GetVirtualXIDsDelayingChkpt calls palloc, which isn't safe in a critical
section. I thought I covered this case with the exemption for the
checkpointer, but CreateCheckPoint is also called from the startup process.
If you compile with WAL_DEBUG and enable it with wal_debug=on, we used to
only pass the first XLogRecData entry to the rm_desc routine. I think the
original assumprion was that the first XLogRecData entry contains all the
necessary information for the rm_desc routine, but that's a pretty shaky
assumption. At least standby_redo didn't get the memo.
To fix, piece together all the data in a temporary buffer, and pass that to
the rm_desc routine.
It's been like this forever, but the patch didn't apply cleanly to
back-branches. Probably wouldn't be hard to fix the conflicts, but it's
not worth the trouble.
The special feature the XLogInsert slots had over regular LWLocks is the
insertingAt value that was updated atomically with releasing backends
waiting on it. Add new functions to the LWLock API to do that, and replace
the slots with LWLocks. This reduces the amount of duplicated code.
(There's still some duplication, but at least it's all in lwlock.c now.)
Reviewed by Andres Freund.
It is no longer used, none of the resource managers have multi-record
actions that would make it unsafe to perform a restartpoint.
Also don't allow rm_cleanup to write WAL records, it's also no longer
required. Move the call to rm_cleanup routines to make it more symmetric
with rm_startup.
When a row is updated, and the new tuple version is put on the same page as
the old one, only WAL-log the part of the new tuple that's not identical to
the old. This saves significantly on the amount of WAL that needs to be
written, in the common case that most fields are not modified.
Amit Kapila, with a lot of back and forth with me, Robert Haas, and others.
CheckRequiredParameterValues() should perform the checks if archive recovery
was requested, even if we are going to perform crash recovery first.
Reported by Kyotaro HORIGUCHI. Backpatch to 9.2, like the crash-then-archive
recovery mode.
When entering crash recovery followed by archive recovery, and the latest
checkpoint is a shutdown checkpoint, and there are no more WAL records to
replay before transitioning from crash to archive recovery, we would not
immediately allow read-only connections in hot standby mode even if we
could. That's because when starting from a shutdown checkpoint, we set
lastReplayedEndRecPtr incorrectly to the record before the checkpoint
record, instead of the checkpoint record itself. We don't run the redo
routine of the shutdown checkpoint record, but starting recovery from it
goes through the same motions, so it should be considered as replayed.
Reported by Kyotaro HORIGUCHI. All versions with hot standby are affected,
so backpatch to 9.0.
This feature, building on previous commits, allows the write-ahead log
stream to be decoded into a series of logical changes; that is,
inserts, updates, and deletes and the transactions which contain them.
It is capable of handling decoding even across changes to the schema
of the effected tables. The output format is controlled by a
so-called "output plugin"; an example is included. To make use of
this in a real replication system, the output plugin will need to be
modified to produce output in the format appropriate to that system,
and to perform filtering.
Currently, information can be extracted from the logical decoding
system only via SQL; future commits will add the ability to stream
changes via walsender.
Andres Freund, with review and other contributions from many other
people, including Álvaro Herrera, Abhijit Menon-Sen, Peter Gheogegan,
Kevin Grittner, Robert Haas, Heikki Linnakangas, Fujii Masao, Abhijit
Menon-Sen, Michael Paquier, Simon Riggs, Craig Ringer, and Steve
Singer.
Commit abf5c5c9a4 added a bogus while-
statement after the for(;;)-loop. It went unnoticed in testing, because
it was dead code.
Report by KONDO Mitsumasa. Backpatch to 9.3. The commit that introduced
this was also applied to 9.2, but not the bogus while-loop part, because
the code in 9.2 looks quite different.
Coverity identified a number of places in which it couldn't prove that a
string being copied into a fixed-size buffer would fit. We believe that
most, perhaps all of these are in fact safe, or are copying data that is
coming from a trusted source so that any overrun is not really a security
issue. Nonetheless it seems prudent to forestall any risk by using
strlcpy() and similar functions.
Fixes by Peter Eisentraut and Jozef Mlich based on Coverity reports.
In addition, fix a potential null-pointer-dereference crash in
contrib/chkpass. The crypt(3) function is defined to return NULL on
failure, but chkpass.c didn't check for that before using the result.
The main practical case in which this could be an issue is if libc is
configured to refuse to execute unapproved hashing algorithms (e.g.,
"FIPS mode"). This ideally should've been a separate commit, but
since it touches code adjacent to one of the buffer overrun changes,
I included it in this commit to avoid last-minute merge issues.
This issue was reported by Honza Horak.
Security: CVE-2014-0065 for buffer overruns, CVE-2014-0066 for crypt()
If there is a WAL segment with same ID but different TLI present in both
the WAL archive and pg_xlog, prefer the one with higher TLI. Before this
patch, the archive was polled first, for all expected TLIs, and only if no
file was found was pg_xlog scanned. This was a change in behavior from 9.3,
which first scanned archive and pg_xlog for the highest TLI, then archive
and pg_xlog for the next highest TLI and so forth. This patch reverts the
behavior back to what it was in 9.2.
The reason for this is that if for example you try to do archive recovery
to timeline 2, which branched off timeline 1, but the WAL for timeline 2 is
not archived yet, we would replay past the timeline switch point on
timeline 1 using the archived files, before even looking timeline 2's files
in pg_xlog
Report and patch by Kyotaro Horiguchi. Backpatch to 9.3 where the behavior
was changed.
WakeupWaiters() is supposed to wake up all LW_WAIT_UNTIL_FREE waiters of
the slot, but the loop incorrectly also woke up the first LW_EXCLUSIVE
waiter, if there was no LW_WAIT_UNTIL_FREE waiters in the queue.
Noted by Andres Freund. This code is new in 9.4, so no backpatching.
Replication slots are a crash-safe data structure which can be created
on either a master or a standby to prevent premature removal of
write-ahead log segments needed by a standby, as well as (with
hot_standby_feedback=on) pruning of tuples whose removal would cause
replication conflicts. Slots have some advantages over existing
techniques, as explained in the documentation.
In a few places, we refer to the type of replication slots introduced
by this patch as "physical" slots, because forthcoming patches for
logical decoding will also have slots, but with somewhat different
properties.
Andres Freund and Robert Haas
This allows ending recovery as a consistent state has been reached. Without
this, there was no easy way to e.g restore an online backup, without
replaying any extra WAL after the backup ended.
MauMau and me.
Since C99, it's been standard for printf and friends to accept a "z" size
modifier, meaning "whatever size size_t has". Up to now we've generally
dealt with printing size_t values by explicitly casting them to unsigned
long and using the "l" modifier; but this is really the wrong thing on
platforms where pointers are wider than longs (such as Win64). So let's
start using "z" instead. To ensure we can do that on all platforms, teach
src/port/snprintf.c to understand "z", and add a configure test to force
use of that implementation when the platform's version doesn't handle "z".
Having done that, modify a bunch of places that were using the
unsigned-long hack to use "z" instead. This patch doesn't pretend to have
gotten everyplace that could benefit, but it catches many of them. I made
an effort in particular to ensure that all uses of the same error message
text were updated together, so as not to increase the number of
translatable strings.
It's possible that this change will result in format-string warnings from
pre-C99 compilers. We might have to reconsider if there are any popular
compilers that will warn about this; but let's start by seeing what the
buildfarm thinks.
Andres Freund, with a little additional work by me
In ordinary operation, VACUUM must be careful to take a cleanup lock on
each leaf page of a btree index; this ensures that no indexscans could
still be "in flight" to heap tuples due to be deleted. (Because of
possible index-tuple motion due to concurrent page splits, it's not enough
to lock only the pages we're deleting index tuples from.) In Hot Standby,
the WAL replay process must likewise lock every leaf page. There were
several bugs in the code for that:
* The replay scan might come across unused, all-zero pages in the index.
While btree_xlog_vacuum itself did the right thing (ie, nothing) with
such pages, xlogutils.c supposed that such pages must be corrupt and
would throw an error. This accounts for various reports of replication
failures with "PANIC: WAL contains references to invalid pages". To
fix, add a ReadBufferMode value that instructs XLogReadBufferExtended
not to complain when we're doing this.
* btree_xlog_vacuum performed the extra locking if standbyState ==
STANDBY_SNAPSHOT_READY, but that's not the correct test: we won't open up
for hot standby queries until the database has reached consistency, and
we don't want to do the extra locking till then either, for fear of reading
corrupted pages (which bufmgr.c would complain about). Fix by exporting a
new function from xlog.c that will report whether we're actually in hot
standby replay mode.
* To ensure full coverage of the index in the replay scan, btvacuumscan
would emit a dummy WAL record for the last page of the index, if no
vacuuming work had been done on that page. However, if the last page
of the index is all-zero, that would result in corruption of said page,
since the functions called on it weren't prepared to handle that case.
There's no need to lock any such pages, so change the logic to target
the last normal leaf page instead.
The first two of these bugs were diagnosed by Andres Freund, the other one
by me. Fixes based on ideas from Heikki Linnakangas and myself.
This has been wrong since Hot Standby was introduced, so back-patch to 9.0.
Makes the replay loop slightly more readable, by separating the concerns of
whether to stop and whether to delay, and how to extract the timestamp from
a record.
This has the user-visible change that the timestamp of the last applied
record is now updated after actually applying it. Before, it was updated
just before applying it. That meant that pg_last_xact_replay_timestamp()
could return the timestamp of a commit record that is in process of being
replayed, but not yet applied. Normally the difference is small, but if
min_recovery_apply_delay is set, there could be a significant delay between
reading a record and applying it.
Another behavioral change is that if you recover to a restore point, we stop
after the restore point record, not before it. It makes no difference as far
as running queries on the server is concerned, as applying a restore point
record changes nothing, but if examine the timeline history you will see
that the new timeline branched off just after the restore point record, not
before it. One practical consequence is that if you do PITR to the new
timeline, and set recovery target to the same named restore point again, it
will find and stop recovery at the same restore point. Conceptually, I think
it makes more sense to consider the restore point as part of the new
timeline's history than not.
In principle, setting the last-replayed timestamp before actually applying
the record was a bug all along, but it doesn't seem worth the risk to
backpatch, since min_recovery_apply_delay was only added in 9.4.
If pause_at_recovery_target is set, recovery pauses *before* applying the
target record, even if recovery_target_inclusive is set. If you then
continue with pg_xlog_replay_resume(), it will apply the target record
before ending recovery. In other words, if you log in while it's paused
and verify that the database looks OK, ending recovery changes its state
again, possibly destroying data that you were tring to salvage with PITR.
Backpatch to 9.1, this has been broken since pause_at_recovery_target was
added.
The docs say that only one of recovery_target_xid, recovery_target_time, or
recovery_target_name can be specified. But the code actually did something
different, so that a name overrode time, and xid overrode both time and name.
Now the target specified last takes effect, whether it's an xid, time or
name.
With this patch, we still accept multiple recovery_target settings, even
though docs say that only one can be specified. It's a general property of
the recovery.conf file parser that you if you specify the same option twice,
the last one takes effect, like with postgresql.conf.
When starting WAL replay from an online checkpoint, the last replayed WAL
record variable was initialized using the checkpoint record's location, even
though the records between the REDO location and the checkpoint record had
not been replayed yet. That was noted as "slightly confusing" but harmless
in the comment, but in some cases, it fooled CheckRecoveryConsistency to
incorrectly conclude that we had already reached a consistent state
immediately at the beginning of WAL replay. That caused the system to accept
read-only connections in hot standby mode too early, and also PANICs with
message "WAL contains references to invalid pages".
Fix by initializing the variables to the REDO location instead.
In 9.2 and above, change CheckRecoveryConsistency() to use
lastReplayedEndRecPtr variable when checking if backup end location has
been reached. It was inconsistently using EndRecPtr for that check, but
lastReplayedEndRecPtr when checking min recovery point. It made no
difference before this patch, because in all the places where
CheckRecoveryConsistency was called the two variables were the same, but
it was always an accident waiting to happen, and would have been wrong
after this patch anyway.
Report and analysis by Tomonari Katsumata, bug #8686. Backpatch to 9.0,
where hot standby was introduced.
And the same for do_pg_stop_backup. The code in do_pg_* is not allowed
to access the catalogs. For manual base backups, the permissions
check can be handled in the calling function, and for streaming
base backups only users with the required permissions can get past
the authentication step in the first place.
Reported by Antonin Houska, diagnosed by Andres Freund
WAL records of hint bit updates is useful to tools that want to examine
which pages have been modified. In particular, this is required to make
the pg_rewind tool safe (without checksums).
This can also be used to test how much extra WAL-logging would occur if
you enabled checksums, without actually enabling them (which you can't
currently do without re-initdb'ing).
Sawada Masahiko, docs by Samrat Revagade. Reviewed by Dilip Kumar, with
further changes by me.
Set min_recovery_apply_delay to force a delay in recovery apply for commit and
restore point WAL records. Other records are replayed immediately. Delay is
measured between WAL record time and local standby time.
Robert Haas, Fabrízio de Royes Mello and Simon Riggs
Detailed review by Mitsumasa Kondo
When wal_level=logical, we'll log columns from the old tuple as
configured by the REPLICA IDENTITY facility added in commit
07cacba983. This makes it possible
a properly-configured logical replication solution to correctly
follow table updates even if they change the chosen key columns,
or, with REPLICA IDENTITY FULL, even if the table has no key at
all. Note that updates which do not modify the replica identity
column won't log anything extra, making the choice of a good key
(i.e. one that will rarely be changed) important to performance
when wal_level=logical is configured.
Each insert, update, or delete to a catalog table will also log
the CMIN and/or CMAX values of stamped by the current transaction.
This is necessary because logical decoding will require access to
historical snapshots of the catalog in order to decode some data
types, and the CMIN/CMAX values that we may need in order to judge
row visibility may have been overwritten by the time we need them.
Andres Freund, reviewed in various versions by myself, Heikki
Linnakangas, KONDO Mitsumasa, and many others.
Commit 9dc842f08 of 8.2 era prevented MultiXact truncation during crash
recovery, because there was no guarantee that enough state had been
setup, and because it wasn't deemed to be a good idea to remove data
during crash recovery anyway. Since then, due to Hot-Standby, streaming
replication and PITR, the amount of time a cluster can spend doing crash
recovery has increased significantly, to the point that a cluster may
even never come out of it. This has made not truncating the content of
pg_multixact/ not defensible anymore.
To fix, take care to setup enough state for multixact truncation before
crash recovery starts (easy since checkpoints contain the required
information), and move the current end-of-recovery actions to a new
TrimMultiXact() function, analogous to TrimCLOG().
At some later point, this should probably done similarly to the way
clog.c is doing it, which is to just WAL log truncations, but we can't
do that for the back branches.
Back-patch to 9.0. 8.4 also has the problem, but since there's no hot
standby there, it's much less pressing. In 9.2 and earlier, this patch
is simpler than in newer branches, because multixact access during
recovery isn't required. Add appropriate checks to make sure that's not
happening.
Andres Freund
RecoveryIsInProgress() can be called very frequently. During normal
operation, it just checks a backend-local variable and returns quickly,
but during hot standby, it checks a spinlock-protected shared variable.
Those spinlock acquisitions can become a point of contention on a busy
hot standby system.
Replace the spinlock acquisition with a memory barrier.
Per discussion with Andres Freund, Ants Aasma and Merlin Moncure.
The TYPEALIGN macro, and the related ones like MAXALIGN, don't work with
values larger than intptr_t, because TYPEALIGN casts the argument to
intptr_t to do the arithmetic. That's not a problem when dealing with
pointers or lengths or offsets related to pointers, but the XLogInsert
scaling patch added a call to MAXALIGN with an XLogRecPtr argument.
To fix, add wider variants of the macros, called TYPEALIGN64 and MAXALIGN64,
which are just like the existing variants but work with uint64 instead of
intptr_t.
Report and patch by David Rowley, analysis by Andres Freund.
This reverts commit 269e780822
and commit 5b571bb8c8.
Unfortunately, the initial patch had insufficient performance testing,
and resulted in a regression.
Per report by Thom Brown.
Performance testing shows that if the insertpos_lck spinlock and the fields
that it protects are on the same cache line with other variables that are
frequently accessed, the false sharing can hurt performance a lot. Keep
them apart by adding some padding.
This keeps the usual trigger file name unchanged from 9.2, avoiding nasty
issues if you use a pre-9.3 pg_ctl binary with a 9.3 server or vice versa.
The fallback behavior of creating a full checkpoint before starting up is now
triggered by a file called "fallback_promote". That can be useful for
debugging purposes, but we don't expect any users to have to resort to that
and we might want to remove that in the future, which is why the fallback
mechanism is undocumented.
Initialization of the first XLOG buffer at end-of-recovery was broken for
the case that the last read WAL record ended at a page boundary. Instead of
trying to copy the last full xlog page to the buffer cache in that case,
just set shared state so that the next page is initialized when the first
WAL record after startup is inserted. (that's what we did in earlier
version, too)
To make the shared state required for that case less surprising, replace the
XLogCtl->curridx variable, which was the index of the latest initialized
buffer, with an XLogRecPtr of how far the buffers have been initialized.
That also allows us to get rid of the XLogRecEndPtrToBufIdx macro.
While we're at it, make a similar change for XLogCtl->Write.curridx, getting
rid of that variable and calculating the next buffer to write from
XLogCtl->LogwrtResult instead.
Was broken by my xloginsert scaling patch. XLogCtl global variable needs
to be initialized in each process, as it's not inherited by fork() on
Windows.
This patch replaces WALInsertLock with a number of WAL insertion slots,
allowing multiple backends to insert WAL records to the WAL buffers
concurrently. This is particularly useful for parallel loading large amounts
of data on a system with many CPUs.
This has one user-visible change: switching to a new WAL segment with
pg_switch_xlog() now fills the remaining unused portion of the segment with
zeros. This potentially adds some overhead, but it has been a very common
practice by DBA's to clear the "tail" of the segment with an external
pg_clearxlogtail utility anyway, to make the WAL files compress better.
With this patch, it's no longer necessary to do that.
This patch adds a new GUC, xloginsert_slots, to tune the number of WAL
insertion slots. Performance testing suggests that the default, 8, works
pretty well for all kinds of worklods, but I left the GUC in place to allow
others with different hardware to test that easily. We might want to remove
that before release.
Reviewed by Andres Freund.
Robert Haas
Heikki Linnakangas
Fujii Masao
Bruce Momjian
Tom Lane
Magnus Hagander
Simon Riggs
Alvaro Herrera
Jeff Davis
Peter Eisentraut