between signal handler and enable/disable code, avoid accumulation of
timing error due to trying to maintain remaining-time instead of
absolute-end-time, disable timeout before commit not after.
all utility statement types *except* a short list, per discussion a few
days ago. Add missing SetQuerySnapshot calls in VACUUM and REINDEX,
and guard against calling REINDEX DATABASE from a function (has same
problem as VACUUM).
command status at the interactive level. SPI_processed, etc are set
in the same way as the returned command status would have been set if
the same querystring were issued interactively. Per gripe from
Michael Paesold 25-Sep-02.
into postgres.c; make sure it happens for all cases that seem to need it.
Perhaps it would be better to explicitly exclude just a few utility
statement types from setting a snapshot?
ProcKill instead, where we still have a PGPROC with which to wait on
LWLocks. This fixes 'can't wait without a PROC structure' failures
occasionally seen during backend shutdown (I'm surprised they weren't
more frequent, actually). Add an Assert() to LWLockAcquire to help
catch any similar mistakes in future. Fix failure to update MyProcPid
for standalone backends and pgstat processes.
> moment, but they used to be used; I think the correct response is to
> put back the missing counter increments, not rip out the counters.
Ok, fair enough. It's worth noting that they've been broken for a
while -- for example, the HashJoin counter increments were broken when
you comitted r1.20 of executor/nodeHashJoin.c in May of '99.
I've attached a revised patch that doesn't remove the counters (but
doesn't increment them either: I'm not sure of all the places where
the counter should be incremented).
Neil Conway
(notify/SI-overrun interrupt) while it is in process of doing proc_exit,
it is possible for Async_NotifyHandler() to try to start a transaction
when one is already running. This leads to Asserts() or worse. I think
it may only be possible to occur when frontend synchronization is lost
(ie, the elog(FATAL) in SocketBackend() fires), but that is a standard
occurrence after error during COPY. In any case, I have seen this
failure occur during regression tests, so it is definitely possible.
to false provides more SQL-spec-compliant behavior than we had before.
I am not sure that setting it false is actually a good idea yet; there
is a lot of client-side code that will probably be broken by turning
autocommit off. But it's a start.
Loosely based on a patch by David Van Wie.
column additions, deletions, and renames that would let a child table
get out of sync with its parent. Patch by Alvaro Herrera, with some
kibitzing by Tom Lane.
value '-2' is used to indicate a variable-width type whose width is
computed as strlen(datum)+1. Everything that looks at typlen is updated
except for array support, which Joe Conway is working on; at the moment
it wouldn't work to try to create an array of cstring.
This patch is an updated version of the lock listing patch. I've made
the following changes:
- write documentation
- wrap the SRF in a view called 'pg_locks': all user-level
access should be done through this view
- re-diff against latest CVS
One thing I chose not to do is adapt the SRF to use the anonymous
composite type code from Joe Conway. I'll probably do that eventually,
but I'm not really convinced it's a significantly cleaner way to
bootstrap SRF builtins than the method this patch uses (of course, it
has other uses...)
Neil Conway
> There's no longer a separate call to heap_storage_create in that routine
> --- the right place to make the test is now in the storage_create
> boolean parameter being passed to heap_create. A simple change, but
> it passeth patch's understanding ...
Thanks.
Attached is a patch against cvs tip as of 8:30 PM PST or so. Turned out
that even after fixing the failed hunks, there was a new spot in
bufmgr.c which needed to be fixed (related to temp relations;
RelationUpdateNumberOfBlocks). But thankfully the regression test code
caught it :-)
Joe Conway
error handling, and simplifies the code that remains. Apparently,
the code that left Berkeley had a whole "error handling subsystem",
which exceptions and whatnot. Since we don't use that anymore,
there's no reason to keep it around.
The regression tests pass with the patch applied. Unless anyone
sees a problem, please apply.
Neil Conway
executed in an implicitely aborted transaction (e.g. after an occur
occurs), we return an error (and not just a warning). For example:
nconway=# begin;
BEGIN
nconway=# insert; -- syntax error
ERROR: parser: parse error at or near ";"
nconway=# select * from a;
ERROR: current transaction is aborted, queries ignored until end of
transaction block
The old behavior was:
nconway=# begin;
BEGIN
nconway=# insert;
ERROR: parser: parse error at or near ";"
nconway=# select * from a;
WARNING: current transaction is aborted, queries ignored until end
of transaction block
*ABORT STATE*
Which can be confusing: if the client isn't paying careful attention,
they will conclude that the query has executed (because no error is
returned).
Neil Conway
functionality of the command is basically identical to that of
BEGIN; it just accepts a few extra options (only one of which
PostgreSQL currently implements), and is standards-compliant.
The patch includes a simple regression test and documentation.
[ Regression tests removed, per Peter.]
Neil Conway
'tioga recipes', whatever those are -- Peter E. killed most
of it a couple days ago, but this patch removes the rest. Most
of it was #ifdef'ed out anyway.
Neil Conway
documentation (xindex.sgml should be rewritten), need to teach pg_dump
about it, need to update contrib modules that currently build pg_opclass
entries by hand. Original patch by Bill Studenmund, grammar adjustments
and general update for 7.3 by Tom Lane.
extension to create binary compatible casts. Includes dependency tracking
as well.
pg_proc.proimplicit is now defunct, but will be removed in a separate
commit.
pg_dump provides a migration path from the previous scheme to declare
casts. Dumping binary compatible casts is currently impossible, though.
pg_relcheck is gone; CHECK, UNIQUE, PRIMARY KEY, and FOREIGN KEY
constraints all have real live entries in pg_constraint. pg_depend
exists, and RESTRICT/CASCADE options work on most kinds of DROP;
however, pg_depend is not yet very well populated with dependencies.
(Most of the ones that are present at this point just replace formerly
hardwired associations, such as the implicit drop of a relation's pg_type
entry when the relation is dropped.) Need to add more logic to create
dependency entries, improve pg_dump to dump constraints in place of
indexes and triggers, and add some regression tests.
This is the first cut toward CREATE CONVERSION/DROP CONVERSION implementaion.
The commands can now add/remove tuples to the new pg_conversion system
catalog, but that's all. Still need work to make them actually working.
Documentations, regression tests also need work.
RESTRICT/CASCADE syntax to the DROP commands that need it, and propagates
the behavioral option through the parser to the routines that execute
drops. Doesn't do anything useful yet, but I figured I'd commit these
changes so I could get out of the parser area while working on the rest.
GUC support. It's now possible to set datestyle, timezone, and
client_encoding from postgresql.conf and per-database or per-user
settings. Also, implement rollback of SET commands that occur in a
transaction that later fails. Create a SET LOCAL var = value syntax
that sets the variable only for the duration of the current transaction.
All per previous discussions in pghackers.
As proof of concept, provide an alternate implementation based on POSIX
semaphores. Also push the SysV shared-memory implementation into a
separate file so that it can be replaced conveniently.
messages more uniform and internationalizable: the global array
aclcheck_error_strings[] is gone in favor of a subroutine
aclcheck_error(). Partial implementation of namespace-related
permission checks --- not all done yet.
left a stub for a future "ALTER RULE RENAME" but did not write that one
yet. Bruce, if you want to add my name for for that I'll take it and do
it later.
Joe Conway
Use flex flags -CF. Pass the to-be-scanned string around as StringInfo
type, to avoid querying the length repeatedly. Clean up some code and
remove lex-compatibility cruft. Escape backslash sequences inline. Use
flex-provided yy_scan_buffer() function to set up input, rather than using
myinput().
DROP RULE and COMMENT ON RULE syntax adds an 'ON tablename' clause,
similar to TRIGGER syntaxes. To allow loading of existing pg_dump
files containing COMMENT ON RULE, the COMMENT code will still accept
the old syntax --- but only if the target rulename is unique across
the whole database.
have been divided according to the type of object manipulated - so ALTER
TABLE code is in tablecmds.c, aggregate commands in aggregatecmds.c and
so on.
A few common support routines remain in define.c (prototypes in
src/include/commands/defrem.h).
No code has been changed except for includes to reflect the new files.
The prototypes for aggregatecmds.c, functioncmds.c, operatorcmds.c,
and typecmds.c remain in src/include/commands/defrem.h.
From John Gray <jgray@azuli.co.uk>
in schemas other than the system namespace; however, there's no search
path yet, and not all operations work yet on tables outside the system
namespace.
addRangeTableEntry calls. Remove relname field from RTEs, since
it will no longer be a useful unique identifier of relations;
we want to encourage people to rely on the relation OID instead.
Further work on dumping qual expressions in EXPLAIN, too.
objects to be privilege-checked. Some change in their APIs would be
necessary no matter what in the schema environment, and simply getting
rid of the name-based interface entirely seems like the best way.
the parsetree representation. As yet we don't *do* anything with schema
names, just drop 'em on the floor; but you can enter schema-compatible
command syntax, and there's even a primitive CREATE SCHEMA command.
No doc updates yet, except to note that you can now extract a field
from a function-returning-row's result with (foo(...)).fieldname.
in the current code, the authentication logic (check user, check the
relation we're operating on, etc) is done in tcop/utility.c, whereas the
actual TRUNCATE command in done in TruncateRelation() in
commands/createinh.c (which is really just a wrapper over
heap_truncate() in catalog/heap.c). This patch moves the authentication
logic into TruncateRelation(), as well as making some minor code
cleanups.
Neil Conway
- domain.patch -> source patch against pgsql in cvs
- drop_domain.sgml and create_domain.sgml -> New doc/src/sgml/ref docs
- dominfo.txt -> basic domain related queries I used for testing
[ ADDED TO /doc]
Enables domains of array elements -> CREATE DOMAIN dom int4[3][2];
Uses a typbasetype column to describe the origin of the domain.
Copies data to attnotnull rather than processing in execMain().
Some documentation differences from earlier.
If this is approved, I'll start working on pg_dump, and a \dD <domain>
option in psql, and regression tests. I don't really feel like doing
those until the system table structure settles for pg_type.
CHECKS when added, will also be copied to to the table attributes. FK
Constraints (if I ever figure out how) will be done similarly. Both
will lbe handled by MergeDomainAttributes() which is called shortly
before MergeAttributes().
Rod Taylor
o Change all current CVS messages of NOTICE to WARNING. We were going
to do this just before 7.3 beta but it has to be done now, as you will
see below.
o Change current INFO messages that should be controlled by
client_min_messages to NOTICE.
o Force remaining INFO messages, like from EXPLAIN, VACUUM VERBOSE, etc.
to always go to the client.
o Remove INFO from the client_min_messages options and add NOTICE.
Seems we do need three non-ERROR elog levels to handle the various
behaviors we need for these messages.
Regression passed.
(current as of a few hours ago.)
This patch:
1. Adds PG_GETARG_xxx_P_SLICE() macros and associated support routines.
2. Adds routines in src/backend/access/tuptoaster.c for fetching only
necessary chunks of a toasted value. (Modelled on latest changes to
assume chunks are returned in order).
3. Amends text_substr and bytea_substr to use new methods. It now
handles multibyte cases -and should still lead to a performance
improvement in the multibyte case where the substring is near the
beginning of the string.
4. Added new command: ALTER TABLE tabname ALTER COLUMN colname SET
STORAGE {PLAIN | EXTERNAL | EXTENDED | MAIN} to parser and documented in
alter-table.sgml. (NB I used ColId as the item type for the storage
mode string, rather than a new production - I hope this makes sense!).
All this does is sets attstorage for the specified column.
4. AlterTableAlterColumnStatistics is now AlterTableAlterColumnFlags and
handles both statistics and storage (it uses the subtype code to
distinguish). The previous version of my patch also re-arranged other
code in backend/commands/command.c but I have dropped that from this
patch.(I plan to return to it separately).
5. Documented new macros (and also the PG_GETARG_xxx_P_COPY macros) in
xfunc.sgml. ref/alter_table.sgml also contains documentation for ALTER
COLUMN SET STORAGE.
John Gray
when to send what to which, prevent recursion by introducing new COMMERROR
elog level for client-communication problems, get rid of direct writes
to stderr in backend/libpq files, prevent non-error elogs from going to
client during the authentication cycle.
now just below FATAL in server_min_messages. Added more text to
highlight ordering difference between it and client_min_messages.
---------------------------------------------------------------------------
REALLYFATAL => PANIC
STOP => PANIC
New INFO level the prints to client by default
New LOG level the prints to server log by default
Cause VACUUM information to print only to the client
NOTICE => INFO where purely information messages are sent
DEBUG => LOG for purely server status messages
DEBUG removed, kept as backward compatible
DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1 added
DebugLvl removed in favor of new DEBUG[1-5] symbols
New server_min_messages GUC parameter with values:
DEBUG[5-1], INFO, NOTICE, ERROR, LOG, FATAL, PANIC
New client_min_messages GUC parameter with values:
DEBUG[5-1], LOG, INFO, NOTICE, ERROR, FATAL, PANIC
Server startup now logged with LOG instead of DEBUG
Remove debug_level GUC parameter
elog() numbers now start at 10
Add test to print error message if older elog() values are passed to elog()
Bootstrap mode now has a -d that requires an argument, like postmaster
before reporting command-complete message for the final command of a
query string. This way, any errors detected during finish_xact_command
(such as RI violations) will appear to be part of the final command,
rather than coming out after the command is reported complete. This
avoids confusing PQendcopy and other not-overly-bright clients.
Per Lee Harr's bug report of 25-Feb-02.
are now both invoked once per received SQL command (raw parsetree) from
pg_exec_query_string. BeginCommand is actually just an empty routine
at the moment --- all its former operations have been pushed into tuple
receiver setup routines in printtup.c. This makes for a clean distinction
between BeginCommand/EndCommand (once per command) and the tuple receiver
setup/teardown routines (once per ExecutorRun call), whereas the old code
was quite ad hoc. Along the way, clean up the calling conventions for
ExecutorRun a little bit.
report for each received SQL command, regardless of rewriting activity.
Also ensure that this report comes from the 'original' command, not the
last command generated by rewrite; this fixes 7.2 breakage for INSERT
commands that have actions added by rules. Fernando Nasser and Tom Lane.
Disallow CREATE INDEX on system catalogs, non-tables (views, sequences, etc).
Disallow CREATE/DROP TRIGGER on system catalogs, non-tables.
Disallow ALTER TABLE ADD/DROP CONSTRAINT on system catalogs.
Disallow FOREIGN KEY reference to non-table.
None of these things can actually work in the present system structure,
but the code was letting them pass without complaint.
macros, but only at explicit CHECK_FOR_INTERRUPTS() calls. Not clear
whether overenthusiastic acceptance of interrupts accounts for any real
bugs, but it definitely seems risky and unnecessary.
to use and significantly faster. This tweak saves 25% (!) of the runtime
of COPY IN in a test with 8000-character lines. I wouldn't normally
commit a performance improvement this late in the cycle, but 25% got
my attention...
per suggestion from Peter. Simplify several APIs by transmitting the
original argv location directly from main.c to ps_status.c, instead of
passing it down through several levels of subroutines.
subprocesses; perhaps this will fix portability problem just noted by
Lockhart. Also, move test for bad permissions of DataDir to a more
logical place.
bootstrap) check for a valid PG_VERSION file before looking at anything
else in the data directory. This fixes confusing error report when
trying to start current sources in a pre-7.1 data directory.
Per trouble report from Rich Shepard 10/18/01.
just after receipt of the startup packet. Now, postmaster children
that are waiting for client authentication response will show as
'postgres: user database host authentication'. Also, do an
init_ps_display for startup/shutdown/checkpoint subprocesses,
so that they are readily identifiable as well. Fix an obscure race
condition that could lead to Assert failure in the postmaster ---
attempting to start a checkpoint process before any connections have
been received led to calling PostmasterRandom before setting random_seed.
Modified the parser and the SET handlers to use full Node structures
rather than simply a character string argument.
Implement INTERVAL() YEAR TO MONTH (etc) syntax per SQL99.
Does not yet accept the goofy string format that goes along with, but
this should be fairly straight forward to fix now as a bug or later
as a feature.
Implement precision for the INTERVAL() type.
Use the typmod mechanism for both of INTERVAL features.
Fix the INTERVAL syntax in the parser:
opt_interval was in the wrong place.
INTERVAL is now a reserved word, otherwise we get reduce/reduce errors.
Implement an explicit date_part() function for TIMETZ.
Should fix coersion problem with INTERVAL reported by Peter E.
Fix up some error messages for date/time types.
Use all caps for type names within message.
Fix recently introduced side-effect bug disabling 'epoch' as a recognized
field for date_part() etc. Reported by Peter E. (??)
Bump catalog version number.
Rename "microseconds" current transaction time field
from ...Msec to ...Usec. Duh!
date/time regression tests updated for reference platform, but a few
changes will be necessary for others.
transformAlterStmt() use these routines, instead of having lots of
duplicate (not to mention should-have-been-duplicate) code.
Adding a column with a CHECK constraint actually works now,
and the tests to reject unsupported DEFAULT and NOT NULL clauses
actually fire now. ALTER TABLE ADD PRIMARY KEY works, modulo
having to have created the column(s) NOT NULL already.
readability. Bizarre '(long *) TRUE' return convention is gone,
in favor of just raising an error internally in dynahash.c when
we detect hashtable corruption. HashTableWalk is gone, in favor
of using hash_seq_search directly, since it had no hope of working
with non-LONGALIGNable datatypes. Simplify some other code that was
made undesirably grotty by promixity to HashTableWalk.
a hung client or lost connection can't indefinitely block a postmaster
child (not to mention the possibility of deliberate DoS attacks).
Timeout is controlled by new authentication_timeout GUC variable,
which I set to 60 seconds by default ... does that seem reasonable?
We will no longer try to send elog messages to the client before we have
initialized backend libpq (oops); however, reporting bogus commandline
switches via elog does work now (not irrelevant, because of PGOPTIONS).
Fix problem with inappropriate sending of checkpoint-process messages
to stderr.
pgsql-hackers. pg_opclass now has a row for each opclass supported by each
index AM, not a row for each opclass name. This allows pg_opclass to show
directly whether an AM supports an opclass, and furthermore makes it possible
to store additional information about an opclass that might be AM-dependent.
pg_opclass and pg_amop now store "lossy" and "haskeytype" information that we
previously expected the user to remember to provide in CREATE INDEX commands.
Lossiness is no longer an index-level property, but is associated with the
use of a particular operator in a particular index opclass.
Along the way, IndexSupportInitialize now uses the syscaches to retrieve
pg_amop and pg_amproc entries. I find this reduces backend launch time by
about ten percent, at the cost of a couple more special cases in catcache.c's
IndexScanOK.
Initial work by Oleg Bartunov and Teodor Sigaev, further hacking by Tom Lane.
initdb forced.
platforms system(2) gets confused unless the signal handler is set to
SIG_DFL, not SIG_IGN. pgstats.c now uses pqsignal() as it should,
not signal(). Also, arrange for the stats collector process to show
a reasonable ID in 'ps', rather than looking like a postmaster.
number in the data structure so that we can give at least a minimally
useful idea of where the mistake is when we issue syntax error messages.
Move the ClientAuthentication() call to where it should have been in
the first place, so that postmaster memory releasing can happen in a
reasonable place also. Update obsolete comments, correct one real bug
(auth_argument was not picked up correctly).
Note: I didn't force an initdb, figuring that one today was enough.
However, there is a new function in pg_proc.h, and pg_dump won't be
able to dump partial indexes until you add that function.
> > secure_ctx changes too. it will be PGC_BACKEND after '-p'.
>
> Oh, okay, I missed that part. Could we see the total state of the
> patch --- ie, a diff against current CVS, not a bunch of deltas?
> I've gotten confused about what's in and what's out.
Ok, here it is. Cleared the ctx comment too - after -p
it will be PGC_BACKEND in any case.
Marko Kreen
a new postmaster child process. This should eliminate problems with
authentication blocking (e.g., ident, SSL init) and also reduce problems
with the accept queue filling up under heavy load.
The option to send elog output to a different file per backend (postgres -o)
has been disabled for now because the initialization would have to happen
in a different order and it's not clear we want to keep this anyway.
Here is Tomified version of my 2 pending patches.
Dropped the set_.._real change as it is not needed.
Desc would be:
* use GUC for settings from cmdline
Marko Kreen
datatypes, not only strings. parse_hook is useless for bool, I suppose,
but it seems possibly useful for int and double to apply variable-specific
constraints that are more complex than simple range limits. assign_hook
is definitely useful for all datatypes --- we need it right now for bool
to support date cache reset when changing Australian timezone rule setting.
Also, clean up some residual problems with the reset all/show all patch,
including memory leaks and mistaken reset of PostPortNumber. It seems
best that RESET ALL not touch variables that don't have SUSET or
USERSET context.
for GRANT/REVOKE is now just that, not "CHANGE".
On the way, migrate some of the aclitem internal representation away from
the parser and build a real parse tree instead. Also add some 'const'
qualifiers.
calls. This has never actually cached anything, because postgres.c does
each fastpath call as a separate transaction command, and so fastpath.c
would always decide that its cache was outdated. If it had worked, it
would now be failing for calls of oldstyle functions due to dangling
pointers in the FmgrInfo struct. Rip it out for simplicity and bug-
proofing.
a separate statement (though it can still be invoked as part of VACUUM, too).
pg_statistic redesigned to be more flexible about what statistics are
stored. ANALYZE now collects a list of several of the most common values,
not just one, plus a histogram (not just the min and max values). Random
sampling is used to make the process reasonably fast even on very large
tables. The number of values and histogram bins collected is now
user-settable via an ALTER TABLE command.
There is more still to do; the new stats are not being used everywhere
they could be in the planner. But the remaining changes for this project
should be localized, and the behavior is already better than before.
A not-very-related change is that sorting now makes use of btree comparison
routines if it can find one, rather than invoking '<' twice.