Commit Graph

27 Commits

Author SHA1 Message Date
Peter Eisentraut
1e95bbc870 Fix SHLIB_PREREQS use in contrib, allowing PGXS builds
dblink and postgres_fdw use SHLIB_PREREQS = submake-libpq to build libpq
first.  This doesn't work in a PGXS build, because there is no libpq to
build.  So just omit setting SHLIB_PREREQS in this case.

Note that PGXS users can still use SHLIB_PREREQS (although it is not
documented).  The problem here is only that contrib modules can be built
in-tree or using PGXS, and the prerequisite is only applicable in the
former case.

Commit 6697aa2bc2 previously attempted to
address this by creating a somewhat fake submake-libpq target in
Makefile.global.  That was not the right fix, and it was also done in a
nonportable way, so revert that.
2014-12-04 07:58:12 -05:00
Andres Freund
ddc2504dbc Don't hardcode contrib_regression dbname in postgres_fdw and dblink tests.
That allows parallel installcheck to succeed inside contrib/. The
output is not particularly pretty unless make's -O option to
synchronize the output is used.

There's other tests, outside contrib, that use a hardcoded,
non-unique, database name. Those prohibit paralell installcheck to be
used across more directories; but that's something for a separate
patch.
2014-08-26 12:27:26 +02:00
Noah Misch
d7cdf6ee36 Diagnose incompatible OpenLDAP versions during build and test.
With OpenLDAP versions 2.4.24 through 2.4.31, inclusive, PostgreSQL
backends can crash at exit.  Raise a warning during "configure" based on
the compile-time OpenLDAP version number, and test the crash scenario in
the dblink test suite.  Back-patch to 9.0 (all supported versions).
2014-07-22 11:01:03 -04:00
Noah Misch
0ffc201a51 Add file version information to most installed Windows binaries.
Prominent binaries already had this metadata.  A handful of minor
binaries, such as pg_regress.exe, still lack it; efforts to eliminate
such exceptions are welcome.

Michael Paquier, reviewed by MauMau.
2014-07-14 14:07:52 -04:00
Andrew Dunstan
ad69bd052f Add mode where contrib installcheck runs each module in a separately named database.
Normally each module is tested in a database named contrib_regression,
which is dropped and recreated at the beginhning of each pg_regress run.
This new mode, enabled by adding USE_MODULE_DB=1 to the make command
line, runs most modules in a database with the module name embedded in
it.

This will make testing pg_upgrade on clusters with the contrib modules
a lot easier.

Second attempt at this, this time accomodating make versions older
than 3.82.

Still to be done: adapt to the MSVC build system.

Backpatch to 9.0, which is the earliest version it is reasonably
possible to test upgrading from.
2012-12-11 11:52:45 -05:00
Andrew Dunstan
fc5c1bbbeb Revert "Add mode where contrib installcheck runs each module in a separately named database."
This reverts commit e2b3c21b05.
2012-12-03 15:00:51 -05:00
Andrew Dunstan
e2b3c21b05 Add mode where contrib installcheck runs each module in a separately named database.
Normally each module is tested in aq database named contrib_regression,
which is dropped and recreated at the beginhning of each pg_regress run.
This mode, enabled by adding USE_MODULE_DB=1 to the make command line,
runs most modules in a database with the module name embedded in it.

This will make testing pg_upgrade on clusters with the contrib modules
a lot easier.

Still to be done: adapt to the MSVC build system.

Backpatch to 9.0, which is the earliest version it is reasonably possible
to test upgrading from.
2012-12-02 17:20:38 -05:00
Tom Lane
8255566f9d Create an improved FDW option validator function for contrib/dblink.
dblink now has its own validator function dblink_fdw_validator(), which is
better than the core function postgresql_fdw_validator() because it gets
the list of legal options from libpq instead of having a hard-wired list.

Make the dblink extension module provide a standard foreign data wrapper
dblink_fdw that encapsulates use of this validator, and recommend use of
that wrapper instead of making up wrappers on the fly.

Unfortunately, because ad-hoc wrappers *were* recommended practice
previously, it's not clear when we can get rid of postgresql_fdw_validator
without causing upgrade problems.  But this is a step in the right
direction.

Shigeru Hanada, reviewed by KaiGai Kohei
2012-10-10 16:53:08 -04:00
Tom Lane
629b3af27d Convert contrib modules to use the extension facility.
This isn't fully tested as yet, in particular I'm not sure that the
"foo--unpackaged--1.0.sql" scripts are OK.  But it's time to get some
buildfarm cycles on it.

sepgsql is not converted to an extension, mainly because it seems to
require a very nonstandard installation process.

Dimitri Fontaine and Tom Lane
2011-02-13 22:54:49 -05:00
Peter Eisentraut
fc946c39ae Remove useless whitespace at end of lines 2010-11-23 22:34:55 +02:00
Peter Eisentraut
19e231bbda Improved parallel make support
Replace for loops in makefiles with proper dependencies.  Parallel
make can now span across directories.  Also, make -k and make -q work
properly.

GNU make 3.80 or newer is now required.
2010-11-12 22:15:16 +02:00
Magnus Hagander
9f2e211386 Remove cvs keywords from all files. 2010-09-20 22:08:53 +02:00
Bruce Momjian
541ff409cc Remove references to READMEs from /contrib Makefiles. 2007-11-10 23:59:52 +00:00
Tom Lane
b09c248bdd Fix PGXS conventions so that extensions can be built against Postgres
installations whose pg_config program does not appear first in the PATH.
Per gripe from Eddie Stanley and subsequent discussions with Fabien Coelho
and others.
2007-06-26 22:05:04 +00:00
Tom Lane
4ee24cbb55 Install a cleaner solution to the AIX libpq linking problem, as per
an earlier discussion.  Centralize assumptions about what libpq depends
on in one place in Makefile.global.  I am unconvinced that this list
is complete, but since ecpg seems to have gotten along with just these
entries, we'll try it this way and see what happens.
2006-09-10 22:07:02 +00:00
Tom Lane
723af8e67a Fix dblink build for --enable-nls or --enable-openssl on AIX.
Per Chris Browne.
2006-09-10 21:38:26 +00:00
Peter Eisentraut
fe83b3ebc6 contrib uninstall scripts
by David Fetter
2006-02-27 12:54:39 +00:00
Tom Lane
0b36cb83dc PGXS should be set with := not =, as specified in the documentation,
to avoid useless multiple executions of pg_config.
2005-09-27 17:13:14 +00:00
Bruce Momjian
ee85595d46 > Please find enclose a submission to fix these problems.
>
> The patch adds missing the "libpgport.a" file to the installation under
> "install-all-headers". It is needed by some contribs. I install the
> library in "pkglibdir", but I was wondering whether it should be "libdir"?
> I was wondering also whether it would make sense to have a "libpgport.so"?
>
> It fixes various macros which are used by contrib makefiles, especially
> libpq_*dir and LDFLAGS when used under PGXS. It seems to me that they are
> needed to
>
> It adds the ability to test and use PGXS with contribs, with "make
> USE_PGXS=1". Without the macro, this is exactly as before, there should be
> no difference, esp. wrt the vpath feature that seemed broken by previous
> submission. So it should not harm anybody, and it is useful at least to me.
>
> It fixes some inconsistencies in various contrib makefiles
> (useless override, ":=" instead of "=").

Fabien COELHO
2004-08-20 20:13:10 +00:00
PostgreSQL Daemon
969685ad44 $Header: -> $PostgreSQL Changes ... 2003-11-29 19:52:15 +00:00
Tom Lane
d724c314da The attached adds GRANTs to PUBLIC for dblink functions, removes the
non-standard regression test, and adds standard installcheck regression test
support.

The test creates a second database (regression_slave) and drops it again, in
order to avoid the cheesy-ness of connecting back to the same database ;-)

Joe Conway
2002-09-14 20:28:54 +00:00
Tom Lane
e167510a4f Clean out cruft left by nonstandard test procedure. 2002-09-03 04:01:05 +00:00
Bruce Momjian
d64b97ae37 Add dbmirror to /contrib. Minor C cleanups and Makefile.
Steven Singer
2002-06-23 21:58:08 +00:00
Peter Eisentraut
17cc78ef01 To fix the perpetually broken makefiles in the contrib tree, I have
written a generic framework of rules that the contrib makefiles can
use instead of writing their own each time.  You only need to set a few
variables and off you go.
2001-09-06 10:49:30 +00:00
Bruce Momjian
7aac048b59 Attached is a patch to deal with the ones that I missed the first time
around.  I tested this patch under Cygwin and Linux.

Note that I only changed dblink's Makefile in the most minimal way
to fix the link problem under Cygwin (i.e., use the link rule from
Makefile.shlib instead).  dblink's Makefile should probably be further
patched to be consistent with the other PostgreSQL Makefiles.

Jason Tishler
2001-06-20 00:04:44 +00:00
Bruce Momjian
558fae16e3 The attached patch enables the contrib subtree to build cleanly under
Cygwin with the possible exception of mSQL-interface.  Since I don't
have mSQL installed, I skipped this tool.

Except for dealing with a missing getopt.h (oid2name) and HUGE (seg),
the bulk of the patch uses the standard PostgreSQL approach to deal with
Windows DLL issues.

I tested the build aspect of this patch under Cygwin and Linux without
any ill affects.  Note that I did not actually attempt to test the code
for functionality.

The procedure to apply the patch is as follows:

    $ # save the attachment as /tmp/contrib.patch
    $ # change directory to the top of the PostgreSQL source tree
    $ patch -p0 </tmp/contrib.patch

Jason
2001-06-18 21:38:02 +00:00
Bruce Momjian
5af4855383 Allow remote query execution (dblink)
Joe Conway
2001-06-14 16:49:03 +00:00