Rather than doing manual book keeping to plan the number of tests to run
in each TAP suite, conclude each run with done_testing() summing up the
the number of tests that ran. This removes the need for maintaning and
updating the plan count at the expense of an accurate count of remaining
during the test suite runtime.
This patch has been discussed a number of times, often in the context of
other patches which updates tests, so a larger number of discussions can
be found in the archives.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/DD399313-3D56-4666-8079-88949DAC870F@yesql.se
Commit 9a974cbcba arranged to preserve
relfilenodes and tablespace OIDs. For similar reasons, also arrange
to preserve database OIDs.
One problem is that, up until now, the OIDs assigned to the template0
and postgres databases have not been fixed. This could be a problem
when upgrading, because pg_upgrade might try to migrate a database
from the old cluster to the new cluster while keeping the OID and find
a different database with that OID, resulting in a failure. If it finds
a database with the same name and the same OID that's OK: it will be
dropped and recreated. But the same OID and a different name is a
problem.
To prevent that, fix the OIDs for postgres and template0 to specific
values less than 16384. To avoid running afoul of this rule, these
values should not be changed in future releases. It's not a problem
that these OIDs aren't fixed in existing releases, because the OIDs
that we're assigning here weren't used for either of these databases
in any previous release. Thus, there's no chance that an upgrade of
a cluster from any previous release will collide with the OIDs we're
assigning here. And going forward, the OIDs will always be fixed, so
the only potential collision is with a system database having the
same name and the same OID, which is OK.
This patch lets users assign a specific OID to a database as well,
provided however that it can't be less than 16384. I (rhaas) thought
it might be better not to expose this capability to users, but the
consensus was otherwise, so the syntax is documented. Letting users
assign OIDs below 16384 would not be OK, though, because a
user-created database with a low-numbered OID might collide with a
system-created database in a future release. We therefore prohibit
that.
Shruthi KC, based on an earlier patch from Antonin Houska, reviewed
and with some adjustments by me.
Discussion: http://postgr.es/m/CA+TgmoYgTwYcUmB=e8+hRHOFA0kkS6Kde85+UNdon6q7bt1niQ@mail.gmail.com
Discussion: http://postgr.es/m/CAASxf_Mnwm1Dh2vd5FAhVX6S1nwNSZUB1z12VddYtM++H2+p7w@mail.gmail.com
The idea here is that when a performance problem is known to have
occurred at a certain point in time, it's a good thing if there is
some information available from the logs to help figure out what
might have happened around that time.
This change attracted an above-average amount of dissent, because
it means that a server with default settings will produce some amount
of log output even if nothing has gone wrong. However, by my count,
the mailing list discussion had about twice as many people in favor
of the change as opposed. The reasons for believing that the extra
log output is not an issue in practice are: (1) the rate at which
messages can be generated by this setting is bounded to one every
few minutes on a properly-configured system and (2) production
systems tend to have a lot more junk in the log from that due to
failed connection attempts, ERROR messages generated by application
activity, and the like.
Bharath Rupireddy, reviewed by Fujii Masao and by me. Many other
people commented on the thread, but as far as I can see that was
discussion of the merits of the change rather than review of the
patch.
Discussion: https://postgr.es/m/CALj2ACX-rW_OeDcp4gqrFUAkf1f50Fnh138dmkd0JkvCNQRKGA@mail.gmail.com
Standardize on xoroshiro128** as our basic PRNG algorithm, eliminating
a bunch of platform dependencies as well as fundamentally-obsolete PRNG
code. In addition, this API replacement will ease replacing the
algorithm again in future, should that become necessary.
xoroshiro128** is a few percent slower than the drand48 family,
but it can produce full-width 64-bit random values not only 48-bit,
and it should be much more trustworthy. It's likely to be noticeably
faster than the platform's random(), depending on which platform you
are thinking about; and we can have non-global state vectors easily,
unlike with random(). It is not cryptographically strong, but neither
are the functions it replaces.
Fabien Coelho, reviewed by Dean Rasheed, Aleksander Alekseev, and myself
Discussion: https://postgr.es/m/alpine.DEB.2.22.394.2105241211230.165418@pseudo
Up to now, you couldn't escape out of psql's \password command
by typing control-C (or other local spelling of SIGINT). This
is pretty user-unfriendly, so improve it. To do so, we have to
modify the functions provided by pg_get_line.c; but we don't
want to mess with psql's SIGINT handler setup, so provide an
API that lets that handler cause the cancel to occur.
This relies on the assumption that we won't do any major harm by
longjmp'ing out of fgets(). While that's obviously a little shaky,
we've long had the same assumption in the main input loop, and few
issues have been reported.
psql has some other simple_prompt() calls that could usefully
be improved the same way; for now, just deal with \password.
Nathan Bossart, minor tweaks by me
Discussion: https://postgr.es/m/747443.1635536754@sss.pgh.pa.us
The five modules in our TAP test framework all had names in the top
level namespace. This is unwise because, even though we're not
exporting them to CPAN, the names can leak, for example if they are
exported by the RPM build process. We therefore move the modules to the
PostgreSQL::Test namespace. In the process PostgresNode is renamed to
Cluster, and TestLib is renamed to Utils. PostgresVersion becomes simply
PostgreSQL::Version, to avoid possible confusion about what it's the
version of.
Discussion: https://postgr.es/m/aede93a4-7d92-ef26-398f-5094944c2504@dunslane.net
Reviewed by Erik Rijkers and Michael Paquier
Per discussion, let's just follow CLDR's default zone mappings
faithfully. There are two changes here that are clear improvements:
* Mapping "Greenwich Standard Time" to Atlantic/Reykjavik is actually
a better fit than using London, because Iceland hasn't observed DST
since 1968, so this is more nearly what people might expect.
* Since the "Samoa" zone is specified to be UTC+13:00, we must map
it to Pacific/Apia not Pacific/Samoa; the latter refers to American
Samoa which is now on the other side of the date line.
The rest of these changes look like they're choosing the most populous
IANA zone as representative. Whatever the details, we're just going
to say "if you don't like this mapping, complain to CLDR".
Discussion: https://postgr.es/m/3266414.1633045628@sss.pgh.pa.us
This corrects a bunch of entries in win32_tzmap[], and adds a few
new ones, based on the CLDR project's windowsZones.xml file.
Non-cosmetic changes fall into four main categories:
* Flat-out errors:
US/Aleutan doesn't exist
America/Salvador doesn't exist
Asia/Baku is wrong for Yerevan
Asia/Dhaka (Bangladesh) is wrong for Astana (Kazakhstan)
Europe/Bucharest is wrong for Chisinau
America/Mexico_City is wrong for Chetumal
America/Buenos_Aires is wrong for Cayenne
America/Caracas has its own zone, so poor fit for La Paz
US/Eastern is wrong for Haiti
US/Eastern is wrong for Indiana (East)
Asia/Karachi is wrong for Tashkent
Etc/UTC+12 doesn't exist
Signs of Etc/GMT zones were backwards
* Judgment calls:
(These changes follow CLDR's choices, except for the first one)
Use Europe/London for "Greenwich Standard Time", since that seems much
more likely than Africa/Casablanca to be what people will think that
zone name means. CLDR has Atlantic/Reykjavik here, but that's no better.
Asia/Shanghai seems a better fit than Hong Kong for "China Standard
Time".
Europe/Sarajevo is now a link to Belgrade, ie "Central Europe Standard
Time"; so use Warsaw for "Central European Standard Time".
America/Sao_Paulo seems more representative than Araguaina for
"E. South America Standard Time".
Africa/Johannesburg seems more representative than Harare for
"South Africa Standard Time".
* New Windows zone names:
"Israel Standard Time"
"Kaliningrad Standard Time"
"Russia Time Zone N" for various N
"Singapore Standard Time"
"South Sudan Standard Time"
"W. Central Africa Standard Time"
"West Bank Standard Time"
"Yukon Standard Time"
Some of these replace older spellings, but I kept the older spellings
too in case our code runs on a machine with the older data.
* Replace aliases (tzdb Links) with underlying city-named zones:
(This tracks tzdb's longstanding practice, and reduces inconsistency
with the rest of the entries, as well as with CLDR.)
US/Alaska
Asia/Kuwait
Asia/Muscat
Canada/Atlantic
Australia/Canberra
Canada/Saskatchewan
US/Central
US/Eastern
US/Hawaii
US/Mountain
Canada/Newfoundland
US/Pacific
Back-patch to all supported branches, as is our usual practice for
time zone data updates.
Discussion: https://postgr.es/m/3266414.1633045628@sss.pgh.pa.us
The original intent seems to have been to sort case-insensitively
by the Windows zone name, but various changes over the years did
not get that memo. This commit just moves a few entries to
restore exact alphabetic order, to ease comparison to the outputs
of processing scripts.
Back-patch to all supported branches, as is our usual practice for
time zone data updates.
Discussion: https://postgr.es/m/3266414.1633045628@sss.pgh.pa.us
This switches the default ACL to what the documentation has recommended
since CVE-2018-1058. Upgrades will carry forward any old ownership and
ACL. Sites that declined the 2018 recommendation should take a fresh
look. Recipes for commissioning a new database cluster from scratch may
need to create a schema, grant more privileges, etc. Out-of-tree test
suites may require such updates.
Reviewed by Peter Eisentraut.
Discussion: https://postgr.es/m/20201031163518.GB4039133@rfd.leadboat.com
The initdb help message for --sync-only was a bit terse, and not
really self-explanatory. Make it clearer that initdb --sync-only
will exit after syncing, and expand the docs with a note on when
the option can be useful. Also align the help output with others
that exit immediately.
Author: Nathan Bossart, Gurjeet Singh
Discussion: https://postgr.es/m/CABwTF4U6hbNNE1bv=LxQdJybmUdZ5NJQ9rKY9tN82NXM8QH+iQ@mail.gmail.com
Neither is actually initialized as an auxiliary process, so it does not really
make sense to reserve a PGPROC etc for them.
This keeps checker mode implemented by exiting partway through bootstrap
mode. That might be worth changing at some point, perhaps if we ever extend
checker mode to be a more general tool.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20210802164124.ufo5buo4apl6yuvs@alap3.anarazel.de
As of v14, pg_depend contains almost 7000 "pin" entries recording
the OIDs of built-in objects. This is a fair amount of bloat for
every database, and it adds time to pg_depend lookups as well as
initdb. We can get rid of all of those entries in favor of an OID
range check, i.e. "OIDs below FirstUnpinnedObjectId are pinned".
(template1 and the public schema are exceptions. Those exceptions
are now wired into IsPinnedObject() instead of initdb's code for
filling pg_depend, but it's the same amount of cruft either way.)
The contents of pg_shdepend are modified likewise.
Discussion: https://postgr.es/m/3737988.1618451008@sss.pgh.pa.us
Commit 4656e3d66 replaced the "#define CLOBBER_CACHE_ALWAYS"
testing mechanism with a GUC, which has been a great help for
doing cache-clobber testing in more efficient ways; but there
is a gap in the implementation. The only way to do cache-clobber
testing during an initdb run is to use the old method with #define,
because one can't set the GUC from outside. Improve this by
adding a switch to initdb for the purpose.
(Perhaps someday we should let initdb pass through arbitrary
"-c NAME=VALUE" switches. Quoting difficulties dissuaded me
from attempting that right now, though.)
Back-patch to v14 where 4656e3d66 came in.
Discussion: https://postgr.es/m/1582507.1624227029@sss.pgh.pa.us
Recent glibc versions have made mktime() fail if tm_isdst is
inconsistent with the prevailing timezone; in particular it fails for
tm_isdst = 1 when the zone is UTC. (This seems wildly inconsistent
with the POSIX-mandated treatment of "incorrect" values for the other
fields of struct tm, so if you ask me it's a bug, but I bet they'll
say it's intentional.) This has been observed to cause cosmetic
problems when pg_restore'ing an archive created in a different
timezone.
To fix, do mktime() using the field values from the archive, and if
that fails try again with tm_isdst = -1. This will give a result
that's off by the UTC-offset difference from the original zone, but
that was true before, too. It's not terribly critical since we don't
do anything with the result except possibly print it. (Someday we
should flush this entire bit of logic and record a standard-format
timestamp in the archive instead. That's not okay for a back-patched
bug fix, though.)
Also, guard our only other use of mktime() by having initdb's
build_time_t() set tm_isdst = -1 not 0. This case could only have
an issue in zones that are DST year-round; but I think some do exist,
or could in future.
Per report from Wells Oliver. Back-patch to all supported
versions, since any of them might need to run with a newer glibc.
Discussion: https://postgr.es/m/CAOC+FBWDhDHO7G-i1_n_hjRzCnUeFO+H-Czi1y10mFhRWpBrew@mail.gmail.com
Invent system_functions.sql to carry the function definitions that
were formerly in system_views.sql. The function definitions were
already a quarter of the file and are about to be more, so it seems
appropriate to give them their own home.
In passing, fix an oversight in dfb75e478: it neglected to call
check_input() for system_constraints.sql.
Discussion: https://postgr.es/m/3956760.1618529139@sss.pgh.pa.us
On Windows, CMD.EXE allegedly does not run a command that uses forward slashes,
so let's convert the path to use backslashes instead.
Backpatch to 10.
Author: Nitin Jadhav <nitinjadhavpostgres@gmail.com>
Reviewed-by: Juan José Santamaría Flecha <juanjo.santamaria@gmail.com>
Discussion: https://postgr.es/m/CAMm1aWaNDuaPYFYMAqDeJrZmPtNvLcJRS++CcZWY8LT6KcoBZw@mail.gmail.com
For those system catalogs that have a unique indexes, make a primary
key and unique constraint, using ALTER TABLE ... PRIMARY KEY/UNIQUE
USING INDEX.
This can be helpful for GUI tools that look for a primary key, and it
might in the future allow declaring foreign keys, for making schema
diagrams.
The constraint creation statements are automatically created by
genbki.pl from DECLARE_UNIQUE_INDEX directives. To specify which one
of the available unique indexes is the primary key, use the new
directive DECLARE_UNIQUE_INDEX_PKEY instead. By convention, we
usually make a catalog's OID column its primary key, if it has one.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/dc5f44d9-5ec1-a596-0251-dadadcdede98@2ndquadrant.com
Specifying this parameter removes the informational messages about how
to start the server. This is intended for use by wrappers in different
packaging systems, where those instructions would most likely be wrong
anyway, but the other output from initdb would still be useful (and thus
just redirecting everything to /dev/null would be bad).
Author: Magnus Hagander
Reviewed-By: Peter Eisentraut
Discusion: https://postgr.es/m/CABUevEzo4t5bmTXF0_B9WzmuWpVbMpkNZZiGvzV8NZa-=fPqeQ@mail.gmail.com
Since at least 2001 we've used putenv() and avoided setenv(), on the
grounds that the latter was unportable and not in POSIX. However,
POSIX added it that same year, and by now the situation has reversed:
setenv() is probably more portable than putenv(), since POSIX now
treats the latter as not being a core function. And setenv() has
cleaner semantics too. So, let's reverse that old policy.
This commit adds a simple src/port/ implementation of setenv() for
any stragglers (we have one in the buildfarm, but I'd not be surprised
if that code is never used in the field). More importantly, extend
win32env.c to also support setenv(). Then, replace usages of putenv()
with setenv(), and get rid of some ad-hoc implementations of setenv()
wannabees.
Also, adjust our src/port/ implementation of unsetenv() to follow the
POSIX spec that it returns an error indicator, rather than returning
void as per the ancient BSD convention. I don't feel a need to make
all the call sites check for errors, but the portability stub ought
to match real-world practice.
Discussion: https://postgr.es/m/2065122.1609212051@sss.pgh.pa.us
The patch needs test cases, reorganization, and cfbot testing.
Technically reverts commits 5c31afc49d..e35b2bad1a (exclusive/inclusive)
and 08db7c63f3..ccbe34139b.
Reported-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/E1ktAAG-0002V2-VB@gemulon.postgresql.org
This adds a key management system that stores (currently) two data
encryption keys of length 128, 192, or 256 bits. The data keys are
AES256 encrypted using a key encryption key, and validated via GCM
cipher mode. A command to obtain the key encryption key must be
specified at initdb time, and will be run at every database server
start. New parameters allow a file descriptor open to the terminal to
be passed. pg_upgrade support has also been added.
Discussion: https://postgr.es/m/CA+fd4k7q5o6Nc_AaX6BcYM9yqTbC6_pnH-6nSD=54Zp6NBQTCQ@mail.gmail.com
Discussion: https://postgr.es/m/20201202213814.GG20285@momjian.us
Author: Masahiko Sawada, me, Stephen Frost
The BKI file's string quoting conventions were previously quite weird,
perhaps as a result of repurposing a function built to scan
single-quoted strings to scan double-quoted ones. Change to use the
same rules as we use in GUC files, allowing some simplifications in
genbki.pl and initdb.c.
While at it, completely remove the backend's scanstr() function, which
was essentially a duplicate of the string dequoting code in guc-file.l.
Instead export that one (under a less generic name than it had) and let
bootscanner.l use it. Now we can clarify that scansup.c exists only to
support the main lexer. We could alternatively have removed GUC_scanstr,
but this way seems better since the previous arrangement could mislead
a reader into thinking that scanstr() had something to do with the main
lexer's handling of string literals. Maybe it did once, but if so it
was a long time ago.
This patch does not bump catversion, since the initially-installed
catalog contents don't change. Note however that successful initdb
after applying this patch will require up-to-date postgres.bki as well
as postgres and initdb executables.
In passing, remove a bunch of very-long-obsolete #include's in
bootparse.y and bootscanner.l.
John Naylor
Discussion: https://postgr.es/m/CACPNZCtDpd18T0KATTmCggO2GdVC4ow86ypiq5ENff1VnauL8g@mail.gmail.com
Further experience says that the appending behavior offered by
pg_get_line_append is useful to only a very small minority of callers.
For most, the requirement to reset the buffer after each line is just
an error-prone nuisance. Hence, invent another alternative call
pg_get_line_buf, which takes care of that detail.
Noted while reviewing a patch from Daniel Gustafsson.
Discussion: https://postgr.es/m/48A4FA71-524E-41B9-953A-FD04EF36E2E7@yesql.se
Letting the caller provide a StringInfo to read into is helpful when
the caller needs to merge lines or otherwise modify the data after
it's been read. Notably, now the code added by commit 8f8154a50
can use pg_get_line_append() instead of having its own copy of that
logic. A follow-on commit will also make use of this.
Also, since StringInfo buffers are a minimum of 1KB long, blindly
using pg_get_line() in a loop can eat a lot more memory than one would
expect. I discovered for instance that commit e0f05cd5b caused initdb
to consume circa 10MB to read postgres.bki, even though that's under
1MB worth of data. A less memory-hungry alternative is to re-use the
same StringInfo for all lines and pg_strdup the results.
Discussion: https://postgr.es/m/1315832.1599345736@sss.pgh.pa.us
At some point back in the last century, somebody felt that reading
all of pg_type twice was cheaper, or at least easier, than using
repalloc() to resize the Typ[] array dynamically. That seems like an
entirely wacko proposition, so rewrite the code to do it the other
way. (To add insult to injury, there were two not-quite-identical
copies of said code.)
initdb.c's readfile() function had the same disease of preferring
to do double the I/O to avoid resizing its output array. Here,
we can make things easier by using the just-invented pg_get_line()
function to handle reading individual lines without a predetermined
notion of how long they are.
On my machine, it's difficult to detect any net change in the
overall runtime of initdb from these changes; but they should
help on slower buildfarm machines (especially since a buildfarm
cycle involves a lot of initdb's these days).
My attention was drawn to these places by scan-build complaints,
but on inspection they needed a lot more work than just suppressing
dead stores :-(
This patch started out with the goal of harmonizing various arbitrary
limits on password length, but after awhile a better idea emerged:
let's just get rid of those fixed limits.
recv_password_packet() has an arbitrary limit on the packet size,
which we don't really need, so just drop it. (Note that this doesn't
really affect anything for MD5 or SCRAM password verification, since
those will hash the user's password to something shorter anyway.
It does matter for auth methods that require a cleartext password.)
Likewise remove the arbitrary error condition in pg_saslprep().
The remaining limits are mostly in client-side code that prompts
for passwords. To improve those, refactor simple_prompt() so that
it allocates its own result buffer that can be made as big as
necessary. Actually, it proves best to make a separate routine
pg_get_line() that has essentially the semantics of fgets(), except
that it allocates a suitable result buffer and hence will never
return a truncated line. (pg_get_line has a lot of potential
applications to replace randomly-sized fgets buffers elsewhere,
but I'll leave that for another patch.)
I built pg_get_line() atop stringinfo.c, which requires moving
that code to src/common/; but that seems fine since it was a poor
fit for src/port/ anyway.
This patch is mostly mine, but it owes a good deal to Nathan Bossart
who pressed for a solution to the password length problem and
created a predecessor patch. Also thanks to Peter Eisentraut and
Stephen Frost for ideas and discussion.
Discussion: https://postgr.es/m/09512C4F-8CB9-4021-B455-EF4C4F0D55A0@amazon.com
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
Daniel Gustafsson
Robert Haas
Bruce Momjian
Tom Lane
Peter Eisentraut
Andrew Dunstan
Noah Misch
Andres Freund
Alvaro Herrera
Magnus Hagander
Michael Paquier