XID) in checkpoint records. This eliminates the need to recompute the value
from scratch during database startup, which is one of the two remaining
reasons for the flatfile code to exist. It should also simplify life for
hot-standby operation.
To avoid bloating the checkpoint records unreasonably, I switched from
tracking the oldest database by name to tracking it by OID. This turns
out to save cycles in general (everywhere but the warning-generating
paths, which we hardly care about) and also helps us deal with the case
that the oldest database got dropped instead of being vacuumed. The prior
coding might go for a long time without updating the wrap limit in that case,
which is bad because it might result in a lot of useless autovacuum activity.
documentation warnings against setting it nonzero unless active use of
prepared transactions is intended and a suitable transaction manager has been
installed. This should help to prevent the type of scenario we've seen
several times now where a prepared transaction is forgotten and eventually
causes severe maintenance problems (or even anti-wraparound shutdown).
The only real reason we had the default be nonzero in the first place was to
support regression testing of the feature. To still be able to do that,
tweak pg_regress to force a nonzero value during "make check". Since we
cannot force a nonzero value in "make installcheck", add a variant regression
test "expected" file that shows the results that will be obtained when
max_prepared_transactions is zero.
Also, extend the HINT messages for transaction wraparound warnings to mention
the possibility that old prepared transactions are causing the problem.
All per today's discussion.
vacuuming (it's not), say "database-wide VACUUM" instead of "full-database
VACUUM" in the relevant hint messages. Also, document the permissions needed
to do this. Per today's discussion.
ReadNewTransactionId from GetSnapshotData --- with a "latestCompletedXid"
variable that is updated during transaction commit or abort. Since
latestCompletedXid is written only in places that had to lock ProcArrayLock
exclusively anyway, and is read only in places that had to lock ProcArrayLock
shared anyway, it adds no new locking requirements to the system despite being
cluster-wide. Moreover, removing ReadNewTransactionId from snapshot
acquisition eliminates the need to take both XidGenLock and ProcArrayLock at
the same time. Since XidGenLock is sometimes held across I/O this can be a
significant win. Some preliminary benchmarking suggested that this patch has
no effect on average throughput but can significantly improve the worst-case
transaction times seen in pgbench. Concept by Florian Pflug, implementation
by Tom Lane.
continuously, and requests vacuum runs of "autovacuum workers" to postmaster.
The workers do the actual vacuum work. This allows for future improvements,
like allowing multiple autovacuum jobs running in parallel.
For now, the code keeps the original behavior of having a single autovac
process at any time by sleeping until the previous worker has finished.
in PITR scenarios. We now WAL-log the replacement of old XIDs with
FrozenTransactionId, so that such replacement is guaranteed to propagate to
PITR slave databases. Also, rather than relying on hint-bit updates to be
preserved, pg_clog is not truncated until all instances of an XID are known to
have been replaced by FrozenTransactionId. Add new GUC variables and
pg_autovacuum columns to allow management of the freezing policy, so that
users can trade off the size of pg_clog against the amount of freezing work
done. Revise the already-existing code that forces autovacuum of tables
approaching the wraparound point to make it more bulletproof; also, revise the
autovacuum logic so that anti-wraparound vacuuming is done per-table rather
than per-database. initdb forced because of changes in pg_class, pg_database,
and pg_autovacuum catalogs. Heikki Linnakangas, Simon Riggs, and Tom Lane.
PGPROC array into snapshots, and use this information to avoid visits
to pg_subtrans in HeapTupleSatisfiesSnapshot. This appears to solve
the pg_subtrans-related context swap storm problem that's been reported
by several people for 8.1. While at it, modify GetSnapshotData to not
take an exclusive lock on ProcArrayLock, as closer analysis shows that
shared lock is always sufficient.
Itagaki Takahiro and Tom Lane
To this end, add a couple of columns to pg_class, relminxid and relvacuumxid,
based on which we calculate the pg_database columns after each vacuum.
We now force all databases to be vacuumed, even template ones. A backend
noticing too old a database (meaning pg_database.datminxid is in danger of
falling behind Xid wraparound) will signal the postmaster, which in turn will
start an autovacuum iteration to process the offending database. In principle
this is only there to cope with frozen (non-connectable) databases without
forcing users to set them to connectable, but it could force regular user
database to go through a database-wide vacuum at any time. Maybe we should
warn users about this somehow. Of course the real solution will be to use
autovacuum all the time ;-)
There are some additional improvements we could have in this area: for example
the vacuum code could be smarter about not updating pg_database for each table
when called by autovacuum, and do it only once the whole autovacuum iteration
is done.
I updated the system catalogs documentation, but I didn't modify the
maintenance section. Also having some regression tests for this would be nice
but it's not really a very straightforward thing to do.
Catalog version bumped due to system catalog changes.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
not accepting queries).
errmsg("database is not accepting queries to avoid
wraparound data loss in database \"%s\"",
errhint("Stop the postmaster and use a standalone
backend to VACUUM database \"%s\".",
whenever we generate a new OID. This prevents occasional duplicate-OID
errors that can otherwise occur once the OID counter has wrapped around.
Duplicate relfilenode values are also checked for when creating new
physical files. Per my recent proposal.
communication structure, and make it its own module with its own lock.
This should reduce contention at least a little, and it definitely makes
the code seem cleaner. Per my recent proposal.
avoid encroaching on the 'user' range of OIDs by allowing automatic
OID assignment to use values below 16k until we reach normal operation.
initdb not forced since this doesn't make any incompatible change;
however a lot of stuff will have different OIDs after your next initdb.
the AMI_OVERRIDE flag. The fact that TransactionLogFetch treats
BootstrapTransactionId as always committed is sufficient to make
bootstrap work, and getting rid of extra tests in heavily used code
paths seems like a win. The files produced by initdb are demonstrably
the same after this change.
in GetNewTransactionId(). Since the limit value has to be computed
before we run any real transactions, this requires adding code to database
startup to scan pg_database and determine the oldest datfrozenxid.
This can conveniently be combined with the first stage of an attack on
the problem that the 'flat file' copies of pg_shadow and pg_group are
not properly updated during WAL recovery. The code I've added to
startup resides in a new file src/backend/utils/init/flatfiles.c, and
it is responsible for rewriting the flat files as well as initializing
the XID wraparound limit value. This will eventually allow us to get
rid of GetRawDatabaseInfo too, but we'll need an initdb so we can add
a trigger to pg_database.
number of active subtransaction XIDs in each backend's PGPROC entry,
and use this to avoid expensive probes into pg_subtrans during
TransactionIdIsInProgress. Extend EOXactCallback API to allow add-on
modules to get control at subxact start/end. (This is deliberately
not compatible with the former API, since any uses of that API probably
need manual review anyway.) Add basic reference documentation for
SAVEPOINT and related commands. Minor other cleanups to check off some
of the open issues for subtransactions.
Alvaro Herrera and Tom Lane.
performance front, but with feature freeze upon us I think it's time to
drive a stake in the ground and say that this will be in 7.5.
Alvaro Herrera, with some help from Tom Lane.
complete ExtendCLOG() before advancing nextXid, so that if that routine
fails, the next incoming transaction will try it again. Per trouble
report from Christopher Kings-Lynne.
pointer type when it is not necessary to do so.
For future reference, casting NULL to a pointer type is only necessary
when (a) invoking a function AND either (b) the function has no prototype
OR (c) the function is a varargs function.
> Changes to avoid collisions with WIN32 & MFC names...
> 1. Renamed:
> a. PROC => PGPROC
> b. GetUserName() => GetUserNameFromId()
> c. GetCurrentTime() => GetCurrentDateTime()
> d. IGNORE => IGNORE_DTF in include/utils/datetime.h & utils/adt/datetim
>
> 2. Added _P to some lex/yacc tokens:
> CONST, CHAR, DELETE, FLOAT, GROUP, IN, OUT
Jan
existing lock manager and spinlocks: it understands exclusive vs shared
lock but has few other fancy features. Replace most uses of spinlocks
with lightweight locks. All remaining uses of spinlocks have very short
lock hold times (a few dozen instructions), so tweak spinlock backoff
code to work efficiently given this assumption. All per my proposal on
pghackers 26-Sep-01.
buffer manager with 'pg_clog', a specialized access method modeled
on pg_xlog. This simplifies startup (don't need to play games to
open pg_log; among other things, OverrideTransactionSystem goes away),
should improve performance a little, and opens the door to recycling
commit log space by removing no-longer-needed segments of the commit
log. Actual recycling is not there yet, but I felt I should commit
this part separately since it'd still be useful if we chose not to
do transaction ID wraparound.
default, but OIDS are removed from many system catalogs that don't need them.
Some interesting side effects: TOAST pointers are 20 bytes not 32 now;
pg_description has a three-column key instead of one.
Bugs fixed in passing: BINARY cursors work again; pg_class.relhaspkey
has some usefulness; pg_dump dumps comments on indexes, rules, and
triggers in a valid order.
initdb forced.
in GetSnapshotData, GetNewTransactionId, CommitTransaction, AbortTransaction,
etc. Correct race condition in transaction status testing in
HeapTupleSatisfiesVacuum --- this wasn't important for old VACUUM with
exclusive lock on its table, but it sure is important now. All per
pghackers discussion 7/11/01 and 7/12/01.
validity checking rules for VACUUM. Make some other rearrangements of the
VACUUM code to allow more code to be shared between full and lazy VACUUM.
Minor code cleanups and added comments for TransactionId manipulations.
Python) to support shared extension modules, I have learned that Guido
prefers the style of the attached patch to solve the above problem.
I feel that this solution is particularly appropriate in this case
because the following:
PglargeType
PgType
PgQueryType
are already being handled in the way that I am proposing for PgSourceType.
Jason Tishler
* Store two past checkpoint locations, not just one, in pg_control.
On startup, we fall back to the older checkpoint if the newer one
is unreadable. Also, a physical copy of the newest checkpoint record
is kept in pg_control for possible use in disaster recovery (ie,
complete loss of pg_xlog). Also add a version number for pg_control
itself. Remove archdir from pg_control; it ought to be a GUC
parameter, not a special case (not that it's implemented yet anyway).
* Suppress successive checkpoint records when nothing has been entered
in the WAL log since the last one. This is not so much to avoid I/O
as to make it actually useful to keep track of the last two
checkpoints. If the things are right next to each other then there's
not a lot of redundancy gained...
* Change CRC scheme to a true 64-bit CRC, not a pair of 32-bit CRCs
on alternate bytes. Polynomial borrowed from ECMA DLT1 standard.
* Fix XLOG record length handling so that it will work at BLCKSZ = 32k.
* Change XID allocation to work more like OID allocation. (This is of
dubious necessity, but I think it's a good idea anyway.)
* Fix a number of minor bugs, such as off-by-one logic for XLOG file
wraparound at the 4 gig mark.
* Add documentation and clean up some coding infelicities; move file
format declarations out to include files where planned contrib
utilities can get at them.
* Checkpoint will now occur every CHECKPOINT_SEGMENTS log segments or
every CHECKPOINT_TIMEOUT seconds, whichever comes first. It is also
possible to force a checkpoint by sending SIGUSR1 to the postmaster
(undocumented feature...)
* Defend against kill -9 postmaster by storing shmem block's key and ID
in postmaster.pid lockfile, and checking at startup to ensure that no
processes are still connected to old shmem block (if it still exists).
* Switch backends to accept SIGQUIT rather than SIGUSR1 for emergency
stop, for symmetry with postmaster and xlog utilities. Clean up signal
handling in bootstrap.c so that xlog utilities launched by postmaster
will react to signals better.
* Standalone bootstrap now grabs lockfile in target directory, as added
insurance against running it in parallel with live postmaster.
Tom Lane
Bruce Momjian
Alvaro Herrera
Peter Eisentraut
Neil Conway
PostgreSQL Daemon
Jan Wieck