number of palloc calls. This has a salutory impact on plpgsql operations
with record variables (which create and destroy tupdescs constantly)
and probably helps a bit in some other cases too.
on-the-fly, and thereby avoid blowing out memory when the planner has
underestimated the hash table size. Hash join will now obey the
work_mem limit with some faithfulness. Per my recent proposal
(hash aggregate part isn't done yet though).
the freelist, plus per-buffer spinlocks that protect access to individual
shared buffer headers. This requires abandoning a global freelist (since
the freelist is a global contention point), which shoots down ARC and 2Q
as well as plain LRU management. Adopt a clock sweep algorithm instead.
Preliminary results show substantial improvement in multi-backend situations.
in favor of looking at the flat file copy of pg_database during backend
startup. This should finally eliminate the various corner cases in which
backend startup fails unexpectedly because it isn't able to distinguish
live and dead tuples in pg_database. Simplify locking on pg_database
to be similar to the rules used with pg_shadow and pg_group, and eliminate
FlushRelationBuffers operations that were used only to reduce the odds
of failure of GetRawDatabaseInfo.
initdb forced due to addition of a trigger to pg_database.
implement the md5() SQL-level function). The old code did the
following:
1. de-toast the datum
2. convert it to a cstring via textout()
3. get the length of the cstring via strlen()
Since we are treating the datum context as a blob of binary data,
the latter two steps are unnecessary. Once the data has been
detoasted, we can just use it as-is, and derive its length from
the varlena metadata.
This patch improves some run-of-the-mill md5() computations by
just under 10% in my limited tests, and passes the regression tests.
I also noticed that md5_text() wasn't checking the return value
of md5_hash(); encountering OOM at precisely the right moment
could result in returning a random md5 hash. This patch corrects
that. A better fix would be to make md5_hash() only return on
success (and/or allocate via palloc()), but since it's used in
the frontend as well I don't see an easy way to do that.
during flat-file writing. The only difference is that SnapshotSelf
would consider tuples of the 'current command' within the current
transaction as valid, where SnapshotNow wouldn't. We can eliminate
the need for this with one extra CommandCounterIncrement call before
we start reading the catalogs.
the AMI_OVERRIDE flag. The fact that TransactionLogFetch treats
BootstrapTransactionId as always committed is sufficient to make
bootstrap work, and getting rid of extra tests in heavily used code
paths seems like a win. The files produced by initdb are demonstrably
the same after this change.
file now identifies group members by usesysid not name; this avoids
needing to depend on SearchSysCache which we can't use during startup.
(The old representation was entirely broken anyway, since we did not
regenerate the file following RENAME USER.) It's only a 95% solution
because if the group membership list is big enough to be toasted out
of line, we cannot read it during startup. I think this will do for
the moment, until we have time to implement the planned pg_role
replacement for pg_group.
in GetNewTransactionId(). Since the limit value has to be computed
before we run any real transactions, this requires adding code to database
startup to scan pg_database and determine the oldest datfrozenxid.
This can conveniently be combined with the first stage of an attack on
the problem that the 'flat file' copies of pg_shadow and pg_group are
not properly updated during WAL recovery. The code I've added to
startup resides in a new file src/backend/utils/init/flatfiles.c, and
it is responsible for rewriting the flat files as well as initializing
the XID wraparound limit value. This will eventually allow us to get
rid of GetRawDatabaseInfo too, but we'll need an initdb so we can add
a trigger to pg_database.
estimate to less than the number of values estimated for any one grouping
Var, as suggested by Manfred. This is intuitively right, and what's
more it puts the plan choices in the subselect regression test back the
way they were before ...
clamp the estimated number of groups to table row count over 10, instead
of table row count; this reflects a heuristic that people probably won't
group over a near-unique set of columns, and the knowledge that we don't
currently have any way to estimate the correlation of the columns better
than guessing. This change creates a trivial plan change in one of the
regression tests.
to avoid problems when a cursor depends on objects created or changed in
the same subtransaction. We'd like to do better someday, but this seems
the only workable answer for 8.0.1.
got it wrong when the JOIN was in an outer query level. Per example from
Laurie Burrow. Also fix same issue in markTargetListOrigin. I think the
latter is only a latent bug since we currently don't apply markTargetListOrigin
except at the outer level ... but should do it right anyway.
so that we can get the size of a shared inval message back down to what it
was in 7.4 (and simplify the logic too). Phase 2 of fixing the
'SMgrRelation hashtable corrupted' problem.
is the minimum required fix. I want to look next at taking advantage of
it by simplifying the message semantics in the shared inval message queue,
but that part can be held over for 8.1 if it turns out too ugly.
releases, a nonzero 'c' argument meant that the input string could be
terminated by either that character or \0. Recent refactoring broke
that, causing the thing to scan for 'c' only. This went undetected
because no part of the main code actually passes nonzero 'c'. However
it broke tsearch2 and possibly other user-written code that assumed
the old definition. Per report from Tom Hebbron.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
(rd_att) field of a nailed-in-cache relcache entry. This fixes the bug
reported by Alvaro 8-Dec-2004; I believe it probably also explains
Grant Finnemore's report of 10-Sep-2004.
In an unrelated change in the same file, put back 7.4's response to
failure to rename() the relcache init file, ie, unlink the useless
temp file. I did not put back the warning message, since there might
actually be some reason not to have that.
of an inheritance child table is binary-compatible with the rowtype of
its parent, invent an expression node type that does the conversion
correctly. Fixes the new bug exhibited by Kris Shannon as well as a
lot of old bugs that would only show up when using multiple inheritance
or after altering the parent table.
the "ps" argument list on Unix - meaning that there is no way to
identify for example the stats processors or the bgwriter.
This patch adds this functionality, in a bit of a crufty way. It creates
a kernel Event object with the name of what would be in the title. This
can be viewed using for example Process Explorer.
It's been very handy for me during both debugging and using. I haven't
figured a better way, but perhaps someone has one that's less crufty? If
not, here is at least a working patch :-)
Magnus Hagander
escapes --- they aren't simply quoted characters. Problem noted by
Antti Salmela. Also fix problem with incorrect handling of multibyte
characters when followed by a quantifier.
error conditions during regexp compile, but not during regexp execution;
any sort of "can't happen" errors would be treated as no-match instead
of being reported as they should be. Noticed while trying to duplicate
a reported Tcl bug.
to be processed by GUC before InitPostgres, because any required lookup
of the encoding conversion function has to be done during InitializeClientEncoding.
So, I broke this last week by moving GUC processing to after InitPostgres :-(.
What we can do as a compromise is process non-SUSET variables during
command line scanning (the same as before), and postpone the processing
of only SUSET variables. None of the SUSET variables need to be set
before InitPostgres.
fill factor has been exceeded. We usually run with ffactor == 1, but
the way the test was coded, it wouldn't split a bucket until the actual
fill factor reached 2.0, because of use of integer division. Change
from > to >= so that it will split more aggressively when the table
starts to get full.
few cycles during transaction exit. A typical session probably
wouldn't have as many as half a dozen portals open at once, so the
original value of 64 seems far larger than needed.
plain SUSET instead. Also delay processing of options received in
client connection request until after we know if the user is a superuser,
so that SUSET values can be set that way by legitimate superusers.
Per recent discussion.
estimates when combining the estimates for a range query. As pointed out
by Miquel van Smoorenburg, the existing check for an impossible combined
result would quite possibly fail to detect one default and one non-default
input. It seems better to use the default range query estimate in such
cases. To do so, add a check for an estimate of exactly DEFAULT_INEQ_SEL.
This is a bit ugly because it introduces additional coupling between
clauselist_selectivity and scalarltsel/scalargtsel, but it's not like
there wasn't plenty already...
clause implicitly whenever one is not given explicitly. Remove concept
of a schema having an associated tablespace, and simplify the rules for
selecting a default tablespace for a table or index. It's now just
(a) explicit TABLESPACE clause; (b) default_tablespace if that's not an
empty string; (c) database's default. This will allow pg_dump to use
SET commands instead of tablespace clauses to determine object locations
(but I didn't actually make it do so). All per recent discussions.
to DAY precision or coarser; leave the timezone alone when precision is
HOUR or less. This avoids surprises for inputs near a DST transition
time, as per example from Matthew Gabeler-Lee. (The only reason we
recalculate at all is so that outputs that are supposed to represent
days will come out as local midnight, and that's not relevant for sub-day
precision.)
use it, as per my proposal of yesterday. This gives us a means of
determining the zone offset to impute to an unlabeled timestamp that
is both efficient and reliable, unlike all our previous tries involving
mktime() and localtime(). The behavior for invalid or ambiguous times
at a DST transition is fixed to be really and truly "assume standard
time", fixing a bug that has come and gone repeatedly but was back
again in 7.4. (There is some ongoing discussion about whether we should
raise an error instead, but for the moment I'll make it do what it was
previously intended to do.)
of HeapTupleSatisfiesItself() to trigger a hint-bit update on the tuple:
if the row was updated or deleted by a subtransaction of my own transaction
that was later rolled back. This cannot occur in pre-8.0 of course, so
the hint-bit patch applied a couple weeks ago is OK for existing releases.
But for 8.0 it seems we had better fix things so that RI_FKey_check can
pass the correct buffer number to HeapTupleSatisfiesItself. Accordingly,
add fields to the TriggerData struct to carry the buffer ID(s) for the
old and new tuple(s). There are other possible solutions but this one
seems cleanest; it will allow other AFTER-trigger functions to safely
do tqual.c calls if they want to. Put new fields at end of struct so
that there is no API breakage.
try to display it as a reference to the underlying column instead. This
is a legitimate substitution (it wouldn't be for a named join) and it
fixes some cases where the display would otherwise be ambiguous. Per
example from Sim Zacks.
returning a NULL pointer (some callers remembered to check the return
value, but some did not -- it is safer to just bail out).
Also, cleanup pgstat.c to use elog(ERROR) rather than elog(LOG) followed
by exit().
examinable by non-superusers, and use it to protect the recently-added
GUC variables for data directory and config files. For now I have only
flagged those variables that could be used to deduce something about
the server's filesystem layout, but possibly we should also mark vars
related to logging settings and other admin-only information?
to make life cushy for the JDBC driver. Centralize the decision-making
that affects this by inventing a get_type_func_class() function, rather
than adding special cases in half a dozen places.
This does not disable the bgwriter process: it still has to wake up often
enough to collect fsync requests from backends in a timely fashion. But
it responds to the recent gripe about not being able to prevent the disk
from being spun up constantly.
only covered the case of assigning "", and failed to recognize that
actually setlocale(LC_MESSAGES,...) does not work at all on this platform.
Magnus Hagander, some code prettification by Tom Lane.
pins at end of transaction, and reduce AtEOXact_Buffers to an Assert
cross-check that this was done correctly. When not USE_ASSERT_CHECKING,
AtEOXact_Buffers is a complete no-op. This gets rid of an O(NBuffers)
bottleneck during transaction commit/abort, which recent testing has shown
becomes significant above a few tens of thousands of shared buffers.
http://archives.postgresql.org/pgsql-hackers/2004-10/msg00464.php.
This fix is intended to be permanent: it moves the responsibility for
calling SetBufferCommitInfoNeedsSave() into the tqual.c routines,
eliminating the requirement for callers to test whether t_infomask changed.
Also, tighten validity checking on buffer IDs in bufmgr.c --- several
routines were paranoid about out-of-range shared buffer numbers but not
about out-of-range local ones, which seems a tad pointless.
- remove another senseless "extern" keyword that was applied to a
function definition
- change a foo more function signatures from "some_type foo()" to
"some_type foo(void)"
- rewrite another K&R style function definition
- make the type of the "action" function pointer in the KeyWord struct
in src/backend/utils/adt/formatting.c more precise
- replace some function signatures of the form "some_type foo()" with
"some_type foo(void)"
- replace a few instances of a literal 0 being used as a NULL pointer;
there are more instances of this in the code, but I just fixed a few
- in src/backend/utils/mb/wstrncmp.c, replace K&R style function
declarations with ANSI style, remove use of 'register' keyword
- remove an "extern" modifier that was applied to a function definition
(rather than a declaration)
The vars are renamed to data_directory, config_file, hba_file, and
ident_file, and are guaranteed to be set to accurate absolute paths
during postmaster startup.
This commit does not yet do anything about hiding path values from
non-superusers.
Refactor code into something reasonably understandable, cause
use of the feature to not fail in standalone backends or in
EXEC_BACKEND case, fix sloppy guc.c table entries, make the
documentation minimally usable.
list elements comma-separated instead of barfing. This allows elimination
of half a dozen redundant copies of that behavior, and also makes the
world safe again for pg_get_expr() applied to pg_index.indexprs, per gripe
from Alexander Zhiltsov.
bigint variants). Clean up some inconsistencies in error message wording.
Fix scanint8 to allow trailing whitespace in INT64_MIN case. Update
int8-exp-three-digits.out, which seems to have been ignored by the last
couple of people to modify the int8 regression test, and remove
int8-exp-three-digits-win32.out which is thereby exposed as redundant.
This seems the cleanest way of fixing its lack of a shutdown callback,
which was preventing it from working correctly in a query that didn't
run it to completion. Per bug report from Szima GÄbor.
must be stale. Tweak example startup scripts to not use pg_ctl but launch
the postmaster directly, thereby ensuring that only the postmaster's direct
parent shell will be a postgres-owned process. In combination these should
fix the longstanding problem of the postmaster sometimes refusing to start
during reboot because it thinks the old lockfile is not stale.