up have the standard layout with unused space between pd_lower and pd_upper.
When this is set, XLogInsert will omit the unused space without bothering
to scan it to see if it's zero. That saves time in XLogInsert, and also
allows reversion of my earlier patch to make PageRepairFragmentation et al
explicitly re-zero freed space. Per suggestion by Heikki Linnakangas.
spotted by Qingqing Zhou. The HASH_ENTER action now automatically
fails with elog(ERROR) on out-of-memory --- which incidentally lets
us eliminate duplicate error checks in quite a bunch of places. If
you really need the old return-NULL-on-out-of-memory behavior, you
can ask for HASH_ENTER_NULL. But there is now an Assert in that path
checking that you aren't hoping to get that behavior in a palloc-based
hash table.
Along the way, remove the old HASH_FIND_SAVE/HASH_REMOVE_SAVED actions,
which were not being used anywhere anymore, and were surely too ugly
and unsafe to want to see revived again.
to write out data that we are about to tell the filesystem to drop.
smgr_internal_unlink already had a DropRelFileNodeBuffers call to
get rid of dead buffers without a write after it's no longer possible
to roll back the deleting transaction. Adding a similar call in
smgrtruncate simplifies callers and makes the overall division of
labor clearer. This patch removes the former behavior that VACUUM
would write all dirty buffers of a relation unconditionally.
is the minimum required fix. I want to look next at taking advantage of
it by simplifying the message semantics in the shared inval message queue,
but that part can be held over for 8.1 if it turns out too ugly.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
of XLogInsert had the same sort of checkpoint interlock problem as
RecordTransactionCommit, and indeed I found some. Btree index build
and ALTER TABLE SET TABLESPACE write data outside the friendly confines
of the buffer manager, and therefore they have to take their own
responsibility for checkpoint interlock. The easiest solution seems to
be to force smgrimmedsync at the end of the index build or table copy,
even when the operation is being WAL-logged. This is sufficient since
the new index or table will be of interest to no one if we don't get
as far as committing the current transaction.
keep track of portal-related resources separately from transaction-related
resources. This allows cursors to work in a somewhat sane fashion with
nested transactions. For now, cursor behavior is non-subtransactional,
that is a cursor's state does not roll back if you abort a subtransaction
that fetched from the cursor. We might want to change that later.
probably should have been to begin with; this is to cover cases like
needing to recreate the per-db directory during WAL replay.
Also, fix heap_create to force pg_class.reltablespace to be zero instead
of the database's default tablespace; this makes the world safe for
CREATE DATABASE to handle all tables in the default tablespace alike,
as per previous discussion. And force pg_class.reltablespace to zero
when creating a relation without physical storage (eg, a view); this
avoids possibly having dangling references in this column after a
subsequent DROP TABLESPACE.
performance front, but with feature freeze upon us I think it's time to
drive a stake in the ground and say that this will be in 7.5.
Alvaro Herrera, with some help from Tom Lane.
There are various things left to do: contrib dbsize and oid2name modules
need work, and so does the documentation. Also someone should think about
COMMENT ON TABLESPACE and maybe RENAME TABLESPACE. Also initlocation is
dead, it just doesn't know it yet.
Gavin Sherry and Tom Lane.
locking conflict against concurrent CHECKPOINT that was discussed a few
weeks ago. Also, if not using WAL archiving (which is always true ATM
but won't be if PITR makes it into this release), there's no need to
WAL-log the index build process; it's sufficient to force-fsync the
completed index before commit. This seems to gain about a factor of 2
in my tests, which is consistent with writing half as much data. I did
not try it with WAL on a separate drive though --- probably the gain would
be a lot less in that scenario.
temp tables, and avoid WAL-logging truncations of temp tables. Do issue
fsync on truncated files (not sure this is necessary but it seems like
a good idea).
explicitly fsync'ing every (non-temp) file we have written since the
last checkpoint. In the vast majority of cases, the burden of the
fsyncs should fall on the bgwriter process not on backends. (To this
end, we assume that an fsync issued by the bgwriter will force out
blocks written to the same file by other processes using other file
descriptors. Anyone have a problem with that?) This makes the world
safe for WIN32, which ain't even got sync(2), and really makes the world
safe for Unixen as well, because sync(2) never had the semantics we need:
it offers no way to wait for the requested I/O to finish.
Along the way, fix a bug I recently introduced in xlog recovery:
file truncation replay failed to clear bufmgr buffers for the dropped
blocks, which could result in 'PANIC: heap_delete_redo: no block'
later on in xlog replay.
wit: Add a header record to each WAL segment file so that it can be reliably
identified. Avoid splitting WAL records across segment files (this is not
strictly necessary, but makes it simpler to incorporate the header records).
Make WAL entries for file creation, deletion, and truncation (as foreseen but
never implemented by Vadim). Also, add support for making XLOG_SEG_SIZE
configurable at compile time, similarly to BLCKSZ. Fix a couple bugs I
introduced in WAL replay during recent smgr API changes. initdb is forced
due to changes in pg_control contents.
the relcache, and so the notion of 'blind write' is gone. This should
improve efficiency in bgwriter and background checkpoint processes.
Internal restructuring in md.c to remove the not-very-useful array of
MdfdVec objects --- might as well just use pointers.
Also remove the long-dead 'persistent main memory' storage manager (mm.c),
since it seems quite unlikely to ever get resurrected.
- Update comment in IsReservedName() to the present day
- Improve some variable & function names in commands/vacuum.c. I
was planning to rewrite this to avoid lappend(), but since I
still intend to do the list rewrite, there's no need for that.
- Update some smgr comments which seemed to imply that we still
forced all dirty pages to disk at commit-time.
- Replace some #ifdef DIAGNOSTIC code with assertions.
- Make the distinction between OS-level file descriptors and
virtual file descriptors a little clearer in a few comments
- Other minor comment improvements in the smgr code
Adjustable threshold is gone in favor of keeping track of total requested
page storage and doling out proportional fractions to each relation
(with a minimum amount per relation, and some quantization of the results
to avoid thrashing with small changes in page counts). Provide special-
case code for indexes so as not to waste space storing useless page
free space counts. Restructure internal data storage to be a flat array
instead of list-of-chunks; this may cost a little more work in data
copying when reorganizing, but allows binary search to be used during
lookup_fsm_page_entry().
> There's no longer a separate call to heap_storage_create in that routine
> --- the right place to make the test is now in the storage_create
> boolean parameter being passed to heap_create. A simple change, but
> it passeth patch's understanding ...
Thanks.
Attached is a patch against cvs tip as of 8:30 PM PST or so. Turned out
that even after fixing the failed hunks, there was a new spot in
bufmgr.c which needed to be fixed (related to temp relations;
RelationUpdateNumberOfBlocks). But thankfully the regression test code
caught it :-)
Joe Conway
The local buffer manager is no longer used for newly-created relations
(unless they are TEMP); a new non-TEMP relation goes through the shared
bufmgr and thus will participate normally in checkpoints. But TEMP relations
use the local buffer manager throughout their lifespan. Also, operations
in TEMP relations are not logged in WAL, thus improving performance.
Since it's no longer necessary to fsync relations as they move out of the
local buffers into shared buffers, quite a lot of smgr.c/md.c/fd.c code
is no longer needed and has been removed: there's no concept of a dirty
relation anymore in md.c/fd.c, and we never fsync anything but WAL.
Still TODO: improve local buffer management algorithms so that it would
be reasonable to increase NLocBuffer.
o Change all current CVS messages of NOTICE to WARNING. We were going
to do this just before 7.3 beta but it has to be done now, as you will
see below.
o Change current INFO messages that should be controlled by
client_min_messages to NOTICE.
o Force remaining INFO messages, like from EXPLAIN, VACUUM VERBOSE, etc.
to always go to the client.
o Remove INFO from the client_min_messages options and add NOTICE.
Seems we do need three non-ERROR elog levels to handle the various
behaviors we need for these messages.
Regression passed.
now just below FATAL in server_min_messages. Added more text to
highlight ordering difference between it and client_min_messages.
---------------------------------------------------------------------------
REALLYFATAL => PANIC
STOP => PANIC
New INFO level the prints to client by default
New LOG level the prints to server log by default
Cause VACUUM information to print only to the client
NOTICE => INFO where purely information messages are sent
DEBUG => LOG for purely server status messages
DEBUG removed, kept as backward compatible
DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1 added
DebugLvl removed in favor of new DEBUG[1-5] symbols
New server_min_messages GUC parameter with values:
DEBUG[5-1], INFO, NOTICE, ERROR, LOG, FATAL, PANIC
New client_min_messages GUC parameter with values:
DEBUG[5-1], LOG, INFO, NOTICE, ERROR, FATAL, PANIC
Server startup now logged with LOG instead of DEBUG
Remove debug_level GUC parameter
elog() numbers now start at 10
Add test to print error message if older elog() values are passed to elog()
Bootstrap mode now has a -d that requires an argument, like postmaster
existing lock manager and spinlocks: it understands exclusive vs shared
lock but has few other fancy features. Replace most uses of spinlocks
with lightweight locks. All remaining uses of spinlocks have very short
lock hold times (a few dozen instructions), so tweak spinlock backoff
code to work efficiently given this assumption. All per my proposal on
pghackers 26-Sep-01.
useful as yet, since its primary source of information is (full) VACUUM,
which makes a concerted effort to get rid of free space before telling
the map about it ... next stop is concurrent VACUUM ...
stub) into the rest of the system. Adopt a cleaner approach to preventing
deadlock in concurrent heap_updates: allow RelationGetBufferForTuple to
select any page of the rel, and put the onus on it to lock both buffers
in a consistent order. Remove no-longer-needed isExtend hack from
API of ReleaseAndReadBuffer.
do anything yet, but it has the necessary connections to initialization
and so forth. Make some gestures towards allowing number of blocks in
a relation to be BlockNumber, ie, unsigned int, rather than signed int.
(I doubt I got all the places that are sloppy about it, yet.) On the
way, replace the hardwired NLOCKS_PER_XACT fudge factor with a GUC
variable.
not being consulted anywhere, so remove it and remove the _mdnblocks()
calls that were used to set it. Change smgrextend interface to pass in
the target block number (ie, current file length) --- the caller always
knows this already, having already done smgrnblocks(), so it's silly to
do it over again inside mdextend. Net result: extension of a file now
takes one lseek(SEEK_END) and a write(), not three lseeks and a write.
(WAL logging for this is not done yet, however.) Clean up a number of really
crufty things that are no longer needed now that DROP behaves nicely. Make
temp table mapper do the right things when drop or rename affecting a temp
table is rolled back. Also, remove "relation modified while in use" error
check, in favor of locking tables at first reference and holding that lock
throughout the statement.