pg_relcheck is gone; CHECK, UNIQUE, PRIMARY KEY, and FOREIGN KEY
constraints all have real live entries in pg_constraint. pg_depend
exists, and RESTRICT/CASCADE options work on most kinds of DROP;
however, pg_depend is not yet very well populated with dependencies.
(Most of the ones that are present at this point just replace formerly
hardwired associations, such as the implicit drop of a relation's pg_type
entry when the relation is dropped.) Need to add more logic to create
dependency entries, improve pg_dump to dump constraints in place of
indexes and triggers, and add some regression tests.
This is the first cut toward CREATE CONVERSION/DROP CONVERSION implementaion.
The commands can now add/remove tuples to the new pg_conversion system
catalog, but that's all. Still need work to make them actually working.
Documentations, regression tests also need work.
are managed as per request.
Moved from merging with table attributes to applying themselves during
coerce_type() and coerce_type_typmod.
Regression tests altered to test the cast() scenarios.
Rod Taylor
Reused the Expr node to hold DISTINCT which strongly resembles
the existing OP info. Define DISTINCT_EXPR which strongly resembles
the existing OPER_EXPR opType, but with handling for NULLs required
by SQL99.
We have explicit support for single-element DISTINCT comparisons
all the way through to the executor. But, multi-element DISTINCTs
are handled by expanding into a comparison tree in gram.y as is done for
other row comparisons. Per discussions, it might be desirable to move
this into one or more purpose-built nodes to be handled in the backend.
Define the optional ROW keyword and token per SQL99.
This allows single-element row constructs, which were formerly disallowed
due to shift/reduce conflicts with parenthesized a_expr clauses.
Define the SQL99 TREAT() function. Currently, use as a synonym for CAST().
two small changes to the API since last patch, which hopefully completes
the decoupling of composite function support from SRF specific support.
Joe Conway
Second cut attached. This one just adds a boolean option to the existing
function to indicate that implicit schemas are to be included (or not).
I remembered the docs as well this time :-)
Dave Page
HeapTupleHeaderData in setter and getter macros called
HeapTupleHeaderGetXmin, HeapTupleHeaderSetXmin etc.
It also introduces a "virtual" field xvac by defining
HeapTupleHeaderGetXvac and HeapTupleHeaderSetXvac. Xvac is used by
VACUUM, in fact it is stored in t_cmin.
Manfred Koizar
Will optimize the case for repeated calls for the same expression,
which seems to be the most common case. Formerly, always searched
from the first entry.
May want to look at the least-recently-used algorithm to make sure it
is identifying the right slots to reclaim. Seems silly to do math when
it seems that we could simply use an incrementing counter...
Implement SQL99 SIMILAR TO as a synonym for our existing operator "~".
Implement SQL99 regular expression SUBSTRING(string FROM pat FOR escape).
Extend the definition to make the FOR clause optional.
Define textregexsubstr() to actually implement this feature.
Update the regression test to include these new string features.
All tests pass.
Rename the regular expression support routines from "pg95_xxx" to "pg_xxx".
Define CREATE CHARACTER SET in the parser per SQL99. No implementation yet.
> Changes to avoid collisions with WIN32 & MFC names...
> 1. Renamed:
> a. PROC => PGPROC
> b. GetUserName() => GetUserNameFromId()
> c. GetCurrentTime() => GetCurrentDateTime()
> d. IGNORE => IGNORE_DTF in include/utils/datetime.h & utils/adt/datetim
>
> 2. Added _P to some lex/yacc tokens:
> CONST, CHAR, DELETE, FLOAT, GROUP, IN, OUT
Jan
precision storage format. Previously applied the same math as used for the
64-bit integer storage format case, which was wrong.
Problem introduced recently when the 64-bit storage format was
implemented.
transaction, so as to avoid returning them out of the index AM. Saves
repeated heap_fetch operations on frequently-updated rows. Also detect
queries on unique keys (equality to all columns of a unique index), and
don't bother continuing scan once we have found first match.
Killing is implemented in the btree and hash AMs, but not yet in rtree
or gist, because there isn't an equally convenient place to do it in
those AMs (the outer amgetnext routine can't do it without re-pinning
the index page).
Did some small cleanup on APIs of HeapTupleSatisfies, heap_fetch, and
index_insert to make this a little easier.
function body (and other properties) as a function in the language
is created. This generalizes ad hoc code that already existed for
the built-in languages.
The validation now happens after the pg_proc tuple of the new function
is created, so it is possible to define recursive SQL functions.
Add some regression test cases that cover bogus function definition
attempts.
in snapshots, per my proposal of a few days ago. Also, tweak heapam.c
routines (heap_insert, heap_update, heap_delete, heap_mark4update) to
be passed the command ID to use, instead of doing GetCurrentCommandID.
For catalog updates they'll still get passed current command ID, but
for updates generated from the main executor they'll get passed the
command ID saved in the snapshot the query is using. This should fix
some corner cases associated with functions and triggers that advance
current command ID while an outer query is still in progress.
yesterday's proposal to pghackers. Also remove unnecessary parameters
to heap_beginscan, heap_rescan. I modified pg_proc.h to reflect the
new numbers of parameters for the AM interface routines, but did not
force an initdb because nothing actually looks at those fields.
allows the example in the CREATE SCHEMA ref page to actually work now.
Also, clean up when the transaction that initially creates a temp-table
namespace is later aborted. Simplify internal representation of search
path by folding special cases into the main list.
GUC support. It's now possible to set datestyle, timezone, and
client_encoding from postgresql.conf and per-database or per-user
settings. Also, implement rollback of SET commands that occur in a
transaction that later fails. Create a SET LOCAL var = value syntax
that sets the variable only for the duration of the current transaction.
All per previous discussions in pghackers.
is actively dangerous, per bug report from Ewald Geschwinde 14-May-02,
and several of the rest look suspicious to me. Since there is no longer
any significant value in retail pfree's in these functions, just get
rid of all of them for safety's sake.
returns-set boolean field in Func and Oper nodes. This allows cleaner,
more reliable tests for expressions returning sets in the planner and
parser. For example, a WHERE clause returning a set is now detected
and complained of in the parser, not only at runtime.
some kibitzing from Tom Lane. Not everything works yet, and there's
no documentation or regression test, but let's commit this so Joe
doesn't need to cope with tracking changes in so many files ...
to reset session userid to the originally-authenticated name. Also,
relax SET SESSION AUTHORIZATION to allow specifying one's own username
even if one is not superuser, so as to avoid unnecessary error messages
when loading a pg_dump file that uses this command. Per discussion from
several months ago.
As proof of concept, provide an alternate implementation based on POSIX
semaphores. Also push the SysV shared-memory implementation into a
separate file so that it can be replaced conveniently.
in gram.y can make use of the keywords.c string table, instead of having
their own copies of the keyword strings. This saves a few kilobytes and
more importantly eliminates an opportunity for cut-and-paste errors.
pg_database, pg_shadow, pg_group, all of which now have potentially-long
fields. Along the way, get rid of SharedSystemRelationNames list: shared
rels are now identified in their include/pg_catalog/*.h files by a
BKI_SHARED_RELATION macro, while indexes and toast rels inherit sharedness
automatically from their parent table. Fix some bugs with failure to detoast
pg_group.grolist during ALTER GROUP.
messages more uniform and internationalizable: the global array
aclcheck_error_strings[] is gone in favor of a subroutine
aclcheck_error(). Partial implementation of namespace-related
permission checks --- not all done yet.
per pghackers discussion. Add some more typsanity tests, and clean
up some problems exposed thereby (broken or missing array types for
some built-in types). Also, clean up loose ends from unknownin/out
patch.
looking for places that assume UNKNOWN == TEXT. One of those was the
"SET" type in pg_type.h, which was using textin/textout. This one I took
care of in this patch. The other suspicious place was in
string_to_dataum (which is defined in both selfuncs.c and indxpath.c). I
wasn't too sure about those, so I left them be.
Joe Conway
Use "--enable-integer-datetimes" in configuration to use this rather
than the original float8 storage. I would recommend the integer-based
storage for any platform on which it is available. We perhaps should
make this the default for the production release.
Change timezone(timestamptz) results to return timestamp rather than
a character string. Formerly, we didn't have a way to represent
timestamps with an explicit time zone other than freezing the info into
a string. Now, we can reasonably omit the explicit time zone from the
result and return a timestamp with values appropriate for the specified
time zone. Much cleaner, and if you need the time zone in the result
you can put it into a character string pretty easily anyway.
Allow fractional seconds in date/time types even for dates prior to 1BC.
Limit timestamp data types to 6 decimal places of precision. Just right
for a micro-second storage of int8 date/time types, and reduces the
number of places ad-hoc rounding was occuring for the float8-based types.
Use lookup tables for precision/rounding calculations for timestamp and
interval types. Formerly used pow() to calculate the desired value but
with a more limited range there is no reason to not type in a lookup
table. Should be *much* better performance, though formerly there were
some optimizations to help minimize the number of times pow() was called.
Define a HAVE_INT64_TIMESTAMP variable. Based on the configure option
"--enable-integer-datetimes" and the existing internal INT64_IS_BUSTED.
Add explicit date/interval operators and functions for addition and
subtraction. Formerly relied on implicit type promotion from date to
timestamp with time zone.
Change timezone conversion functions for the timetz type from "timetz()"
to "timezone()". This is consistant with other time zone coersion
functions for other types.
Bump the catalog version to 200204201.
Fix up regression tests to reflect changes in fractional seconds
representation for date/times in BC eras.
All regression tests pass on my Linux box.
different privilege bits (might as well make use of the space we were
wasting on padding). EXECUTE and USAGE bits for procedures, languages
now are separate privileges instead of being overlaid on SELECT. Add
privileges for namespaces and databases. The GRANT and REVOKE commands
work for these object types, but we don't actually enforce the privileges
yet...
(tgrelid, tgname). This provides an additional check on trigger name
uniqueness per-table (which was already enforced by the code anyway).
With this change, RelationBuildTriggers will read the triggers in
order by tgname, since it's scanning using this index. Since a
predictable trigger ordering has been requested for some time, document
this behavior as a feature. Also document that rules fire in name
order, since yesterday's changes to pg_rewrite indexing cause that too.
DROP RULE and COMMENT ON RULE syntax adds an 'ON tablename' clause,
similar to TRIGGER syntaxes. To allow loading of existing pg_dump
files containing COMMENT ON RULE, the COMMENT code will still accept
the old syntax --- but only if the target rulename is unique across
the whole database.
an 'opclass owner' column in pg_opclass. Nothing is done with it at
present, but since there are plans to invent a CREATE OPERATOR CLASS
command soon, we'll probably want DROP OPERATOR CLASS too, which
suggests that a notion of ownership would be a good idea.
qualified operator names directly, for example CREATE OPERATOR myschema.+
( ... ). To qualify an operator name in an expression you need to write
OPERATOR(myschema.+) (thanks to Peter for suggesting an escape hatch).
I also took advantage of having to reformat pg_operator to fix something
that'd been bugging me for a while: mergejoinable operators should have
explicit links to the associated cross-data-type comparison operators,
rather than hardwiring an assumption that they are named < and >.
entries, per pghackers discussion. This fixes aggregates to live in
namespaces, and also simplifies/speeds up lookup in parse_func.c.
Also, add a 'proimplicit' flag to pg_proc that controls whether a type
coercion function may be invoked implicitly, or only explicitly. The
current settings of these flags are more permissive than I would like,
but we will need to debate and refine the behavior; for now, I avoided
breaking regression tests as much as I could.
volatile), rather than the old cachable/noncachable distinction. This
allows indexscan optimizations in many places where we formerly didn't.
Also, add a pronamespace column to pg_proc (it doesn't do anything yet,
however).
A new pg_hba.conf column, USER
Allow specifiction of lists of users separated by commas
Allow group names specified by +
Allow include files containing lists of users specified by @
Allow lists of databases, and database files
Allow samegroup in database column to match group name matching dbname
Removal of secondary password files
Remove pg_passwd utility
Lots of code cleanup in user.c and hba.c
New data/global/pg_pwd format
New data/global/pg_group file
depend on this rather than the trigger argument strings to locate the
other relation to test. This makes RI triggers function properly in
the presence of schemas and temp tables. Along the way, fix bogus lack
of locking in RI triggers, handle quoting of names fully correctly,
compute required sizes of query buffers with some semblance of accuracy.
path. The default behavior if no per-user schemas are created is that
all users share a 'public' namespace, thus providing behavior backwards
compatible with 7.2 and earlier releases. Probably the semantics and
default setting will need to be fine-tuned, but this is a start.
catalog namespace. This will not do as a production solution because
the interpretation of RI trigger arguments will vary depending on the
current namespace search path. I'm just putting it in so that the RI
regression tests don't fail while schema development proceeds. We
must find a better answer before 7.3 can be released.
sequence functions how to cope with qualified names. Same code is
also used for int4notin, currtid_byrelname, pgstattuple. Also,
move TOAST tables into special pg_toast namespace.
in schemas other than the system namespace; however, there's no search
path yet, and not all operations work yet on tables outside the system
namespace.
addRangeTableEntry calls. Remove relname field from RTEs, since
it will no longer be a useful unique identifier of relations;
we want to encourage people to rely on the relation OID instead.
Further work on dumping qual expressions in EXPLAIN, too.
objects to be privilege-checked. Some change in their APIs would be
necessary no matter what in the schema environment, and simply getting
rid of the name-based interface entirely seems like the best way.
the parsetree representation. As yet we don't *do* anything with schema
names, just drop 'em on the floor; but you can enter schema-compatible
command syntax, and there's even a primitive CREATE SCHEMA command.
No doc updates yet, except to note that you can now extract a field
from a function-returning-row's result with (foo(...)).fieldname.
* We should not even consider checking the row if it is no longer
* valid since it was either deleted (doesn't matter) or updated
* (in which case it'll be checked with its final values).
Stephan Szabo
