Commit c6e0fe1f2 was a shade too trusting that any pointer passed
to pfree, repalloc, etc will point at a valid chunk. Notably,
passing a pointer that was actually obtained from malloc tended
to result in obscure assertion failures, if not worse. (On FreeBSD
I've seen such mistakes take down the entire cluster, seemingly as
a result of clobbering shared memory.)
To improve matters, extend the mcxt_methods[] array so that it
has entries for every possible MemoryContextMethodID bit-pattern,
with the currently unassigned ID codes pointing to error-reporting
functions. Then, fiddle with the ID assignments so that patterns
likely to be associated with bad pointers aren't valid ID codes.
In particular, we should avoid assigning bit patterns 000 (zeroed
memory) and 111 (wipe_mem'd memory).
It turns out that on glibc (Linux), malloc uses chunk headers that
have flag bits in the same place we keep MemoryContextMethodID,
and that the bit patterns 000, 001, 010 are the only ones we'll
see as long as the backend isn't threaded. So we can have very
robust detection of pfree'ing a malloc-assigned block on that
platform, at least so long as we can refrain from using up those
ID codes. On other platforms, we don't have such a good guarantee,
but keeping 000 reserved will be enough to catch many such cases.
While here, make GetMemoryChunkMethodID() local to mcxt.c, as there
seems no need for it to be exposed even in memutils_internal.h.
Patch by me, with suggestions from Andres Freund and David Rowley.
Discussion: https://postgr.es/m/2910981.1665080361@sss.pgh.pa.us
This substantially speeds up building for windows, due to the vast amount of
headers included via windows.h. A cross build from linux targetting mingw goes
from
994.11user 136.43system 0:31.58elapsed 3579%CPU
to
422.41user 89.05system 0:14.35elapsed 3562%CPU
The wins on windows are similar-ish (but I don't have a system at hand just
now for actual numbers). Targetting other operating systems the wins are far
smaller (tested linux, macOS, FreeBSD).
For now precompiled headers are disabled by default, it's not clear how well
they work on all platforms. E.g. on FreeBSD gcc doesn't seem to have working
support, but clang does.
When doing a full build precompiled headers are only beneficial for targets
with multiple .c files, as meson builds a separate precompiled header for each
target (so that different compilation options take effect). This commit
therefore only changes target with at least two .c files to use precompiled
headers.
Because this commit adds b_pch=false to the default_options new build
directories will have precompiled headers disabled by default, however
existing build directories will continue use the default value of b_pch, which
is true.
Note that using precompiled headers with ccache requires setting
CCACHE_SLOPPINESS=pch_defines,time_macros to get hits.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CA+hUKG+50eOUbN++ocDc0Qnp9Pvmou23DSXu=ZA6fepOcftKqA@mail.gmail.com
Discussion: https://postgr.es/m/c5736f70-bb6d-8d25-e35c-e3d886e4e905@enterprisedb.com
Discussion: https://postgr.es/m/20190826054000.GE7005%40paquier.xyz
Previously, the subscription stats entry was created when the first
stats, i.e., an error on apply worker or tablesync worker, were
reported. Therefore, the stats_reset field was not updated by
pg_stat_reset_subscription_stats() if the stats entry was not
populated yet, which was different behavior than other statistics.
This change creates the subscription stats entry and initializes it at
CREATE SUBSCRIPTION time.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAAKRu_Zqd-e5imT_3-ZiQv1cfsWuy16OJTiUaCvqpq4V7GVdSg@mail.gmail.com
When using precompiled headers, we cannot pre-define macros for the system
headers from within .c files, as headers are already processed before
the #define in the C file is reached. But we can pre-define using
-DFD_SETSIZE, as long as that's also used when building the precompiled header.
A few files #define FD_SETSIZE 1024 on windows, as the default is only 64. I
am hesitant to change FD_SETSIZE globally on windows, due to
src/backend/port/win32/socket.c using it to size on-stack arrays. Instead add
-DFD_SETSIZE=1024 when building the specific targets needing it.
We likely should move away from using select() in those places, but that's a
larger change.
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20221005190829.lda7ttalh4mzrvf4@awork3.anarazel.de
Discussion: https://postgr.es/m/CA+hUKG+50eOUbN++ocDc0Qnp9Pvmou23DSXu=ZA6fepOcftKqA@mail.gmail.com
Discussion: https://postgr.es/m/20190826054000.GE7005%40paquier.xyz
MemoryContextContains is no longer reliable in the wake of c6e0fe1f2,
because there's no longer very much redundancy in chunk headers.
(It wasn't *completely* reliable even before that, as there was a
chance of a false positive if you passed it something that didn't
point to an mcxt chunk at all. But it was generally good enough.)
Hence, remove it. There is no remaining core code that requires it.
Extensions that have been using it might be able to substitute a
test like "GetMemoryChunkContext(ptr) == context", recognizing that
this explicitly requires that the pointer point to some chunk.
Tom Lane and David Rowley
Discussion: https://postgr.es/m/1913788.1664898906@sss.pgh.pa.us
MemoryContextContains is no longer reliable in the wake of c6e0fe1f2,
so we need to get rid of these uses.
It appears that there's no really good reason to force the result of
an aggregate's finalfn or serialfn to be allocated in the per-tuple
context. The only other plausible case is that the result points to
or into the aggregate's transition value, and that's fine because it
will last as long as we need it to. (This conclusion depends on the
assumption that finalfns are not allowed to scribble on the transition
value, but we've long required that.) So we can just drop the
MemoryContextContains plus datumCopy business, although we do need
to take care to not return a read-write pointer when the transition
value is an expanded datum.
Likewise, we don't really need to force the result of a window
function to be in the output context. In this case, the plausible
alternative is that it's pointing into the temporary tuple slot used
by WinGetFuncArgInPartition or WinGetFuncArgInFrame (since those
functions could return such a pointer, which might become the window
function's result). That will hold still for long enough, unless
there is another window function using the same WindowObject.
I'm content to always perform a datumCopy when there's more than one
such function.
On net, these changes should provide small speed improvements as well
as removing problematic code.
Tom Lane and David Rowley
Discussion: https://postgr.es/m/1913788.1664898906@sss.pgh.pa.us
The RecoveryLockLists data structure, which tracks all exclusive
locks that the startup process is holding on behalf of transactions
being replayed, did not have any provision for avoiding duplicate
entries for the same lock. Maybe that was okay when the code was
first written. However, modern practice is for checkpoints to
write fresh lists of all active exclusive locks into the WAL.
Thus, an exclusive lock that survives across multiple checkpoints
causes bloat in standbys' startup processes. If there are a lot
of such locks this can look like a memory leak, and it's even
possible to drive the startup process into a palloc failure from
an over-length List.
To fix, use a hash table instead of simple lists to track the
locks being held. Allowing for dynahash overhead, this requires
a little more space per lock than the old way (although it's the
same size as what we were allocating prior to c6e0fe1f2). It's
probably a shade slower too. However, testing indicates that the
penalty is negligible on ordinary workloads, so let's make this
change to improve robustness in extreme cases.
Patch by me, per report from Dmitriy Kuzmin. No back-patch
(for now anyway), since it seems that a significant improvement
would only occur in corner cases.
Discussion: https://postgr.es/m/CAHLDt=_ts0A7Agn=hCpUh+RCFkxd+G6uuT=kcTfqFtGur0dp=A@mail.gmail.com
The t_iseq() macro does not need to be guarded by a character
length check (at least when the comparison value is an ASCII
character, as its documentation requires). Some portions of
contrib/ltree hadn't read that memo, so simplify them.
The last change in gettoken_query,
- else if (charlen == 1 && !t_iseq(state->buf, ' '))
+ else if (!t_iseq(state->buf, ' '))
looks like it's actually a bug fix: I doubt that the intention
was to silently ignore multibyte characters as if they were
whitespace. I'm not tempted to back-patch though, because this
will have the effect of tightening what is allowed in ltxtquery
strings.
Discussion: https://postgr.es/m/2548310.1664999615@sss.pgh.pa.us
ts_locale.c omitted support for "isalnum" tests, perhaps on the
grounds that there were initially no use-cases for that. However,
both ltree and pg_trgm need such tests, and we do also have one
use-case now in the core backend. The workaround of testing
isalpha and isdigit separately seems quite inefficient, especially
when dealing with multibyte characters; so let's fill in the
missing support.
Discussion: https://postgr.es/m/2548310.1664999615@sss.pgh.pa.us
The test is changed to test for connection strings rather than specific
roles, and the reset logic of pg_hba.conf is extended so as the database
and user name entries can be directly specified. This is aimed at being
used as a base for more test scenarios of pg_hba.conf and authentication
paths.
Author: Bertrand Drouvot, Michael Paquier
Discussion: https://postgr.es/m/Yz0xO0emJ+mxtj2a@paquier.xyz
This optional parameter can be specified in cases where there are nested
PG_TRY() statements within a function in order to stop the compiler from
issuing warnings about shadowed local variables when compiling with
-Wshadow. The optional parameter is used as a suffix on the variable
names declared within the PG_TRY(), PG_CATCH(), PG_FINALLY() and
PG_END_TRY() macros. The parameter, if specified, must be the same in
each component macro of the given PG_TRY() block.
This also adjusts the single case where we have nested PG_TRY() statements
to add a parameter to the inner-most PG_TRY().
This reduces the number of compiler warnings when compiling with
-Wshadow=compatible-local from 5 down to 1.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvqWGMdB_pATeUqE=JCtNqNxObPOJ00jFEa2_sZ20j_Wvg@mail.gmail.com
The generated resource files aren't exactly the same ones as the old
buildsystems generate. Previously "InternalName" and "OriginalFileName" were
mostly wrong / not set (despite being required), but that was hard to fix in
at least the make build. Additionally, the meson build falls back to a
"auto-generated" description when not set, and doesn't set it in a few cases -
unlikely that anybody looks at these descriptions in detail.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Required for correct resource file generation, as the resource files should
only be added to the shared library.
This also fixes a bunch of issues in the .pc files.
Previously I tried to avoid building sources twice, once for the static and
once for the shared libraries. We could still do so, but it's not clear that
it's worth the complication.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20220927011951.j3h4o7n6bhf7dwau@awork3.anarazel.de
Improvements:
- we don't need -DFRONTEND for libpq anymore since 1d77afefbd
- the .pc file contents for a static libpq were wrong (referencing
{pgport, common}_shlib)
- incidentally fixes meson not supporting link_whole on AIX yet
- added explanatory comments
Previously I tried to avoid building libpq's sources twice, once for the
static and once for the shared library. We could still do so, but it's not
clear that it's worth the complication.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
meson/ninja do not support specifying dependencies via globs (as those make it
significantly more expensive to check the current build state). Instead
targets should emit dependency information when running that then can be
cheaply re-checked during future builds.
To handle xmllint and xsltproc invocations in the docs, add and use a wrapper
that uses --load-trace to collect dependency information.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/c5736f70-bb6d-8d25-e35c-e3d886e4e905@enterprisedb.com
In a similar effort to f01592f91, here we mostly rename shadowed local
variables to remove the warnings produced when compiling with
-Wshadow=compatible-local.
This fixes 63 warnings and leaves just 5.
Author: Justin Pryzby, David Rowley
Reviewed-by: Justin Pryzby
Discussion https://postgr.es/m/20220817145434.GC26426%40telsasoft.com
When scanning for the end of WAL, pg_resetwal has been maintaining its
own internal logic to calculate segment numbers and to parse a WAL
segment name for its timeline and segment number. The code claimed for
example that XLogFromFileName() cannot be used because it lacks the
possibility of specifying a WAL segment size, which is not the case
since fc49e24, that has made the WAL segment size configurable at
initialization time, extending this routine to do so.
Similarly, this switches one segment number calculation to use
XLByteToSeg() rather than the same logic present in xlog_internal.h.
While on it, switch to TimeLineID in pg_resetwal.c for TLI numbers
parsed from segment names, to be more consistent with
XLogFromFileName(). The maths are exactly the same, but the code gets
simplified.
Author: Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/CALj2ACX+E_jnwqH_jmjhNG8BczJTNRTOLpw8K1CB1OcB48MJ8w@mail.gmail.com
This improves the tab completion of psql on a few points:
- Provide a list of subscriptions on \dRs.
- Provide a list of publications on \dRp.
- Add CURRENT_ROLE, CURRENT_USER, SESSION_USER when OWNER TO is provided
at the end of a query (as defined by RoleSpec in gram.y).
Author: Vignesh C
Reviewed-by: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/CALDaNm3toRBt6c6saY3174f7CsGztXRvVvfWbikkJEXY7x5WAA@mail.gmail.com
This cleans up a couple of areas:
- Remove XLogSegNo calculation for the last WAL segment in backup in
xlog.c (7d70809 has moved this logic entirely to xlogbackup.c when
building the contents of the backup history file).
- Remove check on log_min_duration in analyze.c, as it is already true
where this code path is reached.
- Simplify call to find_option() in guc.c.
Author: Ranier Vilela
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/CAEudQArCDQQiPiFR16=yu9k5s2tp4tgEe1U1ZbkW4ofx81AWWQ@mail.gmail.com
This commit expands the TAP tests of pg_upgrade when running these with
different major versions for the "old" cluster (to-be-upgraded) and the
"new" cluster (upgraded-to), by backporting some of the buildfarm
facilities directory into the script:
- Remove comments from the dump files, avoiding version-dependent
information.
- Remove empty lines from the dump files.
- Use --extra-float-digits=0 in the pg_dump command, when using an "old"
cluster with version equal to or lower than v11.
- Use --wal-segsize and --allow-group-access in initdb only when the
"old" cluster is equal to or higher than v11.
This allows the tests to pass down to v14 with the main regression test
suite, while v9.5~13 still generate some diffs, but these are minimal
compared to what happened before this commit. Much more could be done,
especially around dump differences with function and procedures (these
can also be avoided with direct manipulation of the dumps loaded, for
example, in a way similar to the buildfarm), but at least the basics are
in place now.
Reviewed-by: Justin Pryzby, Anton A. Melnikov
Discussion: https://postgr.es/m/Yox1ME99GhAemMq1@paquier.xyz
Otherwise we don't use LLVM's flags when building llvmjit_wrap.cpp and
llvmjit_inline.cpp. That can cause compile time failures if the C++ compiler
doesn't default to a new enough C++ standards version and link time failures
due to ABI influencing flags like -fno-rtti.
The pre-v15 behavior was to discard all but the last result,
but with the new behavior of printing all results by default,
we will send each such result to the \g file. However,
we're still opening and closing the \g file for each result,
so you lose all but the last result anyway. Move the output-file
state up to ExecQueryAndProcessResults so that we open/close the
\g file only once per command string.
To support this without changing other behavior, we must
adjust PrintQueryResult to have separate FILE * arguments
for query and status output (since status output has never
gone to the \g file). That in turn makes it a good idea
to push the responsibility for fflush'ing output down to
PrintQueryTuples and PrintQueryStatus.
Also fix an infinite loop if COPY IN/OUT is attempted in \watch.
We used to reject that, but that error exit path got broken
somewhere along the line in v15. There seems no real reason
to reject it anyway as the code now stands, so just remove
the error exit and make sure that COPY OUT data goes to the
right place.
Also remove PrintQueryResult's unused is_watch parameter,
and make some other cosmetic cleanups (adjust obsolete
comments, break some overly-long lines).
Daniel Vérité and Tom Lane
Discussion: https://postgr.es/m/4333844c-2244-4d6e-a49a-1d483fbe304f@manitou-mail.org
This reverts commit db0d67db24 and
several follow-on fixes. The idea of making a cost-based choice
of the order of the sorting columns is not fundamentally unsound,
but it requires cost information and data statistics that we don't
really have. For example, relying on procost to distinguish the
relative costs of different sort comparators is pretty pointless
so long as most such comparator functions are labeled with cost 1.0.
Moreover, estimating the number of comparisons done by Quicksort
requires more than just an estimate of the number of distinct values
in the input: you also need some idea of the sizes of the larger
groups, if you want an estimate that's good to better than a factor of
three or so. That's data that's often unknown or not very reliable.
Worse, to arrive at estimates of the number of calls made to the
lower-order-column comparison functions, the code needs to make
estimates of the numbers of distinct values of multiple columns,
which are necessarily even less trustworthy than per-column stats.
Even if all the inputs are perfectly reliable, the cost algorithm
as-implemented cannot offer useful information about how to order
sorting columns beyond the point at which the average group size
is estimated to drop to 1.
Close inspection of the code added by db0d67db2 shows that there
are also multiple small bugs. These could have been fixed, but
there's not much point if we don't trust the estimates to be
accurate in-principle.
Finally, the changes in cost_sort's behavior made for very large
changes (often a factor of 2 or so) in the cost estimates for all
sorting operations, not only those for multi-column GROUP BY.
That naturally changes plan choices in many situations, and there's
precious little evidence to show that the changes are for the better.
Given the above doubts about whether the new estimates are really
trustworthy, it's hard to summon much confidence that these changes
are better on the average.
Since we're hard up against the release deadline for v15, let's
revert these changes for now. We can always try again later.
Note: in v15, I left T_PathKeyInfo in place in nodes.h even though
it's unreferenced. Removing it would be an ABI break, and it seems
a bit late in the release cycle for that.
Discussion: https://postgr.es/m/TYAPR01MB586665EB5FB2C3807E893941F5579@TYAPR01MB5866.jpnprd01.prod.outlook.com
This commit introduces an authentication test for the peer method, as of
a set of scenarios with and without a user name map. The script is
automatically skipped if peer is not supported in the environment where
this test is run, checking this behavior by attempting a connection
first on a cluster up and running.
Author: Bertrand Drouvot
Discussion: https://postgr.es/m/aa60994b-1c66-ca7a-dab9-9a200dbac3d2@amazon.com
Increase likelihood of discovering problems during CI rather the buildfarm by
defining -DRELCACHE_FORCE_RELEASE -DCOPY_PARSE_PLAN_TREES
-DWRITE_READ_PARSE_PLAN_TREES -DRAW_EXPRESSION_COVERAGE_TEST on FreeBSD, and
-DRANDOMIZE_ALLOCATED_MEMORY on macOS.
FreeBSD and macoS are currently not CI bottlenecks, so we can afford to
increase their test times a bit.
Author: Justin Pryzby <pryzbyj@telsasoft.com>
Discussion: https://postgr.es/m/20220910200542.GX31833@telsasoft.com
Test performance regresses noticably when using all cores. This is more
pronounced with meson than with autoconf, presumably because meson will
schedule the "full number" of tests more consistently. 8 seems to work
OK.
Discussion: https://postgr.es/m/20220927040208.l3shfcidovpzqxfh@awork3.anarazel.de
Backpatch: 15-, where CI was introduced
autoconf set PREFIX to /usr/local/pgsql, so using the same default for meson
makes sense. The effect on windows is that installation defaults to installing
to C:/usr/local/pgsql rather than meson's default of C:/, which doesn't seem
perfect, but OK enough.
Signed-off-by: Junwang Zhao <zhjwpku@gmail.com>
Author: Junwang Zhao <zhjwpku@gmail.com>
Discussion: https://postgr.es/CAEG8a3LGWE-gG6vuddmH91RORhi8gWs0mMB-hcTmP3_NVgM7dg@mail.gmail.com
Previously some paths (like c:\ or d:/) worked, but plenty others (like
/path/to or //computer/share/path) didn't. As we'd like to change the default
prefix to /usr/local/pgsql, that's a problem.
Instead of trying to do this in meson.build, call out to the implementation
meson install uses. This isn't pretty, but it's more reliable than what we had
before.
Discussion: https://postgr.es/CAEG8a3LGWE-gG6vuddmH91RORhi8gWs0mMB-hcTmP3_NVgM7dg@mail.gmail.com
Both check_application_name() and check_cluster_name() use
pg_clean_ascii() but didn't release the memory. Depending on when the
GUC is set, this might be cleaned up at some later time or it would
leak postmaster memory once. In any case, it seems better not to have
to rely on such analysis and make the code locally robust. Also, this
makes Valgrind happier.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Jacob Champion <jchampion@timescale.com>
Discussion: https://www.postgresql.org/message-id/CAD21AoBmFNy9MPfA0UUbMubQqH3AaK5U3mrv6pSeWrwCk3LJ8g@mail.gmail.com
I hadn't ported -Wl,--disable-auto-import over from the win32 template as I
had focused on msvc for windows. The flag is desirable as it makes it easier
to find problems one would have with msvc, particularly useful during cross
compilation.
This turned out to be a somewhat happy accident, as it allowed me to realize
that readline actually works on windows these days, as long as auto imports to
enable. Therefore enable auto-import again as part of linking to readline.
We perhaps can come up with a better solution for the readline issue, but this
seems good enough for now.
Discussion: http://postgr.es/m/20220928022724.erzuk5v4ai4b53do@awork3.anarazel.de
Commit 34f581c39 intended to ensure that RelationGetBufferForTuple
would acquire a visibility-map page pin in case the otherBuffer's
all-visible bit had become set since we last had lock on that page.
But I missed a case: when we're extending the relation, VM concerns
were dealt with only in the relatively-less-likely case that we
fail to conditionally lock the otherBuffer. I think I'd believed
that we couldn't need to worry about it if the conditional lock
succeeds, which is true for the target buffer; but the otherBuffer
was unlocked for awhile so its bit might be set anyway. So we need
to do the GetVisibilityMapPins dance, and then also recheck the
page's free space, in both cases.
Per report from Jaime Casanova. Back-patch to v12 as the previous
patch was (although there's still no evidence that the bug is
reachable pre-v14).
Discussion: https://postgr.es/m/E1lWLjP-00006Y-Ml@gemulon.postgresql.org
Currently, PQsslAttributeNames() returns the same list of attribute
names regardless of its conn parameter. This patch changes it to
have behavior parallel to what 80a05679d installed for PQsslAttribute:
you get OpenSSL's attributes if conn is NULL or is an SSL-encrypted
connection, or an empty list if conn is a non-encrypted connection.
The point of this is to have sensible connection-dependent behavior
in case we ever support multiple SSL libraries. The behavior for
NULL can be defined as "the attributes for the default SSL library",
parallel to what PQsslAttribute(NULL, "library") does.
Since this is mostly just future-proofing, no back-patch.
Discussion: https://postgr.es/m/17625-fc47c78b7d71b534@postgresql.org
I (Álvaro) broke tab-completion for GRANT .. ALL TABLES IN SCHEMA while
removing ALL from the publication syntax for schemas in the
aforementioned commit. I also missed to update a bunch of
tab-completion rules for ALTER/CREATE PUBLICATION that match each
individual piece of ALL TABLES IN SCHEMA. Repair those bugs.
While fixing up that commit, update a couple of outdated comments
related to the same change.
Backpatch to 15.
Author: Shi yu <shiy.fnst@fujitsu.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Discussion: https://postgr.es/m/OSZPR01MB6310FCE8609185A56344EED2FD559@OSZPR01MB6310.jpnprd01.prod.outlook.com
The compression parameter to PQsslAttribute has never returned the
compression method used, it has always returned "on" or "off since
it was added in commit 91fa7b4719. Backpatch through v10.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/B9EC60EC-F665-47E8-A221-398C76E382C9@yesql.se
Backpatch-through: v10
The last caller of UnpinBuffer() that did not want to adjust
CurrentResourceOwner was removed in 2d115e4, and nothing has been
introduced in bufmgr.c to do the same thing since. This simplifies 10
code paths.
Author: Aleksander Alekseev
Reviewed-by: Nathan Bossart, Zhang Mingli, Bharath Rupireddy
Discussion: https://postgr.es/m/CAJ7c6TOmmFpb6ohurLhTC7hKNJWGzdwf8s4EAtAZxD48g-e6Jw@mail.gmail.com
It's easy enough to make changes that break on 32bit platforms and few people
test that locally. Add a test for that to CI. LLVM is disabled on 32bit
because installing it would bloat the image size further.
The debian w/ meson task is fast enough that we can afford to test both.
Use the occasion of a separate run of the tests to run them under LANG=C,
we've recently discovered there's not a lot of testing in the buildfarm for
the case.
Discussion: https://postgr.es/m/4033181.1664395633@sss.pgh.pa.us
Commit ebc8b7d44 intended to change the behavior of
PQsslAttribute(NULL, "library"), but accidentally also changed
what happens with a non-NULL conn pointer. Undo that so that
only the intended behavior change happens. Clarify some
associated documentation.
Per bug #17625 from Heath Lord. Back-patch to v15.
Discussion: https://postgr.es/m/17625-fc47c78b7d71b534@postgresql.org
Tom Lane
Andres Freund
David Rowley
Michael Paquier
Bruce Momjian
Peter Eisentraut
Alvaro Herrera
Daniel Gustafsson