The newly introduced cancel test in libpq_pipeline was flaky. It's not
completely clear why, but one option is that the check for "active" was
actually seeing the active state for the previous query. This change
should address any such race condition by first waiting until the
connection is reported as idle.
Author: Jelte Fennema-Nio <me@jeltef.nl>
Discussion: https://postgr.es/m/CAGECzQRvmUK5-d68A+cm+fgmfht9Dv2uZ28-qq3QiaF6EAZqPQ@mail.gmail.com
The existing PQcancel API uses blocking IO, which makes PQcancel
impossible to use in an event loop based codebase without blocking the
event loop until the call returns. It also doesn't encrypt the
connection over which the cancel request is sent, even when the original
connection required encryption.
This commit adds a PQcancelConn struct and assorted functions, which
provide a better mechanism of sending cancel requests; in particular all
the encryption used in the original connection are also used in the
cancel connection. The main entry points are:
- PQcancelCreate creates the PQcancelConn based on the original
connection (but does not establish an actual connection).
- PQcancelStart can be used to initiate non-blocking cancel requests,
using encryption if the original connection did so, which must be
pumped using
- PQcancelPoll.
- PQcancelReset puts a PQcancelConn back in state so that it can be
reused to send a new cancel request to the same connection.
- PQcancelBlocking is a simpler-to-use blocking API that still uses
encryption.
Additional functions are
- PQcancelStatus, mimicks PQstatus;
- PQcancelSocket, mimicks PQcancelSocket;
- PQcancelErrorMessage, mimicks PQerrorMessage;
- PQcancelFinish, mimicks PQfinish.
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Denis Laxalde <denis.laxalde@dalibo.com>
Discussion: https://postgr.es/m/AM5PR83MB0178D3B31CA1B6EC4A8ECC42F7529@AM5PR83MB0178.EURPRD83.prod.outlook.com
Most callers of strerror() are removed from the backend code. The
remaining callers require special handling with a saved errno from a
previous system call. The frontend code still needs strerror() where
error states need to be handled outside of fprintf.
Note that pg_regress is not changed to use %m as the TAP output may
clobber errno, since those functions call fprintf() and friends before
evaluating the format string.
Support for %m in src/port/snprintf.c has been added in d6c55de1f9,
hence all the stable branches currently supported include it.
Author: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/87sf13jhuw.fsf@wibble.ilmari.org
This implements a radix tree data structure based on the design in
"The Adaptive Radix Tree: ARTful Indexing for Main-Memory Databases"
by Viktor Leis, Alfons Kemper, and ThomasNeumann, 2013. The main
technique that makes it adaptive is using several different node types,
each with a different capacity of elements, and a different algorithm
for accessing them. The nodes start small and grow/shrink as needed.
The main advantage over hash tables is efficient sorted iteration and
better memory locality when successive keys are lexicographically
close together. The implementation currently assumes 64-bit integer
keys, and traversing the tree is in general slower than a linear
probing hash table, so this is not a general-purpose associative array.
The paper describes two other techniques not implemented here,
namely "path compression" and "lazy expansion". These can further
reduce memory usage and speed up traversal, but the former would add
significant complexity and the latter requires storing the full key
with the value. We do trivially compress the path when leading bytes
of the key are zeros, however.
For value storage, we use "combined pointer/value slots", as
recommended in the paper. Values of size equal or smaller than the the
platform's pointer type are stored in the array of child pointers in
the last level node, while larger values are each stored in a separate
allocation. This is for now fixed at compile time, but it would be
fairly trivial to allow determining at runtime how variable-length
values are stored.
One innovation in our implementation compared to the ART paper is
decoupling the notion of node "size class" from "kind". The size
classes within a given node kind have the same underlying type, but
a variable capacity for children, so we can introduce additional node
sizes with little additional code.
To enable different use cases to specialize for different value types
and for shared/local memory, we use macro-templatized code generation
in the same manner as simplehash.h and sort_template.h.
Future commits will use this infrastructure for storing TIDs.
Patch by Masahiko Sawada and John Naylor, but a substantial amount of
credit is due to Andres Freund, whose proof-of-concept was a valuable
source of coding idioms and awareness of performance pitfalls, and
who reviewed earlier versions.
Discussion: https://postgr.es/m/CAD21AoAfOZvmfR0j8VmZorZjL7RhTiQdVttNuC4W-Shdc2a-AA%40mail.gmail.com
Auto-generated array types, multirange types, and relation rowtypes
are treated as dependent objects: they can't be dropped separately
from the base object, nor can they have their own ownership or
permissions. We previously felt that, for objects that are in an
extension, only the base object needs to be listed as an extension
member in pg_depend. While that's sufficient to prevent inappropriate
drops, it results in undesirable answers if someone asks whether a
dependent type belongs to the extension. It looks like the dependent
type is just some random separately-created object that happens to
depend on the base object. Notably, this results in postgres_fdw
concluding that expressions involving an array type are not shippable
to the remote server, even when the defining extension has been
whitelisted.
To fix, cause GenerateTypeDependencies to make extension dependencies
for dependent types as well as their base objects, and adjust
ExecAlterExtensionContentsStmt so that object addition and removal
operations recurse to dependent types. The latter change means that
pg_upgrade of a type-defining extension will end with the dependent
type(s) now also listed as extension members, even if they were
not that way in the source database. Normally we want pg_upgrade
to precisely reproduce the source extension's state, but it seems
desirable to make an exception here.
This is arguably a bug fix, but we can't back-patch it since it
causes changes in the expected contents of pg_depend. (Because
it does, I've bumped catversion, even though there's no change
in the immediate post-initdb catalog contents.)
Tom Lane and David Geier
Discussion: https://postgr.es/m/4a847c55-489f-4e8d-a664-fc6b1cbe306f@gmail.com
This commit adds two features to the in-core module for injection
points:
- A new callback called "wait" that can be attached to an injection
point to make it wait.
- A new SQL function to update the shared state and broadcast the update
using a condition variable. This function uses an input an injection
point name.
This offers the possibility to stop a process in flight and wake it up
in a controlled manner, which is useful when implementing tests that aim
to trigger scenarios for race conditions (some tests are planned for
integration). The logic uses a set of counters with a condition
variable to monitor and broadcast the changes. Up to 8 waits can be
registered in a single run, which should be plenty enough. Waits can be
monitored in pg_stat_activity, based on the injection point name which
is registered in a custom wait event under the "Extension" category.
The shared memory state used by the module is registered using the DSM
registry, and is optional, so there is no need to load the module with
shared_preload_libraries to be able to use these features.
Author: Michael Paquier
Reviewed-by: Andrey Borodin, Bertrand Drouvot
Discussion: https://postgr.es/m/ZdLuxBk5hGpol91B@paquier.xyz
More precisely, what we do here is make the SLRU cache sizes
configurable with new GUCs, so that sites with high concurrency and big
ranges of transactions in flight (resp. multixacts/subtransactions) can
benefit from bigger caches. In order for this to work with good
performance, two additional changes are made:
1. the cache is divided in "banks" (to borrow terminology from CPU
caches), and algorithms such as eviction buffer search only affect
one specific bank. This forestalls the problem that linear searching
for a specific buffer across the whole cache takes too long: we only
have to search the specific bank, whose size is small. This work is
authored by Andrey Borodin.
2. Change the locking regime for the SLRU banks, so that each bank uses
a separate LWLock. This allows for increased scalability. This work
is authored by Dilip Kumar. (A part of this was previously committed as
d172b717c6f4.)
Special care is taken so that the algorithms that can potentially
traverse more than one bank release one bank's lock before acquiring the
next. This should happen rarely, but particularly clog.c's group commit
feature needed code adjustment to cope with this. I (Álvaro) also added
lots of comments to make sure the design is sound.
The new GUCs match the names introduced by bcdfa5f2e2 in the
pg_stat_slru view.
The default values for these parameters are similar to the previous
sizes of each SLRU. commit_ts, clog and subtrans accept value 0, which
means to adjust by dividing shared_buffers by 512 (so 2MB for every 1GB
of shared_buffers), with a cap of 8MB. (A new slru.c function
SimpleLruAutotuneBuffers() was added to support this.) The cap was
previously 1MB for clog, so for sites with more than 512MB of shared
memory the total memory used increases, which is likely a good tradeoff.
However, other SLRUs (notably multixact ones) retain smaller sizes and
don't support a configured value of 0. These values based on
shared_buffers may need to be revisited, but that's an easy change.
There was some resistance to adding these new GUCs: it would be better
to adjust to memory pressure automatically somehow, for example by
stealing memory from shared_buffers (where the caches can grow and
shrink naturally). However, doing that seems to be a much larger
project and one which has made virtually no progress in several years,
and because this is such a pain point for so many users, here we take
the pragmatic approach.
Author: Andrey Borodin <x4mmm@yandex-team.ru>
Author: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Amul Sul, Gilles Darold, Anastasia Lubennikova,
Ivan Lazarev, Robert Haas, Thomas Munro, Tomas Vondra,
Yura Sokolov, Васильев Дмитрий (Dmitry Vasiliev).
Discussion: https://postgr.es/m/2BEC2B3F-9B61-4C1D-9FB5-5FAB0F05EF86@yandex-team.ru
Discussion: https://postgr.es/m/CAFiTN-vzDvNz=ExGXz6gdyjtzGixKSqs0mKHMmaQ8sOSEFZ33A@mail.gmail.com
ginFinishSplit() expects the caller to hold an exclusive lock on the
buffer, but when finishing an earlier "leftover" incomplete split of
an internal page, the caller held a shared lock. That caused an
assertion failure in MarkBufferDirty(). Without assertions, it could
lead to corruption if two backends tried to complete the split at the
same time.
On master, add a test case using the new injection point facility.
Report and analysis by Fei Changhong. Backpatch the fix to all
supported versions.
Reviewed-by: Fei Changhong, Michael Paquier
Discussion: https://www.postgresql.org/message-id/tencent_A3CE810F59132D8E230475A5F0F7A08C8307@qq.com
This provides basic coverage for injection points within a single
process, while providing some callbacks that can be used for other
tests. There are plans to extend this module later with more
advanced capabilities for tests.
Author: Michael Paquier, with comment fixes from Ashutosh Bapat.
Reviewed-by: Ashutosh Bapat, Nathan Bossart, Álvaro Herrera, Dilip
Kumar, Amul Sul, Nazir Bilal Yavuz
Discussion: https://postgr.es/m/ZTiV8tn_MIb_H2rE@paquier.xyz
Presently, the most straightforward way for a shared library to use
shared memory is to request it at server startup via a
shmem_request_hook, which requires specifying the library in
shared_preload_libraries. Alternatively, the library can create a
dynamic shared memory (DSM) segment, but absent a shared location
to store the segment's handle, other backends cannot use it. This
commit introduces a registry for DSM segments so that these other
backends can look up existing segments with a library-specified
string. This allows libraries to easily use shared memory without
needing to request it at server startup.
The registry is accessed via the new GetNamedDSMSegment() function.
This function handles allocating the segment and initializing it
via a provided callback. If another backend already created and
initialized the segment, it simply attaches the segment.
GetNamedDSMSegment() locks the registry appropriately to ensure
that only one backend initializes the segment and that all other
backends just attach it.
The registry itself is comprised of a dshash table that stores the
DSM segment handles keyed by a library-specified string.
Reviewed-by: Michael Paquier, Andrei Lepikhov, Nikita Malakhov, Robert Haas, Bharath Rupireddy, Zhang Mingli, Amul Sul
Discussion: https://postgr.es/m/20231205034647.GA2705267%40nathanxps13
Previously, identity columns were disallowed on partitioned tables.
(The reason was mainly that no one had gotten around to working
through all the details to make it work.) This makes it work now.
Some details on the behavior:
* A newly created partition inherits identity property
The partitions of a partitioned table are integral part of the
partitioned table. A partition inherits identity columns from the
partitioned table. An identity column of a partition shares the
identity space with the corresponding column of the partitioned
table. In other words, the same identity column across all
partitions of a partitioned table share the same identity space.
This is effected by sharing the same underlying sequence.
When INSERTing directly into a partition, the sequence associated
with the topmost partitioned table is used to calculate the value of
the corresponding identity column.
In regular inheritance, identity columns and their properties in a
child table are independent of those in its parent tables. A child
table does not inherit identity columns or their properties
automatically from the parent. (This is unchanged.)
* Attached partition inherits identity column
A table being attached as a partition inherits the identity property
from the partitioned table. This should be fine since we expect
that the partition table's column has the same type as the
partitioned table's corresponding column. If the table being
attached is a partitioned table, the identity properties are
propagated down its partition hierarchy.
An identity column in the partitioned table is also marked as NOT
NULL. The corresponding column in the partition needs to be marked
as NOT NULL for the attach to succeed.
* Drop identity property when detaching partition
A partition's identity column shares the identity space
(i.e. underlying sequence) as the corresponding column of the
partitioned table. If a partition is detached it can longer share
the identity space as before. Hence the identity columns of the
partition being detached loose their identity property.
When identity of a column of a regular table is dropped it retains
the NOT NULL constraint that came with the identity property.
Similarly the columns of the partition being detached retain the NOT
NULL constraints that came with identity property, even though the
identity property itself is lost.
The sequence associated with the identity property is linked to the
partitioned table (and not the partition being detached). That
sequence is not dropped as part of detach operation.
* Partitions with their own identity columns are not allowed.
* The usual ALTER operations (add identity column, add identity
property to existing column, alter properties of an indentity
column, drop identity property) are supported for partitioned
tables. Changing a column only in a partitioned table or a
partition is not allowed; the change needs to be applied to the
whole partition hierarchy.
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/CAExHW5uOykuTC+C6R1yDSp=o8Q83jr8xJdZxgPkxfZ1Ue5RRGg@mail.gmail.com
This new function is equivalent to PQpipelineSync(), except that it does
not flush anything to the server except if the size threshold of the
output buffer is reached; the user must subsequently call PQflush()
instead.
Its purpose is to reduce the system call overhead of pipeline mode, by
giving to applications more control over the timing of the flushes when
manipulating commands in pipeline mode.
Author: Anton Kirilov
Reviewed-by: Jelte Fennema-Nio, Robert Haas, Álvaro Herrera, Denis
Laxalde, Michael Paquier
Discussion: https://postgr.es/m/CACV6eE5arHFZEA717=iKEa_OewpVFfWJOmsOdGrqqsr8CJVfWQ@mail.gmail.com
This adds a new ALTER TABLE subcommand ALTER COLUMN ... SET EXPRESSION
that changes the generation expression of a generated column.
The syntax is not standard but was adapted from other SQL
implementations.
This command causes a table rewrite, using the usual ALTER TABLE
mechanisms. The implementation is similar to and makes use of some of
the infrastructure of the SET DATA TYPE subcommand (for example,
rebuilding constraints and indexes afterwards). The new command
requires a new pass in AlterTablePass, and the ADD COLUMN pass had to
be moved earlier so that combinations of ADD COLUMN and SET EXPRESSION
can work.
Author: Amul Sul <sulamul@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAAJ_b94yyJeGA-5M951_Lr+KfZokOp-2kXicpmEhi5FXhBeTog@mail.gmail.com
There are a lot of Perl scripts in the tree, mostly code generation
and TAP tests. Occasionally, these scripts produce warnings. These
are probably always mistakes on the developer side (true positives).
Typical examples are warnings from genbki.pl or related when you make
a mess in the catalog files during development, or warnings from tests
when they massage a config file that looks different on different
hosts, or mistakes during merges (e.g., duplicate subroutine
definitions), or just mistakes that weren't noticed because there is a
lot of output in a verbose build.
This changes all warnings into fatal errors, by replacing
use warnings;
by
use warnings FATAL => 'all';
in all Perl files.
Discussion: https://www.postgresql.org/message-id/flat/06f899fd-1826-05ab-42d6-adeb1fd5e200%40eisentraut.org
Allow using multiple worker processes to build BRIN index, which until
now was supported only for BTREE indexes. For large tables this often
results in significant speedup when the build is CPU-bound.
The work is split in a simple way - each worker builds BRIN summaries on
a subset of the table, determined by the regular parallel scan used to
read the data, and feeds them into a shared tuplesort which sorts them
by blkno (start of the range). The leader then reads this sorted stream
of ranges, merges duplicates (which may happen if the parallel scan does
not align with BRIN pages_per_range), and adds the resulting ranges into
the index.
The number of duplicate results produced by workers (requiring merging
in the leader process) should be fairly small, thanks to how parallel
scans assign chunks to workers. The likelihood of duplicate results may
increase for higher pages_per_range values, but then there are fewer
page ranges in total. In any case, we expect the merging to be much
cheaper than summarization, so this should be a win.
Most of the parallelism infrastructure is a simplified copy of the code
used by BTREE indexes, omitting the parts irrelevant for BRIN indexes
(e.g. uniqueness checks).
This also introduces a new index AM flag amcanbuildparallel, determining
whether to attempt to start parallel workers for the index build.
Original patch by me, with reviews and substantial reworks by Matthias
van de Meent, certainly enough to make him a co-author.
Author: Tomas Vondra, Matthias van de Meent
Reviewed-by: Matthias van de Meent
Discussion: https://postgr.es/m/c2ee7d69-ce17-43f2-d1a0-9811edbda6e6%40enterprisedb.com
The test module includes helper functions to quickly burn through lots
of XIDs. They are used in the tests, and are also handy for manually
testing XID wraparound.
Since these tests are very expensive the entire suite is disabled by
default. It requires to set PG_TEST_EXTRA to run it.
Reviewed-by: Daniel Gustafsson, John Naylor, Michael Paquier
Reviewed-by: vignesh C
Author: Heikki Linnakangas, Masahiko Sawada, Andres Freund
Discussion: https://www.postgresql.org/message-id/CAD21AoDVhkXp8HjpFO-gp3TgL6tCKcZQNxn04m01VAtcSi-5sA%40mail.gmail.com
Quotes are applied to GUCs in a very inconsistent way across the code
base, with a mix of double quotes or no quotes used. This commit
removes double quotes around all the GUC names that are obviously
referred to as parameters with non-English words (use of underscore,
mixed case, etc).
This is the result of a discussion with Álvaro Herrera, Nathan Bossart,
Laurenz Albe, Peter Eisentraut, Tom Lane and Daniel Gustafsson.
Author: Peter Smith
Discussion: https://postgr.es/m/CAHut+Pv-kSN8SkxSdoHano_wPubqcg5789ejhCDZAcLFceBR-w@mail.gmail.com
We've had repeated bugs in the area of handling SLRU wraparound in the past,
some of which have caused data loss. Switching to an indexing system for SLRUs
that does not wrap around should allow us to get rid of a whole bunch
of problems and improve the overall reliability of the system.
This particular patch however only changes the indexing and doesn't address
the wraparound per se. This is going to be done in the following patches.
Author: Maxim Orlov, Aleksander Alekseev, Alexander Korotkov, Teodor Sigaev
Author: Nikita Glukhov, Pavel Borisov, Yura Sokolov
Reviewed-by: Jacob Champion, Heikki Linnakangas, Alexander Korotkov
Reviewed-by: Japin Li, Pavel Borisov, Tom Lane, Peter Eisentraut, Andres Freund
Reviewed-by: Andrey Borodin, Dilip Kumar, Aleksander Alekseev
Discussion: https://postgr.es/m/CACG%3DezZe1NQSCnfHOr78AtAZxJZeCvxrts0ygrxYwe%3DpyyjVWA%40mail.gmail.com
Discussion: https://postgr.es/m/CAJ7c6TPDOYBYrnCAeyndkBktO0WG2xSdYduTF0nxq%2BvfkmTF5Q%40mail.gmail.com
checkExtensionMembership() set the DUMP_COMPONENT_SECLABEL and
DUMP_COMPONENT_POLICY flags for extension member objects, even though
we lack any infrastructure for tracking extensions' initial settings
of these properties. This is not OK. The result was that a dump
would always include commands to set these properties for extension
objects that have them, with at least three negative consequences:
1. The restoring user might not have privilege to set these properties
on these objects.
2. The properties might be incorrect/irrelevant for the version of the
extension that's installed in the destination database.
3. The dump itself might fail, in the case of RLS properties attached
to extension tables that the dumping user lacks privilege to LOCK.
(That's because we must get at least AccessShareLock to ensure that
we don't fail while trying to decompile the RLS expressions.)
When and if somebody cares to invent initial-state infrastructure for
extensions' RLS policies and security labels, we could think about
finding another way around problem #3. But in the absence of such
infrastructure, this whole thing is just wrong and we shouldn't do it.
(Note: this applies only to ordinary dumps; binary-upgrade dumps
still dump and restore extension member objects separately, with
all properties.)
Tom Lane and Jacob Champion. Back-patch to all supported branches.
Discussion: https://postgr.es/m/00d46a48-3324-d9a0-49bf-e7f0f11d1038@timescale.com
Instead of having a separate array/hash for each resource kind, use a
single array and hash to hold all kinds of resources. This makes it
possible to introduce new resource "kinds" without having to modify
the ResourceOwnerData struct. In particular, this makes it possible
for extensions to register custom resource kinds.
The old approach was to have a small array of resources of each kind,
and if it fills up, switch to a hash table. The new approach also uses
an array and a hash, but now the array and the hash are used at the
same time. The array is used to hold the recently added resources, and
when it fills up, they are moved to the hash. This keeps the access to
recent entries fast, even when there are a lot of long-held resources.
All the resource-specific ResourceOwnerEnlarge*(),
ResourceOwnerRemember*(), and ResourceOwnerForget*() functions have
been replaced with three generic functions that take resource kind as
argument. For convenience, we still define resource-specific wrapper
macros around the generic functions with the old names, but they are
now defined in the source files that use those resource kinds.
The release callback no longer needs to call ResourceOwnerForget on
the resource being released. ResourceOwnerRelease unregisters the
resource from the owner before calling the callback. That needed some
changes in bufmgr.c and some other files, where releasing the
resources previously always called ResourceOwnerForget.
Each resource kind specifies a release priority, and
ResourceOwnerReleaseAll releases the resources in priority order. To
make that possible, we have to restrict what you can do between
phases. After calling ResourceOwnerRelease(), you are no longer
allowed to remember any more resources in it or to forget any
previously remembered resources by calling ResourceOwnerForget. There
was one case where that was done previously. At subtransaction commit,
AtEOSubXact_Inval() would handle the invalidation messages and call
RelationFlushRelation(), which temporarily increased the reference
count on the relation being flushed. We now switch to the parent
subtransaction's resource owner before calling AtEOSubXact_Inval(), so
that there is a valid ResourceOwner to temporarily hold that relcache
reference.
Other end-of-xact routines make similar calls to AtEOXact_Inval()
between release phases, but I didn't see any regression test failures
from those, so I'm not sure if they could reach a codepath that needs
remembering extra resources.
There were two exceptions to how the resource leak WARNINGs on commit
were printed previously: llvmjit silently released the context without
printing the warning, and a leaked buffer io triggered a PANIC. Now
everything prints a WARNING, including those cases.
Add tests in src/test/modules/test_resowner.
Reviewed-by: Aleksander Alekseev, Michael Paquier, Julien Rouhaud
Reviewed-by: Kyotaro Horiguchi, Hayato Kuroda, Álvaro Herrera, Zhihong Yu
Reviewed-by: Peter Eisentraut, Andres Freund
Discussion: https://www.postgresql.org/message-id/cbfabeb0-cd3c-e951-a572-19b365ed314d%40iki.fi
The test missed that custom GUCs need to be ignored from the list of
parameters that can exist in postgresql.conf.sample. This caused the
test to fail on a server where such a module is loaded, when using
EXTRA_INSTALL and TEMP_CONFIG, for instance.
Author: Anton A. Melnikov
Discussion: https://postgr.es/m/fc5509ce-5144-4dac-8d13-21793da44fc5@postgrespro.ru
Backpatch-through: 15
Since C99, there can be a trailing comma after the last value in an
enum definition. A lot of new code has been introducing this style on
the fly. Some new patches are now taking an inconsistent approach to
this. Some add the last comma on the fly if they add a new last
value, some are trying to preserve the existing style in each place,
some are even dropping the last comma if there was one. We could
nudge this all in a consistent direction if we just add the trailing
commas everywhere once.
I omitted a few places where there was a fixed "last" value that will
always stay last. I also skipped the header files of libpq and ecpg,
in case people want to use those with older compilers. There were
also a small number of cases where the enum type wasn't used anywhere
(but the enum values were), which ended up confusing pgindent a bit,
so I left those alone.
Discussion: https://www.postgresql.org/message-id/flat/386f8c45-c8ac-4681-8add-e3b0852c1620%40eisentraut.org
Previously, ALTER SYSTEM failed if the target GUC wasn't present in
the session's GUC hashtable. That is a reasonable behavior for core
(single-part) GUC names, and for custom GUCs for which we have loaded
an extension that's reserved the prefix. But it's unnecessarily
restrictive otherwise, and it also causes inconsistent behavior:
you can "ALTER SYSTEM SET foo.bar" only if you did "SET foo.bar"
earlier in the session. That's fairly silly.
Hence, refactor things so that we can execute ALTER SYSTEM even
if the variable doesn't have a GUC hashtable entry, as long as the
name meets the custom-variable naming requirements and does not
have a reserved prefix. (It's safe to do this even if the
variable belongs to an extension we currently don't have loaded.
A bad value will at worst cause a WARNING when the extension
does get loaded.)
Also, adjust GRANT ON PARAMETER to have the same opinions about
whether to allow an unrecognized GUC name, and to throw the
same errors if not (it previously used a one-size-fits-all
message for several distinguishable conditions). By default,
only a superuser will be allowed to do ALTER SYSTEM SET on an
unrecognized name, but it's possible to GRANT the ability to
do it.
Patch by me, pursuant to a documentation complaint from
Gavin Panella. Arguably this is a bug fix, but given the
lack of other complaints I'll refrain from back-patching.
Discussion: https://postgr.es/m/2617358.1697501956@sss.pgh.pa.us
Discussion: https://postgr.es/m/169746329791.169914.16613647309012285391@wrigleys.postgresql.org
This is a consequence of 4817da51f6 that has bumped up
max_worker_processes, where now the last worker started by the test
would be able to start by itself a parallel worker because there are
more slots available. This did not show up before as the number of
bgworkers reached exactly 8, as known as the previous limit, at the end
of the test.
Per report from buildfarm member crake, reproducible with
debug_parallel_query = regress in the same fashion as fd4d93d269.
mamba has detected a failure in the last test that should start a
bgworker while bypassing the role login check. The buildfarm did not
provide any information about its failure in the logs, but I suspect
that this is caused by an exhaustion of the max_worker_processes slots
set at 8 by default.
In "normal" test runs, the number of bgworkers running at this stage of
the test is already 7, so, if one of them spawns for example a parallel
worker all the slots would be taken, preventing the last worker of the
test to start.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/ZSyebsiub88pyJJO@paquier.xyz
This adds a new option called BGWORKER_BYPASS_ROLELOGINCHECK to the
flags available to BackgroundWorkerInitializeConnection() and
BackgroundWorkerInitializeConnectionByOid().
This gives the possibility to bgworkers to bypass the role login check,
making possible the use of a role that has no login rights while not
being a superuser. PostgresInit() gains a new flag called
INIT_PG_OVERRIDE_ROLE_LOGIN, taking advantage of the refactoring done in
4800a5dfb4.
Regression tests are added to worker_spi to check the behavior of this
new option with bgworkers.
Author: Bertrand Drouvot
Reviewed-by: Nathan Bossart, Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/bcc36259-7850-4882-97ef-d6b905d2fc51@gmail.com
worker_spi_launch() may report that a worker stopped when it fails to
connect on a database that does not allow connections if the worker
exits before the SQL function checks for the current status of the
worker. The test is switched to use Cluster::psql instead of
safe_psql() so as it does not fail hard when this query errors. While
on it, this removes a query that looks at pg_stat_activity to simplify
the test, as a check on the contents of the server logs achieves the
same when the worker cannot connect to the database without
datallowconn.
Per buildfarm members kestrel, mamba and serinus. Bonus thanks to Tom
Lane for providing the logs of the failure from mamba that the buildfarm
was not able to show up. Note that I have reproduced the failure with a
hardcoded stop point.
Discussion: https://postgr.es/m/3365937.1696801735@sss.pgh.pa.us
A bgworker can spawn parallel workers of its own when executing queries,
and if the worker uses BGWORKER_BYPASS_ALLOWCONN while the database it
is connected to does not allow connections, a parallel worker would fail
to startup. In the case of this module, the step checking for the
presence of the schema to create was spawning a worker, failing the last
test introduced by 991bb0f965.
This issue could be reproduced with debug_parallel_query = 'regress',
for example.
Per buildfarm member crake.
