This reverts commit b9515b6287.
Buildfarm results suggest that some platforms have versions of pselect(2)
that are not merely non-atomic, but flat out non-functional. Revert the
use-pselect patch to confirm this diagnosis (and exclude the no-SA_RESTART
patch as the source of trouble). If it's so, we should probably look into
blacklisting specific platforms that have broken pselect.
Discussion: https://postgr.es/m/9696.1493072081@sss.pgh.pa.us
Traditionally we've unblocked signals, called select(2), and then blocked
signals again. The code expects that the select() will be cancelled with
EINTR if an interrupt occurs; but there's a race condition, which is that
an already-pending signal will be delivered as soon as we unblock, and then
when we reach select() there will be nothing preventing it from waiting.
This can result in a long delay before we perform any action that
ServerLoop was supposed to have taken in response to the signal. As with
the somewhat-similar symptoms fixed by commit 893902085, the main practical
problem is slow launching of parallel workers. The window for trouble is
usually pretty short, corresponding to one iteration of ServerLoop; but
it's not negligible.
To fix, use pselect(2) in place of select(2) where available, as that's
designed to solve exactly this problem. Where not available, we continue
to use the old way, and are no worse off than before.
pselect(2) has been required by POSIX since about 2001, so most modern
platforms should have it. A bigger portability issue is that some
implementations are said to be non-atomic, ie pselect() isn't really
any different from unblock/select/reblock. Still, we're no worse off
than before on such a platform.
There is talk of rewriting the postmaster to use a WaitEventSet and
not do signal response work in signal handlers, at which point this
could be reverted, since we'd be using a self-pipe to solve the race
condition. But that's not happening before v11 at the earliest.
Back-patch to 9.6. The problem exists much further back, but the
worst symptom arises only in connection with parallel query, so it
does not seem worth taking any portability risks in older branches.
Discussion: https://postgr.es/m/9205.1492833041@sss.pgh.pa.us
LibreSSL defines OPENSSL_VERSION_NUMBER to claim that it is version 2.0.0,
but it doesn't have the functions added in OpenSSL 1.1.0. Add autoconf
checks for the individual functions we need, and stop relying on
OPENSSL_VERSION_NUMBER.
Backport to 9.5 and 9.6, like the patch that broke this. In the
back-branches, there are still a few OPENSSL_VERSION_NUMBER checks left,
to check for OpenSSL 0.9.8 or 0.9.7. I left them as they were - LibreSSL
has all those functions, so they work as intended.
Per buildfarm member curculio.
Discussion: <2442.1473957669@sss.pgh.pa.us>
Changes needed to build at all:
- Check for SSL_new in configure, now that SSL_library_init is a macro.
- Do not access struct members directly. This includes some new code in
pgcrypto, to use the resource owner mechanism to ensure that we don't
leak OpenSSL handles, now that we can't embed them in other structs
anymore.
- RAND_SSLeay() -> RAND_OpenSSL()
Changes that were needed to silence deprecation warnings, but were not
strictly necessary:
- RAND_pseudo_bytes() -> RAND_bytes().
- SSL_library_init() and OpenSSL_config() -> OPENSSL_init_ssl()
- ASN1_STRING_data() -> ASN1_STRING_get0_data()
- DH_generate_parameters() -> DH_generate_parameters()
- Locking callbacks are not needed with OpenSSL 1.1.0 anymore. (Good
riddance!)
Also change references to SSLEAY_VERSION_NUMBER with OPENSSL_VERSION_NUMBER,
for the sake of consistency. OPENSSL_VERSION_NUMBER has existed since time
immemorial.
Fix SSL test suite to work with OpenSSL 1.1.0. CA certificates must have
the "CA:true" basic constraint extension now, or OpenSSL will refuse them.
Regenerate the test certificates with that. The "openssl" binary, used to
generate the certificates, is also now more picky, and throws an error
if an X509 extension is specified in "req_extensions", but that section
is empty.
Backpatch to 9.5 and 9.6, per popular demand. The file structure was
somewhat different in earlier branches, so I didn't bother to go further
than that. In back-branches, we still support OpenSSL 0.9.7 and above.
OpenSSL 0.9.6 should still work too, but I didn't test it. In master, we
only support 0.9.8 and above.
Patch by Andreas Karlsson, with additional changes by me.
Discussion: <20160627151604.GD1051@msg.df7cb.de>
Create a "bsd" auth method that works the same as "password" so far as
clients are concerned, but calls the BSD Authentication service to
check the password. This is currently only available on OpenBSD.
Marisa Emerson, reviewed by Thomas Munro
Commit ac1d794 ("Make idle backends exit if the postmaster dies.")
introduced a regression on, at least, large linux systems. Constantly
adding the same postmaster_alive_fds to the OSs internal datastructures
for implementing poll/select can cause significant contention; leading
to a performance regression of nearly 3x in one example.
This can be avoided by using e.g. linux' epoll, which avoids having to
add/remove file descriptors to the wait datastructures at a high rate.
Unfortunately the current latch interface makes it hard to allocate any
persistent per-backend resources.
Replace, with a backward compatibility layer, WaitLatchOrSocket with a
new WaitEventSet API. Users can allocate such a Set across multiple
calls, and add more than one file-descriptor to wait on. The latter has
been added because there's upcoming postgres features where that will be
helpful.
In addition to the previously existing poll(2), select(2),
WaitForMultipleObjects() implementations also provide an epoll_wait(2)
based implementation to address the aforementioned performance
problem. Epoll is only available on linux, but that is the most likely
OS for machines large enough (four sockets) to reproduce the problem.
To actually address the aforementioned regression, create and use a
long-lived WaitEventSet for FE/BE communication. There are additional
places that would benefit from a long-lived set, but that's a task for
another day.
Thanks to Amit Kapila, who helped make the windows code I blindly wrote
actually work.
Reported-By: Dmitry Vasilyev Discussion:
CAB-SwXZh44_2ybvS5Z67p_CDz=XFn4hNAD=CnMEF+QqkXwFrGg@mail.gmail.com20160114143931.GG10941@awork2.anarazel.de
Previously latches for windows and unix had been implemented in
different files. A later patch introduce an expanded wait
infrastructure, keeping the implementation separate would introduce too
much duplication.
This basically just moves the functions, without too much change. The
reason to keep this separate is that it allows blame to continue working
a little less badly; and to make review a tiny bit easier.
Discussion: 20160114143931.GG10941@awork2.anarazel.de
Previously, we included <xlocale.h> only if necessary to get the definition
of type locale_t. According to notes in PGAC_TYPE_LOCALE_T, this is
important because on some versions of glibc that file supplies an
incompatible declaration of locale_t. (This info may be obsolete, because
on my RHEL6 box that seems to be the *only* definition of locale_t; but
there may still be glibc's in the wild for which it's a live concern.)
It turns out though that on FreeBSD and maybe other BSDen, you can get
locale_t from stdlib.h or locale.h but mbstowcs_l() and friends only from
<xlocale.h>. This was leaving us compiling calls to mbstowcs_l() and
friends with no visible prototype, which causes a warning and could
possibly cause actual trouble, since it's not declared to return int.
Hence, adjust the configure checks so that we'll include <xlocale.h>
either if it's necessary to get type locale_t or if it's necessary to
get a declaration of mbstowcs_l().
Report and patch by Aleksander Alekseev, somewhat whacked around by me.
Back-patch to all supported branches, since we have been using
mbstowcs_l() since 9.1.
Previously, configure would take any string, including an empty string,
leading to obscure compile failures in guc.c. It seems worth expending
a few lines of code to ensure that the argument is a decimal number
between 1 and 65535.
Report and patch by Jim Nasby; reviews by Alex Shulgin, Peter Eisentraut,
Ivan Kartyshov
Insert sd_notify() calls at server start and stop for integration with
systemd. This allows the use of systemd service units of type "notify",
which greatly simplifies the systemd configuration.
Reviewed-by: Pavel Stěhule <pavel.stehule@gmail.com>
Further portability fix for a967613911. Mingw- and MSVC-based builds
appear to be working fine, but Cygwin needs an extra tweak whereby the
new win32security.c file is explicitely added to the list of files to
build in pgport, per Cygwin members brolga and lorikeet.
Author: Michael Paquier
It emerges that libreadline doesn't notice terminal window size change
events unless they occur while collecting input. This is easy to stumble
over if you resize the window while using a pager to look at query output,
but it can be demonstrated without any pager involvement. The symptom is
that queries exceeding one line are misdisplayed during subsequent input
cycles, because libreadline has the wrong idea of the screen dimensions.
The safest, simplest way to fix this is to call rl_reset_screen_size()
just before calling readline(). That causes an extra ioctl(TIOCGWINSZ)
for every command; but since it only happens when reading from a tty, the
performance impact should be negligible. A more valid objection is that
this still leaves a tiny window during entry to readline() wherein delivery
of SIGWINCH will be missed; but the practical consequences of that are
probably negligible. In any case, there doesn't seem to be any good way to
avoid the race, since readline exposes no functions that seem safe to call
from a generic signal handler --- rl_reset_screen_size() certainly isn't.
It turns out that we also need an explicit rl_initialize() call, else
rl_reset_screen_size() dumps core when called before the first readline()
call.
rl_reset_screen_size() is not present in old versions of libreadline,
so we need a configure test for that. (rl_initialize() is present at
least back to readline 4.0, so we won't bother with a test for it.)
We would need a configure test anyway since libedit's emulation of
libreadline doesn't currently include such a function. Fortunately,
libedit seems not to have any corresponding bug.
Merlin Moncure, adjusted a bit by me
This is like BSWAP32, but for 64-bit values. Since we've got two of
them now and they have use cases (like sortsupport) beyond CRCs, move
the definitions to their own header file.
Peter Geoghegan
Remove configure's checks for HAVE_POSIX_SIGNALS, HAVE_SIGPROCMASK, and
HAVE_SIGSETJMP. These APIs are required by the Single Unix Spec v2
(POSIX 1997), which we generally consider to define our minimum required
set of Unix APIs. Moreover, no buildfarm member has reported not having
them since 2012 or before, which means that even if the code is still live
somewhere, it's untested --- and we've made plenty of signal-handling
changes of late. So just take these APIs as given and save the cycles for
configure probes for them.
However, we can't remove as much C code as I'd hoped, because the Windows
port evidently still uses the non-POSIX code paths for signal masking.
Since we're largely emulating these BSD-style APIs for Windows anyway, it
might be a good thing to switch over to POSIX-like notation and thereby
remove a few more #ifdefs. But I'm not in a position to code or test that.
In the meantime, we can at least make things a bit more transparent by
testing for WIN32 explicitly in these places.
C89 requires <signal.h> to define sig_atomic_t, and there is no evidence
in the buildfarm that any supported platforms don't comply. Remove the
configure test to stop wasting build cycles on a purely historical issue.
(Once upon a time, we cared about supporting C89-compliant compilers on
machines with pre-C89 system headers, but that use-case has been dead for
quite a few years.)
I have some other fixes planned in this area, but let's start with this
to see if the buildfarm produces any surprising results.
So far we have worked around the fact that some very old compilers do
not support 'inline' functions by only using inline functions
conditionally (or not at all). Since such compilers are very rare by
now, we have decided to rely on inline functions from 9.6 onwards.
To avoid breaking these old compilers inline is defined away when not
supported. That'll cause "function x defined but not used" type of
warnings, but since nobody develops on such compilers anymore that's
ok.
This change in policy will allow us to more easily employ inline
functions.
I chose to remove code previously conditional on PG_USE_INLINE as it
seemed confusing to have code dependent on a define that's always
defined.
Blacklisting of compilers, like in c53f73879f, now has to be done
differently. A platform template can define PG_FORCE_DISABLE_INLINE to
force inline to be defined empty.
Discussion: 20150701161447.GB30708@awork2.anarazel.de
xlc provides "long long" unconditionally at C99-compatible language
levels, and this option provokes a warning. The warning interferes with
"configure" tests that fail in response to any warning. Notably, before
commit 85a2a8903f, it interfered with the
test for -qnoansialias. Back-patch to 9.0 (all supported versions).
Autoconf generates additional code for the first AC_CHECK_HEADERS call in
the script. If the first call is within an if-block, the additional code is
put inside the if-block too, even though it is needed by subsequent
AC_CHECK_HEADERS checks and should always be executed. When I moved the
pthread-related checks earlier in the script, the pthread.h test inside
the block became the very first AC_CHECK_HEADERS call in the script,
triggering that problem.
To fix, use AS_IF instead of plain shell if. AS_IF knows about that issue,
and makes sure the additional code is always executed. To be completely
safe from this issue (and others), we should always be using AS_IF instead
of plain if, but that seems like excessive caution given that this is the
first time we have trouble like this. Plain if-then is more readable than
AS_IF.
This should fix compilation with --disable-thread-safety, and hopefully the
buildfarm failure on forgmouth, related to mingw standard headers, too.
I backpatched the previous fixes to 9.5, but it's starting to look like
these changes are too fiddly to backpatch, so commit this to master only,
and revert all the pthread-related configure changes in 9.5.
On some Linux systems, "-lrt" exposed pthread-functions, so that linking
with -lrt was seemingly enough to make a program that uses pthreads to
work. However, when linking libpq, the dependency to libpthread was not
marked correctly, so that when an executable was linked with -lpq but
without -pthread, you got errors about undefined pthread_* functions from
libpq.
To fix, test for the flags required to use pthreads earlier in the autoconf
script, before checking any other libraries.
This should fix the failure on buildfarm member shearwater. gharial is also
failing; hopefully this fixes that too although the failure looks somewhat
different.
Our version was different from the upstream version in that we tried to use
all possible pthread-related flags that the compiler accepts, rather than
just the first one that works. That change was made in commit
e48322a6d6, to work-around a bug affecting GCC
versions 3.2 and below (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=8888),
although we didn't realize that it was a GCC bug at the time. We hardly care
about that old GCC versions anymore, so we no longer need that workaround.
This fixes the macro for compilers that print warnings with the chosen
flags. That's pretty annoying on its own right, but it also inconspicuously
disabled thread-safety, because we refused to use any pthread-related flags
if the compiler produced warnings. Max Filippov reported that problem when
linking with uClibc and OpenSSL. The warnings-check was added because the
workaround for the GCC bug caused warnings otherwise, so it's no longer
needed either. We can just use the upstream version as is.
If you really want to compile with GCC version 3.2 or older, you can still
work-around it manually by setting PTHREAD_CFLAGS="-pthread -lpthread"
manually on the configure command line.
Backpatch to 9.5. I don't want to unnecessarily rock the boat on stable
branches, but 9.5 seems like fair game.
Expose PG_VERSION_NUM (e.g., "90600") as a Make variable; but for
consistency with the other Make variables holding similar info,
call the variable just VERSION_NUM not PG_VERSION_NUM.
There was some discussion of making this value available as a pg_config
value as well. However, that would entail substantially more work than
this two-line patch. Given that there was not exactly universal consensus
that we need this at all, let's just do a minimal amount of work for now.
Michael Paquier, reviewed by Pavel Stehule
AC_TRY_COMPILE(...) -> AC_COMPILE_IFELSE([AC_LANG_PROGRAM(...)])
AC_TRY_LINK(...) -> AC_LINK_IFELSE([AC_LANG_PROGRAM(...)])
AC_TRY_RUN(...) -> AC_RUN_IFELSE([AC_LANG_PROGRAM(...)])
AC_LANG_SAVE/RESTORE -> AC_LANG_PUSH/POP
AC_DECL_SYS_SIGLIST -> AC_CHECK_DECLS(...) (per snippet in autoconf manual)
Also use AC_LANG_SOURCE instead of AC_LANG_PROGRAM, where the main()
function is not needed.
With these changes, autoconf -Wall doesn't complain anymore.
Andreas Karlsson
For building PL/Perl, PL/Python, and PL/Tcl, we need a shared library of
libperl, libpython, and libtcl, respectively. Previously, this was
checked in the makefiles, skipping the PL build with a warning if no
shared library was available. Now this is checked in configure, with an
error if no shared library is available.
The previous situation arose because in the olden days, the configure
options --with-perl, --with-python, and --with-tcl controlled whether
frontend interfaces for those languages would be built. The procedural
languages were added later, and shared libraries were often not
available in the beginning. So it was decided skip the builds of the
procedural languages in those cases. The frontend interfaces have since
been removed from the tree, and shared libraries are now available most
of the time, so that setup makes much less sense now.
Also, the new setup allows contrib modules and pgxs users to rely on the
respective PLs being available based on configure flags.
On gcc and clang, the _mm_crc32_u8 and _mm_crc32_u64 intrinsics are not
defined at all, when not building with -msse4.2. But on icc, they are.
So we cannot assume that if those intrinsics are defined, we can always use
them safely, we might still need the runtime check.
To fix, check if the __SSE_4_2__ preprocessor symbol is defined. That's
supposed to be defined only when the compiler is targeting a processor that
has SSE 4.2 support.
Per buildfarm members fulmar and okapi.
Modern x86 and x86-64 processors with SSE 4.2 support have special
instructions, crc32b and crc32q, for calculating CRC-32C. They greatly
speed up CRC calculation.
Whether the instructions can be used or not depends on the compiler and the
target architecture. If generation of SSE 4.2 instructions is allowed for
the target (-msse4.2 flag on gcc and clang), use them. If they are not
allowed by default, but the compiler supports the -msse4.2 flag to enable
them, compile just the CRC-32C function with -msse4.2 flag, and check at
runtime whether the processor we're running on supports it. If it doesn't,
fall back to the slicing-by-8 algorithm. (With the common defaults on
current operating systems, the runtime-check variant is what you get in
practice.)
Abhijit Menon-Sen, heavily modified by me, reviewed by Andres Freund.
Considering the number of cases in which "unused" command line arguments
are silently ignored by compilers, it's fairly astonishing that anybody
thought this warning was useful; it's certainly nothing but an annoyance
when building Postgres. One such case is that neither gcc nor clang
complain about unrecognized -Wno-foo switches, making it more difficult
to figure out whether the switch does anything than one could wish.
Back-patch to 9.3, which is as far back as the patch applies conveniently
(we'd have to back-patch PGAC_PROG_CC_VAR_OPT to go further, and it doesn't
seem worth that).
We will, for the foreseeable future, not expose 128 bit datatypes to
SQL. But being able to use 128bit math will allow us, in a later patch,
to use 128bit accumulators for some aggregates; leading to noticeable
speedups over using numeric.
So far we only detect a gcc/clang extension that supports 128bit math,
but no 128bit literals, and no *printf support. We might want to expand
this in the future to further compilers; if there are any that that
provide similar support.
Discussion: 544BB5F1.50709@proxel.se
Author: Andreas Karlsson, with significant editorializing by me
Reviewed-By: Peter Geoghegan, Oskari Saarenmaa
Since commit ba7c5975ad, port/dirmod.c
has contained only Windows-specific functions. Most platforms don't
seem to mind uselessly building an empty file, but OS X for one issues
warnings. Hence, treat dirmod.c as a Windows-specific file selected
by configure rather than one that's always built. We can revert this
change if dirmod.c ever gains any non-Windows functionality again.
Back-patch to 9.4 where the mentioned commit appeared.
This speeds up WAL generation and replay. The new algorithm is
significantly faster with large inputs, like full-page images or when
inserting wide rows. It is slower with tiny inputs, i.e. less than 10 bytes
or so, but the speedup with longer inputs more than make up for that. Even
small WAL records at least have 24 byte header in the front.
The output is identical to the current byte-at-a-time computation, so this
does not affect compatibility. The new algorithm is only used for the
CRC-32C variant, not the legacy version used in tsquery or the
"traditional" CRC-32 used in hstore and ltree. Those are not as performance
critical, and are usually only applied over small inputs, so it seems
better to not carry around the extra lookup tables to speed up those rare
cases.
Abhijit Menon-Sen
Previously, configure would add any switches that it chose of its own
accord to the end of the user-specified CFLAGS string. Since most
compilers process these left-to-right, this meant that configure's choices
would override the user-specified flags in case of conflicts. We'd rather
that worked the other way around, so adjust the logic to put the user's
string at the end not the beginning.
There does not seem to be a need for a similar behavior change for CPPFLAGS
or LDFLAGS: in those, the earlier switches tend to win (think -I or -L
behavior) so putting the user's string at the front is fine.
Backpatch to 9.4 but not earlier. I'm not planning to run buildfarm member
guar on older branches, and it seems a bit risky to change this behavior
in long-stable branches.