This adds a second standard channel binding type for SCRAM. It is
mainly intended for third-party clients that cannot implement
tls-unique, for example JDBC.
Author: Michael Paquier <michael.paquier@gmail.com>
This is the basic feature set using OpenSSL to support the feature. In
order to allow the frontend and the backend to fetch the sent and
expected TLS Finished messages, a PG-like API is added to be able to
make the interface pluggable for other SSL implementations.
This commit also adds a infrastructure to facilitate the addition of
future channel binding types as well as libpq parameters to control the
SASL mechanism names and channel binding names. Those will be added by
upcoming commits.
Some tests are added to the SSL test suite to test SCRAM authentication
with channel binding.
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
We don't actually support session tickets, since we do not create an SSL
session identifier. But it seems that OpenSSL will issue a session ticket
on-demand anyway, which will then fail when used. This results in
reconnection failures when using ticket-aware client-side SSL libraries
(such as the Npgsql .NET driver), as reported by Shay Rojansky.
To fix, just tell OpenSSL not to issue tickets. At some point in the
far future, we might consider enabling tickets instead. But the security
implications of that aren't entirely clear; and besides it would have
little benefit except for very short-lived database connections, which is
Something We're Bad At anyhow. It would take a lot of other work to get
to a point where that would really be an exciting thing to do.
While at it, also tell OpenSSL not to use a session cache. This doesn't
really do anything, since a backend would never populate the cache anyway,
but it might gain some micro-efficiencies and/or reduce security
exposures.
Patch by me, per discussion with Heikki Linnakangas and Shay Rojansky.
Back-patch to all supported versions.
Discussion: https://postgr.es/m/CADT4RqBU8N-csyZuzaook-c795dt22Zcwg1aHWB6tfVdAkodZA@mail.gmail.com
Commit c0a15e07c moved the setting of OpenSSL's SSL_OP_SINGLE_DH_USE option
into a new subroutine initialize_dh(), but forgot to remove it from where
it was. SSL_CTX_set_options() is a trivial function, amounting indeed to
just "ctx->options |= op", hence there's no reason to contort the code or
break separation of concerns to avoid calling it twice. So separating the
DH setup from disabling of old protocol versions is a good change, but we
need to finish the job.
Noted while poking into the question of SSL session tickets.
1024 bits is considered weak these days, but OpenSSL always passes 1024 as
the key length to the tmp_dh callback. All the code to handle other key
lengths is, in fact, dead.
To remedy those issues:
* Only include hard-coded 2048-bit parameters.
* Set the parameters directly with SSL_CTX_set_tmp_dh(), without the
callback
* The name of the file containing the DH parameters is now a GUC. This
replaces the old hardcoded "dh1024.pem" filename. (The files for other
key lengths, dh512.pem, dh2048.pem, etc. were never actually used.)
This is not a new problem, but it doesn't seem worth the risk and churn to
backport. If you care enough about the strength of the DH parameters on
old versions, you can create custom DH parameters, with as many bits as you
wish, and put them in the "dh1024.pem" file.
Per report by Nicolas Guini and Damian Quiroga. Reviewed by Michael Paquier.
Discussion: https://www.postgresql.org/message-id/CAMxBoUyjOOautVozN6ofzym828aNrDjuCcOTcCquxjwS-L2hGQ@mail.gmail.com
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Leave OpenSSL's default passphrase collection callback in place during
the first call of secure_initialize() in server startup. Although that
doesn't work terribly well in daemon contexts, some people feel we should
not break it for anyone who was successfully using it before. We still
block passphrase demands during SIGHUP, meaning that you can't adjust SSL
configuration on-the-fly if you used a passphrase, but this is no worse
than what it was before commit de41869b6. And we block passphrase demands
during EXEC_BACKEND reloads; that behavior wasn't useful either, but at
least now it's documented.
Tweak some related log messages for more readability, and avoid issuing
essentially duplicate messages about reload failure caused by a passphrase.
Discussion: https://postgr.es/m/29982.1483412575@sss.pgh.pa.us
OpenSSL's default behavior when loading a passphrase-protected key file
is to open /dev/tty and demand the password from there. It was kinda
sorta okay to allow that to happen at server start, but really that was
never workable in standard daemon environments. And it was a complete
fail on Windows, where the same thing would happen at every backend launch.
Yesterday's commit de41869b6 put the final nail in the coffin by causing
that to happen at every SIGHUP; even if you've still got a terminal acting
as the server's TTY, having the postmaster freeze until you enter the
passphrase again isn't acceptable.
Hence, override the default behavior with a callback that returns an empty
string, ensuring failure. Change the documentation to say that you can't
have a passphrase-protected server key, period.
If we can think of a production-grade way of collecting a passphrase from
somewhere, we might do that once at server startup and use this callback
to feed it to OpenSSL, but it's far from clear that anyone cares enough
to invest that much work in the feature. The lack of complaints about
the existing fractionally-baked behavior suggests nobody's using it anyway.
Discussion: https://postgr.es/m/29982.1483412575@sss.pgh.pa.us
It is no longer necessary to restart the server to enable, disable,
or reconfigure SSL. Instead, we just create a new SSL_CTX struct
(by re-reading all relevant files) whenever we get SIGHUP. Testing
shows that this is fast enough that it shouldn't be a problem.
In conjunction with that, downgrade the logic that complains about
pg_hba.conf "hostssl" lines when SSL isn't active: now that's just
a warning condition not an error.
An issue that still needs to be addressed is what shall we do with
passphrase-protected server keys? As this stands, the server would
demand the passphrase again on every SIGHUP, which is certainly
impractical. But the case was only barely supported before, so that
does not seem a sufficient reason to hold up committing this patch.
Andreas Karlsson, reviewed by Michael Banck and Michael Paquier
Discussion: https://postgr.es/m/556A6E8A.9030400@proxel.se
WaitLatch, WaitLatchOrSocket, and WaitEventSetWait now taken an
additional wait_event_info parameter; legal values are defined in
pgstat.h. This makes it possible to uniquely identify every point in
the core code where we are waiting for a latch; extensions can pass
WAIT_EXTENSION.
Because latches were the major wait primitive not previously covered
by this patch, it is now possible to see information in
pg_stat_activity on a large number of important wait events not
previously addressed, such as ClientRead, ClientWrite, and SyncRep.
Unfortunately, many of the wait events added by this patch will fail
to appear in pg_stat_activity because they're only used in background
processes which don't currently appear in pg_stat_activity. We should
fix this either by creating a separate view for such information, or
else by deciding to include them in pg_stat_activity after all.
Michael Paquier and Robert Haas, reviewed by Alexander Korotkov and
Thomas Munro.
LibreSSL defines OPENSSL_VERSION_NUMBER to claim that it is version 2.0.0,
but it doesn't have the functions added in OpenSSL 1.1.0. Add autoconf
checks for the individual functions we need, and stop relying on
OPENSSL_VERSION_NUMBER.
Backport to 9.5 and 9.6, like the patch that broke this. In the
back-branches, there are still a few OPENSSL_VERSION_NUMBER checks left,
to check for OpenSSL 0.9.8 or 0.9.7. I left them as they were - LibreSSL
has all those functions, so they work as intended.
Per buildfarm member curculio.
Discussion: <2442.1473957669@sss.pgh.pa.us>
Changes needed to build at all:
- Check for SSL_new in configure, now that SSL_library_init is a macro.
- Do not access struct members directly. This includes some new code in
pgcrypto, to use the resource owner mechanism to ensure that we don't
leak OpenSSL handles, now that we can't embed them in other structs
anymore.
- RAND_SSLeay() -> RAND_OpenSSL()
Changes that were needed to silence deprecation warnings, but were not
strictly necessary:
- RAND_pseudo_bytes() -> RAND_bytes().
- SSL_library_init() and OpenSSL_config() -> OPENSSL_init_ssl()
- ASN1_STRING_data() -> ASN1_STRING_get0_data()
- DH_generate_parameters() -> DH_generate_parameters()
- Locking callbacks are not needed with OpenSSL 1.1.0 anymore. (Good
riddance!)
Also change references to SSLEAY_VERSION_NUMBER with OPENSSL_VERSION_NUMBER,
for the sake of consistency. OPENSSL_VERSION_NUMBER has existed since time
immemorial.
Fix SSL test suite to work with OpenSSL 1.1.0. CA certificates must have
the "CA:true" basic constraint extension now, or OpenSSL will refuse them.
Regenerate the test certificates with that. The "openssl" binary, used to
generate the certificates, is also now more picky, and throws an error
if an X509 extension is specified in "req_extensions", but that section
is empty.
Backpatch to all supported branches, per popular demand. In back-branches,
we still support OpenSSL 0.9.7 and above. OpenSSL 0.9.6 should still work
too, but I didn't test it. In master, we only support 0.9.8 and above.
Patch by Andreas Karlsson, with additional changes by me.
Discussion: <20160627151604.GD1051@msg.df7cb.de>
Since we removed SSL renegotiation, there's no longer any reason to
keep track of the amount of data transferred over the link.
Daniel Gustafsson
Discussion: <FEA7F89C-ECDF-4799-B789-2F8DDCBA467F@yesql.se>
OpenSSL officially only supports 1.0.1 and newer. Some OS distributions
still provide patches for 0.9.8, but anything older than that is not
interesting anymore. Let's simplify things by removing compatibility code.
Andreas Karlsson, with small changes by me.
OpenSSL has an unfortunate tendency to mix per-session state error
handling with per-thread error handling. This can cause problems when
programs that link to libpq with OpenSSL enabled have some other use of
OpenSSL; without care, one caller of OpenSSL may cause problems for the
other caller. Backend code might similarly be affected, for example
when a third party extension independently uses OpenSSL without taking
the appropriate precautions.
To fix, don't trust other users of OpenSSL to clear the per-thread error
queue. Instead, clear the entire per-thread queue ahead of certain I/O
operations when it appears that there might be trouble (these I/O
operations mostly need to call SSL_get_error() to check for success,
which relies on the queue being empty). This is slightly aggressive,
but it's pretty clear that the other callers have a very dubious claim
to ownership of the per-thread queue. Do this is both frontend and
backend code.
Finally, be more careful about clearing our own error queue, so as to
not cause these problems ourself. It's possibly that control previously
did not always reach SSLerrmessage(), where ERR_get_error() was supposed
to be called to clear the queue's earliest code. Make sure
ERR_get_error() is always called, so as to spare other users of OpenSSL
the possibility of similar problems caused by libpq (as opposed to
problems caused by a third party OpenSSL library like PHP's OpenSSL
extension). Again, do this is both frontend and backend code.
See bug #12799 and https://bugs.php.net/bug.php?id=68276
Based on patches by Dave Vitek and Peter Eisentraut.
From: Peter Geoghegan <pg@bowt.ie>
We used to require the server key file to have permissions 0600 or less
for best security. But some systems (such as Debian) have certificate
and key files managed by the operating system that can be shared with
other services. In those cases, the "postgres" user is made a member of
a special group that has access to those files, and the server key file
has permissions 0640. To accommodate that kind of setup, also allow the
key file to have permissions 0640 but only if owned by root.
From: Christoph Berg <myon@debian.org>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
While postgres' use of SSL renegotiation is a good idea in theory, it
turned out to not work well in practice. The specification and openssl's
implementation of it have lead to several security issues. Postgres' use
of renegotiation also had its share of bugs.
Additionally OpenSSL has a bunch of bugs around renegotiation, reported
and open for years, that regularly lead to connections breaking with
obscure error messages. We tried increasingly complex workarounds to get
around these bugs, but we didn't find anything complete.
Since these connection breakages often lead to hard to debug problems,
e.g. spuriously failing base backups and significant latency spikes when
synchronous replication is used, we have decided to change the default
setting for ssl renegotiation to 0 (disabled) in the released
backbranches and remove it entirely in 9.5 and master.
Author: Andres Freund
Discussion: 20150624144148.GQ4797@alap3.anarazel.de
Backpatch: 9.5 and master, 9.0-9.4 get a different patch
Reentering this function with the right timing caused a double free,
typically crashing the backend. By synchronizing a disconnection with
the authentication timeout, an unauthenticated attacker could achieve
this somewhat consistently. Call be_tls_close() solely from within
proc_exit_prepare(). Back-patch to 9.0 (all supported versions).
Benkocs Norbert Attila
Security: CVE-2015-3165
This view shows information about all connections, such as if the
connection is using SSL, which cipher is used, and which client
certificate (if any) is used.
Reviews by Alex Shulgin, Heikki Linnakangas, Andres Freund & Michael Paquier
This reverts the removal of the call in commit (272923a0). It turns out it
wasn't superfluous after all: without it, renegotiation fails if a client
certificate was used. The rest of the changes in that commit are still OK
and not reverted.
Per investigation of bug #12769 by Arne Scheffer, although this doesn't fix
the reported bug yet.
The client socket is always in non-blocking mode, and if we actually want
blocking behaviour, we emulate it by sleeping and retrying. But we have
retry loops at different layers for reads and writes, which was confusing.
To simplify, remove all the sleeping and retrying code from the lower
levels, from be_tls_read and secure_raw_read and secure_raw_write, and put
all the logic in secure_read() and secure_write().
At least in all modern versions of OpenSSL, it is enough to call
SSL_renegotiate() once, and then forget about it. Subsequent SSL_write()
and SSL_read() calls will finish the handshake.
The SSL_set_session_id_context() call is unnecessary too. We only have
one SSL context, and the SSL session was created with that to begin with.
We used to handle authentication_timeout by setting
ImmediateInterruptOK to true during large parts of the authentication
phase of a new connection. While that happens to work acceptably in
practice, it's not particularly nice and has ugly corner cases.
Previous commits converted the FE/BE communication to use latches and
implemented support for interrupt handling during both
send/recv. Building on top of that work we can get rid of
ImmediateInterruptOK during authentication, by immediately treating
timeouts during authentication as a reason to die. As die interrupts
are handled immediately during client communication that provides a
sensibly quick reaction time to authentication timeout.
Additionally add a few CHECK_FOR_INTERRUPTS() to some more complex
authentication methods. More could be added, but this already should
provides a reasonable coverage.
While it this overall increases the maximum time till a timeout is
reacted to, it greatly reduces complexity and increases
reliability. That seems like a overall win. If the increase proves to
be noticeable we can deal with those cases by moving to nonblocking
network code and add interrupt checking there.
Reviewed-By: Heikki Linnakangas
Up to now it was impossible to terminate a backend that was trying to
send/recv data to/from the client when the socket's buffer was already
full/empty. While the send/recv calls itself might have gotten
interrupted by signals on some platforms, we just immediately retried.
That could lead to situations where a backend couldn't be terminated ,
after a client died without the connection being closed, because it
was blocked in send/recv.
The problem was far more likely to be hit when sending data than when
reading. That's because while reading a command from the client, and
during authentication, we processed interrupts immediately . That
primarily left COPY FROM STDIN as being problematic for recv.
Change things so that that we process 'die' events immediately when
the appropriate signal arrives. We can't sensibly react to query
cancels at that point, because we might loose sync with the client as
we could be in the middle of writing a message.
We don't interrupt writes if the write buffer isn't full, as indicated
by write() returning EWOULDBLOCK, as that would lead to fewer error
messages reaching clients.
Per discussion with Kyotaro HORIGUCHI and Heikki Linnakangas
Discussion: 20140927191243.GD5423@alap3.anarazel.de
Up to now large swathes of backend code ran inside signal handlers
while reading commands from the client, to allow for speedy reaction to
asynchronous events. Most prominently shared invalidation and NOTIFY
handling. That means that complex code like the starting/stopping of
transactions is run in signal handlers... The required code was
fragile and verbose, and is likely to contain bugs.
That approach also severely limited what could be done while
communicating with the client. As the read might be from within
openssl it wasn't safely possible to trigger an error, e.g. to cancel
a backend in idle-in-transaction state. We did that in some cases,
namely fatal errors, nonetheless.
Now that FE/BE communication in the backend employs non-blocking
sockets and latches to block, we can quite simply interrupt reads from
signal handlers by setting the latch. That allows us to signal an
interrupted read, which is supposed to be retried after returning from
within the ssl library.
As signal handlers now only need to set the latch to guarantee timely
interrupt processing, remove a fair amount of complicated & fragile
code from async.c and sinval.c.
We could now actually start to process some kinds of interrupts, like
sinval ones, more often that before, but that seems better done
separately.
This work will hopefully allow to handle cases like being blocked by
sending data, interrupting idle transactions and similar to be
implemented without too much effort. In addition to allowing getting
rid of ImmediateInterruptOK, that is.
Author: Andres Freund
Reviewed-By: Heikki Linnakangas
This allows to introduce more elaborate handling of interrupts while
reading from a socket. Currently some interrupt handlers have to do
significant work from inside signal handlers, and it's very hard to
correctly write code to do so. Generic signal handler limitations,
combined with the fact that we can't safely jump out of a signal
handler while reading from the client have prohibited implementation
of features like timeouts for idle-in-transaction.
Additionally we use the latch code to wait in a couple places where we
previously only had waiting code on windows as other platforms just
busy looped.
This can increase the number of systemcalls happening during FE/BE
communication. Benchmarks so far indicate that the impact isn't very
high, and there's room for optimization in the latch code. The chance
of cleaning up the usage of latches gives us, seem to outweigh the
risk of small performance regressions.
This commit theoretically can't used without the next patch in the
series, as WaitLatchOrSocket is not defined to be fully signal
safe. As we already do that in some cases though, it seems better to
keep the commits separate, so they're easier to understand.
Author: Andres Freund
Reviewed-By: Heikki Linnakangas
Move the functions within the file so that public interface functions come
first, followed by internal functions. Previously, be_tls_write was first,
then internal stuff, and finally the rest of the public interface, which
clearly didn't make much sense.
Per Andres Freund's complaint.
This refactoring is in preparation for adding support for other SSL
implementations, with no user-visible effects. There are now two #defines,
USE_OPENSSL which is defined when building with OpenSSL, and USE_SSL which
is defined when building with any SSL implementation. Currently, OpenSSL is
the only implementation so the two #defines go together, but USE_SSL is
supposed to be used for implementation-independent code.
The libpq SSL code is changed to use a custom BIO, which does all the raw
I/O, like we've been doing in the backend for a long time. That makes it
possible to use MSG_NOSIGNAL to block SIGPIPE when using SSL, which avoids
a couple of syscall for each send(). Probably doesn't make much performance
difference in practice - the SSL encryption is expensive enough to mask the
effect - but it was a natural result of this refactoring.
Based on a patch by Martijn van Oosterhout from 2006. Briefly reviewed by
Alvaro Herrera, Andreas Karlsson, Jeff Janes.
Peter Eisentraut
Bruce Momjian
Tom Lane
Heikki Linnakangas
Robert Haas
Andres Freund
Noah Misch
Magnus Hagander