reasonable, ie configure and build first, then optionally run regress
tests using new parallel (non-installed) test method, and only then
backup and kill old installation.
it in a separate object. There's no value in keeping the state separate,
and it creates dangling-pointer problems. Also, remove PQsetenv routines
from public API, until and unless they are redesigned to have a safer
interface. Since they were never part of the documented API before 7.0,
it's unlikely that anyone is calling them.
16-Mar-00: trailing + or - is not part of the operator unless the operator
also contains characters not present in SQL92-defined operators. This
solves the 'X=-Y' problem without unduly constraining users' choice of
operator names --- in particular, no existing Postgres operator names
become invalid.
Also, remove processing of // comments, as agreed in the same thread.
after trying to resolve the item as an input-column name. This allows us
to be compliant with the SQL92 spec for queries that fall within the spec,
while still accepting the same out-of-spec queries as 6.5 did. You'll only
lose if there is an output column name that is the same as an input
column name, but doesn't refer to the same value. 7.0 will interpret
such a GROUP BY spec differently than 6.5 did. No way around that, because
6.5 was clearly not spec compliant.
tests for the Foreign Key support in 7.0 which
was made against a CVS copy from this
afternoon.
This modifies
src/test/regress/sql/run_check.tests
src/test/regress/sql/alter_table.sql
src/test/regress/expected/alter_table.out
src/test/regress/sql/foreign_key.sql
src/test/regress/expected/foreign_key.out
sszabo@bigpanda.co
selectivity functions and make the r-tree operators use them. The
estimation functions themselves are just stubs, unfortunately, but
perhaps someday someone will make them compute realistic estimates.
Change pg_am so that the optimizer can reliably tell the difference
between ordered and unordered indexes --- before it would think that
an r-tree index can be scanned in '<<' order, which is not right AFAIK.
Repair broken negator links for network_sup and related ops.
Initdb forced. This might be my last initdb force for 7.0 ... hope so
anyway ...
accesses versus sequential accesses, a (very crude) estimate of the
effects of caching on random page accesses, and cost to evaluate WHERE-
clause expressions. Export critical parameters for this model as SET
variables. Also, create SET variables for the planner's enable flags
(enable_seqscan, enable_indexscan, etc) so that these can be controlled
more conveniently than via PGOPTIONS.
Planner now estimates both startup cost (cost before retrieving
first tuple) and total cost of each path, so it can optimize queries
with LIMIT on a reasonable basis by interpolating between these costs.
Same facility is a win for EXISTS(...) subqueries and some other cases.
Redesign pathkey representation to achieve a major speedup in planning
(I saw as much as 5X on a 10-way join); also minor changes in planner
to reduce memory consumption by recycling discarded Path nodes and
not constructing unnecessary lists.
Minor cleanups to display more-plausible costs in some cases in
EXPLAIN output.
Initdb forced by change in interface to index cost estimation
functions.
The PostgreSQL's to_char() is very compatible with Oracle's to_char
now. I hope that to_char's 3000 rows of source is without bugs, but
will good if anyone test it, for me it works very well :-)
Karel
----------------------------------------------------------------------
Karel Zak <zakkr@zf.jcu.cz> http://home.zf.jcu.cz/~zakkr/
regression tests so I prepared a set of expected
files to make things look OK.
There's also a file to account for minor variations
in the geopmetry output and a resultmap patch to
pull them all together.
With these changes PostgreSQL, from CVS, builds and
regression tests (runcheck) cleanly.
Keith Parks.
Initdb help correction
Changed end/abort to commit/rollback and changed related notices
Commented out way old printing functions in libpq
Fixed a typo in alter table / alter column
SELECT DISTINCT ON (expr [, expr ...]) targetlist ...
and there is a check to make sure that the user didn't specify an ORDER BY
that's incompatible with the DISTINCT operation.
Reimplement nodeUnique and nodeGroup to use the proper datatype-specific
equality function for each column being compared --- they used to do
bitwise comparisons or convert the data to text strings and strcmp().
(To add insult to injury, they'd look up the conversion functions once
for each tuple...) Parse/plan representation of DISTINCT is now a list
of SortClause nodes.
initdb forced by querytree change...
family functions. Contain:
conversion from a datetype to formatted text:
to_char( datetime, text)
to_char( timestamp, text)
to_char( int4, text)
to_char( int8, text)
to_char( float4, text)
to_char( float8, text)
to_char( numeric, text)
vice versa:
to_date ( text, text)
to_datetime ( text, text)
to_timestamp ( text, text)
to_number ( text, text) (convert to numeric)
PostgreSQL to_char is very compatible with Oracle's to_char(), but not
total exactly (now). Small differentions are in number formating. It will
fix in next to_char() version.
! If will this patch aplly to the main tree, must be delete the current
to_char version in contrib (directory "dateformat" and note in contrib's
README), this patch not erase it (sorry Bruce).
The patch patching files:
doc/src/sgml/func.sgml
^^^^^^^^
Hmm, I'm not sure if my English... :( Check it anyone (volunteer)?
Thomas, it is right? SGML is not my primary lang and compile
the current PG docs tree is very happy job (hard variables setting in
docs/sgml/Makefile --> HSTYLE= /home/users/t/thomas/.... :-)
What add any definition to global configure.in and set Makefiles in docs
tree via ./configure?
src/backend/utils/adt/Makefile
src/backend/utils/adt/formatting.c
src/include/catalog/pg_proc.h
src/include/utils/formatting.h
Karel Zak <zakkr@zf.jcu.cz> http://home.zf.jcu.cz/~zakkr/
(ie, WHERE x > lowbound AND x < highbound). It's not very bright yet
but it does something useful. Also, rename intltsel/intgtsel to
scalarltsel/scalargtsel to reflect usage better. Extend convert_to_scalar
to do something a little bit useful with string data types. Still need
to make it do something with date/time datatypes, but I'll wait for
Thomas's datetime unification dust to settle first. Eventually the
routine ought not have any type-specific knowledge at all; it ought to
be calling a type-dependent routine found via a pg_type column; but
that's a task for another day.
pghackers discussion of 5-Jan-2000. The amopselect and amopnpages
estimators are gone, and in their place is a per-AM amcostestimate
procedure (linked to from pg_am, not pg_amop).
- Prevent permissions on indexes
- Instituted --enable-multibyte option and tweaked the MB build process where necessary
- initdb prompts for superuser password
* Let unprivileged users change their own passwords.
* The password is now an Sconst in the parser, which better reflects its text datatype and also
forces users to quote them.
* If your password is NULL you won't be written to the password file, meaning you can't connect
until you have a password set up (if you use password authentication).
* When you drop a user that owns a database you get an error. The database is not gone.
in libpq --- mostly, poor response to error conditions. You now actually
get to see the postmaster's 'The Data Base System is starting up' message,
which you didn't before. I suspect the SSL code is still broken though.
traced this back to what I believe is an error in the sgml file used to
generate this comment, found in pgsql/doc/src/sgml/ref/alter_table.sgml.
Stephen Birch
> > for them to actually set out and do it. Many new users are
> > of the not-so-knowledgable variety, and shell scripting isn't
> > something they want to undertake.
>
> Can someone modify the vacuumdb shell script to do that?
i tried it... it seems to work
neko@kredit.sth.sz
initdb. No more obscure dependencies on environment variables or paths.
It
now finds the templates and the right postgres itself (with cmd line
options as fallback). It also no longer depends on $USER (su safe), and
doesn't advertise that --username allows you to install the db as a
different user, since that doesn't work anyway. Also, recovery and
cleanup
on all errors. Consistent options, clearer documentation.
Please take a look at this and adopt it if you feel it's safe enough. I
have simulated all the stupid circumstances I could think of, but you
never know with shell scripts.
Oh yeah, you can give the postgres user a default password now.
--
Peter Eisentraut Sernanders väg 10:115
triggered
> function now returns the right datatype.
Oops, I got crossed up with Jan's improvements. Ignore this.
--
Peter Eisentraut Sernanders väg 10:115
peter_e@gmx.net 75262 Uppsala
anywhere from zero to two TODO items.
* Allow flag to control COPY input/output of NULLs
I got this:
COPY table .... [ WITH NULL AS 'string' ]
which does what you'd expect. The default is \N, otherwise you can use
empty strings, etc. On Copy In this acts like a filter: every data item
that looks like 'string' becomes a NULL. Pretty straightforward.
This also seems to be related to
* Make postgres user have a password by default
If I recall this discussion correctly, the problem was actually that the
default password for the postgres (or any) user is in fact "\N", because
of the way copy is used. With this change, the file pg_pwd is copied out
with nulls as empty strings, so if someone doesn't have a password, the
password is just '', which one would expect from a new account. I don't
think anyone really wants a hard-coded default password.
Peter Eisentraut Sernanders väg 10:115
* Document/trigger/rule so changes to pg_shadow recreate pg_pwd
I did it with a trigger and it seems to work like a charm. The function
that already updates the file for create and alter user has been made a
built-in "SQL" function and a trigger is created at initdb time.
Comments around the pg_pwd updating function seem to be worried about
this
routine being called concurrently, but I really don't see a reason to
worry about this. Verify for yourself. I guess we never had a system
trigger before, so treat this with care, and feel free to adjust the
nomenclature as well.
--
Peter Eisentraut Sernanders väg 10:115
at all, and because of shell quoting rules this can't be fixed, so I put
in error messages to that end.
Also, calling create or drop database in a transaction block is not so
good either, because the file system mysteriously refuses to roll back rm
calls on transaction aborts. :) So I put in checks to see if a transaction
is in progress and signal an error.
Also I put the whole call in a transaction of its own to be able to roll
back changes to pg_database in case the file system operations fail.
The alternative location issues I posted recently were untouched, awaiting
the outcome of that discussion. Other than that, this should be much more
fool-proof now.
The docs I cleaned up as well.
Peter Eisentraut Sernanders väg 10:115
against the sources from one hour ago and contain all the portable and
up
to date stuff.
A few other CVS "householding" things you might want to take care of:
* Remove the src/bin/cleardbdir directory
* Remove the file src/bin/psql/sql_help.h from the repository, as it is
a derived file and is build by the release_prep.
Peter Eisentraut
them into the scripts dir. I also added a --list option to show already
installed languages.
This whole moving and renaming totally confused CVS and my checked out
copy got completely fried last night. When you apply the source patch,
please make sure that all the directories src/bin/{create|destroy}* as
well as vacuumdb, cleardbdir are gone and that all the scripts (7) are
in
scripts/.
Meanwhile I am still puzzled about what happened with the docs patch.
Because I don't know what you got now, the second attachment contains
the
files
ref/allfiles.sgml
ref/commands.sgml
ref/createlang.sgml
ref/droplang.sgml
doc/src/sgml/Makefile
Peter Eisentraut Sernanders väg 10:115
This one should work much better than the one I sent in previously. The
functionality is the same, but the patch was missing one file resulting
in
the compilation failing. The docs also received a minor fix.
Peter Eisentraut Sernanders väg 10:115
PQconnectStart
PQconnectPoll
PQresetStart
PQresetPoll
PQsetenvStart
PQsetenvPoll
PQsetenvAbort
and brings into the published interface
PQsetenv.
The first four are asynchronous analogues of PQconnectdb and PQreset -
they allow an application to connect to the DB without blocking on
remote I/O.
The PQsetenv functions perform an environment negotiation with the
server.
Internal to libpq, pqReadReady and pqWriteReady have been made available
across the library (they were previously static functions inside
fe-misc.c). A lot of internal rearrangement has been necessary to
support these changes.
The API documentation has been updated also.
Caveats:
o The Windows code does not default to using non-blocking sockets,
since I have no documentation: Define WIN32_NON_BLOCKING_CONNECTIONS to
do that.
o The SSL code still blocks.
Ewan Mellor.
rate
it's better than what used to be there.
* Does proper SQL "host variable" substitution as pointed out by Andreas
Zeugwetter (thanks): select * from :foo; Also some changes in how ':'
and ';' are treated (escape with \ to send to backend). This does
_not_
affect the '::' cast operator, but perhaps others that contain : or ;
(but there are none right now).
* To show description with a <something> listing, append '?' to command
name, e.g., \df?. This seemed to be the convenient and logical
solution.
Or append a '+' to see more useless information, e.g., \df+.
* Fixed fflush()'ing bug pointed out by Jan during the regression test
discussion.
* Added LastOid variable. This ought to take care of TODO item "Add a
function to return the last inserted oid, for use in psql scripts"
(under CLIENTS)
E.g.,
insert into foo values(...);
insert into bar values(..., :LastOid);
\echo $LastOid
* \d command shows constraints, rules, and triggers defined on the table
(in addition to indices)
* Various fixes, optimizations, corrections
* Documentation update as well
Note: This now requires snprintf(), which, if necessary, is taken from
src/backend/port. This is certainly a little weird, but it should
suffice
until a source tree cleanup is done.
Enjoy.
--
Peter Eisentraut Sernanders väg 10:115
Make all system indexes unique.
Make all cache loads use system indexes.
Rename *rel to *relid in inheritance tables.
Rename cache names to be clearer.
Thomas G. Lockhart
Tom Lane
Bruce Momjian
Peter Eisentraut
Tatsuo Ishii
Michael Meskes