When ALTER TABLESPACE MOVE ALL was changed to be ALTER TABLE ALL IN
TABLESPACE, the ALTER TABLESPACE summary should have been adjusted back
to its original definition.
Patch by Thom Brown (thanks!).
This function has a loop which can lead to uninterruptible process
"stalls" (actually infinite loops) when some bugs are triggered. Avoid
that unpleasant situation by adding a check for interrupts in a place
that shouldn't degrade performance in the normal case.
Backpatch to 9.3. Older branches have an identical loop here, but the
aforementioned bugs are only a problem starting in 9.3 so there doesn't
seem to be any point in backpatching any further.
Fix breakage induced by commits d8d3d2a4f3
and 463f2625a5: pg_dumpall has crashed when
attempting to dump from pre-8.1 servers since then, due to faulty
construction of the query used for dumping roles from older servers.
The query was erroneous as of the earlier commit, but it wasn't exposed
unless you tried to use --binary-upgrade, which you presumably wouldn't
with a pre-8.1 server. However commit 463f2625a made it fail always.
In HEAD, also fix additional breakage induced in the same query by
commit 491c029dbc, which evidently wasn't
tested against pre-8.1 servers either.
The bug is only latent in 9.1 because 463f2625a hadn't landed yet, but
it seems best to back-patch all branches containing the faulty query.
Gilles Darold
There are basically three situations in which logical decoding needs
to perform cache invalidation. During/After replaying a transaction
with catalog changes, when skipping a uninteresting transaction that
performed catalog changes and when erroring out while replaying a
transaction. Unfortunately these three cases were all done slightly
differently - partially because 8de3e410fa, which greatly simplifies
matters, got committed in the midst of the development of logical
decoding.
The actually problematic case was when logical decoding skipped
transaction commits (and thus processed invalidations). When used via
the SQL interface cache invalidation could access the catalog - bad,
because we didn't set up enough state to allow that correctly. It'd
not be hard to setup sufficient state, but the simpler solution is to
always perform cache invalidation outside a valid transaction.
Also make the different cache invalidation cases look as similar as
possible, to ease code review.
This fixes the assertion failure reported by Antonin Houska in
53EE02D9.7040702@gmail.com. The presented testcase has been expanded
into a regression test.
Backpatch to 9.4, where logical decoding was introduced.
When building the initial historic catalog snapshot there were
scenarios where snapbuild.c would use incorrect xmin/xmax values when
starting from a xl_running_xacts record. The values used were always a
bit suspect, but happened to be correct in the easy to test
cases. Notably the values used when the the initial snapshot was
computed while no other transactions were running were correct.
This is likely to be the cause of the occasional buildfarm failures on
animals markhor and tick; but it's quite possible to reproduce
problems without CLOBBER_CACHE_ALWAYS.
Backpatch to 9.4, where logical decoding was introduced.
There was a window in RestoreBackupBlock where a page would be zeroed out,
but not yet locked. If a backend pinned and locked the page in that window,
it saw the zeroed page instead of the old page or new page contents, which
could lead to missing rows in a result set, or errors.
To fix, replace RBM_ZERO with RBM_ZERO_AND_LOCK, which atomically pins,
zeroes, and locks the page, if it's not in the buffer cache already.
In stable branches, the old RBM_ZERO constant is renamed to RBM_DO_NOT_USE,
to avoid breaking any 3rd party extensions that might use RBM_ZERO. More
importantly, this avoids renumbering the other enum values, which would
cause even bigger confusion in extensions that use ReadBufferExtended, but
haven't been recompiled.
Backpatch to all supported versions; this has been racy since hot standby
was introduced.
This only happens if a client issues a Parse message with an empty query
string, which is a bit odd; but since it is explicitly called out as legal
by our FE/BE protocol spec, we'd probably better continue to allow it.
Fix by adding tests everywhere that the raw_parse_tree field is passed to
functions that don't or shouldn't accept NULL. Also make it clear in the
relevant comments that NULL is an expected case.
This reverts commits a73c9dbab0 and
2e9650cbcf, which fixed specific crash
symptoms by hacking things at what now seems to be the wrong end, ie the
callee functions. Making the callees allow NULL is superficially more
robust, but it's not always true that there is a defensible thing for the
callee to do in such cases. The caller has more context and is better
able to decide what the empty-query case ought to do.
Per followup discussion of bug #11335. Back-patch to 9.2. The code
before that is sufficiently different that it would require development
of a separate patch, which doesn't seem worthwhile for what is believed
to be an essentially cosmetic change.
Heikki noticed in 544E23C0.8090605@vmware.com that slot.c and
snapbuild.c were missing the FIN_CRC32 call when computing/checking
checksums of on disk files. That doesn't lower the the error detection
capabilities of the checksum, but is inconsistent with other usages.
In a followup mail Heikki also noticed that, contrary to a comment,
the 'version' and 'length' struct fields of replication slot's on disk
data where not covered by the checksum. That's not likely to lead to
actually missed corruption as those fields are cross checked with the
expected version and the actual file length. But it's wrong
nonetheless.
As fixing these issues makes existing on disk files unreadable, bump
the expected versions of on disk files for both slots and logical
decoding historic catalog snapshots. This means that loading old
files will fail with
ERROR: "replication slot file ... has unsupported version 1"
and
ERROR: "snapbuild state file ... has unsupported version 1 instead of
2" respectively. Given the low likelihood of anybody already using
these new features in a production setup that seems acceptable.
Fixing these issues made me notice that there's no regression test
covering the loading of historic snapshot from disk - so add one.
Backpatch to 9.4 where these features were introduced.
Currently the extension's pg_prewarm() function didn't check
interrupts once it started "warming" data. Since individual calls can
take a long while it's important for them to be interruptible.
Backpatch to 9.4 where pg_prewarm was introduced.
On Windows, DROP TABLESPACE has a race condition when run concurrently
with other processes having opened files in the tablespace. This led to
a rare failure on buildfarm member frogmouth. Back-patch to 9.4, where
the reconnection was introduced.
This fixes a scenario in which pgp_sym_decrypt() failed with "Wrong key
or corrupt data" on messages whose length is 6 less than a power of 2.
Per bug #11905 from Connor Penhale. Fix by Marko Tiikkaja, regression
test case from Jeff Janes.
When the recursive search in dependency.c visits a column and then later
visits the whole table containing the column, it needs to propagate the
drop-context flags for the table to the existing target-object entry for
the column. Otherwise we might refuse the DROP (if not CASCADE) on the
incorrect grounds that there was no automatic drop pathway to the column.
Remarkably, this has not been reported before, though it's possible at
least when an extension creates both a datatype and a table using that
datatype.
Rather than just marking the column as allowed to be dropped, it might
seem good to skip the DROP COLUMN step altogether, since the later DROP
of the table will surely get the job done. The problem with that is that
the datatype would then be dropped before the table (since the whole
situation occurred because we visited the datatype, and then recursed to
the dependent column, before visiting the table). That seems pretty risky,
and the case is rare enough that it doesn't seem worth expending a lot of
effort or risk to make the drops happen in a safe order. So we just play
dumb and delete the column separately according to the existing drop
ordering rules.
Per report from Petr Jelinek, though this is different from his proposed
patch.
Back-patch to 9.1, where extensions were introduced. There's currently
no evidence that such cases can arise before 9.1, and in any case we would
also need to back-patch cb5c2ba2d8 to 9.0
if we wanted to back-patch this.
At one time it wasn't terribly important what column names were associated
with the fields of a composite Datum, but since the introduction of
operations like row_to_json(), it's important that looking up the rowtype
ID embedded in the Datum returns the column names that users would expect.
That did not work terribly well before this patch: you could get the column
names of the underlying table, or column aliases from any level of the
query, depending on minor details of the plan tree. You could even get
totally empty field names, which is disastrous for cases like row_to_json().
To fix this for whole-row Vars, look to the RTE referenced by the Var, and
make sure its column aliases are applied to the rowtype associated with
the result Datums. This is a tad scary because we might have to return
a transient RECORD type even though the Var is declared as having some
named rowtype. In principle it should be all right because the record
type will still be physically compatible with the named rowtype; but
I had to weaken one Assert in ExecEvalConvertRowtype, and there might be
third-party code containing similar assumptions.
Similarly, RowExprs have to be willing to override the column names coming
from a named composite result type and produce a RECORD when the column
aliases visible at the site of the RowExpr differ from the underlying
table's column names.
In passing, revert the decision made in commit 398f70ec07 to add
an alias-list argument to ExecTypeFromExprList: better to provide that
functionality in a separate function. This also reverts most of the code
changes in d685814835, which we don't need because we're no longer
depending on the tupdesc found in the child plan node's result slot to be
blessed.
Back-patch to 9.4, but not earlier, since this solution changes the results
in some cases that users might not have realized were buggy. We'll apply a
more restricted form of this patch in older branches.
Work around accidental test failures because the working directory path
is too long by creating a temporary directory in the (hopefully shorter)
system location, symlinking that to the working directory, and creating
the tablespaces using the shorter path.
dict_thesaurus stored phrase IDs in uint16 fields, so it would get confused
and even crash if there were more than 64K entries in the configuration
file. It turns out to be basically free to widen the phrase IDs to uint32,
so let's just do so.
This was complained of some time ago by David Boutin (in bug #7793);
he later submitted an informal patch but it was never acted on.
We now have another complaint (bug #11901 from Luc Ouellette) so it's
time to make something happen.
This is basically Boutin's patch, but for future-proofing I also added a
defense against too many words per phrase. Note that we don't need any
explicit defense against overflow of the uint32 counters, since before that
happens we'd hit array allocation sizes that repalloc rejects.
Back-patch to all supported branches because of the crash risk.
The default JSONB GIN opclass (jsonb_ops) converts numeric data values
to strings for storage in the index. It must ensure that numeric values
that would compare equal (such as 12 and 12.00) produce identical strings,
else index searches would have behavior different from regular JSONB
comparisons. Unfortunately the function charged with doing this was
completely wrong: it could reduce distinct numeric values to the same
string, or reduce equivalent numeric values to different strings. The
former type of error would only lead to search inefficiency, but the
latter type of error would cause index entries that should be found by
a search to not be found.
Repairing this bug therefore means that it will be necessary for 9.4 beta
testers to reindex GIN jsonb_ops indexes, if they care about getting
correct results from index searches involving numeric data values within
the comparison JSONB object.
Per report from Thomas Fanghaenel.
Previously .ready file was created for the timeline history file at the end
of an archive recovery even when WAL archiving was not enabled.
This creation is unnecessary and causes .ready file to remain infinitely.
This commit changes an archive recovery so that it creates .ready file for
the timeline history file only when WAL archiving is enabled.
Backpatch to all supported versions.
In general, datatype I/O functions are supposed to be immutable or at
worst stable. Some contrib I/O functions were, through oversight, not
marked with any volatility property at all, which made them VOLATILE.
Since (most of) these functions actually behave immutably, the erroneous
marking isn't terribly harmful; but it can be user-visible in certain
circumstances, as per a recent bug report from Joe Van Dyk in which a
cast to text was disallowed in an expression index definition.
To fix, just adjust the declarations in the extension SQL scripts. If we
were being very fussy about this, we'd bump the extension version numbers,
but that seems like more trouble (for both developers and users) than the
problem is worth.
A fly in the ointment is that chkpass_in actually is volatile, because
of its use of random() to generate a fresh salt when presented with a
not-yet-encrypted password. This is bad because of the general assumption
that I/O functions aren't volatile: the consequence is that records or
arrays containing chkpass elements may have input behavior a bit different
from a bare chkpass column. But there seems no way to fix this without
breaking existing usage patterns for chkpass, and the consequences of the
inconsistency don't seem bad enough to justify that. So for the moment,
just document it in a comment.
Since we're not bumping version numbers, there seems no harm in
back-patching these fixes; at least future installations will get the
functions marked correctly.
The previous coding assumed that we could just let buffers for the
database's old tablespace age out of the buffer arena naturally.
The folly of that is exposed by bug #11867 from Marc Munro: the user could
later move the database back to its original tablespace, after which any
still-surviving buffers would match lookups again and appear to contain
valid data. But they'd be missing any changes applied while the database
was in the new tablespace.
This has been broken since ALTER SET TABLESPACE was introduced, so
back-patch to all supported branches.
pgp_sym_encrypt's option is spelled "sess-key", not "enable-session-key".
Spotted by Jeff Janes.
In passing, improve a comment in pgp-pgsql.c to make it clearer that
the debugging options are intentionally undocumented.
The reasons behind commit 0d147e43ad still
stand, so this reverts the non-cosmetic portion of commit
a7983e989d. Back-patch to 9.4, where the
latter commit first appeared.
Cygwin builds require this of dependencies pertaining to pattern rules.
On Cygwin, stat("foo") in the absence of a file with that exact name can
locate foo.exe. While GNU make uses stat() for dependencies of ordinary
rules, it uses readdir() to assess dependencies of pattern rules.
Therefore, a pattern rule dependency should match any underlying file
name exactly. Back-patch to 9.4, where the dependency was introduced.
As noted by Noah Misch, my initial cut at fixing bug #11638 didn't cover
all cases where ANALYZE might be invoked in an unsafe context. We need to
test the result of IsInTransactionChain not IsTransactionBlock; which is
notationally a pain because IsInTransactionChain requires an isTopLevel
flag, which would have to be passed down through several levels of callers.
I chose to pass in_outer_xact (ie, the result of IsInTransactionChain)
rather than isTopLevel per se, as that seemed marginally more apropos
for the intermediate functions to know about.
Nobody seemed concerned about this naming when it originally went in,
but there's a pending patch that implements the opposite of
dsm_keep_mapping, and the term "unkeep" was judged unpalatable.
"unpin" has existing precedent in the PostgreSQL code base, and the
English language, so use this terminology instead.
Per discussion, back-patch to 9.4.
VACUUM and ANALYZE update the target table's pg_class row in-place, that is
nontransactionally. This is OK, more or less, for the statistical columns,
which are mostly nontransactional anyhow. It's not so OK for the DDL hint
flags (relhasindex etc), which might get changed in response to
transactional changes that could still be rolled back. This isn't a
problem for VACUUM, since it can't be run inside a transaction block nor
in parallel with DDL on the table. However, we allow ANALYZE inside a
transaction block, so if the transaction had earlier removed the last
index, rule, or trigger from the table, and then we roll back the
transaction after ANALYZE, the table would be left in a corrupted state
with the hint flags not set though they should be.
To fix, suppress the hint-flag updates if we are InTransactionBlock().
This is safe enough because it's always OK to postpone hint maintenance
some more; the worst-case consequence is a few extra searches of pg_index
et al. There was discussion of instead using a transactional update,
but that would change the behavior in ways that are not all desirable:
in most scenarios we're better off keeping ANALYZE's statistical values
even if the ANALYZE itself rolls back. In any case we probably don't want
to change this behavior in back branches.
Per bug #11638 from Casey Shobe. This has been broken for a good long
time, so back-patch to all supported branches.
Tom Lane and Michael Paquier, initial diagnosis by Andres Freund
If you call PQreset() repeatedly, and the connection cannot be
re-established, the error messages from the failed connection attempts
kept accumulating in the error string.
Fixes bug #11455 reported by Caleb Epstein. Backpatch to all supported
versions.
Since we got rid of non-MVCC catalog scans, the fourth reason given for
using a non-transactional update in index_update_stats() is obsolete.
The other three are still good, so we're not going to change the code,
but fix the comment.
Newer toolchains append the extension implicitly if missing, but
buildfarm member narwhal (gcc 3.4.2, ld 2.15.91 20040904) does not.
This affects most core libraries having an exports.txt file, namely
libpq and the ECPG support libraries. On Windows Server 2003, Windows
API functions that load and unload DLLs internally will mistakenly
unload a libpq whose DLL header reports "LIBPQ" instead of "LIBPQ.dll".
When, subsequently, control would return to libpq, the backend crashes.
Back-patch to 9.4, like commit 846e91e022.
Before that commit, we used a different linking technique that yielded
"libpq.dll" in the DLL header.
Commit 53566fc094 worked around this by
eliminating a call to a function that loads and unloads DLLs internally.
That commit is no longer necessary for correctness, but its improving
consistency with the MSVC build remains valid.
1. The comparison for matching terms used only the CRC to decide if there's
a match. Two different terms with the same CRC gave a match.
2. It assumed that if the second operand has more terms than the first, it's
never a match. That assumption is bogus, because there can be duplicate
terms in either operand.
Rewrite the implementation in a way that doesn't have those bugs.
Backpatch to all supported versions.
The malloc request was 1 byte too small for the worst-case output.
This seems relatively unlikely to cause any problems in practice,
as the worst case only occurs if the input string contains no
characters other than single-quote or newline, and even then
malloc alignment padding would probably save the day. But it's
definitely a bug.
David Rowley
Since we taught btree to handle ScalarArrayOpExpr quals natively (commit
9e8da0f757), the planner has always included
ScalarArrayOpExpr quals in index conditions if possible. However, if the
qual is for a non-first index column, this could result in an inferior plan
because we can no longer take advantage of index ordering (cf. commit
807a40c551). It can be better to omit the
ScalarArrayOpExpr qual from the index condition and let it be done as a
filter, so that the output doesn't need to get sorted. Indeed, this is
true for the query introduced as a test case by the latter commit.
To fix, restructure get_index_paths and build_index_paths so that we
consider paths both with and without ScalarArrayOpExpr quals in non-first
index columns. Redesign the API of build_index_paths so that it reports
what it found, saving useless second or third calls.
Report and patch by Andrew Gierth (though rather heavily modified by me).
Back-patch to 9.2 where this code was introduced, since the issue can
result in significant performance regressions compared to plans produced
by 9.1 and earlier.
Perl 5.12 ships with a somewhat broken version of Test::Simple, so skip
the tests if that is found.
The relevant fix is
0.98 Wed, 23 Feb 2011 14:38:02 +1100
Bug Fixes
* subtest() should not fail if $? is non-zero. (Aaron Crane)
The prove program included in Perl 5.8 does not support the --ext
option, so don't use that and use wildcards on the command line instead.
Note that the tests will still all be skipped, because, for instance,
the version of Test::More is too old, but at least the regular
mechanisms for handling that will apply, instead of failing to call
prove altogether.