execution state trees, and ExecEvalExpr takes an expression state tree
not an expression plan tree. The plan tree is now read-only as far as
the executor is concerned. Next step is to begin actually exploiting
this property.
in the year. This version has only the two files required by the Darwin
startup bundle design. Plus the sh script now uses Darwin-standard
functions to start up PostgreSQL, and it checks for the presence of a
variable in /etc/hostconfig, as do other Darwin startup scripts.
I suggest that a new directory be created,
contrib/start-scripts/darwin, and that these two files be put into it.
Folks who want to use the script can read the comments inside it to
figure out how to use it.
David Wheeler
exists if and only if locale of postmaster
was a different from C (or ru_RU.KOI8-R).
Please, apply patch for current CVS & 7.3.1
Magnus Naeslund(f) wrote:
> Ok, I nailed the bug, but i'm not sure what the correct fix is.
> Attached tsearch_morph.diff that remedies this problem by avoiding it.
> Also there's a debug aid patch if someone would like to know how i
> finally found it out :)
>
> There problem in the lemmatize() function is that GETDICT(...) returned
> a value not handled (BYLOCALE).
> The value (-1) and later used as an index into the dicts[] array.
> After that everything went berserk stack went crazy somehow so trapping
> the fault sent me to the wrong place, and every time i read the value it
> was positive ;)
>
> So now i just return the initial word passed to the lemmatize function,
> because i don't know what to do with it.
Magnus Naeslund
tested a patch to contrib/xml where the existing code was causing
postgres to crash when it encountered & entities in the XML. I've
enclosed a patch that John came up with to correct this problem. It
patches against 7.3 and will apply on 7.2x if the elog WARNING calls
are changed to elog NOTICE.
Michael Richards
"SET search_path" commands were added to the beginning of the script.
The attatched patch should fix the problem. It probably should be
applied against the 7.3 and 7.4 branches.
Steven Singer
with regard to the extra_float_digits setting.
Since builtins.h was already included, I just deleted the extern
statement (and accompaning comments).
Bruno Wolff III
is pgcrypto bug as it assumed too much about inner workings of OpenSSL.
Following patch stops pgcrypto using EVP* functions for ciphers and lets
it manage ciphers itself.
This patch supports Blowfish, DES and CAST5 algorithms.
Marko Kreen
points on the surface of the earth and locating points within a
specified distance using an index based on the contrib/cube package. The
new functions are all of language type sql. A couple of bugs in the old
earthdistance function based on the point datatype are fixed. A
regression test has been added for both sets of functions. The README
file has been updated to include documentation on the new stuff. There
are comments about how this package is also useful for Astronomers.
Bruno Wolff III
(usually bison output files), not as standalone files. This hack
works around flex's insistence on including <stdio.h> before we are
able to include postgres.h; postgres.h will already be read before
the compiler starts to read the flex output file. Needed for largefile
support on some platforms.
left a reference to cube in a comment in the regression test (that also
shows up in the expected output). This doesn't cause any real problem,
but people who read the comment might be confused. Attached is a diff to
remove the reference.
Bruno Wolff III
-Support for mirroring tables in different Schema's
-Improved documentation for compiling with 7.1.x and 7.2.x
-Fixes a buffer overrun bug.
Steven Singer
Create objects in public schema.
Make spacing/capitalization consistent.
Remove transaction block use for object creation.
Remove unneeded function GRANTs.
contrib/contrib-global.mk library and _generally_ behave like
Makefiles for other contrib modules.
Besides it fixes Perl's interpolation of $libdir variable, which
should be passed to backend instead. This patch is done against
PostgreSQL 7.3b2
Besides, I want to thank Peter Eisentraut for his very friendly and
helpful attitude and politely ask him to check whether contrib
modules actually continue to work after he implements another
major change to their build process.
Alexey Borzov
false. per Tom Lane's suggestion. See:
Subject: Suggested change to pgbench
From: Tom Lane <tgl@sss.pgh.pa.us>
To: Tatsuo Ishii <t-ishii@sra.co.jp>
Cc: pgsql-patches@postgreSQL.org
Date: Sun, 06 Oct 2002 12:37:27 -0400
for more details.
> contrib/tablefunc/tablefunc.c:connectby. But, other unmanageable error
> seems to occur even if a table has commonplace tree data(see below).
>
> I would think the patch, ancestor check, should be
>
> if (strstr(branch_delim || branchstr->data || branch_delim,
> branch_delim || current_key || branch_delim))
>
> This is my image, not a real code. However, if branchstr->data includes
> branch_delim, my image will not be perfect.
Good point. Thank you Masaru for the suggested fix.
Attached is a patch to fix the bug found by Masaru. His example now
produces:
regression=# SELECT * FROM connectby('connectby_tree', 'keyid',
'parent_keyid', '11', 0, '-') AS t(keyid int, parent_keyid int, level
int,
branch text);
keyid | parent_keyid | level | branch
-------+--------------+-------+----------
11 | | 0 | 11
10 | 11 | 1 | 11-10
111 | 11 | 1 | 11-111
1 | 111 | 2 | 11-111-1
(4 rows)
While making the patch I also realized that the "no show branch" form of
the function was not going to work very well for recursion detection.
Therefore there is now a default branch delimiter ('~') that is used
internally, for that case, to enable recursion detection to work. If
you need a different delimiter for your specific data, you will have to
use the "show branch" form of the function.
Joe Conway
causing the postmaster to crash when the trigger was running on a table
without a primary key.
I've also updated the docs to explicitly say that tables need primary
keys.
Steven Singer
YYERROR_VERBOSE" from contrib/cube and contrib/seg, and adjusts the expected
output accordingly. Hopefully this will consistently pass across multiple
bison versions.
Joe Conway
instead of int, change the calculation method to use the haversine
formula
which is more accurrate for short distances, added a grant to public for
geo_distance and added a regression test.
I will resubmit the earth distance stuff based on cube after 7.3 is
released.
Bruno Wolff III
non-standard regression test, and adds standard installcheck regression test
support.
The test creates a second database (regression_slave) and drops it again, in
order to avoid the cheesy-ness of connecting back to the same database ;-)
Joe Conway
contrib/tablefunc. Specifically it replaces the use of VIEWs (for needed
composite type creation) with use of CREATE TYPE. It also performs GRANT
EXECUTE ON FUNCTION foo() TO PUBLIC for all of the created functions. There
was also a cosmetic change to two regression files.
Joe Conway
attached to the same message with the Earth Distance patches.
Recent changes include changing the subscript in one place I forgot
in the previous bugfix patch. A couple of added regression tests, which
should help catch this mistake if it reappears.
I also put in a limit of 100 dimensions in cube_large and cube_in to
prevent making it easy to create very large cubes. Changing one define
in cubedata.h will raise the limit if some needs more dimensions.
Bruno Wolff III
> arrays using largely-similar code. But while intarray fails its
> regression test, I find ltree still passes. So I'm confused about what
> that code is really doing and don't want to touch it.
Please, apply attached patch, it solves the problem.
Teodor Sigaev
> be a useful function for many users. However, I found the fact that
> if connectby_tree has the following data, connectby() tries to search the end
> of roots without knowing that the relations are infinite(-5-9-10-11-9-10-11-)
.
> I hope connectby() supports a check routine to find infinite relations.
>
>
> CREATE TABLE connectby_tree(keyid int, parent_keyid int);
> INSERT INTO connectby_tree VALUES(1,NULL);
> INSERT INTO connectby_tree VALUES(2,1);
> INSERT INTO connectby_tree VALUES(3,1);
> INSERT INTO connectby_tree VALUES(4,2);
> INSERT INTO connectby_tree VALUES(5,2);
> INSERT INTO connectby_tree VALUES(6,4);
> INSERT INTO connectby_tree VALUES(7,3);
> INSERT INTO connectby_tree VALUES(8,6);
> INSERT INTO connectby_tree VALUES(9,5);
>
> INSERT INTO connectby_tree VALUES(10,9);
> INSERT INTO connectby_tree VALUES(11,10);
> INSERT INTO connectby_tree VALUES(9,11); <-- infinite
>
The attached patch fixes the infinite recursion bug in
contrib/tablefunc/tablefunc.c:connectby found by Masaru Sugawara.
test=# SELECT * FROM connectby('connectby_tree', 'keyid',
'parent_keyid', '2', 4, '~') AS t(keyid int, parent_keyid int, level
int, branch text);
keyid | parent_keyid | level | branch
-------+--------------+-------+-------------
2 | | 0 | 2
4 | 2 | 1 | 2~4
6 | 4 | 2 | 2~4~6
8 | 6 | 3 | 2~4~6~8
5 | 2 | 1 | 2~5
9 | 5 | 2 | 2~5~9
10 | 9 | 3 | 2~5~9~10
11 | 10 | 4 | 2~5~9~10~11
(8 rows)
test=# SELECT * FROM connectby('connectby_tree', 'keyid',
'parent_keyid', '2', 5, '~') AS t(keyid int, parent_keyid int, level
int, branch text);
ERROR: infinite recursion detected
I implemented it by checking the branch string for repeated keys
(whether or not the branch is returned). The performance hit was pretty
minimal -- about 1% for a moderately complex test case (220000 record
table, 9 level tree with 3800 members).
Joe Conway
for contrib/intarray.
The cause was that the library uses its own function to construct a new
array, new_intArrayType, and that function did not set the new array
struct attribute elemtype.
Joe Conway
Eliminate the mysterious games that the Cygwin build plays with the linker
flag variables. DLLLIBS is gone, use SHLIB_LINK like everyone else.
Detect cygipc in configure, after the linker flags are set up, otherwise
configure might not work at all.
Make sure everything is covered by make clean.
Fix the build of the new conversion procedure modules.
Add new DLLIMPORT markers where required.
Finally, the compiler complains if we use an explicit
-I/usr/local/include, so don't do that. Curiously, -L/usr/local/lib is
still necessary.
beta, at least get this stuff in.
ftipatch.txt - Updates to docs and scripts. Run in the fulltextindexdir
WARNING - Add to fulltextindex dir
uninstall.sql - Add to fulltextindex dir
review/feedback if anyone is interested and can spend the time. But I'd
also love to get this committed and address changes as incremental
patches ;-), so if there are no objections, please apply.
Below I'll give a synopsis of the changes. More detailed descriptions
are now in a new doc directory under contrib/dblink. There is also a new
dblink.test.sql file which will give a pretty good overview of the
functions and their use.
Joe Conway
already fixed by You. However there were a few left and attached patch
should fix the rest of them.
I used StringInfo only in 2 places and both of them are inside debug
ifdefs. Only performance penalty will come from using strlen() like all
the other code does.
I also modified some of the already patched parts by changing
snprintf(buf, 2 * BUFSIZE, ... style lines to
snprintf(buf, sizeof(buf), ... where buf is an array.
Jukka Holappa
function, connectby(), which can serve as a reference implementation for
the changes made in the last few days -- namely the ability of a
function to return an entire tuplestore, and the ability of a function
to make use of the query provided "expected" tuple description.
Description:
connectby(text relname, text keyid_fld, text parent_keyid_fld,
text start_with, int max_depth [, text branch_delim])
- returns keyid, parent_keyid, level, and an optional branch string
- requires anonymous composite type syntax in the FROM clause. See
the instructions in the documentation below.
Joe Conway
(overlaying low byte of page size) and add HEAP_HASOID bit to t_infomask,
per earlier discussion. Simplify scheme for overlaying fields in tuple
header (no need for cmax to live in more than one place). Don't try to
clear infomask status bits in tqual.c --- not safe to do it there. Don't
try to force output table of a SELECT INTO to have OIDs, either. Get rid
of unnecessarily complex three-state scheme for TupleDesc.tdhasoids, which
has already caused one recent failure. Improve documentation.
diffs to 7.3-devel and may not be applicable to 7.2. I have included a
change covered by a previous bugfix patch I submitted (the problem with
-.1 not being accepted by cube_in). It does not include a fix for the
potential buffer overrun issue I reported for cube_yyerror in
cubeparse.y.
Bruno Wolff III
to the table function, thus preventing memory leakage accumulation across
calls. This means that SRFs need to be careful to distinguish permanent
and local storage; adjust code and documentation accordingly. Patch by
Joe Conway, very minor tweaks by Tom Lane.
array header, and to compute sizing and alignment of array elements
the same way normal tuple access operations do --- viz, using the
tupmacs.h macros att_addlength and att_align. This makes the world
safe for arrays of cstrings or intervals, and should make it much
easier to write array-type-polymorphic functions; as examples see
the cleanups of array_out and contrib/array_iterator. By Joe Conway
and Tom Lane.
with OPAQUE, as per recent pghackers discussion. I still want to do some
more work on the 'cstring' pseudo-type, but I'm going to commit the bulk
of the changes now before the tree starts shifting under me ...
snprintf() in contrib/. I didn't touch the places where pointer
arithmatic was being used, or other areas where the fix wasn't
trivial. I would think that few, if any, of the usages of sprintf()
were actually exploitable, but it's probably better to be paranoid...
Neil Conway
composite type capability makes it possible to create a system view
based on a table function in a way that is hopefully palatable to
everyone. The attached patch takes advantage of this, moving
show_all_settings() from contrib/tablefunc into the backend (renamed
all_settings(). It is defined as a builtin returning type RECORD. During
initdb a system view is created to expose the same information presently
available through SHOW ALL. For example:
test=# select * from pg_settings where name like '%debug%';
name | setting
-----------------------+---------
debug_assertions | on
debug_pretty_print | off
debug_print_parse | off
debug_print_plan | off
debug_print_query | off
debug_print_rewritten | off
wal_debug | 0
(7 rows)
Additionally during initdb two rules are created which make it possible
to change settings by updating the system view -- a "virtual table" as
Tom put it. Here's an example:
Joe Conway
Christopher Kings-Lynne wrote:
> I'm still getting ltree failures on 64bit freebsd:
>
> sed 's,MODULE_PATHNAME,$libdir/ltree,g' ltree.sql.in >ltree.sql
> gcc -pipe -O -g -Wall -Wmissing-prototypes -Wmissing-declarations -fpic -DPI
> C -DLOWER_NODE -I. -I../../src/include -c -o ltree_io.o ltree_io.c -MMD
> ltree_io.c: In function `ltree_in':
> ltree_io.c:57: warning: int format, different type arg (arg 3)
> ltree_io.c:63: warning: int format, different type arg (arg 4)
> ltree_io.c:68: warning: int format, different type arg (arg 3)
Teodor Sigaev
1. Reworked patch from Andrey Oktyabrski (ano@spider.ru) with
functions: icount, sort, sort_asc, uniq, idx, subarray
operations: #, +, -, |, &
FUNCTIONS:
int icount(int[]) - the number of elements in intarray
int[] sort(int[], 'asc' | 'desc') - sort intarray
int[] sort(int[]) - sort in ascending order
int[] sort_asc(int[]),sort_desc(int[]) - shortcuts for sort
int[] uniq(int[]) - returns unique elements
int idx(int[], int item) - returns index of first intarray matching element
to item, or '0' if matching failed.
int[] subarray(int[],int START [, int LEN]) - returns part of intarray
starting from element number START (from 1)
and length LEN.
OPERATIONS:
int[] && int[] - overlap - returns TRUE if arrays has at least one common elements.
int[] @ int[] - contains - returns TRUE if left array contains right array
int[] ~ int[] - contained - returns TRUE if left array is contained in right array
# int[] - return the number of elements in array
int[] + int - push element to array ( add to end of array)
int[] + int[] - merge of arrays (right array added to the end of left one)
int[] - int - remove entries matched by right argument from array
int[] - int[] - remove left array from right
int[] | int - returns intarray - union of arguments
int[] | int[] - returns intarray as a union of two arrays
int[] & int[] - returns intersection of arrays
Oleg Bartunov
has_language_privilege, has_schema_privilege to let SQL queries test
all the new privilege types in 7.3. Also, add functions pg_table_is_visible,
pg_type_is_visible, pg_function_is_visible, pg_operator_is_visible,
pg_opclass_is_visible to test whether objects contained in schemas are
visible in the current search path. Do some minor cleanup to centralize
accesses to pg_database, as well.
> please find attached patch to current CVS ( contrib/ltree)
> Version for 7.2 is distributed as separate package -
I believe that patch also intended to remove contrib/ltree/patch.72
code review by Tom Lane. Remaining issues: functions that take or
return tuple types are likely to break if one drops (or adds!)
a column in the table defining the type. Need to think about what
to do here.
Along the way: some code review for recent COPY changes; mark system
columns attnotnull = true where appropriate, per discussion a month ago.
three functions which exercise the tablefunc API.
show_all_settings()
- returns the same information as SHOW ALL, but as a query result
normal_rand(int numvals, float8 mean, float8 stddev, int seed)
- returns a set of normally distributed float8 values
- This routine implements Algorithm P (Polar method for normal
deviates) from Knuth's _The_Art_of_Computer_Programming_, Volume 2,
3rd ed., pages 122-126. Knuth cites his source as "The polar
method", G. E. P. Box, M. E. Muller, and G. Marsaglia,
_Annals_Math,_Stat._ 29 (1958), 610-611.
crosstabN(text sql)
- returns a set of row_name plus N category value columns
- crosstab2(), crosstab3(), and crosstab4() are defined for you,
but you can create additional crosstab functions per directions
in the README.
Joe Conway
documentation (xindex.sgml should be rewritten), need to teach pg_dump
about it, need to update contrib modules that currently build pg_opclass
entries by hand. Original patch by Bill Studenmund, grammar adjustments
and general update for 7.3 by Tom Lane.
bitmap, if present).
Per Tom Lane's suggestion the information whether a tuple has an oid
or not is carried in the tuple descriptor. For debugging reasons
tdhasoid is of type char, not bool. There are predefined values for
WITHOID, WITHOUTOID and UNDEFOID.
This patch has been generated against a cvs snapshot from last week
and I don't expect it to apply cleanly to current sources. While I
post it here for public review, I'm working on a new version against a
current snapshot. (There's been heavy activity recently; hope to
catch up some day ...)
This is a long patch; if it is too hard to swallow, I can provide it
in smaller pieces:
Part 1: Accessor macros
Part 2: tdhasoid in TupDesc
Part 3: Regression test
Part 4: Parameter withoid to heap_addheader
Part 5: Eliminate t_oid from HeapTupleHeader
Part 2 is the most hairy part because of changes in the executor and
even in the parser; the other parts are straightforward.
Up to part 4 the patched postmaster stays binary compatible to
databases created with an unpatched version. Part 5 is small (100
lines) and finally breaks compatibility.
Manfred Koizar
> Hi Tatsuo,
>
> I've attached a patch for the version of pgbench in CVS. It includes the
> following changes:
>
> - fix some spelling mistakes, indentation stuff, etc.
>
> - minor code cleanup -- (void) args instead of (), etc.
>
> - allocate the state array dynamically, so that it is only as
> large as needed. This reduces the memory consumption of pgbench
> slightly, and makes a larger MAXCLIENTS setting possible
>
> - (the only controversial change) add an option "-l" to log
> transaction latencies to a file. The "transaction latency"
> is the time between when the BEGIN is issued and the transaction
> commits. This is written to a file, along with the client #
> and the transaction #. The data in the file can then be used
> for things like:
>
> - consistency analysis: is the TPS the same through the
> entire run of pgbench, or does it change?
>
> - more detailed stats: what is the average latency, worse-case
> latency, best-case latency?
>
> - graphs: feed the data to gnuplot, graph latency versus. time
>
> - etc.
>
> I was going to store this data in memory and write it to disk
> at the end of the pgbench run, but that isn't feasible because
> the data can be very large: for example, ~70MB if benchmarking
> 128 clients doing 100,000 transactions each.
>
> Cheers,
>
> Neil
structure.
Now includes the following new fields:
integer/float date/time storage
maximum length of names (+1; they must also include a null termination)
maximum number of function arguments
maximum length of locale name
Copy this directory to contrib/dbsize in your PostgreSQL source tree.
Then just run make; make install. Finally, load the functions into any
database using dbsize.sql.
When computing the size of a table, it does not include TOAST or index
disk space.
Fixed bug with '=' operator for gist__int_ops and
define '=' operator for gist__intbig_ops opclass.
Now '=' operator is consistent with standard 'array' type.
Thanks Achilleus Mantzios for bug report and suggestion.
Oleg Bartunov
yesterday's proposal to pghackers. Also remove unnecessary parameters
to heap_beginscan, heap_rescan. I modified pg_proc.h to reflect the
new numbers of parameters for the AM interface routines, but did not
force an initdb because nothing actually looks at those fields.
per pghackers discussion. Add some more typsanity tests, and clean
up some problems exposed thereby (broken or missing array types for
some built-in types). Also, clean up loose ends from unknownin/out
patch.
postgres command line utilites e.g. supports -U, -p, -h, -?, -v, password
prompt and has a "test mode". In test mode, no large objects are removed,
just reported.
Mario Weilguni
objections.
Major changes:
- removed cursor wrap around input sql to allow for remote
execution of INSERT/UPDATE/DELETE
- dblink now returns a resource id instead of a real pointer
- added several utility functions
I'm still hoping to add explicit cursor open/fetch/close support before
7.3 is released, but I need a bit more time on that.
On a somewhat unrelated topic, I never got any feedback on the
unknownin/out patch and the mb_substring patch. Is there anything else I
need to do to get those applied?
Joe Conway
an 'opclass owner' column in pg_opclass. Nothing is done with it at
present, but since there are plans to invent a CREATE OPERATOR CLASS
command soon, we'll probably want DROP OPERATOR CLASS too, which
suggests that a notion of ownership would be a good idea.
sequence functions how to cope with qualified names. Same code is
also used for int4notin, currtid_byrelname, pgstattuple. Also,
move TOAST tables into special pg_toast namespace.
> > to perform sql command:
> > update pg_amop set amopreqcheck = true where amopclaid =
> > (select oid from pg_opclass where opcname = 'gist_txtidx_ops');
>
> Oleg, sorry, I don't understand where this should appear. In the README
> file, and if so, where? Is this something only for people upgrading
> from 7.2?
Sorry Bruce, I was unclear. I have attached patch to Readme.tsearch
Also, It'd be worth to mention in Changes to point users of tsearch
about importang upgrade notices.
Oleg Bartunov
> > to perform sql command:
> > update pg_amop set amopreqcheck = true where amopclaid =
> > (select oid from pg_opclass where opcname = 'gist_txtidx_ops');
>
> Oleg, sorry, I don't understand where this should appear. In the README
> file, and if so, where? Is this something only for people upgrading
> from 7.2?
Sorry Bruce, I was unclear. I have attached patch to Readme.tsearch
Also, It'd be worth to mention in Changes to point users of tsearch
about importang upgrade notices.
Oleg Bartunov