This commit improves the handling of the following clauses:
- Addition of "CREATE" for ALTER DEFAULT PRIVILEGES .. GRANT/REVOKE.
- Addition of GRANT|ADMIN|INHERIT OPTION FOR for REVOKE, with some
completion for roles, INHERIT being added recently by e3ce2de.
- Addition of GRANT WITH ADMIN|INHERIT.
The list of privilege options common to GRANT and REVOKE is refactored
to avoid its duplication.
Author: Shi Yu
Reviewed-by: Kyotaro Horiguchi, Michael Paquier, Peter Smith
Discussion: https://postgr.es/m/OSZPR01MB6310FCE8609185A56344EED2FD559@OSZPR01MB6310.jpnprd01.prod.outlook.com
This adds a new psql command \bind that sets query parameters and
causes the next query to be sent using the extended query protocol.
Example:
SELECT $1, $2 \bind 'foo' 'bar' \g
This may be useful for psql scripting, but one of the main purposes is
also to be able to test various aspects of the extended query protocol
from psql and to write tests more easily.
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/e8dd1cd5-0e04-3598-0518-a605159fe314@enterprisedb.com
- Add tab completion for ALTER SEQUENCE … START …
- Add tab completion for ALTER COLUMN … SET GENERATED …
- Add tab completion for ALTER COLUMN … SET <sequence option>
- Add tab completion for ALTER COLUMN … ADD GENERATED … AS IDENTITY
Author: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Matheus Alcantara <mths.dev@pm.me>
Discussion: https://www.postgresql.org/message-id/flat/87mta1jfax.fsf@wibble.ilmari.org
This improves the tab completion of psql on a few points:
- Provide a list of subscriptions on \dRs.
- Provide a list of publications on \dRp.
- Add CURRENT_ROLE, CURRENT_USER, SESSION_USER when OWNER TO is provided
at the end of a query (as defined by RoleSpec in gram.y).
Author: Vignesh C
Reviewed-by: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/CALDaNm3toRBt6c6saY3174f7CsGztXRvVvfWbikkJEXY7x5WAA@mail.gmail.com
I (Álvaro) broke tab-completion for GRANT .. ALL TABLES IN SCHEMA while
removing ALL from the publication syntax for schemas in the
aforementioned commit. I also missed to update a bunch of
tab-completion rules for ALTER/CREATE PUBLICATION that match each
individual piece of ALL TABLES IN SCHEMA. Repair those bugs.
While fixing up that commit, update a couple of outdated comments
related to the same change.
Backpatch to 15.
Author: Shi yu <shiy.fnst@fujitsu.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Discussion: https://postgr.es/m/OSZPR01MB6310FCE8609185A56344EED2FD559@OSZPR01MB6310.jpnprd01.prod.outlook.com
This may be a bit too subtle, but removing that word from there makes
this clause no longer a perfect parallel of the GRANT variant "ALL
TABLES IN SCHEMA": indeed, for publications what we record is the schema
itself, not the tables therein, which means that any tables added to the
schema in the future are also published. This is completely different
to what GRANT does, which is affect only the tables that exist when the
command is executed.
There isn't resounding support for this change, but there are a few
positive votes and no opposition. Because the time to 15 RC1 is very
short, let's get this out now.
Backpatch to 15.
Discussion: https://postgr.es/m/2729c9e2-9aac-8cda-f2f4-34f2bcc18f4e
Commit 7103ebb7aa added the tab-completion for MERGE accidentally
in the middle of that for LOCK TABLE. This commit fixes this issue.
This also adds some tab-completion for MERGE.
Back-patch to v15 where MERGE was introduced.
Author: Kotaro Kawamoto, Fujii Masao
Reviewed-by: Shinya Kato, Álvaro Herrera
Discussion: https://postgr.es/m/9f1ad2a87a58cd5e7d64f3993130958d@oss.nttdata.com
The setting controls tha maximum length of the header line in expanded
format output. Possible settings are full, column, page, or an integer.
the default is full, the current behaviour, and in this case the header
line is the length of the widest line of output. column causes the
header to be truncated to the width of the first column, page causes it
to be truncated to the width of the terminal page, and an integer causes
it to be truncated to that value. If the full value is less than the
page or integer value no truncation occurs. If given without an argument
this option prints its current setting.
Platon Pronko, somewhat modified by me.
Discussion: https://postgr.es/m/f03d38a3-db96-a56e-d1bc-dbbc80bbde4d@gmail.com
This patch adds a new SUBSCRIPTION parameter "origin". It specifies
whether the subscription will request the publisher to only send changes
that don't have an origin or send changes regardless of origin. Setting it
to "none" means that the subscription will request the publisher to only
send changes that have no origin associated. Setting it to "any" means
that the publisher sends changes regardless of their origin. The default
is "any".
Usage:
CREATE SUBSCRIPTION sub1 CONNECTION 'dbname=postgres port=9999'
PUBLICATION pub1 WITH (origin = none);
This can be used to avoid loops (infinite replication of the same data)
among replication nodes.
This feature allows filtering only the replication data originating from
WAL but for initial sync (initial copy of table data) we don't have such a
facility as we can only distinguish the data based on origin from WAL. As
a follow-up patch, we are planning to forbid the initial sync if the
origin is specified as none and we notice that the publication tables were
also replicated from other publishers to avoid duplicate data or loops.
We forbid to allow creating origin with names 'none' and 'any' to avoid
confusion with the same name options.
Author: Vignesh C, Amit Kapila
Reviewed-By: Peter Smith, Amit Kapila, Dilip Kumar, Shi yu, Ashutosh Bapat, Hayato Kuroda
Discussion: https://postgr.es/m/CALDaNm0gwjY_4HFxvvty01BOT01q_fJLKQ3pWP9=9orqubhjcQ@mail.gmail.com
By convention, the tab-complete subscription parameters are listed in the
COMPLETE_WITH lists in alphabetical order, but when the "disable_on_error"
parameter was introduced this was not done.
This patch just tidies that up.
Reported-by: Peter Smith
Author: Peter Smith
Reviewed-by: Euler Taveira, Takamichi Osumi
Backpatch-through: 15, where it was introduced
Discussion: https://postgr.es/m/CAHut+PucvKZgg_eJzUW--iL6DXHg1Jwj6F09tQziE3kUF67uLg@mail.gmail.com
After commit 662dbe2c8, psql tab completion didn't conveniently
support the case of "ALTER EXTENSION foo UPDATE". It'd always
add "TO", which is fine if you want to specify a target version
but not if you don't ... and surely the latter is the much more
common case.
To fix, remove "TO" from the initially offered completion; you now
need to press TAB one additional time to get that. We won't try to
duplicate the old behavior of attempting initial completion on the
target version along with TO. It's too squirrelly to get the quoting
right, and this is such an infrequent usage that it doesn't seem worth
expending a lot of effort and special code on.
Noted by Noah Misch. Back-patch to v15.
Discussion: https://postgr.es/m/20220703083217.GB2476530@rfd.leadboat.com
Second thoughts about 9cd43f6cb: given that we're staying bug-compatible
with the old behavior of using double not single quotes for extension
versions, we can simplify this completion code by pretending that
extension versions *are* identifiers, and not using VERBATIM. Then
_complete_from_query() will think that the query results are identifiers
in need of quoting, and we end up with the same behavior as before.
This doesn't work for Query_for_list_of_available_extension_versions_with_TO,
but let's just drop that: there is no other place where we handle
multi-keyword phrases that way, and it doesn't seem very desirable here
either. Handle completion of "UPDATE TO" in our more usual pattern.
Discussion: https://postgr.es/m/CAMkU=1yV+egSYrzWvbDY8VZ6bKEMrKbzxr-HTuiHi+wDgSUMgA@mail.gmail.com
In 02b8048ba I (tgl) got rid of the need for most tab-completion queries
to return pre-quoted identifiers. But I over-hastily removed the
quote_ident call from Query_for_list_of_available_extension_versions*
too; those still need it, because what is returned isn't an identifier
at all and will (almost?) always need quoting.
Arguably we should use quote_literal here instead. But quote_ident
works too and people may be used to that behavior, so stick with it.
In passing, fix inconsistent omission of schema-qualification in
Query_for_list_of_encodings. That's not a security issue per our
current guidelines, but it ought to be like the rest.
Jeff Janes
Discussion: https://postgr.es/m/CAMkU=1yV+egSYrzWvbDY8VZ6bKEMrKbzxr-HTuiHi+wDgSUMgA@mail.gmail.com
Input for these should be case-insensitive, but was not completely
so. Comparing to the similar queries for timezone names, I realized
that we'd missed forcing the comparison pattern to lower-case.
With that, it behaves as I expect.
While here, flatten the sub-selects in these queries; I don't
find that those add any readability.
Discussion: https://postgr.es/m/3369130.1649348542@sss.pgh.pa.us
Plain \dconfig is basically equivalent to SHOW except that you can
give it a pattern with wildcards, either to match multiple GUCs or
because you don't exactly remember the name you want.
\dconfig+ adds type, context, and access-privilege information,
mainly because every other kind of object privilege has a psql command
to show it, so GUC privileges should too. (A form of this command was
in some versions of the patch series leading up to commit a0ffa885e.
We pulled it out then because of doubts that the design and code were
up to snuff, but I think subsequent work has resolved that.)
In passing, fix incorrect completion of GUC names in GRANT/REVOKE
ON PARAMETER: a0ffa885e neglected to use the VERBATIM form of
COMPLETE_WITH_QUERY, so it misbehaved for custom (qualified) GUC
names.
Mark Dilger and Tom Lane
Discussion: https://postgr.es/m/3118455.1649267333@sss.pgh.pa.us
Add support for unlogged sequences. Unlike for unlogged tables, this
is not a performance feature. It allows sequences associated with
unlogged tables to be excluded from replication.
A new subcommand ALTER SEQUENCE ... SET LOGGED/UNLOGGED is added.
An identity/serial sequence now automatically gets and follows the
persistence level (logged/unlogged) of its owning table. (The
sequences owned by temporary tables were already temporary through the
separate mechanism in RangeVarAdjustRelationPersistence().) But you
can still change the persistence of an owned sequence separately.
Also, pg_dump and pg_upgrade preserve the persistence of existing
sequences.
Discussion: https://www.postgresql.org/message-id/flat/04e12818-2f98-257c-b926-2845d74ed04f%402ndquadrant.com
This patch allows "PGC_SUSET" parameters to be set by non-superusers
if they have been explicitly granted the privilege to do so.
The privilege to perform ALTER SYSTEM SET/RESET on a specific parameter
can also be granted.
Such privileges are cluster-wide, not per database. They are tracked
in a new shared catalog, pg_parameter_acl.
Granting and revoking these new privileges works as one would expect.
One caveat is that PGC_USERSET GUCs are unaffected by the SET privilege
--- one could wish that those were handled by a revocable grant to
PUBLIC, but they are not, because we couldn't make it robust enough
for GUCs defined by extensions.
Mark Dilger, reviewed at various times by Andrew Dunstan, Robert Haas,
Joshua Brindle, and myself
Discussion: https://postgr.es/m/3D691E20-C1D5-4B80-8BA5-6BEB63AF3029@enterprisedb.com
Previously, psql printed only the last result if a command string
returned multiple result sets. Now it prints all of them. The
previous behavior can be obtained by setting the psql variable
SHOW_ALL_RESULTS to off.
This is a significantly enhanced version of
3a51306722 (that was later reverted).
There is also much more test coverage for various psql features now.
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: "Iwata, Aya" <iwata.aya@jp.fujitsu.com> (earlier version)
Reviewed-by: Daniel Verite <daniel@manitou-mail.org> (earlier version)
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com> (earlier version)
Reviewed-by: vignesh C <vignesh21@gmail.com> (earlier version)
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.21.1904132231510.8961@lancre
This is essentially the same as applying VACUUM FULL to a partitioned
table, which has been supported since commit 3c3bb99330 (March 2017).
While there's no great use case in applying CLUSTER to partitioned
tables, we don't have any strong reason not to allow it either.
For now, partitioned indexes cannot be marked clustered, so an index
must always be specified.
While at it, rename some variables that were RangeVars during the
development that led to 8bc717cb88 but never made it that way to the
source tree; there's no need to perpetuate names that have always been
more confusing than helpful.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/20201028003312.GU9241@telsasoft.com
Discussion: https://postgr.es/m/20200611153502.GT14879@telsasoft.com
Because this strategy logs changes on a block-by-block basis, it
avoids the need to checkpoint before and after the operation.
However, because it logs each changed block individually, it might
generate a lot of extra write-ahead logging if the template database
is large. Therefore, the older strategy remains available via a new
STRATEGY parameter to CREATE DATABASE, and a corresponding --strategy
option to createdb.
Somewhat controversially, this patch assembles the list of relations
to be copied to the new database by reading the pg_class relation of
the template database. Cross-database access like this isn't normally
possible, but it can be made to work here because there can't be any
connections to the database being copied, nor can it contain any
in-doubt transactions. Even so, we have to use lower-level interfaces
than normal, since the table scan and relcache interfaces will not
work for a database to which we're not connected. The advantage of
this approach is that we do not need to rely on the filesystem to
determine what ought to be copied, but instead on PostgreSQL's own
knowledge of the database structure. This avoids, for example,
copying stray files that happen to be located in the source database
directory.
Dilip Kumar, with a fairly large number of cosmetic changes by me.
Reviewed and tested by Ashutosh Sharma, Andres Freund, John Naylor,
Greg Nancarrow, Neha Sharma. Additional feedback from Bruce Momjian,
Heikki Linnakangas, Julien Rouhaud, Adam Brusselback, Kyotaro
Horiguchi, Tomas Vondra, Andrew Dunstan, Álvaro Herrera, and others.
Discussion: http://postgr.es/m/CA+TgmoYtcdxBjLh31DLxUXHxFVMPGzrU5_T=CYCvRyFHywSBUQ@mail.gmail.com
MERGE performs actions that modify rows in the target table using a
source table or query. MERGE provides a single SQL statement that can
conditionally INSERT/UPDATE/DELETE rows -- a task that would otherwise
require multiple PL statements. For example,
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular tables, partitioned tables and inheritance
hierarchies, including column and row security enforcement, as well as
support for row and statement triggers and transition tables therein.
MERGE is optimized for OLTP and is parameterizable, though also useful
for large scale ETL/ELT. MERGE is not intended to be used in preference
to existing single SQL commands for INSERT, UPDATE or DELETE since there
is some overhead. MERGE can be used from PL/pgSQL.
MERGE does not support targetting updatable views or foreign tables, and
RETURNING clauses are not allowed either. These limitations are likely
fixable with sufficient effort. Rewrite rules are also not supported,
but it's not clear that we'd want to support them.
Author: Pavan Deolasee <pavan.deolasee@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Simon Riggs <simon.riggs@enterprisedb.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions)
Reviewed-by: Peter Geoghegan <pg@bowt.ie> (earlier versions)
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Reviewed-by: Japin Li <japinli@hotmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
Discussion: https://postgr.es/m/20201231134736.GA25392@alvherre.pgsql
This commit adds support for decoding of sequences to the built-in
replication (the infrastructure was added by commit 0da92dc530).
The syntax and behavior mostly mimics handling of tables, i.e. a
publication may be defined as FOR ALL SEQUENCES (replicating all
sequences in a database), FOR ALL SEQUENCES IN SCHEMA (replicating
all sequences in a particular schema) or individual sequences.
To publish sequence modifications, the publication has to include
'sequence' action. The protocol is extended with a new message,
describing sequence increments.
A new system view pg_publication_sequences lists all the sequences
added to a publication, both directly and indirectly. Various psql
commands (\d and \dRp) are improved to also display publications
including a given sequence, or sequences included in a publication.
Author: Tomas Vondra, Cary Huang
Reviewed-by: Peter Eisentraut, Amit Kapila, Hannu Krosing, Andres
Freund, Petr Jelinek
Discussion: https://postgr.es/m/d045f3c2-6cfb-06d3-5540-e63c320df8bc@enterprisedb.com
Discussion: https://postgr.es/m/1710ed7e13b.cd7177461430746.3372264562543607781@highgo.ca
This feature allows skipping the transaction on subscriber nodes.
If incoming change violates any constraint, logical replication stops
until it's resolved. Currently, users need to either manually resolve the
conflict by updating a subscriber-side database or by using function
pg_replication_origin_advance() to skip the conflicting transaction. This
commit introduces a simpler way to skip the conflicting transactions.
The user can specify LSN by ALTER SUBSCRIPTION ... SKIP (lsn = XXX),
which allows the apply worker to skip the transaction finished at
specified LSN. The apply worker skips all data modification changes within
the transaction.
Author: Masahiko Sawada
Reviewed-by: Takamichi Osumi, Hou Zhijie, Peter Eisentraut, Amit Kapila, Shi Yu, Vignesh C, Greg Nancarrow, Haiying Tang, Euler Taveira
Discussion: https://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
b048326 has added support for SET ACCESS METHOD in ALTER TABLE, but it
has missed a few things for materialized views:
- No documentation for this clause on the ALTER MATERIALIZED VIEW page.
- psql tab completion missing.
- No regression tests.
This commit closes the gap on all the points listed above.
Author: Yugo Nagata
Discussion: https://postgr.es/m/20220316133337.5dc9740abfa24c25ec9f67f5@sraoss.co.jp
This adds the option to use ICU as the default locale provider for
either the whole cluster or a database. New options for initdb,
createdb, and CREATE DATABASE are used to select this.
Since some (legacy) code still uses the libc locale facilities
directly, we still need to set the libc global locale settings even if
ICU is otherwise selected. So pg_database now has three
locale-related fields: the existing datcollate and datctype, which are
always set, and a new daticulocale, which is only set if ICU is
selected. A similar change is made in pg_collation for consistency,
but in that case, only the libc-related fields or the ICU-related
field is set, never both.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5e756dd6-0e91-d778-96fd-b1bcb06c161a%402ndquadrant.com
Logical replication apply workers for a subscription can easily get stuck
in an infinite loop of attempting to apply a change, triggering an error
(such as a constraint violation), exiting with the error written to the
subscription server log, and restarting.
To partially remedy the situation, this patch adds a new subscription
option named 'disable_on_error'. To be consistent with old behavior, this
option defaults to false. When true, both the tablesync worker and apply
worker catch any errors thrown and disable the subscription in order to
break the loop. The error is still also written in the logs.
Once the subscription is disabled, users can either manually resolve the
conflict/error or skip the conflicting transaction by using
pg_replication_origin_advance() function. After resolving the conflict,
users need to enable the subscription to allow apply process to proceed.
Author: Osumi Takamichi and Mark Dilger
Reviewed-by: Greg Nancarrow, Vignesh C, Amit Kapila, Wang wei, Tang Haiying, Peter Smith, Masahiko Sawada, Shi Yu
Discussion : https://postgr.es/m/DB35438F-9356-4841-89A0-412709EBD3AB%40enterprisedb.com
This feature adds row filtering for publication tables. When a publication
is defined or modified, an optional WHERE clause can be specified. Rows
that don't satisfy this WHERE clause will be filtered out. This allows a
set of tables to be partially replicated. The row filter is per table. A
new row filter can be added simply by specifying a WHERE clause after the
table name. The WHERE clause must be enclosed by parentheses.
The row filter WHERE clause for a table added to a publication that
publishes UPDATE and/or DELETE operations must contain only columns that
are covered by REPLICA IDENTITY. The row filter WHERE clause for a table
added to a publication that publishes INSERT can use any column. If the
row filter evaluates to NULL, it is regarded as "false". The WHERE clause
only allows simple expressions that don't have user-defined functions,
user-defined operators, user-defined types, user-defined collations,
non-immutable built-in functions, or references to system columns. These
restrictions could be addressed in the future.
If you choose to do the initial table synchronization, only data that
satisfies the row filters is copied to the subscriber. If the subscription
has several publications in which a table has been published with
different WHERE clauses, rows that satisfy ANY of the expressions will be
copied. If a subscriber is a pre-15 version, the initial table
synchronization won't use row filters even if they are defined in the
publisher.
The row filters are applied before publishing the changes. If the
subscription has several publications in which the same table has been
published with different filters (for the same publish operation), those
expressions get OR'ed together so that rows satisfying any of the
expressions will be replicated.
This means all the other filters become redundant if (a) one of the
publications have no filter at all, (b) one of the publications was
created using FOR ALL TABLES, (c) one of the publications was created
using FOR ALL TABLES IN SCHEMA and the table belongs to that same schema.
If your publication contains a partitioned table, the publication
parameter publish_via_partition_root determines if it uses the partition's
row filter (if the parameter is false, the default) or the root
partitioned table's row filter.
Psql commands \dRp+ and \d <table-name> will display any row filters.
Author: Hou Zhijie, Euler Taveira, Peter Smith, Ajin Cherian
Reviewed-by: Greg Nancarrow, Haiying Tang, Amit Kapila, Tomas Vondra, Dilip Kumar, Vignesh C, Alvaro Herrera, Andres Freund, Wei Wang
Discussion: https://www.postgresql.org/message-id/flat/CAHE3wggb715X%2BmK_DitLXF25B%3DjE6xyNCH4YOwM860JR7HarGQ%40mail.gmail.com
This adds to database objects the same version tracking that collation
objects have. There is a new pg_database column datcollversion that
stores the version, a new function
pg_database_collation_actual_version() to get the version from the
operating system, and a new subcommand ALTER DATABASE ... REFRESH
COLLATION VERSION.
This was not originally added together with pg_collation.collversion,
since originally version tracking was only supported for ICU, and ICU
on a database-level is not currently supported. But we now have
version tracking for glibc (since PG13), FreeBSD (since PG14), and
Windows (since PG13), so this is useful to have now.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/f0ff3190-29a3-5b39-a179-fa32eee57db6%40enterprisedb.com
The behavior I proposed, of matching case only when only keywords
are available to complete, turns out to be too cute. It adds about
as many problems as it removes. Simplify down to ilmari's original
proposal of just always matching case when completing a keyword.
Also, I noticed while testing this that we've pessimized the behavior
for qualified GUC names: the code is insisting that they be
double-quoted, which was not the case before. Fix that by treating
GUC names as verbatim matches instead of possibly-schema-qualified
names. (While it's tempting to try to split qualified GUC names
so that we *could* treat them with the schema-qualified-name code
path, that really isn't going to work in light of guc.c's willingness
to allow more than two name components.)
Dagfinn Ilmari Mannsåker and Tom Lane
Discussion: https://postgr.es/m/445692.1644018081@sss.pgh.pa.us
The comment for PGAC_READLINE_VARIABLES says "Readline versions < 2.1
don't have rl_completion_append_character". It seems certain that such
versions are extinct in the wild, though; for sure there are none in the
buildfarm. Libedit has had this variable for at least twenty years too.
Also, tab-complete.c's behavior without it is quite unfriendly, since
we'll emit a space even when completion fails; but we've had no
complaints about that.
Therefore, let's assume this variable is always there, and drop the
configure check to save a few build cycles.
Discussion: https://postgr.es/m/147685.1643858911@sss.pgh.pa.us
When completing keywords that are offered alongside names obtained
from a query, preserve the user's choice of keyword case. This
would have been messy to do before 02b8048ba, but now it's fairly
simple. A complication is that we want keywords to be shown in
upper case in any tab-completion menus that include both keywords
and non-keywords, so we can't switch their case until enough has
been typed that only keyword(s) remain to be chosen.
Also, adjust some places where 02b8048ba thoughtlessly held over
a previous choice to display keywords in lower case. (I think
I got confused as to whether those words were keywords or variable
names, but they're the former.)
Dagfinn Ilmari Mannsåker and Tom Lane
Discussion: https://postgr.es/m/8735l41ynm.fsf@wibble.ilmari.org
This patch improves tab completion's ability to deal with
valid variant spellings of SQL identifiers. Notably:
* Unquoted upper-case identifiers are now downcased as the backend
would do, allowing them to be completed correctly.
* Tab completion can now match identifiers that are quoted even
though they don't need to be; for example "f<TAB> now completes
to "foo" if that's the only available name. Previously, only
names that require quotes would be offered.
* Schema-qualified identifiers are now supported where SQL syntax
allows it; many lesser-used completion rules neglected this.
* Completion operations that refer back to some previously-typed
name (for example, to complete names of columns belonging to a
previously-mentioned table) now allow variant spellings of the
previous name too.
In addition, performance of tab completion queries has been
improved for databases containing many objects, although
you'd only be likely to notice with a heavily-loaded server.
Authors of future tab-completion patches should note that this
commit changes many details about how tab completion queries
must be written:
* Tab completion queries now deal in raw object names; do not
use quote_ident().
* The name-matching restriction in a query must now be written
as "outputcol LIKE '%s'", not "substring(outputcol,1,%d)='%s'".
* The SchemaQuery mechanism has been extended so that it can
handle queries that refer back to a previous name. Most completion
queries that do that should be converted to SchemaQuery form.
Only consider using a literal query if the previous name can
never be schema-qualified. Don't use a literal query if the
name-to-be-completed can validly be schema-qualified, either.
* Use set_completion_reference() to specify which word is the previous
name to consider, for either a SchemaQuery or a literal query.
* If you want to offer some keywords in addition to a query result
(for example, offer COLUMN in addition to column names after
"ALTER TABLE t RENAME"), do not use the old hack of tacking the
keywords on with UNION. Instead use the new QUERY_PLUS macros
to write such keywords separately from the query proper. The
"addon" macro arguments that used to be used for this purpose
are gone.
* If your query returns something that's not a SQL identifier
(such as an attribute number or enum label), use the new
QUERY_VERBATIM macros to prevent the result from incorrectly
getting double-quoted. You may still need to use quote_literal
in such a query, too.
Tom Lane and Haiying Tang
Discussion: https://postgr.es/m/a63cbd45e3884cf9b3961c2a6a95dcb7@G08CNEXMBPEKD05.g08.fujitsu.local
Commit 9a974cbcba arranged to preserve
relfilenodes and tablespace OIDs. For similar reasons, also arrange
to preserve database OIDs.
One problem is that, up until now, the OIDs assigned to the template0
and postgres databases have not been fixed. This could be a problem
when upgrading, because pg_upgrade might try to migrate a database
from the old cluster to the new cluster while keeping the OID and find
a different database with that OID, resulting in a failure. If it finds
a database with the same name and the same OID that's OK: it will be
dropped and recreated. But the same OID and a different name is a
problem.
To prevent that, fix the OIDs for postgres and template0 to specific
values less than 16384. To avoid running afoul of this rule, these
values should not be changed in future releases. It's not a problem
that these OIDs aren't fixed in existing releases, because the OIDs
that we're assigning here weren't used for either of these databases
in any previous release. Thus, there's no chance that an upgrade of
a cluster from any previous release will collide with the OIDs we're
assigning here. And going forward, the OIDs will always be fixed, so
the only potential collision is with a system database having the
same name and the same OID, which is OK.
This patch lets users assign a specific OID to a database as well,
provided however that it can't be less than 16384. I (rhaas) thought
it might be better not to expose this capability to users, but the
consensus was otherwise, so the syntax is documented. Letting users
assign OIDs below 16384 would not be OK, though, because a
user-created database with a low-numbered OID might collide with a
system-created database in a future release. We therefore prohibit
that.
Shruthi KC, based on an earlier patch from Antonin Houska, reviewed
and with some adjustments by me.
Discussion: http://postgr.es/m/CA+TgmoYgTwYcUmB=e8+hRHOFA0kkS6Kde85+UNdon6q7bt1niQ@mail.gmail.com
Discussion: http://postgr.es/m/CAASxf_Mnwm1Dh2vd5FAhVX6S1nwNSZUB1z12VddYtM++H2+p7w@mail.gmail.com