but the code is basically working. Along the way, rewrite the entire
approach to processing OR index conditions, and make it work in join
cases for the first time ever. orindxpath.c is now basically obsolete,
but I left it in for the time being to allow easy comparison testing
against the old implementation.
scans, using in-memory tuple ID bitmaps as the intermediary. The planner
frontend (path creation and cost estimation) is not there yet, so none
of this code can be executed. I have tested it using some hacked planner
code that is far too ugly to see the light of day, however. Committing
now so that the bulk of the infrastructure changes go in before the tree
drifts under me.
return just a single tuple at a time. Currently the only such node
type is Hash, but I expect we will soon have indexscans that can return
tuple bitmaps. A side benefit is that EXPLAIN ANALYZE now shows the
correct tuple count for a Hash node.
executing a statement that fires triggers. Formerly this time was
included in "Total runtime" but not otherwise accounted for.
As a side benefit, we avoid re-opening relations when firing non-deferred
AFTER triggers, because the trigger code can re-use the main executor's
ResultRelInfo data structure.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
had to do in DECLARE CURSOR. AFAICS these are all the places affected.
PREPARE case per example from Michael Fuhr, EXPLAIN case located by
grepping for planner calls ...
mode see a fresh snapshot for each command in the function, rather than
using the latest interactive command's snapshot. Also, suppress fresh
snapshots as well as CommandCounterIncrement inside STABLE and IMMUTABLE
functions, instead using the snapshot taken for the most closely nested
regular query. (This behavior is only sane for read-only functions, so
the patch also enforces that such functions contain only SELECT commands.)
As per my proposal of 6-Sep-2004; I note that I floated essentially the
same proposal on 19-Jun-2002, but that discussion tailed off without any
action. Since 8.0 seems like the right place to be taking possibly
nontrivial backwards compatibility hits, let's get it done now.
rather than when returning to the idle loop. This makes no particular
difference for interactively-issued queries, but it makes a big difference
for queries issued within functions: trigger execution now occurs before
the calling function is allowed to proceed. This responds to numerous
complaints about nonintuitive behavior of foreign key checking, such as
http://archives.postgresql.org/pgsql-bugs/2004-09/msg00020.php, and
appears to be required by the SQL99 spec.
Also take the opportunity to simplify the data structures used for the
pending-trigger list, rename them for more clarity, and squeeze out a
bit of space.
until Bind is received, so that actual parameter values are visible to the
planner. Make use of the parameter values for estimation purposes (but
don't fold them into the actual plan). This buys back most of the
potential loss of plan quality that ensues from using out-of-line
parameters instead of putting literal values right into the query text.
This patch creates a notion of constant-folding expressions 'for
estimation purposes only', in which case we can be more aggressive than
the normal eval_const_expressions() logic can be. Right now the only
difference in behavior is inserting bound values for Params, but it will
be interesting to look at other possibilities. One that we've seen
come up repeatedly is reducing now() and related functions to current
values, so that queries like ... WHERE timestampcol > now() - '1 day'
have some chance of being planned effectively.
Oliver Jowett, with some kibitzing from Tom Lane.
In the past, we used a 'Lispy' linked list implementation: a "list" was
merely a pointer to the head node of the list. The problem with that
design is that it makes lappend() and length() linear time. This patch
fixes that problem (and others) by maintaining a count of the list
length and a pointer to the tail node along with each head node pointer.
A "list" is now a pointer to a structure containing some meta-data
about the list; the head and tail pointers in that structure refer
to ListCell structures that maintain the actual linked list of nodes.
The function names of the list API have also been changed to, I hope,
be more logically consistent. By default, the old function names are
still available; they will be disabled-by-default once the rest of
the tree has been updated to use the new API names.
results with tuples as ordinary varlena Datums. This commit does not
in itself do much for us, except eliminate the horrid memory leak
associated with evaluation of whole-row variables. However, it lays the
groundwork for allowing composite types as table columns, and perhaps
some other useful features as well. Per my proposal of a few days ago.
to allow es_snapshot to be set to SnapshotNow rather than a query snapshot.
This solves a bug reported by Wade Klaver, wherein triggers fired as a
result of RI cascade updates could misbehave.
yet, though). Avoid using nth() to fetch tlist entries; provide a
common routine get_tle_by_resno() to search a tlist for a particular
resno. This replaces a couple uses of nth() and a dozen hand-coded
search loops. Also, replace a few uses of nth(length-1, list) with
llast().
handle multiple 'formats' for data I/O. Restructure CommandDest and
DestReceiver stuff one more time (it's finally starting to look a bit
clean though). Code now matches latest 3.0 protocol document as far
as message formats go --- but there is no support for binary I/O yet.
DestReceiver pointers instead of just CommandDest values. The DestReceiver
is made at the point where the destination is selected, rather than
deep inside the executor. This cleans up the original kluge implementation
of tstoreReceiver.c, and makes it easy to support retrieving results
from utility statements inside portals. Thus, you can now do fun things
like Bind and Execute a FETCH or EXPLAIN command, and it'll all work
as expected (e.g., you can Describe the portal, or use Execute's count
parameter to suspend the output partway through). Implementation involves
stuffing the utility command's output into a Tuplestore, which would be
kind of annoying for huge output sets, but should be quite acceptable
for typical uses of utility commands.
the column by table OID and column number, if it's a simple column
reference. Along the way, get rid of reskey/reskeyop fields in Resdoms.
Turns out that representation was not convenient for either the planner
or the executor; we can make the planner deliver exactly what the
executor wants with no more effort.
initdb forced due to change in stored rule representation.
rewritten and the protocol is changed, but most elog calls are still
elog calls. Also, we need to contemplate mechanisms for controlling
all this functionality --- eg, how much stuff should appear in the
postmaster log? And what API should libpq expose for it?
utility statement (DeclareCursorStmt) with a SELECT query dangling from
it, rather than a SELECT query with a few unusual fields in it. Add
code to determine whether a planned query can safely be run backwards.
If DECLARE CURSOR specifies SCROLL, ensure that the plan can be run
backwards by adding a Materialize plan node if it can't. Without SCROLL,
you get an error if you try to fetch backwards from a cursor that can't
handle it. (There is still some discussion about what the exact
behavior should be, but this is necessary infrastructure in any case.)
Along the way, make EXPLAIN DECLARE CURSOR work.
rid of the assumption that sizeof(Oid)==sizeof(int). This is one small
step towards someday supporting 8-byte OIDs. For the moment, it doesn't
do much except get rid of a lot of unsightly casts.
a per-query memory context created by CreateExecutorState --- and destroyed
by FreeExecutorState. This provides a final solution to the longstanding
problem of memory leaked by various ExecEndNode calls.
in the planned representation of a subplan at all any more, only SubPlan.
This means subselect.c doesn't scribble on its input anymore, which seems
like a good thing; and there are no longer three different possible
interpretations of a SubLink. Simplify node naming and improve comments
in primnodes.h. No change to stored rules, though.
execution state trees, and ExecEvalExpr takes an expression state tree
not an expression plan tree. The plan tree is now read-only as far as
the executor is concerned. Next step is to begin actually exploiting
this property.
so that all executable expression nodes inherit from a common supertype
Expr. This is somewhat of an exercise in code purity rather than any
real functional advance, but getting rid of the extra Oper or Func node
formerly used in each operator or function call should provide at least
a little space and speed improvement.
initdb forced by changes in stored-rules representation.
to plan nodes, not vice-versa. All executor state nodes now inherit from
struct PlanState. Copying of plan trees has been simplified by not
storing a list of SubPlans in Plan nodes (eliminating duplicate links).
The executor still needs such a list, but it can build it during
ExecutorStart since it has to scan the plan tree anyway.
No initdb forced since no stored-on-disk structures changed, but you
will need a full recompile because of node-numbering changes.
node now does its own grouping of the input rows, and has no need for a
preceding GROUP node in the plan pipeline. This allows elimination of
the misnamed tuplePerGroup option for GROUP, and actually saves more code
in nodeGroup.c than it costs in nodeAgg.c, as well as being presumably
faster. Restructure the API of query_planner so that we do not commit to
using a sorted or unsorted plan in query_planner; instead grouping_planner
makes the decision. (Right now it isn't any smarter than query_planner
was, but that will change as soon as it has the option to select a hash-
based aggregation step.) Despite all the hackery, no initdb needed since
only in-memory node types changed.
ANALYZE is not quite clear when branches of the query are never
executed. So this tiny patch fixes that.
The patch is attached and can also be found at:
http://svana.org/kleptog/pgsql/pgsql-explain.patch
Martijn van Oosterhout
ruleutils display is not such a great idea. For arguments of functions
and operators I think we'd better keep the historical behavior of showing
such casts explicitly, to ensure that the function/operator is reparsed
the same way when the rule is reloaded. This also makes the output of
EXPLAIN less obscurantist about exactly what's happening.
(overlaying low byte of page size) and add HEAP_HASOID bit to t_infomask,
per earlier discussion. Simplify scheme for overlaying fields in tuple
header (no need for cmax to live in more than one place). Don't try to
clear infomask status bits in tqual.c --- not safe to do it there. Don't
try to force output table of a SELECT INTO to have OIDs, either. Get rid
of unnecessarily complex three-state scheme for TupleDesc.tdhasoids, which
has already caused one recent failure. Improve documentation.
Tom Lane
PostgreSQL Daemon
Bruce Momjian
Neil Conway