The new numeric code for extract epoch from interval accidentally
truncated the DAYS_PER_YEAR value to an integer, leading to results
that mismatched the floating-point interval_part calculations.
The commit a2da77cdb4 that introduced
this actually contains the regression test change that this reverts.
I suppose this was missed at the time.
Reported-by: Joseph Koshakow <koshy44@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/CAAvxfHd5n%3D13NYA2q_tUq%3D3%3DSuWU-CufmTf-Ozj%3DfrEgt7pXwQ%40mail.gmail.com
This function gave the wrong answer when there's more than one
RegisteredSnapshots entry, whether or not any of them is the
CatalogSnapshot. This leads to assertion failure in some scenarios
involving fetching toasted data using a cursor. (As per discussion,
I'm dubious that this is the right contract to be enforcing at all;
but it surely doesn't help to be enforcing it incorrectly.)
Fetching toasted data using a cursor is evidently under-tested,
so add a test case too.
Per report from Erik Rijkers. This is new code, so no need for
back-patch.
Discussion: https://postgr.es/m/dc9dd229-ed30-6c62-4c41-d733ffff776b@xs4all.nl
If a partitioned table has partitions owned by roles other than the
owner of the partitioned table, don't include them in the to-be-
clustered list. This is similar to what VACUUM FULL does (except we do
it sooner, because there is no reason to postpone it). Add a simple
test to verify that only owned partitions are clustered.
While at it, change memory context switch-and-back to occur once per
partition instead of outside of the loop.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20220411140609.GF26620@telsasoft.com
This is to gather some more evidence about why buildfarm member wrasse
is failing. We should revert it (or at least scale it way back) once
that's resolved.
Discussion: https://postgr.es/m/1346227.1649887693@sss.pgh.pa.us
There was a small buglet in commit 52e4f0cd47 whereby a tuple acquired
from cache was not released, giving rise to WARNING messages; fix that.
While at it, restructure the code a bit on stylistic grounds.
Author: Hou zj <houzj.fnst@fujitsu.com>
Reported-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CAHut+PvKTyhTBtYCQsP6Ph7=o-oWRSX+v+PXXLXp81-o2bazig@mail.gmail.com
Commit f4fb45d15c misguidedly tried to free some state during aggregate
finalization for json_objectagg. This resulted in attempts to access
freed memory, especially when the function is used as a window function.
Commit 4eb9798879 attempted to ameliorate that, but in fact it should
just be ripped out, which is done here. Also add some regression tests
for json_objectagg in various flavors as a window function.
Original report from Jaime Casanova, diagnosis by Andres Freund.
Discussion: https://postgr.es/m/YkfeMNYRCGhySKyg@ahch-to
We were setting MERGE source subplan's targetlist by expanding the
individual attributes of the source relation completely, early in the
parse analysis phase. This failed to work when the condition of an
action included a whole-row reference, causing setrefs.c to error out
with
ERROR: variable not found in subplan target lists
because at that point there is nothing to resolve the whole-row
reference with. We can fix this by having preprocess_targetlist expand
the source targetlist for Vars required from the source rel by all
actions. Moreover, by using this expansion mechanism we can do away
with the targetlist expansion in transformMergeStmt, which is good
because then we no longer pull in columns that aren't needed for
anything.
Add a test case for the problem.
While at it, remove some redundant code in preprocess_targetlist():
MERGE was doing separately what is already being done for UPDATE/DELETE,
so we can just rely on the latter and remove the former. (The handling
of inherited rels was different for MERGE, but that was a no-longer-
necessary hack.)
Fix outdated, related comments for fix_join_expr also.
Author: Richard Guo <guofenglinux@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Joe Wildish <joe@lateraljoin.com>
Discussion: https://postgr.es/m/fab3b90a-914d-46a9-beb0-df011ee39ee5@www.fastmail.com
These are usually not useful since users will use packaged
distributions and won't be interested in rebuilding their installation
from source. Also, we have only used these kinds of hints for some
features and in some places, not consistently throughout.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/2552aed7-d0e9-280a-54aa-2dc7073f371d%40enterprisedb.com
Previously, the output of EXPLAIN (BUFFERS) option showed only the I/O
timing spent reading and writing shared and local buffers. This commit
adds on top of that the I/O timing for temporary buffers in the output
of EXPLAIN (for spilled external sorts, hashes, materialization. etc).
This can be helpful for users in cases where the I/O related to
temporary buffers is the bottleneck.
Like its cousin, this information is available only when track_io_timing
is enabled. Playing the patch, this is showing an extra overhead of up
to 1% even when using gettimeofday() as implementation for interval
timings, which is slightly within the usual range noise still that's
measurable.
Author: Masahiko Sawada
Reviewed-by: Georgios Kokolatos, Melanie Plageman, Julien Rouhaud,
Ranier Vilela
Discussion: https://postgr.es/m/CAD21AoAJgotTeP83p6HiAGDhs_9Fw9pZ2J=_tYTsiO5Ob-V5GQ@mail.gmail.com
- subscriber stats reset path was untested
- slot stat sreset path for all slots was untested
- pg_stat_database.sessions etc was untested
- pg_stat_reset_shared() was untested, for any kind of shared stats
- pg_stat_reset() was untested
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Window functions such as row_number() always return a value higher than
the previously returned value for tuples in any given window partition.
Traditionally queries such as;
SELECT * FROM (
SELECT *, row_number() over (order by c) rn
FROM t
) t WHERE rn <= 10;
were executed fairly inefficiently. Neither the query planner nor the
executor knew that once rn made it to 11 that nothing further would match
the outer query's WHERE clause. It would blindly continue until all
tuples were exhausted from the subquery.
Here we implement means to make the above execute more efficiently.
This is done by way of adding a pg_proc.prosupport function to various of
the built-in window functions and adding supporting code to allow the
support function to inform the planner if the window function is
monotonically increasing, monotonically decreasing, both or neither. The
planner is then able to make use of that information and possibly allow
the executor to short-circuit execution by way of adding a "run condition"
to the WindowAgg to allow it to determine if some of its execution work
can be skipped.
This "run condition" is not like a normal filter. These run conditions
are only built using quals comparing values to monotonic window functions.
For monotonic increasing functions, quals making use of the btree
operators for <, <= and = can be used (assuming the window function column
is on the left). You can see here that once such a condition becomes false
that a monotonic increasing function could never make it subsequently true
again. For monotonically decreasing functions the >, >= and = btree
operators for the given type can be used for run conditions.
The best-case situation for this is when there is a single WindowAgg node
without a PARTITION BY clause. Here when the run condition becomes false
the WindowAgg node can simply return NULL. No more tuples will ever match
the run condition. It's a little more complex when there is a PARTITION
BY clause. In this case, we cannot return NULL as we must still process
other partitions. To speed this case up we pull tuples from the outer
plan to check if they're from the same partition and simply discard them
if they are. When we find a tuple belonging to another partition we start
processing as normal again until the run condition becomes false or we run
out of tuples to process.
When there are multiple WindowAgg nodes to evaluate then this complicates
the situation. For intermediate WindowAggs we must ensure we always
return all tuples to the calling node. Any filtering done could lead to
incorrect results in WindowAgg nodes above. For all intermediate nodes,
we can still save some work when the run condition becomes false. We've
no need to evaluate the WindowFuncs anymore. Other WindowAgg nodes cannot
reference the value of these and these tuples will not appear in the final
result anyway. The savings here are small in comparison to what can be
saved in the top-level WingowAgg, but still worthwhile.
Intermediate WindowAgg nodes never filter out tuples, but here we change
WindowAgg so that the top-level WindowAgg filters out tuples that don't
match the intermediate WindowAgg node's run condition. Such filters
appear in the "Filter" clause in EXPLAIN for the top-level WindowAgg node.
Here we add prosupport functions to allow the above to work for;
row_number(), rank(), dense_rank(), count(*) and count(expr). It appears
technically possible to do the same for min() and max(), however, it seems
unlikely to be useful enough, so that's not done here.
Bump catversion
Author: David Rowley
Reviewed-by: Andy Fan, Zhihong Yu
Discussion: https://postgr.es/m/CAApHDvqvp3At8++yF8ij06sdcoo1S_b2YoaT9D4Nf+MObzsrLQ@mail.gmail.com
Plain \dconfig is basically equivalent to SHOW except that you can
give it a pattern with wildcards, either to match multiple GUCs or
because you don't exactly remember the name you want.
\dconfig+ adds type, context, and access-privilege information,
mainly because every other kind of object privilege has a psql command
to show it, so GUC privileges should too. (A form of this command was
in some versions of the patch series leading up to commit a0ffa885e.
We pulled it out then because of doubts that the design and code were
up to snuff, but I think subsequent work has resolved that.)
In passing, fix incorrect completion of GUC names in GRANT/REVOKE
ON PARAMETER: a0ffa885e neglected to use the VERBATIM form of
COMPLETE_WITH_QUERY, so it misbehaved for custom (qualified) GUC
names.
Mark Dilger and Tom Lane
Discussion: https://postgr.es/m/3118455.1649267333@sss.pgh.pa.us
Add support for unlogged sequences. Unlike for unlogged tables, this
is not a performance feature. It allows sequences associated with
unlogged tables to be excluded from replication.
A new subcommand ALTER SEQUENCE ... SET LOGGED/UNLOGGED is added.
An identity/serial sequence now automatically gets and follows the
persistence level (logged/unlogged) of its owning table. (The
sequences owned by temporary tables were already temporary through the
separate mechanism in RangeVarAdjustRelationPersistence().) But you
can still change the persistence of an owned sequence separately.
Also, pg_dump and pg_upgrade preserve the persistence of existing
sequences.
Discussion: https://www.postgresql.org/message-id/flat/04e12818-2f98-257c-b926-2845d74ed04f%402ndquadrant.com
Introduce a new GUC recovery_prefetch. When enabled, look ahead in the
WAL and try to initiate asynchronous reading of referenced data blocks
that are not yet cached in our buffer pool. For now, this is done with
posix_fadvise(), which has several caveats. Since not all OSes have
that system call, "try" is provided so that it can be enabled where
available. Better mechanisms for asynchronous I/O are possible in later
work.
Set to "try" for now for test coverage. Default setting to be finalized
before release.
The GUC wal_decode_buffer_size limits the distance we can look ahead in
bytes of decoded data.
The existing GUC maintenance_io_concurrency is used to limit the number
of concurrent I/Os allowed, based on pessimistic heuristics used to
infer that I/Os have begun and completed. We'll also not look more than
maintenance_io_concurrency * 4 block references ahead.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com> (earlier version)
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier version)
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> (earlier version)
Tested-by: Tomas Vondra <tomas.vondra@2ndquadrant.com> (earlier version)
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com> (earlier version)
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com> (earlier version)
Tested-by: Sait Talha Nisanci <Sait.Nisanci@microsoft.com> (earlier version)
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
In the stats collector days it was hard to write tests for the stats system,
because fundamentally delivery of stats messages over UDP was not
synchronous (nor guaranteed). Now we easily can force pending stats updates to
be flushed synchronously.
This moves stats.sql into a parallel group, there isn't a reason for it to run
in isolation anymore. And it may shake out some bugs.
Bumps catversion.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Previously the statistics collector received statistics updates via UDP and
shared statistics data by writing them out to temporary files regularly. These
files can reach tens of megabytes and are written out up to twice a
second. This has repeatedly prevented us from adding additional useful
statistics.
Now statistics are stored in shared memory. Statistics for variable-numbered
objects are stored in a dshash hashtable (backed by dynamic shared
memory). Fixed-numbered stats are stored in plain shared memory.
The header for pgstat.c contains an overview of the architecture.
The stats collector is not needed anymore, remove it.
By utilizing the transactional statistics drop infrastructure introduced in a
prior commit statistics entries cannot "leak" anymore. Previously leaked
statistics were dropped by pgstat_vacuum_stat(), called from [auto-]vacuum. On
systems with many small relations pgstat_vacuum_stat() could be quite
expensive.
Now that replicas drop statistics entries for dropped objects, it is not
necessary anymore to reset stats when starting from a cleanly shut down
replica.
Subsequent commits will perform some further code cleanup, adapt docs and add
tests.
Bumps PGSTAT_FILE_FORMAT_ID.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: "David G. Johnston" <david.g.johnston@gmail.com>
Reviewed-By: Tomas Vondra <tomas.vondra@2ndquadrant.com> (in a much earlier version)
Reviewed-By: Arthur Zakirov <a.zakirov@postgrespro.ru> (in a much earlier version)
Reviewed-By: Antonin Houska <ah@cybertec.at> (in a much earlier version)
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
Discussion: https://postgr.es/m/20210319235115.y3wz7hpnnrshdyv6@alap3.anarazel.de
The column 'subskiplsn' uses TYPALIGN_DOUBLE (which has 4 bytes alignment
on AIX) for storage. But the C Struct (Form_pg_subscription) has 8-byte
alignment for this field, so retrieving it from storage causes an
unaligned read.
To fix this, we rearranged the 'subskiplsn' column in the catalog so that
it naturally comes at an 8-byte boundary.
We have fixed a similar problem in commit f3b421da5f. This patch adds a
test to avoid a similar mistake in the future.
Reported-by: Noah Misch
Diagnosed-by: Noah Misch, Masahiko Sawada, Amit Kapila
Author: Masahiko Sawada
Reviewed-by: Noah Misch, Amit Kapila
Discussion: https://postgr.es/m/20220401074423.GC3682158@rfd.leadboat.comhttps://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
Soon the stats collector will be no more, with statistics instead getting
stored in shared memory. There are a lot of references to the stats collector
in comments. This commit replaces most of these references with "cumulative
statistics system", with the remaining ones getting replaced as part of
subsequent commits.
This is done separately from the - quite large - shared memory statistics
patch to make review easier.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
The test created a 1m row table in order to test parallel operation of
JSON_VALUE. However, this was more than were needed for the test, so
save time by halving it, and also by making the table unlogged.
Experimentation shows that this size is only a little above the number
required to generate the expected output.
Per gripe from Andres Freund
Discussion: https://postgr.es/m/20220406022118.3ocqvhxr6kciw5am@alap3.anarazel.de
These clauses allow the user to specify how data from nested paths are
joined, allowing considerable freedom in shaping the tabular output of
JSON_TABLE.
PLAN DEFAULT allows the user to specify the global strategies when
dealing with sibling or child nested paths. The is often sufficient to
achieve the necessary goal, and is considerably simpler than the full
PLAN clause, which allows the user to specify the strategy to be used
for each named nested path.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zhihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/7e2cb85d-24cf-4abb-30a5-1a33715959bd@postgrespro.ru
This feature allows jsonb data to be treated as a table and thus used in
a FROM clause like other tabular data. Data can be selected from the
jsonb using jsonpath expressions, and hoisted out of nested structures
in the jsonb to form multiple rows, more or less like an outer join.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zhihong Yu (whose
name I previously misspelled), Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby.
Discussion: https://postgr.es/m/7e2cb85d-24cf-4abb-30a5-1a33715959bd@postgrespro.ru
Previously, psql printed only the last result if a command string
returned multiple result sets. Now it prints all of them. The
previous behavior can be obtained by setting the psql variable
SHOW_ALL_RESULTS to off.
This is a significantly enhanced version of
3a51306722 (that was later reverted).
There is also much more test coverage for various psql features now.
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: "Iwata, Aya" <iwata.aya@jp.fujitsu.com> (earlier version)
Reviewed-by: Daniel Verite <daniel@manitou-mail.org> (earlier version)
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com> (earlier version)
Reviewed-by: vignesh C <vignesh21@gmail.com> (earlier version)
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.21.1904132231510.8961@lancre
datetime.c's parsing logic has assumed that strtod() will accept
a string that looks like ".", which it does in glibc, but not on
some less-common platforms such as AIX. The result of this was
that datetime fields like "123." would be accepted on some platforms
but not others; which is a sufficiently odd case that it's not that
surprising we've heard no field complaints. But commit e39f99046
extended that assumption to new places, and happened to add a test
case that exposed the platform dependency. Remove this dependency
by special-casing situations without any digits after the decimal
point.
(Again, this is in part a pre-existing bug but I don't feel a
compulsion to back-patch.)
Also, rearrange e39f99046's changes in formatting.c to avoid a
Coverity complaint that we were copying an uninitialized field.
Discussion: https://postgr.es/m/1592893.1648969747@sss.pgh.pa.us
DecodeInterval (interval input) was careless about integer-overflow
hazards, allowing bogus results to be obtained for sufficiently
large input values. Also, since it initially converted the input
to a "struct tm", it was impossible to produce the full range of
representable interval values.
Meanwhile, EncodeInterval (interval output) and a few other
functions could suffer failures if asked to process sufficiently
large interval values, because they also relied on being able to
represent an interval in "struct tm" which is not designed to
handle that.
Fix all this stuff by introducing new struct types that are more
fit for purpose.
While this is clearly a bug fix, it's also an API break for any
code that's calling these functions directly. So back-patching
doesn't seem wise, especially in view of the lack of field
complaints.
Joe Koshakow, editorialized a bit by me
Discussion: https://postgr.es/m/CAAvxfHff0JLYHwyBrtMx_=6wr=k2Xp+D+-X3vEhHjJYMj+mQcg@mail.gmail.com
Cover some cases that would have been broken by a proposed patch,
but we failed to notice for lack of test coverage. I'm pushing
this separately mainly to memorialize that it *is* our historical
behavior.
Discussion: https://postgr.es/m/1344498.1648920056@sss.pgh.pa.us
This is essentially the same as applying VACUUM FULL to a partitioned
table, which has been supported since commit 3c3bb99330 (March 2017).
While there's no great use case in applying CLUSTER to partitioned
tables, we don't have any strong reason not to allow it either.
For now, partitioned indexes cannot be marked clustered, so an index
must always be specified.
While at it, rename some variables that were RangeVars during the
development that led to 8bc717cb88 but never made it that way to the
source tree; there's no need to perpetuate names that have always been
more confusing than helpful.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/20201028003312.GU9241@telsasoft.com
Discussion: https://postgr.es/m/20200611153502.GT14879@telsasoft.com
The buildfarm has revealed some instability in results from catalog
queries in tests from commit 1a36bc9dba. Cure this by adding ORDER BY
to such queries.
This patch is extracted from a larger patch that allowed setting the
default returned value from these functions to json or jsonb. That had
problems, but this piece of it is fine. For these functions only json or
jsonb can be specified in the RETURNING clause.
Extracted from an original patch from Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
When evaluating a query with a multi-column GROUP BY clause using sort,
the cost may be heavily dependent on the order in which the keys are
compared when building the groups. Grouping does not imply any ordering,
so we're allowed to compare the keys in arbitrary order, and a Hash Agg
leverages this. But for Group Agg, we simply compared keys in the order
as specified in the query. This commit explores alternative ordering of
the keys, trying to find a cheaper one.
In principle, we might generate grouping paths for all permutations of
the keys, and leave the rest to the optimizer. But that might get very
expensive, so we try to pick only a couple interesting orderings based
on both local and global information.
When planning the grouping path, we explore statistics (number of
distinct values, cost of the comparison function) for the keys and
reorder them to minimize comparison costs. Intuitively, it may be better
to perform more expensive comparisons (for complex data types etc.)
last, because maybe the cheaper comparisons will be enough. Similarly,
the higher the cardinality of a key, the lower the probability we’ll
need to compare more keys. The patch generates and costs various
orderings, picking the cheapest ones.
The ordering of group keys may interact with other parts of the query,
some of which may not be known while planning the grouping. E.g. there
may be an explicit ORDER BY clause, or some other ordering-dependent
operation, higher up in the query, and using the same ordering may allow
using either incremental sort or even eliminate the sort entirely.
The patch generates orderings and picks those minimizing the comparison
cost (for various pathkeys), and then adds orderings that might be
useful for operations higher up in the plan (ORDER BY, etc.). Finally,
it always keeps the ordering specified in the query, on the assumption
the user might have additional insights.
This introduces a new GUC enable_group_by_reordering, so that the
optimization may be disabled if needed.
The original patch was proposed by Teodor Sigaev, and later improved and
reworked by Dmitry Dolgov. Reviews by a number of people, including me,
Andrey Lepikhov, Claudio Freire, Ibrar Ahmed and Zhihong Yu.
Author: Dmitry Dolgov, Teodor Sigaev, Tomas Vondra
Reviewed-by: Tomas Vondra, Andrey Lepikhov, Claudio Freire, Ibrar Ahmed, Zhihong Yu
Discussion: https://postgr.es/m/7c79e6a5-8597-74e8-0671-1c39d124c9d6%40sigaev.ru
Discussion: https://postgr.es/m/CA%2Bq6zcW_4o2NC0zutLkOJPsFt80megSpX_dVRo6GK9PC-Jx_Ag%40mail.gmail.com
This Patch introduces three SQL standard JSON functions:
JSON() (incorrectly mentioned in my commit message for f4fb45d15c)
JSON_SCALAR()
JSON_SERIALIZE()
JSON() produces json values from text, bytea, json or jsonb values, and
has facilitites for handling duplicate keys.
JSON_SCALAR() produces a json value from any scalar sql value, including
json and jsonb.
JSON_SERIALIZE() produces text or bytea from input which containis or
represents json or jsonb;
For the most part these functions don't add any significant new
capabilities, but they will be of use to users wanting standard
compliant JSON handling.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
COPY FROM supports the HEADER option to silently discard the header
line from a CSV or text file. It is possible to load by mistake a
file that matches the expected format, for example, if two text
columns have been swapped, resulting in garbage in the database.
This adds a new option value HEADER MATCH that checks the column names
in the header line against the actual column names and errors out if
they do not match.
Author: Rémi Lapeyre <remi.lapeyre@lenstra.fr>
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/CAF1-J-0PtCWMeLtswwGV2M70U26n4g33gpe1rcKQqe6wVQDrFA@mail.gmail.com
This introduces the SQL/JSON functions for querying JSON data using
jsonpath expressions. The functions are:
JSON_EXISTS()
JSON_QUERY()
JSON_VALUE()
All of these functions only operate on jsonb. The workaround for now is
to cast the argument to jsonb.
JSON_EXISTS() tests if the jsonpath expression applied to the jsonb
value yields any values. JSON_VALUE() must return a single value, and an
error occurs if it tries to return multiple values. JSON_QUERY() must
return a json object or array, and there are various WRAPPER options for
handling scalar or multi-value results. Both these functions have
options for handling EMPTY and ERROR conditions.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
This view is similar to pg_hba_file_rules view, except that it is
associated with the parsing of pg_ident.conf. Similarly to its cousin,
this view is useful to check via SQL if changes planned in pg_ident.conf
would work upon reload or restart, or to diagnose a previous failure.
Bumps catalog version.
Author: Julien Rouhaud
Reviewed-by: Aleksander Alekseev, Michael Paquier
Discussion: https://postgr.es/m/20220223045959.35ipdsvbxcstrhya@jrouhaud
The regression tests include a query to check the execution path of
pg_hba_file_rules, but it has never checked that a given cluster has
correct contents in pg_hba.conf. This commit extends the query of
pg_hba_file_rules to report any errors if anything bad is found. For
EXEC_BACKEND builds, any connection attempt would fail when loading
pg_hba.conf if any incorrect content is found when parsed, so a failure
would be detected before even running this query. However, this can
become handy for clusters where pg_hba.conf can be reloaded, where new
connection attempts are not subject to a fresh loading of pg_hba.conf.
Author: Julien Rouhaud, based on an idea from me
Discussion: https://postgr.es/m/YkFhpydhyeNNo3Xl@paquier.xyz
This patch intrdocuces the SQL standard IS JSON predicate. It operates
on text and bytea values representing JSON as well as on the json and
jsonb types. Each test has an IS and IS NOT variant. The tests are:
IS JSON [VALUE]
IS JSON ARRAY
IS JSON OBJECT
IS JSON SCALAR
IS JSON WITH | WITHOUT UNIQUE KEYS
These are mostly self-explanatory, but note that IS JSON WITHOUT UNIQUE
KEYS is true whenever IS JSON is true, and IS JSON WITH UNIQUE KEYS is
true whenever IS JSON is true except it IS JSON OBJECT is true and there
are duplicate keys (which is never the case when applied to jsonb values).
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Commit f9fd176461 effectively gave
every role ADMIN OPTION on itself. However, this appears to be
something that happened accidentally as a result of refactoring
work rather than an intentional decision. Almost a decade later,
it was discovered that this was a security vulnerability. As a
result, commit fea164a72a restricted
this implicit ADMIN OPTION privilege to be exercisable only when
the role being administered is the same as the session user and
when no security-restricted operation is in progress. That
commit also documented the existence of this implicit privilege
for what seems to be the first time.
The effect of the privilege is to allow a login role to grant
the privileges of that role, and optionally ADMIN OPTION on it,
to some other role. That's an unusual thing to do, because generally
membership is granted in roles used as groups, rather than roles
used as users. Therefore, it does not seem likely that removing
the privilege will break things for many PostgreSQL users.
However, it will make it easier to reason about the permissions
system. This is the only case where a user who has not been given any
special permission (superuser, or ADMIN OPTION on some role) can
modify role membership, so removing it makes things more consistent.
For example, if a superuser sets up role A and B and grants A to B
but no other privileges to anyone, she can now be sure that no one
else will be able to revoke that grant. Without this change, that
would have been true only if A was a non-login role.
Patch by me. Reviewed by Tom Lane and Stephen Frost.
Discussion: http://postgr.es/m/CA+Tgmoawdt03kbA+dNyBcNWJpRxu0f4X=69Y3+DkXXZqmwMDLg@mail.gmail.com
MERGE performs actions that modify rows in the target table using a
source table or query. MERGE provides a single SQL statement that can
conditionally INSERT/UPDATE/DELETE rows -- a task that would otherwise
require multiple PL statements. For example,
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular tables, partitioned tables and inheritance
hierarchies, including column and row security enforcement, as well as
support for row and statement triggers and transition tables therein.
MERGE is optimized for OLTP and is parameterizable, though also useful
for large scale ETL/ELT. MERGE is not intended to be used in preference
to existing single SQL commands for INSERT, UPDATE or DELETE since there
is some overhead. MERGE can be used from PL/pgSQL.
MERGE does not support targetting updatable views or foreign tables, and
RETURNING clauses are not allowed either. These limitations are likely
fixable with sufficient effort. Rewrite rules are also not supported,
but it's not clear that we'd want to support them.
Author: Pavan Deolasee <pavan.deolasee@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Simon Riggs <simon.riggs@enterprisedb.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions)
Reviewed-by: Peter Geoghegan <pg@bowt.ie> (earlier versions)
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Reviewed-by: Japin Li <japinli@hotmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
Discussion: https://postgr.es/m/20201231134736.GA25392@alvherre.pgsql
Per ECMAScript standard (ECMA-262, referenced by SQL standard), the
syntax forms
.1
1.
should be allowed for decimal numeric literals, but the existing
implementation rejected them.
Also, by the same standard, reject trailing junk after numeric
literals.
Note that the ECMAScript standard for numeric literals is in respects
like these slightly different from the JSON standard, which might be
the original cause for this discrepancy.
A change is that this kind of syntax is now rejected:
1.type()
This needs to be written as
(1).type()
This is correct; normal JavaScript also does not accept this syntax.
We also need to fix up the jsonpath output function for this case. We
put parentheses around numeric items if they are followed by another
path item.
Reviewed-by: Nikita Glukhov <n.gluhov@postgrespro.ru>
Discussion: https://www.postgresql.org/message-id/flat/50a828cc-0a00-7791-7883-2ed06dfb2dbb@enterprisedb.com
pg_stat_get_replication_slot() accidentally was marked as non-strict, crashing
when called with NULL input. As it's already released, introduce an explicit
NULL check in 14, fix the catalog in HEAD.
Bumps catversion in HEAD.
Discussion: https://postgr.es/m/20220326212432.s5n2maw6kugnpyxw@alap3.anarazel.de
Backpatch: 14-, where replication slot stats were introduced
This patch introduces the SQL/JSON standard constructors for JSON:
JSON()
JSON_ARRAY()
JSON_ARRAYAGG()
JSON_OBJECT()
JSON_OBJECTAGG()
For the most part these functions provide facilities that mimic
existing json/jsonb functions. However, they also offer some useful
additional functionality. In addition to text input, the JSON() function
accepts bytea input, which it will decode and constuct a json value from.
The other functions provide useful options for handling duplicate keys
and null values.
This series of patches will be followed by a consolidated documentation
patch.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
This allows specifying an optional column list when adding a table to
logical replication. The column list may be specified after the table
name, enclosed in parentheses. Columns not included in this list are not
sent to the subscriber, allowing the schema on the subscriber to be a
subset of the publisher schema.
For UPDATE/DELETE publications, the column list needs to cover all
REPLICA IDENTITY columns. For INSERT publications, the column list is
arbitrary and may omit some REPLICA IDENTITY columns. Furthermore, if
the table uses REPLICA IDENTITY FULL, column list is not allowed.
The column list can contain only simple column references. Complex
expressions, function calls etc. are not allowed. This restriction could
be relaxed in the future.
During the initial table synchronization, only columns included in the
column list are copied to the subscriber. If the subscription has
several publications, containing the same table with different column
lists, columns specified in any of the lists will be copied.
This means all columns are replicated if the table has no column list
at all (which is treated as column list with all columns), or when of
the publications is defined as FOR ALL TABLES (possibly IN SCHEMA that
matches the schema of the table).
For partitioned tables, publish_via_partition_root determines whether
the column list for the root or the leaf relation will be used. If the
parameter is 'false' (the default), the list defined for the leaf
relation is used. Otherwise, the column list for the root partition
will be used.
Psql commands \dRp+ and \d <table-name> now display any column lists.
Author: Tomas Vondra, Alvaro Herrera, Rahila Syed
Reviewed-by: Peter Eisentraut, Alvaro Herrera, Vignesh C, Ibrar Ahmed,
Amit Kapila, Hou zj, Peter Smith, Wang wei, Tang, Shi yu
Discussion: https://postgr.es/m/CAH2L28vddB_NFdRVpuyRBJEBWjz4BSyTB=_ektNRH8NJ1jf95g@mail.gmail.com
Commit 75b1521dae added support for logical replication of sequences,
including grammar changes, but it did not update preprocess_pubobj_list
accordingly. This can cause segfaults with "continuations", i.e. when
command specifies a list of objects:
CREATE PUBLICATION p FOR SEQUENCE s1, s2;
Reported by Amit Kapila, patch by me.
Reported-by: Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1JxDNKGBSNTyN-Xj2JRjzFo+ziSqJbjH==vuO0YF_CQrg@mail.gmail.com
A TOAST table can normally have only one index, but there are corner
cases where it has more; for example, transiently during REINDEX
CONCURRENTLY. In such a case, the pg_statio_all_tables view produced
multiple rows for the owning table, one per TOAST index. Refactor the
view to avoid that, instead summing the stats across all the indexes,
as we do for regular table indexes.
While this has been wrong for a long time, back-patching seems unwise
due to the difficulty of putting a system view change into back
branches.
Andrei Zubkov, tweaked a bit by me
Discussion: https://postgr.es/m/acefef4189706971fc475f912c1afdab1c48d627.camel@moonset.ru
This commit adds support for decoding of sequences to the built-in
replication (the infrastructure was added by commit 0da92dc530).
The syntax and behavior mostly mimics handling of tables, i.e. a
publication may be defined as FOR ALL SEQUENCES (replicating all
sequences in a database), FOR ALL SEQUENCES IN SCHEMA (replicating
all sequences in a particular schema) or individual sequences.
To publish sequence modifications, the publication has to include
'sequence' action. The protocol is extended with a new message,
describing sequence increments.
A new system view pg_publication_sequences lists all the sequences
added to a publication, both directly and indirectly. Various psql
commands (\d and \dRp) are improved to also display publications
including a given sequence, or sequences included in a publication.
Author: Tomas Vondra, Cary Huang
Reviewed-by: Peter Eisentraut, Amit Kapila, Hannu Krosing, Andres
Freund, Petr Jelinek
Discussion: https://postgr.es/m/d045f3c2-6cfb-06d3-5540-e63c320df8bc@enterprisedb.com
Discussion: https://postgr.es/m/1710ed7e13b.cd7177461430746.3372264562543607781@highgo.ca
A security invoker view checks permissions for accessing its
underlying base relations using the privileges of the user of the
view, rather than the privileges of the view owner. Additionally, if
any of the base relations are tables with RLS enabled, the policies of
the user of the view are applied, rather than those of the view owner.
This allows views to be defined without giving away additional
privileges on the underlying base relations, and matches a similar
feature available in other database systems.
It also allows views to operate more naturally with RLS, without
affecting the assignments of policies to users.
Christoph Heiss, with some additional hacking by me. Reviewed by
Laurenz Albe and Wolfgang Walther.
Discussion: https://postgr.es/m/b66dd6d6-ad3e-c6f2-8b90-47be773da240%40cybertec.at
This feature allows skipping the transaction on subscriber nodes.
If incoming change violates any constraint, logical replication stops
until it's resolved. Currently, users need to either manually resolve the
conflict by updating a subscriber-side database or by using function
pg_replication_origin_advance() to skip the conflicting transaction. This
commit introduces a simpler way to skip the conflicting transactions.
The user can specify LSN by ALTER SUBSCRIPTION ... SKIP (lsn = XXX),
which allows the apply worker to skip the transaction finished at
specified LSN. The apply worker skips all data modification changes within
the transaction.
Author: Masahiko Sawada
Reviewed-by: Takamichi Osumi, Hou Zhijie, Peter Eisentraut, Amit Kapila, Shi Yu, Vignesh C, Greg Nancarrow, Haiying Tang, Euler Taveira
Discussion: https://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
The planner needs to treat GroupingFunc like Aggref for many purposes,
in particular with respect to processing of the argument expressions,
which are not to be evaluated at runtime. A few places hadn't gotten
that memo, notably including subselect.c's processing of outer-level
aggregates. This resulted in assertion failures or wrong plans for
cases in which a GROUPING() construct references an outer aggregation
level.
Also fix missing special cases for GroupingFunc in cost_qual_eval
(resulting in wrong cost estimates for GROUPING(), although it's
not clear that that would affect plan shapes in practice) and in
ruleutils.c (resulting in excess parentheses in pretty-print mode).
Per bug #17088 from Yaoguang Chen. Back-patch to all supported
branches.
Richard Guo, Tom Lane
Discussion: https://postgr.es/m/17088-e33882b387de7f5c@postgresql.org
For GENERATED columns, we record all dependencies of the generation
expression as AUTO dependencies of the column itself. This means
that the generated column is silently dropped if any dependency
is removed, even if CASCADE wasn't specified. This is at least
a POLA violation, but I think it's actually based on a misreading
of the standard. The standard does say that you can't drop a
dependent GENERATED column in RESTRICT mode; but that's buried down
in a subparagraph, on a different page from some pseudocode that
makes it look like an AUTO drop is being suggested.
Change this to be more like the way that we handle regular default
expressions, ie record the dependencies as NORMAL dependencies of
the pg_attrdef entry. Also, make the pg_attrdef entry's dependency
on the column itself be INTERNAL not AUTO. That has two effects:
* the column will go away, not just lose its default, if any
dependency of the expression is dropped with CASCADE. So we
don't need any special mechanism to make that happen.
* it provides an additional cross-check preventing someone from
dropping the default expression without dropping the column.
catversion bump because of change in the contents of pg_depend
(which also requires a change in one information_schema view).
Per bug #17439 from Kevin Humphreys. Although this is a longstanding
bug, it seems impractical to back-patch because of the need for
catalog contents changes.
Discussion: https://postgr.es/m/17439-7df4421197e928f0@postgresql.org
When an update on a partitioned table referenced in foreign key
constraints causes a row to move from one partition to another,
the fact that the move is implemented as a delete followed by an insert
on the target partition causes the foreign key triggers to have
surprising behavior. For example, a given foreign key's delete trigger
which implements the ON DELETE CASCADE clause of that key will delete
any referencing rows when triggered for that internal DELETE, although
it should not, because the referenced row is simply being moved from one
partition of the referenced root partitioned table into another, not
being deleted from it.
This commit teaches trigger.c to skip queuing such delete trigger events
on the leaf partitions in favor of an UPDATE event fired on the root
target relation. Doing so is sensible because both the old and the new
tuple "logically" belong to the root relation.
The after trigger event queuing interface now allows passing the source
and the target partitions of a particular cross-partition update when
registering the update event for the root partitioned table. Along with
the two ctids of the old and the new tuple, the after trigger event now
also stores the OIDs of those partitions. The tuples fetched from the
source and the target partitions are converted into the root table
format, if necessary, before they are passed to the trigger function.
The implementation currently has a limitation that only the foreign keys
pointing into the query's target relation are considered, not those of
its sub-partitioned partitions. That seems like a reasonable
limitation, because it sounds rare to have distinct foreign keys
pointing to sub-partitioned partitions instead of to the root table.
This misbehavior stems from commit f56f8f8da6 (which added support for
foreign keys to reference partitioned tables) not paying sufficient
attention to commit 2f17844104 (which had introduced cross-partition
updates a year earlier). Even though the former commit goes back to
Postgres 12, we're not backpatching this fix at this time for fear of
destabilizing things too much, and because there are a few ABI breaks in
it that we'd have to work around in older branches. It also depends on
commit f4566345cf, which had its own share of backpatchability issues
as well.
Author: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Eduard Català <eduard.catala@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqFvkBCmfwkQX_yBqv2Wz8ugUGiBDxum8=WvVbfU1TXaNg@mail.gmail.com
Discussion: https://postgr.es/m/CAL54xNZsLwEM1XCk5yW9EqaRzsZYHuWsHQkA2L5MOSKXAwviCQ@mail.gmail.com
b048326 has added support for SET ACCESS METHOD in ALTER TABLE, but it
has missed a few things for materialized views:
- No documentation for this clause on the ALTER MATERIALIZED VIEW page.
- psql tab completion missing.
- No regression tests.
This commit closes the gap on all the points listed above.
Author: Yugo Nagata
Discussion: https://postgr.es/m/20220316133337.5dc9740abfa24c25ec9f67f5@sraoss.co.jp
The clauses SET TABLESPACE and ALL IN TABLESPACE are supported in ALTER
MATERIALIZED VIEW for a long time, and they behave mostly like ALTER
TABLE by reusing the same code paths, but there were zero tests for
them. This commit closes the gap with new tests in tablespace.sql.
Author: Yugo Nagata
Discussion: https://postgr.es/m/20220316133337.5dc9740abfa24c25ec9f67f5@sraoss.co.jp
The output of table_to_xmlschema() and allied functions includes
a regex describing valid values for these types ... but the regex
was itself invalid, as it failed to escape a literal "+" sign.
Report and fix by Renan Soares Lopes. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/7f6fabaa-3f8f-49ab-89ca-59fbfe633105@me.com
In commit bf7ca1587, I had the bright idea that we could make the
result of a whole-row Var (that is, foo.*) track any column aliases
that had been applied to the FROM entry the Var refers to. However,
that's not terribly logically consistent, because now the output of
the Var is no longer of the named composite type that the Var claims
to emit. bf7ca1587 tried to handle that by changing the output
tuple values to be labeled with a blessed RECORD type, but that's
really pretty disastrous: we can wind up storing such tuples onto
disk, whereupon they're not readable by other sessions.
The only practical fix I can see is to give up on what bf7ca1587
tried to do, and say that the column names of tuples produced by
a whole-row Var are always those of the underlying named composite
type, query aliases or no. While this introduces some inconsistencies,
it removes others, so it's not that awful in the abstract. What *is*
kind of awful is to make such a behavioral change in a back-patched
bug fix. But corrupt data is worse, so back-patched it will be.
(A workaround available to anyone who's unhappy about this is to
introduce an extra level of sub-SELECT, so that the whole-row Var is
referring to the sub-SELECT's output and not to a named table type.
Then the Var is of type RECORD to begin with and there's no issue.)
Per report from Miles Delahunty. The faulty commit dates to 9.5,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/2950001.1638729947@sss.pgh.pa.us
This adds the option to use ICU as the default locale provider for
either the whole cluster or a database. New options for initdb,
createdb, and CREATE DATABASE are used to select this.
Since some (legacy) code still uses the libc locale facilities
directly, we still need to set the libc global locale settings even if
ICU is otherwise selected. So pg_database now has three
locale-related fields: the existing datcollate and datctype, which are
always set, and a new daticulocale, which is only set if ICU is
selected. A similar change is made in pg_collation for consistency,
but in that case, only the libc-related fields or the ICU-related
field is set, never both.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5e756dd6-0e91-d778-96fd-b1bcb06c161a%402ndquadrant.com
Using this system function with an in-place tablespace (created when
allow_in_place_tablespaces is enabled by specifying an empty string as
location) caused a failure when using readlink(), as the tablespace is,
in this case, not a symbolic link in pg_tblspc/ but a directory.
Rather than getting a failure, the commit changes
pg_tablespace_location() so as a relative path to the data directory is
returned for in-place tablespaces, to make a difference between
tablespaces created when allow_in_place_tablespaces is enabled or not.
Getting a path rather than an empty string that would match the CREATE
TABLESPACE command in this case is more useful for tests that would like
to rely on this function.
While on it, a regression test is added for this case. This is simple
to add in the main regression test suite thanks to regexp_replace() to
mask the part of the tablespace location dependent on its OID.
Author: Michael Paquier
Reviewed-by: Kyotaro Horiguchi, Thomas Munro
Discussion: https://postgr.es/m/YiG1RleON1WBcLnX@paquier.xyz
This system function was being triggered once in the main regression
test suite to check its SRF configuration, and more in other test
modules but nothing checked the behavior of the options missing_ok and
include_dot_dirs. This commit adds some tests for both options, to
avoid mistakes if this code is manipulated in the future.
Extracted from a larger patch by the same author, with a few tweaks by
me.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20191227170220.GE12890@telsasoft.com
The upper case versions "OF", "TZH", and "TZM" are already supported,
and all other format codes that are supported in upper case are also
supported in lower case, so we should support these as well for
consistency.
Nitin Jadhav, with a tiny cosmetic change by me. Reviewed by Suraj
Kharage and David Zhang.
Discussion: http://postgr.es/m/CAMm1aWZ-oZyKd75+8D=VJ0sAoSwtdXWLP-MAWD4D8R1Dgandzw@mail.gmail.com
Logical replication apply workers for a subscription can easily get stuck
in an infinite loop of attempting to apply a change, triggering an error
(such as a constraint violation), exiting with the error written to the
subscription server log, and restarting.
To partially remedy the situation, this patch adds a new subscription
option named 'disable_on_error'. To be consistent with old behavior, this
option defaults to false. When true, both the tablesync worker and apply
worker catch any errors thrown and disable the subscription in order to
break the loop. The error is still also written in the logs.
Once the subscription is disabled, users can either manually resolve the
conflict/error or skip the conflicting transaction by using
pg_replication_origin_advance() function. After resolving the conflict,
users need to enable the subscription to allow apply process to proceed.
Author: Osumi Takamichi and Mark Dilger
Reviewed-by: Greg Nancarrow, Vignesh C, Amit Kapila, Wang wei, Tang Haiying, Peter Smith, Masahiko Sawada, Shi Yu
Discussion : https://postgr.es/m/DB35438F-9356-4841-89A0-412709EBD3AB%40enterprisedb.com
Starting in cc50080a82 create_index test fails when run with
synchronous_commit=off. synchronous_commit=off delays when hint bits may be
set. Some plans change depending on the number of all-visible pages, which in
turn can be influenced by the delayed hint bits.
Force synchronous_commit to `on` in test_setup.sql. Not very satisfying, but
there's no obvious alternative.
Reported-By: Aleksander Alekseev <aleksander@timescale.com>
Author: Andres Freund <andres@anarazel.de>
Author: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://www.postgresql.org/message-id/flat/CAJ7c6TPJNof1Q+vJsy3QebgbPgXdu2ErPvYkBdhD6_Ckv5EZRg@mail.gmail.com
Commit 8b069ef5d changed this function to look at pg_constraint.conindid
rather than searching pg_depend. That was a good performance improvement,
but it failed to preserve the exact semantics. The old code would only
return an index that was "owned by" (internally dependent on) the
specified constraint, whereas the new code will also return indexes that
are just referenced by foreign key constraints. This confuses ALTER
TABLE, which was implicitly expecting the previous semantics, into
failing with errors like
ERROR: relation 146621 has multiple clustered indexes
or
ERROR: "pk_attbl" is not an index for table "atref"
We can fix this without reverting the performance improvement by adding
a contype check in get_constraint_index(). Another way could be to
make ALTER TABLE check it, but I'm worried that extension code could
also have subtle dependencies on the old semantics.
Tom Lane and Japin Li, per bug #17409 from Holly Roberts.
Back-patch to v14 where the error crept in.
Discussion: https://postgr.es/m/17409-52871dda8b5741cb@postgresql.org
Commit 52e4f0cd47 didn't add tests for pg_dump support, so add a few tests
for it. Additionally, verify that catalogs are updated after few
ALTER PUBLICATION commands that modify row filters by using \d.
Reported-by: Tomas Vondra
Author: Shi yu, based on initial by Tomas Vondra
Reviewed-by: Euler Taveira and Amit Kapila
Discussion: https://postgr.es/m/6bdbd7fc-e81a-9a77-d963-24adeb95f29e@enterprisedb.com
This code seems to have been written on the assumption that
"unsigned long" is 32 bits; or at any rate it ignored the
possibility of conversion overflow. Rewrite, borrowing some
logic from oidin().
Discussion: https://postgr.es/m/3441768.1646343914@sss.pgh.pa.us
It was decided (refer to the Discussion link below) that the stats
collector is not an appropriate place to store the error information of
subscription workers.
This patch changes the pg_stat_subscription_workers view (introduced by
commit 8d74fc96db) so that it stores only statistics counters:
apply_error_count and sync_error_count, and has one entry for
each subscription. The removed error information such as error-XID and
the error message would be stored in another way in the future which is
more reliable and persistent.
After removing these error details, there is no longer any relation
information, so the subscription statistics are now a cluster-wide
statistics.
The patch also changes the view name to pg_stat_subscription_stats since
the word "worker" is an implementation detail that we use one worker for
one tablesync and one apply.
Author: Masahiko Sawada, based on suggestions by Andres Freund
Reviewed-by: Peter Smith, Haiying Tang, Takamichi Osumi, Amit Kapila
Discussion: https://postgr.es/m/20220125063131.4cmvsxbz2tdg6g65@alap3.anarazel.de
justify_interval, justify_hours, and justify_days didn't check for
overflow when promoting hours to days or days to months; but that's
possible when the upper field's value is already large. Detect and
report any such overflow.
Also, we can avoid unnecessary overflow in some cases in justify_interval
by pre-justifying the days field. (Thanks to Nathan Bossart for this
idea.)
Joe Koshakow
Discussion: https://postgr.es/m/CAAvxfHeNqsJ2xYFbPUf_8nNQUiJqkag04NW6aBQQ0dbZsxfWHA@mail.gmail.com
This feature adds row filtering for publication tables. When a publication
is defined or modified, an optional WHERE clause can be specified. Rows
that don't satisfy this WHERE clause will be filtered out. This allows a
set of tables to be partially replicated. The row filter is per table. A
new row filter can be added simply by specifying a WHERE clause after the
table name. The WHERE clause must be enclosed by parentheses.
The row filter WHERE clause for a table added to a publication that
publishes UPDATE and/or DELETE operations must contain only columns that
are covered by REPLICA IDENTITY. The row filter WHERE clause for a table
added to a publication that publishes INSERT can use any column. If the
row filter evaluates to NULL, it is regarded as "false". The WHERE clause
only allows simple expressions that don't have user-defined functions,
user-defined operators, user-defined types, user-defined collations,
non-immutable built-in functions, or references to system columns. These
restrictions could be addressed in the future.
If you choose to do the initial table synchronization, only data that
satisfies the row filters is copied to the subscriber. If the subscription
has several publications in which a table has been published with
different WHERE clauses, rows that satisfy ANY of the expressions will be
copied. If a subscriber is a pre-15 version, the initial table
synchronization won't use row filters even if they are defined in the
publisher.
The row filters are applied before publishing the changes. If the
subscription has several publications in which the same table has been
published with different filters (for the same publish operation), those
expressions get OR'ed together so that rows satisfying any of the
expressions will be replicated.
This means all the other filters become redundant if (a) one of the
publications have no filter at all, (b) one of the publications was
created using FOR ALL TABLES, (c) one of the publications was created
using FOR ALL TABLES IN SCHEMA and the table belongs to that same schema.
If your publication contains a partitioned table, the publication
parameter publish_via_partition_root determines if it uses the partition's
row filter (if the parameter is false, the default) or the root
partitioned table's row filter.
Psql commands \dRp+ and \d <table-name> will display any row filters.
Author: Hou Zhijie, Euler Taveira, Peter Smith, Ajin Cherian
Reviewed-by: Greg Nancarrow, Haiying Tang, Amit Kapila, Tomas Vondra, Dilip Kumar, Vignesh C, Alvaro Herrera, Andres Freund, Wei Wang
Discussion: https://www.postgresql.org/message-id/flat/CAHE3wggb715X%2BmK_DitLXF25B%3DjE6xyNCH4YOwM860JR7HarGQ%40mail.gmail.com
Commit 75d22069e tried to throw a warning for setting a custom GUC whose
prefix belongs to a previously-loaded extension, if there is no such GUC
defined by the extension. But that caused unstable behavior with
parallel workers, because workers don't necessarily load extensions and
GUCs in the same order their leader did. To make that work safely, we
have to completely disallow the case. We now actually remove any such
GUCs at the time of initial extension load, and then throw an error not
just a warning if you try to add one later. While this might create a
compatibility issue for a few people, the improvement in error-detection
capability seems worth it; it's hard to believe that there's any good
use-case for choosing such GUC names.
This also un-reverts 5609cc01c (Rename EmitWarningsOnPlaceholders() to
MarkGUCPrefixReserved()), since that function's old name is now even
more of a misnomer.
Florin Irion and Tom Lane
Discussion: https://postgr.es/m/1902182.1640711215@sss.pgh.pa.us
Double the default setting for hash_mem_multiplier, from 1.0 to 2.0.
This setting makes hash-based executor nodes use twice the usual
work_mem limit.
The PostgreSQL 15 release notes should have a compatibility note about
this change.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wzndc_ROk6CY-bC6p9O53q974Y0Ey4WX8jcPbuTZYM4Q3A@mail.gmail.com
After this, the PostgreSQL lexers no longer accept numeric literals
with trailing non-digits, such as 123abc, which would be scanned as
two tokens: 123 and abc. This is undocumented and surprising, and it
might also interfere with some extended numeric literal syntax being
contemplated for the future.
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/b239564c-cad0-b23e-c57e-166d883cb97d@enterprisedb.com
checkViewTupleDesc() didn't get the memo that it should verify
same attcollation along with same type/typmod. (A quick scan
did not find other similar oversights.)
Per bug #17404 from Pierre-Aurélien Georges. On another day
I might've back-patched this, but today I'm feeling paranoid
about unnecessary behavioral changes in back branches.
Discussion: https://postgr.es/m/17404-8a4a270ef30a6709@postgresql.org
PostgreSQL currently accepts numeric literals with trailing
non-digits, such as 123abc where the abc is treated as the next token.
This may be a bit surprising. This commit adds test cases for this;
subsequent commits intend to change this behavior.
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/b239564c-cad0-b23e-c57e-166d883cb97d@enterprisedb.com
This adds to database objects the same version tracking that collation
objects have. There is a new pg_database column datcollversion that
stores the version, a new function
pg_database_collation_actual_version() to get the version from the
operating system, and a new subcommand ALTER DATABASE ... REFRESH
COLLATION VERSION.
This was not originally added together with pg_collation.collversion,
since originally version tracking was only supported for ICU, and ICU
on a database-level is not currently supported. But we now have
version tracking for glibc (since PG13), FreeBSD (since PG14), and
Windows (since PG13), so this is useful to have now.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/f0ff3190-29a3-5b39-a179-fa32eee57db6%40enterprisedb.com
Some of the queries in the "sanity" tests in the regression test suite
(opr_sanity, type_sanity) are very confusing. One main stumbling
block is that for some probably ancient reason many of the older
queries are written with correlation names p1, p2, etc. independent of
the name of the catalog. This one is a good example:
SELECT p1.oid, p1.oprname, p2.oid, p2.proname
FROM pg_operator AS p1, pg_proc AS p2 <-- HERE
WHERE p1.oprcode = p2.oid AND
p1.oprkind = 'l' AND
(p2.pronargs != 1
OR NOT binary_coercible(p2.prorettype, p1.oprresult)
OR NOT binary_coercible(p1.oprright, p2.proargtypes[0])
OR p1.oprleft != 0);
This is better written as
SELECT o1.oid, o1.oprname, p1.oid, p1.proname
FROM pg_operator AS o1, pg_proc AS p1
WHERE o1.oprcode = p1.oid AND
o1.oprkind = 'l' AND
(p1.pronargs != 1
OR NOT binary_coercible(p1.prorettype, o1.oprresult)
OR NOT binary_coercible(o1.oprright, p1.proargtypes[0])
OR o1.oprleft != 0);
This patch cleans up all the queries in this manner.
(As in the above case, I kept the digits like o1 and p1 even in cases
where only one of each letter is used in a query. This is mainly to
keep the style consistent.)
Discussion: https://www.postgresql.org/message-id/flat/c538308b-319c-8784-e250-1284d12d5411%40enterprisedb.com
createplan.c tries to save a runtime projection step by specifying
a scan plan node's output as being exactly the table's columns, or
index's columns in the case of an index-only scan, if there is not a
reason to do otherwise. This logic did not previously pay attention
to whether an index's columns are returnable. That worked, sort of
accidentally, until commit 9a3ddeb51 taught setrefs.c to reject plans
that try to read a non-returnable column. I have no desire to loosen
setrefs.c's new check, so instead adjust use_physical_tlist() to not
try to optimize this way when there are non-returnable column(s).
Per report from Ryan Kelly. Like the previous patch, back-patch
to all supported branches.
Discussion: https://postgr.es/m/CAHUie24ddN+pDNw7fkhNrjrwAX=fXXfGZZEHhRuofV_N_ftaSg@mail.gmail.com
Rename create_function_0 to create_function_c, and create_function_3
to create_function_sql, to establish their charters more clearly.
This should also reduce confusion versus our underscore-digit
convention for naming variant expected-files.
I separated this from the previous commit on the premise that keeping
the renaming distinct might make "git blame" tracking easier.
Discussion: https://postgr.es/m/1114748.1640383217@sss.pgh.pa.us
The idea behind this patch is to make it possible to run individual
test scripts without running the entire core test suite. Making all
the scripts completely independent would involve a massive rewrite,
and would probably be worse for coverage of things like concurrent DDL.
So this patch just does what seems practical with limited changes.
The net effect is that any test script can be run after running
limited earlier dependencies:
* all scripts depend on test_setup
* many scripts depend on create_index
* other dependencies are few in number, and are documented in
the parallel_schedule file.
To accomplish this, I chose a small number of commonly-used tables
and moved their creation and filling into test_setup. Later scripts
are expected not to modify these tables' data contents, for fear of
affecting other scripts' results. Also, our former habit of declaring
all C functions in one place is now gone in favor of declaring them
where they're used, if that's just one script, or in test_setup if
necessary.
There's more that could be done to remove some of the remaining
inter-script dependencies, but significantly more-invasive changes
would be needed, and at least for now it doesn't seem worth it.
Discussion: https://postgr.es/m/1114748.1640383217@sss.pgh.pa.us
The SQL standard has been ambiguous about whether null values in
unique constraints should be considered equal or not. Different
implementations have different behaviors. In the SQL:202x draft, this
has been formalized by making this implementation-defined and adding
an option on unique constraint definitions UNIQUE [ NULLS [NOT]
DISTINCT ] to choose a behavior explicitly.
This patch adds this option to PostgreSQL. The default behavior
remains UNIQUE NULLS DISTINCT. Making this happen in the btree code
is pretty easy; most of the patch is just to carry the flag around to
all the places that need it.
The CREATE UNIQUE INDEX syntax extension is not from the standard,
it's my own invention.
I named all the internal flags, catalog columns, etc. in the negative
("nulls not distinct") so that the default PostgreSQL behavior is the
default if the flag is false.
Reviewed-by: Maxim Orlov <orlovmg@gmail.com>
Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/84e5ee1b-387e-9a54-c326-9082674bde78@enterprisedb.com
Teach canonicalize_path() how to strip all unnecessary uses of "."
and "..", replacing the previous ad-hoc code that got rid of only
some such cases. In particular, we can always remove all such
uses from absolute paths.
The proximate reason to do this is that Windows rejects paths
involving ".." in some cases (in particular, you can't put one in a
symlink), so we ought to be sure we don't use ".." unnecessarily.
Moreover, it seems like good cleanup on general principles.
There is other path-munging code that could be simplified now, but
we'll leave that for followup work.
It is tempting to call this a bug fix and back-patch it. On the other
hand, the misbehavior can only be reached if a highly privileged user
does something dubious, so it's not unreasonable to say "so don't do
that". And this patch could result in unexpected behavioral changes,
in case anybody was expecting uses of ".." to stay put. So at least
for now, just put it in HEAD.
Shenhao Wang, editorialized a bit by me
Discussion: https://postgr.es/m/OSBPR01MB4214FA221FFE046F11F2AD74F2D49@OSBPR01MB4214.jpnprd01.prod.outlook.com
The most meaningful flags are shown, which are the ones useful for the
user and for automating and extending the set of tests supported
currently by check_guc.
This script may actually be removed in the future, but we are not
completely sure yet if and how we want to support the remaining sanity
checks performed there, that are now integrated in the main regression
test suite as of this commit.
Thanks also to Peter Eisentraut and Kyotaro Horiguchi for the
discussion.
Bump catalog version.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20211129030833.GJ17618@telsasoft.com
Although select_common_type() has a failure-return convention, an
apparent successful return just provides a type OID that *might* work
as a common supertype; we've not validated that the required casts
actually exist. In the mainstream use-cases that doesn't matter,
because we'll proceed to invoke coerce_to_common_type() on each input,
which will fail appropriately if the proposed common type doesn't
actually work. However, a few callers didn't read the (nonexistent)
fine print, and thought that if they got back a nonzero OID then the
coercions were sure to work.
This affects in particular the recently-added "anycompatible"
polymorphic types; we might think that a function/operator using
such types matches cases it really doesn't. A likely end result
of that is unexpected "ambiguous operator" errors, as for example
in bug #17387 from James Inform. Another, much older, case is that
the parser might try to transform an "x IN (list)" construct to
a ScalarArrayOpExpr even when the list elements don't actually have
a common supertype.
It doesn't seem desirable to add more checking to select_common_type
itself, as that'd just slow down the mainstream use-cases. Instead,
write a separate function verify_common_type that performs the
missing checks, and add a call to that where necessary. Likewise add
verify_common_type_from_oids to go with select_common_type_from_oids.
Back-patch to v13 where the "anycompatible" types came in. (The
symptom complained of in bug #17387 doesn't appear till v14, but
that's just because we didn't get around to converting || to use
anycompatible till then.) In principle the "x IN (list)" fix could
go back all the way, but I'm not currently convinced that it makes
much difference in real-world cases, so I won't bother for now.
Discussion: https://postgr.es/m/17387-5dfe54b988444963@postgresql.org
This fixes a set of issues that have accumulated over the past months
(or years) in various code areas. Most fixes are related to some recent
additions, as of the development of v15.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220124030001.GQ23027@telsasoft.com
Previously, unless we had to add a NOT NULL constraint to the column,
this command resulted in updating only the index's relcache entry.
That's problematic when replication behavior is being driven off the
existence of a primary key: other sessions (and ours too for that
matter) failed to recalculate their opinion of whether the table can
be replicated. Add a relcache invalidation to fix it.
This has been broken since pg_class.relhaspkey was removed in v11.
Before that, updating the table's relhaspkey value sufficed to cause
a cache flush. Hence, backpatch to v11.
Report and patch by Hou Zhijie
Discussion: https://postgr.es/m/OS0PR01MB5716EBE01F112C62F8F9B786947B9@OS0PR01MB5716.jpnprd01.prod.outlook.com
Since the test requires reproducible behavior from VACUUM, and since
DISABLE_PAGE_SKIPPING doesn't actually disable all forms of page
skipping, let's use a temporary table to avoid contention.
Back-patch to 12, like commit 3414099c.
Discussion: https://postgr.es/m/20220120052404.sonrhq3f3qgplpzj%40alap3.anarazel.de
Where we test vacuum_truncate's effects, sometimes this is failing to
truncate as expected on the build farm. That could be explained by page
skipping, so disable it explicitly, with the theory that commit fe246d1c
didn't go far enough.
Back-patch to 12, where the vacuum_truncate tests were added.
Discussion: https://postgr.es/m/CA%2BhUKGLT2UL5_JhmBzUgkdyKfc%3D5J-gJSQJLysMs4rqLUKLAzw%40mail.gmail.com
The original coding (from c33869cc3) failed with "more than one row
returned by a subquery used as an expression" if there were unrelated
triggers of the same tgname on parent partitioned tables. (That's
possible because statement-level triggers don't get inherited.) Fix
by applying LIMIT 1 after sorting the candidates by inheritance level.
Also, wrap the subquery in a CASE so that we don't have to execute it at
all when the trigger is visibly non-inherited. Aside from saving some
cycles, this avoids the need for a confusing and undocumented NULLIF().
While here, tweak the format of the emitted query to look a bit
nicer for "psql -E", and add some explanation of this subquery,
because it badly needs it.
Report and patch by Justin Pryzby (with some editing by me).
Back-patch to v13 where the faulty code came in.
Discussion: https://postgr.es/m/20211217154356.GJ17618@telsasoft.com
Before, SQL-level boolean constants were represented by a string with
a cast, and internal Boolean values in DDL commands were usually
represented by Integer nodes. This takes the place of both of these
uses, making the intent clearer and having some amount of type safety.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/8c1a2e37-c68d-703c-5a83-7a6077f4f997@enterprisedb.com
The need for this was foreseen long ago, but when record_eq
actually became hashable (in commit 01e658fa7), we missed updating
this spot.
Per bug #17363 from Elvis Pranskevichus. Back-patch to v14 where
the faulty commit came in.
Discussion: https://postgr.es/m/17363-f6d42fd0d726be02@postgresql.org
Add pg_statistic_ext_data.stxdinherit flag, so that for each extended
statistics definition we can store two versions of data - one for the
relation alone, one for the whole inheritance tree. This is analogous to
pg_statistic.stainherit, but we failed to include such flag in catalogs
for extended statistics, and we had to work around it (see commits
859b3003de, 36c4bc6e72 and 20b9fa308e).
This changes the relationship between the two catalogs storing extended
statistics objects (pg_statistic_ext and pg_statistic_ext_data). Until
now, there was a simple 1:1 mapping - for each definition there was one
pg_statistic_ext_data row, and this row was inserted while creating the
statistics (and then updated during ANALYZE). With the stxdinherit flag,
we don't know how many rows there will be (child relations may be added
after the statistics object is defined), so there may be up to two rows.
We could make CREATE STATISTICS to always create both rows, but that
seems wasteful - without partitioning we only need stxdinherit=false
rows, and declaratively partitioned tables need only stxdinherit=true.
So we no longer initialize pg_statistic_ext_data in CREATE STATISTICS,
and instead make that a responsibility of ANALYZE. Which is what we do
for regular statistics too.
Patch by me, with extensive improvements and fixes by Justin Pryzby.
Author: Tomas Vondra, Justin Pryzby
Reviewed-by: Tomas Vondra, Justin Pryzby
Discussion: https://postgr.es/m/20210923212624.GI831%40telsasoft.com
Since this test schedule is not run by default, it's next door to
unused. Moreover, its test coverage is very thin, and what there is
is just about entirely superseded by the src/test/recovery tests.
Let's drop it instead of carrying obsolete tests.
Discussion: https://postgr.es/m/3911012.1641246643@sss.pgh.pa.us
Commit 859b3003de disabled building of extended stats for inheritance
trees, to prevent updating the same catalog row twice. While that
resolved the issue, it also means there are no extended stats for
declaratively partitioned tables, because there are no data in the
non-leaf relations.
That also means declaratively partitioned tables were not affected by
the issue 859b3003de addressed, which means this is a regression
affecting queries that calculate estimates for the whole inheritance
tree as a whole (which includes e.g. GROUP BY queries).
But because partitioned tables are empty, we can invert the condition
and build statistics only for the case with inheritance, without losing
anything. And we can consider them when calculating estimates.
It may be necessary to run ANALYZE on partitioned tables, to collect
proper statistics. For declarative partitioning there should no prior
statistics, and it might take time before autoanalyze is triggered. For
tables partitioned by inheritance the statistics may include data from
child relations (if built 859b3003de), contradicting the current code.
Report and patch by Justin Pryzby, minor fixes and cleanup by me.
Backpatch all the way back to PostgreSQL 10, where extended statistics
were introduced (same as 859b3003de).
Author: Justin Pryzby
Reported-by: Justin Pryzby
Backpatch-through: 10
Discussion: https://postgr.es/m/20210923212624.GI831%40telsasoft.com
Since commit 859b3003de we only build extended statistics for individual
relations, ignoring the child relations. This resolved the issue with
updating catalog tuple twice, but we still tried to use the statistics
when calculating estimates for the whole inheritance tree. When the
relations contain very distinct data, it may produce bogus estimates.
This is roughly the same issue 427c6b5b9 addressed ~15 years ago, and we
fix it the same way - by ignoring extended statistics when calculating
estimates for the inheritance tree as a whole. We still consider
extended statistics when calculating estimates for individual child
relations, of course.
This may result in plan changes due to different estimates, but if the
old statistics were not describing the inheritance tree particularly
well it's quite likely the new plans is actually better.
Report and patch by Justin Pryzby, minor fixes and cleanup by me.
Backpatch all the way back to PostgreSQL 10, where extended statistics
were introduced (same as 859b3003de).
Author: Justin Pryzby
Reported-by: Justin Pryzby
Backpatch-through: 10
Discussion: https://postgr.es/m/20210923212624.GI831%40telsasoft.com
Remove the machinery from pg_regress that manages the testtablespace
directory. Instead, use "in-place" tablespaces, because they work
correctly when there is a streaming replica running on the same host.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGKpRWQ9SxdxxDmTBCJoR0YnFpMBe7kyzY8SUQk%2BHeskxg%40mail.gmail.com
Commit 7745bc352 intended to ensure that whole-row Vars would be
printed with "::type" decoration in all contexts where plain
"var.*" notation would result in star-expansion, notably in
ROW() and VALUES() constructs. However, it missed the case of
INSERT with a single-row VALUES, as reported by Timur Khanjanov.
Nosing around ruleutils.c, I found a second oversight: the
code for RowCompareExpr generates ROW() notation without benefit
of an actual RowExpr, and naturally it wasn't in sync :-(.
(The code for FieldStore also does this, but we don't expect that
to generate strictly parsable SQL anyway, so I left it alone.)
Back-patch to all supported branches.
Discussion: https://postgr.es/m/efaba6f9-4190-56be-8ff2-7a1674f9194f@intrans.baku.az
When building append paths, we've been looking only at startup and total
costs for the paths. When building fractional paths that may eliminate
the cheapest one, because it may be dominated by two separate paths (one
for startup, one for total cost).
This extends generate_orderedappend_paths() to also consider which paths
have lowest fractional cost. Currently we only consider paths matching
pathkeys - in the future this may be improved by also considering paths
that are only partially sorted, with an incremental sort on top.
Original report of an issue by Arne Roland, patch by me (based on a
suggestion by Tom Lane).
Reviewed-by: Arne Roland, Zhihong Yu
Discussion: https://postgr.es/m/e8f9ec90-546d-e948-acce-0525f3e92773%40enterprisedb.com
Discussion: https://postgr.es/m/1581042da8044e71ada2d6e3a51bf7bb%40index.de
Previously pg_log_backend_memory_contexts() could request to
log the memory contexts of backends, but not of auxiliary processes
such as checkpointer. This commit enhances the function so that
it can also send the request to auxiliary processes. It's useful to
look at the memory contexts of those processes for debugging purpose
and better understanding of the memory usage pattern of them.
Note that pg_log_backend_memory_contexts() cannot send the request
to logger or statistics collector. Because this logging request
mechanism is based on shared memory but those processes aren't
connected to that.
Author: Bharath Rupireddy
Reviewed-by: Vignesh C, Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACU1nBzpacOK2q=a65S_4+Oaz_rLTsU1Ri0gf7YUmnmhfQ@mail.gmail.com
We disallow altering a column datatype within a regular table,
if the table's rowtype is used as a column type elsewhere,
because we lack code to go around and rewrite the other tables.
This restriction should apply to partitioned tables as well, but it
was not checked because ATRewriteTables and ATPrepAlterColumnType
were not on the same page about who should do it for which relkinds.
Per bug #17351 from Alexander Lakhin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17351-6db1870f3f4f612a@postgresql.org
The ACL is printed when you add + to the command, similarly to
various other psql backslash commands.
Along the way, move the code for this into describe.c,
where it is a better fit (and can share some code).
Pavel Luzanov, reviewed by Georgios Kokolatos
Discussion: https://postgr.es/m/6d722115-6297-bc53-bb7f-5f150e765299@postgrespro.ru
The code-coverage report says that this test doesn't increase
coverage by one single line, which I now realize is because
I made src/test/modules/test_regex/sql/test_regex_utf8.sql
to cover all the code that this would. So really it's pointless
and we should just drop it.
Up to now this has just sat there as a test you could invoke via
EXTRA_TESTS, which of course nobody does. I'm feeling encouraged
because c2e8bd275 hasn't yet broke anything, so let's try making this
run with a suitable guard condition (similar to collate.linux.utf8).
While user-defined triggers defined on a partitioned table have
a catalog definition for both it and its partitions, internal
triggers used by foreign keys defined on partitioned tables only
have a catalog definition for its partitions. This commit fixes
that so that partitioned tables get the foreign key triggers too,
just like user-defined triggers. Moreover, like user-defined
triggers, partitions' internal triggers will now also have their
tgparentid set appropriately. This is to allow subsequent commit(s)
to make the foreign key related events to be fired in some cases
using the parent table triggers instead of those of partitions'.
This also changes what tgisinternal means in some cases. Currently,
it means either that the trigger is an internal implementation object
of a foreign key constraint, or a "child" trigger on a partition
cloned from the trigger on the parent. This commit changes it to
only mean the former to avoid confusion. As for the latter, it can
be told by tgparentid being nonzero, which is now true both for user-
defined and foreign key's internal triggers.
Author: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Arne Roland <A.Roland@index.de>
Discussion: https://postgr.es/m/CA+HiwqG7LQSK+n8Bki8tWv7piHD=PnZro2y6ysU2-28JS6cfgQ@mail.gmail.com
Commit 4ace45677 failed to fix the problem fully, because the
same issue of attempting to fetch a non-returnable index column
can occur when rechecking the indexqual after using a lossy index
operator. Moreover, it broke EXPLAIN for such indexquals (which
indicates a gap in our test cases :-().
Revert the code changes of 4ace45677 in favor of adding a new field
to struct IndexOnlyScan, containing a version of the indexqual that
can be executed against the index-returned tuple without using any
non-returnable columns. (The restrictions imposed by check_index_only
guarantee this is possible, although we may have to recompute indexed
expressions.) Support construction of that during setrefs.c
processing by marking IndexOnlyScan.indextlist entries as resjunk
if they can't be returned, rather than removing them entirely.
(We could alternatively require setrefs.c to look up the IndexOptInfo
again, but abusing resjunk this way seems like a reasonably safe way
to avoid needing to do that.)
This solution isn't great from an API-stability standpoint: if there
are any extensions out there that build IndexOnlyScan structs directly,
they'll be broken in the next minor releases. However, only a very
invasive extension would be likely to do such a thing. There's no
change in the Path representation, so typical planner extensions
shouldn't have a problem.
As before, back-patch to all supported branches.
Discussion: https://postgr.es/m/3179992.1641150853@sss.pgh.pa.us
Discussion: https://postgr.es/m/17350-b5bdcf476e5badbb@postgresql.org
Adjust the error texts used for unrecognized/unsupported datetime
units so that there are just two strings to translate, not two
per datatype. Along the way, follow our usual error message style
of not double-quoting type names, and instead making sure that we
say the name is a type. Fix a couple of places in date.c that
were using the wrong one of "unrecognized" and "unsupported".
Nikhil Benesch, with a bit more editing by me
Discussion: https://postgr.es/m/CAPWqQZTURGixmbMH2_Z3ZtWGA0ANjUb9bwtkkxSxSfDeFHuM6Q@mail.gmail.com
If an index has both returnable and non-returnable columns, and one of
the non-returnable columns is an expression using a Var that is in a
returnable column, then a query returning that expression could result
in an index-only scan plan that attempts to read the non-returnable
column, instead of recomputing the expression from the returnable
column as intended.
To fix, redefine the "indextlist" list of an IndexOnlyScan plan node
as containing null Consts in place of any non-returnable columns.
This solves the problem by preventing setrefs.c from falsely matching
to such entries. The executor is happy since it only cares about the
exposed types of the entries, and ruleutils.c doesn't care because a
correct plan won't reference those entries. I considered some other
ways to prevent setrefs.c from doing the wrong thing, but this way
seems good since (a) it allows a very localized fix, (b) it makes
the indextlist structure more compact in many cases, and (c) the
indextlist is now a more faithful representation of what the index AM
will actually produce, viz. nulls for any non-returnable columns.
This is easier to hit since we introduced included columns, but it's
possible to construct failing examples without that, as per the
added regression test. Hence, back-patch to all supported branches.
Per bug #17350 from Louis Jachiet.
Discussion: https://postgr.es/m/17350-b5bdcf476e5badbb@postgresql.org
The reverted commit attempted to fix SQL specification compliance for
the cases which 6aaaa76bb left. This however broke existing behavior
which takes precedence over spec compliance so revert. The introduced
tests are left after the revert since the codepath isn't well covered.
Per bug report 17346. Backpatch down to 14 where it was introduced.
Reported-by: Andrew Bille <andrewbille@gmail.com>
Discussion: https://postgr.es/m/17346-f72b28bd1a341060@postgresql.org
Commit 75d22069e made SET print a warning if you tried to set an
unrecognized parameter within namespace previously reserved by an
extension. It seems better for that to be an outright error though,
for the same reason that we don't let you set unrecognized unqualified
parameter names. In any case, the preceding implementation was
inefficient and erroneous. Perform the check in a more appropriate
spot, and be more careful about prefix-match cases.
Discussion: https://postgr.es/m/116024.1640111629@sss.pgh.pa.us
"git mv" all the input/*.source and output/*.source files into
the corresponding sql/ and expected/ directories. Then remove
the pg_regress and Makefile infrastructure associated with
dynamic translation.
Discussion: https://postgr.es/m/1655733.1639871614@sss.pgh.pa.us
\getenv fetches the value of an environment variable into a psql
variable. This is the inverse of the \setenv command that was added
over ten years ago. We'd not seen a compelling use-case for \getenv
at the time, but upcoming regression test refactoring provides a
sufficient reason to add it now.
Discussion: https://postgr.es/m/1655733.1639871614@sss.pgh.pa.us
Our previous validator used a traditional algorithm that performed
comparison and branching one byte at a time. It's useful in that
we always know exactly how many bytes we have validated, but that
precision comes at a cost. Input validation can show up prominently
in profiles of COPY FROM, and future improvements to COPY FROM such
as parallelism or faster line parsing will put more pressure on input
validation. Hence, add fast paths for both ASCII and multibyte UTF-8:
Use bitwise operations to check 16 bytes at a time for ASCII. If
that fails, use a "shift-based" DFA on those bytes to handle the
general case, including multibyte. These paths are relatively free
of branches and thus robust against all kinds of byte patterns. With
these algorithms, UTF-8 validation is several times faster, depending
on platform and the input byte distribution.
The previous coding in pg_utf8_verifystr() is retained for short
strings and for when the fast path returns an error.
Review, performance testing, and additional hacking by: Heikki
Linakangas, Vladimir Sitnikov, Amit Khandekar, Thomas Munro, and
Greg Stark
Discussion:
https://www.postgresql.org/message-id/CAFBsxsEV_SzH%2BOLyCiyon%3DiwggSyMh_eF6A3LU2tiWf3Cy2ZQg%40mail.gmail.com
In the wake of commit b073c3ccd, it's necessary to grant create
permissions on the public schema to PUBLIC to get many of the
core regression test scripts to pass. That commit did so via the
quick-n-dirty expedient of adding the GRANT to the tablespace test,
which runs first. This is problematic for single-machine
replication testing, though. The least painful way to run the
regression tests on such a setup is to skip the tablespace test,
and that no longer works.
To fix, let's invent a separate "test_setup" script to run first,
and put the GRANT there. Revert b073c3ccd's changes to
the tablespace.source files.
In the future it might be good to try to reduce coupling between
the various test scripts by having test_setup create widely-used
objects, with the goal that most of the scripts could run after
having run only test_setup. That's going to take some effort,
so this commit just addresses my immediate pain point.
Discussion: https://postgr.es/m/1363170.1639763559@sss.pgh.pa.us
Fix the code changed by commit 5c056b0c2 so that we always generate
RelabelType, not something else, for a cast to unspecified typmod.
Otherwise planner optimizations might not happen.
It appears we missed this point because the previous experiments were
done on type numeric: the parser undesirably generates a call on the
numeric() length-coercion function, but then numeric_support()
optimizes that down to a RelabelType, so that everything seems fine.
It misbehaves for types that have a non-optimized length coercion
function, such as bpchar.
Per report from John Naylor. Back-patch to all supported branches,
as the previous patch eventually was. Unfortunately, that no longer
includes 9.6 ... we really shouldn't put this type of change into a
nearly-EOL branch.
Discussion: https://postgr.es/m/CAFBsxsEfbFHEkouc+FSj+3K1sHipLPbEC67L0SAe-9-da8QtYg@mail.gmail.com
Nobody has filled in these stubs for upwards of twenty years,
so it's time to drop the idea that they might get implemented
any day now. The associated pg_operator and pg_proc entries
are just confusing wastes of space.
Per complaint from Anton Voloshin.
Discussion: https://postgr.es/m/3426566.1638832718@sss.pgh.pa.us
geo_ops.c contains half a dozen functions that are just stubs throwing
ERRCODE_FEATURE_NOT_SUPPORTED. Since it's been like that for more
than twenty years, there's clearly not a lot of interest in filling in
the stubs. However, I'm uncomfortable with deleting poly_distance(),
since every other geometric type supports a distance-to-another-object-
of-the-same-type function. We can easily add this capability by
cribbing from poly_overlap() and path_distance().
It's possible that the (existing) test case for this will show some
numeric instability, but hopefully the buildfarm will expose it if so.
In passing, improve the documentation to try to explain why polygons
are distinct from closed paths in the first place.
Discussion: https://postgr.es/m/3426566.1638832718@sss.pgh.pa.us
The multirange_get_range() function fails when two boundaries of the same
range have different alignments. Fix that by adding proper pointer alignment.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/17300-dced2d01ddeb1f2f%40postgresql.org
Backpatch-through: 14
The test added by 5753d4ee32 relies on statistics collector, and so it
may occasionally fail when the UDP packet gets lost. Some machines may
be susceptible to this, probably depending on load etc.
Move the test to stats.sql, which is known to already have this issue
and people know to ignore it.
Reported-by: Justin Pryzby
Discussion: https://postgr.es/m/CAFp7QwpMRGcDAQumN7onN9HjrJ3u4X3ZRXdGFT0K5G2JWvnbWg%40mail.gmail.com
We publish the child table's data twice for a publication that has both
child and parent tables and is published with publish_via_partition_root
as true. This happens because subscribers will initiate synchronization
using both parent and child tables, since it gets both as separate tables
in the initial table list.
Ensure that pg_publication_tables returns only parent tables in such
cases.
Author: Hou Zhijie
Reviewed-by: Greg Nancarrow, Amit Langote, Vignesh C, Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/OS0PR01MB57167F45D481F78CDC5986F794B99@OS0PR01MB5716.jpnprd01.prod.outlook.com
Extend the foreign key ON DELETE actions SET NULL and SET DEFAULT by
allowing the specification of a column list, like
CREATE TABLE posts (
...
FOREIGN KEY (tenant_id, author_id) REFERENCES users ON DELETE SET NULL (author_id)
);
If a column list is specified, only those columns are set to
null/default, instead of all the columns in the foreign-key
constraint.
This is useful for multitenant or sharded schemas, where the tenant or
shard ID is included in the primary key of all tables but shouldn't be
set to null.
Author: Paul Martinez <paulmtz@google.com>
Discussion: https://www.postgresql.org/message-id/flat/CACqFVBZQyMYJV=njbSMxf+rbDHpx=W=B7AEaMKn8dWn9OZJY7w@mail.gmail.com
We show duplicate values for child tables in publications that have both
child and parent tables and are published with publish_via_partition_root
as false which is not what the user would expect.
We decided not to backpatch this as there is no user complaint about this
and it doesn't seem to be a critical issue.
Author: Hou Zhijie
Reviewed-by: Bharath Rupireddy, Amit Langote, Amit Kapila
Discussion: https://postgr.es/m/OS0PR01MB5716E97F00732B52DC2BBC2594989@OS0PR01MB5716.jpnprd01.prod.outlook.com
This simplifies the code so as it is not necessary anymore for the
caller of parse_subscription_options() to zero SubOpts, holding a
bitmaps of the provided options as well as the default/parsed option
values. This also simplifies some checks related to the options
supported by a command when checking for incompatibilities.
While on it, the errors generated for unsupported combinations with
"slot_name = NONE" are reordered. This may generate a different errors
compared to the previous major versions, but users have to go through
all those errors to get a correct command in this case when using
incorrect values for options "enabled" and "create\slot", so at the end
the resulting command would remain the same.
Author: Peter Smith
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/CAHut+PtXHfLgLHDDJ8ZN5f5Be_37mJoxpEsRg8LNmm4XCr06Rw@mail.gmail.com
psql's lexer has historically deleted dash-dash (single-line) comments
from what's collected and sent to the server. This is inconsistent
with what it does for slash-star comments, and people have complained
before that they wish such comments would be captured in the server log.
Undoing the decision completely seems like too big a behavioral change,
however. In particular, comments on lines preceding the start of a
query are generally not thought of as being part of that query.
What we can do to improve the situation is to capture comments that
are clearly *within* a query, that is after the first non-whitespace,
non-comment token but before the query's ending semicolon or backslash
command. This is a nearly trivial code change, and it affects only a
few regression test results.
(It is tempting to try to apply the same rule to slash-star comments.
But it's hard to see how to do that without getting strange history
behavior for comments that cross lines, especially if the user then
starts a new query on the same line as the star-slash. In view of
the lack of complaints, let's leave that case alone.)
Discussion: https://postgr.es/m/CAJcOf-cAdMVr7azeYR7nWKsNp7qhORzc84rV6d7m7knG5Hrtsw@mail.gmail.com
An extension can already de facto reserve a GUC prefix using
EmitWarningsOnPlaceholders(). But this was only checked against
settings that exist at the time the extension is loaded (or the
extension chooses to call this). No diagnostic is given when a SET
command later uses a nonexisting setting with a custom prefix.
With this change, EmitWarningsOnPlaceholders() saves the prefixes it
reserves in a list, and SET checks when it finds a "placeholder"
setting whether it belongs to a reserved prefix and issues a warning
in that case.
Add a regression test that checks the patch using the "plpgsql"
registered prefix.
Author: Florin Irion <florin.irion@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+HEvJDhWuuTpGTJT9Tgbdzm4QS4EzPAwDBScWK18H2Q=FVJFw@mail.gmail.com
When determining whether an index update may be skipped by using HOT, we
can ignore attributes indexed only by BRIN indexes. There are no index
pointers to individual tuples in BRIN, and the page range summary will
be updated anyway as it relies on visibility info.
This also removes rd_indexattr list, and replaces it with rd_attrsvalid
flag. The list was not used anywhere, and a simple flag is sufficient.
Patch by Josef Simanek, various fixes and improvements by me.
Author: Josef Simanek
Reviewed-by: Tomas Vondra, Alvaro Herrera
Discussion: https://postgr.es/m/CAFp7QwpMRGcDAQumN7onN9HjrJ3u4X3ZRXdGFT0K5G2JWvnbWg%40mail.gmail.com
This commit adds a new system view pg_stat_subscription_workers, that
shows information about any errors which occur during the application of
logical replication changes as well as during performing initial table
synchronization. The subscription statistics entries are removed when the
corresponding subscription is removed.
It also adds an SQL function pg_stat_reset_subscription_worker() to reset
single subscription errors.
The contents of this view can be used by an upcoming patch that skips the
particular transaction that conflicts with the existing data on the
subscriber.
This view can be extended in the future to track other xact related
statistics like the number of xacts committed/aborted for subscription
workers.
Author: Masahiko Sawada
Reviewed-by: Greg Nancarrow, Hou Zhijie, Tang Haiying, Vignesh C, Dilip Kumar, Takamichi Osumi, Amit Kapila
Discussion: https://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
Commit 6aaaa76bb added support for the GRANTED BY clause in GRANT and
REVOKE statements, but missed adding support for checking the role in
the REVOKE ROLE case. Fix by checking that the parsed role matches the
CURRENT_ROLE/CURRENT_USER requirement, and also add some tests for it.
Backpatch to v14 where GRANTED BY support was introduced.
Discussion: https://postgr.es/m/B7F6699A-A984-4943-B9BF-CEB84C003527@yesql.se
Backpatch-through: 14
Replica identities that depend directly on an index rely on a set of
properties, one of them being that all the columns defined in this index
have to be marked as NOT NULL. There was a hole in the logic with ALTER
TABLE DROP NOT NULL, where it was possible to remove the NOT NULL
property of a column part of an index used as replica identity, so block
it to avoid problems with logical decoding down the road.
The same check was already done columns part of a primary key, so the
fix is straight-forward.
Author: Haiying Tang, Hou Zhijie
Reviewed-by: Dilip Kumar, Michael Paquier
Discussion: https://postgr.es/m/OS0PR01MB6113338C102BEE8B2FFC5BD9FB619@OS0PR01MB6113.jpnprd01.prod.outlook.com
Backpatch-through: 10
It's possible that a subplan below a Memoize node contains a parameter
from above the Memoize node. If this parameter changes then cache entries
may become out-dated due to the new parameter value.
Previously Memoize was mistakenly not aware of this. We fix this here by
flushing the cache whenever a parameter that's not part of the cache
key changes.
Bug: #17213
Reported by: Elvis Pranskevichus
Author: David Rowley
Discussion: https://postgr.es/m/17213-988ed34b225a2862@postgresql.org
Backpatch-through: 14, where Memoize was added
Peter Eisentraut
Tom Lane
Alvaro Herrera
Andrew Dunstan
Michael Paquier
Andres Freund
David Rowley
Tomas Vondra
Thomas Munro
Amit Kapila
Robert Haas
Dean Rasheed
Noah Misch
Peter Geoghegan
Alexander Korotkov
Fujii Masao
Daniel Gustafsson
John Naylor