to validate the realm of the connecting user. By default
it's empty meaning no verification, which is the way
Kerberos authentication has traditionally worked in
PostgreSQL.
the same transaction can be identified even when no regular XID was assigned.
This seems essential after addition of the lazy-XID patch. Also some
minor code cleanup in write_csvlog().
- create a separate archive_mode GUC, on which archive_command is dependent
- %r option in recovery.conf sends last restartpoint to recovery command
- %r used in pg_standby, updated README
- minor other code cleanup in pg_standby
- doc on Warm Standby now mentions pg_standby and %r
- log_restartpoints recovery option emits LOG message at each restartpoint
- end of recovery now displays last transaction end time, as requested
by Warren Little; also shown at each restartpoint
- restart archiver if needed to carry away WAL files at shutdown
Simon Riggs
buffers that cannot possibly need to be cleaned, and estimates how many
buffers it should try to clean based on moving averages of recent allocation
requests and density of reusable buffers. The patch also adds a couple
more columns to pg_stat_bgwriter to help measure the effectiveness of the
bgwriter.
Greg Smith, building on his own work and ideas from several other people,
in particular a much older patch from Itagaki Takahiro.
* stats_start_collector goes away; we always start the collector process,
unless prevented by a problem with setting up the stats UDP socket.
* stats_reset_on_server_start goes away; it seems useless in view of the
availability of pg_stat_reset().
* stats_block_level and stats_row_level are merged into a single variable
"track_counts", which controls all reports sent to the collector process.
* stats_command_string is renamed to track_activities.
* log_autovacuum is renamed to log_autovacuum_min_duration to better reflect
its meaning.
The log_autovacuum change is not a compatibility issue since it didn't exist
before 8.3 anyway. The other changes need to be release-noted.
rows will normally never obtain an XID at all. We already did things this way
for subtransactions, but this patch extends the concept to top-level
transactions. In applications where there are lots of short read-only
transactions, this should improve performance noticeably; not so much from
removal of the actual XID-assignments, as from reduction of overhead that's
driven by the rate of XID consumption. We add a concept of a "virtual
transaction ID" so that active transactions can be uniquely identified even
if they don't have a regular XID. This is a much lighter-weight concept:
uniqueness of VXIDs is only guaranteed over the short term, and no on-disk
record is made about them.
Florian Pflug, with some editorialization by Tom.
displayed in the postmaster log. This avoids Windows-specific problems with
localized time zone names that are in the wrong encoding, and generally seems
like a good idea to forestall other potential platform-dependent issues.
To preserve the existing behavior that all backends will log in the same time
zone, create a new GUC variable log_timezone that can only be changed on a
system-wide basis, and reference log-related calculations to that zone instead
of the TimeZone variable.
This fixes the issue reported by Hiroshi Saito that timestamps printed by
xlog.c startup could be improperly localized on Windows. We still need a
simpler patch for that problem in the back branches, however.
so that we will be able to create a cookie for all processes for CSVlogs.
It is set wherever MyProcPid is set. Take the opportunity to remove the now
unnecessary session-only restriction on the %s and %c escapes in log_line_prefix.
before reporting a transaction committed. Data consistency is still
guaranteed (unlike setting fsync = off), but a crash may lose the effects
of the last few transactions. Patch by Simon, some editorialization by Tom.
and fsync WAL at convenient intervals. For the moment it just tries to
offload this work from backends, but soon it will be responsible for
guaranteeing a maximum delay before asynchronously-committed transactions
will be flushed to disk.
This is a portion of Simon Riggs' async-commit patch, committed to CVS
separately because a background WAL writer seems like it might be a good idea
independently of the async-commit feature. I rebased walwriter.c on
bgwriter.c because it seemed like a more appropriate way of handling signals;
while the startup/shutdown logic in postmaster.c is more like autovac because
we want walwriter to quit before we start the shutdown checkpoint.
I/O utilization, per discussion.
While at it, lower the autovacuum vacuum and analyze threshold values to 50
tuples. It is a bit higher (i.e. more conservative) than what I originally
proposed but much better than the old values for small tables.
over a fairly long period of time, rather than being spat out in a burst.
This happens only for background checkpoints carried out by the bgwriter;
other cases, such as a shutdown checkpoint, are still done at full speed.
Remove the "all buffers" scan in the bgwriter, and associated stats
infrastructure, since this seems no longer very useful when the checkpoint
itself is properly throttled.
Original patch by Itagaki Takahiro, reworked by Heikki Linnakangas,
and some minor API editorialization by me.
provide visual separation from the rest of the log line; I've been
noticing lately that quite a few newbies fail to figure this out for
themselves. Also a little editorial cleanup of the log_line_prefix
description.
within a signal handler (this might be safe given the relatively narrow code
range in which the interrupt is enabled, but it seems awfully risky); do issue
more informative log messages that tell what is being waited for and the exact
length of the wait; minor other code cleanup. Greg Stark and Tom Lane
for each temp file, rather than once per sort or hashjoin; this allows
spreading the data of a large sort or join across multiple tablespaces.
(I remain dubious that this will make any difference in practice, but certain
people insisted.) Arrange to cache the results of parsing the GUC variable
instead of recomputing from scratch on every demand, and push usage of the
cache down to the bottommost fd.c level.
tablespace(s) in which to store temp tables and temporary files. This is a
list to allow spreading the load across multiple tablespaces (a random list
element is chosen each time a temp object is to be created). Temp files are
not stored in per-database pgsql_tmp/ directories anymore, but per-tablespace
directories.
Jaime Casanova and Albert Cervera, with review by Bernd Helmle and Tom Lane.
"autovacuum = off", the system may still periodically start autovacuum
processes to prevent XID wraparound. Patch from David Fetter, with
editorializing.
This is needed to allow a security-definer function to set a truly secure
value of search_path. Without it, a malicious user can use temporary objects
to execute code with the privileges of the security-definer function. Even
pushing the temp schema to the back of the search path is not quite good
enough, because a function or operator at the back of the path might still
capture control from one nearer the front due to having a more exact datatype
match. Hence, disable searching the temp schema altogether for functions and
operators.
Security: CVE-2007-2138
processes to be running simultaneously. Also, now autovacuum processes do not
count towards the max_connections limit; they are counted separately from
regular processes, and are limited by the new GUC variable
autovacuum_max_workers.
The launcher now has intelligence to launch workers on each database every
autovacuum_naptime seconds, limited only on the max amount of worker slots
available.
Also, the global worker I/O utilization is limited by the vacuum cost-based
delay feature. Workers are "balanced" so that the total I/O consumption does
not exceed the established limit. This part of the patch was contributed by
ITAGAKI Takahiro.
Per discussion.
rules to be defined with different, per session controllable, behaviors
for replication purposes.
This will allow replication systems like Slony-I and, as has been stated
on pgsql-hackers, other products to control the firing mechanism of
triggers and rewrite rules without modifying the system catalog directly.
The firing mechanisms are controlled by a new superuser-only GUC
variable, session_replication_role, together with a change to
pg_trigger.tgenabled and a new column pg_rewrite.ev_enabled. Both
columns are a single char data type now (tgenabled was a bool before).
The possible values in these attributes are:
'O' - Trigger/Rule fires when session_replication_role is "origin"
(default) or "local". This is the default behavior.
'D' - Trigger/Rule is disabled and fires never
'A' - Trigger/Rule fires always regardless of the setting of
session_replication_role
'R' - Trigger/Rule fires when session_replication_role is "replica"
The GUC variable can only be changed as long as the system does not have
any cached query plans. This will prevent changing the session role and
accidentally executing stored procedures or functions that have plans
cached that expand to the wrong query set due to differences in the rule
firing semantics.
The SQL syntax for changing a triggers/rules firing semantics is
ALTER TABLE <tabname> <when> TRIGGER|RULE <name>;
<when> ::= ENABLE | ENABLE ALWAYS | ENABLE REPLICA | DISABLE
psql's \d command as well as pg_dump are extended in a backward
compatible fashion.
Jan
log_min_messages does; and arrange to suppress the duplicative output
that would otherwise result from log_statement and log_duration messages.
Bruce Momjian and Tom Lane.
o read global SSL configuration file
o add GUC "ssl_ciphers" to control allowed ciphers
o add libpq environment variable PGSSLKEY to control SSL hardware keys
Victor B. Wagner
Peter Eisentraut
Bruce Momjian
Tom Lane
Magnus Hagander
Neil Conway
Andrew Dunstan
Alvaro Herrera
Jan Wieck