Houska in
53EE02D9.7040702@gmail.com. The presented testcase has been expanded
into a regression test.
Backpatch to 9.4, where logical decoding was introduced.
Heikki noticed in 544E23C0.8090605@vmware.com that slot.c and
snapbuild.c were missing the FIN_CRC32 call when computing/checking
checksums of on disk files. That doesn't lower the the error detection
capabilities of the checksum, but is inconsistent with other usages.
In a followup mail Heikki also noticed that, contrary to a comment,
the 'version' and 'length' struct fields of replication slot's on disk
data where not covered by the checksum. That's not likely to lead to
actually missed corruption as those fields are cross checked with the
expected version and the actual file length. But it's wrong
nonetheless.
As fixing these issues makes existing on disk files unreadable, bump
the expected versions of on disk files for both slots and logical
decoding historic catalog snapshots. This means that loading old
files will fail with
ERROR: "replication slot file ... has unsupported version 1"
and
ERROR: "snapbuild state file ... has unsupported version 1 instead of
2" respectively. Given the low likelihood of anybody already using
these new features in a production setup that seems acceptable.
Fixing these issues made me notice that there's no regression test
covering the loading of historic snapshot from disk - so add one.
Backpatch to 9.4 where these features were introduced.
Currently the extension's pg_prewarm() function didn't check
interrupts once it started "warming" data. Since individual calls can
take a long while it's important for them to be interruptible.
Backpatch to 9.4 where pg_prewarm was introduced.
This fixes a scenario in which pgp_sym_decrypt() failed with "Wrong key
or corrupt data" on messages whose length is 6 less than a power of 2.
Per bug #11905 from Connor Penhale. Fix by Marko Tiikkaja, regression
test case from Jeff Janes.
In general, datatype I/O functions are supposed to be immutable or at
worst stable. Some contrib I/O functions were, through oversight, not
marked with any volatility property at all, which made them VOLATILE.
Since (most of) these functions actually behave immutably, the erroneous
marking isn't terribly harmful; but it can be user-visible in certain
circumstances, as per a recent bug report from Joe Van Dyk in which a
cast to text was disallowed in an expression index definition.
To fix, just adjust the declarations in the extension SQL scripts. If we
were being very fussy about this, we'd bump the extension version numbers,
but that seems like more trouble (for both developers and users) than the
problem is worth.
A fly in the ointment is that chkpass_in actually is volatile, because
of its use of random() to generate a fresh salt when presented with a
not-yet-encrypted password. This is bad because of the general assumption
that I/O functions aren't volatile: the consequence is that records or
arrays containing chkpass elements may have input behavior a bit different
from a bare chkpass column. But there seems no way to fix this without
breaking existing usage patterns for chkpass, and the consequences of the
inconsistency don't seem bad enough to justify that. So for the moment,
just document it in a comment.
Since we're not bumping version numbers, there seems no harm in
back-patching these fixes; at least future installations will get the
functions marked correctly.
pgp_sym_encrypt's option is spelled "sess-key", not "enable-session-key".
Spotted by Jeff Janes.
In passing, improve a comment in pgp-pgsql.c to make it clearer that
the debugging options are intentionally undocumented.
If the locale names are not equal, try to canonicalize both of them by
passing them to setlocale(). Before, we only canonicalized the old cluster's
locale if upgrading from a 8.4-9.2 server, but we also need to canonicalize
when upgrading from a pre-8.4 server. That was an oversight in the code. But
we should also canonicalize on newer server versions, so that we cope if the
canonical form changes from one release to another. I'm about to do just
that to fix bug #11431, by mapping a locale name that contains non-ASCII
characters to a pure-ASCII alias of the same locale.
This is partial backpatch of commit 33755e8edf
in master. Apply to 9.2, 9.3 and 9.4. The canonicalization code didn't exist
before 9.2. In 9.2 and 9.3, this effectively also back-patches the changes
from commit 58274728fb, to be more lax about
the spelling of the encoding in the locale names.
Up to now, PG has assumed that any given timezone abbreviation (such as
"EDT") represents a constant GMT offset in the usage of any particular
region; we had a way to configure what that offset was, but not for it
to be changeable over time. But, as with most things horological, this
view of the world is too simplistic: there are numerous regions that have
at one time or another switched to a different GMT offset but kept using
the same timezone abbreviation. Almost the entire Russian Federation did
that a few years ago, and later this month they're going to do it again.
And there are similar examples all over the world.
To cope with this, invent the notion of a "dynamic timezone abbreviation",
which is one that is referenced to a particular underlying timezone
(as defined in the IANA timezone database) and means whatever it currently
means in that zone. For zones that use or have used daylight-savings time,
the standard and DST abbreviations continue to have the property that you
can specify standard or DST time and get that time offset whether or not
DST was theoretically in effect at the time. However, the abbreviations
mean what they meant at the time in question (or most recently before that
time) rather than being absolutely fixed.
The standard abbreviation-list files have been changed to use this behavior
for abbreviations that have actually varied in meaning since 1970. The
old simple-numeric definitions are kept for abbreviations that have not
changed, since they are a bit faster to resolve.
While this is clearly a new feature, it seems necessary to back-patch it
into all active branches, because otherwise use of Russian zone
abbreviations is going to become even more problematic than it already was.
This change supersedes the changes in commit 513d06ded et al to modify the
fixed meanings of the Russian abbreviations; since we've not shipped that
yet, this will avoid an undesirably incompatible (not to mention incorrect)
change in behavior for timestamps between 2011 and 2014.
This patch makes some cosmetic changes in ecpglib to keep its usage of
datetime lookup tables as similar as possible to the backend code, but
doesn't do anything about the increasingly obsolete set of timezone
abbreviation definitions that are hard-wired into ecpglib. Whatever we
do about that will likely not be appropriate material for back-patching.
Also, a potential free() of a garbage pointer after an out-of-memory
failure in ecpglib has been fixed.
This patch also fixes pre-existing bugs in DetermineTimeZoneOffset() that
caused it to produce unexpected results near a timezone transition, if
both the "before" and "after" states are marked as standard time. We'd
only ever thought about or tested transitions between standard and DST
time, but that's not what's happening when a zone simply redefines their
base GMT offset.
In passing, update the SGML documentation to refer to the Olson/zoneinfo/
zic timezone database as the "IANA" database, since it's now being
maintained under the auspices of IANA.
We've gotten enough push-back on that change to make it clear that it
wasn't an especially good idea to do it like that. Revert plain EXPLAIN
to its previous behavior, but keep the extra output in EXPLAIN ANALYZE.
Per discussion.
Internally, I set this up as a separate flag ExplainState.summary that
controls printing of planning time and execution time. For now it's
just copied from the ANALYZE option, but we could consider exposing it
to users.
This has been broken since commit af7914c662,
which added the EXPLAIN (TIMING) option. Although that commit included
updates to auto_explain, they evidently weren't tested very carefully,
because the code failed to print node timings even when it should, due to
failure to set es.timing in the ExplainState struct. Reported off-list by
Neelakanth Nadgir of Salesforce.
In passing, clean up the documentation for auto_explain's options a
little bit, including re-ordering them into what seems to me a more
logical order.
The previous coding first generated a uniform random value between 0.0 and
1.0, then converted that to an integer between 1 and 10000, and divided that
again by 10000. Those conversions are unnecessary; we can use the double
value that pg_erand48() returns directly. While we're at it, put the logic
into a helper function, getPoissonRand().
The largest delay generated by the old coding was about 9.2 times the
average, because of the way the uniformly distributed value used for the
calculation was truncated to 1/10000 granularity. The new coding doesn't
have such clamping. With my laptop's DBL_MIN value, the maximum delay with
the new coding is about 700x the average. That seems acceptable - any
reasonable pgbench session should last long enough to average that out.
Backpatch to 9.4.
The reported latency values now include the "schedule lag" time, that is,
the time between the transaction's scheduled start time and the time it
actually started. This relates better to a model where requests arrive at a
certain rate, and we are interested in the response time to the end user or
application, rather than the response time of the database itself.
Also, when --rate is used, include the schedule lag time in the log output.
The --rate option is new in 9.4, so backpatch to 9.4. It seems better to
make this change in 9.4, while we're still in the beta period, than ship a
9.4 version that calculates the values differently than 9.5.
The regression tests for contrib/test_decoding regularly failed on
postgres instances that were very slow. Either because the hardware
itself was slow or because very expensive debugging options like
CLOBBER_CACHE_ALWAYS were used.
The reason they failed was just that some additional transactions were
decoded. Analyze and vacuum, triggered by autovac.
To fix just add a option to test_decoding to only display transactions
in which a change was actually displayed. That's not pretty because it
removes information from the tests; but better than constantly failing
tests in very likely harmless ways.
Backpatch to 9.4 where logical decoding was introduced.
Discussion: 20140629142511.GA26930@awork2.anarazel.de
In commit 45e02e3232, we intentionally
disallowed updates on individual elements of oidvector columns. While that
still seems like a sane idea in the abstract, we (I) forgot that citext's
"upgrade from unpackaged" script did in fact perform exactly such updates,
in order to fix the problem that citext indexes should have a collation
but would not in databases dumped or upgraded from pre-9.1 installations.
Even if we wanted to add casts to allow such updates, there's no practical
way to do so in the back branches, so the only real alternative is to make
citext's kluge even klugier. In this patch, I cast the oidvector to text,
fix its contents with regexp_replace, and cast back to oidvector. (Ugh!)
Since the aforementioned commit went into all active branches, we have to
fix this in all branches that contain the now-broken update script.
Per report from Eric Malm.
Some of the many error messages introduced in 458857cc missed 'FROM
unpackaged'. Also e016b724 and 45ffeb7e forgot to quote extension
version numbers.
Backpatch to 9.1, just like 458857cc which introduced the messages. Do
so because the error messages thrown when the wrong command is copy &
pasted aren't easy to understand.
We also don't track PREPARE, nor do we track planning time in general, so
let's ignore DEALLOCATE as well for consistency.
Backpatch to 9.4, but not further than that. Although it seems unlikely that
anyone is relying on the current behavior, this is a behavioral change.
Fabien Coelho
Previously, TOAST tables only required in the new cluster could cause
oid conflicts if they were auto-numbered and a later conflicting oid had
to be assigned.
Backpatch through 9.3
autovacuum_multixact_freeze_max_age was added as a pg_ctl start
parameter in 9.3.X to prevent autovacuum from running. However, only
some 9.3.X releases have autovacuum_multixact_freeze_max_age as it was
added in a minor PG 9.3 release. It also isn't needed because -b turns
off autovacuum in 9.1+.
Without this fix, trying to upgrade from an early 9.3 release to 9.4
would fail.
Report by EDB
Backpatch through 9.3
get_raw_page tried to validate the supplied block number against
RelationGetNumberOfBlocks(), which of course is only right when
accessing the main fork. In most cases, the main fork is longer
than the others, so that the check was too weak (allowing a
lower-level error to be reported, but no real harm to be done).
However, very small tables could have an FSM larger than their heap,
in which case the mistake prevented access to some FSM pages.
Per report from Torsten Foertsch.
In passing, make the bad-block-number error into an ereport not elog
(since it's certainly not an internal error); and fix sloppily
maintained comment for RelationGetNumberOfBlocksInFork.
This has been wrong since we invented relation forks, so back-patch
to all supported branches.
With OpenLDAP versions 2.4.24 through 2.4.31, inclusive, PostgreSQL
backends can crash at exit. Raise a warning during "configure" based on
the compile-time OpenLDAP version number, and test the crash scenario in
the dblink test suite. Back-patch to 9.0 (all supported versions).
Commit 1b86c81d2d fixed the decoding of toasted columns for the rows
contained in one xl_heap_multi_insert record. But that's not actually
enough, because heap_multi_insert() will actually first toast all
passed in rows and then emit several *_multi_insert records; one for
each page it fills with tuples.
Add a XLOG_HEAP_LAST_MULTI_INSERT flag which is set in
xl_heap_multi_insert->flag denoting that this multi_insert record is
the last emitted by one heap_multi_insert() call. Then use that flag
in decode.c to only set clear_toast_afterwards in the right situation.
Expand the number of rows inserted via COPY in the corresponding
regression test to make sure that more than one heap page is filled
with tuples by one heap_multi_insert() call.
Backpatch to 9.4 like the previous commit.
Previously, when calculations on the need for toast tables changed,
pg_upgrade could not handle cases where the new cluster needed a TOAST
table and the old cluster did not. (It already handled the opposite
case.) This fixes the "OID mismatch" error typically generated in this
case.
Backpatch through 9.2
When decoding the results of a HEAP2_MULTI_INSERT (currently only
generated by COPY FROM) toast columns for all but the last tuple
weren't replaced by their actual contents before being handed to the
output plugin. The reassembled toast datums where disregarded after
every REORDER_BUFFER_CHANGE_(INSERT|UPDATE|DELETE) which is correct
for plain inserts, updates, deletes, but not multi inserts - there we
generate several REORDER_BUFFER_CHANGE_INSERTs for a single
xl_heap_multi_insert record.
To solve the problem add a clear_toast_afterwards boolean to
ReorderBufferChange's union member that's used by modifications. All
row changes but multi_inserts always set that to true, but
multi_insert sets it only for the last change generated.
Add a regression test covering decoding of multi_inserts - there was
none at all before.
Backpatch to 9.4 where logical decoding was introduced.
Bug found by Petr Jelinek.
The isxdigit() calls relied on undefined behavior. The isascii() call
was well-defined, but our prevailing style is to include the cast.
Back-patch to 9.4, where the isxdigit() calls were introduced.
The output buffer size in unaccent_lexize() was calculated as input string
length times pg_database_encoding_max_length(), which effectively assumes
that replacement strings aren't more than one character. While that was
all that we previously documented it to support, the code actually has
always allowed replacement strings of arbitrary length; so if you tried
to make use of longer strings, you were at risk of buffer overrun. To fix,
use an expansible StringInfo buffer instead of trying to determine the
maximum space needed a-priori.
This would be a security issue if unaccent rules files could be installed
by unprivileged users; but fortunately they can't, so in the back branches
the problem can be labeled as improper configuration by a superuser.
Nonetheless, a memory stomp isn't a nice way of reacting to improper
configuration, so let's back-patch the fix.
There were some C comments that hadn't been updated from the switch of
using only pg_dumpall to using pg_dump and pg_dumpall, so update them.
Also, don't bother using --schema-only for pg_dumpall --globals-only.
Backpatch through 9.4
This function continued to use it after heap_endscan() freed it. In
passing, don't explicit create a strategy here. Instead, use the one
created by heap_beginscan_strat(), if any. Back-patch to 9.2, where use
of a BufferAccessStrategy here was introduced.
This fixes a bug that caused vacuum to fail when the '0000' files left
by initdb were accessed as part of vacuum's cleanup of old pg_multixact
files.
Backpatch through 9.3
dblink uses a short-lived data conversion memory context. However it
was not deleted when no longer needed, leading to a noticeable memory
leak under some circumstances. Plug the hole, along with minor
refactoring. Backpatch to 9.2 where the leak was introduced.
Report and initial patch by MauMau. Reviewed/modified slightly by
Tom Lane and me.
Any OS user able to access the socket can connect as the bootstrap
superuser and proceed to execute arbitrary code as the OS user running
the test. Protect against that by placing the socket in a temporary,
mode-0700 subdirectory of /tmp. The pg_regress-based test suites and
the pg_upgrade test suite were vulnerable; the $(prove_check)-based test
suites were already secure. Back-patch to 8.4 (all supported versions).
The hazard remains wherever the temporary cluster accepts TCP
connections, notably on Windows.
As a convenient side effect, this lets testing proceed smoothly in
builds that override DEFAULT_PGSOCKET_DIR. Popular non-default values
like /var/run/postgresql are often unwritable to the build user.
Security: CVE-2014-0067
187492b6c2 changed pgstat.c so that
the stats files were saved into $PGDATA/pg_stat directory when the server
was shutdowned. But it accidentally forgot to change the location of
pg_stat_statements permanent stats file. This commit fixes pg_stat_statements
so that its stats file is also saved into $PGDATA/pg_stat at shutdown.
Since this fix changes the file layout, we don't back-patch it to 9.3
where this oversight was introduced.
The original coding in contrib/uuid-ossp created and destroyed a uuid_t
object (or, in some cases, even two of them) each time it was called.
This is not the intended usage: you're supposed to keep the uuid_t object
around so that the library can cache its state across uses. (Other UUID
libraries seem to keep equivalent state behind-the-scenes in static
variables, but OSSP chose differently.) Aside from being quite inefficient,
creating a new uuid_t loses knowledge of the previously generated UUID,
which in theory could result in duplicate V1-style UUIDs being created
on sufficiently fast machines.
On at least some platforms, creating a new uuid_t also draws some entropy
from /dev/urandom, leaving less for the rest of the system. This seems
sufficiently unpleasant to justify back-patching this change.
The previous version of these tests expected uuid_generate_v1() to always
emit MAC addresses with the local-admin and multicast address bits zero.
However, several of the buildfarm critters are reporting values with the
local-admin bit set. (Perhaps they're running inside VMs or jails.)
And a couple are reporting values with the multicast bit set, probably
meaning that the UUID library couldn't read the system MAC address.
Also, it emerges that if OSSP UUID can't read the system MAC address, it
falls back to V1MC behavior wherein the whole node field gets randomized
each time, breaking the test that expected the node field to remain stable
in V1 output. (It looks like e2fs doesn't behave that way, though.)
It's not entirely clear why we can't get a system MAC address, since the
buildfarm scripts would not work without internet access. Nonetheless,
the regression tests had better cope with the case, so adjust the tests
to expect these behaviors.
This reverts commit 45b7abe59e.
It turns out that the %name-prefix syntax without "=" does not work
at all in pre-2.4 Bison. We are not prepared to make such a large
jump in minimum required Bison version just to suppress a warning
message in a version hardly any developers are using yet.
When 3.0 gets more popular, we'll figure out a way to deal with this.
In the meantime, BISONFLAGS=-Wno-deprecated is recommendable for
anyone using 3.0 who doesn't want to see the warning.
%name-prefix doesn't use an "=" sign according to the Bison docs, but it
silently accepted one anyway, until Bison 3.0. This was originally a
typo of mine in commit 012abebab1, and we
seem to have slavishly copied the error into all the other grammar files.
Per report from Vik Fearing; analysis by Peter Eisentraut.
Back-patch to all active branches, since somebody might try to build
a back branch with up-to-date tools.
On reflection, the timestamp-advances test might fail if we're unlucky
enough for the time_mid field to change between two calls, since uuid_cmp
is just bytewise comparison and the field ordering has more significant
fields later. Build some field extraction functions so we can do a more
honest test of that. Also check that the version and reserved fields
contain what they should.
The V5 (SHA1 hashing) code wrote 20 bytes into a 16-byte local variable.
This had accidentally failed to fail in my testing and Matteo's, but
buildfarm results exposed the problem.
Allow the contrib/uuid-ossp extension to be built atop any one of these
three popular UUID libraries. (The extension's name is now arguably a
misnomer, but we'll keep it the same so as not to cause unnecessary
compatibility issues for users.)
We would not normally consider a change like this post-beta1, but the issue
has been forced by our upgrade to autoconf 2.69, whose more rigorous header
checks are causing OSSP's header files to be rejected on some platforms.
It's been foreseen for some time that we'd have to move away from depending
on OSSP UUID due to lack of upstream maintenance, so this is a down payment
on that problem.
While at it, add some simple regression tests, in hopes of catching any
major incompatibilities between the three implementations.
Matteo Beccati, with some further hacking by me
Commit 090d0f2050 added new code showing
how it can be useful to set bgw_notify_pid to a non-zero value, but it
failed to make sure that the existing call to RegisterBackgroundWorker
initialized the new field at all.
Report and patch by Shigeru Hanada.
On Mingw, it seems that scanf() doesn't necessarily accept the same format
codes that printf() does, and in particular it may fail to recognize %llu
even though printf() does. Since configure only probes printf() behavior
while setting up the INT64_FORMAT macros, this means it's unsafe to use
those macros with scanf(). We had only one instance of such a coding
pattern, in contrib/pg_stat_statements, so change that code to avoid
the problem.
Per buildfarm warnings. Back-patch to 9.0 where the troublesome code
was introduced.
Michael Paquier
