pattern-examination heuristic method to purely histogram-driven selectivity at
histogram size 100, we compute both estimates and use a weighted average.
The weight put on the heuristic estimate decreases linearly with histogram
size, dropping to zero for 100 or more histogram entries.
Likewise in ltreeparentsel(). After a patch by Greg Stark, though I
reorganized the logic a bit to give the caller of histogram_selectivity()
more control.
of the generated range condition var >= 'foo' AND var < 'fop' as being less
than what eqsel() would estimate for var = 'foo'. This is intuitively
reasonable and it gets rid of the need for some entirely ad-hoc coding we
formerly used to reject bogus estimates. The basic problem here is that
if the prefix is more than a few characters long, the two boundary values
are too close together to be distinguishable by comparison to the column
histogram, resulting in a selectivity estimate of zero, which is often
not very sane. Change motivated by an example from Peter Eisentraut.
Arguably this is a bug fix, but I'll refrain from back-patching it
for the moment.
the two join variables at both ends: not only trailing rows that need not be
scanned because there cannot be a match on the other side, but initial rows
that will be scanned without possibly having a match. This allows a more
realistic estimate of startup cost to be made, per recent pgsql-performance
discussion. In passing, fix a couple of bugs that had crept into
mergejoinscansel: it was not quite up to speed for the task of estimating
descending-order scans, which is a new requirement in 8.3.
out that it's actually quite likely that a string that is an extension of
the given prefix will sort as larger than the "greater" string our previous
code created. To provide some defense against that, do the comparisons
against a modified string instead of just the bare prefix. We tack on
"Z", "z", "y", or "9", whichever is seen as largest in the current locale.
Testing suggests that this is sufficient at least for cases involving
ASCII data.
make_greater_string() try harder to generate a string that's actually greater
than its input string. Before we just assumed that making a string that was
memcmp-greater was enough, but it is easy to generate examples where this is
not so when the locale is not C. Instead, loop until the relevant comparison
function agrees that the generated string is greater than the input.
Unfortunately this is probably not enough to guarantee that the generated
string is greater than all extensions of the input, so we cannot relax the
restriction to C locale for the LIKE/regex index optimization. But it should
at least improve the odds of getting a useful selectivity estimate in
prefix_selectivity(). Per example from Guillaume Smet.
Backpatch to 8.1, mainly because that's what the complainant is using...
negated-match operators. patternsel had been using the supplied operator as
though it were a positive-match operator, and thus obtaining a wrong result,
which was even more wrong after the caller subtracted it from 1. Seems
cleanest to give patternsel an explicit "negate" argument so that it knows
what's going on. Also install the same factorization scheme for pattern
join selectivity estimators; even though they are just stubs at the
moment, this may keep someone from making the same type of mistake when
they get filled out. Per report from Greg Mullane.
Backpatch to 8.2 --- previous releases do not show the problem because
patternsel() doesn't actually use the operator directly.
the number of rows likely to be produced by a query such as
SELECT * FROM t1 LEFT JOIN t2 USING (key) WHERE t2.key IS NULL;
What this is doing is selecting for t1 rows with no match in t2, and thus
it may produce a significant number of rows even if the t2.key table column
contains no nulls at all. 8.2 thinks the table column's null fraction is
relevant and thus may estimate no rows out, which results in terrible plans
if there are more joins above this one. A proper fix for this will involve
passing much more information about the context of a clause to the selectivity
estimator functions than we ever have. There's no time left to write such a
patch for 8.3, and it wouldn't be back-patchable into 8.2 anyway. Instead,
put in an ad-hoc test to defeat the normal table-stats-based estimation when
an IS NULL test is evaluated at an outer join, and just use a constant
estimate instead --- I went with 0.5 for lack of a better idea. This won't
catch every case but it will catch the typical ways of writing such queries,
and it seems unlikely to make things worse for other queries.
Oleg Bartunov and Teodor Sigaev, but I did a lot of editorializing,
so anything that's broken is probably my fault.
Documentation is nonexistent as yet, but let's land the patch so we can
get some portability testing done.
are mostly excluded by constraints: do the CE test a bit earlier to save
some adjust_appendrel_attrs() work on excluded children, and arrange to
use array indexing rather than rt_fetch() to fetch RTEs in the main body
of the planner. The latter is something I'd wanted to do for awhile anyway,
but seeing list_nth_cell() as 35% of the runtime gets one's attention.
seen by code inspecting the expression. The best way to do this seems
to be to drop the original representation as a function invocation, and
instead make a special expression node type that represents applying
the element-type coercion function to each array element. In this way
the element function is exposed and will be checked for volatility.
Per report from Guillaume Smet.
First, genericcostestimate() was being way too liberal about including
partial-index conditions in its selectivity estimate, resulting in
substantial underestimates for situations such as an indexqual "x = 42"
used with an index on x "WHERE x >= 40 AND x < 50". While the code is
intentionally set up to favor selecting partial indexes when available,
this was too much...
Second, choose_bitmap_and() was likewise easily fooled by cases of this
type, since it would similarly think that the partial index had selectivity
independent of the indexqual.
Fixed by using predicate_implied_by() rather than simple equality checks
to determine redundancy. This is a good deal more expensive but I don't
see much alternative. At least the extra cost is only paid when there's
actually a partial index under consideration.
Per report from Jeff Davis. I'm not going to risk back-patching this,
though.
available information about the typmod of an expression; namely, Const,
ArrayRef, ArrayExpr, and EXPR and ARRAY SubLinks. In the ArrayExpr and
SubLink cases it wasn't really the data structure's fault, but exprTypmod()
being lazy. This seems like a good idea in view of the expected increase in
typmod usage from Teodor's work to allow user-defined types to have typmods.
In particular this responds to the concerns we had about eliminating the
special-purpose hack that exprTypmod() used to have for BPCHAR Consts.
We can now tell whether or not such a Const has been cast to a specific
length, and report or display properly if so.
initdb forced due to changes in stored rules.
Get rid of VARATT_SIZE and VARATT_DATA, which were simply redundant with
VARSIZE and VARDATA, and as a consequence almost no code was using the
longer names. Rename the length fields of struct varlena and various
derived structures to catch anyplace that was accessing them directly;
and clean up various places so caught. In itself this patch doesn't
change any behavior at all, but it is necessary infrastructure if we hope
to play any games with the representation of varlena headers.
Greg Stark and Tom Lane
useless substructure for its RangeTblEntry nodes. (I chose to keep using the
same struct node type and just zero out the link fields for unneeded info,
rather than making a separate ExecRangeTblEntry type --- it seemed too
fragile to have two different rangetable representations.)
Along the way, put subplans into a list in the toplevel PlannedStmt node,
and have SubPlan nodes refer to them by list index instead of direct pointers.
Vadim wanted to do that years ago, but I never understood what he was on about
until now. It makes things a *whole* lot more robust, because we can stop
worrying about duplicate processing of subplans during expression tree
traversals. That's been a constant source of bugs, and it's finally gone.
There are some consequent simplifications yet to be made, like not using
a separate EState for subplans in the executor, but I'll tackle that later.
this code was last gone over, there wasn't really any alternative to
globals because we didn't have the PlannerInfo struct being passed all
through the planner code. Now that we do, we can restructure things
to avoid non-reentrancy. I'm fooling with this because otherwise I'd
have had to add another global variable for the planned compact
range table list.
In this case extractQuery should returns -1 as nentries. This changes
prototype of extractQuery method to use int32* instead of uint32* for
nentries argument.
Based on that gincostestimate may see two corner cases: nothing will be found
or seqscan should be used.
Per proposal at http://archives.postgresql.org/pgsql-hackers/2007-01/msg01581.php
PS tsearch_core patch should be sightly modified to support changes, but I'm
waiting a verdict about reviewing of tsearch_core patch.
versus varchar[]. This oversight probably explains Ryan Holmes' recent
complaint --- he was getting a generic selectivity estimate instead of
anything intelligent.
which I had removed in the first cut of the EquivalenceClass rewrite to
simplify that patch a little. But it's still important --- in a four-way
join problem mergejoinscansel() was eating about 40% of the planning time
according to gprof. Also, improve the EquivalenceClass code to re-use
join RestrictInfos rather than generating fresh ones for each join
considered. This saves some memory space but more importantly improves
the effectiveness of caching planning info in RestrictInfos.
representation of equivalence classes of variables. This is an extensive
rewrite, but it brings a number of benefits:
* planner no longer fails in the presence of "incomplete" operator families
that don't offer operators for every possible combination of datatypes.
* avoid generating and then discarding redundant equality clauses.
* remove bogus assumption that derived equalities always use operators
named "=".
* mergejoins can work with a variety of sort orders (e.g., descending) now,
instead of tying each mergejoinable operator to exactly one sort order.
* better recognition of redundant sort columns.
* can make use of equalities appearing underneath an outer join.
per-column options for btree indexes. The planner's support for this is still
pretty rudimentary; it does not yet know how to plan mergejoins with
nondefault ordering options. The documentation is pretty rudimentary, too.
I'll work on improving that stuff later.
Note incompatible change from prior behavior: ORDER BY ... USING will now be
rejected if the operator is not a less-than or greater-than member of some
btree opclass. This prevents less-than-sane behavior if an operator that
doesn't actually define a proper sort ordering is selected.
form '^(foo)$'. Before, these could never be optimized into indexscans.
The recent changes to make psql and pg_dump generate such patterns (for \d
commands and -t and related switches, respectively) therefore represented
a big performance hit for people with large pg_class catalogs, as seen in
recent gripe from Erik Jones. While at it, be more paranoid about
case-sensitivity checking in multibyte encodings, and fix some other
corner cases in which a regex might be interpreted too liberally.
cases. Operator classes now exist within "operator families". While most
families are equivalent to a single class, related classes can be grouped
into one family to represent the fact that they are semantically compatible.
Cross-type operators are now naturally adjunct parts of a family, without
having to wedge them into a particular opclass as we had done originally.
This commit restructures the catalogs and cleans up enough of the fallout so
that everything still works at least as well as before, but most of the work
needed to actually improve the planner's behavior will come later. Also,
there are not yet CREATE/DROP/ALTER OPERATOR FAMILY commands; the only way
to create a new family right now is to allow CREATE OPERATOR CLASS to make
one by default. I owe some more documentation work, too. But that can all
be done in smaller pieces once this infrastructure is in place.
are all in new-in-8.2 logic associated with indexability of ScalarArrayOpExpr
(IN-clauses) or amortization of indexscan costs across repeated indexscans
on the inside of a nestloop. In particular:
Fix some logic errors in the estimation for multiple scans induced by a
ScalarArrayOpExpr indexqual.
Include a small cost component in bitmap index scans to reflect the costs of
manipulating the bitmap itself; this is mainly to prevent a bitmap scan from
appearing to have the same cost as a plain indexscan for fetching a single
tuple.
Also add a per-index-scan-startup CPU cost component; while prior releases
were clearly too pessimistic about the cost of repeated indexscans, the
original 8.2 coding allowed the cost of an indexscan to effectively go to zero
if repeated often enough, which is overly optimistic.
Pay some attention to index correlation when estimating costs for a nestloop
inner indexscan: this is significant when the plan fetches multiple heap
tuples per iteration, since high correlation means those tuples are probably
on the same or adjacent heap pages.
is a large enough histogram, it will use the number of matches in the
histogram to derive a selectivity estimate, rather than the admittedly
pretty bogus heuristics involving examining the pattern contents. I set
'large enough' at 100, but perhaps we should change that later. Also
apply the same technique in contrib/ltree's <@ and @> estimator. Per
discussion with Stefan Kaltenbrunner and Matteo Beccati.
tables in the query compete for cache space, not just the one we are
currently costing an indexscan for. This seems more realistic, and it
definitely will help in examples recently exhibited by Stefan
Kaltenbrunner. To get the total size of all the tables involved, we must
tweak the handling of 'append relations' a bit --- formerly we looked up
information about the child tables on-the-fly during set_append_rel_pathlist,
but it needs to be done before we start doing any cost estimation, so
push it into the add_base_rels_to_query scan.
thinking that indexes of different sizes are equally attractive. Per
gripe from Jim Nasby. (I remain unconvinced that there's such a problem
in existing releases, but CVS HEAD definitely has got a problem because
of its new count-only-leaf-pages approach to indexscan costing.)
ScalarArrayOpExpr index quals: we were estimating the right total
number of rows returned, but treating the index-access part of the
cost as if a single scan were fetching that many consecutive index
tuples. Actually we should treat it as a multiple indexscan, and
if there are enough of 'em the Mackert-Lohman discount should kick in.
that the Mackert-Lohmann formula applies across all the repetitions of the
nestloop, not just each scan independently. We use the M-L formula to
estimate the number of pages fetched from the index as well as from the table;
that isn't what it was designed for, but it seems reasonably applicable
anyway. This makes large numbers of repetitions look much cheaper than
before, which accords with many reports we've received of overestimation
of the cost of a nestloop. Also, change the index access cost model to
charge random_page_cost per index leaf page touched, while explicitly
not counting anything for access to metapage or upper tree pages. This
may all need tweaking after we get some field experience, but in simple
tests it seems to be giving saner results than before. The main thing
is to get the infrastructure in place to let cost_index() and amcostestimate
functions take repeated scans into account at all. Per my recent proposal.
Note: this patch changes pg_proc.h, but I did not force initdb because
the changes are basically cosmetic --- the system does not look into
pg_proc to decide how to call an index amcostestimate function, and
there's no way to call such a function from SQL at all.
assumed that a sequential page fetch has cost 1.0. This patch doesn't
in itself change the system's behavior at all, but it opens the door to
people adopting other units of measurement for EXPLAIN costs. Also, if
we ever decide it's worth inventing per-tablespace access cost settings,
this change provides a workable intellectual framework for that.
the union of its child relations as well. This might have been a good idea
when it was originally coded, but it's a fatally bad idea when inheritance is
being used for partitioning. It's better to have no stats at all than
completely misleading stats. Per report from Mark Liberman.
The bug arguably exists all the way back, but I've only patched HEAD and 8.1
because we weren't particularly trying to support partitioning before 8.1.
Eventually we ought to look at deriving union statistics instead of just
punting, but for now the drop kick looks good.
cases. This was not needed in the existing uses within selfuncs.c, but if
we're gonna export it for general use, the extra generality seems helpful.
Motivated by looking at ltree example.
of rejecting palloc(0). Also, tweak like_selectivity() to avoid assuming
the presented pattern is nonempty; although that assumption is valid,
it doesn't really help much, and the new coding is more correct anyway
since it properly handles redundant wildcards. In combination these
changes should eliminate a Coverity warning noted by Martijn.
listed in the column's most-common-values statistics entry. This gives
us an exact selectivity result for the portion of the column population
represented by the MCV list, which can be a big leg up in accuracy if
that's a large fraction of the population. The heuristics involving
pattern contents and prefix are applied only to the part of the population
not included in the MCV list.
qualification when the underlying operator is indexable and useOr is true.
That is, indexkey op ANY (ARRAY[...]) is effectively translated into an
OR combination of one indexscan for each array element. This only works
for bitmap index scans, of course, since regular indexscans no longer
support OR'ing of scans. There are still some loose ends to clean up
before changing 'x IN (list)' to translate as a ScalarArrayOpExpr;
for instance predtest.c ought to be taught about it. But this gets the
basic functionality in place.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
valid type information if they are asked to fetch the values part of a
pg_statistic slot; these arguments are unneeded if fetching only the
numbers part. Use this to save a catcache lookup in btcostestimate,
which is looking like a bit of a hotspot in recent profiling. Not a
big savings, but since it's essentially free, might as well do it.
24 hours. This is very helpful for daylight savings time:
select '2005-05-03 00:00:00 EST'::timestamp with time zone + '24 hours';
?column?
----------------------
2005-05-04 01:00:00-04
select '2005-05-03 00:00:00 EST'::timestamp with time zone + '1 day';
?column?
----------------------
2005-05-04 01:00:00-04
Michael Glaesemann
current time: provide a GetCurrentTimestamp() function that returns
current time in the form of a TimestampTz, instead of separate time_t
and microseconds fields. This is what all the callers really want
anyway, and it eliminates low-level dependencies on AbsoluteTime,
which is a deprecated datatype that will have to disappear eventually.
nonconsecutive columns of a multicolumn index, as per discussion around
mid-May (pghackers thread "Best way to scan on-disk bitmaps"). This
turns out to require only minimal changes in btree, and so far as I can
see none at all in GiST. btcostestimate did need some work, but its
original assumption that index selectivity == heap selectivity was
quite bogus even before this.
a new PlannerInfo struct, which is passed around instead of the bare
Query in all the planning code. This commit is essentially just a
code-beautification exercise, but it does open the door to making
larger changes to the planner data structures without having to muck
with the widely-known Query struct.
node, as this behavior is now better done as a bitmap OR indexscan.
This allows considerable simplification in nodeIndexscan.c itself as
well as several planner modules concerned with indexscan plan generation.
Also we can improve the sharing of code between regular and bitmap
indexscans, since they are now working with nigh-identical Plan nodes.
indexes. Replace all heap_openr and index_openr calls by heap_open
and index_open. Remove runtime lookups of catalog OID numbers in
various places. Remove relcache's support for looking up system
catalogs by name. Bulky but mostly very boring patch ...
cases with binary-compatible relabeling. My first try was implicitly
assuming that all operators scalarineqsel is used for have binary-
compatible datatypes on both sides ... which is very wrong of course.
Per report from Michael Fuhr.
access: define new index access method functions 'amgetmulti' that can
fetch multiple TIDs per call. (The functions exist but are totally
untested as yet.) Since I was modifying pg_am anyway, remove the
no-longer-needed 'rel' parameter from amcostestimate functions, and
also remove the vestigial amowner column that was creating useless
work for Alvaro's shared-object-dependencies project.
Initdb forced due to changes in pg_am.
binary-compatible relabeling of one or both operands. examine_variable
should avoid stripping RelabelType from non-variable expressions, so that
they will continue to have the correct type; and convert_to_scalar should
just use that type and ignore the other input type. This isn't perfect
but it beats failing entirely. Per example from Michael Fuhr.
on-the-fly, and thereby avoid blowing out memory when the planner has
underestimated the hash table size. Hash join will now obey the
work_mem limit with some faithfulness. Per my recent proposal
(hash aggregate part isn't done yet though).
estimate to less than the number of values estimated for any one grouping
Var, as suggested by Manfred. This is intuitively right, and what's
more it puts the plan choices in the subselect regression test back the
way they were before ...
clamp the estimated number of groups to table row count over 10, instead
of table row count; this reflects a heuristic that people probably won't
group over a near-unique set of columns, and the knowledge that we don't
currently have any way to estimate the correlation of the columns better
than guessing. This change creates a trivial plan change in one of the
regression tests.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
escapes --- they aren't simply quoted characters. Problem noted by
Antti Salmela. Also fix problem with incorrect handling of multibyte
characters when followed by a quantifier.
estimates when combining the estimates for a range query. As pointed out
by Miquel van Smoorenburg, the existing check for an impossible combined
result would quite possibly fail to detect one default and one non-default
input. It seems better to use the default range query estimate in such
cases. To do so, add a check for an estimate of exactly DEFAULT_INEQ_SEL.
This is a bit ugly because it introduces additional coupling between
clauselist_selectivity and scalarltsel/scalargtsel, but it's not like
there wasn't plenty already...
until Bind is received, so that actual parameter values are visible to the
planner. Make use of the parameter values for estimation purposes (but
don't fold them into the actual plan). This buys back most of the
potential loss of plan quality that ensues from using out-of-line
parameters instead of putting literal values right into the query text.
This patch creates a notion of constant-folding expressions 'for
estimation purposes only', in which case we can be more aggressive than
the normal eval_const_expressions() logic can be. Right now the only
difference in behavior is inserting bound values for Params, but it will
be interesting to look at other possibilities. One that we've seen
come up repeatedly is reducing now() and related functions to current
values, so that queries like ... WHERE timestampcol > now() - '1 day'
have some chance of being planned effectively.
Oliver Jowett, with some kibitzing from Tom Lane.
In the past, we used a 'Lispy' linked list implementation: a "list" was
merely a pointer to the head node of the list. The problem with that
design is that it makes lappend() and length() linear time. This patch
fixes that problem (and others) by maintaining a count of the list
length and a pointer to the tail node along with each head node pointer.
A "list" is now a pointer to a structure containing some meta-data
about the list; the head and tail pointers in that structure refer
to ListCell structures that maintain the actual linked list of nodes.
The function names of the list API have also been changed to, I hope,
be more logically consistent. By default, the old function names are
still available; they will be disabled-by-default once the rest of
the tree has been updated to use the new API names.
corner cases that could stand improvement, but it does all the basic
stuff. A byproduct is that the selectivity routines are no longer
constrained to working on simple Vars; we might in future be able to
improve the behavior for subexpressions that don't match indexes.
a run-time key (that is, a nonconstant expression compared to the index
variable), the key is evaluated just once per scan, but we were charging
costs as though it were evaluated once per visited index entry.
pointer type when it is not necessary to do so.
For future reference, casting NULL to a pointer type is only necessary
when (a) invoking a function AND either (b) the function has no prototype
OR (c) the function is a varargs function.
with index qual clauses in the Path representation. This saves a little
work during createplan and (probably more importantly) allows reuse of
cached selectivity estimates during indexscan planning. Also fix latent
bug: wrong plan would have been generated for a 'special operator' used
in a nestloop-inner-indexscan join qual, because the special operator
would not have gotten into the list of quals to recheck. This bug is
only latent because at present the special-operator code could never
trigger on a join qual, but sooner or later someone will want to do it.
conditions is overkill; set_union() does the job about as well, and
much more efficiently. Furthermore this avoids assuming that
canonicalize_qual() will check for duplicate clauses at all, which
it may not always do.
about whether it is applied before or after eval_const_expressions().
I believe there were some corner cases where the system would fail to
recognize that a partial index is applicable because of the previous
inconsistency. Store normal rather than 'implicit AND' representations
of constraints and index predicates in the catalogs.
initdb forced due to representation change of constraints/predicates.
pghackers proposal of 8-Nov. All the existing cross-type comparison
operators (int2/int4/int8 and float4/float8) have appropriate support.
The original proposal of storing the right-hand-side datatype as part of
the primary key for pg_amop and pg_amproc got modified a bit in the event;
it is easier to store zero as the 'default' case and only store a nonzero
when the operator is actually cross-type. Along the way, remove the
long-since-defunct bigbox_ops operator class.
of an index can now be a computed expression instead of a simple variable.
Restrictions on expressions are the same as for predicates (only immutable
functions, no sub-selects). This fixes problems recently introduced with
inlining SQL functions, because the inlining transformation is applied to
both expression trees so the planner can still match them up. Along the
way, improve efficiency of handling index predicates (both predicates and
index expressions are now cached by the relcache) and fix 7.3 oversight
that didn't record dependencies of predicate expressions.
blanks, in hopes of reducing the surprise factor for newbies. Remove
redundant operators for VARCHAR (it depends wholly on TEXT operations now).
Clean up resolution of ambiguous operators/functions to avoid surprising
choices for domains: domains are treated as equivalent to their base types
and binary-coercibility is no longer considered a preference item when
choosing among multiple operators/functions. IsBinaryCoercible now correctly
reflects the notion that you need *only* relabel the type to get from type
A to type B: that is, a domain is binary-coercible to its base type, but
not vice versa. Various marginal cleanup, including merging the essentially
duplicate resolution code in parse_func.c and parse_oper.c. Improve opr_sanity
regression test to understand about binary compatibility (using pg_cast),
and fix a couple of small errors in the catalogs revealed thereby.
Restructure "special operator" handling to fetch operators via index opclasses
rather than hardwiring assumptions about names (cleans up the pattern_ops
stuff a little).
account for NULLs; in hindsight this is obvious since the code for
the MCV-lists case would reduce to this when there are zero entries
in both lists. Per example from Alec Mitchell.
them as arrays of the internal datatype. This requires treating the
stavalues columns as 'anyarray' rather than 'text[]', which is not 100%
kosher but seems to work fine for the purposes we need for pg_statistic.
Perhaps in the future 'anyarray' will be allowed more generally.
passed to join selectivity estimators. Make use of this in eqjoinsel
to derive non-bogus selectivity for IN clauses. Further tweaking of
cost estimation for IN.
initdb forced because of pg_proc.h changes.
Try to model the effect of rescanning input tuples in mergejoins;
account for JOIN_IN short-circuiting where appropriate. Also, recognize
that mergejoin and hashjoin clauses may now be more than single operator
calls, so we have to charge appropriate execution costs.
of known-equal expressions includes any constant expressions (including
Params from outer queries), we actively suppress any 'var = var'
clauses that are or could be deduced from the set, generating only the
deducible 'var = const' clauses instead. The idea here is to push down
the restrictions implied by the equality set to base relations whenever
possible. Once we have applied the 'var = const' clauses, the 'var = var'
clauses are redundant, and should be suppressed both to save work at
execution and to avoid double-counting restrictivity.
There are two implementation techniques: the executor understands a new
JOIN_IN jointype, which emits at most one matching row per left-hand row,
or the result of the IN's sub-select can be fed through a DISTINCT filter
and then joined as an ordinary relation.
Along the way, some minor code cleanup in the optimizer; notably, break
out most of the jointree-rearrangement preprocessing in planner.c and
put it in a new file prep/prepjointree.c.
containing a volatile function), rather than only on 'Var = Var' clauses
as before. This makes it practical to do flatten_join_alias_vars at the
start of planning, which in turn eliminates a bunch of klugery inside the
planner to deal with alias vars. As a free side effect, we now detect
implied equality of non-Var expressions; for example in
SELECT ... WHERE a.x = b.y and b.y = 42
we will deduce a.x = 42 and use that as a restriction qual on a. Also,
we can remove the restriction introduced 12/5/02 to prevent pullup of
subqueries whose targetlists contain sublinks.
Still TODO: make statistical estimation routines in selfuncs.c and costsize.c
smarter about expressions that are more complex than plain Vars. The need
for this is considerably greater now that we have to be able to estimate
the suitability of merge and hash join techniques on such expressions.
costs for expression evaluation, not only per-tuple cost as before.
This extension is needed in order to deal realistically with hashed or
materialized sub-selects.
so that all executable expression nodes inherit from a common supertype
Expr. This is somewhat of an exercise in code purity rather than any
real functional advance, but getting rid of the extra Oper or Func node
formerly used in each operator or function call should provide at least
a little space and speed improvement.
initdb forced by changes in stored-rules representation.
of groups produced by GROUP BY. This improves the accuracy of planning
estimates for grouped subselects, and is needed to check whether a
hashed aggregation plan risks memory overflow.
postgres.h or c.h includes a system header (such as stdio.h or
stdlib.h), there's no need to specifically include it in any of the .c
files in the backend.
Neil Conway
Ray Ontko 28-June-02. Also, fix prefix_selectivity for NAME lefthand
variables (it was bogusly assuming binary compatibility), and adjust
make_greater_string() to not call pg_mbcliplen() with invalid multibyte
data (this last per bug report that I can't find at the moment, but it
was in July '02).
> I see in your recent bytea-LIKE patch
>
> if (datatype != BYTEAOID && pg_database_encoding_max_length()
> 1)
> len = pg_mbcliplen((const unsigned char *) workstr, len,
len - 1);
> else
> len -= -1;
>
> Surely there's one too many minus signs in that last?
Joe Conway
> src/backend/optimizer/path/indxpath.c; see the "special indexable
> operators" stuff near the bottom of that file. (It's a bit of a crock
> that this code is hardwired there, and not somehow accessed through a
> system catalog, but it's what we've got at the moment.)
The attached patch re-enables a bytea right hand argument (as compared
to a text right hand argument), and enables index usage, for bytea LIKE
Joe Conway
with OPAQUE, as per recent pghackers discussion. I still want to do some
more work on the 'cstring' pseudo-type, but I'm going to commit the bulk
of the changes now before the tree starts shifting under me ...
per pghackers discussion. Add some more typsanity tests, and clean
up some problems exposed thereby (broken or missing array types for
some built-in types). Also, clean up loose ends from unknownin/out
patch.
Use "--enable-integer-datetimes" in configuration to use this rather
than the original float8 storage. I would recommend the integer-based
storage for any platform on which it is available. We perhaps should
make this the default for the production release.
Change timezone(timestamptz) results to return timestamp rather than
a character string. Formerly, we didn't have a way to represent
timestamps with an explicit time zone other than freezing the info into
a string. Now, we can reasonably omit the explicit time zone from the
result and return a timestamp with values appropriate for the specified
time zone. Much cleaner, and if you need the time zone in the result
you can put it into a character string pretty easily anyway.
Allow fractional seconds in date/time types even for dates prior to 1BC.
Limit timestamp data types to 6 decimal places of precision. Just right
for a micro-second storage of int8 date/time types, and reduces the
number of places ad-hoc rounding was occuring for the float8-based types.
Use lookup tables for precision/rounding calculations for timestamp and
interval types. Formerly used pow() to calculate the desired value but
with a more limited range there is no reason to not type in a lookup
table. Should be *much* better performance, though formerly there were
some optimizations to help minimize the number of times pow() was called.
Define a HAVE_INT64_TIMESTAMP variable. Based on the configure option
"--enable-integer-datetimes" and the existing internal INT64_IS_BUSTED.
Add explicit date/interval operators and functions for addition and
subtraction. Formerly relied on implicit type promotion from date to
timestamp with time zone.
Change timezone conversion functions for the timetz type from "timetz()"
to "timezone()". This is consistant with other time zone coersion
functions for other types.
Bump the catalog version to 200204201.
Fix up regression tests to reflect changes in fractional seconds
representation for date/times in BC eras.
All regression tests pass on my Linux box.
qualified operator names directly, for example CREATE OPERATOR myschema.+
( ... ). To qualify an operator name in an expression you need to write
OPERATOR(myschema.+) (thanks to Peter for suggesting an escape hatch).
I also took advantage of having to reformat pg_operator to fix something
that'd been bugging me for a while: mergejoinable operators should have
explicit links to the associated cross-data-type comparison operators,
rather than hardwiring an assumption that they are named < and >.
now just below FATAL in server_min_messages. Added more text to
highlight ordering difference between it and client_min_messages.
---------------------------------------------------------------------------
REALLYFATAL => PANIC
STOP => PANIC
New INFO level the prints to client by default
New LOG level the prints to server log by default
Cause VACUUM information to print only to the client
NOTICE => INFO where purely information messages are sent
DEBUG => LOG for purely server status messages
DEBUG removed, kept as backward compatible
DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1 added
DebugLvl removed in favor of new DEBUG[1-5] symbols
New server_min_messages GUC parameter with values:
DEBUG[5-1], INFO, NOTICE, ERROR, LOG, FATAL, PANIC
New client_min_messages GUC parameter with values:
DEBUG[5-1], LOG, INFO, NOTICE, ERROR, FATAL, PANIC
Server startup now logged with LOG instead of DEBUG
Remove debug_level GUC parameter
elog() numbers now start at 10
Add test to print error message if older elog() values are passed to elog()
Bootstrap mode now has a -d that requires an argument, like postmaster
both input streams to the end. If one variable's range is much less
than the other, an indexscan-based merge can win by not scanning all
of the other table. Per example from Reinhard Max.
>
> 1. Now outputs '\\' instead of '\134' when using encode(bytea, 'escape')
> Note that I ended up leaving \0 as \000 so that there are no ambiguities
> when decoding something like, for example, \0123.
>
> 2. Fixed bug in byteain which allowed input values which were not valid
> octals (e.g. \789), to be parsed as if they were octals.
>
> Joe
>
Here's rev 2 of the bytea string support patch. Changes:
1. Added missing declaration for MatchBytea function
2. Added PQescapeBytea to fe-exec.c
3. Applies cleanly on cvs tip from this afternoon
I'm hoping that someone can review/approve/apply this before beta starts, so
I guess I'd vote (not that it counts for much) to delay beta a few days :-)
Joe Conway
Note: I didn't force an initdb, figuring that one today was enough.
However, there is a new function in pg_proc.h, and pg_dump won't be
able to dump partial indexes until you add that function.
IS TRUE, etc, with some degree of verisimilitude. Split out
selectivity support functions from builtins.h into a new header
file selfuncs.h, so as to reduce the number of header files builtins.h
must depend on. Fix a few missing inclusions exposed thereby.
From Joe Conway, with some kibitzing from Tom Lane.
of costsize.c routines to pass Query root, so that costsize can figure
more things out by itself and not be so dependent on its callers to tell
it everything it needs to know. Use selectivity of hash or merge clause
to estimate number of tuples processed internally in these joins
(this is more useful than it would've been before, since eqjoinsel is
somewhat more accurate than before).
create_index_paths are not immediately discarded, but are available for
subsequent planner work. This allows avoiding redundant syscache lookups
in several places. Change interface to operator selectivity estimation
procedures to allow faster and more flexible estimation.
Initdb forced due to change of pg_proc entries for selectivity functions!
a separate statement (though it can still be invoked as part of VACUUM, too).
pg_statistic redesigned to be more flexible about what statistics are
stored. ANALYZE now collects a list of several of the most common values,
not just one, plus a histogram (not just the min and max values). Random
sampling is used to make the process reasonably fast even on very large
tables. The number of values and histogram bins collected is now
user-settable via an ALTER TABLE command.
There is more still to do; the new stats are not being used everywhere
they could be in the planner. But the remaining changes for this project
should be localized, and the behavior is already better than before.
A not-very-related change is that sorting now makes use of btree comparison
routines if it can find one, rather than invoking '<' twice.
re-adopt these settings at every postmaster or standalone-backend startup.
This should fix problems with indexes becoming corrupt due to failure to
provide consistent locale environment for postmaster at all times. Also,
refuse to start up a non-locale-enabled compilation in a database originally
initdb'd with a non-C locale. Suppress LIKE index optimization if locale
is not "C" or "POSIX" (are there any other locales where it's safe?).
Issue NOTICE during initdb if selected locale disables LIKE optimization.
maintained for each cache entry. A cache entry will not be freed until
the matching ReleaseSysCache call has been executed. This eliminates
worries about cache entries getting dropped while still in use. See
my posting to pg-hackers of even date for more info.
result, in fact nearly the opposite of what it should, because it
was passing the not-equal operator to eqsel() which would use it to
compare the value against the most common value in the column, and
of course obtain the wrong result therefrom. Must pass the equality
operator to eqsel() instead. Fortunately that's easy to get from
the oprnegate link.
I did not force. I marked numeric as compressable-but-not-move-off-able,
partly to test that storage mode and partly because I've got doubts
that numerics are large enough to need external storage.
we'll get there one day.
Use `cat' to create aclocal.m4, not `aclocal'. Some people don't
have automake installed.
Only run the autoconf rule in the top-level GNUmakefile if the
invoker specified `make configure', don't run it automatically
because of CVS timestamp skew.
--- ie, they're only called for side-effects. Add a PG_RETURN_VOID()
macro and use it where appropriate. This probably doesn't change the
machine code by a single bit ... it's just for documentation.
inputs have been converted to newstyle. This should go a long way towards
fixing our portability problems with platforms where char and short
parameters are passed differently from int-width parameters. Still
more to do for the Alpha port however.
key call sites are changed, but most called functions are still oldstyle.
An exception is that the PL managers are updated (so, for example, NULL
handling now behaves as expected in plperl and plpgsql functions).
NOTE initdb is forced due to added column in pg_proc.
other than the most common value in a column. We had had 0.5, make it
0.1 to make it more likely that an indexscan will be chosen. Really
need better statistics instead, but this should stem the bleeding
meanwhile ...
(LIKE and regexp matches). These are not yet referenced in pg_operator,
so by default the system will continue to use eqsel/neqsel.
Also, tweak convert_to_scalar() logic so that common prefixes of strings
are stripped off, allowing better accuracy when all strings in a table
share a common prefix.
to next integer. Previously, if selectivity was small, we could compute
very tiny scan cost on the basis of estimating that only 0.001 tuple
would be fetched, which is silly. This naturally led to some rather
silly plans...
accesses versus sequential accesses, a (very crude) estimate of the
effects of caching on random page accesses, and cost to evaluate WHERE-
clause expressions. Export critical parameters for this model as SET
variables. Also, create SET variables for the planner's enable flags
(enable_seqscan, enable_indexscan, etc) so that these can be controlled
more conveniently than via PGOPTIONS.
Planner now estimates both startup cost (cost before retrieving
first tuple) and total cost of each path, so it can optimize queries
with LIMIT on a reasonable basis by interpolating between these costs.
Same facility is a win for EXISTS(...) subqueries and some other cases.
Redesign pathkey representation to achieve a major speedup in planning
(I saw as much as 5X on a 10-way join); also minor changes in planner
to reduce memory consumption by recycling discarded Path nodes and
not constructing unnecessary lists.
Minor cleanups to display more-plausible costs in some cases in
EXPLAIN output.
Initdb forced by change in interface to index cost estimation
functions.
(ie, WHERE x > lowbound AND x < highbound). It's not very bright yet
but it does something useful. Also, rename intltsel/intgtsel to
scalarltsel/scalargtsel to reflect usage better. Extend convert_to_scalar
to do something a little bit useful with string data types. Still need
to make it do something with date/time datatypes, but I'll wait for
Thomas's datetime unification dust to settle first. Eventually the
routine ought not have any type-specific knowledge at all; it ought to
be calling a type-dependent routine found via a pg_type column; but
that's a task for another day.
an attribute of a tuple previously fetched with SearchSysCacheTuple.
This avoids a lot of redundant cache lookups, particularly in selfuncs.c.
Also, remove SearchSysCacheStruct, which was unused and grotty.
pghackers discussion of 5-Jan-2000. The amopselect and amopnpages
estimators are gone, and in their place is a per-AM amcostestimate
procedure (linked to from pg_am, not pg_amop).
functions, which would lead to trouble with datatypes that paid attention
to the typelem or typmod parameters to these functions. In particular,
incorrect code in pg_aggregate.c explains the platform-specific failures
that have been reported in NUMERIC avg().
Make all system indexes unique.
Make all cache loads use system indexes.
Rename *rel to *relid in inheritance tables.
Rename cache names to be clearer.
additional argument specifying the kind of lock to acquire/release (or
'NoLock' to do no lock processing). Ensure that all relations are locked
with some appropriate lock level before being examined --- this ensures
that relevant shared-inval messages have been processed and should prevent
problems caused by concurrent VACUUM. Fix several bugs having to do with
mismatched increment/decrement of relation ref count and mismatched
heap_open/close (which amounts to the same thing). A bogus ref count on
a relation doesn't matter much *unless* a SI Inval message happens to
arrive at the wrong time, which is probably why we got away with this
sloppiness for so long. Repair missing grab of AccessExclusiveLock in
DROP TABLE, ALTER/RENAME TABLE, etc, as noted by Hiroshi.
Recommend 'make clean all' after pulling this update; I modified the
Relation struct layout slightly.
Will post further discussion to pghackers list shortly.
was rejecting negative attnums as bogus, which of course they are not.
Add code to get_attdisbursion to produce a useful value for OID attribute,
since VACUUM does not store stats for system attributes.
Also, repair bug that's been in eqjoinsel for a long time: it was taking
the max of the two columns' disbursions, whereas it should use the min.
(it should just call the given operator, not look up an = operator).
Fix intltsel() so that all numeric data types are converted to double
before trying to estimate where the given comparison value is in the
known range of column values. intltsel() still needs work, or replacement,
for non-numeric data types ... but for nonintegral numeric types it
should now be delivering reasonable estimates.
neqsel now behave as per my suggestions in pghackers a few days ago.
selectivity for < > <= >= should work OK for integral types as well, but
still need work for nonintegral types. Since these routines have never
actually executed before :-(, this may result in some significant changes
in the optimizer's choices of execution plans. Let me know if you see
any serious misbehavior.
CAUTION: THESE CHANGES REQUIRE INITDB. pg_statistic table has changed.
no longer returns buffer pointer, can be gotten from scan;
descriptor; bootstrap can create multi-key indexes;
pg_procname index now is multi-key index; oidint2, oidint4, oidname
are gone (must be removed from regression tests); use System Cache
rather than sequential scan in many places; heap_modifytuple no
longer takes buffer parameter; remove unused buffer parameter in
a few other functions; oid8 is not index-able; remove some use of
single-character variable names; cleanup Buffer variables usage
and scan descriptor looping; cleaned up allocation and freeing of
tuples; 18k lines of diff;
Tom Lane
Bruce Momjian
Magnus Hagander
Teodor Sigaev
PostgreSQL Daemon
Neil Conway
Joe Conway
Peter Eisentraut
Tatsuo Ishii
Thomas G. Lockhart
Hiroshi Inoue
Vadim B. Mikheev
Marc G. Fournier