The interaction of these parameters was a bit confused/confusing,
and in fact v11 entirely misses the opportunity to apply partition
constraints when a partition is accessed directly (rather than
indirectly from its parent).
In HEAD, establish the principle that enable_partition_pruning controls
partition pruning and nothing else. When accessing a partition via its
parent, we do partition pruning (if enabled by enable_partition_pruning)
and then there is no need to consider partition constraints in the
constraint_exclusion logic. When accessing a partition directly, its
partition constraints are applied by the constraint_exclusion logic,
only if constraint_exclusion = on.
In v11, we can't have such a clean division of these GUCs' effects,
partly because we don't want to break compatibility too much in a
released branch, and partly because the clean coding requires
inheritance_planner to have applied partition pruning to a partitioned
target table, which it doesn't in v11. However, we can tweak things
enough to cover the missed case, which seems like a good idea since
it's potentially a performance regression from v10. This patch keeps
v11's previous behavior in which enable_partition_pruning overrides
constraint_exclusion for an inherited target table, though.
In HEAD, also teach relation_excluded_by_constraints that it's okay to use
inheritable constraints when trying to prune a traditional inheritance
tree. This might not be thought worthy of effort given that that feature
is semi-deprecated now, but we have enough infrastructure that it only
takes a couple more lines of code to do it correctly.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/9813f079-f16b-61c8-9ab7-4363cab28d80@lab.ntt.co.jp
Discussion: https://postgr.es/m/29069.1555970894@sss.pgh.pa.us
This fixes a couple of grammar mistakes, typos and inconsistencies in
the documentation. Particularly, the configuration parsing allows only
"kB" to mean kilobyte but there were references in the docs to "KB".
Some instances of the latter are still in the code comments. Some
parameter values were mentioned with "Minus-one", and using directly
"-1" with proper markups is more helpful to the reader.
Some of these have been pointed out by Justin, and some others are
things I bumped into.
Author: Justin Pryzby, Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20190330224333.GQ5815@telsasoft.com
Commit ca4103025d left a few loose ends. The most important one
(broken pg_dump output) is already fixed by virtue of commit
3b23552ad8, but some things remained:
* When ALTER TABLE rewrites tables, the indexes must remain in the
tablespace they were originally in. This didn't work because
index recreation during ALTER TABLE runs manufactured SQL (yuck),
which runs afoul of default_tablespace in competition with the parent
relation tablespace. To fix, reset default_tablespace to the empty
string temporarily, and add the TABLESPACE clause as appropriate.
* Setting a partitioned rel's tablespace to the database default is
confusing; if it worked, it would direct the partitions to that
tablespace regardless of default_tablespace. But in reality it does
not work, and making it work is a larger project. Therefore, throw
an error when this condition is detected, to alert the unwary.
Add some docs and tests, too.
Author: Álvaro Herrera
Discussion: https://postgr.es/m/CAKJS1f_1c260nOt_vBJ067AZ3JXptXVRohDVMLEBmudX1YEx-A@mail.gmail.com
Similarly to the set of parameters for keepalive, a connection parameter
for libpq is added as well as a backend GUC, called tcp_user_timeout.
Increasing the TCP user timeout is useful to allow a connection to
survive extended periods without end-to-end connection, and decreasing
it allows application to fail faster. By default, the parameter is 0,
which makes the connection use the system default, and follows a logic
close to the keepalive parameters in its handling. When connecting
through a Unix-socket domain, the parameters have no effect.
Author: Ryohei Nagaura
Reviewed-by: Fabien Coelho, Robert Haas, Kyotaro Horiguchi, Kirk
Jamison, Mikalai Keida, Takayuki Tsunakawa, Andrei Yahorau
Discussion: https://postgr.es/m/EDA4195584F5064680D8130B1CA91C45367328@G01JPEXMBYT04
This adds documentation about the user oriented parts of table access
methods (i.e. the default_table_access_method GUC and the USING clause
for CREATE TABLE etc), adds a basic chapter about the table access
method interface, and adds a note to storage.sgml that it's contents
don't necessarily apply for non-builtin AMs.
Author: Haribabu Kommi and Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
This is useful to obtain a view of the different transaction types in an
application, regardless of the durations of the statements each runs.
Author: Adrien Nayrat
Reviewed-by: Masahiko Sawada, Hayato Kuroda, Andres Freund
On at least ZFS, it can be beneficial to create new WAL files every
time and not to bother zero-filling them. Since it's not clear which
other filesystems might benefit from one or both of those things,
add individual GUCs to control those two behaviors independently and
make only very general statements in the docs.
Author: Jerry Jelinek, with some adjustments by Thomas Munro
Reviewed-by: Alvaro Herrera, Andres Freund, Tomas Vondra, Robert Haas and others
Discussion: https://postgr.es/m/CACPQ5Fo00QR7LNAcd1ZjgoBi4y97%2BK760YABs0vQHH5dLdkkMA%40mail.gmail.com
Historically guc.c has just refused examples like set work_mem = '30.1GB',
but it seems more useful for it to take that and round off the value to
some reasonable approximation of what the user said. Just rounding to
the parameter's native unit would work, but it would lead to rather
silly-looking settings, such as 31562138kB for this example. Instead
let's round to the nearest multiple of the next smaller unit (if any),
producing 30822MB.
Also, do the units conversion math in floating point and round to integer
(if needed) only at the end. This produces saner results for inputs that
aren't exact multiples of the parameter's native unit, and removes another
difference in the behavior for integer vs. float parameters.
In passing, document the ability to use hex or octal input where it
ought to be documented.
Discussion: https://postgr.es/m/1798.1552165479@sss.pgh.pa.us
This reverts commit bd09503e63.
Per discussion, it seems like what we should do instead is to
reduce the default value of autovacuum_vacuum_cost_delay by the
same factor. That's functionally equivalent as long as the
platform can accurately service the smaller delay request, which
should be true on anything released in the last 10 years or more.
And smaller, more-closely-spaced delays are better in terms of
providing a steady I/O load.
Discussion: https://postgr.es/m/28720.1552101086@sss.pgh.pa.us
This change makes it possible to specify sub-millisecond delays,
which work well on most modern platforms, though that was not true
when the cost-delay feature was designed.
To support this without breaking existing configuration entries,
improve guc.c to allow floating-point GUCs to have units. Also,
allow "us" (microseconds) as an input/output unit for time-unit GUCs.
(It's not allowed as a base unit, at least not yet.)
Likewise change the autovacuum_vacuum_cost_delay reloption to be
floating-point; this forces a catversion bump because the layout of
StdRdOptions changes.
This patch doesn't in itself change the default values or allowed
ranges for these parameters, and it should not affect the behavior
for any already-allowed setting for them.
Discussion: https://postgr.es/m/1798.1552165479@sss.pgh.pa.us
The original 200 default value was set back in f425b605f4 when the cost
delay settings were first added. Hardware has improved quite a bit since
then and we've also made improvements such as sorting buffers during
checkpoints (9cd00c457e) which should result in less random writes.
This low default value was reportedly causing problems with badly
configured servers and in the absence of a native method to remove
excessive bloat from tables without incurring an AccessExclusiveLock, this
often made cleaning up the damage caused by badly configured auto-vacuums
difficult.
It seems more likely that someone will notice that auto-vacuum is running
too quickly than too slowly, so let's go all out and multiple the default
value for the setting by 10. With the default vacuum_cost_page_dirty and
autovacuum_vacuum_cost_delay (assuming a page size of 8192 bytes), this
allows autovacuum a theoretical maximum dirty write rate of around 39MB/s
instead of just 3.9MB/s.
Author: David Rowley
Discussion: https://postgr.es/m/CAKJS1f_YbXC2qTMPyCbmsPiKvZYwpuQNQMohiRXLj1r=8_rYvw@mail.gmail.com
Reflecting an updated parameter value requires a server restart, which
was not mentioned in the documentation and in postgresql.conf.sample.
Reported-by: Thomas Poty
Discussion: https://postgr.es/m/15659-0cd812f13027a2d8@postgresql.org
By default, the fallback_application_name for a physical walreceiver
is "walreceiver". This means that multiple standbys cannot be
distinguished easily on a primary, for example in pg_stat_activity or
synchronous_standby_names.
If cluster_name is set, use that for fallback_application_name in the
walreceiver. (If it's not set, it remains "walreceiver".) If someone
set cluster_name to identify their instance, we might as well use that
by default to identify the node remotely as well. It's still possible
to specify another application_name in primary_conninfo explicitly.
Reviewed-by: Euler Taveira <euler@timbira.com.br>
Discussion: https://www.postgresql.org/message-id/flat/1257eaee-4874-e791-e83a-46720c72cac7@2ndquadrant.com
Previously, floating-point output was done by rounding to a specific
decimal precision; by default, to 6 or 15 decimal digits (losing
information) or as requested using extra_float_digits. Drivers that
wanted exact float values, and applications like pg_dump that must
preserve values exactly, set extra_float_digits=3 (or sometimes 2 for
historical reasons, though this isn't enough for float4).
Unfortunately, decimal rounded output is slow enough to become a
noticable bottleneck when dealing with large result sets or COPY of
large tables when many floating-point values are involved.
Floating-point output can be done much faster when the output is not
rounded to a specific decimal length, but rather is chosen as the
shortest decimal representation that is closer to the original float
value than to any other value representable in the same precision. The
recently published Ryu algorithm by Ulf Adams is both relatively
simple and remarkably fast.
Accordingly, change float4out/float8out to output shortest decimal
representations if extra_float_digits is greater than 0, and make that
the new default. Applications that need rounded output can set
extra_float_digits back to 0 or below, and take the resulting
performance hit.
We make one concession to portability for systems with buggy
floating-point input: we do not output decimal values that fall
exactly halfway between adjacent representable binary values (which
would rely on the reader doing round-to-nearest-even correctly). This
is known to be a problem at least for VS2013 on Windows.
Our version of the Ryu code originates from
https://github.com/ulfjack/ryu/ at commit c9c3fb1979, but with the
following (significant) modifications:
- Output format is changed to use fixed-point notation for small
exponents, as printf would, and also to use lowercase 'e', a
minimum of 2 exponent digits, and a mandatory sign on the exponent,
to keep the formatting as close as possible to previous output.
- The output of exact midpoint values is disabled as noted above.
- The integer fast-path code is changed somewhat (since we have
fixed-point output and the upstream did not).
- Our project style has been largely applied to the code with the
exception of C99 declaration-after-statement, which has been
retained as an exception to our present policy.
- Most of upstream's debugging and conditionals are removed, and we
use our own configure tests to determine things like uint128
availability.
Changing the float output format obviously affects a number of
regression tests. This patch uses an explicit setting of
extra_float_digits=0 for test output that is not expected to be
exactly reproducible (e.g. due to numerical instability or differing
algorithms for transcendental functions).
Conversions from floats to numeric are unchanged by this patch. These
may appear in index expressions and it is not yet clear whether any
change should be made, so that can be left for another day.
This patch assumes that the only supported floating point format is
now IEEE format, and the documentation is updated to reflect that.
Code by me, adapting the work of Ulf Adams and other contributors.
References:
https://dl.acm.org/citation.cfm?id=3192369
Reviewed-by: Tom Lane, Andres Freund, Donald Dong
Discussion: https://postgr.es/m/87r2el1bx6.fsf@news-spur.riddles.org.uk
Since its introduction, max_wal_senders is counted as part of
max_connections when it comes to define how many connection slots can be
used for replication connections with a WAL sender context. This can
lead to confusion for some users, as it could be possible to block a
base backup or replication from happening because other backend sessions
are already taken for other purposes by an application, and
superuser-only connection slots are not a correct solution to handle
that case.
This commit makes max_wal_senders independent of max_connections for its
handling of PGPROC entries in ProcGlobal, meaning that connection slots
for WAL senders are handled using their own free queue, like autovacuum
workers and bgworkers.
One compatibility issue that this change creates is that a standby now
requires to have a value of max_wal_senders at least equal to its
primary. So, if a standby created enforces the value of
max_wal_senders to be lower than that, then this could break failovers.
Normally this should not be an issue though, as any settings of a
standby are inherited from its primary as postgresql.conf gets normally
copied as part of a base backup, so parameters would be consistent.
Author: Alexander Kukushkin
Reviewed-by: Kyotaro Horiguchi, Petr Jelínek, Masahiko Sawada, Oleksii
Kliukin
Discussion: https://postgr.es/m/CAFh8B=nBzHQeYAu0b8fjK-AF1X4+_p6GRtwG+cCgs6Vci2uRuQ@mail.gmail.com
This value represents the default behavior of using the current
timeline. Previously, this was represented by an empty string.
(Before the removal of recovery.conf, this setting could not be chosen
explicitly but was used when recovery_target_timeline was not
mentioned at all.)
Discussion: https://www.postgresql.org/message-id/flat/6dd2c23a-4162-8469-410f-bfe146e28c0c@2ndquadrant.com/
Reviewed-by: David Steele <david@pgmasters.net>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
"$user" in a search_path string is replaced by CURRENT_USER not
SESSION_USER. (It actually was SESSION_USER in the initial implementation,
but we changed it shortly later, and evidently forgot to fix the docs to
match.)
Noted by antonov@stdpr.ru
Discussion: https://postgr.es/m/159151fb45d490c8d31ea9707e9ba99d@stdpr.ru
This allows to set a lower log_min_duration_statement value without
incurring excessive log traffic (which reduces performance). This can
be useful to analyze workloads with lots of short queries.
Author: Adrien Nayrat
Reviewed-by: David Rowley, Vik Fearing
Discussion: https://postgr.es/m/c30ee535-ee1e-db9f-fa97-146b9f62caed@anayrat.info
The previous recovery.conf regime accepted multiple recovery_target*
settings and used the last one. This does not translate well to the
general GUC system. Specifically, under EXEC_BACKEND, the settings
are written out not in any particular order, so the order in which
they were originally set is not available to new processes.
Rather than redesign the GUC system, it was decided to abandon the old
behavior and only allow one recovery target setting. A second setting
will cause an error. However, it is allowed to set the same parameter
multiple times or unset a parameter and set a different one.
Discussion: https://www.postgresql.org/message-id/flat/27802171543235530%40iva2-6ec8f0a6115e.qloud-c.yandex.net#701a59c837ad0bf8c244344aaf3ef5a4
recovery.conf settings are now set in postgresql.conf (or other GUC
sources). Currently, all the affected settings are PGC_POSTMASTER;
this could be refined in the future case by case.
Recovery is now initiated by a file recovery.signal. Standby mode is
initiated by a file standby.signal. The standby_mode setting is
gone. If a recovery.conf file is found, an error is issued.
The trigger_file setting has been renamed to promote_trigger_file as
part of the move.
The documentation chapter "Recovery Configuration" has been integrated
into "Server Configuration".
pg_basebackup -R now appends settings to postgresql.auto.conf and
creates a standby.signal file.
Author: Fujii Masao <masao.fujii@gmail.com>
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Abhijit Menon-Sen <ams@2ndquadrant.com>
Author: Sergei Kornilov <sk@zsrv.org>
Discussion: https://www.postgresql.org/message-id/flat/607741529606767@web3g.yandex.ru/
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
On some operating systems, it doesn't make sense to retry fsync(),
because dirty data cached by the kernel may have been dropped on
write-back failure. In that case the only remaining copy of the
data is in the WAL. A subsequent fsync() could appear to succeed,
but not have flushed the data. That means that a future checkpoint
could apparently complete successfully but have lost data.
Therefore, violently prevent any future checkpoint attempts by
panicking on the first fsync() failure. Note that we already
did the same for WAL data; this change extends that behavior to
non-temporary data files.
Provide a GUC data_sync_retry to control this new behavior, for
users of operating systems that don't eject dirty data, and possibly
forensic/testing uses. If it is set to on and the write-back error
was transient, a later checkpoint might genuinely succeed (on a
system that does not throw away buffers on failure); if the error is
permanent, later checkpoints will continue to fail. The GUC defaults
to off, meaning that we panic.
Back-patch to all supported releases.
There is still a narrow window for error-loss on some operating
systems: if the file is closed and later reopened and a write-back
error occurs in the intervening time, but the inode has the bad
luck to be evicted due to memory pressure before we reopen, we could
miss the error. A later patch will address that with a scheme
for keeping files with dirty data open at all times, but we judge
that to be too complicated to back-patch.
Author: Craig Ringer, with some adjustments by Thomas Munro
Reported-by: Craig Ringer
Reviewed-by: Robert Haas, Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/20180427222842.in2e4mibx45zdth5%40alap3.anarazel.de
Previously it was possible to set client_min_messages to FATAL or PANIC,
which had the effect of suppressing transmission of regular ERROR messages
to the client. Perhaps that seemed like a useful option in the past, but
the trouble with it is that it breaks guarantees that are explicitly made
in our FE/BE protocol spec about how a query cycle can end. While libpq
and psql manage to cope with the omission, that's mostly because they
are not very bright; client libraries that have more semantic knowledge
are likely to get confused. Notably, pgODBC doesn't behave very sanely.
Let's fix this by getting rid of the ability to set client_min_messages
above ERROR.
In HEAD, just remove the FATAL and PANIC options from the set of allowed
enum values for client_min_messages. (This change also affects
trace_recovery_messages, but that's OK since these aren't useful values
for that variable either.)
In the back branches, there was concern that rejecting these values might
break applications that are explicitly setting things that way. I'm
pretty skeptical of that argument, but accommodate it by accepting these
values and then internally setting the variable to ERROR anyway.
In all branches, this allows a couple of tiny simplifications in the
logic in elog.c, so do that.
Also respond to the point that was made that client_min_messages has
exactly nothing to do with the server's logging behavior, and therefore
does not belong in the "When To Log" subsection of the documentation.
The "Statement Behavior" subsection is a better match, so move it there.
Jonah Harris and Tom Lane
Discussion: https://postgr.es/m/7809.1541521180@sss.pgh.pa.us
Discussion: https://postgr.es/m/15479-ef0f4cc2fd995ca2@postgresql.org
Being able to use a value that can be changed on a connection basis is
useful with clusters distributed geographically, and makes failure
detection more flexible. A note is added in the documentation about the
use of "options" in primary_conninfo, which can be hard to grasp for
newcomers with the need of two single quotes when listing a set of
parameters.
Author: Tsunakawa Takayuki
Reviewed-by: Masahiko Sawada, Michael Paquier
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1FAAD3AE@G01JPEXMBYT05
Per discussion, JIT isn't quite mature enough to ship enabled-by-default.
I failed to resist the temptation to do a bunch of copy-editing on the
related documentation. Also, clean up some inconsistencies in which
section of config.sgml the JIT GUCs are documented in vs. what guc.c
and postgresql.config.sample had.
Discussion: https://postgr.es/m/20180914222657.mw25esrzbcnu6qlu@alap3.anarazel.de
This allows querying the SSL implementation used on the server side.
It's analogous to using PQsslAttribute(conn, "library") in libpq.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
PostgreSQL nowadays offers some kind of dynamic shared memory feature on
all supported platforms. Having the choice of "none" prevents us from
relying on DSM in core features. So this patch removes the choice of
"none".
Author: Kyotaro Horiguchi <horiguchi.kyotaro@lab.ntt.co.jp>
Upper limits for vacuum_cleanup_index_scale_factor GUC and reloption
were initially set to 100.0 in 857f9c36. However, after further
discussion, it appears that some users like to disable B-tree cleanup
index scan completely (assuming there are no deleted pages).
vacuum_cleanup_index_scale_factor is used barely to protect against
stalled index statistics. And after detailed consideration it appears
that risk of stalled index statistics is low. And it would be nice to
allow advanced users setting higher values of
vacuum_cleanup_index_scale_factor. So, set upper limit for these
GUC and reloption to DBL_MAX.
Author: Alexander Korotkov
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/CAC8Q8tJCb%3DgxhzcV7T6ctx7PY-Ux1oA-AsTJc6cAVNsQiYcCzA%40mail.gmail.com
vacuum_cleanup_index_scale_factor was located in autovacuum group of
GUCs. However, it affects not only autovacuum, but also manually run
VACUUM. It appears that "client connection defaults" group of GUCs
is more appropriate for vacuum_cleanup_index_scale_factor, because
vacuum_*_age options are already located there.
Also, vacuum_cleanup_index_scale_factor was missed in
postgresql.conf.sample. So, add it there with appropriate comment.
Author: Masahiko Sawada with minor editorization by me
Discussion: https://postgr.es/m/CAD21AoArsoXMLKudXSKN679FRzs6oubEchM53bHwn8Tp%3D2boNg%40mail.gmail.com
Explain partition pruning more thoroughly, in a section above the one
that explains constraint exclusion, since the new feature is the one
that will be used more extensively from now on. Move some of the
material from the constraint exclusion subsection to the one on
partition pruning, so that we can explain the legacy method by
explaining the differences with the new one instead of repeating it.
Author: David Rowley, Álvaro Herrera
Reviewed-by: Amit Langote, David G. Johnston, Justin Pryzby
Discussion: https://postgr.es/m/CAKJS1f8PECxEi1YQ9nhVtshtfOMHUzAMm_Zp4gGCOCnMPjEKJA@mail.gmail.com
- Change vacuum_cleanup_index_scale_factor GUC to PGC_USERSET.
vacuum_cleanup_index_scale_factor GUC was defined as PGC_SIGHUP. But this
GUC affects not only autovacuum. So it might be useful to change it from user
session in order to influence manually runned VACUUM.
- Add missing tab-complete support for vacuum_cleanup_index_scale_factor
reloption.
- Fix condition for B-tree index cleanup.
Zero value of vacuum_cleanup_index_scale_factor means that user wants B-tree
index cleanup to be never skipped.
- Documentation and comment improvements
Authors: Justin Pryzby, Alexander Korotkov, Liudmila Mantrova
Reviewed by: all authors and Robert Haas
Discussion: https://www.postgresql.org/message-id/flat/20180502023025.GD7631%40telsasoft.com
There shouldn't be a line break between two adjacent tags, because that
will appear as whitespace in the output. (The rendering engine might in
turn collapse that whitespace away, so it might not actually make a
difference, but it's more correct this way.)
This controls both plan-time and execution-time new-style partition
pruning. While finer-grain control is possible (maybe using an enum GUC
instead of boolean), there doesn't seem to be much need for that.
This new parameter controls partition pruning for all queries:
trivially, SELECT queries that affect partitioned tables are naturally
under its control since they are using the new technology. However,
while UPDATE/DELETE queries do not use the new code, we make the new GUC
control their behavior also (stealing control from
constraint_exclusion), because it is more natural, and it leads to a
more natural transition to the future in which those queries will also
use the new pruning code.
Constraint exclusion still controls pruning for regular inheritance
situations (those not involving partitioned tables).
Author: David Rowley
Review: Amit Langote, Ashutosh Bapat, Justin Pryzby, David G. Johnston
Discussion: https://postgr.es/m/CAKJS1f_0HwsxJG9m+nzU+CizxSdGtfe6iF_ykPYBiYft302DCw@mail.gmail.com
Allow the cluster to be optionally init'd with read access for the
group.
This means a relatively non-privileged user can perform a backup of the
cluster without requiring write privileges, which enhances security.
The mode of PGDATA is used to determine whether group permissions are
enabled for directory and file creates. This method was chosen as it's
simple and works well for the various utilities that write into PGDATA.
Changing the mode of PGDATA manually will not automatically change the
mode of all the files contained therein. If the user would like to
enable group access on an existing cluster then changing the mode of all
the existing files will be required. Note that pg_upgrade will
automatically change the mode of all migrated files if the new cluster
is init'd with the -g option.
Tests are included for the backend and all the utilities which operate
on the PG data directory to ensure that the correct mode is set based on
the data directory permissions.
Author: David Steele <david@pgmasters.net>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
Vacuum of index consists from two stages: multiple (zero of more) ambulkdelete
calls and one amvacuumcleanup call. When workload on particular table
is append-only, then autovacuum isn't intended to touch this table. However,
user may run vacuum manually in order to fill visibility map and get benefits
of index-only scans. Then ambulkdelete wouldn't be called for indexes
of such table (because no heap tuples were deleted), only amvacuumcleanup would
be called In this case, amvacuumcleanup would perform full index scan for
two objectives: put recyclable pages into free space map and update index
statistics.
This patch allows btvacuumclanup to skip full index scan when two conditions
are satisfied: no pages are going to be put into free space map and index
statistics isn't stalled. In order to check first condition, we store
oldest btpo_xact in the meta-page. When it's precedes RecentGlobalXmin, then
there are some recyclable pages. In order to check second condition we store
number of heap tuples observed during previous full index scan by cleanup.
If fraction of newly inserted tuples is less than
vacuum_cleanup_index_scale_factor, then statistics isn't considered to be
stalled. vacuum_cleanup_index_scale_factor can be defined as both reloption and GUC (default).
This patch bumps B-tree meta-page version. Upgrade of meta-page is performed
"on the fly": during VACUUM meta-page is rewritten with new version. No special
handling in pg_upgrade is required.
Author: Masahiko Sawada, Alexander Korotkov
Review by: Peter Geoghegan, Kyotaro Horiguchi, Alexander Korotkov, Yura Sokolov
Discussion: https://www.postgresql.org/message-id/flat/CAD21AoAX+d2oD_nrd9O2YkpzHaFr=uQeGr9s1rKC3O4ENc568g@mail.gmail.com
As promised in earlier commits, this adds documentation about the new
build options, the new GUCs, about the planner logic when JIT is used,
and the benefits of JIT in general.
Also adds a more implementation oriented README.
I'm sure we're going to want to expand this further, but I think this
is a reasonable start.
Author: Andres Freund, with contributions by Thomas Munro
Reviewed-By: Thomas Munro
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
If the partition keys of input relation are part of the GROUP BY
clause, all the rows belonging to a given group come from a single
partition. This allows aggregation/grouping over a partitioned
relation to be broken down * into aggregation/grouping on each
partition. This should be no worse, and often better, than the normal
approach.
If the GROUP BY clause does not contain all the partition keys, we can
still perform partial aggregation for each partition and then finalize
aggregation after appending the partial results. This is less certain
to be a win, but it's still useful.
Jeevan Chalke, Ashutosh Bapat, Robert Haas. The larger patch series
of which this patch is a part was also reviewed and tested by Antonin
Houska, Rajkumar Raghuwanshi, David Rowley, Dilip Kumar, Konstantin
Knizhnik, Pascal Legrand, and Rafia Sabih.
Discussion: http://postgr.es/m/CAM2+6=V64_xhstVHie0Rz=KPEQnLJMZt_e314P0jaT_oJ9MR8A@mail.gmail.com
This allows specifying an external command for prompting for or
otherwise obtaining passphrases for SSL key files. This is useful
because in many cases there is no TTY easily available during service
startup.
Also add a setting ssl_passphrase_command_supports_reload, which allows
supporting SSL configuration reload even if SSL files need passphrases.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
We were independently checking ReservedBackends < MaxConnections and
max_wal_senders < MaxConnections, but because walsenders aren't allowed
to use superuser-reserved connections, that's really the wrong thing.
Correct behavior is to insist on ReservedBackends + max_wal_senders being
less than MaxConnections. Fix the code and associated documentation.
This has been wrong for a long time, but since the situation probably
hardly ever arises in the field (especially pre-v10, when the default
for max_wal_senders was zero), no back-patch.
Discussion: https://postgr.es/m/28271.1520195491@sss.pgh.pa.us
In PostgreSQL 9.5, the documentation for pg_stat_replication was moved,
so some of the links pointed to an appropriate location.
Author: Maksim Milyutin <milyutinma@gmail.com>
The ability to create like-named objects in different schemas opens up
the potential for users to change the behavior of other users' queries,
maliciously or accidentally. When you connect to a PostgreSQL server,
you should remove from your search_path any schema for which a user
other than yourself or superusers holds the CREATE privilege. If you do
not, other users holding CREATE privilege can redefine the behavior of
your commands, causing them to perform arbitrary SQL statements under
your identity. "SET search_path = ..." and "SELECT
pg_catalog.set_config(...)" are not vulnerable to such hijacking, so one
can use either as the first command of a session. As special
exceptions, the following client applications behave as documented
regardless of search_path settings and schema privileges: clusterdb
createdb createlang createuser dropdb droplang dropuser ecpg (not
programs it generates) initdb oid2name pg_archivecleanup pg_basebackup
pg_config pg_controldata pg_ctl pg_dump pg_dumpall pg_isready
pg_receivewal pg_recvlogical pg_resetwal pg_restore pg_rewind pg_standby
pg_test_fsync pg_test_timing pg_upgrade pg_waldump reindexdb vacuumdb
vacuumlo. Not included are core client programs that run user-specified
SQL commands, namely psql and pgbench. PostgreSQL encourages non-core
client applications to do likewise.
Document this in the context of libpq connections, psql connections,
dblink connections, ECPG connections, extension packaging, and schema
usage patterns. The principal defense for applications is "SELECT
pg_catalog.set_config('search_path', '', false)", and the principal
defense for databases is "REVOKE CREATE ON SCHEMA public FROM PUBLIC".
Either one is sufficient to prevent attack. After a REVOKE, consider
auditing the public schema for objects named like pg_catalog objects.
Authors of SECURITY DEFINER functions use some of the same defenses, and
the CREATE FUNCTION reference page already covered them thoroughly.
This is a good opportunity to audit SECURITY DEFINER functions for
robust security practice.
Back-patch to 9.3 (all supported versions).
Reviewed by Michael Paquier and Jonathan S. Katz. Reported by Arseniy
Sharoglazov.
Security: CVE-2018-1058
To make this work, tuplesort.c and logtape.c must also support
parallelism, so this patch adds that infrastructure and then applies
it to the particular case of parallel btree index builds. Testing
to date shows that this can often be 2-3x faster than a serial
index build.
The model for deciding how many workers to use is fairly primitive
at present, but it's better than not having the feature. We can
refine it as we get more experience.
Peter Geoghegan with some help from Rushabh Lathia. While Heikki
Linnakangas is not an author of this patch, he wrote other patches
without which this feature would not have been possible, and
therefore the release notes should possibly credit him as an author
of this feature. Reviewed by Claudio Freire, Heikki Linnakangas,
Thomas Munro, Tels, Amit Kapila, me.
Discussion: http://postgr.es/m/CAM3SWZQKM=Pzc=CAHzRixKjp2eO5Q0Jg1SoFQqeXFQ647JiwqQ@mail.gmail.com
Discussion: http://postgr.es/m/CAH2-Wz=AxWqDoVvGU7dq856S4r6sJAj6DBn7VMtigkB33N5eyg@mail.gmail.com
Previously, the docs implied that only Linux and Windows could use huge
pages. That's not quite true: it's just that we only know how to
request them explicitly on those OSes. Be more explicit about what
huge_pages really does and mention that some OSes may use huge pages
automatically.
Author: Thomas Munro and Catalin Iacob
Reviewed-By: Justin Pryzby, Peter Eisentraut
Discussion: https://postgr.es/m/CAEepm=3qzR-hfjepymohuC4XO5phxoSoipOjm6BEhnJHjNR+jg@mail.gmail.com
Split the "Authentication and Security" section into two separate
sections "Authentication" and "SSL". The latter part has gotten much
longer over time, and doesn't primarily have to do with authentication.
Also, the row_security parameter was inconsistently categorized, so
clean that up while we're here.
Add support for huge pages (called large pages on Windows) to the
Windows build.
This (probably) breaks compatibility with Windows versions prior to
Windows 2003 or Windows Vista.
Authors: Takayuki Tsunakawa and Thomas Munro
Reviewed by: Magnus Hagander, Amit Kapila
Introduce parallel-aware hash joins that appear in EXPLAIN plans as Parallel
Hash Join with Parallel Hash. While hash joins could already appear in
parallel queries, they were previously always parallel-oblivious and had a
partial subplan only on the outer side, meaning that the work of the inner
subplan was duplicated in every worker.
After this commit, the planner will consider using a partial subplan on the
inner side too, using the Parallel Hash node to divide the work over the
available CPU cores and combine its results in shared memory. If the join
needs to be split into multiple batches in order to respect work_mem, then
workers process different batches as much as possible and then work together
on the remaining batches.
The advantages of a parallel-aware hash join over a parallel-oblivious hash
join used in a parallel query are that it:
* avoids wasting memory on duplicated hash tables
* avoids wasting disk space on duplicated batch files
* divides the work of building the hash table over the CPUs
One disadvantage is that there is some communication between the participating
CPUs which might outweigh the benefits of parallelism in the case of small
hash tables. This is avoided by the planner's existing reluctance to supply
partial plans for small scans, but it may be necessary to estimate
synchronization costs in future if that situation changes. Another is that
outer batch 0 must be written to disk if multiple batches are required.
A potential future advantage of parallel-aware hash joins is that right and
full outer joins could be supported, since there is a single set of matched
bits for each hashtable, but that is not yet implemented.
A new GUC enable_parallel_hash is defined to control the feature, defaulting
to on.
Author: Thomas Munro
Reviewed-By: Andres Freund, Robert Haas
Tested-By: Rafia Sabih, Prabhat Sahu
Discussion:
https://postgr.es/m/CAEepm=2W=cOkiZxcg6qiFQP-dHUe09aqTrEMM7yJDrHMhDv_RA@mail.gmail.comhttps://postgr.es/m/CAEepm=37HKyJ4U6XOLi=JgfSHM3o6B-GaeO-6hkOmneTDkH+Uw@mail.gmail.com
When we create an Append node, we can spread out the workers over the
subplans instead of piling on to each subplan one at a time, which
should typically be a bit more efficient, both because the startup
cost of any plan executed entirely by one worker is paid only once and
also because of reduced contention. We can also construct Append
plans using a mix of partial and non-partial subplans, which may allow
for parallelism in places that otherwise couldn't support it.
Unfortunately, this patch doesn't handle the important case of
parallelizing UNION ALL by running each branch in a separate worker;
the executor infrastructure is added here, but more planner work is
needed.
Amit Khandekar, Robert Haas, Amul Sul, reviewed and tested by
Ashutosh Bapat, Amit Langote, Rafia Sabih, Amit Kapila, and
Rajkumar Raghuwanshi.
Discussion: http://postgr.es/m/CAJ3gD9dy0K_E8r727heqXoBmWZ83HwLFwdcaSSmBQ1+S+vRuUQ@mail.gmail.com
Hopefully, the additional logging will help avoid confusion that
could otherwise result.
Nathan Bossart, reviewed by Michael Paquier, Fabrízio Mello, and me
Since some preparation work had already been done, the only source
changes left were changing empty-element tags like <xref linkend="foo">
to <xref linkend="foo"/>, and changing the DOCTYPE.
The source files are still named *.sgml, but they are actually XML files
now. Renaming could be considered later.
In the build system, the intermediate step to convert from SGML to XML
is removed. Everything is build straight from the source files again.
The OpenSP (or the old SP) package is no longer needed.
The documentation toolchain instructions are updated and are much
simpler now.
Peter Eisentraut, Alexander Lakhin, Jürgen Purtz
wal_receiver_timeout, wal_receiver_status_interval and
wal_retrieve_retry_interval configuration parameters affect the logical rep
worker, but previously only wal_receiver_status_interval was not mentioned
as such parameter in the doc.
Back-patch to v10 where logical rep was added.
Author: Masahiko Sawada
Discussion: https://www.postgresql.org/message-id/CAD21AoBUnuH_UsnKXyPCsCR7EAMamW0sSb6a7=WgiQRpnMAp5w@mail.gmail.com
Commit 5ecc0d738 removed the hard-wired superuser checks in lo_import
and lo_export in favor of protecting them with SQL permissions, but
failed to adjust the documentation to match. Fix that, and add a
<caution> paragraph pointing out the nontrivial security hazards
involved with actually granting such permissions. (It's still better
than ALLOW_DANGEROUS_LO_FUNCTIONS, though.)
Also, commit ae20b23a9 caused large object read/write privilege to
be checked during lo_open() rather than in the actual read or write
calls. Document that.
Discussion: https://postgr.es/m/CAB7nPqRHmNOYbETnc_2EjsuzSM00Z+BWKv9sy6tnvSd5gWT_JA@mail.gmail.com
IDs in SGML are case insensitive, and we have accumulated a mix of upper
and lower case IDs, including different variants of the same ID. In
XML, these will be case sensitive, so we need to fix up those
differences. Going to all lower case seems most straightforward, and
the current build process already makes all anchors and lower case
anyway during the SGML->XML conversion, so this doesn't create any
difference in the output right now. A future XML-only build process
would, however, maintain any mixed case ID spellings in the output, so
that is another reason to clean this up beforehand.
Author: Alexander Lakhin <exclusion@gmail.com>
For DocBook XML compatibility, don't use SGML empty tags (</>) anymore,
replace by the full tag name. Add a warning option to catch future
occurrences.
Alexander Lakhin, Jürgen Purtz
Instead of joining two partitioned tables in their entirety we can, if
it is an equi-join on the partition keys, join the matching partitions
individually. This involves teaching the planner about "other join"
rels, which are related to regular join rels in the same way that
other member rels are related to baserels. This can use significantly
more CPU time and memory than regular join planning, because there may
now be a set of "other" rels not only for every base relation but also
for every join relation. In most practical cases, this probably
shouldn't be a problem, because (1) it's probably unusual to join many
tables each with many partitions using the partition keys for all
joins and (2) if you do that scenario then you probably have a big
enough machine to handle the increased memory cost of planning and (3)
the resulting plan is highly likely to be better, so what you spend in
planning you'll make up on the execution side. All the same, for now,
turn this feature off by default.
Currently, we can only perform joins between two tables whose
partitioning schemes are absolutely identical. It would be nice to
cope with other scenarios, such as extra partitions on one side or the
other with no match on the other side, but that will have to wait for
a future patch.
Ashutosh Bapat, reviewed and tested by Rajkumar Raghuwanshi, Amit
Langote, Rafia Sabih, Thomas Munro, Dilip Kumar, Antonin Houska, Amit
Khandekar, and by me. A few final adjustments by me.
Discussion: http://postgr.es/m/CAFjFpRfQ8GrQvzp3jA2wnLqrHmaXna-urjm_UY9BqXj=EaDTSA@mail.gmail.com
Discussion: http://postgr.es/m/CAFjFpRcitjfrULr5jfuKWRPsGUX0LQ0k8-yG0Qw2+1LBGNpMdw@mail.gmail.com
At the time replacement_sort_tuples was introduced, there were still
cases where replacement selection sort noticeably outperformed using
quicksort even for the first run. However, those cases seem to have
evaporated as a result of further improvements made since that time
(and perhaps also advances in CPU technology). So remove replacement
selection and the controlling GUC entirely. This makes tuplesort.c
noticeably simpler and probably paves the way for further
optimizations someone might want to do later.
Peter Geoghegan, with review and testing by Tomas Vondra and me.
Discussion: https://postgr.es/m/CAH2-WzmmNjG_K0R9nqYwMq3zjyJJK+hCbiZYNGhAy-Zyjs64GQ@mail.gmail.com
Explain more about how the different password authentication methods and
the password_encryption settings relate to each other, give some
upgrading advice, and set a better link from the release notes.
Reviewed-by: Jeff Janes <jeff.janes@gmail.com>
Commit a445cb92ef removed the default file
names for server-side CRL and CA files, but left them in the docs with a
small note. This removes the note and the previous default names to
clarify, as well as changes mentions of the file names to make it
clearer that they are configurable.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Many places that mentioned only Gather should also mention Gather
Merge, or should be phrased in a more neutral way. Be more clear
about the fact that max_parallel_workers_per_gather affects the number
of workers the planner may want to use. Fix a typo. Explain how
Gather Merge works. Adjust wording around parallel scans to be a bit
more clear. Adjust wording around parallel-restricted operations for
the fact that uncorrelated subplans are no longer restricted.
Patch by me, reviewed by Erik Rijkers
Discussion: http://postgr.es/m/CA+TgmoZsTjgVGn=ei5ht-1qGFKy_m1VgB3d8+Rg304hz91N5ww@mail.gmail.com
1024 bits is considered weak these days, but OpenSSL always passes 1024 as
the key length to the tmp_dh callback. All the code to handle other key
lengths is, in fact, dead.
To remedy those issues:
* Only include hard-coded 2048-bit parameters.
* Set the parameters directly with SSL_CTX_set_tmp_dh(), without the
callback
* The name of the file containing the DH parameters is now a GUC. This
replaces the old hardcoded "dh1024.pem" filename. (The files for other
key lengths, dh512.pem, dh2048.pem, etc. were never actually used.)
This is not a new problem, but it doesn't seem worth the risk and churn to
backport. If you care enough about the strength of the DH parameters on
old versions, you can create custom DH parameters, with as many bits as you
wish, and put them in the "dh1024.pem" file.
Per report by Nicolas Guini and Damian Quiroga. Reviewed by Michael Paquier.
Discussion: https://www.postgresql.org/message-id/CAMxBoUyjOOautVozN6ofzym828aNrDjuCcOTcCquxjwS-L2hGQ@mail.gmail.com
Update the documentation a bit to include that logical replication as
well as other and third-party replication clients can participate in
synchronous replication.
Buildfarm evidence shows that TCP_KEEPALIVE_THRESHOLD doesn't exist
after all on Solaris < 11. This means we need to take positive action to
prevent the TCP_KEEPALIVE code path from being taken on that platform.
I've chosen to limit it with "&& defined(__darwin__)", since it's unclear
that anyone else would follow Apple's precedent of spelling the symbol
that way.
Also, follow a suggestion from Michael Paquier of eliminating code
duplication by defining a couple of intermediate symbols for the
socket option.
In passing, make some effort to reduce the number of translatable messages
by replacing "setsockopt(foo) failed" with "setsockopt(%s) failed", etc,
throughout the affected files. And update relevant documentation so
that it doesn't claim to provide an exhaustive list of the possible
socket option names.
Like the previous commit (f0256c774), back-patch to all supported branches.
Discussion: https://postgr.es/m/20170627163757.25161.528@wrigleys.postgresql.org
Storing passwords in plaintext hasn't been a good idea for a very long
time, if ever. Now seems like a good time to finally forbid it, since we're
messing with this in PostgreSQL 10 anyway.
Remove the CREATE/ALTER USER UNENCRYPTED PASSSWORD 'foo' syntax, since
storing passwords unencrypted is no longer supported. ENCRYPTED PASSWORD
'foo' is still accepted, but ENCRYPTED is now just a noise-word, it does
the same as just PASSWORD 'foo'.
Likewise, remove the --unencrypted option from createuser, but accept
--encrypted as a no-op for backward compatibility. AFAICS, --encrypted was
a no-op even before this patch, because createuser encrypted the password
before sending it to the server even if --encrypted was not specified. It
added the ENCRYPTED keyword to the SQL command, but since the password was
already in encrypted form, it didn't make any difference. The documentation
was not clear on whether that was intended or not, but it's moot now.
Also, while password_encryption='on' is still accepted as an alias for
'md5', it is now marked as hidden, so that it is not listed as an accepted
value in error hints, for example. That's not directly related to removing
'plain', but it seems better this way.
Reviewed by Michael Paquier
Discussion: https://www.postgresql.org/message-id/16e9b768-fd78-0b12-cfc1-7b6b7f238fde@iki.fi
This goes together with the changes made to enable replication on the
sending side by default (wal_level, max_wal_senders etc) by making the
receiving stadby node also enable it by default.
Huong Dangminh
Per discussion, plain "scram" is confusing because we actually implement
SCRAM-SHA-256 rather than the original SCRAM that uses SHA-1 as the hash
algorithm. If we add support for SCRAM-SHA-512 or some other mechanism in
the SCRAM family in the future, that would become even more confusing.
Most of the internal files and functions still use just "scram" as a
shorthand for SCRMA-SHA-256, but I did change PASSWORD_TYPE_SCRAM to
PASSWORD_TYPE_SCRAM_SHA_256, as that could potentially be used by 3rd
party extensions that hook into the password-check hook.
Michael Paquier did this in an earlier version of the SCRAM patch set
already, but I didn't include that in the version that was committed.
Discussion: https://www.postgresql.org/message-id/fde71ff1-5858-90c8-99a9-1c2427e7bafb@iki.fi
Defaults match the fixed behavior of prior releases, but now DBAs
have better options to tune serializable workloads.
It might be nice to be able to set this per relation, but that part
will need to wait for another release.
Author: Dagfinn Ilmari Mannsåker
The previous default 'pg_log' might have indicated by its "pg_" prefix
that it is an internal system directory. The new default is more in
line with the typical naming of directories with user-facing log files.
Together with the renaming of pg_clog and pg_xlog, this should clear up
that difference.
Author: Andreas Karlsson <andreas@proxel.se>
Add functionality for a new subscription to copy the initial data in the
tables and then sync with the ongoing apply process.
For the copying, add a new internal COPY option to have the COPY source
data provided by a callback function. The initial data copy works on
the subscriber by receiving COPY data from the publisher and then
providing it locally into a COPY that writes to the destination table.
A WAL receiver can now execute full SQL commands. This is used here to
obtain information about tables and publications.
Several new options were added to CREATE and ALTER SUBSCRIPTION to
control whether and when initial table syncing happens.
Change pg_dump option --no-create-subscription-slots to
--no-subscription-connect and use the new CREATE SUBSCRIPTION
... NOCONNECT option for that.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Tested-by: Erik Rijkers <er@xs4all.nl>
The warning about hash indexes not being write-ahead logged and their
use being discouraged has been removed. "snapshot too old" is now
supported for tables with hash indexes. Most importantly, barring
bugs, hash indexes will now be crash-safe and usable on standbys.
This commit doesn't yet add WAL consistency checking for hash
indexes, as we now have for other index types; a separate patch has
been submitted to cure that lack.
Amit Kapila, reviewed and slightly modified by me. The larger patch
series of which this is a part has been reviewed and tested by Álvaro
Herrera, Ashutosh Sharma, Mark Kirkwood, Jeff Janes, and Jesper
Pedersen.
Discussion: http://postgr.es/m/CAA4eK1JOBX=YU33631Qh-XivYXtPSALh514+jR8XeD7v+K3r_Q@mail.gmail.com
Like Gather, we spawn multiple workers and run the same plan in each
one; however, Gather Merge is used when each worker produces the same
output ordering and we want to preserve that output ordering while
merging together the streams of tuples from various workers. (In a
way, Gather Merge is like a hybrid of Gather and MergeAppend.)
This works out to a win if it saves us from having to perform an
expensive Sort. In cases where only a small amount of data would need
to be sorted, it may actually be faster to use a regular Gather node
and then sort the results afterward, because Gather Merge sometimes
needs to wait synchronously for tuples whereas a pure Gather generally
doesn't. But if this avoids an expensive sort then it's a win.
Rushabh Lathia, reviewed and tested by Amit Kapila, Thomas Munro,
and Neha Sharma, and reviewed and revised by me.
Discussion: http://postgr.es/m/CAGPqQf09oPX-cQRpBKS0Gq49Z+m6KBxgxd_p9gX8CKk_d75HoQ@mail.gmail.com
This introduces a new generic SASL authentication method, similar to the
GSS and SSPI methods. The server first tells the client which SASL
authentication mechanism to use, and then the mechanism-specific SASL
messages are exchanged in AuthenticationSASLcontinue and PasswordMessage
messages. Only SCRAM-SHA-256 is supported at the moment, but this allows
adding more SASL mechanisms in the future, without changing the overall
protocol.
Support for channel binding, aka SCRAM-SHA-256-PLUS is left for later.
The SASLPrep algorithm, for pre-processing the password, is not yet
implemented. That could cause trouble, if you use a password with
non-ASCII characters, and a client library that does implement SASLprep.
That will hopefully be added later.
Authorization identities, as specified in the SCRAM-SHA-256 specification,
are ignored. SET SESSION AUTHORIZATION provides more or less the same
functionality, anyway.
If a user doesn't exist, perform a "mock" authentication, by constructing
an authentic-looking challenge on the fly. The challenge is derived from
a new system-wide random value, "mock authentication nonce", which is
created at initdb, and stored in the control file. We go through these
motions, in order to not give away the information on whether the user
exists, to unauthenticated users.
Bumps PG_CONTROL_VERSION, because of the new field in control file.
Patch by Michael Paquier and Heikki Linnakangas, reviewed at different
stages by Robert Haas, Stephen Frost, David Steele, Aleksander Alekseev,
and many others.
Discussion: https://www.postgresql.org/message-id/CAB7nPqRbR3GmFYdedCAhzukfKrgBLTLtMvENOmPrVWREsZkF8g%40mail.gmail.com
Discussion: https://www.postgresql.org/message-id/CAB7nPqSMXU35g%3DW9X74HVeQp0uvgJxvYOuA4A-A3M%2B0wfEBv-w%40mail.gmail.com
Discussion: https://www.postgresql.org/message-id/55192AFE.6080106@iki.fi
The syslogger will write out the current stderr and csvlog names, if
it's running and there are any, to a new file in the data directory
called "current_logfiles". We take care to remove this file when it
might no longer be valid (but not at shutdown). The function
pg_current_logfile() can be used to read the entries in the file.
Gilles Darold, reviewed and modified by Karl O. Pinc, Michael
Paquier, and me. Further review by Álvaro Herrera and Christoph Berg.
Per discussion, the time has come to do this. The handwriting has been
on the wall at least since 9.0 that this would happen someday, whenever
it got to be too much of a burden to support the float-timestamp option.
The triggering factor now is the discovery that there are multiple bugs
in the code that attempts to implement use of integer timestamps in the
replication protocol even when the server is built for float timestamps.
The internal float timestamps leak into the protocol fields in places.
While we could fix the identified bugs, there's a very high risk of
introducing more. Trying to build a wall that would positively prevent
mixing integer and float timestamps is more complexity than we want to
undertake to maintain a long-deprecated option. The fact that these
bugs weren't found through testing also indicates a lack of interest
in float timestamps.
This commit disables configure's --disable-integer-datetimes switch
(it'll still accept --enable-integer-datetimes, though), removes direct
references to USE_INTEGER_DATETIMES, and removes discussion of float
timestamps from the user documentation. A considerable amount of code is
rendered dead by this, but removing that will occur as separate mop-up.
Discussion: https://postgr.es/m/26788.1487455319@sss.pgh.pa.us
When min_parallel_relation_size was added, the only supported type
of parallel scan was a parallel sequential scan, but there are
pending patches for parallel index scan, parallel index-only scan,
and parallel bitmap heap scan. Those patches introduce two new
types of complications: first, what's relevant is not really the
total size of the relation but the portion of it that we will scan;
and second, index pages and heap pages shouldn't necessarily be
treated in exactly the same way. Typically, the number of index
pages will be quite small, but that doesn't necessarily mean that
a parallel index scan can't pay off.
Therefore, we introduce min_parallel_table_scan_size, which works
out a degree of parallelism for scans based on the number of table
pages that will be scanned (and which is therefore equivalent to
min_parallel_relation_size for parallel sequential scans) and also
min_parallel_index_scan_size which can be used to work out a degree
of parallelism based on the number of index pages that will be
scanned.
Amit Kapila and Robert Haas
Discussion: http://postgr.es/m/CAA4eK1KowGSYYVpd2qPpaPPA5R90r++QwDFbrRECTE9H_HvpOg@mail.gmail.com
Discussion: http://postgr.es/m/CAA4eK1+TnM4pXQbvn7OXqam+k_HZqb0ROZUMxOiL6DWJYCyYow@mail.gmail.com
When the new GUC wal_consistency_checking is set to a non-empty value,
it triggers recording of additional full-page images, which are
compared on the standby against the results of applying the WAL record
(without regard to those full-page images). Allowable differences
such as hints are masked out, and the resulting pages are compared;
any difference results in a FATAL error on the standby.
Kuntal Ghosh, based on earlier patches by Michael Paquier and Heikki
Linnakangas. Extensively reviewed and revised by Michael Paquier and
by me, with additional reviews and comments from Amit Kapila, Álvaro
Herrera, Simon Riggs, and Peter Eisentraut.
This changes the default values of the following parameters:
wal_level = replica
max_wal_senders = 10
max_replication_slots = 10
in order to make it possible to make a backup and set up simple
replication on the default settings, without requiring a system restart.
Discussion: https://postgr.es/m/CABUevEy4PR_EAvZEzsbF5s+V0eEvw7shJ2t-AUwbHOjT+yRb3A@mail.gmail.com
Reviewed by Peter Eisentraut. Benchmark help from Tomas Vondra.
It is no longer necessary to restart the server to enable, disable,
or reconfigure SSL. Instead, we just create a new SSL_CTX struct
(by re-reading all relevant files) whenever we get SIGHUP. Testing
shows that this is fast enough that it shouldn't be a problem.
In conjunction with that, downgrade the logic that complains about
pg_hba.conf "hostssl" lines when SSL isn't active: now that's just
a warning condition not an error.
An issue that still needs to be addressed is what shall we do with
passphrase-protected server keys? As this stands, the server would
demand the passphrase again on every SIGHUP, which is certainly
impractical. But the case was only barely supported before, so that
does not seem a sufficient reason to hold up committing this patch.
Andreas Karlsson, reviewed by Michael Banck and Michael Paquier
Discussion: https://postgr.es/m/556A6E8A.9030400@proxel.se
Some background activity (like checkpoints, archive timeout, standby
snapshots) is not supposed to happen on an idle system. Unfortunately
so far it was not easy to determine when a system is idle, which
defeated some of the attempts to avoid redundant activity on an idle
system.
To make that easier, allow to make individual WAL insertions as not
being "important". By checking whether any important activity happened
since the last time an activity was performed, it now is easy to check
whether some action needs to be repeated.
Use the new facility for checkpoints, archive timeout and standby
snapshots.
The lack of a facility causes some issues in older releases, but in my
opinion the consequences (superflous checkpoints / archived segments)
aren't grave enough to warrant backpatching.
Author: Michael Paquier, editorialized by Andres Freund
Reviewed-By: Andres Freund, David Steele, Amit Kapila, Kyotaro HORIGUCHI
Bug: #13685
Discussion:
https://www.postgresql.org/message-id/20151016203031.3019.72930@wrigleys.postgresql.orghttps://www.postgresql.org/message-id/CAB7nPqQcPqxEM3S735Bd2RzApNqSNJVietAC=6kfkYv_45dKwA@mail.gmail.com
Backpatch: -
This feature is also known as "quorum commit" especially in discussion
on pgsql-hackers.
This commit adds the following new syntaxes into synchronous_standby_names
GUC. By using FIRST and ANY keywords, users can specify the method to
choose synchronous standbys from the listed servers.
FIRST num_sync (standby_name [, ...])
ANY num_sync (standby_name [, ...])
The keyword FIRST specifies a priority-based synchronous replication
which was available also in 9.6 or before. This method makes transaction
commits wait until their WAL records are replicated to num_sync
synchronous standbys chosen based on their priorities.
The keyword ANY specifies a quorum-based synchronous replication
and makes transaction commits wait until their WAL records are
replicated to *at least* num_sync listed standbys. In this method,
the values of sync_state.pg_stat_replication for the listed standbys
are reported as "quorum". The priority is still assigned to each standby,
but not used in this method.
The existing syntaxes having neither FIRST nor ANY keyword are still
supported. They are the same as new syntax with FIRST keyword, i.e.,
a priorirty-based synchronous replication.
Author: Masahiko Sawada
Reviewed-By: Michael Paquier, Amit Kapila and me
Discussion: <CAD21AoAACi9NeC_ecm+Vahm+MMA6nYh=Kqs3KB3np+MBOS_gZg@mail.gmail.com>
Many thanks to the various individuals who were involved in
discussing and developing this feature.
Per discussion, we will not at this time remove trailing whitespace in
psql output displays where it is part of the actual psql output.
From: Vladimir Rusinov <vrusinov@google.com>
Commit b460f5d669 -- at my suggestion --
increased the default value of max_worker_processes from 8 to 16, on
the theory that this would be harmless and convenient for users.
Unfortunately, this caused some buildfarm machines with low connection
limits to start failing, so apparently it's not harmless after all.
Increase the default value of the existing max_worker_processes GUC
from 8 to 16, and add a new max_parallel_workers GUC with a maximum
of 8. This way, even if the maximum amount of parallel query is
happening, there is still room for background workers that do other
things, as originally envisioned when max_worker_processes was added.
Julien Rouhaud, reviewed by Amit Kapila and by revised by me.
Instead of confusingly stating platform-dependent defaults for these
parameters in the comments in postgresql.conf.sample (with the main
entry being a lie on Linux), teach initdb to install the correct
platform-dependent value in postgresql.conf, similarly to the way
we handle other platform-dependent defaults. This won't do anything
for existing 9.6 installations, but since it's effectively only a
documentation improvement, that seems OK.
Since this requires initdb to have access to the default values,
move the #define's for those to pg_config_manual.h; the original
placement in bufmgr.h is unworkable because that file can't be
included by frontend programs.
Adjust the default value for wal_writer_flush_after so that it is 1MB
regardless of XLOG_BLCKSZ, conforming to what is stated in both the
SGML docs and postgresql.conf. (We could alternatively make it scale
with XLOG_BLCKSZ, but I'm not sure I see the point.)
Copy-edit related SGML documentation.
Fabien Coelho and Tom Lane, per a gripe from Tomas Vondra.
Discussion: <30ebc6e3-8358-09cf-44a8-578252938424@2ndquadrant.com>
"xlog" is not a particularly clear abbreviation for "write-ahead log",
and it sometimes confuses users into believe that the contents of the
"pg_xlog" directory are not critical data, leading to unpleasant
consequences. So, rename the directory to "pg_wal".
This patch modifies pg_upgrade and pg_basebackup to understand both
the old and new directory layouts; the former is necessary given the
purpose of the tool, while the latter merely avoids an unnecessary
backward-compatibility break.
We may wish to consider renaming other programs, switches, and
functions which still use the old "xlog" naming to also refer to
"wal". However, that's still under discussion, so let's do just this
much for now.
Discussion: CAB7nPqTeC-8+zux8_-4ZD46V7YPwooeFxgndfsq5Rg8ibLVm1A@mail.gmail.com
Michael Paquier
This value might not be to everyone's taste; in particular, some
people might prefer %t to %m, and others may want %u, %d, or other
fields. However, it's a vast improvement on the old default of ''.
Christoph Berg
This makes the parameter easier to extend, to support other password-based
authentication protocols than MD5. (SCRAM is being worked on.)
The GUC still accepts on/off as aliases for "md5" and "plain", although
we may want to remove those once we actually add support for another
password hash type.
Michael Paquier, reviewed by David Steele, with some further edits by me.
Discussion: <CAB7nPqSMXU35g=W9X74HVeQp0uvgJxvYOuA4A-A3M+0wfEBv-w@mail.gmail.com>
Previously, the individual settings were documented, but there was
no overall discussion of the capabilities and limitations of the
feature. Add that.
Patch by me, reviewed by Peter Eisentraut and Álvaro Herrera.
The performance overhead of this can be significant on Windows, and most
people don't have the tools to view it anyway as Windows does not have
native support for process titles.
Discussion: <0A3221C70F24FB45833433255569204D1F5BE3E8@G01JPEXMBYT05>
Takayuki Tsunakawa
temp_file_limit is a per-process limit, not a per-session limit across
all cooperating parallel processes; change wording accordingly, per a
suggestion from Tom Lane.
Also, document under max_parallel_workers_per_gather the fact that each
process involved in a parallel query may use as many resources as a
separate session. Caveat emptor.
Per a complaint from Peter Geoghegan.
The main point of doing this is to allow the cutoff to be set very small,
even zero, to allow parallel-query behavior to be tested on relatively
small tables such as we typically use in the regression tests. But it
might be of use to users too. The number-of-workers scaling behavior in
create_plain_partial_paths() is pretty ad-hoc and subject to change, so
we won't expose anything about that, but the notion of not considering
parallel query at all for tables below size X seems reasonably stable.
Amit Kapila, per a suggestion from me
Discussion: <17170.1465830165@sss.pgh.pa.us>
While beneficial, both for throughput and average/worst case latency, in
a significant number of workloads, there are other workloads in which
backend_flush_after can cause significant performance regressions in
comparison to < 9.6 releases. The regression is most likely when the hot
data set is bigger than shared buffers, but significantly smaller than
the operating system's page cache.
I personally think that the benefit of enabling backend flush control is
considerably bigger than the potential downsides, but a fair argument
can be made that not regressing is more important than improving
performance/latency. As the latter is the consensus, change the default
to 0.
The other settings introduced in 428b1d6b2 do not have the same
potential for regressions, so leave them enabled.
Benchmarks leading up to changing the default have been performed by
Mithun Cy, Ashutosh Sharma and Robert Haas.
Discussion: CAD__OuhPmc6XH=wYRm_+Q657yQE88DakN4=Ybh2oveFasHkoeA@mail.gmail.com
This terminology provoked widespread complaints. So, instead, rename
the GUC max_parallel_degree to max_parallel_workers_per_gather
(leaving room for a possible future GUC max_parallel_workers that acts
as a system-wide limit), and rename the parallel_degree reloption to
parallel_workers. Rename structure members to match.
These changes create a dump/restore hazard for users of PostgreSQL
9.6beta1 who have set the reloption (or applied the GUC using ALTER
USER or ALTER DATABASE).
Mostly these are just comments but there are a few in documentation
and a handful in code and tests. Hopefully this doesn't cause too much
unnecessary pain for backpatching. I relented from some of the most
common like "thru" for that reason. The rest don't seem numerous
enough to cause problems.
Thanks to Kevin Lyda's tool https://pypi.python.org/pypi/misspellings
We didn't have any real user documentation about how index-only scans
work or how to design indexes to exploit them. Remedy that.
Per gripe from David Johnston.
Hash indexes are not WAL-logged, and so do not maintain the LSN of
index pages. Since the "snapshot too old" feature counts on
detecting error conditions using the LSN of a table and all indexes
on it, this makes it impossible to safely do early vacuuming on any
table with a hash index, so add this to the tests for whether the
xid used to vacuum a table can be adjusted based on
old_snapshot_threshold.
While at it, add a paragraph to the docs for old_snapshot_threshold
which specifically mentions this and other aspects of the feature
which may otherwise surprise users.
Problem reported and patch reviewed by Amit Kapila
If we're not going to reject such setups entirely, throwing a WARNING in
check_synchronous_standby_names() is unhelpful, because it will cause the
warning to be logged again every time the postmaster receives SIGHUP.
Per discussion, just remove the warning.
In passing, improve the documentation for synchronous_commit, which had not
gotten the word that now there can be more than one synchronous standby.
Peter Eisentraut
Tom Lane
Michael Paquier
Alvaro Herrera
Fujii Masao
Andres Freund
Thomas Munro
Andrew Dunstan
Andrew Gierth
Tatsuo Ishii
Peter Eisentraut
Bruce Momjian
Greg Stark
Alexander Korotkov
Teodor Sigaev
Stephen Frost
Robert Haas
Noah Misch
Magnus Hagander
Heikki Linnakangas
Kevin Grittner
Simon Riggs