This commit fixes COMMIT AND CHAIN command so that it starts new transaction
immediately even if savepoints are defined within the transaction to commit.
Previously COMMIT AND CHAIN command did not in that case because
commit 280a408b48 forgot to make CommitTransactionCommand() handle
a transaction chaining when the transaction state was TBLOCK_SUBCOMMIT.
Also this commit adds the regression test for COMMIT AND CHAIN command
when savepoints are defined.
Back-patch to v12 where transaction chaining was added.
Reported-by: Arthur Nascimento
Author: Fujii Masao
Reviewed-by: Arthur Nascimento, Vik Fearing
Discussion: https://postgr.es/m/16867-3475744069228158@postgresql.org
Consolidate discussion of how VACUUM places pages in the FSM for
recycling by adding a new section that comes after discussion of page
deletion. This structure reflects the fact that page recycling is
explicitly decoupled from page deletion in Lanin & Shasha's paper. Page
recycling in nbtree is an implementation of what the paper calls "the
drain technique".
This decoupling is an important concept for nbtree VACUUM. Searchers
have to detect and recover from concurrent page deletions, but they will
never have to reason about concurrent page recycling. Recycling can
almost always be thought of as a low level garbage collection operation
that asynchronously frees the physical space that backs a logical tree
node. Almost all code need only concern itself with logical tree nodes.
(Note that "logical tree node" is not currently a term of art in the
nbtree code -- this all works implicitly.)
This is preparation for an upcoming patch that teaches nbtree VACUUM to
remember the details of pages that it deletes on the fly, in local
memory. This enables the same VACUUM operation to consider placing its
own deleted pages in the FSM later on, when it reaches the end of
btvacuumscan().
While poking at the regex code, I happened to notice that the bug
squashed in commit afcc8772e had a sibling: next() failed to return
a specific value associated with the '}' token for a "\{m,n\}"
quantifier when parsing in basic RE mode. Again, this could result
in treating the quantifier as non-greedy, which it never should be in
basic mode. For that to happen, the last character before "\}" that
sets "nextvalue" would have to set it to zero, or it'd have to have
accidentally been zero from the start. The failure can be provoked
repeatably with, for example, a bound ending in digit "0".
Like the previous patch, back-patch all the way.
Commit 2c8dd05d6c added the atomic variable writtenUpto into
walreceiver's shared memory information. It's initialized only
when walreceiver started up but could be read via pg_stat_wal_receiver
view anytime, i.e., even before it's initialized. In the server built
with --disable-atomics and --disable-spinlocks, this uninitialized
atomic variable read could cause "invalid spinlock number: 0" error.
This commit changed writtenUpto so that it's initialized at
the postmaster startup, to avoid the uninitialized variable read
via pg_stat_wal_receiver and fix the error.
Also this commit moved the read of writtenUpto after the release
of spinlock protecting walreceiver's shared variables. This is
necessary to prevent new spinlock from being taken by atomic
variable read while holding another spinlock, and to shorten
the spinlock duration. This change leads writtenUpto not to be
consistent with the other walreceiver's shared variables protected
by a spinlock. But this is OK because writtenUpto should not be
used for data integrity checks.
Back-patch to v13 where commit 2c8dd05d6c introduced the bug.
Author: Fujii Masao
Reviewed-by: Michael Paquier, Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/7ef8708c-5b6b-edd3-2cf2-7783f1c7c175@oss.nttdata.com
Add another method to specify CRLs, hashed directory method, for both
server and client side. This offers a means for server or libpq to
load only CRLs that are required to verify a certificate. The CRL
directory is specifed by separate GUC variables or connection options
ssl_crl_dir and sslcrldir, alongside the existing ssl_crl_file and
sslcrl, so both methods can be used at the same time.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/20200731.173911.904649928639357911.horikyota.ntt@gmail.com
Discuss VACUUM's linear scan after discussion of tuple deletion by
VACUUM, but before discussion of page deletion by VACUUM. This
progression is a lot more natural.
Also tweak the wording a little. It seems unnecessary to talk about how
it worked prior to PostgreSQL 8.2.
A cross-partition update on a partitioned table is implemented as a
delete followed by an insert. With foreign partitions, this was however
causing issues, because the FDW and core may disagree on when to enable
batching. postgres_fdw was only allowing batching for plain inserts
(CMD_INSERT) while core was trying to batch the insert component of the
cross-partition update. Fix by restricting core to apply batching only
to plain CMD_INSERT queries.
It's possible to allow batching for cross-partition updates, but that
will require more extensive changes, so better to leave that for a
separate patch.
Author: Amit Langote
Reviewed-by: Tomas Vondra, Takayuki Tsunakawa
Discussion: https://postgr.es/m/20200628151002.7x5laxwpgvkyiu3q@development
Push some hopefully-uncontroversial bits extracted from an upcoming
patch series, to remove non-relevant clutter from the main patches.
In compact(), return immediately after setting REG_ASSERT error;
continuing the loop would just lead to assertion failure below.
(Ask me how I know.)
In parseqatom(), remove assertion that moresubs() did its job.
When moresubs actually did its job, this is redundant with that
function's final assert; but when it failed on OOM, this is an
assertion crash. We could avoid the crash by adding a NOERR()
check before the assertion, but it seems better to subtract code
than add it. (Note that there's a NOERR exit a few lines further
down, and nothing else between here and there requires moresubs
to have succeeded. So we don't really need an extra error exit.)
This is a live bug in assert-enabled builds, but given the very
low likelihood of OOM in moresub's tiny allocation, I don't think
it's worth back-patching.
On the other hand, it seems worthwhile to add an assertion that
our intended v->subs[subno] target is still null by the time we
are ready to insert into it, since there's a recursion in between.
In pg_regexec, ensure we fflush any debug output on the way out,
and try to make MDEBUG messages more uniform and helpful. (In
particular, ensure that all of them are prefixed with the subre's
id number, so one can match up entry and exit reports.)
Add some test cases in test_regex to improve coverage of lookahead
and lookbehind constraints. Adding these now is mainly to establish
that this is indeed the existing behavior.
Discussion: https://postgr.es/m/1340281.1613018383@sss.pgh.pa.us
Several information schema views track dependencies between
functions/procedures and objects used by them. These had not been
implemented so far because PostgreSQL doesn't track objects used in a
function body. However, formally, these also show dependencies used
in parameter default expressions, which PostgreSQL does support and
track. So for the sake of completeness, we might as well add these.
If dependency tracking for function bodies is ever implemented, these
views will automatically work correctly.
Reviewed-by: Erik Rijkers <er@xs4all.nl>
Discussion: https://www.postgresql.org/message-id/flat/ac80fc74-e387-8950-9a31-2560778fc1e3%40enterprisedb.com
ALTER INDEX was able to handle that already. This adds tab completion
for all the remaining commands that support this grammar:
- ALTER FUNCTION
- ALTER PROCEDURE
- ALTER ROUTINE
- ALTER TRIGGER
- ALTER MATERIALIZED VIEW
Author: Ian Lawrence Barwick
Discussion: https://postgr.es/m/CAB8KJ=iypYudXuMOAMOP4BpkaYbXxk=a2cdJppX0e9mJXWtuig@mail.gmail.com
Commit 2f2007fbb did this partially, but there were two remaining
warts. checkcondition_gin handled some uncertain cases by setting
the out-of-band recheck flag, some by returning TS_MAYBE, and some
by doing both. Meanwhile, TS_execute arbitrarily converted a
TS_MAYBE result to TS_YES. Thus, if checkcondition_gin chose to
only return TS_MAYBE, the outcome would be TS_YES with no recheck
flag, potentially resulting in wrong query outputs.
The case where this'd happen is if there were GIN_MAYBE entries
in the indexscan results passed to gin_tsquery_[tri]consistent,
which so far as I can see would only happen if the tidbitmap used
to accumulate indexscan results grew large enough to become lossy.
I initially thought of fixing this by ensuring we always set the
recheck flag as well as returning TS_MAYBE in uncertain cases.
But that errs in the other direction, potentially forcing rechecks
of rows that provably match the query (since the recheck flag
remains set even if TS_execute later finds that the answer must be
TS_YES). Instead, let's get rid of the out-of-band recheck flag
altogether and rely on returning TS_MAYBE. This requires exporting
a version of TS_execute that will actually return the full ternary
result of the evaluation ... but we likely should have done that
to start with.
Unfortunately it doesn't seem practical to add a regression test case
that covers this: the amount of data needed to cause the GIN bitmap to
become lossy results in a longer runtime than I think we want to have
in the tests. (I'm wondering about allowing smaller work_mem settings
to ameliorate that, but it'd be a matter for a separate patch.)
Per bug #16865 from Dimitri Nüscheler. Back-patch to v13 where
the faulty commit came in.
Discussion: https://postgr.es/m/16865-4ffdc3e682e6d75b@postgresql.org
This issue exists from the inception of this code (PG-10) but got exposed
by the recent commit ce0fdbfe97 where we are using origins in tablesync
workers. The problem was that we were sometimes sending the prepare_write
('w') message but then the actual message was not being sent and on the
subscriber side, we always expect a message after prepare_write message
which led to this bug.
I refrained from backpatching this because there is no way in the core
code to hit this prior to commit ce0fdbfe97 and we haven't received any
complaints so far.
Reported-by: Erik Rijkers
Author: Amit Kapila and Vignesh C
Tested-by: Erik Rijkers
Discussion: https://postgr.es/m/1295168140.139428.1613133237154@webmailclassic.xs4all.nl
Both luckily and unluckily the passed values meant the same for all
types. Luckily because that meant my confusion caused no harm,
unluckily because otherwise the compiler might have warned...
In passing, synchronize parameter names between definition and
declaration.
Reported-By: Peter Geoghegan <pg@bowt.ie>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-Wz=L=nBoepQdH9b5Qd0nMvepFT2CnT6sjWvvpOXa=K8HVQ@mail.gmail.com
In 955a684e04 we fixed a bug in initial snapshot creation. In the
course of which several members of struct SnapBuild were obsoleted. As
SnapBuild is serialized to disk we couldn't change the memory layout.
Unfortunately I subsequently forgot about removing the backward compat
gunk, but luckily Heikki just reminded me.
This commit bumps SNAPBUILD_VERSION, therefore breaking existing
slots (which is fine in a major release).
Author: Andres Freund
Reminded-By: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/c94be044-818f-15e3-1ad3-7a7ae2dfed0a@iki.fi
The inner loop in switchToPresortedPrefixMode() can be implemented
as a conventional integer-counter for() loop, removing a couple of
redundant boolean state variables. The old logic here was a remnant
of earlier development, but as things now stand there's no reason
for extra complexity.
Also, annotate the test case added by 82e0e2930 to explain why it
manages to hit the corner case fixed in that commit, and add an
EXPLAIN to verify that it's creating an incremental-sort plan.
Back-patch to v13, like the previous patch.
James Coleman and Tom Lane
Discussion: https://postgr.es/m/16846-ae49f51ac379a4cb@postgresql.org
If ExecGetInsertedCols(), ExecGetUpdatedCols() or ExecGetExtraUpdatedCols()
were called with a ResultRelInfo that's not in the range table and isn't a
partition routing target, the functions would dereference a NULL pointer,
relinfo->ri_RootResultRelInfo. Such ResultRelInfos are created when firing
RI triggers in tables that are not modified directly. None of the current
callers of these functions pass such relations, so this isn't a live bug,
but let's make them more robust.
Also update comment in ResultRelInfo; after commit 6214e2b228,
ri_RangeTableIndex is zero for ResultRelInfos created for partition tuple
routing.
Noted by Coverity. Backpatch down to v11, like commit 6214e2b228.
Reviewed-by: Tom Lane, Amit Langote
This commit adds new column "waitstart" into pg_locks view. This column
reports the time when the server process started waiting for the lock
if the lock is not held. This information is useful, for example, when
examining the amount of time to wait on a lock by subtracting
"waitstart" in pg_locks from the current time, and identify the lock
that the processes are waiting for very long.
This feature uses the current time obtained for the deadlock timeout
timer as "waitstart" (i.e., the time when this process started waiting
for the lock). Since getting the current time newly can cause overhead,
we reuse the already-obtained time to avoid that overhead.
Note that "waitstart" is updated without holding the lock table's
partition lock, to avoid the overhead by additional lock acquisition.
This can cause "waitstart" in pg_locks to become NULL for a very short
period of time after the wait started even though "granted" is false.
This is OK in practice because we can assume that users are likely to
look at "waitstart" when waiting for the lock for a long time.
The first attempt of this patch (commit 3b733fcd04) caused the buildfarm
member "rorqual" (built with --disable-atomics --disable-spinlocks) to report
the failure of the regression test. It was reverted by commit 890d2182a2.
The cause of this failure was that the atomic variable for "waitstart"
in the dummy process entry created at the end of prepare transaction was
not initialized. This second attempt fixes that issue.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Ian Lawrence Barwick, Robert Haas, Justin Pryzby, Fujii Masao
Discussion: https://postgr.es/m/a96013dc51cdc56b2a2b84fa8a16a993@oss.nttdata.com
GistPageSetDeleted() sets pd_lower when deleting a page, and sets the
page contents to a GISTDeletedPageContents. Avoid treating deleted GiST
pages as regular slotted pages within pageinspect.
Oversight in commit 756ab291.
Author: Andrey Borodin <x4mmm@yandex-team.ru>
FreeBSD 13 gained O_DSYNC, which would normally cause wal_sync_method to
choose open_datasync as its default value. That may not be a good
choice for all systems, and performs worse than fdatasync in some
scenarios. Let's preserve the existing default behavior for now.
Like commit 576477e73c, which did the same for Linux, back-patch to all
supported releases.
Discussion: https://postgr.es/m/CA%2BhUKGLsAMXBQrCxCXoW-JsUYmdOL8ALYvaX%3DCrHqWxm-nWbGA%40mail.gmail.com
While cleaning up after a parallel query or parallel index creation that
created temporary files, we could be interrupted by a statement timeout.
The error handling path would then fail to clean up the files when it
ran dsm_detach() again, because the callback was already popped off the
list. Prevent this hazard by holding interrupts while the cleanup code
runs.
Thanks to Heikki Linnakangas for this suggestion, and also to Kyotaro
Horiguchi, Masahiko Sawada, Justin Pryzby and Tom Lane for discussion of
this and earlier ideas on how to fix the problem.
Back-patch to all supported releases.
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20191212180506.GR2082@telsasoft.com
With its current design, a careless use of pg_cryptohash_final() could
would result in an out-of-bound write in memory as the size of the
destination buffer to store the result digest is not known to the
cryptohash internals, without the caller knowing about that. This
commit adds a new argument to pg_cryptohash_final() to allow such sanity
checks, and implements such defenses.
The internals of SCRAM for HMAC could be tightened a bit more, but as
everything is based on SCRAM_KEY_LEN with uses particular to this code
there is no need to complicate its interface more than necessary, and
this comes back to the refactoring of HMAC in core. Except that, this
minimizes the uses of the existing DIGEST_LENGTH variables, relying
instead on sizeof() for the result sizes. In ossp-uuid, this also makes
the code more defensive, as it already relied on dce_uuid_t being at
least the size of a MD5 digest.
This is in philosophy similar to cfc40d3 for base64.c and aef8948 for
hex.c.
Reported-by: Ranier Vilela
Author: Michael Paquier, Ranier Vilela
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/CAEudQAoqEGmcff3J4sTSV-R_16Monuz-UpJFbf_dnVH=APr02Q@mail.gmail.com
When REG_DEBUG is defined, ensure that an un-filled "struct cnfa"
is all-zeroes, not just that it has nstates == 0. This is mainly
so that looking at "struct subre" structs in gdb doesn't distract
one with a lot of garbage fields during regex compilation.
Adjust some places that print debug output to have suitable fflush
calls afterwards.
In passing, correct an erroneous ancient comment: the concatenation
subre-s created by parsebranch() have op == '.' not ','.
Noted while fooling around with some regex performance improvements.
Given a regex pattern with a very long fixed prefix (approaching 500
characters), the result of pow(FIXED_CHAR_SEL, fixed_prefix_len) can
underflow to zero. Typically the preceding selectivity calculation
would have underflowed as well, so that we compute 0/0 and get NaN.
In released branches this leads to an assertion failure later on.
That doesn't happen in HEAD, for reasons I've not explored yet,
but it's surely still a bug.
To fix, just skip the division when the pow() result is zero, so
that we'll (most likely) return a zero selectivity estimate. In
the edge cases where "sel" didn't yet underflow, perhaps this
isn't desirable, but I'm not sure that the case is worth spending
a lot of effort on. The results of regex_selectivity_sub() are
barely worth the electrons they're written on anyway :-(
Per report from Alexander Lakhin. Back-patch to all supported versions.
Discussion: https://postgr.es/m/6de0a0c3-ada9-cd0c-3e4e-2fa9964b41e3@gmail.com
Modern gcc and clang compilers offer alignment sanitizers, which help to detect
pointer misalignment. However, our codebase already contains x86-specific
crc32 computation code, which uses unalignment access. Thankfully, those
compilers also support the attribute, which disables alignment sanitizers at
the function level. This commit adds pg_attribute_no_sanitize_alignment(),
which wraps this attribute, and applies it to pg_comp_crc32c_sse42() function.
Discussion: https://postgr.es/m/CAPpHfdsne3%3DT%3DfMNU45PtxdhSL_J2PjLTeS8rwKnJzUR4YNd4w%40mail.gmail.com
Discussion: https://postgr.es/m/475514.1612745257%40sss.pgh.pa.us
Author: Alexander Korotkov, revised by Tom Lane
Reviewed-by: Tom Lane
We want to test the variants of Alter Subscription that are not allowed in
the transaction block but for that, we don't need to create a subscription
that tries to connect to the publisher. As such, there is no problem with
this test but it is good to allow such tests to run with
wal_level = minimal and max_wal_senders = 0 so as to keep them consistent
with other tests.
Reported by buildfarm.
Author: Amit Kapila
Reviewed-by: Ajin Cherian
Discussion: https://postgr.es/m/CAA4eK1Lw0V+e1JPGHDq=+hVACv=14H8sR+2eJ1k3PEgwKmU-jQ@mail.gmail.com
For the initial table data synchronization in logical replication, we use
a single transaction to copy the entire table and then synchronize the
position in the stream with the main apply worker.
There are multiple downsides of this approach: (a) We have to perform the
entire copy operation again if there is any error (network breakdown,
error in the database operation, etc.) while we synchronize the WAL
position between tablesync worker and apply worker; this will be onerous
especially for large copies, (b) Using a single transaction in the
synchronization-phase (where we can receive WAL from multiple
transactions) will have the risk of exceeding the CID limit, (c) The slot
will hold the WAL till the entire sync is complete because we never commit
till the end.
This patch solves all the above downsides by allowing multiple
transactions during the tablesync phase. The initial copy is done in a
single transaction and after that, we commit each transaction as we
receive. To allow recovery after any error or crash, we use a permanent
slot and origin to track the progress. The slot and origin will be removed
once we finish the synchronization of the table. We also remove slot and
origin of tablesync workers if the user performs DROP SUBSCRIPTION .. or
ALTER SUBSCRIPTION .. REFERESH and some of the table syncs are still not
finished.
The commands ALTER SUBSCRIPTION ... REFRESH PUBLICATION and
ALTER SUBSCRIPTION ... SET PUBLICATION ... with refresh option as true
cannot be executed inside a transaction block because they can now drop
the slots for which we have no provision to rollback.
This will also open up the path for logical replication of 2PC
transactions on the subscriber side. Previously, we can't do that because
of the requirement of maintaining a single transaction in tablesync
workers.
Bump catalog version due to change of state in the catalog
(pg_subscription_rel).
Author: Peter Smith, Amit Kapila, and Takamichi Osumi
Reviewed-by: Ajin Cherian, Petr Jelinek, Hou Zhijie and Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1KHJxaZS-fod-0fey=0tq3=Gkn4ho=8N4-5HWiCfu0H1A@mail.gmail.com
The pages_removed field is no longer used for anything. It hasn't been
possible for an index to physically shrink since old-style VACUUM FULL
was removed by commit 0a469c87.
The stanza in ECPGconnect() that intended to allow specification of a
Unix socket directory path in place of a port has never executed since
it was committed, nearly two decades ago; the preceding strrchr()
already found the last colon so there cannot be another one. The lack
of complaints about that is doubtless related to the fact that no
user-facing documentation suggested it was possible.
Rather than try to fix that up, let's just remove the unreachable
code, and instead document the way that does work to write a socket
directory path, namely specifying it as a "host" option.
In support of that, make another pass at clarifying the syntax
documentation for ECPG connection targets, particularly documenting
which things are parsed as identifiers and where to use double quotes.
Rearrange some things that seemed poorly ordered, and fix a couple of
minor doc errors.
Kyotaro Horiguchi, per gripe from Shenhao Wang
(docs changes mostly by me)
Discussion: https://postgr.es/m/ae52a416bbbf459c96bab30b3038e06c@G08CNEXMBPEKD06.g08.fujitsu.local
Explicitly testing for INT_MIN and INT_MAX isn't particularly good
style; it's tedious and may draw useless compiler warnings on
machines where int and long are the same width. We invented
strtoint() precisely for this usage, so use that instead.
While here, remove gratuitous variations in the way the tests for
did-strtoint-succeed were spelled. Also, avoid attempting to
negate INT_MIN; that would probably work given that the result
is implicitly cast to uint32, but I think it's nominally undefined
behavior.
Per gripe from Ranier Vilela, though this isn't his proposed patch.
Discussion: https://postgr.es/m/CAEudQAqge3QfzoBRhe59QrB_5g+NmQUj2QpzqZ9Nc7QepXGAEw@mail.gmail.com
In the wake of c028faf2a, this is no longer needed. I left it
out of that patch since the API change would be undesirable in
a released branch; but there's no reason not to do it in HEAD.
This commit makes more generic some comments and code related to the
compilation with OpenSSL and SSL in general to ease the addition of more
SSL implementations in the future. In libpq, some OpenSSL-only code is
moved under USE_OPENSSL and not USE_SSL.
While on it, make a comment more consistent in libpq-fe.h.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/5382CB4A-9CF3-4145-BA46-C802615935E0@yesql.se