When a Gather or Gather Merge node is started and stopped multiple
times, accumulate instrumentation data only once, at the end, instead
of after each execution, to avoid recording inflated totals.
Commit 778e78ae9f, the previous attempt
at a fix, instead reset the state after every execution, which worked
for the general instrumentation data but had problems for the additional
instrumentation specific to Sort and Hash nodes.
Report by hubert depesz lubaczewski. Analysis and fix by Amit Kapila,
following a design proposal from Thomas Munro, with a comment tweak
by me.
Discussion: http://postgr.es/m/20171127175631.GA405@depesz.com
es_query_dsa turns out to be broken by design, because it supposes
that there is only one DSA for the whole query, whereas there is
actually one per Gather (Merge) node. For now, work around that
problem by setting and clearing the pointer around the sections of
code that might need it. It's probably a better idea to get rid of
es_query_dsa altogether in favor of having each node keep track
individually of which DSA is relevant, but that seems like more than
we would want to back-patch.
Thomas Munro, reviewed and tested by Andreas Seltenreich, Amit
Kapila, and by me.
Discussion: http://postgr.es/m/CAEepm=1U6as=brnVvMNixEV2tpi8NuyQoTmO8Qef0-VV+=7MDA@mail.gmail.com
In order for executor nodes to be able to change their ExecProcNode function
after ExecInitNode() has finished, provide ExecSetExecProcNode(). This allows
any wrappers functions that only execProcnode.c knows about to be reinstalled.
The motivation for wanting to change ExecProcNode after ExecInitNode() has
finished is that it is not known until later whether parallel query is
available, so if a parallel variant is to be installed then ExecInitNode()
is too soon to decide.
Author: Thomas Munro
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=09rr65VN+cAV5FgyM_z=D77Xy8Fuc9CDDDYbq3pQUezg@mail.gmail.com
I noticed that _SPI_execute_plan initially sets spierrcontext.arg = NULL,
and only fills it in some time later. If an error were to happen in
between, _SPI_error_callback would try to dereference the null pointer.
This is unlikely --- there's not much between those points except
push-snapshot calls --- but it's clearly not impossible. Tweak the
callback to do nothing if the pointer isn't set yet.
It's been like this for awhile, so back-patch to all supported branches.
When we create an Append node, we can spread out the workers over the
subplans instead of piling on to each subplan one at a time, which
should typically be a bit more efficient, both because the startup
cost of any plan executed entirely by one worker is paid only once and
also because of reduced contention. We can also construct Append
plans using a mix of partial and non-partial subplans, which may allow
for parallelism in places that otherwise couldn't support it.
Unfortunately, this patch doesn't handle the important case of
parallelizing UNION ALL by running each branch in a separate worker;
the executor infrastructure is added here, but more planner work is
needed.
Amit Khandekar, Robert Haas, Amul Sul, reviewed and tested by
Ashutosh Bapat, Amit Langote, Rafia Sabih, Amit Kapila, and
Rajkumar Raghuwanshi.
Discussion: http://postgr.es/m/CAJ3gD9dy0K_E8r727heqXoBmWZ83HwLFwdcaSSmBQ1+S+vRuUQ@mail.gmail.com
When a Gather or Gather Merge node is started and stopped multiple
times, the old code wouldn't reset the shared state between executions,
potentially resulting in dramatically inflated instrumentation data
for nodes beneath it. (The per-worker instrumentation ended up OK,
I think, but the overall totals were inflated.)
Report by hubert depesz lubaczewski. Analysis and fix by Amit Kapila,
reviewed and tweaked a bit by me.
Discussion: http://postgr.es/m/20171127175631.GA405@depesz.com
If a hash join appears in a parallel query, there may be no hash table
available for explain.c to inspect even though a hash table may have
been built in other processes. This could happen either because
parallel_leader_participation was set to off or because the leader
happened to hit the end of the outer relation immediately (even though
the complete relation is not empty) and decided not to build the hash
table.
Commit bf11e7ee introduced a way for workers to exchange
instrumentation via the DSM segment for Sort nodes even though they
are not parallel-aware. This commit does the same for Hash nodes, so
that explain.c has a way to find instrumentation data from an
arbitrary participant that actually built the hash table.
Author: Thomas Munro
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm%3D3DUQC2-z252N55eOcZBer6DPdM%3DFzrxH9dZc5vYLsjaA%40mail.gmail.com
Before commit 6b65a7fe62, tqueue.c could
perform tuple remapping and thus leak memory, which is why commit
af33039317 made TupleQueueReaderNext
run in a short-lived context. Now, however, tqueue.c has been reduced
to a shadow of its former self, and there shouldn't be any chance of
leaks any more. Accordingly, remove some tuple copying and memory
context manipulation to speed up processing.
Patch by me, reviewed by Amit Kapila. Some testing by Rafia Sabih.
Discussion: http://postgr.es/m/CAA4eK1LSDydwrNjmYSNkfJ3ZivGSWH9SVswh6QpNzsMdj_oOQA@mail.gmail.com
Without this, when partdesc->nparts == 0, we end up calling
ExecBuildSlotPartitionKeyDescription without initializing values
and isnull.
Reported by Coverity via Michael Paquier. Patch by Michael Paquier,
reviewed and revised by Amit Langote.
Discussion: http://postgr.es/m/CAB7nPqQ3mwkdMoPY-ocgTpPnjd8TKOadMxdTtMLvEzF8480Zfg@mail.gmail.com
This adds a new object type "procedure" that is similar to a function
but does not have a return type and is invoked by the new CALL statement
instead of SELECT or similar. This implementation is aligned with the
SQL standard and compatible with or similar to other SQL implementations.
This commit adds new commands CALL, CREATE/ALTER/DROP PROCEDURE, as well
as ALTER/DROP ROUTINE that can refer to either a function or a
procedure (or an aggregate function, as an extension to SQL). There is
also support for procedures in various utility commands such as COMMENT
and GRANT, as well as support in pg_dump and psql. Support for defining
procedures is available in all the languages supplied by the core
distribution.
While this commit is mainly syntax sugar around existing functionality,
future features will rely on having procedures as a separate object
type.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
If we have a plan that uses parallelism but are unable to execute it
using parallelism, for example due to a lack of available DSM
segments, then the EState's es_query_dsa will be NULL. Parallel
bitmap heap scan needs to fall back to a non-parallel scan in such
cases.
Patch by me, reviewed by Dilip Kumar
Discussion: http://postgr.es/m/CAEepm=0kADK5inNf_KuemjX=HQ=PuTP0DykM--fO5jS5ePVFEA@mail.gmail.com
rewriteTargetListUD's processing is dependent on the relkind of the query's
target table. That was fine at the time it was made to act that way, even
for queries on inheritance trees, because all tables in an inheritance tree
would necessarily be plain tables. However, the 9.5 feature addition
allowing some members of an inheritance tree to be foreign tables broke the
assumption that rewriteTargetListUD's output tlist could be applied to all
child tables with nothing more than column-number mapping. This led to
visible failures if foreign child tables had row-level triggers, and would
also break in cases where child tables belonged to FDWs that used methods
other than CTID for row identification.
To fix, delay running rewriteTargetListUD until after the planner has
expanded inheritance, so that it is applied separately to the (already
mapped) tlist for each child table. We can conveniently call it from
preprocess_targetlist. Refactor associated code slightly to avoid the
need to heap_open the target relation multiple times during
preprocess_targetlist. (The APIs remain a bit ugly, particularly around
the point of which steps scribble on parse->targetList and which don't.
But avoiding such scribbling would require a change in FDW callback APIs,
which is more pain than it's worth.)
Also fix ExecModifyTable to ensure that "tupleid" is reset to NULL when
we transition from rows providing a CTID to rows that don't. (That's
really an independent bug, but it manifests in much the same cases.)
Add a regression test checking one manifestation of this problem, which
was that row-level triggers on a foreign child table did not work right.
Back-patch to 9.5 where the problem was introduced.
Etsuro Fujita, reviewed by Ildus Kurbangaliev and Ashutosh Bapat
Discussion: https://postgr.es/m/20170514150525.0346ba72@postgrespro.ru
When nodeValuesscan.c was written, it was impossible to have a SubPlan in
VALUES --- any sub-SELECT there would have to be uncorrelated and thereby
would produce an InitPlan instead. We therefore took a shortcut in the
logic that throws away a ValuesScan's per-row expression evaluation data
structures. This was broken by the introduction of LATERAL however; a
sub-SELECT containing a lateral reference produces a correlated SubPlan.
The cleanest fix for this would be to give up the optimization of
discarding the expression eval state. But that still seems pretty
unappetizing for long VALUES lists. It seems to work to just prevent
the subexpressions from hooking into the ValuesScan node's subPlan
list, so let's do that and see how well it works. (If this breaks,
due to additional connections between the subexpressions and the outer
query structures, we might consider compromises like throwing away data
only for VALUES rows not containing SubPlans.)
Per bug #14924 from Christian Duta. Back-patch to 9.3 where LATERAL
was introduced.
Discussion: https://postgr.es/m/20171124120836.1463.5310@wrigleys.postgresql.org
It's most often the case that the target list for the Gather (Merge)
node matches the target list supplied by the underlying plan node;
when this is so, we can avoid the overhead of projecting.
This depends on commit f455e1125e for
proper functioning.
Idea by Andres Freund. Patch by me. Review by Amit Kapila.
Discussion: http://postgr.es/m/CA+TgmoZ0ZL=cesZFq8c9NnfK6bqy-wwUd3_74iYGodYrSoQ7Fw@mail.gmail.com
When strict aggregate combine functions, used in multi-stage/parallel
aggregation, returned NULL, we didn't check for that, invoking the
combine function with NULL the next round, despite it being strict.
The equivalent code invoking normal transition functions has a check
for that situation, which did not get copied in a7de3dc5c3. Fix the
bug by adding the equivalent check.
Based on a quick look I could not find any strict combine functions in
core actually returning NULL, and it doesn't seem very likely external
users have done so. So this isn't likely to have caused issues in
practice.
Add tests verifying transition / combine functions returning NULL is
tested.
Reported-By: Andres Freund
Author: Andres Freund
Discussion: https://postgr.es/m/20171121033642.7xvmjqrl4jdaaat3@alap3.anarazel.de
Backpatch: 9.6, where parallel aggregation was introduced
Specifically, pass the outer plan's PlanState instead of our own
PlanState. At present, ExecContextForcesOids doesn't actually care
which PlanState we pass; it just looks through to the underlying
EState to find the result relation or top-level eflags. However, in
the future it might care. If that happens, and if our goal is to get
a tuple descriptor that matches that of the outer plan, then I think
what we care about is whether the outer plan's context forces OIDs,
rather than whether our own context forces OIDs, just as we use the
outer node's target list rather than our own.
Patch by me, reviewed by Amit Kapila.
Discussion: http://postgr.es/m/CA+TgmoZ0ZL=cesZFq8c9NnfK6bqy-wwUd3_74iYGodYrSoQ7Fw@mail.gmail.com
Currently, there are no known consequences of this oversight, so no
back-patch. Several of the EXEC_FLAG_* constants aren't usable in
parallel mode anyway, and potential problems related to the presence
or absence of OIDs (see EXEC_FLAG_WITH_OIDS, EXEC_FLAG_WITHOUT_OIDS)
seem at present to be masked by the unconditional projection step
performed by Gather and Gather Merge. In general, however, it seems
important that all participants agree on the values of these flags,
which modify executor behavior globally, and a pending patch to skip
projection in Gather (Merge) would be outright broken in certain cases
without this fix.
Patch by me, based on investigation of a test case provided by Amit
Kapila. This patch was also reviewed by Amit Kapila.
Discussion: http://postgr.es/m/CA+TgmoZ0ZL=cesZFq8c9NnfK6bqy-wwUd3_74iYGodYrSoQ7Fw@mail.gmail.com
Previously, executor nodes running in parallel worker processes didn't
have access to the dsm_segment object used for parallel execution. In
order to support resource management based on DSM segment lifetime,
they need that. So create a ParallelWorkerContext object to hold it
and pass it to all InitializeWorker functions.
Author: Thomas Munro
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=2W=cOkiZxcg6qiFQP-dHUe09aqTrEMM7yJDrHMhDv_RA@mail.gmail.com
If a PARAM_EXEC parameter is used below a Gather (Merge) but the InitPlan
that computes it is attached to or above the Gather (Merge), force the
value to be computed before starting parallelism and pass it down to all
workers. This allows us to use parallelism in cases where it previously
would have had to be rejected as unsafe. We do - in this case - lose the
optimization that the value is only computed if it's actually used. An
alternative strategy would be to have the first worker that needs the value
compute it, but one downside of that approach is that we'd then need to
select a parallel-safe path to compute the parameter value; it couldn't for
example contain a Gather (Merge) node. At some point in the future, we
might want to consider both approaches.
Independent of that consideration, there is a great deal more work that
could be done to make more kinds of PARAM_EXEC parameters parallel-safe.
This infrastructure could be used to allow a Gather (Merge) on the inner
side of a nested loop (although that's not a very appealing plan) and
cases where the InitPlan is attached below the Gather (Merge) could be
addressed as well using various techniques. But this is a good start.
Amit Kapila, reviewed and revised by me. Reviewing and testing from
Kuntal Ghosh, Haribabu Kommi, and Tushar Ahuja.
Discussion: http://postgr.es/m/CAA4eK1LV0Y1AUV4cUCdC+sYOx0Z0-8NAJ2Pd9=UKsbQ5Sr7+JQ@mail.gmail.com
Some code is moved from partition.c, which has grown very quickly lately;
splitting the executor parts out might help to keep it from getting
totally out of control. Other code is moved from execMain.c. All is
moved to a new file execPartition.c. get_partition_for_tuple now has
a new interface that more clearly separates executor concerns from
generic concerns.
Amit Langote. A slight comment tweak by me.
Discussion: http://postgr.es/m/1f0985f8-3b61-8bc4-4350-baa6d804cb6d@lab.ntt.co.jp
Up until now, we only tracked the number of parameters, which was
sufficient to allocate an array of Datums of the appropriate size,
but not sufficient to, for example, know how to serialize a Datum
stored in one of those slots. An upcoming patch wants to do that,
so add this tracking to make it possible.
Patch by me, reviewed by Tom Lane and Amit Kapila.
Discussion: http://postgr.es/m/CA+TgmoYqpxDKn8koHdW8BEKk8FMUL0=e8m2Qe=M+r0UBjr3tuQ@mail.gmail.com
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
It turns out we misdiagnosed what the real problem was. Revert the
previous changes, because they may have worse consequences going
forward. A better fix is forthcoming.
The simplistic test case is kept, though disabled.
Discussion: https://postgr.es/m/20171102112019.33wb7g5wp4zpjelu@alap3.anarazel.de
If we don't have to return any columns from heap tuples, and there's
no need to recheck qual conditions, and the heap page is all-visible,
then we can skip fetching the heap page altogether.
Skip prefetching pages too, when possible, on the assumption that the
recheck flag will remain the same from one page to the next. While that
assumption is hardly bulletproof, it seems like a good bet most of the
time, and better than prefetching pages we don't need.
This commit installs the executor infrastructure, but doesn't change
any planner cost estimates, thus possibly causing bitmap scans to
not be chosen in cases where this change renders them the best choice.
I (tgl) am not entirely convinced that we need to account for this
behavior in the planner, because I think typically the bitmap scan would
get chosen anyway if it's the best bet. In any case the submitted patch
took way too many shortcuts, resulting in too many clearly-bad choices,
to be committable.
Alexander Kuzmenkov, reviewed by Alexey Chernyshov, and whacked around
rather heavily by me.
Discussion: https://postgr.es/m/239a8955-c0fc-f506-026d-c837e86c827b@postgrespro.ru
The previous comment (which was copied as boilerplate from one file
to the next) implied that it was the executor node itself which was
being serialized, but that's not right. We're not serializing
the executor nodes; we're just allowing them to store some
additional information in DSM. Adjusts the comment to reflect this.
Discussion: http://postgr.es/m/CA+TgmoaHVinxG=3h6qBAsyV8xaDyQwbzK7YZnYfE8nJFMK1=FA@mail.gmail.com
If we try to run a parallel plan in serial mode because, for example,
it's going to be scanned via a cursor, but for some reason we're
already in parallel mode (for example because an outer query is
running in parallel), we'd incorrectly try to launch workers.
Fix by adding a flag to the EState, so that we can be certain that
ExecutePlan() and ExecGather()/ExecGatherMerge() will have the same
idea about whether we are executing serially or in parallel.
Report and fix by Amit Kapila with help from Kuntal Ghosh. A few
tweaks by me.
Discussion: http://postgr.es/m/CAA4eK1+_BuZrmVCeua5Eqnm4Co9DAXdM5HPAOE2J19ePbR912Q@mail.gmail.com
This is the last major omission in our domains feature: you can now
make a domain over anything that's not a pseudotype.
The major complication from an implementation standpoint is that places
that might be creating tuples of a domain type now need to be prepared
to apply domain_check(). It seems better that unprepared code fail
with an error like "<type> is not composite" than that it silently fail
to apply domain constraints. Therefore, relevant infrastructure like
get_func_result_type() and lookup_rowtype_tupdesc() has been adjusted
to treat domain-over-composite as a distinct case that unprepared code
won't recognize, rather than just transparently treating it the same
as plain composite. This isn't a 100% solution to the possibility of
overlooked domain checks, but it catches most places.
In passing, improve typcache.c's support for domains (it can now cache
the identity of a domain's base type), and rewrite the argument handling
logic in jsonfuncs.c's populate_record[set]_worker to reduce duplicative
per-call lookups.
I believe this is code-complete so far as the core and contrib code go.
The PLs need varying amounts of work, which will be tackled in followup
patches.
Discussion: https://postgr.es/m/4206.1499798337@sss.pgh.pa.us
There is no reason to insist that direct arguments must match before
we can merge transition states of two aggregate calls. They're only
used during the finalfn call, so we can treat them as like the finalfn
itself. This allows, eg, merging of
select
percentile_cont(0.25) within group (order by a),
percentile_disc(0.5) within group (order by a)
from ...
This didn't matter (and could not have been tested) before we allowed
state merging of OSAs otherwise.
Discussion: https://postgr.es/m/CAB4ELO5RZhOamuT9Xsf72ozbenDLLXZKSk07FiSVsuJNZB861A@mail.gmail.com
The built-in OSAs all share the same transition function, so they can
share transition state as long as the final functions cooperate to not
do the sort step more than once. To avoid running the tuplesort object
in randomAccess mode unnecessarily, add a bit of infrastructure to
nodeAgg.c to let the aggregate functions find out whether the transition
state is actually being shared or not.
This doesn't work for the hypothetical aggregates, since those inject
a hypothetical row that isn't traceable to the shared input state.
So they remain marked aggfinalmodify = 'w'.
Discussion: https://postgr.es/m/CAB4ELO5RZhOamuT9Xsf72ozbenDLLXZKSk07FiSVsuJNZB861A@mail.gmail.com
An aggregate's input expression(s) are not supposed to be evaluated
at all for a row where its FILTER test fails ... but commit 8ed3f11bb
overlooked that requirement. Reshuffle so that aggregates having a
filter clause evaluate their arguments separately from those without.
This still gets the benefit of doing only one ExecProject in the
common case of multiple Aggrefs, none of which have filters.
While at it, arrange for filter clauses to be included in the common
ExecProject evaluation, thus perhaps buying a little bit even when
there are filters.
Back-patch to v10 where the bug was introduced.
Discussion: https://postgr.es/m/30065.1508161354@sss.pgh.pa.us
While poking around in the aggregate logic, I noticed that commit
8ed3f11bb broke the logic in nodeAgg.c that purports to detect nested
aggregates, by moving initialization of regular aggregate argument
expressions out of the code segment that checks for that.
You could argue that this check is unnecessary, but it's not much code
so I'm inclined to keep it as a backstop against parser and planner
bugs. However, there's certainly zero value in checking only some of
the subexpressions.
We can make the check complete again, and as a bonus make it a good
deal more bulletproof against future mistakes of the same ilk, by
moving it out to the outermost level of ExecInitAgg. This means we
need to check only once per Agg node not once per aggregate, which
also seems like a good thing --- if the check does find something
wrong, it's not urgent that we report it before the plan node
initialization finishes.
Since this requires remembering the original length of the aggs list,
I deleted a long-obsolete stanza that changed numaggs from 0 to 1.
That's so old it predates our decision that palloc(0) is a valid
operation, in (digs...) 2004, see commit 24a1e20f1.
In passing improve a few comments.
Back-patch to v10, just in case.
Up to now, there's been hard-wired assumptions that normal aggregates'
final functions never modify their transition states, while ordered-set
aggregates' final functions always do. This has always been a bit
limiting, and in particular it's getting in the way of improving the
built-in ordered-set aggregates to allow merging of transition states.
Therefore, let's introduce catalog and CREATE AGGREGATE infrastructure
that lets the finalfn's behavior be declared explicitly.
There are now three possibilities for the finalfn behavior: it's purely
read-only, it trashes the transition state irrecoverably, or it changes
the state in such a way that no more transfn calls are possible but the
state can still be passed to other, compatible finalfns. There are no
examples of this third case today, but we'll shortly make the built-in
OSAs act like that.
This change allows user-defined aggregates to explicitly disclaim support
for use as window functions, and/or to prevent transition state merging,
if their implementations cannot handle that. While it was previously
possible to handle the window case with a run-time error check, there was
not any way to prevent transition state merging, which in retrospect is
something commit 804163bc2 should have provided for. But better late
than never.
In passing, split out pg_aggregate.c's extern function declarations into
a new header file pg_aggregate_fn.h, similarly to what we've done for
some other catalog headers, so that pg_aggregate.h itself can be safe
for frontend files to include. This lets pg_dump use the symbolic
names for relevant constants.
Discussion: https://postgr.es/m/4834.1507849699@sss.pgh.pa.us
The previous convention doesn't lend itself to creating ResultRelInfos
lazily, as we already do in ExecGetTriggerResultRel. This patch
doesn't make anything lazier than before, but the pending patch for
UPDATE tuple routing proposes to do so (and there might be other
opportunities as well).
Amit Khandekar with some adjustments by me.
Discussion: http://postgr.es/m/CA+TgmoYPVP9Lyf6vUFA5DwxS4c--x6LOj2y36BsJaYtp62eXPQ@mail.gmail.com
If we merge the transition calculations for two different aggregates,
it's reasonable to assume that the transition function should not care
which of those Aggref structs it gets from AggGetAggref(). It is not
reasonable to make the same assumption about an aggregate final function,
however. Commit 804163bc2 broke this, as it will pass whichever Aggref
was first associated with the transition state in both cases.
This doesn't create an observable bug so far as the core system is
concerned, because the only existing uses of AggGetAggref() are in
ordered-set aggregates that happen to not pay attention to anything
but the input properties of the Aggref; and besides that, we disabled
sharing of transition calculations for OSAs yesterday. Nonetheless,
if some third-party code were using AggGetAggref() in a normal aggregate,
they would be entitled to call this a bug. Hence, back-patch the fix
to 9.6 where the problem was introduced.
In passing, improve some of the comments about transition state sharing.
Discussion: https://postgr.es/m/CAB4ELO5RZhOamuT9Xsf72ozbenDLLXZKSk07FiSVsuJNZB861A@mail.gmail.com
This ought to work, but the built-in OSAs are not capable of coping,
because their final-functions destructively modify their transition
state (specifically, the contained tuplesort object). That was fine
when those functions were written, but commit 804163bc2 moved the
goalposts without telling orderedsetaggs.c.
We should fix the built-in OSAs to support this, but it will take
a little work, especially if we don't want to sacrifice performance
in the normal non-shared-state case. Given that it took a year after
9.6 release for anyone to notice this bug, we should not prioritize
sharable-state over nonsharable-state performance. And a proper fix
is likely to be more complicated than we'd want to back-patch, too.
Therefore, let's just put in this stop-gap patch to prevent nodeAgg.c
from choosing to use shared state for OSAs. We can revert it in HEAD
when we get a better fix.
Report from Lukas Eder, diagnosis by me, patch by David Rowley.
Back-patch to 9.6 where the problem was introduced.
Discussion: https://postgr.es/m/CAB4ELO5RZhOamuT9Xsf72ozbenDLLXZKSk07FiSVsuJNZB861A@mail.gmail.com
This takes advantage of the infrastructure introduced by commit
81c5e46c49 to greatly reduce the
likelihood that two different queries will end up with the same query
ID. It's still possible, of course, but whereas before it the chances
of a collision reached 25% around 50,000 queries, it will now take
more than 3 billion queries.
Backward incompatibility: Because the type exposed at the SQL level is
int8, users may now see negative query IDs in the pg_stat_statements
view (and also, query IDs more than 4 billion, which was the old
limit).
Patch by me, reviewed by Michael Paquier and Peter Geoghegan.
Discussion: http://postgr.es/m/CA+TgmobG_Kp4cBKFmsznUAaM1GWW6hhRNiZC0KjRMOOeYnz5Yw@mail.gmail.com
Previously nodeProjectSet only released memory once per input tuple,
rather than once per returned tuple. If the computation of an
individual returned tuple requires a lot of memory, that can lead to
problems.
Instead change things so that the expression context can be reset once
per output tuple, which requires a new memory context to store SRF
arguments in.
This is a longstanding issue, but was hard to fix before 9.6, due to
the way tSRFs where evaluated. But it's fairly easy to fix now. We
could backpatch this into 10, but given there've been fewc omplaints
that doesn't seem worth the risk so far.
Reported-By: Lucas Fairchild
Author: Andres Freund, per discussion with Tom Lane
Discussion: https://postgr.es/m/4514.1507318623@sss.pgh.pa.us
The logical decoding functions do BeginInternalSubTransaction and
RollbackAndReleaseCurrentSubTransaction to clean up after themselves.
It turns out that AtEOSubXact_SPI has an unrecognized assumption that
we always need to cancel the active SPI operation in the SPI context
that surrounds the subtransaction (if there is one). That's true
when the RollbackAndReleaseCurrentSubTransaction call is coming from
the SPI-using function itself, but not when it's happening inside
some unrelated function invoked by a SPI query. In practice the
affected callers are the various PLs.
To fix, record the current subtransaction ID when we begin a SPI
operation, and clean up only if that ID is the subtransaction being
canceled.
Also, remove AtEOSubXact_SPI's assertion that it must have cleaned
up the surrounding SPI context's active tuptable. That's proven
wrong by the same test case.
Also clarify (or, if you prefer, reinterpret) the calling conventions
for _SPI_begin_call and _SPI_end_call. The memory context cleanup
in the latter means that these have always had the flavor of a matched
resource-management pair, but they weren't documented that way before.
Per report from Ben Chobot.
Back-patch to 9.4 where logical decoding came in. In principle,
the SPI changes should go all the way back, since the problem dates
back to commit 7ec1c5a86. But given the lack of field complaints
it seems few people are using internal subtransactions in this way.
So I don't feel a need to take any risks in 9.2/9.3.
Discussion: https://postgr.es/m/73FBA179-C68C-4540-9473-71E865408B15@silentmedia.com
Both ExecMakeFunctionResultSet() and evaluation of simple expressions
need to be done in the per-tuple memory context, not per-query, else
we leak data until end of query. This is a consideration that was
missed while refactoring code in the ProjectSet patch (note that in
pre-v10, ExecMakeFunctionResult is called in the per-tuple context).
Per bug #14843 from Ben M. Diagnosed independently by Andres and myself.
Discussion: https://postgr.es/m/20171005230321.28561.15927@wrigleys.postgresql.org
When some tuple versions in an update chain are frozen due to them being
older than freeze_min_age, the xmax/xmin trail can become broken. This
breaks HOT (and probably other things). A subsequent VACUUM can break
things in more serious ways, such as leaving orphan heap-only tuples
whose root HOT redirect items were removed. This can be seen because
index creation (or REINDEX) complain like
ERROR: XX000: failed to find parent tuple for heap-only tuple at (0,7) in table "t"
Because of relfrozenxid contraints, we cannot avoid the freezing of the
early tuples, so we must cope with the results: whenever we see an Xmin
of FrozenTransactionId, consider it a match for whatever the previous
Xmax value was.
This problem seems to have appeared in 9.3 with multixact changes,
though strictly speaking it seems unrelated.
Since 9.4 we have commit 37484ad2a "Change the way we mark tuples as
frozen", so the fix is simple: just compare the raw Xmin (still stored
in the tuple header, since freezing merely set an infomask bit) to the
Xmax. But in 9.3 we rewrite the Xmin value to FrozenTransactionId, so
the original value is lost and we have nothing to compare the Xmax with.
To cope with that case we need to compare the Xmin with FrozenXid,
assume it's a match, and hope for the best. Sadly, since you can
pg_upgrade a 9.3 instance containing half-frozen pages to newer
releases, we need to keep the old check in newer versions too, which
seems a bit brittle; I hope we can somehow get rid of that.
I didn't optimize the new function for performance. The new coding is
probably a bit slower than before, since there is a function call rather
than a straight comparison, but I'd rather have it work correctly than
be fast but wrong.
This is a followup after 20b6552242 fixed a few related problems.
Apparently, in 9.6 and up there are more ways to get into trouble, but
in 9.3 - 9.5 I cannot reproduce a problem anymore with this patch, so
there must be a separate bug.
Reported-by: Peter Geoghegan
Diagnosed-by: Peter Geoghegan, Michael Paquier, Daniel Wood,
Yi Wen Wong, Álvaro
Discussion: https://postgr.es/m/CAH2-Wznm4rCrhFAiwKPWTpEw2bXDtgROZK7jWWGucXeH3D1fmA@mail.gmail.com
Haribabu Kommi, reviewed by Dilip Kumar and Rafia Sabih. Various
cosmetic changes by me to explain why this appears to be safe but
allowing inserts in parallel mode in general wouldn't be. Also, I
removed the REFRESH MATERIALIZED VIEW case from Haribabu's patch,
since I'm not convinced that case is OK, and hacked on the
documentation somewhat.
Discussion: http://postgr.es/m/CAJrrPGdo5bak6qnPWe8Kpi8g_jfQEs-G4SYmG9y+OFaw2-dPvA@mail.gmail.com
Allowing arrays with a domain type as their element type was left un-done
in the original domain patch, but not for any very good reason. This
omission leads to such surprising results as array_agg() not working on
a domain column, because the parser can't identify a suitable output type
for the polymorphic aggregate.
In order to fix this, first clean up the APIs of coerce_to_domain() and
some internal functions in parse_coerce.c so that we consistently pass
around a CoercionContext along with CoercionForm. Previously, we sometimes
passed an "isExplicit" boolean flag instead, which is strictly less
information; and coerce_to_domain() didn't even get that, but instead had
to reverse-engineer isExplicit from CoercionForm. That's contrary to the
documentation in primnodes.h that says that CoercionForm only affects
display and not semantics. I don't think this change fixes any live bugs,
but it makes things more consistent. The main reason for doing it though
is that now build_coercion_expression() receives ccontext, which it needs
in order to be able to recursively invoke coerce_to_target_type().
Next, reimplement ArrayCoerceExpr so that the node does not directly know
any details of what has to be done to the individual array elements while
performing the array coercion. Instead, the per-element processing is
represented by a sub-expression whose input is a source array element and
whose output is a target array element. This simplifies life in
parse_coerce.c, because it can build that sub-expression by a recursive
invocation of coerce_to_target_type(). The executor now handles the
per-element processing as a compiled expression instead of hard-wired code.
The main advantage of this is that we can use a single ArrayCoerceExpr to
handle as many as three successive steps per element: base type conversion,
typmod coercion, and domain constraint checking. The old code used two
stacked ArrayCoerceExprs to handle type + typmod coercion, which was pretty
inefficient, and adding yet another array deconstruction to do domain
constraint checking seemed very unappetizing.
In the case where we just need a single, very simple coercion function,
doing this straightforwardly leads to a noticeable increase in the
per-array-element runtime cost. Hence, add an additional shortcut evalfunc
in execExprInterp.c that skips unnecessary overhead for that specific form
of expression. The runtime speed of simple cases is within 1% or so of
where it was before, while cases that previously required two levels of
array processing are significantly faster.
Finally, create an implicit array type for every domain type, as we do for
base types, enums, etc. Everything except the array-coercion case seems
to just work without further effort.
Tom Lane, reviewed by Andrew Dunstan
Discussion: https://postgr.es/m/9852.1499791473@sss.pgh.pa.us
Avoid the coding pattern "*op->resvalue = f();", as some compilers think
that requires them to evaluate "op->resvalue" before the function call.
Unless there are lots of free registers, this can lead to a useless
register spill and reload across the call.
I changed all the cases like this in ExecInterpExpr(), but didn't bother
in the out-of-line opcode eval subroutines, since those are presumably
not as performance-critical.
Discussion: https://postgr.es/m/2508.1506630094@sss.pgh.pa.us
If construct_array() or construct_md_array() were given a dimension of
zero, they'd produce an array that contains no elements but has positive
dimension. This violates a general expectation that empty arrays should
have ndims = 0; in particular, while arrays like this print as empty,
they don't compare equal to other empty arrays.
Up to now we've expected callers to avoid making such calls and instead
be careful to call construct_empty_array() if there would be no elements.
But this has always been an easily missed case, and we've repeatedly had to
fix callers to do it right. In bug #14826, Erwin Brandstetter pointed out
yet another such oversight, in ts_lexize(); and a bit of examination of
other call sites found at least two more with similar issues. So let's
fix the problem centrally and permanently by changing these two functions
to construct a proper zero-D empty array whenever the array would be empty.
This renders a few explicit calls of construct_empty_array() redundant,
but the only such place I found that really seemed worth changing was in
ExecEvalArrayExpr().
Although this fixes some very old bugs, no back-patch: the problem is
pretty minor and the risk of changing behavior seems to outweigh the
benefit in stable branches.
Discussion: https://postgr.es/m/20170923125723.1448.39412@wrigleys.postgresql.org
Discussion: https://postgr.es/m/20570.1506198383@sss.pgh.pa.us
The standard says that all changes of the same kind (insert, update, or
delete) caused in one table by a single SQL statement should be reported
in a single transition table; and by that, they mean to include foreign key
enforcement actions cascading from the statement's direct effects. It's
also reasonable to conclude that if the standard had wCTEs, they would say
that effects of wCTEs applying to the same table as each other or the outer
statement should be merged into one transition table. We weren't doing it
like that.
Hence, arrange to merge tuples from multiple update actions into a single
transition table as much as we can. There is a problem, which is that if
the firing of FK enforcement triggers and after-row triggers with
transition tables is interspersed, we might need to report more tuples
after some triggers have already seen the transition table. It seems like
a bad idea for the transition table to be mutable between trigger calls.
There's no good way around this without a major redesign of the FK logic,
so for now, resolve it by opening a new transition table each time this
happens.
Also, ensure that AFTER STATEMENT triggers fire just once per statement,
or once per transition table when we're forced to make more than one.
Previous versions of Postgres have allowed each FK enforcement query
to cause an additional firing of the AFTER STATEMENT triggers for the
referencing table, but that's certainly not per spec. (We're still
doing multiple firings of BEFORE STATEMENT triggers, though; is that
something worth changing?)
Also, forbid using transition tables with column-specific UPDATE triggers.
The spec requires such transition tables to show only the tuples for which
the UPDATE trigger would have fired, which means maintaining multiple
transition tables or else somehow filtering the contents at readout.
Maybe someday we'll bother to support that option, but it looks like a
lot of trouble for a marginal feature.
The transition tables are now managed by the AfterTriggers data structures,
rather than being directly the responsibility of ModifyTable nodes. This
removes a subtransaction-lifespan memory leak introduced by my previous
band-aid patch 3c4359521.
In passing, refactor the AfterTriggers data structures to reduce the
management overhead for them, by using arrays of structs rather than
several parallel arrays for per-query-level and per-subtransaction state.
I failed to resist the temptation to do some copy-editing on the SGML
docs about triggers, above and beyond merely documenting the effects
of this patch.
Back-patch to v10, because we don't want the semantics of transition
tables to change post-release.
Patch by me, with help and review from Thomas Munro.
Discussion: https://postgr.es/m/20170909064853.25630.12825@wrigleys.postgresql.org
During the development of d47cfef711 the CFI()s in ExecScan() were
moved back and forth, ending up in the wrong place. Thus queries that
largely spend their time in ExecScan(), and have neither projection
nor a qual, can't be cancelled in a timely manner.
Reported-By: Jeff Janes
Author: Andres Freund
Discussion: https://postgr.es/m/CAMkU=1weDXp8eLLPt9SO1LEUsJYYK9cScaGhLKpuN+WbYo9b5g@mail.gmail.com
Backpatch: 10, as d47cfef711
AFTER triggers using transition tables crashed if they were fired due
to a foreign key ON CASCADE update. This is because ExecEndModifyTable
flushes the transition tables, on the assumption that any trigger that
could need them was already fired during ExecutorFinish. Normally
that's true, because we don't allow transition-table-using triggers
to be deferred. However, foreign key CASCADE updates force any
triggers on the referencing table to be deferred to the outer query
level, by means of the EXEC_FLAG_SKIP_TRIGGERS flag. I don't recall
all the details of why it's like that and am pretty loath to redesign
it right now. Instead, just teach ExecEndModifyTable to skip destroying
the TransitionCaptureState when that flag is set. This will allow the
transition table data to survive until end of the current subtransaction.
This isn't a terribly satisfactory solution, because (1) we might be
leaking the transition tables for much longer than really necessary,
and (2) as things stand, an AFTER STATEMENT trigger will fire once per
RI updating query, ie once per row updated or deleted in the referenced
table. I suspect that is not per SQL spec. But redesigning this is a
research project that we're certainly not going to get done for v10.
So let's go with this hackish answer for now.
In passing, tweak AfterTriggerSaveEvent to not save the transition_capture
pointer into the event record for a deferrable trigger. This is not
necessary to fix the current bug, but it avoids letting dangling pointers
to long-gone transition tables persist in the trigger event queue. That's
at least a safety feature. It might also allow merging shared trigger
states in more cases than before.
I added a regression test that demonstrates the crash on unpatched code,
and also exposes the behavior of firing the AFTER STATEMENT triggers
once per row update.
Per bug #14808 from Philippe Beaudoin. Back-patch to v10.
Discussion: https://postgr.es/m/20170909064853.25630.12825@wrigleys.postgresql.org
It is equivalent in ANSI C to write (*funcptr) () and funcptr(). These
two styles have been applied inconsistently. After discussion, we'll
use the more verbose style for plain function pointer variables, to make
it clear that it's a variable, and the shorter style when the function
pointer is in a struct (s.func() or s->func()), because then it's clear
that it's not a plain function name, and otherwise the excessive
punctuation makes some of those invocations hard to read.
Discussion: https://www.postgresql.org/message-id/f52c16db-14ed-757d-4b48-7ef360b1631d@2ndquadrant.com
This doesn't allow routing tuple to the foreign partitions themselves,
but it permits tuples to be routed to regular partitions despite the
presence of foreign partitions in the same inheritance hierarchy.
Etsuro Fujita, reviewed by Amit Langote and by me.
Discussion: http://postgr.es/m/bc3db4c1-1693-3b8a-559f-33ad2b50b7ad@lab.ntt.co.jp
Move the responsibility for creating/destroying TupleQueueReaders into
execParallel.c, to avoid duplicative coding in nodeGather.c and
nodeGatherMerge.c. Also, instead of having DestroyTupleQueueReader do
shm_mq_detach, do it in the caller (which is now only ExecParallelFinish).
This means execParallel.c does both the attaching and detaching of the
tuple-queue-reader shm_mqs, which seems less weird than the previous
arrangement.
These changes also eliminate a vestigial memory leak (of the pei->tqueue
array). It's now demonstrable that rescans of Gather or GatherMerge don't
leak memory.
Discussion: https://postgr.es/m/8670.1504192177@sss.pgh.pa.us
Rescanning a GatherMerge led to leaking some memory in the executor's
query-lifespan context, because most of the node's working data structures
were simply abandoned and rebuilt from scratch. In practice, this might
never amount to much, given the cost of relaunching worker processes ---
but it's still pretty messy, so let's fix it.
We can rearrange things so that the tuple arrays are simply cleared and
reused, and we don't need to rebuild the TupleTableSlots either, just
clear them. One small complication is that because we might get a
different number of workers on each iteration, we can't keep the old
convention that the leader's gm_slots[] entry is the last one; the leader
might clobber a TupleTableSlot that we need for a worker in a future
iteration. Hence, adjust the logic so that the leader has slot 0 always,
while the active workers have slots 1..n.
Back-patch to v10 to keep all the existing versions of nodeGatherMerge.c
in sync --- because of the renumbering of the slots, there would otherwise
be a very large risk that any future backpatches in this module would
introduce bugs.
Discussion: https://postgr.es/m/8670.1504192177@sss.pgh.pa.us
The logic around shm_mq_detach was a few bricks shy of a load, because
(contrary to the comments for shm_mq_attach) all it did was update the
shared shm_mq state. That left us leaking a bit of process-local
memory, but much worse, the on_dsm_detach callback for shm_mq_detach
was still armed. That means that whenever we ultimately detach from
the DSM segment, we'd run shm_mq_detach again for already-detached,
possibly long-dead queues. This accidentally fails to fail today,
because we only ever re-use a shm_mq's memory for another shm_mq, and
multiple detach attempts on the last such shm_mq are fairly harmless.
But it's gonna bite us someday, so let's clean it up.
To do that, change shm_mq_detach's API so it takes a shm_mq_handle
not the underlying shm_mq. This makes the callers simpler in most
cases anyway. Also fix a few places in parallel.c that were just
pfree'ing the handle structs rather than doing proper cleanup.
Back-patch to v10 because of the risk that the revenant shm_mq_detach
callbacks would cause a live bug sometime. Since this is an API
change, it's too late to do it in 9.6. (We could make a variant
patch that preserves API, but I'm not excited enough to do that.)
Discussion: https://postgr.es/m/8670.1504192177@sss.pgh.pa.us
Comment the fields of GatherMergeState, and organize them a bit more
sensibly. Comment GMReaderTupleBuffer more usefully too. Improve
assorted other comments that were obsolete or just not very good English.
Get rid of the use of a GMReaderTupleBuffer for the leader process;
that was confusing, since only the "done" field was used, and that
in a way redundant with need_to_scan_locally.
In gather_merge_init, avoid calling load_tuple_array for
already-known-exhausted workers. I'm not sure if there's a live bug there,
but the case is unlikely to be well tested due to timing considerations.
Remove some useless code, such as duplicating the tts_isempty test done by
TupIsNull.
Remove useless initialization of ps.qual, replacing that with an assertion
that we have no qual to check. (If we did, the code would fail to check
it.)
Avoid applying heap_copytuple to a null tuple. While that fails to crash,
it's confusing and it makes the code less legible not more so IMO.
Propagate a couple of these changes into nodeGather.c, as well.
Back-patch to v10, partly because of the possibility that the
gather_merge_init change is fixing a live bug, but mostly to keep
the branches in sync to ease future bug fixes.
Previously, the parallel executor logic did reinitialization of shared
state within the ExecReScan code for parallel-aware scan nodes. This is
problematic, because it means that the ExecReScan call has to occur
synchronously (ie, during the parent Gather node's ReScan call). That is
swimming very much against the tide so far as the ExecReScan machinery is
concerned; the fact that it works at all today depends on a lot of fragile
assumptions, such as that no plan node between Gather and a parallel-aware
scan node is parameterized. Another objection is that because ExecReScan
might be called in workers as well as the leader, hacky extra tests are
needed in some places to prevent unwanted shared-state resets.
Hence, let's separate this code into two functions, a ReInitializeDSM
call and the ReScan call proper. ReInitializeDSM is called only in
the leader and is guaranteed to run before we start new workers.
ReScan is returned to its traditional function of resetting only local
state, which means that ExecReScan's usual habits of delaying or
eliminating child rescan calls are safe again.
As with the preceding commit 7df2c1f8d, it doesn't seem to be necessary
to make these changes in 9.6, which is a good thing because the FDW and
CustomScan APIs are impacted.
Discussion: https://postgr.es/m/CAA4eK1JkByysFJNh9M349u_nNjqETuEnY_y1VUc_kJiU0bxtaQ@mail.gmail.com
The ExecReScan machinery contains various optimizations for postponing
or skipping rescans of plan subtrees; for example a HashAgg node may
conclude that it can re-use the table it built before, instead of
re-reading its input subtree. But that is wrong if the input contains
a parallel-aware table scan node, since the portion of the table scanned
by the leader process is likely to vary from one rescan to the next.
This explains the timing-dependent buildfarm failures we saw after
commit a2b70c89c.
The established mechanism for showing that a plan node's output is
potentially variable is to mark it as depending on some runtime Param.
Hence, to fix this, invent a dummy Param (one that has a PARAM_EXEC
parameter number, but carries no actual value) associated with each Gather
or GatherMerge node, mark parallel-aware nodes below that node as dependent
on that Param, and arrange for ExecReScanGather[Merge] to flag that Param
as changed whenever the Gather[Merge] node is rescanned.
This solution breaks an undocumented assumption made by the parallel
executor logic, namely that all rescans of nodes below a Gather[Merge]
will happen synchronously during the ReScan of the top node itself.
But that's fundamentally contrary to the design of the ExecReScan code,
and so was doomed to fail someday anyway (even if you want to argue
that the bug being fixed here wasn't a failure of that assumption).
A follow-on patch will address that issue. In the meantime, the worst
that's expected to happen is that given very bad timing luck, the leader
might have to do all the work during a rescan, because workers think
they have nothing to do, if they are able to start up before the eventual
ReScan of the leader's parallel-aware table scan node has reset the
shared scan state.
Although this problem exists in 9.6, there does not seem to be any way
for it to manifest there. Without GatherMerge, it seems that a plan tree
that has a rescan-short-circuiting node below Gather will always also
have one above it that will short-circuit in the same cases, preventing
the Gather from being rescanned. Hence we won't take the risk of
back-patching this change into 9.6. But v10 needs it.
Discussion: https://postgr.es/m/CAA4eK1JkByysFJNh9M349u_nNjqETuEnY_y1VUc_kJiU0bxtaQ@mail.gmail.com
Up until now, when parallel query was used, no details about the
sort method or space used by the workers were available; details
were shown only for any sorting done by the leader. Fix that.
Commit 1177ab1dab forced the test case
added by commit 1f6d515a67 to run
without parallelism; now that we have this infrastructure, allow
that again, with a little tweaking to make it pass with and without
force_parallel_mode.
Robert Haas and Tom Lane
Discussion: http://postgr.es/m/CA+Tgmoa2VBZW6S8AAXfhpHczb=Rf6RqQ2br+zJvEgwJ0uoD_tQ@mail.gmail.com
If we only need, say, 10 tuples in total, then we certainly don't need
more than 10 tuples from any single process. Pushing down the limit
lets workers exit early when possible. For Gather Merge, there is
an additional benefit: a Sort immediately below the Gather Merge can
be done as a bounded sort if there is an applicable limit.
Robert Haas and Tom Lane
Discussion: http://postgr.es/m/CA+TgmoYa3QKKrLj5rX7UvGqhH73G1Li4B-EKxrmASaca2tFu9Q@mail.gmail.com
Minor improvements for commit 1f6d515a6. We do not need the (rather
expensive) test for SRFs in the targetlist, because since v10 any
such SRFs would appear in separate ProjectSet nodes. Also, make the
code look more like the existing cases by turning it into a simple
recursion --- the argument that there might be some performance
benefit to contorting the code seems unfounded to me, especially since
any good compiler should turn the tail-recursion into iteration anyway.
Discussion: http://postgr.es/m/CADE5jYLuugnEEUsyW6Q_4mZFYTxHxaVCQmGAsF0yiY8ZDggi-w@mail.gmail.com
This is a mechanical change in preparation for a later commit that
will change the layout of TupleDesc. Introducing a macro to abstract
the details of where attributes are stored will allow us to change
that in separate step and revise it in future.
Author: Thomas Munro, editorialized by Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=0ZtQ-SpsgCyzzYpsXS6e=kZWqk3g5Ygn3MDV7A8dabUA@mail.gmail.com
Add a new EState member es_leaf_result_relations, so that the trigger
code knows about ResultRelInfos created by tuple routing. Also make
sure ExplainPrintTriggers knows about partition-related
ResultRelInfos.
Etsuro Fujita, reviewed by Amit Langote
Discussion: http://postgr.es/m/57163e18-8e56-da83-337a-22f2c0008051@lab.ntt.co.jp
Instead, lock them in the caller using find_all_inheritors so that
they get locked in the standard order, minimizing deadlock risks.
Also in RelationGetPartitionDispatchInfo, avoid opening tables which
are not partitioned; there's no need.
Amit Langote, reviewed by Ashutosh Bapat and Amit Khandekar
Discussion: http://postgr.es/m/91b36fa1-c197-b72f-ca6e-56c593bae68c@lab.ntt.co.jp
Some of these comments wrongly implied that only an AFTER ROW trigger
will cause a 'wholerow' attribute to be present for a foreign table,
but a BEFORE ROW trigger can have the same effect. Others implied
that it would always be present for a foreign table, but that's not
true either.
Etsuro Fujita and Robert Haas
Discussion: http://postgr.es/m/10026bc7-1403-ef85-9e43-c6100c1cc0e3@lab.ntt.co.jp
Otherwise, partitioned tables with RETURNING expressions or subject
to a WITH CHECK OPTION do not work properly.
Amit Langote, reviewed by Amit Khandekar and Etsuro Fujita. A few
comment changes by me.
Discussion: http://postgr.es/m/9a39df80-871e-6212-0684-f93c83be4097@lab.ntt.co.jp
This allows us to add stack-depth checks the first time an executor
node is called, and skip that overhead on following
calls. Additionally it yields a nice speedup.
While it'd probably have been a good idea to have that check all
along, it has become more important after the new expression
evaluation framework in b8d7f053c5 - there's no stack depth
check in common paths anymore now. We previously relied on
ExecEvalExpr() being executed somewhere.
We should move towards that model for further routines, but as this is
required for v10, it seems better to only do the necessary (which
already is quite large).
Author: Andres Freund, Tom Lane
Reported-By: Julien Rouhaud
Discussion:
https://postgr.es/m/22833.1490390175@sss.pgh.pa.ushttps://postgr.es/m/b0af9eaa-130c-60d0-9e4e-7a135b1e0c76@dalibo.com
In a followup commit ExecProcNode(), and especially the large switch
it contains, will largely be replaced by a function pointer directly
to the correct node. The node functions will then get invoked by a
thin inline function wrapper. To avoid having to include miscadmin.h
in headers - CHECK_FOR_INTERRUPTS() - move the interrupt checks into
the individual executor routines.
While looking through all executor nodes, I noticed a number of
arguably missing interrupt checks, add these too.
Author: Andres Freund, Tom Lane
Reviewed-By: Tom Lane
Discussion:
https://postgr.es/m/22833.1490390175@sss.pgh.pa.us
Add error checks in some places that were calling get_opfamily_member
or get_opfamily_proc and just assuming that the call could never fail.
Also, standardize the wording for such errors in some other places.
None of these errors are expected in normal use, hence they're just
elog not ereport. But they may be handy for diagnosing omissions in
custom opclasses.
Rushabh Lathia found the oversight in RelationBuildPartitionKey();
I found the others by grepping for all callers of these functions.
Discussion: https://postgr.es/m/CAGPqQf2R9Nk8htpv0FFi+FP776EwMyGuORpc9zYkZKC8sFQE3g@mail.gmail.com
Before, we always used a dummy value of 1, but that's not right when
the partitioned table being modified is inside of a WITH clause
rather than part of the main query.
Amit Langote, reported and reviewd by Etsuro Fujita, with a comment
change by me.
Discussion: http://postgr.es/m/ee12f648-8907-77b5-afc0-2980bcb0aa37@lab.ntt.co.jp
Given this code's general eagerness to use subexpressions' output variables
as temporary workspace, it's not exactly clear that it is safe for
FieldStore to tell a newval subexpression that it can write into the same
variable that is being supplied as a potential input. Document the chain
of assumptions needed for that to be safe.
I got confused about why this function doesn't need to recursively
search the expression tree for a CaseTestExpr node. After figuring
that out, add a comment to save the next person some time.
Add missing infrastructure for this node type, notably in ruleutils.c where
its lack could demonstrably cause EXPLAIN to fail. Add outfuncs/readfuncs
support. (outfuncs support is useful today for debugging purposes. The
readfuncs support may never be needed, since at present it would only
matter for parallel query and NextValueExpr should never appear in a
parallelizable query; but it seems like a bad idea to have a primnode type
that isn't fully supported here.) Teach planner infrastructure that
NextValueExpr is a volatile, parallel-unsafe, non-leaky expression node
with cost cpu_operator_cost. Given its limited scope of usage, there
*might* be no live bug today from the lack of that knowledge, but it's
certainly going to bite us on the rear someday. Teach pg_stat_statements
about the new node type, too.
While at it, also teach cost_qual_eval() that MinMaxExpr, SQLValueFunction,
XmlExpr, and CoerceToDomain should be charged as cpu_operator_cost.
Failing to do this for SQLValueFunction was an oversight in my commit
0bb51aa96. The others are longer-standing oversights, but no time like the
present to fix them. (In principle, CoerceToDomain could have cost much
higher than this, but it doesn't presently seem worth trying to examine the
domain's constraints here.)
Modify execExprInterp.c to execute NextValueExpr as an out-of-line
function; it seems quite unlikely to me that it's worth insisting that
it be inlined in all expression eval methods. Besides, providing the
out-of-line function doesn't stop anyone from inlining if they want to.
Adjust some places where NextValueExpr support had been inserted with the
aid of a dartboard rather than keeping it in the same order as elsewhere.
Discussion: https://postgr.es/m/23862.1499981661@sss.pgh.pa.us
The comparison with the target rows on the subscriber side was done with
datumIsEqual(), which can have false negatives. For instance, it didn't
work reliably for text columns. So use the equality operator provided
by the type cache instead.
Also add more user documentation about replica identity requirements.
Reported-by: Tatsuo Ishii <ishii@sraoss.co.jp>
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
When we reimplemented SRFs in commit 69f4b9c85, our initial choice was
to allow the behavior to vary from historical practice in cases where a
SRF call appeared within a conditional-execution construct (currently,
only CASE or COALESCE). But that was controversial to begin with, and
subsequent discussion has resulted in a consensus that it's better to
throw an error instead of executing the query differently from before,
so long as we can provide a reasonably clear error message and a way to
rewrite the query.
Hence, add a parser mechanism to allow detection of such cases during
parse analysis. The mechanism just requires storing, in the ParseState,
a pointer to the set-returning FuncExpr or OpExpr most recently emitted
by parse analysis. Then the parsing functions for CASE and COALESCE can
detect the presence of a SRF in their arguments by noting whether this
pointer changes while analyzing their arguments. Furthermore, if it does,
it provides a suitable error cursor location for the complaint. (This
means that if there's more than one SRF in the arguments, the error will
point at the last one to be analyzed not the first. While connoisseurs of
parsing behavior might find that odd, it's unlikely the average user would
ever notice.)
While at it, we can also provide more specific error messages than before
about some pre-existing restrictions, such as no-SRFs-within-aggregates.
Also, reject at parse time cases where a NULLIF or IS DISTINCT FROM
construct would need to return a set. We've never supported that, but the
restriction is depended on in more subtle ways now, so it seems wise to
detect it at the start.
Also, provide some documentation about how to rewrite a SRF-within-CASE
query using a custom wrapper SRF.
It turns out that the information_schema.user_mapping_options view
contained an instance of exactly the behavior we're now forbidding; but
rewriting it makes it more clear and safer too.
initdb forced because of user_mapping_options change.
Patch by me, with error message suggestions from Alvaro Herrera and
Andres Freund, pursuant to a complaint from Regina Obe.
Discussion: https://postgr.es/m/000001d2d5de$d8d66170$8a832450$@pcorp.us
ExecInitModifyTable() thought there was a plan per partition, but no,
there's only one. The problem had escaped detection so far because there
would only be visible misbehavior if there were a SubPlan (not an InitPlan)
in the quals being duplicated for each partition. However, valgrind
detected a bogus memory access in test cases added by commit 4f7a95be2,
and investigation of that led to discovery of the bug. The additional
test case added here crashes without the patch.
Patch by Amit Langote, test case by me.
Discussion: https://postgr.es/m/10974.1497227727@sss.pgh.pa.us
Since tuple-routing implicitly checks the partitioning constraints
at least for the levels of the partitioning hierarchy it traverses,
there's normally no need to revalidate the partitioning constraint
after performing tuple routing. However, if there's a BEFORE trigger
on the target partition, it could modify the tuple, causing the
partitioning constraint to be violated. Catch that case.
Also, instead of checking the root table's partition constraint after
tuple-routing, check it beforehand. Otherwise, the rules for when
the partitioning constraint gets checked get too complicated, because
you sometimes have to check part of the constraint but not all of it.
This effectively reverts commit 39162b2030
in favor of a different approach altogether.
Report by me. Initial debugging by Jeevan Ladhe. Patch by Amit
Langote, reviewed by me.
Discussion: http://postgr.es/m/CA+Tgmoa9DTgeVOqopieV8d1QRpddmP65aCdxyjdYDoEO5pS5KA@mail.gmail.com
Given the possibility of race conditions and so on, it seems entirely
unsafe to just assume that shm_toc_lookup() always finds the key it's
looking for --- but that was exactly what all but one call site were
doing. To fix, add a "bool noError" argument, similarly to what we
have in many other functions, and throw an error on an unexpected
lookup failure. Remove now-redundant Asserts that a rather random
subset of call sites had.
I doubt this will throw any light on buildfarm member lorikeet's
recent failures, because if an unnoticed lookup failure were involved,
you'd kind of expect a null-pointer-dereference crash rather than the
observed symptom. But you never know ... and this is better coding
practice even if it never catches anything.
Discussion: https://postgr.es/m/9697.1496675981@sss.pgh.pa.us
We used to only check for a supported relkind on the subscriber during
replication, which is needed to ensure that the setup is valid and we
don't crash. But it's also useful to tell the user immediately when
CREATE or ALTER SUBSCRIPTION is executed that the relation being added
to the subscription is not of a supported relkind.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reported-by: tushar <tushar.ahuja@enterprisedb.com>
Reformat various places in which pgindent will make a mess, and
fix a few small violations of coding style that I happened to notice
while perusing the diffs from a pgindent dry run.
There is one actual bug fix here: the need-to-enlarge-the-buffer code
path in icu_convert_case was obviously broken. Perhaps it's unreachable
in our usage? Or maybe this is just sadly undertested.
The mess cleaned up in commit da0759600 is clear evidence that it's a
bug hazard to expect the caller of get_attstatsslot()/free_attstatsslot()
to provide the correct type OID for the array elements in the slot.
Moreover, we weren't even getting any performance benefit from that,
since get_attstatsslot() was extracting the real type OID from the array
anyway. So we ought to get rid of that requirement; indeed, it would
make more sense for get_attstatsslot() to pass back the type OID it found,
in case the caller isn't sure what to expect, which is likely in binary-
compatible-operator cases.
Another problem with the current implementation is that if the stats array
element type is pass-by-reference, we incur a palloc/memcpy/pfree cycle
for each element. That seemed acceptable when the code was written because
we were targeting O(10) array sizes --- but these days, stats arrays are
almost always bigger than that, sometimes much bigger. We can save a
significant number of cycles by doing one palloc/memcpy/pfree of the whole
array. Indeed, in the now-probably-common case where the array is toasted,
that happens anyway so this method is basically free. (Note: although the
catcache code will inline any out-of-line toasted values, it doesn't
decompress them. At the other end of the size range, it doesn't expand
short-header datums either. In either case, DatumGetArrayTypeP would have
to make a copy. We do end up using an extra array copy step if the element
type is pass-by-value and the array length is neither small enough for a
short header nor large enough to have suffered compression. But that
seems like a very acceptable price for winning in pass-by-ref cases.)
Hence, redesign to take these insights into account. While at it,
convert to an API in which we fill a struct rather than passing a bunch
of pointers to individual output arguments. That will make it less
painful if we ever want further expansion of what get_attstatsslot can
pass back.
It's certainly arguable that this is new development and not something to
push post-feature-freeze. However, I view it as primarily bug-proofing
and therefore something that's better to have sooner not later. Since
we aren't quite at beta phase yet, let's put it in.
Discussion: https://postgr.es/m/16364.1494520862@sss.pgh.pa.us
Even though no actual tuples are ever inserted into a partitioned
table (the actual tuples are in the partitions, not the partitioned
table itself), we still need to have a ResultRelInfo for the
partitioned table, or per-statement triggers won't get fired.
Amit Langote, per a report from Rajkumar Raghuwanshi. Reviewed by me.
Discussion: http://postgr.es/m/CAKcux6%3DwYospCRY2J4XEFuVy0L41S%3Dfic7rmkbsU-GXhhSbmBg%40mail.gmail.com
Since it appears that v10 is going to move the goalposts by some amount
in terms of where you can and can't invoke set-returning functions,
arrange for the executor's "set-valued function called in context that
cannot accept a set" errors to include a syntax position if possible,
pointing to the specific SRF that can't be called where it's located.
The main bit of infrastructure needed for this is to make the query source
text accessible in the executor; but it turns out that commit 4c728f382
already did that. We just need a new function executor_errposition()
modeled on parser_errposition(), and we're ready to rock.
While experimenting with this, I noted that the error position wasn't
properly reported if it occurred in a plpgsql FOR-over-query loop,
which turned out to be because SPI_cursor_open_internal wasn't providing
an error context callback during PortalStart. Fix that.
There's a whole lot more that could be done with this infrastructure
now that it's there, but this is not the right time in the development
cycle for that sort of work. Hence, resist the temptation to plaster
executor_errposition() calls everywhere ... for the moment.
Discussion: https://postgr.es/m/5263.1492471571@sss.pgh.pa.us
We'd already recognized that we can't pass function pointers across process
boundaries for functions in loadable modules, since a shared library could
get loaded at different addresses in different processes. But actually the
practice doesn't work for functions in the core backend either, if we're
using EXEC_BACKEND. This is the cause of recent failures on buildfarm
member culicidae. Switch to passing a string function name in all cases.
Something like this needs to be back-patched into 9.6, but let's see
if the buildfarm likes it first.
Petr Jelinek, with a bunch of basically-cosmetic adjustments by me
Discussion: https://postgr.es/m/548f9c1d-eafa-e3fa-9da8-f0cc2f654e60@2ndquadrant.com
Commit 5e6d8d2bb allowed parallel workers to execute parallel-safe
subplans, but it transmitted the query's entire list of subplans to
the worker(s). Since execMain.c blindly does ExecInitNode and later
ExecEndNode on every list element, this resulted in parallel-unsafe plan
nodes nonetheless getting started up and shut down in parallel workers.
That seems mostly harmless as far as core plan node types go (but
maybe not so much for Gather?). But it resulted in postgres_fdw
opening and then closing extra remote connections, and it's likely
that other non-parallel-safe FDWs or custom scan providers would have
worse reactions.
To fix, just make ExecSerializePlan replace parallel-unsafe subplans
with NULLs in the cut-down plan tree that it transmits to workers.
This relies on ExecInitNode and ExecEndNode to do nothing on NULL
input, but they do anyway. If anything else is touching the dropped
subplans in a parallel worker, that would be a bug to be fixed.
(This thus provides a strong guarantee that we won't try to do
something with a parallel-unsafe subplan in a worker.)
This is, I think, the last fix directly occasioned by Andreas Seltenreich's
bug report of a few days ago.
Tom Lane and Amit Kapila
Discussion: https://postgr.es/m/87tw5x4vcu.fsf@credativ.de
This extends the castNode() notation introduced by commit 5bcab1114 to
provide, in one step, extraction of a list cell's pointer and coercion to
a concrete node type. For example, "lfirst_node(Foo, lc)" is the same
as "castNode(Foo, lfirst(lc))". Almost half of the uses of castNode
that have appeared so far include a list extraction call, so this is
pretty widely useful, and it saves a few more keystrokes compared to the
old way.
As with the previous patch, back-patch the addition of these macros to
pg_list.h, so that the notation will be available when back-patching.
Patch by me, after an idea of Andrew Gierth's.
Discussion: https://postgr.es/m/14197.1491841216@sss.pgh.pa.us
We decided in f1b4c771ea to pass the
original slot to ExecConstraints(), but that breaks when there are
BEFORE ROW triggers involved. So we need to do reverse-map the tuples
back to the original descriptor instead, as Amit originally proposed.
Amit Langote, reviewed by Ashutosh Bapat. One overlooked comment
fixed by me.
Discussion: http://postgr.es/m/b3a17254-6849-e542-2353-bde4e880b6a4@lab.ntt.co.jp
If there can certainly be no more than one matching inner row for a given
outer row, then the executor can move on to the next outer row as soon as
it's found one match; there's no need to continue scanning the inner
relation for this outer row. This saves useless scanning in nestloop
and hash joins. In merge joins, it offers the opportunity to skip
mark/restore processing, because we know we have not advanced past the
first possible match for the next outer row.
Of course, the devil is in the details: the proof of uniqueness must
depend only on joinquals (not otherquals), and if we want to skip
mergejoin mark/restore then it must depend only on merge clauses.
To avoid adding more planning overhead than absolutely necessary,
the present patch errs in the conservative direction: there are cases
where inner_unique or skip_mark_restore processing could be used, but
it will not do so because it's not sure that the uniqueness proof
depended only on "safe" clauses. This could be improved later.
David Rowley, reviewed and rather heavily editorialized on by me
Discussion: https://postgr.es/m/CAApHDvqF6Sw-TK98bW48TdtFJ+3a7D2mFyZ7++=D-RyPsL76gw@mail.gmail.com
tupconvert.c's functions formerly considered that an explicit tuple
conversion was necessary if the input and output tupdescs contained
different type OIDs. The point of that was to make sure that a composite
datum resulting from the conversion would contain the destination rowtype
OID in its composite-datum header. However, commit 3838074f8 entirely
misunderstood what that check was for, thinking that it had something to do
with presence or absence of an OID column within the tuple. Removal of the
check broke the no-op conversion path in ExecEvalConvertRowtype, as
reported by Ashutosh Bapat.
It turns out that of the dozen or so call sites for tupconvert.c functions,
ExecEvalConvertRowtype is the only one that cares about the composite-datum
header fields in the output tuple. In all the rest, we'd much rather avoid
an unnecessary conversion whenever the tuples are physically compatible.
Moreover, the comments in tupconvert.c only promise physical compatibility
not a metadata match. So, let's accept the removal of the guarantee about
the output tuple's rowtype marking, recognizing that this is a API change
that could conceivably break third-party callers of tupconvert.c. (So,
let's remember to mention it in the v10 release notes.)
However, commit 3838074f8 did have a bit of a point here, in that two
tuples mustn't be considered physically compatible if one has HEAP_HASOID
set and the other doesn't. (Some of the callers of tupconvert.c might not
really care about that, but we can't assume it in general.) The previous
check accidentally covered that issue, because no RECORD types ever have
OIDs, while if two tupdescs have the same named composite type OID then,
a fortiori, they have the same tdhasoid setting. If we're removing the
type OID match check then we'd better include tdhasoid match as part of
the physical compatibility check.
Without that hack in tupconvert.c, we need ExecEvalConvertRowtype to take
responsibility for inserting the correct rowtype OID label whenever
tupconvert.c decides it need not do anything. This is easily done with
heap_copy_tuple_as_datum, which will be considerably faster than a tuple
disassembly and reassembly anyway; so from a performance standpoint this
change is a win all around compared to what happened in earlier branches.
It just means a couple more lines of code in ExecEvalConvertRowtype.
Ashutosh Bapat and Tom Lane
Discussion: https://postgr.es/m/CAFjFpRfvHABV6+oVvGcshF8rHn+1LfRUhj7Jz1CDZ4gPUwehBg@mail.gmail.com
Add a "copy" argument to make it optional to receive a copy of caller
tuple that is safe to use following a subsequent manipulating of
tuplesort's state. This is a performance optimization. Most existing
tuplesort_gettupleslot() callers are made to opt out of copying.
Existing callers that happen to rely on the validity of tuple memory
beyond subsequent manipulations of the tuplesort request their own
copy.
This brings tuplesort_gettupleslot() in line with
tuplestore_gettupleslot(). In the future, a "copy"
tuplesort_getdatum() argument may be added, that similarly allows
callers to opt out of receiving their own copy of tuple.
In passing, clarify assumptions that callers of other tuplesort fetch
routines may make about tuple memory validity, per gripe from Tom
Lane.
Author: Peter Geoghegan
Discussion: CAM3SWZQWZZ_N=DmmL7tKy_OUjGH_5mN=N=A6h7kHyyDvEhg2DA@mail.gmail.com
This is the SQL standard-conforming variant of PostgreSQL's serial
columns. It fixes a few usability issues that serial columns have:
- CREATE TABLE / LIKE copies default but refers to same sequence
- cannot add/drop serialness with ALTER TABLE
- dropping default does not drop sequence
- need to grant separate privileges to sequence
- other slight weirdnesses because serial is some kind of special macro
Reviewed-by: Vitaly Burovoy <vitaly.burovoy@gmail.com>
Commit 59702716 added transition table support to PL/pgsql so that
SQL queries in trigger functions could access those transient
tables. In order to provide the same level of support for PL/perl,
PL/python and PL/tcl, refactor the relevant code into a new
function SPI_register_trigger_data. Call the new function in the
trigger handler of all four PLs, and document it as a public SPI
function so that authors of out-of-tree PLs can do the same.
Also get rid of a second QueryEnvironment object that was
maintained by PL/pgsql. That was previously used to deal with
cursors, but the same approach wasn't appropriate for PLs that are
less tangled up with core code. Instead, have SPI_cursor_open
install the connection's current QueryEnvironment, as already
happens for SPI_execute_plan.
While in the docs, remove the note that transition tables were only
supported in C and PL/pgSQL triggers, and correct some ommissions.
Thomas Munro with some work by Kevin Grittner (mostly docs)
On ProcessUtility document the parameter, to match others.
On CreateCachedPlan drop the queryEnv parameter. It was not
referenced within the function, and had been added on the
assumption that with some unknown future usage of QueryEnvironment
it might be useful to do something there. We have avoided other
"just in case" implementation of unused paramters, so drop it here.
Per gripe from Tom Lane
A QueryEnvironment concept is added, which allows new types of
objects to be passed into queries from parsing on through
execution. At this point, the only thing implemented is a
collection of EphemeralNamedRelation objects -- relations which
can be referenced by name in queries, but do not exist in the
catalogs. The only type of ENR implemented is NamedTuplestore, but
provision is made to add more types fairly easily.
An ENR can carry its own TupleDesc or reference a relation in the
catalogs by relid.
Although these features can be used without SPI, convenience
functions are added to SPI so that ENRs can easily be used by code
run through SPI.
The initial use of all this is going to be transition tables in
AFTER triggers, but that will be added to each PL as a separate
commit.
An incidental effect of this patch is to produce a more informative
error message if an attempt is made to modify the contents of a CTE
from a referencing DML statement. No tests previously covered that
possibility, so one is added.
Kevin Grittner and Thomas Munro
Reviewed by Heikki Linnakangas, David Fetter, and Thomas Munro
with valuable comments and suggestions from many others
It's unnecessary to return an actual slot when we have no tuple.
We can just return NULL, which avoids the risk of indexing into an
array that might not contain any elements.
Rushabh Lathia, per a report from Tomas Vondra
Discussion: http://postgr.es/m/6ecd6f17-0dcf-1de7-ded8-0de7db1ddc88@2ndquadrant.com
Formerly, a Var referencing an already-dropped column was allowed and would
always produce a NULL value. However, that behavior was implemented in
slot_getattr which the new expression code doesn't use; thus there is now a
risk of returning theoretically-deleted data. We had regression test cases
that purported to exercise this, but they failed to expose any problem,
apparently because plpgsql filters the dropped column and produces an
output tuple that has a NULL there already.
Ideally the DROP or ALTER attempt in these test cases would get rejected
due to dependency checks; but until that happens, let's modify the behavior
so that we fail the query during executor start. This was already true for
the related case of a column having changed type underneath us, and there's
no obvious reason why we need to be laxer for dropped columns.
In passing, adjust the error messages in CheckVarSlotCompatibility to
include the composite type name. In the cases shown in the regression
tests this is always just "record", but it should be more useful in
actual stale-plan cases, where the slot tupdesc would be a table's
tupdesc directly.
Discussion: https://postgr.es/m/16803.1490723570@sss.pgh.pa.us
This extends the Aggregate node with two new features: HashAggregate
can now run multiple hashtables concurrently, and a new strategy
MixedAggregate populates hashtables while doing sorted grouping.
The planner will now attempt to save as many sorts as possible when
planning grouping sets queries, while not exceeding work_mem for the
estimated combined sizes of all hashtables used. No SQL-level changes
are required. There should be no user-visible impact other than the
new EXPLAIN output and possible changes to result ordering when ORDER
BY was not used (which affected a few regression tests). The
enable_hashagg option is respected.
Author: Andrew Gierth
Reviewers: Mark Dilger, Andres Freund
Discussion: https://postgr.es/m/87vatszyhj.fsf@news-spur.riddles.org.uk
In commit b8d7f053c, we needed to fix ExecEvalWholeRowVar to not change
the state of the slot it's copying. The initial quick hack at that
required two rounds of tuple construction, which is not very nice.
To fix, add another primitive to tuptoaster.c that does precisely what
we need. (I initially tried to do this by refactoring one of the
existing functions into two pieces; but it looked like that might hurt
performance for the existing case, and the amount of code that could
be shared is not very large, so I gave up on that.)
Discussion: https://postgr.es/m/26088.1490315792@sss.pgh.pa.us
Both Andres and I were happy with "*op->resvalue = *op->resvalue;",
but Coverity isn't; and it has a point, because some compilers might
not be smart enough to elide that. So remove it. In passing, also
avoid doing unnecessary assignments to *op->resnull when it's already
known to have the right value.
The previous code still contained expression evaluation time support
for CaseExprs without a defresult. But transformCaseExpr() creates a
default expression if necessary.
Author: Andres Freund
Discussion: https://postgr.es/m/4834.1490480275@sss.pgh.pa.us
This replaces the old, recursive tree-walk based evaluation, with
non-recursive, opcode dispatch based, expression evaluation.
Projection is now implemented as part of expression evaluation.
This both leads to significant performance improvements, and makes
future just-in-time compilation of expressions easier.
The speed gains primarily come from:
- non-recursive implementation reduces stack usage / overhead
- simple sub-expressions are implemented with a single jump, without
function calls
- sharing some state between different sub-expressions
- reduced amount of indirect/hard to predict memory accesses by laying
out operation metadata sequentially; including the avoidance of
nearly all of the previously used linked lists
- more code has been moved to expression initialization, avoiding
constant re-checks at evaluation time
Future just-in-time compilation (JIT) has become easier, as
demonstrated by released patches intended to be merged in a later
release, for primarily two reasons: Firstly, due to a stricter split
between expression initialization and evaluation, less code has to be
handled by the JIT. Secondly, due to the non-recursive nature of the
generated "instructions", less performance-critical code-paths can
easily be shared between interpreted and compiled evaluation.
The new framework allows for significant future optimizations. E.g.:
- basic infrastructure for to later reduce the per executor-startup
overhead of expression evaluation, by caching state in prepared
statements. That'd be helpful in OLTPish scenarios where
initialization overhead is measurable.
- optimizing the generated "code". A number of proposals for potential
work has already been made.
- optimizing the interpreter. Similarly a number of proposals have
been made here too.
The move of logic into the expression initialization step leads to some
backward-incompatible changes:
- Function permission checks are now done during expression
initialization, whereas previously they were done during
execution. In edge cases this can lead to errors being raised that
previously wouldn't have been, e.g. a NULL array being coerced to a
different array type previously didn't perform checks.
- The set of domain constraints to be checked, is now evaluated once
during expression initialization, previously it was re-built
every time a domain check was evaluated. For normal queries this
doesn't change much, but e.g. for plpgsql functions, which caches
ExprStates, the old set could stick around longer. The behavior
around might still change.
Author: Andres Freund, with significant changes by Tom Lane,
changes by Heikki Linnakangas
Reviewed-By: Tom Lane, Heikki Linnakangas
Discussion: https://postgr.es/m/20161206034955.bh33paeralxbtluv@alap3.anarazel.de
In SQL, the ability to use parallel query was previous contingent on
fcache->readonly_func, which is only set for non-volatile functions;
but the volatility of a function has no bearing on whether queries
inside it can use parallelism. Remove that condition.
SPI_execute and SPI_execute_with_args always run the plan just once,
though not necessarily to completion. Given the changes in commit
691b8d5928, it's sensible to pass
CURSOR_OPT_PARALLEL_OK here, so do that. This improves access to
parallelism for any caller that uses these functions to execute
queries. Such callers include plperl, plpython, pltcl, and plpgsql,
though it's not the case that they all use these functions
exclusively.
In plpgsql, allow parallel query for plain SELECT queries (as
opposed to PERFORM, which already worked) and for plain expressions
(which probably won't go through the executor at all, because they
will likely be simple expressions, but if they do then this helps).
Rafia Sabih and Robert Haas, reviewed by Dilip Kumar and Amit Kapila
Discussion: http://postgr.es/m/CAOGQiiMfJ+4SQwgG=6CVHWoisiU0+7jtXSuiyXBM3y=A=eJzmg@mail.gmail.com
Previously, it was unsafe to execute a plan in parallel if
ExecutorRun() might be called with a non-zero row count. However,
it's quite easy to fix things up so that we can support that case,
provided that it is known that we will never call ExecutorRun() a
second time for the same QueryDesc. Add infrastructure to signal
this, and cross-checks to make sure that a caller who claims this is
true doesn't later reneg.
While that pattern never happens with queries received directly from a
client -- there's no way to know whether multiple Execute messages
will be sent unless the first one requests all the rows -- it's pretty
common for queries originating from procedural languages, which often
limit the result to a single tuple or to a user-specified number of
tuples.
This commit doesn't actually enable parallelism in any additional
cases, because currently none of the places that would be able to
benefit from this infrastructure pass CURSOR_OPT_PARALLEL_OK in the
first place, but it makes it much more palatable to pass
CURSOR_OPT_PARALLEL_OK in places where we currently don't, because it
eliminates some cases where we'd end up having to run the parallel
plan serially.
Patch by me, based on some ideas from Rafia Sabih and corrected by
Rafia Sabih based on feedback from Dilip Kumar and myself.
Discussion: http://postgr.es/m/CA+TgmobXEhvHbJtWDuPZM9bVSLiTj-kShxQJ2uM5GPDze9fRYA@mail.gmail.com
Partitioned tables do not contain any data; only their unpartitioned
descendents need to be scanned. However, the partitioned tables still
need to be locked, even though they're not scanned. To make that
work, Append and MergeAppend relations now need to carry a list of
(unscanned) partitioned relations that must be locked, and InitPlan
must lock all partitioned result relations.
Aside from the obvious advantage of avoiding some work at execution
time, this has two other advantages. First, it may improve the
planner's decision-making in some cases since the empty relation
might throw things off. Second, it paves the way to getting rid of
the storage for partitioned tables altogether.
Amit Langote, reviewed by me.
Discussion: http://postgr.es/m/6837c359-45c4-8044-34d1-736756335a15@lab.ntt.co.jp
This makes almost all core code follow the policy introduced in the
previous commit. Specific decisions:
- Text search support functions with char* and length arguments, such as
prsstart and lexize, may receive unaligned strings. I doubt
maintainers of non-core text search code will notice.
- Use plain VARDATA() on values detoasted or synthesized earlier in the
same function. Use VARDATA_ANY() on varlenas sourced outside the
function, even if they happen to always have four-byte headers. As an
exception, retain the universal practice of using VARDATA() on return
values of SendFunctionCall().
- Retain PG_GETARG_BYTEA_P() in pageinspect. (Page images are too large
for a one-byte header, so this misses no optimization.) Sites that do
not call get_page_from_raw() typically need the four-byte alignment.
- For now, do not change btree_gist. Its use of four-byte headers in
memory is partly entangled with storage of 4-byte headers inside
GBT_VARKEY, on disk.
- For now, do not change gtrgm_consistent() or gtrgm_distance(). They
incorporate the varlena header into a cache, and there are multiple
credible implementation strategies to consider.
Coverity noted that the last line of gather_merge_getnext() was
unreachable, since each arm of the preceding "if" ends in a "return".
Drop it as an oversight. In passing, improve some nearby comments.
Upcoming patches are revamping expression evaluation significantly. It
therefore seems prudent to try to ensure that the coverage of the
existing evaluation code is high.
This commit adds coverage for the cases that can reasonably be
tested. There's still a bunch of unreachable error messages and such,
but otherwise this achieves nearly full regression test coverage (with
the exception of the unused GetAttributeByNum/GetAttributeByName).
Author: Andres Freund
Discussion: https://postgr.es/m/20170310194021.ek4bs4bl2khxkmll@alap3.anarazel.de
Like Gather, we spawn multiple workers and run the same plan in each
one; however, Gather Merge is used when each worker produces the same
output ordering and we want to preserve that output ordering while
merging together the streams of tuples from various workers. (In a
way, Gather Merge is like a hybrid of Gather and MergeAppend.)
This works out to a win if it saves us from having to perform an
expensive Sort. In cases where only a small amount of data would need
to be sorted, it may actually be faster to use a regular Gather node
and then sort the results afterward, because Gather Merge sometimes
needs to wait synchronously for tuples whereas a pure Gather generally
doesn't. But if this avoids an expensive sort then it's a win.
Rushabh Lathia, reviewed and tested by Amit Kapila, Thomas Munro,
and Neha Sharma, and reviewed and revised by me.
Discussion: http://postgr.es/m/CAGPqQf09oPX-cQRpBKS0Gq49Z+m6KBxgxd_p9gX8CKk_d75HoQ@mail.gmail.com
The index is scanned by a single process, but then all cooperating
processes can iterate jointly over the resulting set of heap blocks.
In the future, we might also want to support using a parallel bitmap
index scan to set up for a parallel bitmap heap scan, but that's a
job for another day.
Dilip Kumar, with some corrections and cosmetic changes by me. The
larger patch set of which this is a part has been reviewed and tested
by (at least) Andres Freund, Amit Khandekar, Tushar Ahuja, Rafia
Sabih, Haribabu Kommi, Thomas Munro, and me.
Discussion: http://postgr.es/m/CAFiTN-uc4=0WxRGfCzs-xfkMYcSEWUC-Fon6thkJGjkh9i=13A@mail.gmail.com
XMLTABLE is defined by the SQL/XML standard as a feature that allows
turning XML-formatted data into relational form, so that it can be used
as a <table primary> in the FROM clause of a query.
This new construct provides significant simplicity and performance
benefit for XML data processing; what in a client-side custom
implementation was reported to take 20 minutes can be executed in 400ms
using XMLTABLE. (The same functionality was said to take 10 seconds
using nested PostgreSQL XPath function calls, and 5 seconds using
XMLReader under PL/Python).
The implemented syntax deviates slightly from what the standard
requires. First, the standard indicates that the PASSING clause is
optional and that multiple XML input documents may be given to it; we
make it mandatory and accept a single document only. Second, we don't
currently support a default namespace to be specified.
This implementation relies on a new executor node based on a hardcoded
method table. (Because the grammar is fixed, there is no extensibility
in the current approach; further constructs can be implemented on top of
this such as JSON_TABLE, but they require changes to core code.)
Author: Pavel Stehule, Álvaro Herrera
Extensively reviewed by: Craig Ringer
Discussion: https://postgr.es/m/CAFj8pRAgfzMD-LoSmnMGybD0WsEznLHWap8DO79+-GTRAPR4qA@mail.gmail.com
Parallel executor nodes can't assume that parallel execution will
happen in every case where the plan calls for it, because it might
not work out that way. However, parallel index scan and parallel
index-only scan failed to do the right thing here. Repair.
Amit Kapila, per a report from me.
Discussion: http://postgr.es/m/CAA4eK1Kq5qb_u2AOoda5XBB91vVWz90w=LgtRLgsssriS8pVTw@mail.gmail.com
When a shared iterator is used, each call to tbm_shared_iterate()
returns a result that has not yet been returned to any process
attached to the shared iterator. In other words, each cooperating
processes gets a disjoint subset of the full result set, but all
results are returned exactly once.
This is infrastructure for parallel bitmap heap scan.
Dilip Kumar. The larger patch set of which this is a part has been
reviewed and tested by (at least) Andres Freund, Amit Khandekar,
Tushar Ahuja, Rafia Sabih, Haribabu Kommi, and Thomas Munro.
Discussion: http://postgr.es/m/CAFiTN-uc4=0WxRGfCzs-xfkMYcSEWUC-Fon6thkJGjkh9i=13A@mail.gmail.com
Currently, the whole row is shown without column names. Instead,
adopt a style similar to _bt_check_unique() in ExecFindPartition()
and show the failing key: (key1, ...) = (val1, ...).
Amit Langote, per a complaint from Simon Riggs. Reviewed by me;
I also adjusted the grammar in one of the comments.
Discussion: http://postgr.es/m/9f9dc7ae-14f0-4a25-5485-964d9bfc19bd@lab.ntt.co.jp
The final patch will be less messy if the prefetching support is
a bit better isolated, so do that.
Dilip Kumar, with some changes by me. The larger patch set of which
this is a part has been reviewed and tested by (at least) Andres
Freund, Amit Khandekar, Tushar Ahuja, Rafia Sabih, Haribabu Kommi, and
Thomas Munro.
Robert Haas
Andres Freund
Peter Eisentraut
Tom Lane
Alvaro Herrera
Andrew Gierth
Heikki Linnakangas
Magnus Hagander
Bruce Momjian
Kevin Grittner
Noah Misch