any hardcoding of those options. Along the way, reorder the expression used to
calculate RELSEG_SIZE to make it slightly clearer. For now wal_segsize is only
allowed to have a value of 1 on Windows - we can relax that when we get full
large file support in the backend.
let XLOG_BLCKSZ and XLOG_SEG_SIZE be set via configure. Per a proposal by
Mark Wong, though I thought it better to call the switches after "wal" rather
than "xlog".
This has been the only documented and encouraged syntax for a long time, and
with extension facilities such as aliases being proposed, it is a good time to
clean up the legacy syntax a bit.
Author: Bernd Helmle <mailings@oopsware.de>
support for a nonsegmented mode from md.c. Per recent discussions, there
doesn't seem to be much value in a "never segment" option as opposed to
segmenting with a suitably large segment size. So instead provide a
configure-time switch to set the desired segment size in units of gigabytes.
While at it, expose a configure switch for BLCKSZ as well.
Zdenek Kotala
it vary with BLCKSZ as before. This agrees with what the documentation says,
and avoids a regression test problem when BLCKSZ is larger than default.
Per recent discussion.
a user-supplied TID is out of range for the relation. This is needed to
preserve compatibility with our pre-8.3 behavior, and it is sensible anyway
since if the query were implemented by brute force rather than optimized
into a TidScan, the behavior for a non-existent TID would be zero rows out,
never an error. Per gripe from Gurjeet Singh.
do CancelBackup at a sane place, fix some oversights in the state transitions,
allow only superusers to connect while we are waiting for backup mode to end.
flags by separate AT_SetNotNull subcommands. That was always ugly and
inefficient, and it's now clear that it was merely a partial workaround
for the bug just identified in ATExecAddColumn. This is just code
beautification not a bug fix, so no back-patch.
Brendan Jurd, with some trivial additional cleanup by me.
checked to see if it's been initialized to all non-nulls. The implicit NOT
NULL constraint was not being checked during the ALTER (in fact, not even if
there was an explicit NOT NULL too), because ATExecAddColumn neglected to
set the flag needed to make the test happen. This has been broken since
the capability was first added, in 8.0.
Brendan Jurd, per a report from Kaloyan Iliev.
have pg_ctl warn about this.
Cancel running online backups (by renaming the backup_label file,
thus rendering the backup useless) when shutting down in fast mode.
Laurenz Albe
<craig@postnewspapers.com.au>.
It was my mistake, I missed limitation of number of held locks, now GIN doesn't
use continiuous locks, but still hold buffers pinned to prevent interference
with vacuum's deletion algorithm.
Backpatch is needed.
ordinary expressions. This probably doesn't catch every single case
where you might get "cache lookup failed for function 0" for use of a
shell operator, but it will catch most. Per bug #4120 from Pedro Gimeno.
This patch incidentally folds make_op_expr() into its sole remaining
caller --- the alternative was to give it yet more arguments, which
didn't seem an improvement.
output is not of the same type that's needed for the IN comparison (ie,
where the parser inserted an implicit coercion above the subselect result).
We should record the coerced expression, not just a raw Var referencing
the subselect output, as the quantity that needs to be unique-ified if
we choose to implement the IN as Unique followed by a plain join.
As of 8.3 this error was causing crashes, as seen in bug #4113 from Javier
Hernandez, because the executor was being told to hash or sort the raw
subselect output column using operators appropriate to the coerced type.
In prior versions there was no crash because the executor chose the
hash or sort operators for itself based on the column type it saw.
However, that's still not really right, because what's unique for one data
type might not be unique for another. In corner cases we could get multiple
outputs of a row that should appear only once, as demonstrated by the
regression test case included in this commit.
However, this patch doesn't apply cleanly to 8.2 or before, and the code
involved has shifted enough over time that I'm hesitant to try to back-patch.
Given the lack of complaints from the field about such corner cases, I think
the bug may not be important enough to risk breaking other things with a
back-patch.
UPDATE/SHARE couldn't occur as a subquery in a query with a non-SELECT
top-level operation. Symptoms included outright failure (as in report from
Mark Mielke) and silently neglecting to take the requested row locks.
Back-patch to 8.3, because the visible failure in the INSERT ... SELECT case
is a regression from 8.2. I'm a bit hesitant to back-patch further given the
lack of field complaints.
measure to get the Windows buildfarm members working again. I don't
know if it's worth exposing these as configurables, or exactly how to
do it in the MSVC build system ...
where Datum is 8 bytes wide. Since this will break old-style C functions
(those still using version 0 calling convention) that have arguments or
results of these types, provide a configure option to disable it and retain
the old pass-by-reference behavior. Likewise, provide a configure option
to disable the recently-committed float4 pass-by-value change.
Zoltan Boszormenyi, plus configurability stuff by me.
I never understood why initial authors GiST in pgsql choose so
stgrange signature for 'same' method:
bool *sameFn(Datum a, Datum b, bool* result)
instead of simple, logical
bool sameFn(Datum a, Datum b)
This change will break any existing GiST extension, so we still live with
it and will live.
uses of the long-deprecated float32 in contrib/seg; the definitions themselves
are still there, but no longer used. fmgr/README updated to match.
I added a CREATE FUNCTION to account for existing seg_center() code in seg.c
too, and some tests for it and the neighbor functions. At the same time,
remove checks for NULL which are not needed (because the functions are declared
STRICT).
I had to do some adjustments to contrib's btree_gist too. The choices for
representation there are not ideal for changing the underlying types :-(
Original patch by Zoltan Boszormenyi, with some adjustments by me.
file; the idea is that we should clean up as much as we can, even if there's
some problem removing one file. Make the error messages a bit less misleading,
too. In passing, const-ify function arguments.
place to prevent reusing relation OIDs before next checkpoint, and DROP
DATABASE. First, if a database was dropped, bgwriter would still try to unlink
the files that the rmtree() call by the DROP DATABASE command has already
deleted, or is just about to delete. Second, if a database is dropped, and
another database is created with the same OID, bgwriter would in the worst
case delete a relation in the new database that happened to get the same OID
as a dropped relation in the old database.
To fix these race conditions:
- make rmtree() ignore ENOENT errors. This fixes the 1st race condition.
- make ForgetDatabaseFsyncRequests forget unlink requests as well.
- force checkpoint on in dropdb on all platforms
Since ForgetDatabaseFsyncRequests() is asynchronous, the 2nd change isn't
enough on its own to fix the problem of dropping and creating a database with
same OID, but forcing a checkpoint on DROP DATABASE makes it sufficient.
Per Tom Lane's bug report and proposal. Backpatch to 8.3.
of each plan node, instead of its former behavior of dumping the internal
representation of the plan tree. The latter display is still available for
those who really want it (see debug_print_plan), but uses for it are certainly
few and and far between. Per discussion.
This patch also removes the explain_pretty_print GUC, which is obsoleted
by the change.
we had several code paths where a physical tlist could be used for the input
to a Sort node, which is a dumb idea because any unneeded table columns will
increase the volume of data the sort has to push around.
(Unfortunately the easy-looking fix of calling disuse_physical_tlist during
make_sort_xxx doesn't work because in most cases we're already committed to
the current input tlist --- it's been marked with sort column numbers, or
we've built grouping column numbers using it, etc. The tlist has to be
selected properly at the calling level before we start constructing sort-col
information. This is easy enough to do, we were just failing to take the
point into consideration.)
Back-patch to 8.3. I believe the problem probably exists clear back to 7.4
when the physical tlist optimization was added, but I'm afraid to back-patch
further than 8.3 without a great deal more study than I want to put into it.
The code in this area has drifted a lot over time. The real-world importance
of these code paths is uncertain anyway --- I think in many cases we'd
probably prefer hash-based methods.
of each plan node. For the moment this is debug support only and is
not enabled unless EXPLAIN_PRINT_TLISTS is defined at build time.
Later I'll see about the idea of letting EXPLAIN VERBOSE do it.
corrupted. (Neither is very important if SIGTERM is used to shut down the
whole database cluster together, but there's a problem if someone tries to
SIGTERM individual backends.) To do this, introduce new infrastructure
macros PG_ENSURE_ERROR_CLEANUP/PG_END_ENSURE_ERROR_CLEANUP that take care
of transiently pushing an on_shmem_exit cleanup hook. Also use this method
for createdb cleanup --- that wasn't a shared-memory-corruption problem,
but SIGTERM abort of createdb could leave orphaned files lying around.
Backpatch as far as 8.2. The shmem corruption cases don't exist in 8.1,
and the createdb usage doesn't seem important enough to risk backpatching
further.
it is trying to build a relcache entry for. This is an oversight in my 8.2
patch that tried to ensure we always took a lock on a relation before trying
to build its relcache entry. The implication is that if someone committed a
reindex of a critical system index at about the same time that some other
backend were starting up without a valid pg_internal.init file, the second one
might PANIC due to not seeing any valid version of the index's pg_class row.
Improbable case, but definitely not impossible.
"consistent" functions, and remove pg_amop.opreqcheck, as per recent
discussion. The main immediate benefit of this is that we no longer need
8.3's ugly hack of requiring @@@ rather than @@ to test weight-using tsquery
searches on GIN indexes. In future it should be possible to optimize some
other queries better than is done now, by detecting at runtime whether the
index match is exact or not.
Tom Lane, after an idea of Heikki's, and with some help from Teodor.
no particular need to do get_op_opfamily_properties() while building an
indexscan plan. Postpone that lookup until executor start. This simplifies
createplan.c a lot more than it complicates nodeIndexscan.c, and makes things
more uniform since we already had to do it that way for RowCompare
expressions. Should be a bit faster too, at least for plans that aren't
re-used many times, since we avoid palloc'ing and perhaps copying the
intermediate list data structure.
instead of plan time. Extend the amgettuple API so that the index AM returns
a boolean indicating whether the indexquals need to be rechecked, and make
that rechecking happen in nodeIndexscan.c (currently the only place where
it's expected to be needed; other callers of index_getnext are just erroring
out for now). For the moment, GIN and GIST have stub logic that just always
sets the recheck flag to TRUE --- I'm hoping to get Teodor to handle pushing
that control down to the opclass consistent() functions. The planner no
longer pays any attention to amopreqcheck, and that catalog column will go
away in due course.
the server version check is now always enforced. Relax the version check to
allow a server that is of pg_dump's own major version but a later minor
version; this is the only case that -i was at all safe to use in.
pg_restore already enforced only a very weak version check, so this is
really just a documentation change for it.
Per discussion.
going through DatumGetPointer or some other "official" conversion macro.
Not actually a bug, since Datum the same size as pointer is the only
supported case at the moment, but good cleanup for the future.
Gavin Sherry
systable_endscan_ordered that have API similar to systable_beginscan etc
(in particular, the passed-in scankeys have heap not index attnums),
but guarantee ordered output, unlike the existing functions. For the moment
these are just very thin wrappers around index_beginscan/index_getnext/etc.
Someday they might need to get smarter; but for now this is just a code
refactoring exercise to reduce the number of direct callers of index_getnext,
in preparation for changing that function's API.
In passing, remove index_getnext_indexitem, which has been dead code for
quite some time, and will have even less use than that in the presence
of run-time-lossy indexes.
input functions that include garbage bytes in their results. Provide a
compile-time option RANDOMIZE_ALLOCATED_MEMORY to make palloc fill returned
blocks with variable contents. This option also makes the parser perform
conversions of literal constants twice and compare the results, emitting a
WARNING if they don't match. (This is the code I used to catch the input
function bugs fixed in the previous commit.) For the moment, I've set it
to be activated automatically by --enable-cassert.
results to contain uninitialized, unpredictable values. While this was okay
as far as the datatypes themselves were concerned, it's a problem for the
parser because occurrences of the "same" literal might not be recognized as
equal by datumIsEqual (and hence not by equal()). It seems sufficient to fix
this in the input functions since the only critical use of equal() is in the
parser's comparisons of ORDER BY and DISTINCT expressions.
Per a trouble report from Marc Cousin.
Patch all the way back. Interestingly, array_in did not have the bug before
8.2, which may explain why the issue went unnoticed for so long.
indexscan always occurs in one call, and the results are returned in a
TIDBitmap instead of a limited-size array of TIDs. This should improve
speed a little by reducing AM entry/exit overhead, and it is necessary
infrastructure if we are ever to support bitmap indexes.
In an only slightly related change, add support for TIDBitmaps to preserve
(somewhat lossily) the knowledge that particular TIDs reported by an index
need to have their quals rechecked when the heap is visited. This facility
is not really used yet; we'll need to extend the forced-recheck feature to
plain indexscans before it's useful, and that hasn't been coded yet.
The intent is to use it to clean up 8.3's horrid @@@ kluge for text search
with weighted queries. There might be other uses in future, but that one
alone is sufficient reason.
Heikki Linnakangas, with some adjustments by me.
on win32, because the stat() function in the runtime cannot
be trusted to always update the st_size field.
Per report and research by Sergey Zubkovsky.
the columns it works with to be domains over the expected type, not just
exactly the expected type. In passing, fix ts_stat() the same way.
Per report from Markus Wollny.
modules are built. Foremost, it creates a solid distinction between these two
types of targets based on what had already been implemented and duplicated in
ad hoc ways before. Specifically,
- Dynamically loadable modules no longer get a soname. The numbers previously
set in the makefiles were dummy numbers anyway, and the presence of a soname
upset a few packaging tools, so it is nicer not to have one.
- The cumbersome detour taken on installation (build a libfoo.so.0.0.0 and
then override the rule to install foo.so instead) is removed.
- Lots of duplicated code simplified.
data. This makes for a significant speedup at the cost that the results
now vary between little-endian and big-endian machines; which forces us
to add explicit ORDER BYs in a couple of regression tests to preserve
machine-independent comparison results. Also, force initdb by bumping
catversion, since the contents of hash indexes will change (at least on
big-endian machines).
Kenneth Marshall and Tom Lane, based on work from Bob Jenkins. This commit
does not adopt Bob's new faster mix() algorithm, however, since we still need
to convince ourselves that that doesn't degrade the quality of the hashing.
currently support this because we must be able to build Vars referencing
join columns, and varattno is only 16 bits wide. Perhaps this should be
improved in future, but considering that it never came up before, I'm not
sure the problem is worth much effort. Per bug #4070 from Marcello
Ceschia.
The problem seems largely academic in 8.0 and 7.4, because they have
(different) O(N^2) performance issues with such wide joins, but
back-patch all the way anyway.
algorithm. This is a good deal slower than our old roundoff-error-prone
code for long inputs, so we keep the old code for use in the transcendental
functions, where everything is approximate anyway. Also create a
user-accessible function div(numeric, numeric) to provide access to the
exact result of trunc(x/y) --- since the regular numeric / operator will
round off its result, simply computing that expression in SQL doesn't
reliably give the desired answer. This fixes bug #3387 and various related
corner cases, and improves the usefulness of PG for high-precision integer
arithmetic.
classed all as "dead"; also get it to count DEAD item pointers as dead rows,
instead of ignoring them as before. Also improve matters so that tuples
previously inserted or deleted by our own transaction are handled nicely:
the stats collector's live-tuple and dead-tuple counts will end up correct
after our transaction ends, regardless of whether we end in commit or abort.
While there's more work that could be done to improve the counting of in-doubt
tuples in both VACUUM and ANALYZE, this commit is enough to alleviate some
known bad behaviors in 8.3; and the other stuff that's been discussed seems
like research projects anyway.
Pavan Deolasee and Tom Lane
responsible for copying the query string into the new Portal. Such copying
is unnecessary in the common code path through exec_simple_query, and in
this case it can be enormously expensive because the string might contain
a large number of individual commands; we were copying the entire, long
string for each command, resulting in O(N^2) behavior for N commands.
(This is the cause of bug #4079.) A second problem with it is that
PortalDefineQuery really can't risk error, because if it elog's before
having set up the Portal, we will leak the plancache refcount that the
caller is trying to hand off to the portal. So go back to the design in
which the caller is responsible for making sure everything is copied into
the portal if necessary.
that is commands that have out-of-line parameters but the plan is prepared
assuming that the parameter values are constants. This is needed for the
plpgsql EXECUTE USING patch, but will probably have use elsewhere.
This commit includes the SPI functions and documentation, but no callers
nor regression tests. The upcoming EXECUTE USING patch will provide
regression-test coverage. I thought committing this separately made
sense since it's logically a distinct feature.
eval_const_expressions needs to be passed the PlannerInfo ("root") structure,
because in some cases we want it to substitute values for Param nodes.
(So "constant" is not so constant as all that ...) This mistake partially
disabled optimization of unnamed extended-Query statements in 8.3: in
particular the LIKE-to-indexscan optimization would never be applied if the
LIKE pattern was passed as a parameter, and constraint exclusion depending
on a parameter value didn't work either.
while EState still contains pointers to those relations. Exposed by the
CLOBBER_CACHE_ALWAYS tests that buildfarm member jaguar is running (I knew
those cycles would pay off...)
key files that are similar to the one for the postmaster's data directory
permissions check. (I chose to standardize on that one since it's the most
heavily used and presumably best-wordsmithed by now.) Also eliminate explicit
tests on file ownership in these places, since the ensuing read attempt must
fail anyway if it's wrong, and there seems no value in issuing the same error
message for distinct problems. (But I left in the explicit ownership test in
postmaster.c, since it had its own error message anyway.) Also be more
specific in the documentation's descriptions of these checks. Per a gripe
from Kevin Hunter.
The places that did, eg,
(statbuf.st_mode & S_IFMT) == S_IFDIR
were correct, but there is no good reason not to use S_ISDIR() instead,
especially when that's what the other 90% of our code does. The places
that did, eg,
(statbuf.st_mode & S_IFDIR)
were flat out *wrong* and would fail in various platform-specific ways,
eg a symlink could be mistaken for a regular file on most Unixen.
The actual impact of this is probably small, since the problem cases
seem to always involve symlinks or sockets, which are unlikely to be
found in the directories that PG code might be scanning. But it's
clearly trouble waiting to happen, so patch all the way back anyway.
(There seem to be no occurrences of the mistake in 7.4.)
where the relation name was schema-qualified, for example
UPDATE foo.bar SET <tab>
Also support cases where the relation name was quoted unnecessarily,
for example
UPDATE "foo" SET <tab>
Greg Sabino Mullane, slightly simplified by myself.
useless for an ungrouped-aggregate query holds regardless of whether
optimize_minmax_aggregates succeeds. So we might as well apply the
optimization in any case.
I'll leave 8.3 as it was, since this version is a tad more invasive
than my earlier patch.
the query result must be exactly one row (since we don't do this when there's
any GROUP BY). Therefore any ORDER BY or DISTINCT attached to the query is
useless and can be dropped. Aside from saving useless cycles, this protects
us against problems with matching the hacked-up tlist entries to sort clauses,
as seen in a bug report from Taiki Yamaguchi. We might need to work harder
if we ever try to optimize grouped queries with this approach, but this
solution will do for now.
inclusions in src/include/catalog/*.h files. The main idea here is to push
function declarations for src/backend/catalog/*.c files into separate headers,
rather than sticking them into the corresponding catalog definition file as
has been done in the past. This commit only carries out that idea fully for
pg_proc, pg_type and pg_conversion, but that's enough for the moment ---
if pg_list.h ever becomes unsafe for frontend code to include, we'll need
to work a bit more.
Zdenek Kotala
snapmgmt.c file for the former. The header files have also been reorganized
in three parts: the most basic snapshot definitions are now in a new file
snapshot.h, and the also new snapmgmt.h keeps the definitions for snapmgmt.c.
tqual.h has been reduced to the bare minimum.
This patch is just a first step towards managing live snapshots within a
transaction; there is no functionality change.
Per my proposal to pgsql-patches on 20080318191940.GB27458@alvh.no-ip.org and
subsequent discussion.
strings. This patch introduces four support functions cstring_to_text,
cstring_to_text_with_len, text_to_cstring, and text_to_cstring_buffer, and
two macros CStringGetTextDatum and TextDatumGetCString. A number of
existing macros that provided variants on these themes were removed.
Most of the places that need to make such conversions now require just one
function or macro call, in place of the multiple notational layers that used
to be needed. There are no longer any direct calls of textout or textin,
and we got most of the places that were using handmade conversions via
memcpy (there may be a few still lurking, though).
This commit doesn't make any serious effort to eliminate transient memory
leaks caused by detoasting toasted text objects before they reach
text_to_cstring. We changed PG_GETARG_TEXT_P to PG_GETARG_TEXT_PP in a few
places where it was easy, but much more could be done.
Brendan Jurd and Tom Lane
identical to tuplestore_puttuple(), except it operates on arrays of
Datums + nulls rather than a fully-formed HeapTuple. In several places
that use the tuplestore API, this means we can avoid creating a
HeapTuple altogether, saving a copy.
knowledge up through any joins it participates in. We were doing that already
in some special cases but not in the general case. Also, defend against zero
row estimates for the input relations in cost_mergejoin --- this fix may have
eliminated the only scenario in which that can happen, but be safe. Per
report from Alex Solovey.
friends. Avoid double translation of some messages, ensure other messages
are exposed for translation (and make them follow the style guidelines),
avoid unsafe passing of an unpredictable message text as a format string.
query texts only to the server log. This eliminates the issue of possible
leaking of security-sensitive data in other sessions' queries. Since the
log is presumed secure, we can now log the queries of all sessions involved
in the deadlock, whether or not they belong to the same user as the one
reporting the failure.
errdetail except the string goes only to the server log, replacing the normal
errdetail there. This provides a reasonably clean way of dealing with error
details that are too security-sensitive or too bulky to send to the client.
This commit just adds the infrastructure --- actual uses to follow.
except that it returns the string 'NULL', rather than a SQL null, when called
with a null argument. This is often a much more useful behavior for
constructing dynamic queries. Add more discussion to the documentation
about how to use these functions.
Brendan Jurd
(if they'd be visible to the current user in pg_stat_activity).
This might look like it's subject to race conditions, but it's actually
pretty safe because at the time DeadLockReport() is constructing the
report, we haven't yet aborted our transaction and so we can expect that
everyone else involved in the deadlock is still blocked on some lock.
(There are corner cases where that might not be true, such as a statement
timeout triggering in another backend before we finish reporting; but at
worst we'd report a misleading activity string, so it seems acceptable
considering the usefulness of reporting the queries.)
Original patch by Itagaki Takahiro, heavily modified by me.
a new typedef TimeOffset to represent an intermediate time value. It's
either int64 or double as appropriate, and in most usages will be measured
in microseconds or seconds the same as Timestamp. We don't call it
Timestamp, though, since the value doesn't necessarily represent an absolute
time instant.
Warren Turkal
directly to all the member expressions, instead of the previous implementation
where the ARRAY[] constructor would infer a common element type and then we'd
coerce the finished array after the fact. This has a number of benefits,
one being that we can allow an empty ARRAY[] construct so long as its
element type is specified by such a cast.
Brendan Jurd, minor fixes by me.
dumps can be loaded into databases without the same tablespaces that the
source had. The option acts by suppressing all "SET default_tablespace"
commands, and also CREATE TABLESPACE commands in pg_dumpall's case.
Gavin Roy, with documentation and minor fixes by me.
ISO_8859-5 <-> MULE_INTERNAL conversion tables.
This was discovered when trying to convert a string containing those characters
from ISO_8859-5 to Windows-1251, because we use MULE_INTERNAL/KOI8R as an
intermediate encoding between those two.
While the missing "Yo" was just an omission in the conversion tables, there are
a few other characters like the "Numero" sign ("No" as a single character) that
exists in all the other cyrillic encodings (win1251, ISO_8859-5 and cp866), but
not in KOI8R. Added comments about that.
Patch by Sergey Burladyan. Back-patch to 7.4.
case where there is a match to the pattern overall but the user has specified
a parenthesized subexpression and that subexpression hasn't got a match.
An example is substring('foo' from 'foo(bar)?'). This should return NULL,
since (bar) isn't matched, but it was mistakenly returning the whole-pattern
match instead (ie, 'foo'). Per bug #4044 from Rui Martins.
This has been broken since the beginning; patch in all supported versions.
The old behavior was sufficiently inconsistent that it's impossible to believe
anyone is depending on it.
are declared to return set, and consist of just a single SELECT. We
can replace the FROM-item with a sub-SELECT and then optimize much as
if we were dealing with a view. Patch from Richard Rowell, cleaned up
by me.
errors in any commands, including in various clean targets that have so far
been handled inconsistently. make -i is available to ignore all errors in
a consistent and official way.
during a bitmap index scan. This cannot affect the query results
(since we're just dumping the TIDs into a bitmap) but it might offer
some advantage in locality of access to the index. Per Greg Stark.
value for a precision is negative, act as though precision weren't
specified at all, that is the whole .* part of the format spec should
be ignored. Our previous coding took it as .0 which is certainly
wrong. Per report from Kris Jurka and local testing.
Possibly this should be back-patched, but it would be good to get
some more testing first; in any case there are no known cases where
there's really a problem on the backend side.
support DTrace in the future.
Switch from using DTRACE_PROBEn macros to the dynamically generated macros.
Use "dtrace -h" to create a header file that contains the dynamically
generated macros to be used in the source code instead of the DTRACE_PROBEn
macros. A dummy header file is generated for builds without DTrace support.
Author: Robert Lor <Robert.Lor@sun.com>
oprofile shows that a nontrivial amount of time is being spent in
repeated calls to index_getprocinfo, which really only needs to be
called once. So do that, and inline _hash_datum2hashkey to make it
work.
linear search when checking child-transaction XIDs. This makes for an
important speedup in transactions that have large numbers of children,
as in a recent example from Craig Ringer. We can also get rid of an
ugly kluge that represented lists of TransactionIds as lists of OIDs.
Heikki Linnakangas
bucket number, so as to ensure locality of access to the index during the
insertion step. Without this, building an index significantly larger than
available RAM takes a very long time because of thrashing. On the other
hand, sorting is just useless overhead when the index does fit in RAM.
We choose to sort when the initial index size exceeds effective_cache_size.
This is a revised version of work by Tom Raney and Shreya Bhargava.
deals with the queue, including locking etc, is all in sinvaladt.c. This means
that the struct definition of the queue, and the queue pointer, are now
internal "implementation details" inside sinvaladt.c.
Per my proposal dated 25-Jun-2007 and followup discussion.
two buckets at the start, we create a number of buckets appropriate for the
estimated size of the table. This avoids a lot of expensive bucket-split
actions during initial index build on an already-populated table.
This is one of the two core ideas of Tom Raney and Shreya Bhargava's patch
to reduce hash index build time. I'm committing it separately to make it
easier for people to test the effects of this separately from the effects
of their other core idea (pre-sorting the index entries by bucket number).
This accidentally failed to fail before 8.3, because the context we were
switching back to was long-lived anyway; but it sure looks risky as can be
now. Well spotted by Pavan Deolasee.
that are reported as "equal" by wcscoll() are checked to see if they really
are bitwise equal, and are sorted per strcmp() if not. We made this happen
a couple of years ago in the regular code path, but it unaccountably got
left out of the Windows/UTF8 case (probably brain fade on my part at the
time). As in the prior set of changes, affected users may need to reindex
indexes on textual columns.
Backpatch as far as 8.2, which is the oldest release we are still supporting
on Windows.
messages if the calling transaction aborts later on. Collapsing out line
pointer redirects is a done deal as soon as we complete the page update,
so syscache *must* be notified even if the VACUUM FULL as a whole doesn't
complete. To fix, add some functionality to inval.c to allow the pending
inval messages to be sent immediately while heap_page_prune is still
running. The implementation is a bit chintzy: it will only work in the
context of VACUUM FULL. But that's all we need now, and it can always be
extended later if needed. Per my trouble report of a week ago.
(probably NULL) before exiting. Up to now it's just left the variable as it
set it, which means that after we're done processing the current client
message, ActiveSnapshot is probably pointing at garbage (because this function
is typically run in MessageContext which will get reset). There doesn't seem
to have been any code path in which that mattered before 8.3, but now the
plancache module might try to use the stale value if the next client message
is a Bind for a prepared statement that is in need of replanning. Per report
from Alex Hunsaker.
pg_listener modifications commanded by LISTEN and UNLISTEN until the end
of the current transaction. This allows us to hold the ExclusiveLock on
pg_listener until after commit, with no greater risk of deadlock than there
was before. Aside from fixing the race condition, this gets rid of a
truly ugly kludge that was there before, namely having to ignore
HeapTupleBeingUpdated failures during NOTIFY. There is a small potential
incompatibility, which is that if a transaction issues LISTEN or UNLISTEN
and then looks into pg_listener before committing, it won't see any resulting
row insertion or deletion, where before it would have. It seems unlikely
that anyone would be depending on that, though.
This patch also disallows LISTEN and UNLISTEN inside a prepared transaction.
That case had some pretty undesirable properties already, such as possibly
allowing pg_listener entries to be made for PIDs no longer present, so
disallowing it seems like a better idea than trying to maintain the behavior.
test=> \copy billing_data from ../BillingSamplePricerFile.csv with csv
header quote as '"' null as 'abc' null as '123'
\copy: parse error at "null"
Per report from Stephen Frost
before it goes groveling through the ProcArray. In situations where the same
recently-committed transaction ID is checked repeatedly by tqual.c, this saves
a lot of shared-memory searches. And it's cheap enough that it shouldn't
hurt noticeably when it doesn't help.
Concept and patch by Simon, some minor tweaking and comment-cleanup by Tom.
than dividing them into 1GB segments as has been our longtime practice. This
requires working support for large files in the operating system; at least for
the time being, it won't be the default.
Zdenek Kotala
variables to it. More need to be converted, but I wanted to get this in
before it conflicts with too much...
Other than just centralising the text-to-int conversion for parameters,
this allows the pg_settings view to contain a list of available options
and allows an error hint to show what values are allowed.
With the addition of multiple autovacuum workers, our choices were to delete
the check, document the interaction with autovacuum_max_workers, or complicate
the check to try to hide that interaction. Since this restriction has never
been adequate to ensure backends can't run out of pinnable buffers, it doesn't
really have enough excuse to live to justify the second or third choices.
Per discussion of a complaint from Andreas Kling (see also bug #3888).
This commit also removes several documentation references to this restriction,
but I'm not sure I got them all.
pattern-examination heuristic method to purely histogram-driven selectivity at
histogram size 100, we compute both estimates and use a weighted average.
The weight put on the heuristic estimate decreases linearly with histogram
size, dropping to zero for 100 or more histogram entries.
Likewise in ltreeparentsel(). After a patch by Greg Stark, though I
reorganized the logic a bit to give the caller of histogram_selectivity()
more control.
of the generated range condition var >= 'foo' AND var < 'fop' as being less
than what eqsel() would estimate for var = 'foo'. This is intuitively
reasonable and it gets rid of the need for some entirely ad-hoc coding we
formerly used to reject bogus estimates. The basic problem here is that
if the prefix is more than a few characters long, the two boundary values
are too close together to be distinguishable by comparison to the column
histogram, resulting in a selectivity estimate of zero, which is often
not very sane. Change motivated by an example from Peter Eisentraut.
Arguably this is a bug fix, but I'll refrain from back-patching it
for the moment.
it accumulates the set of changes to be made and then applies them. It had
to accumulate the set of changes anyway to prepare a WAL record for the
pruning action, so this isn't an enormous change; the only new complexity is
to not doubly mark tuples that are visited twice in the scan. The main
advantage is that we can substantially reduce the scope of the critical
section in which the changes are applied, thus avoiding PANIC in foreseeable
cases like running out of memory in inval.c. A nice secondary advantage is
that it is now far clearer that WAL replay will actually do the same thing
that the original pruning did.
This commit doesn't do anything about the open problem that
CacheInvalidateHeapTuple doesn't have the right semantics for a CTID change
caused by collapsing out a redirect pointer. But whatever we do about that,
it'll be a good idea to not do it inside a critical section.
available output buffer when presented with corrupt input. Some testing
suggests that this slows the decompression loop about 1%, which seems an
acceptable price to pay for more robustness. (Curiously, the penalty
seems to be *less* on not-very-compressible data, which I didn't expect
since the overhead per output byte ought to be more in the literal-bytes
path.)
Patch from Zdenek Kotala. I fixed a corner case and did some renaming
of variables to make the routine more readable.
were discussed last year, but we felt it was too late in the 8.3 cycle to
change the code immediately. Specifically, the patch:
* Reduces the minimum datum size to be considered for compression from
256 to 32 bytes, as suggested by Greg Stark.
* Increases the required compression rate for compressed storage from
20% to 25%, again per Greg's suggestion.
* Replaces force_input_size (size above which compression is forced)
with a maximum size to be considered for compression. It was agreed
that allowing large inputs to escape the minimum-compression-rate
requirement was not bright, and that indeed we'd rather have a knob
that acted in the other direction. I set this value to 1MB for the
moment, but it could use some performance studies to tune it.
* Adds an early-failure path to the compressor as suggested by Jan:
if it's been unable to find even one compressible substring in the
first 1KB (parameterizable), assume we're looking at incompressible
input and give up. (Possibly this logic can be improved, but I'll
commit it as-is for now.)
* Improves the toasting heuristics so that when we have very large
fields with attstorage 'x' or 'e', we will push those out to toast
storage before considering inline compression of shorter fields.
This also responds to a suggestion of Greg's, though my original
proposal for a solution was a bit off base because it didn't fix
the problem for large 'e' fields.
There was some discussion in the earlier threads of exposing some
of the compression knobs to users, perhaps even on a per-column
basis. I have not done anything about that here. It seems to me
that if we are changing around the parameters, we'd better get some
experience and be sure we are happy with the design before we set
things in stone by providing user-visible knobs.
TopMemoryContext, rather than scattered through executor per-query contexts.
This poses no danger of memory leak since the ResourceOwner mechanism
guarantees release of no-longer-needed items. It is needed because the
per-query context might already be released by the time we try to clean up
the hash scan list. Report by ykhuang, diagnosis by Heikki.
Back-patch to 8.0, where the ResourceOwner-based cleanup was introduced.
The given test case does not fail before 8.2, probably because we rearranged
transaction abort processing somehow; but this coding is undoubtedly risky
so I'll patch 8.0 and 8.1 anyway.
Andrew Dunstan
Tom Lane
Peter Eisentraut
Heikki Linnakangas
Alvaro Herrera
Magnus Hagander
Teodor Sigaev
Bruce Momjian
Michael Meskes
Neil Conway
Tatsuo Ishii