24 hours. This is very helpful for daylight savings time:
select '2005-05-03 00:00:00 EST'::timestamp with time zone + '24 hours';
?column?
----------------------
2005-05-04 01:00:00-04
select '2005-05-03 00:00:00 EST'::timestamp with time zone + '1 day';
?column?
----------------------
2005-05-04 01:00:00-04
Michael Glaesemann
test=> select '4 months'::interval / 5;
?column?
---------------
1 mon -6 days
(1 row)
after:
test=> select '4 months'::interval / 5;
?column?
----------
24 days
(1 row)
The problem was the use of rint() to round, and then find the remainder,
causing the negative values.
is applied last, after other constraints such as name patterns. This
is useful first because the pg_foo_is_visible() functions are relatively
expensive, and second because it minimizes the prospects for race
conditions. The change is fragile though since it makes unwarranted
assumptions about planner behavior, ie, that WHERE clauses will be
executed in the original order if there's not reason to change it.
This should fix ... or at least hide ... an intermittent failure in the
prepared_xacts regression test, while we think about what else to do.
checked that the pointer is actually word-aligned. Casting a non-aligned
pointer to int32* is technically illegal per the C spec, and some recent
versions of gcc actually generate bad code for the memset() when given
such a pointer. Per report from Andrew Morrow.
port number, and use a default value for it that is dependent on the
configuration-time DEF_PGPORT. Should make the world safe for running
parallel 'make check' in different branches. Back-patch as far as 7.4
so that this actually is useful.
output targetlist of the Unique or HashAgg plan. This code was OK when
written, but subsequent changes to use "physical tlists" where possible
had broken it: given an input subplan that has extra variables added to
avoid a projection step, it would copy those extra variables into the
upper tlist, which is pointless since a projection has to happen anyway.
I have seen this case in CVS tip due to new "physical tlist" optimization
for subqueries. I believe it probably can't happen in existing releases,
but the check is not going to hurt anything, so backpatch to 8.0 just
in case.
cases: we can't just consider whether the subquery's output is unique on its
own terms, we have to check whether the set of output columns we are going to
use will be unique. Per complaint from Luca Pireddu and test case from
Michael Fuhr.
requiring superuserness always, allow an owner to reassign ownership
to any role he is a member of, if that role would have the right to
create a similar object. These three requirements essentially state
that the would-be alterer has enough privilege to DROP the existing
object and then re-CREATE it as the new role; so we might as well
let him do it in one step. The ALTER TABLESPACE case is a bit
squirrely, but the whole concept of non-superuser tablespace owners
is pretty dubious anyway. Stephen Frost, code review by Tom Lane.
I wrote:
> So either we code up some intelligence to put the "C" in the right
> position or we have to pass down "A B" and "D" separately from the
> main makefile.
The following patch might just do the former. Please try it out.
Peter E.
optional arguments as text input functions, ie, typioparam OID and
atttypmod. Make all the datatypes that use typmod enforce it the same
way in typreceive as they do in typinput. This fixes a problem with
failure to enforce length restrictions during COPY FROM BINARY.
return arays nicely without having to make the plperl programmer aware
of anything. The attached patch allows plperl to return an arrayref
where the function returns an array type. It silently calls a perl
function to stringify the array before passing it to the pg array
parser. Non-array returns are handled as before (i.e. passed through
this process) so it is backwards compatible. I will presently submit
regression tests and docs.
example:
andrew=# create or replace function blah() returns text[][] language
plperl as $$ return [['a"b','c,d'],['e\\f','g']]; $$;
CREATE FUNCTION
andrew=# select blah();
blah
-----------------------------
{{"a\"b","c,d"},{"e\\f",g}}
This would complete half of the TODO item:
. Pass arrays natively instead of as text between plperl and postgres
(The other half is translating pg array arguments to perl arrays - that
will have to wait for 8.1).
Some of this patch is adapted from a previously submitted patch from
Sergej Sergeev. Both he and Abhijit Menon-Sen have looked it over
briefly and tentatively said it looks ok.
Andrew Dunstan
for PL/Perl, to avoid loading the entire result set into memory as the
existing spi_exec_query() function does.
Here's how one might use the new functions:
$x = spi_query("select ...");
while (defined ($y = spi_fetchrow($x))) {
...
return_next(...);
}
The changes do not affect the spi_exec_query() interface in any way.
Abhijit Menon-Sen
The Problem: Occassionally a DBA needs to dump a database to a new
encoding. In instances where the current encoding, (or lack of an
encoding, like SQL_ASCII) is poorly supported on the target database
server, it can be useful to dump into a particular encoding. But,
currently the only way to set the encoding of a pg_dump file is to
change client_encoding in postgresql.conf and restart postmaster.
This is more than a little awkward for production systems.
Magnus Hagander
into pg_catalog rather than public, and supports dumping languages whose
handlers are found there. This will make it easier to drop the public
schema if desired.
Unlike the previous patch, the comments have been updated and I have
reformatted some code to meet Alvarro's request to stick to 80 cols. (I
actually aghree with this - it makes printing the code much nicer).
I think I did the right thing w.r.t versions earlier than 7.3, but I
have no real way of checking, so that should be checked by someone with
more/older knowledge than me ;-)
Andrew Dunstan
when a plpython function returns unicode" thread:
http://archives.postgresql.org/pgsql-bugs/2005-06/msg00105.php
In several places PL/Python was calling PyObject_Str() and then
PyString_AsString() without checking if the former had returned
NULL to indicate an error. PyString_AsString() doesn't expect a
NULL argument, so passing one causes a segmentation fault. This
patch adds checks for NULL and raises errors via PLy_elog(), which
prints details of the underlying Python exception. The patch also
adds regression tests for these checks. All tests pass on my
Solaris 9 box running HEAD and Python 2.4.1.
In one place the patch doesn't call PLy_elog() because that could
cause infinite recursion; see the comment I added. I'm not sure
how to test that particular case or whether it's even possible to
get an error there: the value that the code should check is the
Python exception type, so I wonder if a NULL value "shouldn't
happen." This patch converts NULL to "Unknown Exception" but I
wonder if an Assert() would be appropriate.
The patch is against HEAD but the same changes should be applied
to earlier versions because they have the same problem. The patch
might not apply cleanly against earlier versions -- will the committer
take care of little differences or should I submit different versions
of the patch?
Michael Fuhr
The specification of this function is as follows.
regexp_replace(source text, pattern text, replacement text, [flags
text])
returns text
Replace string that matches to regular expression in source text to
replacement text.
- pattern is regular expression pattern.
- replacement is replace string that can use '\1'-'\9', and '\&'.
'\1'-'\9': back reference to the n'th subexpression.
'\&' : entire matched string.
- flags can use the following values:
g: global (replace all)
i: ignore case
When the flags is not specified, case sensitive, replace the first
instance only.
Atsushi Ogawa
inspection of shared catalogs. This allows pg_dumpall to continue to
work with pre-8.1 servers that likely won't have a database named postgres.
Also, suppress output of SYSID options for users and groups, since server
no longer does anything with these except emit a rude message.
There is much more to be done to update pg_dumpall for the roles feature,
but this at least makes it usable again. Per gripe from Chris K-L.
XLOG_DBASE_DROP_OLD WAL records -- these records are no longer created in
current sources. Adjust numbering of XLOG_DBASE_CREATE and XLOG_DBASE_DROP
and bump the catversion. Patch from Gavin Sherry, adjusted by Neil Conway.
have adequate mechanisms for tracking the contents of databases and
tablespaces). This solves the longstanding problem that you can drop a
user who still owns objects and/or has access permissions.
Alvaro Herrera, with some kibitzing from Tom Lane.
plperl - the attached small patch remedies that omission, and adds a
small regression test for error and warning output - the new regression
input and expected output are in separate attached files.
Andrew Dunstan
problems:
---------------------------------------------------------------------------
Support cross compilation by compiling "zic" with a native compiler.
This relies on the output of zic being platform independent, but that is
currently the case.
could not be reached before, but now that there is a plpgsql validator
function, it can be. Check is needed to prevent core dump reported by
Satoshi Nagayasu. Besides, this gives a more specific and useful
error message for a fairly common novice error.
find myself typing a command and then wanting to get the syntax for it.
So I do a ctrl-a and add a \h: but psql does not recognize the command,
because I have stuff attached to it (e.g. "alter table foobar"), so I
have to scroll over and delete everything except the name of the command
itself. This patch gives \h three chances to match: if nothing matches
the complete string (current behavior), it tries to match the first two
words (e.g. "ALTER TABLE"). If that fails, it tries to match the first
word (e.g. "DELETE").
Greg Sabino Mullane
---------------------------------------------------------------------------
This patch allows the PL/Python module to do (SRF) functions.
The patch was taken from the CVS version.
I have modified the plpython.c file and have added a test sql script for
testing the functionality. It was actually the script that was in the
8.0.3 version but have since been removed.
In order to signal the end of a set, the called python function must
simply return plpy.EndOfSet and the set would be returned.
Gerrit van Dyk
The patch was taken from the CVS version.
I have modified the plpython.c file and have added a test sql script for
testing the functionality. It was actually the script that was in the
8.0.3 version but have since been removed.
In order to signal the end of a set, the called python function must
simply return plpy.EndOfSet and the set would be returned.
Gerrit van Dyk
The content of the patch is as follows:
(1)Create shortcut when subtext was not found.
(2)Stop using LEFT and RIGHT macro.
In LEFT and RIGHT macro, TEXTPOS is executed by the same content as
execution immediately before. The execution frequency of TEXTPOS can be
reduced by using text_substring instead of LEFT and RIGHT macro.
(3)Add appendStringInfoText, and use it instead of
appendStringInfoString.
There is an overhead of PG_TEXT_GET_STR when appendStringInfoString is
executed by text type. This can be reduced by appendStringInfoText.
(4)Reduce execution of TEXTDUP.
The effect of the patch that I measured is as follows:
- The Data for test was created by 'pgbench -i'.
- Test SQL:
select replace(aid, '9', 'A') from accounts;
- Test results: Linux(CPU: Pentium III, Compiler option: -O2)
original: 1.515s
patched: 1.250s
Atsushi Ogawa
chdir into PGDATA and subsequently use relative paths instead of absolute
paths to access all files under PGDATA. This seems to give a small
performance improvement, and it should make the system more robust
against naive DBAs doing things like moving a database directory that
has a live postmaster in it. Per recent discussion.
---------------------------------------------------------------------------
> A quick look shows that when you use --with-libraries=/foo/bar the
> generated link line for libraries says
>
> -L/foo/bar -lpq
>
> and it should probably be the other way around (as it is for the
> executables).
>
> So I suspect we need some makefile tuning.
You were correct. This patch fixes it.
Jim C. Nasby
able to do this before, but I had tried to make an exception for functions
with OUT parameters. Michael Fuhr found one problem with it already, and
I found another, which was it didn't work for strict functions with a
NULL input. While both of these could be worked around, the probability
that there are more gotchas seems high; I think prudence dictates just
reverting to the former behavior for now. Accordingly, remove the kluge
added to get_expr_result_type() for Michael's case.
> generated link line for libraries says
>
> -L/foo/bar -lpq
>
> and it should probably be the other way around (as it is for the
> executables).
>
> So I suspect we need some makefile tuning.
You were correct. This patch fixes it.
Jim C. Nasby
propagated inside an outer join. In particular, given
LEFT JOIN ON (A = B) WHERE A = constant, we cannot conclude that
B = constant at the top level (B might be null instead), but we
can nonetheless put a restriction B = constant into the quals for
B's relation, since no inner-side rows not meeting that condition
can contribute to the final result. Similarly, given
FULL JOIN USING (J) WHERE J = constant, we can't directly conclude
that either input J variable = constant, but it's OK to push such
quals into each input rel. Per recent gripe from Kim Bisgaard.
Along the way, remove 'valid_everywhere' flag from RestrictInfo,
as on closer analysis it was not being used for anything, and was
defined backwards anyway.
end of the block:
<<label>>
begin
...
end label;
Similarly for loops. This is per PL/SQL. Update the documentation and
add regression tests. Patch from Pavel Stehule, code review by Neil
Conway.
basic regression tests for GiST to the standard regression tests.
I took the opportunity to add an rtree-equivalent gist opclass for
circles; the contrib version only covered boxes and polygons, but
indexing circles is very handy for distance searches.
pgtypeslib: (1) we need to check the return value of sub_abs() (2) we
need to check the return value of 4 calls to digitbuf_alloc().
Per Coverity static analysis performed by EnterpriseDB.
non-NULL in this function, so there is no need to check for it (2) we
should check the return value of pgtypes_strdup(). Patch from Eric
Astor at EnterpriseDB, with slight cleanup by myself, per a report
from the Coverity tool.
or zero-filled; therefore zero-filling it via memset() is pointless.
(I think setting `errno' is probably a waste of cycles as well, but I
haven't changed that.)
malloc() succeeded but the second failed, the buffer allocated by the
first malloc() would be leaked. Fix this by allocating both buffers
via a single malloc(), as suggested by Tom.
Per Coverity static analysis performed by EnterpriseDB.
the difference between checkpoints forced due to WAL segment consumption
and checkpoints forced for other reasons (such as CREATE DATABASE). Avoid
generating 'checkpoints are occurring too frequently' messages when the
checkpoint wasn't caused by WAL segment consumption. Per gripe from
Chris K-L.
current time: provide a GetCurrentTimestamp() function that returns
current time in the form of a TimestampTz, instead of separate time_t
and microseconds fields. This is what all the callers really want
anyway, and it eliminates low-level dependencies on AbsoluteTime,
which is a deprecated datatype that will have to disappear eventually.
role memberships; make superuser/createrole distinction do something
useful; fix some locking and CommandCounterIncrement issues; prevent
creation of loops in the membership graph.
syntactic conflicts, both privilege and role GRANT/REVOKE commands have
to use the same production for scanning the list of tokens that might
eventually turn out to be privileges or role names. So, change the
existing GRANT/REVOKE code to expect a list of strings not pre-reduced
AclMode values. Fix a couple other minor issues while at it, such as
InitializeAcl function name conflicting with a Windows system function.
and pg_auth_members. There are still many loose ends to finish in this
patch (no documentation, no regression tests, no pg_dump support for
instance). But I'm going to commit it now anyway so that Alvaro can
make some progress on shared dependencies. The catalog changes should
be pretty much done.
- full concurrency for insert/update/select/vacuum:
- select and vacuum never locks more than one page simultaneously
- select (gettuple) hasn't any lock across it's calls
- insert never locks more than two page simultaneously:
- during search of leaf to insert it locks only one page
simultaneously
- while walk upward to the root it locked only parent (may be
non-direct parent) and child. One of them X-lock, another may
be S- or X-lock
- 'vacuum full' locks index
- improve gistgetmulti
- simplify XLOG records
Fix bug in index_beginscan_internal: LockRelation may clean
rd_aminfo structure, so move GET_REL_PROCEDURE after LockRelation
name matches the name of any parent-table constraint, without looking
at the constraint text. This is a not-very-bulletproof workaround for
the problem exhibited by Berend Tober last month. We really ought to
record constraint inheritance status in pg_constraint, but it's looking
like that may not get done for 8.1 --- and even if it does, we will
need this kluge for dumping from older servers.
with a table that has a small predicted size. Avoids wasting several
hundred K on the timezone hash table, which is likely to have only one
or a few entries, but the entries use up 10Kb apiece ...
with main, avoid using a SQL-defined SQLSTATE for what is most definitely
not a SQL-compatible error condition, fix documentation omissions,
adhere to message style guidelines, don't use two GUC_REPORT variables
when one is sufficient. Nothing done about pg_dump issues.
literally.
Add GUC variables:
"escape_string_warning" - warn about backslashes in non-E strings
"escape_string_syntax" - supports E'' syntax?
"standard_compliant_strings" - treats backslashes literally in ''
Update code to use E'' when escapes are used.
should fix the recent reports of "index is not a btree" failures,
as well as preventing a more obscure race condition involving changes
to a template database just after copying it with CREATE DATABASE.
to the existing X-direction tests. An rtree class now includes 4 actual
2-D tests, 4 1-D X-direction tests, and 4 1-D Y-direction tests.
This involved adding four new Y-direction test operators for each of
box and polygon; I followed the PostGIS project's lead as to the names
of these operators.
NON BACKWARDS COMPATIBLE CHANGE: the poly_overleft (&<) and poly_overright
(&>) operators now have semantics comparable to box_overleft and box_overright.
This is necessary to make r-tree indexes work correctly on polygons.
Also, I changed circle_left and circle_right to agree with box_left and
box_right --- formerly they allowed the boundaries to touch. This isn't
actually essential given the lack of any r-tree opclass for circles, but
it seems best to sync all the definitions while we are at it.
CURRENT_TIME, and LOCALTIME: now they just produce "timestamptz" not
"timestamptz(6)", etc. This makes the behavior more consistent with our
choice to not assign a specific default precision to column datatypes.
It should also save a few cycles at runtime due to not having to invoke
the round-to-given-precision functions.
I also took the opportunity to translate CURRENT_TIMESTAMP into "now()"
instead of an invocation of the timestamptz input converter --- this should
save a few cycles too.
polygon operators (<<, &<, >>, &>). Per ideas originally put forward
by andrew@supernews and later rediscovered by moi. This patch just
fixes the existing opclasses, and does not add any new behavior as I
proposed earlier; that can be sorted out later. In principle this
could be back-patched, since it changes only search behavior and not
system catalog entries nor rtree index contents. I'm not currently
planning to do that, though, since I think it could use more testing.
in the database. The old behavior (reindex system catalogs only) is now
available as REINDEX SYSTEM. I did not add the complementary REINDEX USER
case since there did not seem to be consensus for this, but it would be
trivial to add later. Per recent discussions.
argument list contains parameter symbols ($n) declared as type VOID,
discard these arguments. This allows the driver to avoid renumbering
mixed IN and OUT argument placeholders (the JDBC syntax involves writing
? for both IN and OUT parameters, but on the server side we don't think
that OUT parameters are arguments). This doesn't break any currently-
useful cases since VOID is not used as an input argument type.
we need to be careful to reset rc to PLPGSQL_RC_OK, depending on how
the loop's logic is structured. If we continue a loop but it then
exits without executing the loop's body again, we want to return
PLPGSQL_RC_OK to our caller. Enhance the regression tests to catch
this problem. Per report from Michael Fuhr.
(1) The code doesn't initialize `sum', so the initial "does the checksum
match?" test is wrong.
(2) The loop that is intended to check for a "null block" just checks
the first byte of the tar block 512 times, rather than each of the
512 bytes one time (!), which I'm guessing was the intent.
It was only through sheer luck that this worked in the first place.
Per Coverity static analysis performed by EnterpriseDB.
is redundant after a check has already been made for "num < 0". The "set"
variable can also be removed, as it is now no longer used. Per checking
with Karel, this is the right fix.
Per Coverity static analysis performed by EnterpriseDB.
using the recently added lo_create() function. The restore logic in
pg_restore is greatly simplified as well, since there's no need anymore
to try to adjust database references to match a new set of blob OIDs.
unlike template0 and template1 does not have any special status in
terms of backend functionality. However, all external utilities such
as createuser and createdb now connect to "postgres" instead of
template1, and the documentation is changed to encourage people to use
"postgres" instead of template1 as a play area. This should fix some
longstanding gotchas involving unexpected propagation of database
objects by createdb (when you used template1 without understanding
the implications), as well as ameliorating the problem that CREATE
DATABASE is unhappy if anyone else is connected to template1.
Patch by Dave Page, minor editing by Tom Lane. All per recent
pghackers discussions.
malformed ident map file. This was introduced by the linked list
rewrite in 8.0 -- mea maxima culpa.
Per Coverity static analysis performed by EnterpriseDB.
only used in one branch of an if statement, so we can move its
declaration to that block. This also avoids an unnecessary syscache
lookup.
Per Coverity static analysis performed by EnterpriseDB.
NULL (e.g. due to the preceding strlen()). Therefore we needn't recheck
this before initializing 'e_text'.
Per Coverity static analysis performed by EnterpriseDB.
(due to the preceding strlen(), for example), so we needn't recheck this
before invoking pg_mbcliplen().
Per Coverity static analysis performed by EnterpriseDB.
It never leaked memory before PG 8.0, so none of the callers are
expecting this. Cleanest fix seems to be to make it allocate the needed
memory in estate->eval_econtext, where it will be cleaned up by
the next exec_eval_cleanup. Per report from Bill Rugolsky.
*fail*, to test that plpython didn't allow untrusted operations.
When we changed plpython to plpythonu because python didn't actually have
a secure sandbox mode, someone (probably me :-() misinterpreted the tests
as checking whether Python's file I/O works. Which is a stupid thing for
us to be testing. Remove it so we don't clutter the filesystem with
random temporary files.
copying/converting the new value, which meant that it failed badly on
"var := var" if var is of pass-by-reference type. Fix this and a similar
hazard in exec_move_row(); not sure that the latter can manifest before
8.0, but patch it all the way back anyway. Per report from Dave Chapeskie.
(a/k/a SELECT INTO). Instead, flush and fsync the whole relation before
committing. We do still need the WAL log when PITR is active, however.
Simon Riggs and Tom Lane.
2. improve vacuum for gist
- use FSM
- full vacuum:
- reforms parent tuple if it's needed
( tuples was deleted on child page or parent tuple remains invalid
after crash recovery )
- truncate index file if possible
3. fixes bugs and mistakes
scankeys arrays that it needs can never have more than INDEX_MAX_KEYS
entries, so it's reasonable to just allocate them as fixed-size local
arrays, and save the cost of palloc/pfree. Not a huge savings, but
a cycle saved is a cycle earned ...
includes error checking and an appropriate ereport(ERROR) message.
This gets rid of rather tedious and error-prone manipulation of errno,
as well as a Windows-specific bug workaround, at more than a dozen
call sites. After an idea in a recent patch by Heikki Linnakangas.
given reasonably short lifespans for prepared transactions, this should
mean that only a small minority of state files ever need to be fsynced
at all. Per discussion with Heikki Linnakangas.
not memcpy() to copy the offered key into the hash table during HASH_ENTER.
This avoids possible core dump if the passed key is located very near the
end of memory. Per report from Stefan Kaltenbrunner.
old suggestion by Oliver Jowett. Also, add a transaction column to the
pg_locks view to show the xid of each transaction holding or awaiting
locks; this allows prepared transactions to be properly associated with
the locks they own. There was already a column named 'transaction',
and I chose to rename it to 'transactionid' --- since this column is
new in the current devel cycle there should be no backwards compatibility
issue to worry about.
work if either of the join relations are empty. The logic is:
(1) if the inner relation's startup cost is less than the outer
relation's startup cost and this is not an outer join, read
a single tuple from the inner relation via ExecHash()
- if NULL, we're done
(2) read a single tuple from the outer relation
- if NULL, we're done
(3) build the hash table on the inner relation
- if hash table is empty and this is not an outer join,
we're done
(4) otherwise, do hash join as usual
The implementation uses the new MultiExecProcNode API, per a
suggestion from Tom: invoking ExecHash() now produces the first
tuple from the Hash node's child node, whereas MultiExecHash()
builds the hash table.
I had to put in a bit of a kludge to get the row count returned
for EXPLAIN ANALYZE to be correct: since ExecHash() is invoked to
return a tuple, and then MultiExecHash() is invoked, we would
return one too many tuples to EXPLAIN ANALYZE. I hacked around
this by just manually detecting this situation and subtracting 1
from the EXPLAIN ANALYZE row count.
> against rc1. It simply checks with GetDatabaseEncoding() if the current
> database is in UTF-8, and if so, sets the UTF-8 flag on the arguments
> that are passed to perl. This means that it isn't necessary to
> utf8::upgrade() every string, as perl has no way of knowing offhand
> that a string is UTF-8 -- but postgres does, because the database
> encoding is specified, so it makes sense to turn the flag on. You
> should also be able to properly manipulate UTF-8 strings now from
> plperl as opposed to plperlu, because otherwise you'd have to use
> encoding 'utf8' which was not allowed. It could also eliminate some
> unexpected bugs if you assume that perl knows the string is unicode.
It
> is enabled only for perl 5.6 and higher, so earlier versions will not
> be affected.
>
> I have been assured by crab that the patch is quite harmless and will
> not break anything. It would be great to see it in 8 final! :-)
David Kamholz
"AT TIME ZONE", and not just the shorlist previously available. For
example:
SELECT CURRENT_TIMESTAMP AT TIME ZONE 'Europe/London';
works fine now. It will also obey whatever DST rules were in effect at
just that date, which the previous implementation did not.
It also supports the AT TIME ZONE on the timetz datatype. The whole
handling of DST is a bit bogus there, so I chose to make it use whatever
DST rules are in effect at the time of executig the query. not sure if
anybody is actuallyi *using* timetz though, it seems pretty
unpredictable just because of this...
Magnus Hagander
>> assuming this sideeffect is removed, though?
>
>I have no problem with the hashtable, only with preloading it with
>everything. What I'd like to see is that the table inherited at fork()
>contains just the data for the default timezone. (At least in the
>normal case where that setting hasn't been changed since postmaster
>start.)
Here's a patch doing this. Changes score_timezone not to use pg_tzset(),
and thus not loading all the zones in the cache. The actual timezone
being picked will be set using set_global_timezone() which in turn calls
pg_tzset() and loads it in the cache.
Magnus Hagander
it is sufficient to track whether a backend holds a lock or not, and
store information about transaction vs. session locks only in the
inside-the-backend LocalLockTable. Since there can now be but one
PROCLOCK per lock per backend, LockCountMyLocks() is no longer needed,
thus eliminating some O(N^2) behavior when a backend holds many locks.
Also simplify the LockAcquire/LockRelease API by passing just a
'sessionLock' boolean instead of a transaction ID. The previous API
was designed with the idea that per-transaction lock holding would be
important for subtransactions, but now that we have subtransactions we
know that this is unwanted. While at it, add an 'isTempObject' parameter
to LockAcquire to indicate whether the lock is being taken on a temp
table. This is not used just yet, but will be needed shortly for
two-phase commit.
part of service principal. If not set, any service principal matching
an entry in the keytab can be used.
NEW KERBEROS MATCHING BEHAVIOR FOR 8.1.
Todd Kover
if geqo_rand() returns exactly 1.0, resulting in failure due to indexing
off the end of the pool array. Also, since this is using inexact float math,
it seems wise to guard against roundoff error producing values slightly
outside the expected range. Per report from bug@zedware.org.
instead of just scalar variables. Add regression tests and update the
documentation. Along the way, remove some redundant error checking
code from exec_stmt_perform().
Original patch from Pavel Stehule, reworked by Neil Conway.
constraint while determining whether the index sort order matches the
query's ORDER BY. This for example allows an index on (x,y) to match
... WHERE x = 42 ORDER BY y;
It only works for btree indexes, but since those are the only ones we
currently have that are ordered at all, that's good enough for now.
Per popular demand.
nonconsecutive columns of a multicolumn index, as per discussion around
mid-May (pghackers thread "Best way to scan on-disk bitmaps"). This
turns out to require only minimal changes in btree, and so far as I can
see none at all in GiST. btcostestimate did need some work, but its
original assumption that index selectivity == heap selectivity was
quite bogus even before this.
mode to only affect the presentation of normal query results, not the
output of psql slash commands. Documentation updated. I also made
some unrelated minor psql cleanup. Per suggestion from Stuart Cooper.
a descriptor that uses the current transaction snapshot, rather than
SnapshotNow as it did before (and still does if INV_WRITE is set).
This means pg_dump will now dump a consistent snapshot of large object
contents, as it never could do before. Also, add a lo_create() function
that is similar to lo_creat() but allows the desired OID of the large
object to be specified. This will simplify pg_restore considerably
(but I'll fix that in a separate commit).
syntax for database connection parameters. It has been inside an
#ifdef NOT_USED block since 2001 or so and is marked as "broken", so
I don't think it is likely to be rehabilitated any time soon.
patch adds missing checks to the call sites of malloc(), strdup(),
PQmakeEmptyPGresult(), pqResultAlloc(), and pqResultStrdup(), and updates
the documentation. Per original report from Volkan Yazici about
PQmakeEmptyPGresult() not checking for malloc() failure.
These contain the SQLSTATE and error message of the current exception,
respectively. They are scope-local variables that are only defined
in exception handlers (so attempting to reference them outside an
exception handler is an error). Update the regression tests and the
documentation.
Also, do some minor related cleanup: export an unpack_sql_state()
function from the backend and use it to unpack a SQLSTATE into a
string, and add a free_var() function to pl_exec.c
Original patch from Pavel Stehule, review by Neil Conway.
history customizable through a variable named HISTFILE, analogous to
psql's already implemented HISTCONTROL and HISTSIZE variables, and
bash's HISTFILE-Variable.
The motivation was to be able to get psql to maintain separate
histories for separate databases. This is now easily achievable
through a line like the following in ~/.psqlrc:
\set HISTFILE ~/.psql_history-:DBNAME
Andreas Seltenreich
to a subquery if the outer query is simple enough that the LIMIT can
be reflected directly to the subquery. This didn't use to be very
interesting, because a subquery that couldn't have been flattened into
the upper query was usually not going to be very responsive to
tuple_fraction anyway. But with new code that allows UNION ALL subqueries
to pay attention to tuple_fraction, this is useful to do. In particular
this lets the optimization occur when the UNION ALL is directly inside
a view.
if the limit were directly applied to it. This does not actually
add a LIMIT plan node to the generated subqueries --- that would be
useless overhead --- but it does cause the planner to prefer fast-
start plans when the limit is small. After an idea from Phil Endecott.
this in turn causes CREATE TABLE AS in plpgsql to set ROW_COUNT.
This is how it behaved before 7.4; I had unintentionally changed the
behavior in a bit of sloppy micro-optimization.
pg_restore. It restores the given schemaname only. It can be used in
conjunction with the -t and other switches to make the selection very
fine grained.
Richard van den Bergg, CISSP
function that accepts a double precision argument assumed to be a Unix
epoch timestamp and returns timestamp with time zone, and accompanying
documentation.
Usage:
test=# select to_timestamp(200120400);
to_timestamp
------------------------
1976-05-05 14:00:00+09
(1 row)
Michael Glaesemann
psql. i.e. "\pset format troff-ms". The patch also corrects some
problems with the "latex" format, notably defining an extra column in
the output table, and correcting some alignment issues; it also
changes the output to match the border setting as documented in the
manual page and as shown with the "aligned" format.
The troff-ms output is mostly identical to the latex output allowing
for the differences between the two typesetters.
The output should be saved in a file and piped as follows:
cat file | tbl | troff -T ps -ms > file.ps
or
tbl file | troff -T ps -ms > file.ps
Because it contains tabs, you'll need to redirect psql output or use
"script", rather than pasting from a terminal window, due to the tabs
which can be replaced with spaces.
Roger Leigh
of a relation in a flat 'joininfo' list. The former arrangement grouped
the join clauses according to the set of unjoined relids used in each;
however, profiling on test cases involving lots of joins proves that
that data structure is a net loss. It takes more time to group the
join clauses together than is saved by avoiding duplicate tests later.
It doesn't help any that there are usually not more than one or two
clauses per group ...
as well as the existing pg_catalog entries for prefix and postfix %.
These have never been documented, though they did appear in one old
regression test. This avoids surprising behavior in cases like
"SELECT -25 % -10". Per recent discussion.
Note: although there is a catalog change here, I did not force initdb
since there's no harm in leaving the inaccessible entries in one's
copy of pg_operator.
transaction IDs, rather than like subtrans; in particular, the information
now survives a database restart. Per previous discussion, this is
essential for PITR log shipping and for 2PC.
last nextval() or setval() performed by the current session. Update the
docs, add regression tests, and bump the catalog version. Patch from
Dennis Björklund, various improvements by Neil Conway.
This allows the result of executing a SELECT to be assigned to a row
variable, record variable, or list of scalars. Docs and regression tests
updated. Per Pavel Stehule, improvements and cleanup by Neil Conway.
---------------------------------------------------------------------------
While playing around, I got the following error message:
--
FATAL: pre-existing shared memory block (key 5432001, ID 90898435) is
still in use
HINT: If you're sure there are no old server processes still running,
remove the shared memory block with the command "ipcrm", or just delete
the file "/home/hlinnaka/pgsql/data/postmaster.pid".
---
Thats normal because I used "kill -9 postmaster" to shut down.
The hint advises me to use "ipcrm", but there's the "ipcclean" script in
bin for just this purpose. The hint should probably advise to use
ipcclean.
The attached patch replaces all occurances of "ipcrm" with "ipcclean" in
src/backend/utils/init/miscinit.c and all the translations in
src/backend/po.
While reviewing the patch, I noticed a likely typo in hr.po. While I
don't
speak Croatian, the translation seems to advise to use the "icpm(1)"
command. I changed that to "ipcclean" too.
Heikki Linnakangas
up have the standard layout with unused space between pd_lower and pd_upper.
When this is set, XLogInsert will omit the unused space without bothering
to scan it to see if it's zero. That saves time in XLogInsert, and also
allows reversion of my earlier patch to make PageRepairFragmentation et al
explicitly re-zero freed space. Per suggestion by Heikki Linnakangas.
other_rel_list with a single array indexed by rangetable index.
This reduces find_base_rel from O(N) to O(1) without any real penalty.
While find_base_rel isn't one of the major bottlenecks in any profile
I've seen so far, it was starting to creep up on the radar screen
for complex queries --- so might as well fix it.
a new PlannerInfo struct, which is passed around instead of the bare
Query in all the planning code. This commit is essentially just a
code-beautification exercise, but it does open the door to making
larger changes to the planner data structures without having to muck
with the widely-known Query struct.
1. Rename spi_return_next to return_next.
2. Add a new test for return_next.
3. Update the expected output.
4. Update the documentation.
Abhijit Menon-Sen
representation as the jointree) with two lists of RTEs, one showing
the RTEs accessible by qualified names, and the other showing the RTEs
accessible by unqualified names. I think this is conceptually simpler
than what we did before, and it's sure a whole lot easier to search.
This seems to eliminate the parse-time bottleneck for deeply nested
JOIN structures that was exhibited by phil@vodafone.
---------------------------------------------------------------------------
Tom Lane <tgl@sss.pgh.pa.us> writes:
> a_ogawa <a_ogawa@hi-ho.ne.jp> writes:
> > It is a reasonable idea. However, the majority part of MemSet was not
> > able to be avoided by this idea. Because the per-tuple contexts are used
> > at the early stage of executor.
>
> Drat. Well, what about changing that? We could introduce additional
> contexts or change the startup behavior so that the ones that are
> frequently reset don't have any data in them unless you are working
> with pass-by-ref values inside the inner loop.
That might be possible. However, I think that we should change only
aset.c about this article.
I thought further: We can check whether context was used from the last
reset even when blocks list is not empty. Please see attached patch.
postgresql.conf.
---------------------------------------------------------------------------
Here's an updated version of the patch, with the following changes:
1) No longer uses "service name" as "application version". It's instead
hardcoded as "postgres". It could be argued that this part should be
backpatched to 8.0, but it doesn't make a big difference until you can
start changing it with GUC / connection parameters. This change only
affects kerberos 5, not 4.
2) Now downcases kerberos usernames when the client is running on win32.
3) Adds guc option for "krb_caseins_users" to make the server ignore
case mismatch which is required by some KDCs such as Active Directory.
Off by default, per discussion with Tom. This change only affects
kerberos 5, not 4.
4) Updated so it doesn't conflict with the rendevouz/bonjour patch
already in ;-)
Magnus Hagander
>
> > The second issue is where plperl returns a large result set.
I have attached the following seven patches to address this problem:
1. Trivial. Replaces some errant spaces with tabs.
2. Trivial. Fixes the spelling of Jan's name, and gets rid of many
inane, useless, annoying, and often misleading comments. Here's
a sample: "plperl_init_all() - Initialize all".
(I have tried to add some useful comments here and there, and will
continue to do so now and again.)
3. Trivial. Splits up some long lines.
4. Converts SRFs in PL/Perl to use a Tuplestore and SFRM_Materialize
to return the result set, based on the PL/PgSQL model.
There are two major consequences: result sets will spill to disk when
they can no longer fit in work_mem; and "select foo_srf()" no longer
works. (I didn't lose sleep over the latter, since that form is not
valid in PL/PgSQL, and it's not documented in PL/Perl.)
5. Trivial, but important. Fixes use of "undef" instead of undef. This
would cause empty functions to fail in bizarre ways. I suspect that
there's still another (old) bug here. I'll investigate further.
6. Moves the majority of (4) out into a new plperl_return_next()
function, to make it possible to expose the functionality to
Perl; cleans up some of the code besides.
7. Add an spi_return_next function for use in Perl code.
If you want to apply the patches and try them out, 8-composite.diff is
what you should use. (Note: my patches depend upon Andrew's use-strict
and %_SHARED patches being applied.)
Here's something to try:
create or replace function foo() returns setof record as $$
$i = 0;
for ("World", "PostgreSQL", "PL/Perl") {
spi_return_next({f1=>++$i, f2=>'Hello', f3=>$_});
}
return;
$$ language plperl;
select * from foo() as (f1 integer, f2 text, f3 text);
(Many thanks to Andrews Dunstan and Supernews for their help.)
Abhijit Menon-Sen
> a_ogawa <a_ogawa@hi-ho.ne.jp> writes:
> > It is a reasonable idea. However, the majority part of MemSet was not
> > able to be avoided by this idea. Because the per-tuple contexts are used
> > at the early stage of executor.
>
> Drat. Well, what about changing that? We could introduce additional
> contexts or change the startup behavior so that the ones that are
> frequently reset don't have any data in them unless you are working
> with pass-by-ref values inside the inner loop.
That might be possible. However, I think that we should change only
aset.c about this article.
I thought further: We can check whether context was used from the last
reset even when blocks list is not empty. Please see attached patch.
The effect of the patch that I measured is as follows:
o Execution time that executed the SQL ten times.
(1)Linux(CPU: Pentium III, Compiler option: -O2)
- original: 24.960s
- patched : 23.114s
(2)Linux(CPU: Pentium 4, Compiler option: -O2)
- original: 8.730s
- patched : 7.962s
(3)Solaris(CPU: Ultra SPARC III, Compiler option: -O2)
- original: 37.0s
- patched : 33.7s
Atsushi Ogawa (a_ogawa)
RTE of interest, rather than the whole rangetable list. This makes
the API more understandable and avoids duplicate RTE lookups. This
patch reverts no-longer-needed portions of my patch of 2004-08-19.
performance problem pointed out by phil@vodafone: to wit, we were
spending O(N^2) time to check dropped-ness in an N-deep join tree,
even in the case where the tree was freshly constructed and couldn't
possibly mention any dropped columns. Instead of recursing in
get_rte_attribute_is_dropped(), change the data structure definition:
the joinaliasvars list of a JOIN RTE must have a NULL Const instead
of a Var at any position that references a now-dropped column. This
costs nothing during normal parse-rewrite-plan path, and instead we
have a linear-time update to make when loading a stored rule that
might contain now-dropped columns. While at it, move the responsibility
for acquring locks on relations referenced by rules into this separate
function (which I therefore chose to call AcquireRewriteLocks).
This saves effort --- namely, duplicated lock grabs in parser and rewriter
--- in the normal path at a cost of one extra non-locked heap_open()
in the stored-rule path; seems a good tradeoff. A fringe benefit is
that it is now *much* clearer that we acquire lock on relations referenced
in rules before we make any rewriter decisions based on their properties.
(I don't know of any bug of that ilk, but it wasn't exactly clear before.)
to just around the bare recv() call that gets a command from the client.
The former placement in PostgresMain was unsafe because the intermediate
processing layers (especially SSL) use facilities such as malloc that are
not necessarily re-entrant. Per report from counterstorm.com.
Instead of a separate CRC on each backup block, include backup blocks
in their parent WAL record's CRC; this is important to ensure that the
backup block really goes with the WAL record, ie there was not a page
tear right at the start of the backup block. Implement a simple form
of compression of backup blocks: drop any run of zeroes starting at
pd_lower, so as not to store the unused 'hole' that commonly exists in
PG heap and index pages. Tweak PageRepairFragmentation and related
routines to ensure they keep the unused space zeroed, so that the above
compression method remains effective. All per recent discussions.
and RelationNameGetTupleDesc() as deprecated; remove uses of the
latter in the contrib library. Along the way, clean up crosstab()
code and documentation a little.
conventions of only allowing octal, like \045. Remove support for
\decimal, \0octal, and \0xhex which matches the strtol() function but
didn't make sense with backslashes.
These now return the same character:
test=> \set x '\54'
test=> \echo :x
,
test=> \set x '\054'
test=> \echo :x
,
THIS IS A BACKWARD COMPATIBILITY CHANGE.
key, compare the new and old row versions. If the foreign key column has
not changed, we needn't enqueue the trigger, since the update cannot
violate the foreign key. This optimization was previously applied in the
RI trigger function, but it is more efficient to avoid firing the trigger
altogether. Per recent discussion on pgsql-hackers.
Also add a regression test for some unintuitive foreign key behavior, and
refactor some code that deals with the OIDs of the various RI trigger
functions.
keys, rather than a single trigger for both events. This should not change
functionality, but it is more consistent: previously, there were trigger
functions for both "check_insert" and "check_update", but the former was
used for both events.
Bump catalog version number (not strictly necessary, but best to be
cautious).
would be evaluated only once anyway (ie, it's just a SELECT with no
FROM or an INSERT ... VALUES). The planner can't do it any faster than
the executor, so no point in an extra copying of the expression tree.
pg_class_aclmask(). We only need to do this when we have to check
pg_shadow.usecatupd, and that's not relevant unless the target table
is a system catalog. So we can usually avoid one syscache lookup.
are now reported via elog, eliminating the need to test the result code
at most call sites. Make it possible for the caller to distinguish a
freshly acquired lock from one already held in the current transaction.
Use that capability to avoid redundant AcceptInvalidationMessages() calls
in LockRelation().
status of the most recently queried userid. Since the common pattern is
many successive queries about the same user (ie, the current user) this
can save a lot of syscache probes.
were pretty expensive and I believe the case they were put in to
defend against can no longer arise, now that we have dependency checks
to prevent deletion of a type entry that is still referenced. Certainly
the example given in the CVS log entry can't happen anymore.
Since this was the only use of typeidIsValid(), remove the routine too.
to columns of an RTE that was a function returning RECORD with a column
definition list. Apparently no one has tried to use non-default typmod
with a function returning RECORD before.
spotted by Qingqing Zhou. The HASH_ENTER action now automatically
fails with elog(ERROR) on out-of-memory --- which incidentally lets
us eliminate duplicate error checks in quite a bunch of places. If
you really need the old return-NULL-on-out-of-memory behavior, you
can ask for HASH_ENTER_NULL. But there is now an Assert in that path
checking that you aren't hoping to get that behavior in a palloc-based
hash table.
Along the way, remove the old HASH_FIND_SAVE/HASH_REMOVE_SAVED actions,
which were not being used anywhere anymore, and were surely too ugly
and unsafe to want to see revived again.
hash table. This is a pretty unlikely scenario, since the table
should be tiny, but we can't guarantee continued correct operation
if it does occur. Spotted by Qingqing Zhou.
from a RECORD Const node, because that's what it may be faced with
after constant-folding of a function returning RECORD. Per example
from Michael Fuhr.
routines in the index's relcache entry, instead of doing a fresh fmgr_info
on every index access. We were already doing this for the index's opclass
support functions; not sure why we didn't think to do it for the AM
functions too. This supersedes the former method of caching (only)
amgettuple in indexscan scan descriptors; it's an improvement because the
function lookup can be amortized across multiple statements instead of
being repeated for each statement. Even though lookup for builtin
functions is pretty cheap, this seems to drop a percent or two off some
simple benchmarks.
Display only 9 not 10 digits of precision for timestamp values when
using non-integer timestamps. This prevents the display of rounding
errors for common values like days < 32.
working buffer into ParseDateTime() and reject too-long input there,
rather than checking the length of the input string before calling
ParseDateTime(). The old method was bogus because ParseDateTime() can use
a variable amount of working space, depending on the content of the
input string (e.g. how many fields need to be NUL terminated). This fixes
a minor stack overrun -- I don't _think_ it's exploitable, although I
won't claim to be an expert.
Along the way, fix a bug reported by Mark Dilger: the working buffer
allocated by interval_in() was too short, which resulted in rejecting
some perfectly valid interval input values. I added a regression test for
this fix.
scanner anyway) to avoid having any backup states. According to the
flex manual, this should speed things up, and indeed the backend scanner
is about a third faster according to some quick profiling checks.
I haven't tried to measure the speed change in psql, but it probably
is similar.
using pg_mblen. Therefore, pg_mblen is executed many times, and it
becomes a bottleneck.
This patch makes a short cut, and reduces execution frequency of
pg_mblen by comparing the first byte first.
a_ogawa
about adding an errant "TO" when we already have a TO. Since
TO cannot be a valid column name (we must quote it), we can
simply ignore the tab-completion if the previous word
was a "TO".
Greg Sabino Mullane
where there was also a WHERE-clause restriction that applied to the
join. The check on restrictlist == NIL is really unnecessary anyway,
because select_mergejoin_clauses already checked for and complained
about any unmergejoinable join clauses. So just take it out.
if they are two-byte multibyte characters. Same thing can be happen
if octet_length(multibyte_chars) == n where n is char(n).
Long standing bug since 7.3 days. Per report and fix from Yoshiyuki Asaba.
that we acquire a lock on relations added to the query due to inheritance.
Formerly, no such lock was held throughout planning, which meant that
a schema change could occur to invalidate the plan before it's even
been completed.
aren't doing anything useful (ie, neither selection nor projection).
Also, extend to SubqueryScan the hacks already in place to avoid
unnecessary ExecProject calls when the result would just be the same
tuple the subquery already delivered. This saves some overhead in
UNION and other set operations, as well as avoiding overhead for
unflatten-able subqueries. Per example from Sokolov Yura.
from Abhijit Menon-Sen, minor editorialization from Neil Conway. Also,
improve md5(text) to allocate a constant-sized buffer on the stack
rather than via palloc.
Catalog version bumped.
Also, remove the rather useless return value of LockReleaseAll. Change
response to detection of corruption in the shared lock tables to PANIC,
since that is the only way of cleaning up fully.
Originally an idea of Heikki Linnakangas, variously hacked on by
Alvaro Herrera and Tom Lane.
communication structure, and make it its own module with its own lock.
This should reduce contention at least a little, and it definitely makes
the code seem cleaner. Per my recent proposal.
* Made DELETE into "DELETE FROM"
* Moved ANALZYE to the end of the list to ease EXPLAIN / VACUUM
conflicts
* Removed the ANALYZE xx semicolon completion: we don't do that anywhere
else
* Add DECLARE support
* Add parens for DROP AGGREGATE
* Add "CASCADE | RESTRICT" for DROP xx
* Make EXPLAIN <tab> a lot smarter
* GROUP "BY" and ORDER "BY"
* "ISOLATION" becomes "ISOLATION LEVEL"
* Fix error in which REVOKE xx ON yy was receiving "TO", now gets "FROM"
* Add GRANT/REVOKE xx ON yy TO/FROM choices: usernames, GROUP, PUBLIC
* PREPARE xx <tab> AS "SELECT | INSERT | UPDATE | DELETE"
* Add = at end of UPDATE xx SET yy
* Beef up VACUUM stuff
for testing PLs and contrib_regression for testing contrib, instead of
overwriting the core system's regression database as formerly done.
Andrew Dunstan
external projects, we should be careful about what parts of the GiST
API are considered implementation details, and which are part of the
public API. Therefore, I've moved internal-only declarations into
gist_private.h -- future backward-incompatible changes to gist.h should
be made with care, to avoid needlessly breaking external GiST extensions.
Also did some related header cleanup: remove some unnecessary #includes
from gist.h, and remove some unused definitions: isAttByVal(), _gistdump(),
and GISTNStrategies.
- make sure we always invoke user-supplied GiST methods in a short-lived
memory context. This means the backend isn't exposed to any memory leaks
that be in those methods (in fact, it is probably a net loss for most
GiST methods to bother manually freeing memory now). This also means
we can do away with a lot of ugly manual memory management in the
GiST code itself.
- keep the current page of a GiST index scan pinned, rather than doing a
ReadBuffer() for each tuple produced by the scan. Since ReadBuffer() is
expensive, this is a perf. win
- implement dead tuple killing for GiST indexes (which is easy to do, now
that we keep a pin on the current scan page). Now all the builtin indexes
implement dead tuple killing.
- cleanup a lot of ugly code in GiST
than one heap page represented in the bitmap. This is a bit ugly but
it cuts overhead fairly effectively in simple join cases. Per example
from Sergey Koposov.
in an inconsistent state. (This is only latent because in reality
ExecSeqRestrPos is dead code at the moment ... but someday maybe it won't
be.) Add some comments about what the API for plan node mark/restore
actually is, because it's not immediately obvious.
when the blocks list is empty (there can surely be no freelist items if
the context contains no memory), and use MemSetAligned not MemSet to
clear the headers (we assume alignof(pointer) >= alignof(int32)).
Per discussion with Atsushi Ogawa. He proposes some further hacking
that I'm not yet sold on, but these two changes are unconditional wins
since there is no case in which they make things slower.
When one side of the join has a NULL, we don't want to uselessly try
to match it against every remaining tuple of the other side. While
at it, rewrite the comparison machinery to avoid multiple evaluations
of the left and right input expressions and to use a btree comparator
where available, instead of double operator calls. Also revise the
state machine to eliminate redundant comparisons and hopefully make it
more readable too.
AtCommit_Portals is restarted when a portal is deleted. This is
necessary since the deletion of a portal may cause the deletion of
another which on rare occations may cause the iterator to return a
deleted portal an thus a renewed attempt delete.
Thomas Hallgren
methods: they all invoke UpdateStats() since they have computed the
number of heap tuples, so I created a function in catalog/index.c that
each AM now calls.
collector messages, per recent discussion on pgsql-patches. This
actually required quite a few changes -- for example,
"databaseid != InvalidOid" was used to check whether a slot in the
backend entry table was initialized, but that no longer works since
the slot might be initialized prior to receiving the BESTART message
which contains the database id. We now use procpid > 0 to indicate
that a slot is non-empty.
Other changes:
- various comment improvements and cleanups
- there's no need to zero-out the entire activity buffer in
pgstat_add_backend(), we can just set activity[0] to '\0'.
- remove the counting of the # of connections to a database; this
was not used anywhere
One change in behavior I wasn't sure about: previously, the code
would create a hash table entry for a database as soon as any message
was received whose header referenced that database. Now, we only
create hash table entries as needed (so for example BESTART won't
create a database hash table entry, since it doesn't need to
access anything in the per-db hash table). It would be easy enough
to retain the old behavior, but AFAICS it is not required.
memset() or MemSet() to a char *. For one, memset()'s first argument is
a void *, and further void * can be implicitly coerced to/from any other
pointer type.
* Add session start time to pg_stat_activity
* Add the client IP address and port to pg_stat_activity
Original patch from Magnus Hagander, code review by Neil Conway. Catalog
version bumped. This patch sends the client IP address and port number in
every statistics message; that's not ideal, but will be fixed up shortly.
and VACUUM: in the interval between adding a new page to the relation
and formatting it, it was possible for VACUUM to come along and decide
it should format the page too. Though not harmful in itself, this would
cause data loss if a third transaction were able to insert tuples into
the vacuumed page before the original extender got control back.
before we check commit/abort status. Formerly this was done in some paths
but not all, with the result that a transaction might be considered
committed for some purposes before it became committed for others.
Per example found by Jan Wieck.
which is neither needed by nor related to that header. Remove the bogus
inclusion and instead include the header in those C files that actually
need it. Also fix unnecessary inclusions and bad inclusion order in
tsearch2 files.
associated with a hashtable is allocated in that hashtable's private
context, so that hash_destroy only has to destroy the context and not
do any retail pfree's; and tighten the inner loop of hash_seq_search.
startup to end, rather than re-opening it in each MultiExecBitmapIndexScan
call. I had foolishly thought that opening/closing wouldn't be much
more expensive than a rescan call, but that was sheer brain fade.
This seems to fix about half of the performance lossage reported by
Sergey Koposov. I'm still not sure where the other half went.
moment this has no particular use except to allow table rows to be
passed to record_out(), but that case seems to be useful in itself
per recent example from Elein. Further down the road we could look
at letting PL functions be declared to accept RECORD parameters.
output area as INTERNAL not CSTRING. This is to prevent people from
calling the functions by hand. This is a permanent solution for the
back branches but I hope it is just a stopgap for HEAD.
that return INTERNAL without also having INTERNAL arguments. Since the
functions in question aren't meant to be called by hand anyway, I just
redeclared them to take 'internal' instead of 'text'. Also add code
to ProcedureCreate() to enforce the restriction, as I should have done
to start with :-(
to produce when running the executor. This is consistent with the internal
executor APIs (such as ExecutorRun), which also use a long for this purpose.
It also allows FETCH_ALL to be passed -- since FETCH_ALL is defined as
LONG_MAX, this wouldn't have worked on platforms where int and long are of
different sizes. Per report from Tzahi Fadida.
only one argument. (Per recent discussion, the option to accept multiple
arguments is pretty useless for user-defined types, and would be a likely
source of security holes if it was used.) Simplify call sites of
output/send functions to not bother passing more than one argument.
argument, since that's all they are using now. Adjust type_sanity
regression test so that it will complain if anyone tries to define
multiple-argument output functions in future.
record object itself, rather than relying on a second OID argument to be
correct. This patch just changes the function behavior and not the
catalogs, so it's OK to back-patch to 8.0. Will remove the now-redundant
second argument in pg_proc in a separate patch in HEAD only.
is contention for a tuple-level lock. This solves the problem of a
would-be exclusive locker being starved out by an indefinite succession
of share-lockers. Per recent discussion with Alvaro.
a warning when a variable is used as a format string for printf()
and similar functions (if the variable is derived from untrusted
data, it could include unexpected formatting sequences). This
emits too many warnings to be enabled by default, but it does
flag a few dubious constructs in the Postgres tree. This patch
fixes up the obvious variants: functions that are passed a variable
format string but no additional arguments.
Most of these are harmless (e.g. the ruleutils stuff), but there
is at least one actual bug here: if you create a trigger named
"%sfoo", pg_dump will read uninitialized memory and fail to dump
the trigger correctly.
Essentially, we shoehorn in a lockable-object-type field by taking
a byte away from the lockmethodid, which can surely fit in one byte
instead of two. This allows less artificial definitions of all the
other fields of LOCKTAG; we can get rid of the special pg_xactlock
pseudo-relation, and also support locks on individual tuples and
general database objects (including shared objects). None of those
possibilities are actually exploited just yet, however.
I removed pg_xactlock from pg_class, but did not force initdb for
that change. At this point, relkind 's' (SPECIAL) is unused and
could be removed entirely.
to eliminate unnecessary deadlocks. This commit adds SELECT ... FOR SHARE
paralleling SELECT ... FOR UPDATE. The implementation uses a new SLRU
data structure (managed much like pg_subtrans) to represent multiple-
transaction-ID sets. When more than one transaction is holding a shared
lock on a particular row, we create a MultiXactId representing that set
of transactions and store its ID in the row's XMAX. This scheme allows
an effectively unlimited number of row locks, just as we did before,
while not costing any extra overhead except when a shared lock actually
has to be shared. Still TODO: use the regular lock manager to control
the grant order when multiple backends are waiting for a row lock.
Alvaro Herrera and Tom Lane.
or bitmap), use pred_test to be a little smarter about cases where a
filter clause is logically unnecessary. This may be overkill for the
plain indexscan case, but it's definitely useful for OR'd bitmap scans.
node, as this behavior is now better done as a bitmap OR indexscan.
This allows considerable simplification in nodeIndexscan.c itself as
well as several planner modules concerned with indexscan plan generation.
Also we can improve the sharing of code between regular and bitmap
indexscans, since they are now working with nigh-identical Plan nodes.
but just to open and close it during MultiExecBitmapIndexScan. This
avoids acquiring duplicate resources (eg, multiple locks on the same
relation) in a tree with many bitmap scans. Also, don't bother to
lock the parent heap at all here, since we must be underneath a
BitmapHeapScan node that will be holding a suitable lock.
of timetz values misbehaved in --enable-integer-datetime cases, and
EXTRACT(EPOCH) subtracted the zone instead of adding it in all cases.
Backpatch to all supported releases (except --enable-integer-datetime code
does not exist in 7.2).
As I pointed out a few days ago, this code has failed to do anything useful
for some time ... and if we did want to revive the capability to select
functions by nearness of inheritance ancestry, this is the wrong place
and way to do it anyway. The knowledge would need to go into
func_select_candidate() instead. Perhaps someday someone will be motivated
to do that, but I am not today.
ExprContexts will be freed anyway when FreeExecutorState() is reached,
and letting that routine do the work is more efficient because it will
automatically free the ExprContexts in reverse creation order. The
existing coding was effectively freeing them in exactly the worst
possible order, resulting in O(N^2) behavior inside list_delete_ptr,
which becomes highly visible in cases with a few thousand plan nodes.
ExecFreeExprContext is now effectively a no-op and could be removed,
but I left it in place in case we ever want to put it back to use.
c_expr. Perhaps the restriction was once needed to avoid bison errors,
but it seems to work just fine now --- and even generates a slightly
smaller state machine. This change allows examples like
SELECT '13:45'::timetz AT TIME ZONE '-07:00'::interval;
to work without parentheses around the right-hand input.
code in prepqual.c had a small drawback: the flatten_andors code was
able to cope with deeply nested AND/OR structures (like 10000 ORs in
a row), whereas eval_const_expressions tends to recurse until it
overruns the stack. Revise eval_const_expressions so that it doesn't
choke on deeply nested ANDs or ORs.
make some estimate of which available indexes to AND together, rather
than blindly taking 'em all. This could probably stand further
improvement, but it seems to do OK in simple tests.
but the code is basically working. Along the way, rewrite the entire
approach to processing OR index conditions, and make it work in join
cases for the first time ever. orindxpath.c is now basically obsolete,
but I left it in for the time being to allow easy comparison testing
against the old implementation.
logic operations during planning. Seems cleaner to create two new Path
node types, instead --- this avoids duplication of cost-estimation code.
Also, create an enable_bitmapscan GUC parameter to control use of bitmap
plans.
scans, using in-memory tuple ID bitmaps as the intermediary. The planner
frontend (path creation and cost estimation) is not there yet, so none
of this code can be executed. I have tested it using some hacked planner
code that is far too ugly to see the light of day, however. Committing
now so that the bulk of the infrastructure changes go in before the tree
drifts under me.
* Changes the APIs to the timezone functions to take a pg_tz pointer as
an argument, representing the timezone to use for the selected
operation.
* Adds a global_timezone variable that represents the current timezone
in the backend as set by SET TIMEZONE (or guc, or env, etc).
* Implements a hash-table cache of loaded tables, so we don't have to
read and parse the TZ file everytime we change a timezone. While not
necesasry now (we don't change timezones very often), I beleive this
will be necessary (or at least good) when "multiple timezones in the
same query" is eventually implemented. And code-wise, this was the time
to do it.
There are no user-visible changes at this time. Implementing the
"multiple zones in one query" is a later step...
This also gets rid of some of the cruft needed to "back out a timezone
change", since we previously couldn't check a timezone unless it was
activated first.
Passes regression tests on win32, linux (slackware 10) and solaris x86.
Magnus Hagander
return just a single tuple at a time. Currently the only such node
type is Hash, but I expect we will soon have indexscans that can return
tuple bitmaps. A side benefit is that EXPLAIN ANALYZE now shows the
correct tuple count for a Hash node.
critical and noncritical contexts (an example of noncritical being
post-checkpoint removal of dead xlog segments). In the critical cases
the CRIT_SECTION mechanism will cause ERROR to be promoted to PANIC
anyway, and in the noncritical cases we shouldn't let an error take
down the entire database. Arguably there should be *no* explicit
PANIC errors in this module, only more START/END_CRIT_SECTION calls,
but I didn't go that far. (Yet.)
when recycling a large number of xlog segments during checkpoint.
The former behavior searched from the same start point each time,
requiring O(checkpoint_segments^2) stat() calls to relocate all the
segments. Instead keep track of where we stopped last time through.
which induced bug #1597 in addition to having several other misbehaviors
(like labeling the dump with a completion time having nothing to do with
reality). Instead just print out the desired strings where RestoreArchive
was already emitting the 'PostgreSQL database dump' and
'PostgreSQL database dump complete' strings.
assuming comparison of atttypid is sufficient. In a dropped column
atttypid will be 0, and we'd better check the physical-storage data
to make sure the tupdescs are physically compatible.
I do not believe there is a real risk before 8.0, since before that
we only used this routine to compare successive states of the tupdesc
for a particular relation. But 8.0's typcache.c might be comparing
arbitrary tupdescs so we'd better play it safer.
whose keys are OIDs. The only one that looks particularly performance
critical is the relcache hashtable, but as long as we've got the function
we may as well use it wherever it's applicable.
indexes. Replace all heap_openr and index_openr calls by heap_open
and index_open. Remove runtime lookups of catalog OID numbers in
various places. Remove relcache's support for looking up system
catalogs by name. Bulky but mostly very boring patch ...
indexes. Extend the macros in include/catalog/*.h to carry the info
about hand-assigned OIDs, and adjust the genbki script and bootstrap
code to make the relations actually get those OIDs. Remove the small
number of RelOid_pg_foo macros that we had in favor of a complete
set named like the catname.h and indexing.h macros. Next phase will
get rid of internal use of names for looking up catalogs and indexes;
but this completes the changes forcing an initdb, so it looks like a
good place to commit.
Along the way, I made the shared relations (pg_database etc) not be
'bootstrap' relations any more, so as to reduce the number of hardwired
entries and simplify changing those relations in future. I'm not
sure whether they ever really needed to be handled as bootstrap
relations, but it seems to work fine to not do so now.
avoid encroaching on the 'user' range of OIDs by allowing automatic
OID assignment to use values below 16k until we reach normal operation.
initdb not forced since this doesn't make any incompatible change;
however a lot of stuff will have different OIDs after your next initdb.
of just a relation OID, thereby not having to open the relation for itself.
This actually saves code rather than adding it for most of the existing
callers, which had the rel open already. The main point though is to be
able to use this rather than plain addRangeTableEntry in setTargetTable,
thus saving one relation_openrv/relation_close cycle for every INSERT,
UPDATE, or DELETE. Seems to provide a several percent win on simple
INSERTs.
genbki.sh's pool (10000-16383) instead of being run-time assigned by
heap_insert. Might as well use the pool as long as it's there ...
I was a bit bemused to realize that it hadn't been in use at all since 7.2.
initdb not forced since this doesn't really affect anything. The OIDs
of casts and system indexes will change next time you do one, though.
and PL languages during initdb. The default permissions for these objects
are the same as what we were assigning anyway, so there is no need to
expend space in the catalogs on them. The space cost is particularly
significant in pg_proc's indexes, which are bloated by about a factor of 2
by the full-table update, and can never really recover the space.
initdb not forced, since the change has no actual impact on behavior.
be supported for all datatypes. Add CREATE AGGREGATE and pg_dump support
too. Add specialized min/max aggregates for bpchar, instead of depending
on text's min/max, because otherwise the possible use of bpchar indexes
cannot be recognized.
initdb forced because of catalog changes.
into indexscans on matching indexes. For the moment, it only handles
int4 and text datatypes; next step is to add a column to pg_aggregate
so that all MIN/MAX aggregates can be handled. Per my recent proposal.
deferred triggers: either one can create more work for the other,
so we have to loop till it's all gone. Per example from andrew@supernews.
Add a regression test to help spot trouble in this area in future.
while completing execution of the cursor's query. Otherwise we get wrong
answers or even crashes from non-volatile functions called by the query.
Per report from andrew@supernews.
decides whether to use hashed grouping instead of sort-plus-uniq
grouping. The function needs an annoyingly large number of parameters,
but this still seems like a win for legibility, since it removes over
a hundred lines from grouping_planner (which is still too big :-().
the long-term plan for this behavior for quite some time, but it is only
possible now that DELETE has a USING clause so that the user can join
other tables in a DELETE statement without relying on this behavior.
output parameters or VOID or a set. There seems no particular reason to
insist on a RETURN in these cases, since the function return value is
determined by other elements anyway. Per recent discussion.
in UPDATE. We also now issue a NOTICE if a query has _any_ implicit
range table entries -- in the past, we would only warn about implicit
RTEs in SELECTs with at least one explicit RTE.
As a result of the warning change, 25 of the regression tests had to
be updated. I also took the opportunity to remove some bogus whitespace
differences between some of the float4 and float8 variants. I believe
I have correctly updated all the platform-specific variants, but let
me know if that's not the case.
Original patch for DELETE ... USING from Euler Taveira de Oliveira,
reworked by Neil Conway.
functions. This patch optimizes int2_sum(), int4_sum(), float4_accum()
and float8_accum() to avoid needing to copy the transition function's
state for each input tuple of the aggregate. In an extreme case
(e.g. SELECT sum(int2_col) FROM table where table has a single column),
it improves performance by about 20%. For more complex queries or tables
with wider rows, the relative performance improvement will not be as
significant.
ExecProcNode() with a NULL value, so the test couldn't do anything
for us except maybe mask bugs. Removing it probably doesn't save
anything much either, but then again this is a hot-spot routine.
few palloc's. I also chose to eliminate the restype and restypmod fields
entirely, since they are redundant with information stored in the node's
contained expression; re-examining the expression at need seems simpler
and more reliable than trying to keep restype/restypmod up to date.
initdb forced due to change in contents of stored rules.
required for us to pull it into the main website. Same kind of fixes as
last time, just make sure things aren't violating the HTML standard. No
context changes at all.
Magnus Hagander
OPENed on non-SELECT commands such as EXPLAIN or SHOW (anything that
returns tuples is allowed). This flexibility already existed for
bound cursors, but OPEN was artificially restricting what it would
take. Per a gripe some months back.
performance hack Tom introduced recently. This means we can avoid
copying the transition array for each input tuple if these functions
are invoked as aggregate transition functions.
To test the performance improvement, I created a 1 million row table
with a single int4 column. Without the patch, SELECT avg(col) FROM
table took about 4.2 seconds (after the data was cached); with the
patch, it took about 3.2 seconds. Naturally, the performance
improvement for a less trivial query (or a table with wider rows)
would be relatively smaller.
not the brand of vodka. Complete FETCH <sth> <sth> with FROM and IN, not
FROM and TO (which is still pretty incomplete, but at least its the right
syntax).
cases with binary-compatible relabeling. My first try was implicitly
assuming that all operators scalarineqsel is used for have binary-
compatible datatypes on both sides ... which is very wrong of course.
Per report from Michael Fuhr.
exit. Without this, operations triggered during backend exit (such as
temp table deletions) won't be counted ... which given heavy usage of
temp tables can lead to pg_autovacuum falling way behind on the need
to vacuum pg_class and pg_attribute. Per reports from Steve Crawford
and others.
old comment in the code claimed that this was necessary. Since it is not
actually necessary any more, it is clearer to remove the comment and
just return NULL instead -- the return value of ExecHash() is not used.
proposal for OUT parameter support. The columns don't actually *do*
anything yet, they are just left NULLs. But I thought I'd commit this
part separately as a fairly pure example of the tasks needed when adding
a column to pg_proc or one of the other core system tables.
implement any new feature, it just pushes the 'not implemented' error
message deeper into the backend. I also tweaked the grammar to accept
Oracle-ish parameter syntax (parameter name first), as well as the
SQL99 standard syntax (parameter mode first), since it was easy and
people will doubtless try to use both anyway.
change saves a great deal of space in pg_proc and its primary index,
and it eliminates the former requirement that INDEX_MAX_KEYS and
FUNC_MAX_ARGS have the same value. INDEX_MAX_KEYS is still embedded
in the on-disk representation (because it affects index tuple header
size), but FUNC_MAX_ARGS is not. I believe it would now be possible
to increase FUNC_MAX_ARGS at little cost, but haven't experimented yet.
There are still a lot of vestigial references to FUNC_MAX_ARGS, which
I will clean up in a separate pass. However, getting rid of it
altogether would require changing the FunctionCallInfoData struct,
and I'm not sure I want to buy into that.
transaction rollback via UNDO but I think that's highly unlikely to
happen, so we may as well remove the stubs. (Someday we ought to
rip out the stub xxx_undo routines, too.) Per Alvaro.
really ought to run before canonicalize_qual, because it can now produce
forms that canonicalize_qual knows how to improve (eg, NOT clauses).
Also, because eval_const_expressions already knows about flattening
nested ANDs and ORs into N-argument form, the initial flatten_andors
pass in canonicalize_qual is now completely redundant and can be
removed. This doesn't save a whole lot of code, but the time and
palloc traffic eliminated is a useful gain on large expression trees.
access: define new index access method functions 'amgetmulti' that can
fetch multiple TIDs per call. (The functions exist but are totally
untested as yet.) Since I was modifying pg_am anyway, remove the
no-longer-needed 'rel' parameter from amcostestimate functions, and
also remove the vestigial amowner column that was creating useless
work for Alvaro's shared-object-dependencies project.
Initdb forced due to changes in pg_am.
that is 'x = true' becomes 'x' and 'x = false' becomes 'NOT x'. This isn't
all that amazingly useful in itself, but it ensures that we will recognize
the different forms as being logically equivalent when checking partial
index predicates. Per example from Patrick Clery.
structs. There are many places in the planner where we were passing
both a rel and an index to subroutines, and now need only pass the
index struct. Notationally simpler, and perhaps a tad faster.
for boolean indexes. Previously we would only use such an index with
WHERE clauses like 'indexkey = true' or 'indexkey = false'. The new
code transforms the cases 'indexkey', 'NOT indexkey', 'indexkey IS TRUE',
and 'indexkey IS FALSE' into one of these. While this is only marginally
useful in itself, I intend soon to change constant-expression simplification
so that 'foo = true' and 'foo = false' are reduced to just 'foo' and
'NOT foo' ... which would lose the ability to use boolean indexes for
such queries at all, if the indexscan machinery couldn't make the
reverse transformation.
binary-compatible relabeling of one or both operands. examine_variable
should avoid stripping RelabelType from non-variable expressions, so that
they will continue to have the correct type; and convert_to_scalar should
just use that type and ignore the other input type. This isn't perfect
but it beats failing entirely. Per example from Michael Fuhr.
when a zero-month interval is given. Per discussion with Karel.
Also, some desultory const-labeling of constant tables. More could be
done along that line.
actual number of unremoved tuples as pg_class.reltuples. The idea of
trying to estimate a steady state condition still seems attractive, but
this particular implementation crashed and burned ...
executing a statement that fires triggers. Formerly this time was
included in "Total runtime" but not otherwise accounted for.
As a side benefit, we avoid re-opening relations when firing non-deferred
AFTER triggers, because the trigger code can re-use the main executor's
ResultRelInfo data structure.
when open references remain during normal cleanup of a resource owner.
This restores the system's ability to warn about leaks to what it was
before 8.0. Not really a user-level bug, but helpful for development.
overly strong lock on pg_depend, and it wasn't closing the rel when done.
The latter bug was masked by the ResourceOwner code, which is something
that should be changed.
never-yet-vacuumed relation. This restores the pre-8.0 behavior of
avoiding seqscans during initial data loading, while still allowing
reasonable optimization after a table has been vacuumed. Several
regression test cases revert to 7.4-like behavior, which is probably
a good sign. Per gripes from Keith Browne and others.
* Touch the socket and lock file at least every hour, to
* ensure that they are not removed by overzealous /tmp-cleaning
* tasks. Set to 58 minutes so a cleaner never sees the
* file as an hour old.
currently does. This is now the default Win32 wal sync method because
we perfer o_datasync to fsync.
Also, change Win32 fsync to a new wal sync method called
fsync_writethrough because that is the behavior of _commit, which is
what is used for fsync on Win32.
Backpatch to 8.0.X.
