The xml type previously rejected "content" that is empty or consists
only of spaces. But the SQL/XML standard allows that, so change that.
The accepted values for XML "documents" are not changed.
Reviewed-by: Ali Akbar <the.apaan@gmail.com>
Now that ALTER TABLE .. ALL IN TABLESPACE has replaced the previous
ALTER TABLESPACE approach, it makes sense to move the calls down in
to ProcessUtilitySlow where the rest of ALTER TABLE is handled.
This also means that event triggers will support ALTER TABLE .. ALL
(which was the impetus for the original change, though it has other
good qualities also).
Álvaro Herrera
Back-patch to 9.4 as the original rework was.
Some Sparc CPUs can be run in various coherence models, ranging from
RMO (relaxed) over PSO (partial) to TSO (total). Solaris has always
run CPUs in TSO mode while in userland, but linux didn't use to and
the various *BSDs still don't. Unfortunately the sparc TAS/S_UNLOCK
were only correct under TSO. Fix that by adding the necessary memory
barrier instructions. On sparcv8+, which should be all relevant CPUs,
these are treated as NOPs if the current consistency model doesn't
require the barriers.
Discussion: 20140630222854.GW26930@awork2.anarazel.de
Will be backpatched to all released branches once a few buildfarm
cycles haven't shown up problems. As I've no access to sparc, this is
blindly written.
psql's \s (print command history) doesn't work at all with recent libedit
versions when printing to the terminal, because libedit tries to do an
fchmod() on the target file which will fail if the target is /dev/tty.
(We'd already noted this in the context of the target being /dev/null.)
Even before that, it didn't work pleasantly, because libedit likes to
encode the command history file (to ensure successful reloading), which
renders it nigh unreadable, not to mention significantly different-looking
depending on exactly which libedit version you have. So let's forget using
write_history() for this purpose, and instead print the data ourselves,
using logic similar to that used to iterate over the history for newline
encoding/decoding purposes.
While we're at it, insert the ability to use the pager when \s is printing
to the terminal. This has been an acknowledged shortcoming of \s for many
years, so while you could argue it's not exactly a back-patchable bug fix
it still seems like a good improvement. Anyone who's seriously annoyed
at this can use "\s /dev/tty" or local equivalent to get the old behavior.
Experimentation with this showed that the history iteration logic was
actually rather broken when used with libedit. It turns out that with
libedit you have to use previous_history() not next_history() to advance
to more recent history entries. The easiest and most robust fix for this
seems to be to make a run-time test to verify which function to call.
We had not noticed this because libedit doesn't really need the newline
encoding logic: its own encoding ensures that command entries containing
newlines are reloaded correctly (unlike libreadline). So the effective
behavior with recent libedits was that only the oldest history entry got
newline-encoded or newline-decoded. However, because of yet other bugs in
history_set_pos(), some old versions of libedit allowed the existing loop
logic to reach entries besides the oldest, which means there may be libedit
~/.psql_history files out there containing encoded newlines in more than
just the oldest entry. To ensure we can reload such files, it seems
appropriate to back-patch this fix, even though that will result in some
incompatibility with older psql versions (ie, multiline history entries
written by a psql with this fix will look corrupted to a psql without it,
if its libedit is reasonably up to date).
Stepan Rutz and Tom Lane
The old claim is from my commit d06ebdb8d3 of
2000-07-17, but it seems to have been a plain old thinko; sum(float4) has
been distinct from sum(float8) since Berkeley days. Noted by KaiGai Kohei.
While at it, mention the existence of sum(money), which is also of
embarrassingly ancient vintage.
Update the tab completion for the changes made in
3c4cf08087, which rework 'MOVE ALL' to be
'ALTER .. ALL IN TABLESPACE'.
Fujii Masao
Back-patch to 9.4, as the original change was.
The link to the NIST web page about DES standards leads to nowhere, and
according to archive.org has been forwarded to an unrelated page for
many years. Therefore, just remove that link. More up to date
information can be found via Wikipedia, for example.
Previously \watch could not display the query execution time even
when \timing was enabled because it used PSQLexec instead of
SendQuery and that function didn't support \timing. This patch
introduces PSQLexecWatch and changes \watch so as to use it, instead.
PSQLexecWatch is the function to run the query, print its results and
display how long it took (only when \timing is enabled).
This patch also changes --echo-hidden so that it doesn't print
the query that \watch executes. Since \watch cannot execute
backslash command queries, they should not be printed even
when --echo-hidden is set.
Patch by me, review by Heikki Linnakangas and Michael Paquier
The number of % parameter markers in RAISE statement should match the number
of parameters given. We used to check that at execution time, but we have
all the information needed at compile time, so let's check it at compile
time instead. It's generally better to find mistakes earlier.
Marko Tiikkaja, reviewed by Fabien Coelho
Every redo routine uses the same idiom to determine what to do to a page:
check if there's a backup block for it, and if not read, the buffer if the
block exists, and check its LSN. Refactor that into a common function,
XLogReadBufferForRedo, making all the redo routines shorter and more
readable.
This has no user-visible effect, and makes no changes to the WAL format.
Reviewed by Andres Freund, Alvaro Herrera, Michael Paquier.
The new %l substitution shows the line number inside a (potentially
multi-line) statement starting from one.
Author: Sawada Masahiko, heavily editorialized by me.
Reviewed-By: Jeevan Chalke, Alvaro Herrera
This patch allows us to execute ALTER SYSTEM RESET command to
remove the configuration entry from postgresql.auto.conf.
Vik Fearing, reviewed by Amit Kapila and me.
The regression tests for contrib/test_decoding regularly failed on
postgres instances that were very slow. Either because the hardware
itself was slow or because very expensive debugging options like
CLOBBER_CACHE_ALWAYS were used.
The reason they failed was just that some additional transactions were
decoded. Analyze and vacuum, triggered by autovac.
To fix just add a option to test_decoding to only display transactions
in which a change was actually displayed. That's not pretty because it
removes information from the tests; but better than constantly failing
tests in very likely harmless ways.
Backpatch to 9.4 where logical decoding was introduced.
Discussion: 20140629142511.GA26930@awork2.anarazel.de
68a2e52bba has introduced LWLockAcquireCommon() containing the
previous contents of LWLockAcquire() plus added functionality. The
latter then calls it, just like LWLockAcquireWithVar(). Because the
majority of callers don't need the added functionality, declare the
common code as inline. The compiler then can optimize away the unused
code. Doing so is also useful when looking at profiles, to
differentiate the users.
Backpatch to 9.4, the first branch to contain LWLockAcquireCommon().
Errors detected using Topy (https://github.com/intgr/topy), all
changes verified by hand and some manual tweaks added.
Marti Raudsepp
Individual changes backpatched, where applicable, as far as 9.0.
Since the dawn of time (aka Postgres95) multiple pins of the same
buffer by one backend have been optimized not to modify the shared
refcount more than once. This optimization has always used a NBuffer
sized array in each backend keeping track of a backend's pins.
That array (PrivateRefCount) was one of the biggest per-backend memory
allocations, depending on the shared_buffers setting. Besides the
waste of memory it also has proven to be a performance bottleneck when
assertions are enabled as we make sure that there's no remaining pins
left at the end of transactions. Also, on servers with lots of memory
and a correspondingly high shared_buffers setting the amount of random
memory accesses can also lead to poor cpu cache efficiency.
Because of these reasons a backend's buffers pins are now kept track
of in a small statically sized array that overflows into a hash table
when necessary. Benchmarks have shown neutral to positive performance
results with considerably lower memory usage.
Patch by me, review by Robert Haas.
Discussion: 20140321182231.GA17111@alap3.anarazel.de
The list of posting lists it's dealing with can contain placeholders for
deleted posting lists. The placeholders are kept around so that they can
be WAL-logged, but we must be careful to not try to access them.
This fixes bug #11280, reported by Mårten Svantesson. Backpatch to 9.4,
where the compressed data leaf page code was added.
Commit a16bac36ec let "configure" detect
the system getaddrinfo() when building under 64-bit MinGW-w64. However,
src/include/port/win32/sys/socket.h assumes all native Windows
configurations use our replacement. This change placates buildfarm
member jacana until we establish a plan for getaddrinfo() on Windows.
In commit 45e02e3232, we intentionally
disallowed updates on individual elements of oidvector columns. While that
still seems like a sane idea in the abstract, we (I) forgot that citext's
"upgrade from unpackaged" script did in fact perform exactly such updates,
in order to fix the problem that citext indexes should have a collation
but would not in databases dumped or upgraded from pre-9.1 installations.
Even if we wanted to add casts to allow such updates, there's no practical
way to do so in the back branches, so the only real alternative is to make
citext's kluge even klugier. In this patch, I cast the oidvector to text,
fix its contents with regexp_replace, and cast back to oidvector. (Ugh!)
Since the aforementioned commit went into all active branches, we have to
fix this in all branches that contain the now-broken update script.
Per report from Eric Malm.
This reverts commit e23014f3d4.
As the side effect of the reverted commit, when the unit is
specified, the reloption was stored in the catalog with the unit.
This broke pg_dump (specifically, it prevented pg_dump from
outputting restorable backup regarding the reloption) and
turned the buildfarm red. Revert the commit until the fixed
version is ready.
This is useful to allow to set GUCs to values that include spaces;
something that wasn't previously possible. The primary case motivating
this is the desire to set default_transaction_isolation to 'repeatable
read' on a per connection basis, but other usecases like seach_path do
also exist.
This introduces a slight backward incompatibility: Previously a \ in
an option value would have been passed on literally, now it'll be
taken as an escape.
The relevant mailing list discussion starts with
20140204125823.GJ12016@awork2.anarazel.de.
This introduces an infrastructure which allows us to specify the units
like ms (milliseconds) in integer relation option, like GUC parameter.
Currently only autovacuum_vacuum_cost_delay reloption can accept
the units.
Reviewed by Michael Paquier
Previously, only a single-byte character was allowed as an
escape. This patch allows it to be a multi-byte character, though it
still must be a single character.
Reviewed by Heikki Linnakangas and Tom Lane.
Peter Eisentraut
Stephen Frost
Andres Freund
Tom Lane
Bruce Momjian
Fujii Masao
Robert Haas
Heikki Linnakangas
Kevin Grittner
Noah Misch
Jeff Davis