Be a little more vocal about the risks of remote collations not
matching local ones. Actually fixing these risks seems hard,
and I've given up on the idea that it might be back-patchable.
So the best we can do for the back branches is add documentation.
Per discussion of bug #16583 from Jiří Fejfar.
Discussion: https://postgr.es/m/2438715.1632510693@sss.pgh.pa.us
OpenSSL 3 introduced the concept of providers to support modularization,
and moved the outdated ciphers to the new legacy provider. In case it's
not loaded in the users openssl.cnf file there will be a lot of regress
test failures, so add alternative outputs covering those.
Also document the need to load the legacy provider in order to use older
ciphers with OpenSSL-enabled pgcrypto.
This will be backpatched to all supported version once there is sufficient
testing in the buildfarm of OpenSSL 3.
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/FEF81714-D479-4512-839B-C769D2605F8A@yesql.se
Index vacuums may happen multiple times depending on the number of dead
tuples stored, as of maintenance_work_mem for a manual VACUUM. For
autovacuum, this is controlled by autovacuum_work_mem instead, if set.
The documentation mentioned the former, but not the latter in the
context of autovacuum.
Reported-by: Nikolai Berkoff
Author: Laurenz Albe, Euler Taveira
Discussion: https://postgr.es/m/161545365522.10134.12195402324485546870@wrigleys.postgresql.org
Backpatch-through: 9.6
Improve various item descriptions. Rearrange some things into
(IMO) more logical order. Fix missing markup and dubious
choices of link destinations. Drop a couple of items that
were later back-patched or otherwise don't seem to need
to be documented here.
The available refresh options are specified as refresh_options under
REFRESH PUBLICATION, and DROP PUBLICATION itself has an option named
refresh. Clarify what we mean by refresh options to avoid confusion.
Backpatch through v14 where ALTER SUBSCRIPTION ... DROP PUBLICATION
was introduced.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Discussion: https://postgr.es/m/CAD21AoCm1wJ3A8Q9EmBjRbShYkJ+o+Oa_z9O0hvwhvhUa2BSyg@mail.gmail.com
Backpatch-through: 14
Formerly, we sent signals for outgoing NOTIFY messages within
ProcessCompletedNotifies, which was also responsible for sending
relevant ones of those messages to our connected client. It therefore
had to run during the main-loop processing that occurs just before
going idle. This arrangement had two big disadvantages:
* Now that procedures allow intra-command COMMITs, it would be
useful to send NOTIFYs to other sessions immediately at COMMIT
(though, for reasons of wire-protocol stability, we still shouldn't
forward them to our client until end of command).
* Background processes such as replication workers would not send
NOTIFYs at all, since they never execute the client communication
loop. We've had requests to allow triggers running in replication
workers to send NOTIFYs, so that's a problem.
To fix these things, move transmission of outgoing NOTIFY signals
into AtCommit_Notify, where it will happen during CommitTransaction.
Also move the possible call of asyncQueueAdvanceTail there, to
ensure we don't bloat the async SLRU if a background worker sends
many NOTIFYs with no one listening.
We can also drop the call of asyncQueueReadAllNotifications,
allowing ProcessCompletedNotifies to go away entirely. That's
because commit 790026972 added a call of ProcessNotifyInterrupt
adjacent to PostgresMain's call of ProcessCompletedNotifies,
and that does its own call of asyncQueueReadAllNotifications,
meaning that we were uselessly doing two such calls (inside two
separate transactions) whenever inbound notify signals coincided
with an outbound notify. We need only set notifyInterruptPending
to ensure that ProcessNotifyInterrupt runs, and we're done.
The existing documentation suggests that custom background workers
should call ProcessCompletedNotifies if they want to send NOTIFY
messages. To avoid an ABI break in the back branches, reduce it
to an empty routine rather than removing it entirely. Removal
will occur in v15.
Although the problems mentioned above have existed for awhile,
I don't feel comfortable back-patching this any further than v13.
There was quite a bit of churn in adjacent code between 12 and 13.
At minimum we'd have to also backpatch 51004c717, and a good deal
of other adjustment would also be needed, so the benefit-to-risk
ratio doesn't look attractive.
Per bug #15293 from Michael Powers (and similar gripes from others).
Artur Zakirov and Tom Lane
Discussion: https://postgr.es/m/153243441449.1404.2274116228506175596@wrigleys.postgresql.org
Commit 6c3ffd6 added a couple new predefined roles but didn't properly
wrap the SQL commands mentioned in the description of those roles with
command tags, so add them now.
Backpatch-through: 14
Reported-by: Michael Banck
Discussion: https://postgr.es/m/606d8b1c.1c69fb81.3df04.1a99@mx.google.com
The current refresh behavior tries to just refresh added/dropped
publications but that leads to removing wrong tables from subscription. We
can't refresh just the dropped publication because it is quite possible
that some of the tables are removed from publication by that time and now
those will remain as part of the subscription. Also, there is a chance
that the tables that were part of the publication being dropped are also
part of another publication, so we can't remove those.
So, we decided that by default, add/drop commands will also act like
REFRESH PUBLICATION which means they will refresh all the publications. We
can keep the old behavior for "add publication" but it is better to be
consistent with "drop publication".
Author: Hou Zhijie
Reviewed-by: Masahiko Sawada, Amit Kapila
Backpatch-through: 14, where it was introduced
Discussion: https://postgr.es/m/OS0PR01MB5716935D4C2CC85A6143073F94EF9@OS0PR01MB5716.jpnprd01.prod.outlook.com
Using --quiet in combination with --no-strict-names didn't work as
documented, a warning message was still emitted. Since the --quiet
flag was working in an unconventional way to other utilities, fix
by removing the functionality instead.
Backpatch through 14 where pg_amcheck was introduced.
Bug: 17148
Reported-by: Chen Jiaoqian <chenjq.jy@fujitsu.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/17148-b5087318e2b04fc6@postgresql.org
Backpatch-through: 14
This reverts the following commits:
1b5617eb84 Describe (auto-)analyze behavior for partitioned tables
0e69f705cc Set pg_class.reltuples for partitioned tables
41badeaba8 Document ANALYZE storage parameters for partitioned tables
0827e8af70 autovacuum: handle analyze for partitioned tables
There are efficiency issues in this code when handling databases with
large numbers of partitions, and it doesn't look like there isn't any
trivial way to handle those. There are some other issues as well. It's
now too late in the cycle for nontrivial fixes, so we'll have to let
Postgres 14 users continue to manually deal with ANALYZE their
partitioned tables, and hopefully we can fix the issues for Postgres 15.
I kept [most of] be280cdad2 ("Don't reset relhasindex for partitioned
tables on ANALYZE") because while we added it due to 0827e8af70, it is
a good bugfix in its own right, since it affects manual analyze as well
as autovacuum-induced analyze, and there's no reason to revert it.
I retained the addition of relkind 'p' to tables included by
pg_stat_user_tables, because reverting that would require a catversion
bump.
Also, in pg14 only, I keep a struct member that was added to
PgStat_TabStatEntry to avoid breaking compatibility with existing stat
files.
Backpatch to 14.
Discussion: https://postgr.es/m/20210722205458.f2bug3z6qzxzpx2s@alap3.anarazel.de
The check for sslsni only checked for existence of the parameter
but not for the actual value of the param. This meant that the
SNI extension was always turned on. Fix by inspecting the value
of sslsni and only activate the SNI extension iff sslsni has been
enabled. Also update the docs to be more in line with how other
boolean params are documented.
Backpatch to 14 where sslsni was first implemented.
Reviewed-by: Tom Lane
Backpatch-through: 14, where sslni was added
In ec34040af I added a mention that there was no point in setting
maintenance_work_limit to anything higher than 1GB for vacuum, but that
was incorrect as ginInsertCleanup() also looks at what
maintenance_work_mem is set to during VACUUM and that's not limited to
1GB.
Here I attempt to make it more clear that the limitation is only around
the number of dead tuple identifiers that we can collect during VACUUM.
I've also added a note to autovacuum_work_mem to mention this limitation.
I didn't do that in ec34040af as I'd had some wrong-headed ideas about
just limiting the maximum value for that GUC to 1GB.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvpGwOAvunp-E-bN_rbAs3hmxMoasm5pzkYDbf36h73s7w@mail.gmail.com
Backpatch-through: 9.6, same as ec34040af
Since commit e462856a7a, pg_upgrade automatically creates a script to
update extensions, so mention that instead of ALTER EXTENSION.
Backpatch-through: 9.6
Copy-and-pasteo in 665c5855e, evidently. The 9.6 docs toolchain
whined about duplicate index entries, though our modern toolchain
doesn't. In any case, these GUCs surely are not about the
default settings of these values.
postgres_fdw imported generated columns from the remote tables as plain
columns, and caused failures like "ERROR: cannot insert a non-DEFAULT
value into column "foo"" when inserting into the foreign tables, as it
tried to insert values into the generated columns. To fix, we do the
following under the assumption that generated columns in a postgres_fdw
foreign table are defined so that they represent generated columns in
the underlying remote table:
* Send DEFAULT for the generated columns to the foreign server on insert
or update, not generated column values computed on the local server.
* Add to postgresImportForeignSchema() an option "import_generated" to
include column generated expressions in the definitions of foreign
tables imported from a foreign server. The option is true by default.
The assumption seems reasonable, because that would make a query of the
postgres_fdw foreign table return values for the generated columns that
are consistent with the generated expression.
While here, fix another issue in postgresImportForeignSchema(): it tried
to include column generated expressions as column default expressions in
the foreign table definitions when the import_default option was enabled.
Per bug #16631 from Daniel Cherniy. Back-patch to v12 where generated
columns were added.
Discussion: https://postgr.es/m/16631-e929fe9db0ffc7cf%40postgresql.org
It wasn't all that clear which lock levels, if any, would be held on the
DEFAULT partition during an ATTACH PARTITION operation.
Also, clarify which locks will be taken if the DEFAULT partition or the
table being attached are themselves partitioned tables.
Here I'm only backpatching to v12 as before then we obtained an ACCESS
EXCLUSIVE lock on the partitioned table. It seems much less relevant to
mention which locks are taken on other tables when the partitioned table
itself is locked with an ACCESS EXCLUSIVE lock.
Author: Matthias van de Meent, David Rowley
Discussion: https://postgr.es/m/CAEze2WiTB6iwrV8W_J=fnrnZ7fowW3qu-8iQ8zCHP3FiQ6+o-A@mail.gmail.com
Backpatch-through: 12
The error messages using the word "non-negative" are confusing
because it's ambiguous about whether it accepts zero or not.
This commit improves those error messages by replacing it with
less ambiguous word like "greater than zero" or
"greater than or equal to zero".
Also this commit added the note about the word "non-negative" to
the error message style guide, to help writing the new error messages.
When postgres_fdw option fetch_size was set to zero, previously
the error message "fetch_size requires a non-negative integer value"
was reported. This error message was outright buggy. Therefore
back-patch to all supported versions where such buggy error message
could be thrown.
Reported-by: Hou Zhijie
Author: Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/OS0PR01MB5716415335A06B489F1B3A8194569@OS0PR01MB5716.jpnprd01.prod.outlook.com
Add pg_resetxlog -u option to set the oldest xid in pg_control.
Previously -x set this value be -2 billion less than the -x value.
However, this causes the server to immediately scan all relation's
relfrozenxid so it can advance pg_control's oldest xid to be inside the
autovacuum_freeze_max_age range, which is inefficient and might disrupt
diagnostic recovery. pg_upgrade will use this option to better create
the new cluster to match the old cluster.
Reported-by: Jason Harvey, Floris Van Nee
Discussion: https://postgr.es/m/20190615183759.GB239428@rfd.leadboat.com, 87da83168c644fd9aae38f546cc70295@opammb0562.comp.optiver.com
Author: Bertrand Drouvot
Backpatch-through: 9.6
It has been spotted that multiranges lack of ability to decompose them into
individual ranges. Subscription and proper expanded object representation
require substantial work, and it's too late for v14. This commit
provides the implementation of unnest(multirange), which is quite trivial.
unnest(multirange) is defined as a polymorphic procedure.
Catversion is bumped.
Reported-by: Jonathan S. Katz
Discussion: https://postgr.es/m/flat/60258efe-bd7e-4886-82e1-196e0cac5433%40postgresql.org
Author: Alexander Korotkov
Reviewed-by: Justin Pryzby, Jonathan S. Katz, Zhihong Yu, Tom Lane
Reviewed-by: Alvaro Herrera
We had documentation of default_transaction_isolation et al,
but for some reason not of transaction_isolation et al.
AFAICS this is just an ancient oversight, so repair.
Per bug #17077 from Yanliang Lei.
Discussion: https://postgr.es/m/17077-ade8e166a01e1374@postgresql.org
Ensure to properly mark up function parameters in text with <parameter>,
avoid using <acronym> for terms which aren't acronyms and properly place
the ", and" in a value list. The acronym removal is a follow-up to commit
fb72a7b8c3 which removed it for minmax-multi. In passing, also fix an
incorrectly cased word.
Author: Ekaterina Kiryanova <e.kiryanova@postgrespro.ru>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/c050ecbc-80b2-b360-3c1d-9fe6a6a11bb5@postgrespro.ru
Backpatch-through: v14
"Result Cache" was never a great name for this node, but nobody managed
to come up with another name that anyone liked enough. That was until
David Johnston mentioned "Node Memoization", which Tom Lane revised to
just "Memoize". People seem to like "Memoize", so let's do the rename.
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/20210708165145.GG1176@momjian.us
Backpatch-through: 14, where Result Cache was introduced
When sending queries in pipeline mode, we were careless about leaving
the connection in the right state so that PQgetResult would behave
correctly; trying to read further results after sending a query after
having read a result with an error would sometimes hang. Fix by
ensuring internal libpq state is changed properly. All the state
changes were being done by the callers of pqAppendCmdQueueEntry(); it
would have become too repetitious to have this logic in each of them, so
instead put it all in that function and relieve callers of the
responsibility.
Add a test to verify this case. Without the code fix, this new test
hangs sometimes.
Also, document that PQisBusy() would return false when no queries are
pending result. This is not intuitively obvious, and NULL would be
obtained by calling PQgetResult() at that point, which is confusing.
Wording by Boris Kolpackov.
In passing, fix bogus use of "false" to mean "0", per Ranier Vilela.
Backpatch to 14.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Boris Kolpackov <boris@codesynthesis.com>
Discussion: https://postgr.es/m/boris.20210624103805@codesynthesis.com
This commit fixes wrong wording like "a fewer kinds"
in the description about track_planning option.
Back-patch to v13 where pg_stat_statements.track_planning was added.
Author: Justin Pryzby
Reviewed-by: Julien Rouhaud, Fujii Masao
Discussion: https://postgr.es/m/20210418233615.GB7256@telsasoft.com
Previously the values such as '100$%$#$#', '9,223,372,' were accepted and
treated as valid integers for postgres_fdw options batch_size and fetch_size.
Whereas this is not the case with fdw_startup_cost and fdw_tuple_cost options
for which an error is thrown. This was because endptr was not used
while converting strings to integers using strtol.
This commit changes the logic so that it uses parse_int function
instead of strtol as it serves the purpose by returning false in case
if it is unable to convert the string to integer. Note that
this function also rounds off the values such as '100.456' to 100 and
'100.567' or '100.678' to 101.
While on this, use parse_real for fdw_startup_cost and fdw_tuple_cost options.
Since parse_int and parse_real are being used for reloptions and GUCs,
it is more appropriate to use in postgres_fdw rather than using strtol
and strtod directly.
Back-patch to v14.
Author: Bharath Rupireddy
Reviewed-by: Ashutosh Bapat, Tom Lane, Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACVMO6wY5Pc4oe1OCgUOAtdjHuFsBDw8R5uoYR86eWFQDA@mail.gmail.com
These are the same as world and install-world respectively, but without
building or installing the documentation. There are many reasons for
wanting to be able to do this, including speed, lack of documentation
building tools, and wanting to build other formats of the documentation.
Plans for simplifying the buildfarm client code include using these
targets.
Backpatch to all live branches.
Discussion: https://postgr.es/m/6a421136-d462-b043-a8eb-e75b2861f3df@dunslane.net
Commit 4656e3d66 replaced the "#define CLOBBER_CACHE_ALWAYS"
testing mechanism with a GUC, which has been a great help for
doing cache-clobber testing in more efficient ways; but there
is a gap in the implementation. The only way to do cache-clobber
testing during an initdb run is to use the old method with #define,
because one can't set the GUC from outside. Improve this by
adding a switch to initdb for the purpose.
(Perhaps someday we should let initdb pass through arbitrary
"-c NAME=VALUE" switches. Quoting difficulties dissuaded me
from attempting that right now, though.)
Back-patch to v14 where 4656e3d66 came in.
Discussion: https://postgr.es/m/1582507.1624227029@sss.pgh.pa.us
This new libpq function allows the application to send an 'H' message,
which instructs the server to flush its outgoing buffer.
This hasn't been needed so far because the Sync message already requests
a buffer; and I failed to realize that this was needed in pipeline mode
because PQpipelineSync also causes the buffer to be flushed. However,
sometimes it is useful to request a flush without establishing a
synchronization point.
Backpatch to 14, where pipeline mode was introduced in libpq.
Reported-by: Boris Kolpackov <boris@codesynthesis.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/202106252350.t76x73nt643j@alvherre.pgsql
The setting has no effect except during startup. It's still nice to be
able to change it dynamically, which is expected to be pretty useful to
an admin following crash recovery when restarting the cluster is not so
appealing.
Per discussions following commits 2941138e6 and 61752afb2.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20210529192321.GM2082%40telsasoft.com
ALTER SUBSCRIPTION DROP PUBLICATION does not actually support
copy_data option, so remove it from tab completion.
Also, reword the error message that is thrown when all the
publications from a subscription are specified to be dropped.
Also, made few doc and cosmetic adjustments.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddy@enterprisedb.com>
Reviewed-by: Japin Li <japinli@hotmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CALDaNm21RwsDzs4xj14ApteAF7auyyomHNnp+NEL-sH8m-jMvQ@mail.gmail.com
This adds MITM and SNI as acronyms, as the documentation already had
them marked up with <acronym>.
While on it, make sure to spell man-in-the-middle with dashes
consistently, and add acronyms for those new terms where appropriate.
Author: Daniel Gustafsson
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CE12DD5C-4BB3-4166-BC9A-39779568734C@yesql.se
The main goal of this option is to allow inspecting temporary files for
debugging purposes, so moving the parameter there is natural.
Oversight in cd91de0.
Reported-by: Justin Pryzby
Author: Euler Taveira
Discussion: https://postgr.es/m/20210612004347.GP16435@telsasoft.com
The syntax summaries for CREATE FUNCTION and allied commands
made it look like LEAKPROOF is an alternative to
IMMUTABLE/STABLE/VOLATILE, when of course it is an orthogonal
option. Improve that.
Per gripe from aazamrafeeque0. Thanks to David Johnston for
suggestions.
Discussion: https://postgr.es/m/162444349581.694.5818572718530259025@wrigleys.postgresql.org
Generalize the INDEX_CLEANUP VACUUM parameter (and the corresponding
reloption): make it into a ternary style boolean parameter. It now
exposes a third option, "auto". The "auto" option (which is now the
default) enables the "bypass index vacuuming" optimization added by
commit 1e55e7d1.
"VACUUM (INDEX_CLEANUP TRUE)" is redefined to once again make VACUUM
simply do any required index vacuuming, regardless of how few dead
tuples are encountered during the first scan of the target heap relation
(unless there are exactly zero). This gives users a way of opting out
of the "bypass index vacuuming" optimization, if for whatever reason
that proves necessary. It is also expected to be used by PostgreSQL
developers as a testing option from time to time.
"VACUUM (INDEX_CLEANUP FALSE)" does the same thing as it always has: it
forcibly disables both index vacuuming and index cleanup. It's not
expected to be used much in PostgreSQL 14. The failsafe mechanism added
by commit 1e55e7d1 addresses the same problem in a simpler way.
INDEX_CLEANUP can now be thought of as a testing and compatibility
option.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CAH2-WznrBoCST4_Gxh_G9hA8NzGUbeBGnOUC8FcXcrhqsv6OHQ@mail.gmail.com
In a synchronous logical setup, locking [user] catalog tables can cause
deadlock. This is because logical decoding of transactions can lock
catalog tables to access them so exclusively locking those in transactions
can lead to deadlock. To avoid this users must refrain from having
exclusive locks on catalog tables.
Author: Takamichi Osumi
Reviewed-by: Vignesh C, Amit Kapila
Backpatch-through: 9.6
Discussion: https://www.postgresql.org/message-id/20210222222847.tpnb6eg3yiykzpky%40alap3.anarazel.de
It has been spotted that multiranges lack of ability to decompose them into
individual ranges. Subscription and proper expanded object representation
require substantial work, and it's too late for v14. This commit
provides the implementation of unnest(multirange) and cast multirange as
an array of ranges, which is quite trivial.
unnest(multirange) is defined as a polymorphic procedure. The catalog
description of the cast underlying procedure is duplicated for each multirange
type because we don't have anyrangearray polymorphic type to use here.
Catversion is bumped.
Reported-by: Jonathan S. Katz
Discussion: https://postgr.es/m/flat/60258efe-bd7e-4886-82e1-196e0cac5433%40postgresql.org
Author: Alexander Korotkov
Reviewed-by: Justin Pryzby, Jonathan S. Katz, Zhihong Yu
It was unable to wait on a backend that had already left the procarray.
Users tolerant of that limitation can poll pg_stat_activity. Other
users can employ the "timeout" argument of pg_terminate_backend().
Reviewed by Bharath Rupireddy.
Discussion: https://postgr.es/m/20210605013236.GA208701@rfd.leadboat.com
Revert the pg_description entry to its v13 form, since those messages
usually remain shorter and don't discuss individual parameters. No
catversion bump, since pg_description content does not impair backend
compatibility or application compatibility.
Justin Pryzby
Discussion: https://postgr.es/m/20210612182743.GY16435@telsasoft.com
The extra checks added by the recompression of toast data introduced in
bbe0a81 is proving to have a performance impact on VACUUM or CLUSTER
even if no recompression is done. This is more noticeable with more
toastable columns that contain non-NULL values.
Improvements could be done to make those extra checks less expensive,
but that's not material for 14 at this stage, and we are not sure either
if the code path of VACUUM FULL/CLUSTER is adapted for this job.
Per discussion with several people, including Andres Freund, Robert
Haas, Álvaro Herrera, Tom Lane and myself.
Discussion: https://postgr.es/m/20210527003144.xxqppojoiwurc2iz@alap3.anarazel.de
We have a dozen PQset*() functions. PQresultSetInstanceData() and this
were the libpq setter functions having a different word order. Adopt
the majority word order.
Reviewed by Alvaro Herrera and Robert Haas, though this choice of name
was not unanimous.
Discussion: https://postgr.es/m/20210605060555.GA216695@rfd.leadboat.com
We've accumulated quite a mix of instances of "an SQL" and "a SQL" in the
documents. It would be good to be a bit more consistent with these.
The most recent version of the SQL standard I looked at seems to prefer
"an SQL". That seems like a good lead to follow, so here we change all
instances of "a SQL" to become "an SQL". Most instances correctly use
"an SQL" already, so it also makes sense to use the dominant variation in
order to minimise churn.
Additionally, there were some other abbreviations that needed to be
adjusted. FSM, SSPI, SRF and a few others. Also fix some pronounceable,
abbreviations to use "a" instead of "an". For example, "a SASL" instead
of "an SASL".
Here I've only adjusted the documents and error messages. Many others
still exist in source code comments. Translator hint comments seem to be
the biggest culprit. It currently does not seem worth the churn to change
these.
Discussion: https://postgr.es/m/CAApHDvpML27UqFXnrYO1MJddsKVMQoiZisPvsAGhKE_tsKXquw%40mail.gmail.com
Commit 2453ea142 redefined pg_proc.proargtypes to include the types of
OUT parameters, for procedures only. While that had some advantages
for implementing the SQL-spec behavior of DROP PROCEDURE, it was pretty
disastrous from a number of other perspectives. Notably, since the
primary key of pg_proc is name + proargtypes, this made it possible to
have multiple procedures with identical names + input arguments and
differing output argument types. That would make it impossible to call
any one of the procedures by writing just NULL (or "?", or any other
data-type-free notation) for the output argument(s). The change also
seems likely to cause grave confusion for client applications that
examine pg_proc and expect the traditional definition of proargtypes.
Hence, revert the definition of proargtypes to what it was, and
undo a number of complications that had been added to support that.
To support the SQL-spec behavior of DROP PROCEDURE, when there are
no argmode markers in the command's parameter list, we perform the
lookup both ways (that is, matching against both proargtypes and
proallargtypes), succeeding if we get just one unique match.
In principle this could result in ambiguous-function failures
that would not happen when using only one of the two rules.
However, overloading of procedure names is thought to be a pretty
rare usage, so this shouldn't cause many problems in practice.
Postgres-specific code such as pg_dump can defend against any
possibility of such failures by being careful to specify argmodes
for all procedure arguments.
This also fixes a few other bugs in the area of CALL statements
with named parameters, and improves the documentation a little.
catversion bump forced because the representation of procedures
with OUT arguments changes.
Discussion: https://postgr.es/m/3742981.1621533210@sss.pgh.pa.us
PersistHoldablePortal has long assumed that it should store the
entire output of the query-to-be-persisted, which requires rewinding
and re-reading the output. This is problematic if the query is not
stable: we might get different row contents, or even a different
number of rows, which'd confuse the cursor state mightily.
In the case where the cursor is NO SCROLL, this is very easy to
solve: just store the remaining query output, without any rewinding,
and tweak the portal's cursor state to match. Aside from removing
the semantic problem, this could be significantly more efficient
than storing the whole output.
If the cursor is scrollable, there's not much we can do, but it
was already the case that scrolling a volatile query's result was
pretty unsafe. We can just document more clearly that getting
correct results from that is not guaranteed.
There are already prohibitions in place on using SCROLL with
FOR UPDATE/SHARE, which is one way for a SELECT query to have
non-stable results. We could imagine prohibiting SCROLL when
the query contains volatile functions, but that would be
expensive to enforce. Moreover, it could break applications
that work just fine, if they have functions that are in fact
stable but the user neglected to mark them so. So settle for
documenting the hazard.
While this problem has existed in some guise for a long time,
it got a lot worse in v11, which introduced the possibility
of persisting plpgsql cursors (perhaps implicit ones) even
when they violate the rules for what can be marked WITH HOLD.
Hence, I've chosen to back-patch to v11 but not further.
Per bug #17050 from Алексей Булгаков.
Discussion: https://postgr.es/m/17050-f77aa827dc85247c@postgresql.org
The FE/BE protocol identifies parameters with an Int16 index, which
limits the maximum number of parameters per query to 65535. With
batching added to postges_fdw this limit is much easier to hit, as
the whole batch is essentially a single query, making this error much
easier to hit.
The failures are a bit unpredictable, because it also depends on the
number of columns in the query. So instead of just failing, this patch
tweaks the batch_size to not exceed the maximum number of parameters.
Reported-by: Hou Zhijie <houzj.fnst@cn.fujitsu.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/OS0PR01MB571603973C0AC2874AD6BF2594299%40OS0PR01MB5716.jpnprd01.prod.outlook.com
This was missing in the section dedicated to the supported environment
variables of libpq. Oversight in f5465fa.
Reviewed-by: Daniel Gustafsson, Kyotaro Horiguchi
Discussion: https://postgr.es/m/YLhI0mLoRkY3u4Wj@paquier.xyz
The previous arrangement was just one big list, and the internal order
was not all consistent either. Now arrange the options by group and
sort them, the way it's already done in the --help output and one
other reference pages. Also fix some ordering in the --help output.
Clarify libpq.sgml's description of service file locations and
semantics. Avoid use of backtick'ed pg_config calls to describe
paths; that doesn't work on Windows, and even on Unix it's an
idiom that not all readers may be instantly familiar with.
Don't overspecify the locations of include files, instead writing
only as much as you'd use in #include directives. The previous text
in these places was incorrect for some installations, depending on
where "postgresql" is in the install path.
Our convention for referencing the user's home directory seems
to be "~", so change the one place that spelled it "$HOME".
install-windows.sgml follows the platform convention of spelling
file paths with "\", so change the one place that used "/".
Haiying Tang and Tom Lane
Discussion: https://postgr.es/m/162149020918.26174.7150424047314144297@wrigleys.postgresql.org
Commit ab596105b increased FirstBootstrapObjectId from 12000 to 13000,
but we've had some push-back about that. It's worrisome to reduce the
daylight between there and FirstNormalObjectId, because the number of
OIDs consumed during initdb for collation objects is hard to predict.
We can improve the situation by abandoning the assumption that these
OIDs must be globally unique. It should be sufficient for them to be
unique per-catalog. (Any code that's unhappy about that is broken
anyway, since no more than per-catalog uniqueness can be guaranteed
once the OID counter wraps around.) With that change, the largest OID
assigned during genbki.pl (starting from a base of 10000) is a bit
under 11000. This allows reverting FirstBootstrapObjectId to 12000
with reasonable confidence that that will be sufficient for many years
to come.
We are not, at this time, abandoning the expectation that
hand-assigned OIDs (below 10000) are globally unique. Someday that'll
likely be necessary, but the need seems years away still.
This is late for v14, but it seems worth doing it now so that
downstream software doesn't have to deal with the consequences of
a change in FirstBootstrapObjectId. In any case, we already
bought into forcing an initdb for beta2, so another catversion
bump won't hurt.
Discussion: https://postgr.es/m/1665197.1622065382@sss.pgh.pa.us
Redefine '\0' (InvalidCompressionMethod) as meaning "if we need to
compress, use the current setting of default_toast_compression".
This allows '\0' to be a suitable default choice regardless of
datatype, greatly simplifying code paths that initialize tupledescs
and the like. It seems like a more user-friendly approach as well,
because now the default compression choice doesn't migrate into table
definitions, meaning that changing default_toast_compression is
usually sufficient to flip an installation's behavior; one needn't
tediously issue per-column ALTER SET COMPRESSION commands.
Along the way, fix a few minor bugs and documentation issues
with the per-column-compression feature. Adopt more robust
APIs for SetIndexStorageProperties and GetAttributeCompression.
Bump catversion because typical contents of attcompression will now
be different. We could get away without doing that, but it seems
better to ensure v14 installations all agree on this. (We already
forced initdb for beta2, anyway.)
Discussion: https://postgr.es/m/626613.1621787110@sss.pgh.pa.us
The following parameters have been imprecise, or incorrect, about their
description (PGC_POSTMASTER or PGC_SIGHUP):
- autovacuum_work_mem (docs, as of 9.6~)
- huge_page_size (docs, as of 14~)
- max_logical_replication_workers (docs, as of 10~)
- max_sync_workers_per_subscription (docs, as of 10~)
- min_dynamic_shared_memory (docs, as of 14~)
- recovery_init_sync_method (postgresql.conf.sample, as of 14~)
- remove_temp_files_after_crash (docs, as of 14~)
- restart_after_crash (docs, as of 9.6~)
- ssl_min_protocol_version (docs, as of 12~)
- ssl_max_protocol_version (docs, as of 12~)
This commit adjusts the description of all these parameters to be more
consistent with the practice used for the others.
Revewed-by: Justin Pryzby
Discussion: https://postgr.es/m/YK2ltuLpe+FbRXzA@paquier.xyz
Backpatch-through: 9.6
The error messages, docs, and one of the options were using
'parallel degree' to indicate parallelism used by vacuum command. We
normally use 'parallel workers' at other places so change it for parallel
vacuum accordingly.
Author: Bharath Rupireddy
Reviewed-by: Dilip Kumar, Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/CALj2ACWz=PYrrFXVsEKb9J1aiX4raA+UBe02hdRp_zqDkrWUiw@mail.gmail.com
Now that attcompression is just a char, there's a lot of wasted
padding space after it. Move it into the group of char-wide
columns to save a net of 4 bytes per pg_attribute entry. While
we're at it, swap the order of attstorage and attalign to make for
a more logical grouping of these columns.
Also re-order actions in related code to match the new field ordering.
This patch also fixes one outright bug: equalTupleDescs() failed to
compare attcompression. That could, for example, cause relcache
reload to fail to adopt a new value following a change.
Michael Paquier and Tom Lane, per a gripe from Andres Freund.
Discussion: https://postgr.es/m/20210517204803.iyk5wwvwgtjcmc5w@alap3.anarazel.de
COMMIT/ROLLBACK necessarily destroys all snapshots within the session.
The original implementation of intra-procedure transactions just
cavalierly did that, ignoring the fact that this left us executing in
a rather different environment than normal. In particular, it turns
out that handling of toasted datums depends rather critically on there
being an outer ActiveSnapshot: otherwise, when SPI or the core
executor pop whatever snapshot they used and return, it's unsafe to
dereference any toasted datums that may appear in the query result.
It's possible to demonstrate "no known snapshots" and "missing chunk
number N for toast value" errors as a result of this oversight.
Historically this outer snapshot has been held by the Portal code,
and that seems like a good plan to preserve. So add infrastructure
to pquery.c to allow re-establishing the Portal-owned snapshot if it's
not there anymore, and add enough bookkeeping support that we can tell
whether it is or not.
We can't, however, just re-establish the Portal snapshot as part of
COMMIT/ROLLBACK. As in normal transaction start, acquiring the first
snapshot should wait until after SET and LOCK commands. Hence, teach
spi.c about doing this at the right time. (Note that this patch
doesn't fix the problem for any PLs that try to run intra-procedure
transactions without using SPI to execute SQL commands.)
This makes SPI's no_snapshots parameter rather a misnomer, so in HEAD,
rename that to allow_nonatomic.
replication/logical/worker.c also needs some fixes, because it wasn't
careful to hold a snapshot open around AFTER trigger execution.
That code doesn't use a Portal, which I suspect someday we're gonna
have to fix. But for now, just rearrange the order of operations.
This includes back-patching the recent addition of finish_estate()
to centralize the cleanup logic there.
This also back-patches commit 2ecfeda3e into v13, to improve the
test coverage for worker.c (it was that test that exposed that
worker.c's snapshot management is wrong).
Per bug #15990 from Andreas Wicht. Back-patch to v11 where
intra-procedure COMMIT was added.
Discussion: https://postgr.es/m/15990-eee2ac466b11293d@postgresql.org
This is an oversight from bbe0a81d, where the equivalent option exists
in pg_dump. This is useful to be able to reset the compression methods
cluster-wide when restoring the data based on default_toast_compression.
Reviewed-by: Daniel Gustafsson, Tom Lane
Discussion: https://postgr.es/m/YKHC+qCJvzCRVCpY@paquier.xyz
