Some openssl builds put their lib files in a VC subdirectory, others do
not. Cater for both cases.
Backpatch to all live branches.
From an offline discussion with Leonardo Cecchi.
Previously this was not allowed, as copy.c didn't set the
CURSOR_OPT_PARALLEL_OK flag when planning the query. Set it.
While the lack of parallel query for COPY isn't strictly speaking a
bug, it does prevent parallelism from being used in a facility
commonly used to run long running queries. Thus backpatch to 9.6.
Author: Andres Freund
Discussion: https://postgr.es/m/20170531231958.ihanapplorptykzm@alap3.anarazel.de
Backpatch: 9.6, where parallelism was introduced.
On some platforms, -fpic fails for sufficiently large shared libraries.
We've mostly not hit that boundary yet, but there are some extensions
such as Citus and pglogical where it's becoming a problem. A bit of
research suggests that the penalty for -fPIC is small, in the
single-digit-percentage range --- and there's none at all on popular
platforms such as x86_64. So let's just default to -fPIC everywhere
and provide one less thing for extension developers to worry about.
Per complaint from Christoph Berg. Back-patch to all supported branches.
(I did not bother to touch the recently-removed Makefiles for sco and
unixware in the back branches, though. We'd have no way to test that
it doesn't break anything on those platforms.)
Discussion: https://postgr.es/m/20170529155850.qojdfrwkkqnjb3ap@msg.df7cb.de
Remove some gratuituous message differences by making the AM name
previously embedded in each message be a %s instead. While at it, get
rid of terminology that's unclear and unnecessary in one message.
Discussion: https://postgr.es/m/20170523001557.bq2hbq7hxyvyw62q@alvherre.pgsql
pg_resetwal (formerly pg_resetxlog) doesn't insist on finding a matching
version number in pg_control, and that seems like an important thing to
preserve since recovering from corrupt pg_control is a prime reason to
need to run it. However, that means you can try to run it against a
data directory of a different major version, which is at best useless
and at worst disastrous. So as to provide some protection against that
type of pilot error, inspect PG_VERSION at startup and refuse to do
anything if it doesn't match. PG_VERSION is read-only after initdb,
so it's unlikely to get corrupted, and even if it were corrupted it would
be easy to fix by hand.
This hazard has been there all along, so back-patch to all supported
branches.
Michael Paquier, with some kibitzing by me
Discussion: https://postgr.es/m/f4b8eb91-b934-8a0d-b3cc-68f06e2279d1@enterprisedb.com
The NumericOnly grammar production accepted ICONST, + ICONST, - ICONST,
FCONST, and - FCONST, but for some reason not + FCONST. This led to
strange inconsistencies like
regression=# set random_page_cost = +4;
SET
regression=# set random_page_cost = 4000000000;
SET
regression=# set random_page_cost = +4000000000;
ERROR: syntax error at or near "4000000000"
(because 4000000000 is too large to be an ICONST). While there's
no actual functional reason to need to write a "+", if we allow
it for integers it seems like we should allow it for numerics too.
It's been like that forever, so back-patch to all supported branches.
Discussion: https://postgr.es/m/30908.1496006184@sss.pgh.pa.us
Commit 9aa3c782c added code to allow CREATE TABLE/CREATE TYPE to not fail
when the desired type name conflicts with an autogenerated array type, by
dint of renaming the array type out of the way. But I (tgl) overlooked
that the same case arises in ALTER TABLE/TYPE RENAME. Fix that too.
Back-patch to all supported branches.
Report and patch by Vik Fearing, modified a bit by me
Discussion: https://postgr.es/m/0f4ade49-4f0b-a9a3-c120-7589f01d1eb8@2ndquadrant.com
If an operator class has no operators or functions, and doesn't need
a STORAGE clause, we emitted "CREATE OPERATOR CLASS ... AS ;" which
is syntactically invalid. Fix by forcing a STORAGE clause to be
emitted anyway in this case.
(At some point we might consider changing the grammar to allow CREATE
OPERATOR CLASS without an opclass_item_list. But probably we'd want to
omit the AS in that case, so that wouldn't fix this pg_dump issue anyway.)
It's been like this all along, so back-patch to all supported branches.
Daniel Gustafsson, tweaked by me to avoid a dangling-pointer bug
Discussion: https://postgr.es/m/D9E5FC64-7A37-4F3D-B946-7E4FB468F88A@yesql.se
This patch replaces isspace() calls with scanner_isspace() in functions
that are likely to be presented with non-ASCII input. isspace() has
the small advantage that it will correctly recognize no-break space
in single-byte encodings (such as LATIN1); but it cannot work successfully
for any multibyte character, and depending on platform it might return
false positive results for some fragments of multibyte characters. That's
disastrous for functions that are trying to discard whitespace between
valid strings, as noted in bug #14662 from Justin Muise. Even treating
no-break space as whitespace is pretty questionable for the usages touched
here, because the core scanner would think it is an identifier character.
Affected functions are parse_ident(), parseNameAndArgTypes (underlying
regprocedurein() and siblings), SplitIdentifierString (used for parsing
GUCs and options that are qualified names or lists of names), and
SplitDirectoriesString (used for parsing GUCs that are lists of
directories).
All the functions adjusted here are parsing SQL identifiers and similar
constructs, so it's reasonable to insist that their definition of
whitespace match the core scanner. So we can hope that this won't cause
many backwards-compatibility problems. I've left alone isspace() calls
in places that aren't really expecting any non-ASCII input characters,
such as float8in().
Back-patch to all supported branches.
Discussion: https://postgr.es/m/10129.1495302480@sss.pgh.pa.us
The cash_div_intX functions applied rint() to the result of the division.
That's not merely useless (because the result is already an integer) but
it causes precision loss for values larger than 2^52 or so, because of
the forced conversion to float8.
On the other hand, the cash_mul_fltX functions neglected to apply rint() to
their multiplication results, thus possibly causing off-by-one outputs.
Per C standard, arithmetic between any integral value and a float value is
performed in float format. Thus, cash_mul_flt4 and cash_div_flt4 produced
answers good to only about six digits, even when the float value is exact.
We can improve matters noticeably by widening the float inputs to double.
(It's tempting to consider using "long double" arithmetic if available,
but that's probably too much of a stretch for a back-patched fix.)
Also, document that cash_div_intX operators truncate rather than round.
Per bug #14663 from Richard Pistole. Back-patch to all supported branches.
Discussion: https://postgr.es/m/22403.1495223615@sss.pgh.pa.us
This is more secure, and saves a redirect since we no longer accept
plain HTTP connections on the website.
References in code comments should probably be updated too, but
that doesn't seem to need back-patching, whereas this does.
Also, in the 9.2 branch, remove suggestion that you can get the
source code via FTP, since that service will be shut down soon.
Daniel Gustafsson, with a few additional changes by me
Discussion: https://postgr.es/m/9A2C89A7-0BB8-41A8-B288-8B7BD09D7D44@yesql.se
When stdin is a terminal, it's possible to end a COPY FROM STDIN with
a keyboard EOF signal (typically control-D), and then keep on issuing
SQL commands. One would expect another COPY FROM STDIN to work as well,
but on some platforms it did not. This turns out to be because we were
not resetting the stream's feof() flag, and BSD-ish versions of fread()
and fgets() won't attempt to read more data if that's set.
The misbehavior is observed on BSDen (including macOS), but not Linux,
Windows, or SysV-ish Unixen, which makes this a portability bug not
just a missing feature.
Add a clearerr() call to fix the behavior, and improve the prompt that's
issued when copying from a TTY to mention that EOF signals work.
It's been like this forever, so back-patch to all supported branches.
Thomas Munro
Discussion: https://postgr.es/m/CAEepm=0MCGfYf=JAMiYhO6JPtv9-3ZfBo8fcGeCZ8oMzaw+Z+Q@mail.gmail.com
Modifying the permissions of a persistent file isn't really much nicer
than modifying its contents, even if git doesn't currently notice it.
Adjust the test script to make a copy and set the permissions of that
instead.
Michael Paquier, per a gripe from me. Back-patch to 9.5 where these
tests were introduced.
Discussion: https://postgr.es/m/14836.1494885946@sss.pgh.pa.us
The CommentStmt made by RebuildConstraintComment() has to pstrdup the
relation name, else it will contain a dangling pointer after that
relcache entry is flushed. (I'm less sure that pstrdup'ing conname
is necessary, but let's be safe.) Failure to do this leads to weird
errors or crashes, as reported by Marko Elezovic.
Bug introduced by commit e42375fc8, so back-patch to 9.5 as that was.
Fix by David Rowley, regression test by Michael Paquier
Discussion: https://postgr.es/m/DB6PR03MB30775D58E732D4EB0C13725B9AE00@DB6PR03MB3077.eurprd03.prod.outlook.com
Commit 60690a6fe attempted to fix the wait_for_stats() function in this
test so that it would wait properly if the tenk2 scans were done in
parallel workers instead of the main session (typically as a consequence of
force_parallel_mode being turned on). However, we made it test for whether
the main session's actions had been reported by looking for inserts on
'trunc_stats_test'. This is the Wrong Thing, because those aren't the last
updates we expect the main session to do. As shown by recent failures on
buildfarm member frogmouth, it's entirely likely that the trunc_stats_test
updates will be reported in a separate message from later updates, which
means there can be a window in which wait_for_stats() will exit but not all
the updates we are expecting to see will have arrived. We should test for
the last updates we're expecting, namely those on 'trunc_stats_test4'.
Unfortunately, I doubt that this explains frogmouth's failures, because
there's no reason to believe that it's running the tenk2 queries in
parallel. Still, the test is wrong on its own terms, so fix and back-patch
to 9.6 where parallel query came in.
Ultra-modern versions of the perl Data::Dumper module have apparently
changed how they indent output. Instead of trying to keep up we choose
to tell it to supporess all indentation in the hstore_plperl regression
tests.
Backpatch to 9.5 where this feature was introduced.
Before 955a684e04 logical decoding snapshot maintenance needed to
cope with transactions it might not have seen in their entirety. For
such transactions we'd to assume they modified the catalog (could have
happened before we were watching), and thus a new snapshot had to be
built, and distributed to concurrently running transactions.
That's problematic because building a new snapshot isn't that cheap ,
especially as the the array of committed transactions needs to be
sorted. When creating a slot on a server with a lot of transactions,
this could make logical slot creation infeasibly expensive.
After 955a684e04 there's no need to deal with transaction that
aren't guaranteed to be fully observable. That allows to avoid
building snapshots for transactions that haven't modified catalog,
even before reaching consistency.
While this isn't necessarily a bugfix, slot creation being impossible
in some production workloads, is severe enough to warrant
backpatching.
Author: Andres Freund, based on a quite different patch from Petr Jelinek
Analyzed-By: Petr Jelinek
Reviewed-By: Petr Jelinek
Discussion: https://postgr.es/m/f37e975c-908f-858e-707f-058d3b1eb214@2ndquadrant.com
Backpatch: 9.4-, where logical decoding has been introduced
The snapshot assembly during the creation of logical slots relied
waiting for transactions in xl_running_xacts to end, by checking for
their commit/abort records. Unfortunately, despite locking, it is
possible to see an xl_running_xact record listing transactions as
ready, that have already WAL-logged an commit/abort record, as the
locking just prevents the ProcArray to be adjusted, and the commit
record has to be logged first.
That lead to either delayed or hanging snapshot creation, because
snapbuild.c would wait "forever" to see commit/abort records for some
transactions. That hang resolved only if a xl_running_xacts record
without any running transactions happened to be logged, far from
certain on a busy server.
It's impractical to prevent that via more heavyweight locking, the
likelihood of deadlocks and significantly increased contention would
be too big.
Instead change the initial snapshot creation to be solely based on
tracking the oldest running transaction via
xl_running_xacts->oldestRunningXid - that actually ends up
significantly simplifying the code. That has two disadvantages:
1) Because we cannot fully "trust" the contents of xl_running_xacts,
we cannot use it to build the initial snapshot. Instead we have to
wait twice for all running transactions to finish.
2) Previously a slot, unless the race occurred, could be created when
the all transaction perceived as running based on commit/abort
records, now we have to wait for the next xl_running_xacts record.
To address that, trigger logging new xl_running_xacts record from
within snapbuild.c exactly when necessary.
Unfortunately snabuild.c's SnapBuild is stored on disk, one of the
stupider ideas of a certain Mr Freund, so we can't change it in a
minor release. As this is going to be backpatched, we have to hack
around a bit to keep on-disk compatibility. A later commit will
rejigger that on master.
Author: Andres Freund, based on a quite different patch from Petr Jelinek
Analyzed-By: Petr Jelinek
Reviewed-By: Petr Jelinek
Discussion: https://postgr.es/m/f37e975c-908f-858e-707f-058d3b1eb214@2ndquadrant.com
Backpatch: 9.4-, where logical decoding has been introduced
We have now grown enough registerable syscache-invalidation callback
functions that the original assumption that there would be few of them
is causing performance problems. In particular, let's fix things so that
CallSyscacheCallbacks doesn't have to search the whole array to find
which callback(s) to invoke for a given cache ID. Preserve the original
behavior that callbacks are called in order of registration, just in
case there's someplace that depends on that (which I doubt).
In support of this, export the number of syscaches from syscache.h.
People could have found that out anyway from the enum, but adding a
#define makes that much safer.
This provides a useful additional speedup in Mathieu Fenniak's
logical-decoding test case, although we're reaching the point of
diminishing returns there. I think any further improvement will have
to come from reducing the number of cache invalidations that are
triggered in the first place. Still, we can hope that this change
gives some incremental benefit for all invalidation scenarios.
Back-patch to 9.4 where logical decoding was introduced.
Discussion: https://postgr.es/m/CAHoiPjzea6N0zuCi=+f9v_j94nfsy6y8SU7-=bp4=7qw6_i=Rg@mail.gmail.com
This has to be backpatched to all supported releases so release markup
added to HEAD and copied to back branches matches the existing markup.
Reported-by: Peter Eisentraut
Discussion: 2b8a2552-fffa-f7c8-97c5-14db47a87731@2ndquadrant.com
Author: initial patch and sample markup by Peter Eisentraut
Backpatch-through: 9.2
A test case provided by Mathieu Fenniak shows that hash_seq_search'ing
this hashtable can consume a very significant amount of overhead during
logical decoding, which triggers frequent cache invalidation. Testing
suggests that the actual population of the hashtable is often no more
than a few dozen entries, so we can cut the overhead just by dropping
the initial number of buckets down from 1024 --- I chose to cut it to 64.
(In situations where we do have a significant number of entries, we
shouldn't get any real penalty from doing this, as the dynahash.c code
will resize the hashtable automatically.)
This gives a further factor-of-two savings in Mathieu's test case.
That may be overly optimistic for real-world benefit, as real cases
may have larger average table populations, but it's hard to see it
turning into a net negative for any workload.
Back-patch to 9.4 where relfilenodemap.c was introduced.
Discussion: https://postgr.es/m/CAHoiPjzea6N0zuCi=+f9v_j94nfsy6y8SU7-=bp4=7qw6_i=Rg@mail.gmail.com
A test case provided by Mathieu Fenniak shows that the initial search for
the target catcache in CatalogCacheIdInvalidate consumes a very significant
amount of overhead in cases where cache invalidation is triggered but has
little useful work to do. There is no good reason for that search to exist
at all, as the index array maintained by syscache.c allows direct lookup of
the catcache from its ID. We just need a frontend function in syscache.c,
matching the division of labor for most other cache-accessing operations.
While there's more that can be done in this area, this patch alone reduces
the runtime of Mathieu's example by 2X. We can hope that it offers some
useful benefit in other cases too, although usually cache invalidation
overhead is not such a striking fraction of the total runtime.
Back-patch to 9.4 where logical decoding was introduced. It might be
worth going further back, but presently the only case we know of where
cache invalidation is really a significant burden is in logical decoding.
Also, older branches have fewer catcaches, reducing the possible benefit.
(Note: although this nominally changes catcache's API, we have always
documented CatalogCacheIdInvalidate as a private function, so I would
have little sympathy for an external module calling it directly. So
backpatching should be fine.)
Discussion: https://postgr.es/m/CAHoiPjzea6N0zuCi=+f9v_j94nfsy6y8SU7-=bp4=7qw6_i=Rg@mail.gmail.com
On MSVC builds and on back branches that means removing the hardcoded
--verbose setting. On master for Unix that means removing the empty
setting in the global Makefile so that the value can be acquired from
the environment as well as from the make arguments.
Backpatch to 9.4 where we introduced TAP tests
On Unix this path is detected via the use of xml2-config, but that's not
available on Windows. This means that users building with libxml2 will
no longer need to move things around from the standard libxml2
installation for MSVC builds.
Backpatch to all live branches.
Increase from the historical value of 32 to 64. We are up to 31 callers
of CacheRegisterSyscacheCallback() in HEAD, so if they were all to be
exercised in one process that would leave only one slot for add-on modules.
It's probably not possible for that to happen, but still we clearly need
more daylight here. (At some point it might be worth making the array
dynamically resizable; but since we've never heard a complaint of "out of
syscache_callback_list slots" happening in the field, I doubt it's worth
it yet.)
Back-patch as far as 9.4, which is where we increased the companion limit
MAX_RELCACHE_CALLBACKS (cf commit f01d1ae3a). It's not as urgent in
released branches, which have only a couple dozen call sites in core, but
it still seems that somebody might hit the limit before these branches die.
Discussion: https://postgr.es/m/12184.1494450131@sss.pgh.pa.us
Values in a STATISTIC_KIND_RANGE_LENGTH_HISTOGRAM slot are float8,
not of the type of the column the statistics are for.
This bug is at least partly the fault of sloppy specification comments
for get_attstatsslot()/free_attstatsslot(): the type OID they want is that
of the stavalues entries, not of the underlying column. (I double-checked
other callers and they seem to get this right.) Adjust the comments to be
more correct.
Per buildfarm.
Security: CVE-2017-7484
Both views replace the umoptions field with NULL when the user does not
meet qualifications to see it. They used different qualifications, and
pg_user_mappings documented qualifications did not match its implemented
qualifications. Make its documentation and implementation match those
of user_mapping_options. One might argue for stronger qualifications,
but these have long, documented tenure. pg_user_mappings has always
exhibited this problem, so back-patch to 9.2 (all supported versions).
Michael Paquier and Feike Steenbergen. Reviewed by Jeff Janes.
Reported by Andrew Wheelwright.
Security: CVE-2017-7486
Commit 65c3bf19fd moved handling of the,
already then, deprecated requiressl parameter into conninfo_storeval().
The default PGREQUIRESSL environment variable was however lost in the
change resulting in a potentially silent accept of a non-SSL connection
even when set. Its documentation remained. Restore its implementation.
Also amend the documentation to mark PGREQUIRESSL as deprecated for
those not following the link to requiressl. Back-patch to 9.3, where
commit 65c3bf1 first appeared.
Behavior has been more complex when the user provides both deprecated
and non-deprecated settings. Before commit 65c3bf1, libpq operated
according to the first of these found:
requiressl=1
PGREQUIRESSL=1
sslmode=*
PGSSLMODE=*
(Note requiressl=0 didn't override sslmode=*; it would only suppress
PGREQUIRESSL=1 or a previous requiressl=1. PGREQUIRESSL=0 had no effect
whatsoever.) Starting with commit 65c3bf1, libpq ignored PGREQUIRESSL,
and order of precedence changed to this:
last of requiressl=* or sslmode=*
PGSSLMODE=*
Starting now, adopt the following order of precedence:
last of requiressl=* or sslmode=*
PGSSLMODE=*
PGREQUIRESSL=1
This retains the 65c3bf1 behavior for connection strings that contain
both requiressl=* and sslmode=*. It retains the 65c3bf1 change that
either connection string option overrides both environment variables.
For the first time, PGSSLMODE has precedence over PGREQUIRESSL; this
avoids reducing security of "PGREQUIRESSL=1 PGSSLMODE=verify-full"
configurations originating under v9.3 and later.
Daniel Gustafsson
Security: CVE-2017-7485
Some selectivity estimation functions run user-supplied operators over
data obtained from pg_statistic without security checks, which allows
those operators to leak pg_statistic data without having privileges on
the underlying tables. Fix by checking that one of the following is
satisfied: (1) the user has table or column privileges on the table
underlying the pg_statistic data, or (2) the function implementing the
user-supplied operator is leak-proof. If neither is satisfied, planning
will proceed as if there are no statistics available.
At least one of these is satisfied in most cases in practice. The only
situations that are negatively impacted are user-defined or
not-leak-proof operators on a security-barrier view.
Reported-by: Robert Haas <robertmhaas@gmail.com>
Author: Peter Eisentraut <peter_e@gmx.net>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Security: CVE-2017-7484
The upstream IANA code does not guard against null TM_ZONE pointers in this
function, but in our code there is such a check in the other pre-existing
use of t->tm_zone. We do have some places that set pg_tm.tm_zone to NULL.
I'm not entirely sure it's possible to reach strftime with such a value,
but I'm not sure it isn't either, so be safe.
Per Coverity complaint.
Somehow, we'd missed ever doing this. The consequences aren't too
severe: basically, the timezone library would fall back on its hardwired
notion of the DST transition dates to use for a POSIX-style zone name,
rather than obeying US/Eastern which is the intended behavior. The net
effect would only be to obey current US DST law further back than it
ought to apply; so it's not real surprising that nobody noticed.
David Rowley, per report from Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1LC7CaNhRAQ__C3ht1JVrPzaAXXhEJRnR5L6bfYHiLmWw@mail.gmail.com
Fix oversight in commit af2c5aa88: if the shortcut open() doesn't work,
we need to reset fullname[] to be just the name of the toplevel tzdata
directory before we fall through into the pre-existing code. This failed
to be exposed in my (tgl's) testing because the fall-through path is
actually never taken under normal circumstances.
David Rowley, per report from Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1LC7CaNhRAQ__C3ht1JVrPzaAXXhEJRnR5L6bfYHiLmWw@mail.gmail.com
buildDefaultACLCommands() didn't destroy the string buffer created in
certain cases, leading to a memory leak. Fix by destroying the buffer
before returning from the function.
Spotted by Coverity.
Author: Michael Paquier
Back-patch to 9.6 where buildDefaultACLCommands() was added.
When we add the SELECT-privilege based policies to the RLS with check
options (such as for an UPDATE statement, or when we have INSERT ...
RETURNING), we need to be sure and use the 'USING' case if the policy is
actually an 'ALL' policy (which could have both a USING clause and an
independent WITH CHECK clause).
This could result in policies acting differently when built using ALL
(when the ALL had both USING and WITH CHECK clauses) and when building
the policies independently as SELECT and UPDATE policies.
Fix this by adding an explicit boolean to add_with_check_options() to
indicate when the USING policy should be used, even if the policy has
both USING and WITH CHECK policies on it.
Reported by: Rod Taylor
Back-patch to 9.5 where RLS was introduced.
Commit eaba54c20c added support for Tcl 8.6 for configure-supported
platforms after verifying that pltcl works without further changes, but
the MSVC tooling wasn't updated accordingly. Update MSVC to match,
restructuring the code to avoid duplicating the logic for every Tcl
version supported.
Backpatch to all live branches, like eaba54c20c. In 9.4 and previous,
change the patch to use backslashes rather than forward, as in the rest
of the file.
Reported by Paresh More, who also tested the patch I provided.
Discussion: https://postgr.es/m/CAAgiCNGVw3ssBtSi3ZNstrz5k00ax=UV+_ZEHUeW_LMSGL2sew@mail.gmail.com
