Modify pg_dump --binary-upgrade and add backend support routines to
support the preservation of pg_type oids when doing a binary upgrade.
This allows user-defined composite types and arrays to be binary
upgraded.
Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
short-circuit the rather expensive identify_system_timezone() procedure,
which we have no real need for during initdb since nothing done here depends
on the timezone setting. Since we launch quite a few standalone backends
during the initdb sequence, this adds up to a significant savings, and seems
worth doing to save developer time even though it will hardly matter to end
users. Per my report today on pgsql-hackers.
pg_ctl gets a new mode that runs initdb. Adjust the documentation a bit to
not assume that initdb is the only way to run database cluster initialization.
But don't replace initdb as the canonical way.
Author: Zdenek Kotala <Zdenek.Kotala@Sun.COM>
support any indexable commutative operator, not just equality. Two rows
violate the exclusion constraint if "row1.col OP row2.col" is TRUE for
each of the columns in the constraint.
Jeff Davis, reviewed by Robert Haas
in the formerly-always-blank columns just to left and right of the data.
Different marking is used for a line break caused by a newline in the data
than for a straight wraparound. A newline break is signaled by a "+" in the
right margin column in ASCII mode, or a carriage return arrow in UNICODE mode.
Wraparound is signaled by a dot in the right margin as well as the following
left margin in ASCII mode, or an ellipsis symbol in the same places in UNICODE
mode. "\pset linestyle old-ascii" is added to make the previous behavior
available if anyone really wants it.
In passing, this commit also cleans up a few regression test files that
had unintended spacing differences from the current actual output.
Roger Leigh, reviewed by Gabrielle Roth and other members of PDXPUG.
checked to determine whether the trigger should be fired.
For BEFORE triggers this is mostly a matter of spec compliance; but for AFTER
triggers it can provide a noticeable performance improvement, since queuing of
a deferred trigger event and re-fetching of the row(s) at end of statement can
be short-circuited if the trigger does not need to be fired.
Takahiro Itagaki, reviewed by KaiGai Kohei.
Per discussion, this should result in defaulting to SQL_ASCII encoding.
The original coding could not support that because it conflated selection
of SQL_ASCII encoding with not being able to determine the encoding.
Adjust pg_get_encoding_from_locale()'s API to distinguish these cases,
and fix callers appropriately. Only initdb actually changes behavior,
since the other callers were perfectly content to consider these cases
equivalent.
Per bug #5178 from Boh Yap. Not going to bother back-patching, since
no one has complained before and there's an easy workaround (namely,
specify the encoding you want).
directly. This was a lot of trouble, but should be worth it in terms of
not having to keep the plpgsql lexer in step with core anymore. In addition
the handling of keywords is significantly better-structured, allowing us to
de-reserve a number of words that plpgsql formerly treated as reserved.
mainloop.c. This ensures that postgres_fe.h is read before including
any system headers, which is necessary to avoid problems on some platforms
where we make nondefault selections of feature macros for stdio.h or
other headers. We have had this policy for flex modules in the backend
for many years, but for some reason it was not applied to psql.
Per trouble report from Alexandra Roy and diagnosis by Albe Laurenz.
are named in the UPDATE's SET list.
Note: the schema of pg_trigger has not actually changed; we've just started
to use a column that was there all along. catversion bumped anyway so that
this commit is included in the history of potentially interesting changes
to system catalog contents.
Itagaki Takahiro
ASCII-art style of table output to be upgraded to use Unicode box drawing
characters if desired. By default, psql will use the Unicode characters
whenever client_encoding is UTF8.
The patch forces linestyle=ascii in pg_regress usage, ensuring we don't
break the regression tests in Unicode locales.
Roger Leigh
Add a variant of pg_get_triggerdef with a second argument "pretty" that
causes the output to be formatted in the way pg_dump used to do. Use this
variant in pg_dump with server versions >= 8.5.
This insulates pg_dump from most future trigger feature additions, such as
the upcoming column triggers patch.
Author: Itagaki Takahiro <itagaki.takahiro@oss.ntt.co.jp>
Create a new catalog pg_db_role_setting where they are now stored, and better
encapsulate the code that deals with settings into its realm. The old
datconfig and rolconfig columns are removed.
psql has gained a \drds command to display the settings.
Backwards compatibility warning: while the backwards-compatible system views
still have the config columns, they no longer completely represent the
configuration for a user or database.
Catalog version bumped.
the privileges that will be applied to subsequently-created objects.
Such adjustments are always per owning role, and can be restricted to objects
created in particular schemas too. A notable benefit is that users can
override the traditional default privilege settings, eg, the PUBLIC EXECUTE
privilege traditionally granted by default for functions.
Petr Jelinek
to create a function for it.
Procedural languages now have an additional entry point, namely a function
to execute an inline code block. This seemed a better design than trying
to hide the transient-ness of the code from the PL. As of this patch, only
plpgsql has an inline handler, but probably people will soon write handlers
for the other standard PLs.
In passing, remove the long-dead LANCOMPILER option of CREATE LANGUAGE.
Petr Jelinek
Instead of requiring translators to translate the entire SQL command
synopses, change create_help.pl to only require them to translate the
placeholders, and paste those into the synopsis using a printf mechanism.
Make some small updates to the markup to make it easier to parse.
Note: This causes msgmerge of gettext 0.17 to segfault. You will need
the patch from https://savannah.gnu.org/bugs/?27474 to make it work.
msgmerge usually only runs on babel.postgresql.org, however.
append_history(), if libreadline is new enough to have those functions
(they seem to be present at least since 4.2; but libedit may not have them).
This gives significantly saner behavior when two or more sessions overlap in
their use of the history file; although having two sessions exit at just the
same time is still perilous to your history. The behavior of \s remains
unchanged, ie, overwrite whatever was there.
Per bug #5052 from Marek Wójtowicz.
use that value when the backend is new enough to allow it. This responds
to bug report from Keh-Cheng Chu pointing out that although 2 extra digits
should be sufficient to dump and restore float8 exactly, it is possible to
need 3 extra digits for float4 values.
flat password file, because it never will anymore. We had managed to
miss this during the recent flat-file-ectomy because it only happens if
--pwfile or --pwprompt is specified to initdb. Apparently, few hackers
use those. Reported by Erik Rijkers.
(could happen if either postgresql.conf or postmaster.opts is empty).
It's been broken since the C version was written for 8.0, so patch
all the way back.
initdb's copy of the function is broken in the same way, but it's
less important there since the input files should never be empty.
Patch that in HEAD only, and also fix some cosmetic differences that
crept into that copy of the function.
Per report from Corry Haines and Jeff Davis.
Recent commits have removed the various uses it was supporting. It was a
performance bottleneck, according to bug report #4919 by Lauris Ulmanis; seems
it slowed down user creation after a billion users.
XID) in checkpoint records. This eliminates the need to recompute the value
from scratch during database startup, which is one of the two remaining
reasons for the flatfile code to exist. It should also simplify life for
hot-standby operation.
To avoid bloating the checkpoint records unreasonably, I switched from
tracking the oldest database by name to tracking it by OID. This turns
out to save cycles in general (everywhere but the warning-generating
paths, which we hardly care about) and also helps us deal with the case
that the oldest database got dropped instead of being vacuumed. The prior
coding might go for a long time without updating the wrap limit in that case,
which is bad because it might result in a lot of useless autovacuum activity.
source directory even for out-of-tree builds. They are now alsl built in
the build tree. This should be more convenient for certain developers'
workflows, and shouldn't really break anything else.
script.
To do this, have pg_ctl pass down its parent shell's PID in an environment
variable PG_GRANDPARENT_PID, and teach CreateLockFile() to disregard that PID
as a false match if it finds it in postmaster.pid. This allows us to cope
with one level of postgres-owned shell process even with pg_ctl in the way,
so it's just as safe as starting the postmaster directly. You still have to
be careful about how you write the initscript though.
Adjust the comments in contrib/start-scripts/ to not deprecate use of
pg_ctl. Also, fix the ROTATELOGS option in the OSX script, which was
indulging in exactly the sort of unsafe coding that renders this fix
pointless :-(. A pipe inside the "sudo" will probably result in more
than one postgres-owned process hanging around.
Update install-sh to that from Autoconf 2.63, plus our Darwin-specific
changes (which I simplified a bit). install-sh is now able to install
multiple files in one run, so we could simplify our makefiles sometime.
install-sh also now has a -d option to create directories, so we don't need
mkinstalldirs anymore.
Use AC_PROG_MKDIR_P in configure.in, so we can use mkdir -p when available
instead of install-sh -d. For consistency with the rest of the world,
the corresponding make variable has been renamed from $(mkinstalldirs) to
$(MKDIR_P).
#include the version of history.h that is in the same directory as the
readline.h we are using. This avoids problems in some scenarios where both
readline and editline are installed. Report and patch by Zdenek Kotala.
two new lists, rather than repeatedly rescanning the main TOC list.
This avoids a potential O(N^2) slowdown, although you'd need a *lot*
of tables to make that really significant; and it might simplify future
improvements in the scheduling algorithm by making the set of ready
items more easily inspectable. The original thought that it would
in itself result in a more efficient job dispatch order doesn't seem
to have been borne out in testing, but it seems worth doing anyway.
Test coverage support now covers the entire source tree, including
contrib, instead of just src/backend. In a related but independent
development, the commands make coverage and make coverage-html can be run
in any directory.
This turned out to be much easier than feared. Besides a few ad hoc fixes
to pass the make target down the tree, change all affected makefiles to
list their directories in the SUBDIRS variable, changed from variants like
DIRS and WANTED_DIRS. MSVC build fix was attempted as well.
when we reach the post-COPY "pump it dry" error recovery code that was added
2006-11-24. Per a report from Neil Best, there is at least one code path
in which this occurs, leading to an infinite loop in code that's supposed
to be making it more robust not less so. A reasonable response seems to be
to call PQputCopyEnd() again, so let's try that.
Back-patch to all versions that contain the cleanup loop.
The previous implementation got it right in most cases but failed in one:
if you pg_dump into an archive with standard_conforming_strings enabled, then
pg_restore to a script file (not directly to a database), the script will set
standard_conforming_strings = on but then emit large object data as
nonstandardly-escaped strings.
At the moment the code is made to emit hex-format bytea strings when dumping
to a script file. We might want to change to old-style escaping for backwards
compatibility, but that would be slower and bulkier. If we do, it's just a
matter of reimplementing appendByteaLiteral().
This has been broken for a long time, but given the lack of field complaints
I'm not going to worry about back-patching.
Both hex format and the traditional "escape" format are automatically
handled on input. The output format is selected by the new GUC variable
bytea_output.
As committed, bytea_output defaults to HEX, which is an *incompatible
change*. We will keep it this way for awhile for testing purposes, but
should consider whether to switch to the more backwards-compatible
default of ESCAPE before 8.5 is released.
Peter Eisentraut
The current implementation fires an AFTER ROW trigger for each tuple that
looks like it might be non-unique according to the index contents at the
time of insertion. This works well as long as there aren't many conflicts,
but won't scale to massive unique-key reassignments. Improving that case
is a TODO item.
Dean Rasheed
Changes:
Pass in the keyword lookup array instead of having it be hardwired.
(This incidentally allows elimination of some duplicate coding in ecpg.)
Re-order the token declarations in gram.y so that non-keyword tokens have
numbers that won't change when keywords are added or removed.
Add ".." and ":=" to the set of tokens recognized by scan.l. (Since these
combinations are nowhere legal in core SQL, this does not change anything
except the precise wording of the error you get when you write this.)
For servers older than 8.3, sort display of child tables by relname instead
of oid::regclass::text, because the cast from regclass to text did not work
back then. The older display may be slightly worse when different schemas
are involved, but that should be rare enough.
Safely schema-qualify the pg_get_indexdef call, make the query a bit
prettier in -E mode, remove useless join to pg_index, make it more obvious
that the header[] array is not overrun.
This adds a column called "Definition" to the output of psql \d on an
index, which shows the full expression behind the index column. For indexes
on plain columns, this is redundant, but for expression indexes, this
reveals the real expression.
Author: Khee Chin <kheechin@gmail.com>
As per discussion, \d shows only the number of child tables, because that
could be hundreds, when used for partitioning. \d+ shows the actual list.
Author: Damien Clochard <damien@dalibo.info>
used to work as intended, but got broken some time ago (a quoted empty string
is not an empty string), and got broken some more by the changes to generate
ecpg's preproc.y automatically. Given all the unprotected uses of $(PERL)
elsewhere, it seems best to make use of the $(missing) script rather than
trying to ensure each such use is protected individually. Also fix various
bits of documentation that omitted to mention Perl as a requirement for
building from a CVS pull. Per a complaint from Robert Haas.
cosmetic --- I'm wondering if geteuid could have side effects on errno,
thus possibly resulting in a misleading error message after failure of
getpwuid.
throwing an error as 8.4 had been doing. The error interfered with porting
old database definitions (particularly for pg_migrator) without really buying
any safety. Per bug #4817 and subsequent discussion.
an expression that's not supposed to contain variables. Per discussion
with Gevik Babakhani, this eliminates the need for an ugly kluge (namely,
specifying some unrelated relation name). Remove one such kluge from
pg_dump.
in its CREATE DATABASE commands only for databases that have settings
different from the installation defaults. This is a low-tech method of
avoiding unnecessary platform dependencies in dump files. Eventually we ought
to have a platform-independent way of specifying LC_COLLATE and LC_CTYPE, but
that's not going to happen for 8.4, and this patch at least avoids the issue
for people who aren't setting up per-database locales. ENCODING doesn't have
the platform dependency problem, but it seems consistent to make it act the
same as the locale settings.
If a currently running item needs an exclusive lock on any item that the candidate items needs
any sort of lock on, or vice versa, then the candidate item is not allowed to run now, and
must wait till later.
tablespaces in an order that has some chance of working.
Per a complaint from Kevin Bailey.
This is a pre-existing bug, but given the lack of prior complaints I'm
not sure it's worth back-patching. In most cases failure of the DROP
commands wouldn't be that important anyway.
In passing, fix syntax errors in dumpCreateDB()'s queries for old servers;
these were apparently introduced in recent binary_upgrade patch.
cstring from the output of \df. Now that the default behavior is to
exclude all system functions, the de-cluttering rationale for this behavior
seems pretty weak; and it was always quite confusing/unhelpful if you were
actually looking for I/O functions. (Not to mention if you were looking
for encoding converters or other cases that might take or return cstring.)
are using our own ports of getopt or getopt_long, those will define
the variable for themselves; and if not, we don't need these, because
we never touch the variable anyway.
In the backend, I changed only a handful of exemplary or important-looking
instances to make use of the plural support; there is probably more work
there. For the rest of the source, this should cover all relevant cases.
is still available, but you must now write the long equivalent --inserts
or --column-inserts. This change is made to eliminate confusion with the
use of -d to specify a database name in most other Postgres client programs.
Original patch by Greg Mullane, modified per subsequent discussion.
running pg_restore, which might run in parallel).
Only reopen archive file when we really need to read from it, in parallel code. Otherwise,
close it immediately in a worker, if possible.
kwlist.h, to avoid having to link the backend object file into other programs
like pg_dump. We can now simply symlink a single source file from the backend
(kwlookup.c, containing the shared routine ScanKeywordLookup) and compile it
locally, which is a lot cleaner.
missing.
Since this touches most lines of the help output, also change the mix of
puts and printf calls to printf everywhere, for easier code editing and
reviewing.
wrappers (similar to procedural languages). This way we don't need to retain
the nearly empty libraries, and we are more free in how to implement the
wrapper API in the future.
post-data step is run in a separate worker child (a thread on Windows, a child
process elsewhere) up to the concurrent number specified by the new pg_restore
command-line --multi-thread | -m switch.
Andrew Dunstan, with some editing by Tom Lane.
qualifier, and add support for this in pg_dump.
This allows TOAST tables to have user-defined fillfactor, and will also
enable us to move the autovacuum parameters to reloptions without taking
away the possibility of setting values for TOAST tables.
showing system tables, make \dS pattern show system table details, and
have \dtS show system and _user_ tables, to be consistent with other \d*
commands.
array types for composite types. Although pg_dump understood it wasn't
supposed to dump these array types as separate objects, it must include
them in the dependency ordering analysis, and it was improperly assigning them
the same relatively-high sort priority as regular types. This resulted in
effectively moving composite types and tables up to that same high priority,
which broke any ordering requirements that weren't explicitly enforced by
dependencies. In particular user-defined operator classes, which should come
out before tables, failed to do so. Per report from Brendan Jurd.
In passing, also fix an ill-considered decision to give text search objects
the same sort priority as functions and operators --- the sort result looks
a lot nicer if different object types are kept separate. The recent
foreign-data patch had copied that decision, making the sort ordering even
messier :-(
It's not possible to do CREATE DATABASE inside a transaction, so previously
we just got a server error instead.
Backpatch to 8.2, which is where the -1 feature appeared.
performing dumps and restores in accordance with a security policy that
forbids logging in directly as superuser, but instead specifies that you
should log into an admin account and then SET ROLE to the superuser.
In passing, clean up some ugly and mostly-broken code for quoting shell
arguments in pg_dumpall.
Benedek László, with some help from Tom Lane
various display commands, not only for \z.
In passing, fix some infelicities in the newly added \d commands for SQL-MED
catalogs.
Andreas Scherbaum and Tom Lane
so that user-defined window functions are possible. For the moment you'll
have to write them in C, for lack of any interface to the WindowObject API
in the available PLs, but it's better than no support at all.
There was some debate about the best syntax for this. I ended up choosing
the "it's an attribute" position --- the other approach will inevitably be
more work, and the likely market for user-defined window functions is
probably too small to justify it.
This doesn't do any remote or external things yet, but it gives modules
like plproxy and dblink a standardized and future-proof system for
managing their connection information.
Martin Pihlak and Peter Eisentraut
results (ie, an empty "broken" buffer) if memory overrun occurs anywhere
along the way to filling the buffer. The previous coding would just silently
discard portions of the intended buffer contents, as exhibited in trouble
report from Sam Mason. Also, tweak psql's main loop to correctly detect
and report such overruns. There's probably much more that should be done
in this line, but this is a start.
Sort the output by command name. This previously only worked by source
file name, which doesn't always match the command name exactly. And it
certainly won't work for multiple refnames.
up a SSL connection, but psql is compiled without support for it.
Not a really realistic use-case, but the patch also cuts down on
the number of places with #ifdef's...
specifically, we can input either the "format with designators" or the
"alternative format", and we can output the former when IntervalStyle is set
to iso_8601.
Ron Mayer
different locales. This is just syntactical sweetener over --lc-collate and
--lc-ctype. Per discussion.
While at it, properly document --lc-ctype and --lc-collate in SGML docs,
which apparently were forgotten (or purposefully ommited?) when they were
created.
("there might be triggers") rather than an exact count. This is necessary
catalog infrastructure for the upcoming patch to reduce the strength of
locking needed for trigger addition/removal. Split out and committed
separately for ease of reviewing/testing.
In passing, also get rid of the unused pg_class columns relukeys, relfkeys,
and relrefs, which haven't been maintained in many years and now have no
chance of ever being maintained (because of wishing to avoid locking).
Simon Riggs
from DateStyle, and create a new interval style that produces output matching
the SQL standard (at least for interval values that fall within the standard's
restrictions). IntervalStyle is also used to resolve the conflict between the
standard and traditional Postgres rules for interpreting negative interval
input.
Ron Mayer
to dump sequence values cope with sequences outside the search path and/or
having names that need quoting. No back-patch needed because these are new
problems in 8.4.
Kris Jurka (also a little bit of code beautification by tgl)
There are some unimplemented aspects: recursive queries must use UNION ALL
(should allow UNION too), and we don't have SEARCH or CYCLE clauses.
These might or might not get done for 8.4, but even without them it's a
pretty useful feature.
There are also a couple of small loose ends and definitional quibbles,
which I'll send a memo about to pgsql-hackers shortly. But let's land
the patch now so we can get on with other development.
Yoshiyuki Asaba, with lots of help from Tatsuo Ishii and Tom Lane
free space information is stored in a dedicated FSM relation fork, with each
relation (except for hash indexes; they don't use FSM).
This eliminates the max_fsm_relations and max_fsm_pages GUC options; remove any
trace of them from the backend, initdb, and documentation.
Rewrite contrib/pg_freespacemap to match the new FSM implementation. Also
introduce a new variant of the get_raw_page(regclass, int4, int4) function in
contrib/pageinspect that let's you to return pages from any relation fork, and
a new fsm_page_contents() function to inspect the new FSM pages.
ctype are now more like encoding, stored in new datcollate and datctype
columns in pg_database.
This is a stripped-down version of Radek Strnad's patch, with further
changes by me.
referenced tables are dumped before the referencing tables. This avoids
failures when the data is loaded with the FK constraints already active.
If no such ordering is possible because of circular or self-referential
constraints, print a NOTICE to warn the user about it.
for editing if no function name is specified. This seems a much cleaner way
to offer that functionality than the original patch had. In passing,
de-clutter the error displays that are given for a bogus function-name
argument, and standardize on "$function$" as the default delimiter for the
function body. (The original coding would use the shortest possible
dollar-quote delimiter, which seems to create unnecessarily high risk of
later conflicts with the user-modified function body.)
In support of that, create a backend function pg_get_functiondef().
The psql command is functional but maybe a bit rough around the edges...
Abhijit Menon-Sen
returns NULL instead of a PGresult. The former coding would fail, which
is OK, but it neglected to give you the PQerrorMessage that might tell
you why. In the oldest branches, there was another problem: it'd sometimes
report PQerrorMessage from the wrong connection.
This allows the use of a ramdrive (either through mount or symlink) for
the temporary file that's written every half second, which should
reduce I/O.
On server shutdown/startup, the file is written to the old location in
the global directory, to preserve data across restarts.
Bump catversion since the $PGDATA directory layout changed.
only type categories in which the previous coding made *every* type
preferred; so there is no change in effective behavior, because the function
resolution rules only do something different when faced with a choice
between preferred and non-preferred types in the same category. It just
seems safer and less surprising to have CREATE TYPE default to non-preferred
status ...
with system catalog lookups, as was foreseen to be necessary almost since
their creation. Instead put the information into two new pg_type columns,
typcategory and typispreferred. Add support for setting these when
creating a user-defined base type.
The category column is just a "char" (i.e. a poor man's enum), allowing
a crude form of user extensibility of the category list: just use an
otherwise-unused character. This seems sufficient for foreseen uses,
but we could upgrade to having an actual category catalog someday, if
there proves to be a huge demand for custom type categories.
In this patch I have attempted to hew exactly to the behavior of the
previous hardwired logic, except for introducing new type categories for
arrays, composites, and enums. In particular the default preferred state
for user-defined types remains TRUE. That seems worth revisiting, but it
should be done as a separate patch from introducing the infrastructure.
Likewise, any adjustment of the standard set of categories should be done
separately.
the postgres.bki file during build, because we want that file to be entirely
platform- and configuration-independent; else it can't safely be put into
/usr/share on multiarch machines. We can do the substitution during initdb,
instead. FLOAT4PASSBYVAL and FLOAT8PASSBYVAL are new breakage as of 8.4,
while the NAMEDATALEN hazard has been there all along but I guess no one
tripped over it. Noticed while trying to build "universal" OS X binaries.
need to deconstruct proargmodes for each pg_proc entry inspected by
FuncnameGetCandidates(). Fixes function lookup performance regression
caused by yesterday's variadic-functions patch.
In passing, make pg_proc.probin be NULL, rather than a dummy value '-',
in cases where it is not actually used for the particular type of function.
This should buy back some of the space cost of the extra column.
so long as all the trailing arguments are of the same (non-array) type.
The function receives them as a single array argument (which is why they
have to all be the same type).
It might be useful to extend this facility to aggregates, but this patch
doesn't do that.
This patch imposes a noticeable slowdown on function lookup --- a follow-on
patch will fix that by adding a redundant column to pg_proc.
Pavel Stehule
output for CREATE FUNCTION. This makes it easier to read especially if the
function body is long.
Original idea and patch by Greg Sabino Mullane, though this is a stripped
down version of that.
Basically just reuse the same text that psql emitted as part of
its startup banner in prior versions, and make some whitespace
more consistent with the conventions in other psql command output.
doesn't work, and the real reason why not is it's unclear where the path
is relative to (initdb's CWD, or the data directory?). We could make an
arbitrary decision, but it seems best to make the user be unambiguous.
Per gripe from Devrim.
found to have been made necessary by our skipping tty detection on Windows. Now
that we are doing tty detection on Windows the kluge is unnecessary and wrong.
sequence to be reset to its original starting value. This requires adding the
original start value to the set of parameters (columns) of a sequence object,
which is a user-visible change with potential compatibility implications;
it also forces initdb.
Also add hopefully-SQL-compatible RESTART/CONTINUE IDENTITY options to
TRUNCATE TABLE. RESTART IDENTITY executes ALTER SEQUENCE RESTART for all
sequences "owned by" any of the truncated relations. CONTINUE IDENTITY is
a no-op option.
Zoltan Boszormenyi
file portability/instr_time.h, and add a couple more macros to eliminate
some abstraction leakage we formerly had. Also update psql to use this
header instead of its own copy of nearly the same code.
This commit in itself is just code cleanup and shouldn't change anything.
It lays some groundwork for the upcoming function-stats patch, though.
Provides for better code readability, but mainly this is infrastructure changes
to allow further changes such as arbitrary footers on printed tables. Also,
the translation status of each element in the table is more easily customized.
Brendan Jurd, with some editorialization by me.
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.
output column are not emitted. (That change already caused more noise in
the regression test output files than I would like.) Provide some needed
editorial help for comments, clean up code formatting.
as those for inherited columns; that is, it's no longer allowed for a child
table to not have a check constraint matching one that exists on a parent.
This satisfies the principle of least surprise (rows selected from the parent
will always appear to meet its check constraints) and eliminates some
longstanding bogosity in pg_dump, which formerly had to guess about whether
check constraints were really inherited or not.
The implementation involves adding conislocal and coninhcount columns to
pg_constraint (paralleling attislocal and attinhcount in pg_attribute)
and refactoring various ALTER TABLE actions to be more like those for
columns.
Alex Hunsaker, Nikhil Sontakke, Tom Lane
This has been the only documented and encouraged syntax for a long time, and
with extension facilities such as aliases being proposed, it is a good time to
clean up the legacy syntax a bit.
Author: Bernd Helmle <mailings@oopsware.de>
have pg_ctl warn about this.
Cancel running online backups (by renaming the backup_label file,
thus rendering the backup useless) when shutting down in fast mode.
Laurenz Albe
where Datum is 8 bytes wide. Since this will break old-style C functions
(those still using version 0 calling convention) that have arguments or
results of these types, provide a configure option to disable it and retain
the old pass-by-reference behavior. Likewise, provide a configure option
to disable the recently-committed float4 pass-by-value change.
Zoltan Boszormenyi, plus configurability stuff by me.
"consistent" functions, and remove pg_amop.opreqcheck, as per recent
discussion. The main immediate benefit of this is that we no longer need
8.3's ugly hack of requiring @@@ rather than @@ to test weight-using tsquery
searches on GIN indexes. In future it should be possible to optimize some
other queries better than is done now, by detecting at runtime whether the
index match is exact or not.
Tom Lane, after an idea of Heikki's, and with some help from Teodor.
the server version check is now always enforced. Relax the version check to
allow a server that is of pg_dump's own major version but a later minor
version; this is the only case that -i was at all safe to use in.
pg_restore already enforced only a very weak version check, so this is
really just a documentation change for it.
Per discussion.
where the relation name was schema-qualified, for example
UPDATE foo.bar SET <tab>
Also support cases where the relation name was quoted unnecessarily,
for example
UPDATE "foo" SET <tab>
Greg Sabino Mullane, slightly simplified by myself.
inclusions in src/include/catalog/*.h files. The main idea here is to push
function declarations for src/backend/catalog/*.c files into separate headers,
rather than sticking them into the corresponding catalog definition file as
has been done in the past. This commit only carries out that idea fully for
pg_proc, pg_type and pg_conversion, but that's enough for the moment ---
if pg_list.h ever becomes unsafe for frontend code to include, we'll need
to work a bit more.
Zdenek Kotala
dumps can be loaded into databases without the same tablespaces that the
source had. The option acts by suppressing all "SET default_tablespace"
commands, and also CREATE TABLESPACE commands in pg_dumpall's case.
Gavin Roy, with documentation and minor fixes by me.
errors in any commands, including in various clean targets that have so far
been handled inconsistently. make -i is available to ignore all errors in
a consistent and official way.
test=> \copy billing_data from ../BillingSamplePricerFile.csv with csv
header quote as '"' null as 'abc' null as '123'
\copy: parse error at "null"
Per report from Stephen Frost
by explicitly adding back the user to the DACL of the new process.
This fixes the failure case when executing as the Administrator
user, which had no permissions left at all after we dropped the
Administrators group.
Dave Page with some modifications from me
non-default settings for the postmaster's port number. The code to parse
command line options and postgresql.conf entries wasn't quite right about
whitespace or quotes, and it was coded in a not-very-readable way too.
Per bug #3969 from Itagaki Takahiro, though this is more extensive than his
proposed patch (which fixed only the whitespace problem).
This code has been broken since it was put in in 8.0, so patch all the way
back.
data structures and backend internal APIs. This solves problems we've seen
recently with inconsistent layout of pg_control between machines that have
32-bit time_t and those that have already migrated to 64-bit time_t. Also,
we can get out from under the problem that Windows' Unix-API emulation is not
consistent about the width of time_t.
There are a few remaining places where local time_t variables are used to hold
the current or recent result of time(NULL). I didn't bother changing these
since they do not affect any cross-module APIs and surely all platforms will
have 64-bit time_t before overflow becomes an actual risk. time_t should
be avoided for anything visible to extension modules, however.
to format properly for the actually needed column width, instead of having
a hard-wired assumption about the longest command name length. Also make it
respond to the current screen width. In passing, const-ify the constant
table.
This is to avoid uselessly requiring superuser permissions to restore
the dump without errors. Pretty grotty, but no better alternative seems
available, at least not in the near term.
psql's \d commands and other uses of printQuery(). Previously we would pass
these strings through gettext() and then send them to the server as literals
in the SQL query. But the code was not set up to handle doubling of quotes in
the strings, causing failure if a translation attempted to use the wrong kind
of quote marks, as indeed is now the case for (at least) the French
translation of \dFp. Another hazard was that gettext() would translate to
whatever encoding was implied by the client's LC_CTYPE setting, which might be
different from the client_encoding setting, which would probably cause the
server to reject the query as mis-encoded. The new arrangement is to send the
untranslated ASCII strings to the server, and do the translations inside
printQuery() after the query results come back. Per report from Guillaume
Lelarge and subsequent discussion.
useful and confuses people who think it is the same as -U. (Eventually
we might want to re-introduce it as being an alias for -U, but that should
not happen until the switch has actually not been there for a few releases.)
Likewise in pg_dump and pg_restore. Per gripe from Robert Treat and
subsequent discussion.
PQconnectionNeedsPassword function that tells the right thing for whether to
prompt for a password, and improve PQconnectionUsedPassword so that it checks
whether the password used by the connection was actually supplied as a
connection argument, instead of coming from environment or a password file.
Per bug report from Mark Cave-Ayland and subsequent discussion.
