(overlaying low byte of page size) and add HEAP_HASOID bit to t_infomask,
per earlier discussion. Simplify scheme for overlaying fields in tuple
header (no need for cmax to live in more than one place). Don't try to
clear infomask status bits in tqual.c --- not safe to do it there. Don't
try to force output table of a SELECT INTO to have OIDs, either. Get rid
of unnecessarily complex three-state scheme for TupleDesc.tdhasoids, which
has already caused one recent failure. Improve documentation.
to false provides more SQL-spec-compliant behavior than we had before.
I am not sure that setting it false is actually a good idea yet; there
is a lot of client-side code that will probably be broken by turning
autocommit off. But it's a start.
Loosely based on a patch by David Van Wie.
connections by the superuser only.
This patch replaces the last patch I sent a couple of days ago.
It closes a connection that has not been authorised by a superuser if it would
leave less than the GUC variable ReservedBackends
(superuser_reserved_connections in postgres.conf) backend process slots free
in the SISeg. This differs to the first patch which only reserved the last
ReservedBackends slots in the procState array. This has made the free slot
test more expensive due to the use of a lock.
After thinking about a comment on the first patch I've also made it a fatal
error if the number of reserved slots is not less than the maximum number of
connections.
Nigel J. Andrews
to make a reasonable attempt at accounting for palloc overhead, not just
the requested size of each memory chunk. Since in many scenarios this
will make for a significant reduction in the amount of space acquired,
partially compensate by doubling the default value of SORT_MEM to 1Mb.
Per discussion in pgsql-general around 9-Jun-2002..
bitmap, if present).
Per Tom Lane's suggestion the information whether a tuple has an oid
or not is carried in the tuple descriptor. For debugging reasons
tdhasoid is of type char, not bool. There are predefined values for
WITHOID, WITHOUTOID and UNDEFOID.
This patch has been generated against a cvs snapshot from last week
and I don't expect it to apply cleanly to current sources. While I
post it here for public review, I'm working on a new version against a
current snapshot. (There's been heavy activity recently; hope to
catch up some day ...)
This is a long patch; if it is too hard to swallow, I can provide it
in smaller pieces:
Part 1: Accessor macros
Part 2: tdhasoid in TupDesc
Part 3: Regression test
Part 4: Parameter withoid to heap_addheader
Part 5: Eliminate t_oid from HeapTupleHeader
Part 2 is the most hairy part because of changes in the executor and
even in the parser; the other parts are straightforward.
Up to part 4 the patched postmaster stays binary compatible to
databases created with an unpatched version. Part 5 is small (100
lines) and finally breaks compatibility.
Manfred Koizar
> Changes to avoid collisions with WIN32 & MFC names...
> 1. Renamed:
> a. PROC => PGPROC
> b. GetUserName() => GetUserNameFromId()
> c. GetCurrentTime() => GetCurrentDateTime()
> d. IGNORE => IGNORE_DTF in include/utils/datetime.h & utils/adt/datetim
>
> 2. Added _P to some lex/yacc tokens:
> CONST, CHAR, DELETE, FLOAT, GROUP, IN, OUT
Jan
yesterday's proposal to pghackers. Also remove unnecessary parameters
to heap_beginscan, heap_rescan. I modified pg_proc.h to reflect the
new numbers of parameters for the AM interface routines, but did not
force an initdb because nothing actually looks at those fields.
GUC support. It's now possible to set datestyle, timezone, and
client_encoding from postgresql.conf and per-database or per-user
settings. Also, implement rollback of SET commands that occur in a
transaction that later fails. Create a SET LOCAL var = value syntax
that sets the variable only for the duration of the current transaction.
All per previous discussions in pghackers.
to reset session userid to the originally-authenticated name. Also,
relax SET SESSION AUTHORIZATION to allow specifying one's own username
even if one is not superuser, so as to avoid unnecessary error messages
when loading a pg_dump file that uses this command. Per discussion from
several months ago.
As proof of concept, provide an alternate implementation based on POSIX
semaphores. Also push the SysV shared-memory implementation into a
separate file so that it can be replaced conveniently.
pg_database, pg_shadow, pg_group, all of which now have potentially-long
fields. Along the way, get rid of SharedSystemRelationNames list: shared
rels are now identified in their include/pg_catalog/*.h files by a
BKI_SHARED_RELATION macro, while indexes and toast rels inherit sharedness
automatically from their parent table. Fix some bugs with failure to detoast
pg_group.grolist during ALTER GROUP.
A new pg_hba.conf column, USER
Allow specifiction of lists of users separated by commas
Allow group names specified by +
Allow include files containing lists of users specified by @
Allow lists of databases, and database files
Allow samegroup in database column to match group name matching dbname
Removal of secondary password files
Remove pg_passwd utility
Lots of code cleanup in user.c and hba.c
New data/global/pg_pwd format
New data/global/pg_group file
path. The default behavior if no per-user schemas are created is that
all users share a 'public' namespace, thus providing behavior backwards
compatible with 7.2 and earlier releases. Probably the semantics and
default setting will need to be fine-tuned, but this is a start.
o Change all current CVS messages of NOTICE to WARNING. We were going
to do this just before 7.3 beta but it has to be done now, as you will
see below.
o Change current INFO messages that should be controlled by
client_min_messages to NOTICE.
o Force remaining INFO messages, like from EXPLAIN, VACUUM VERBOSE, etc.
to always go to the client.
o Remove INFO from the client_min_messages options and add NOTICE.
Seems we do need three non-ERROR elog levels to handle the various
behaviors we need for these messages.
Regression passed.
now just below FATAL in server_min_messages. Added more text to
highlight ordering difference between it and client_min_messages.
---------------------------------------------------------------------------
REALLYFATAL => PANIC
STOP => PANIC
New INFO level the prints to client by default
New LOG level the prints to server log by default
Cause VACUUM information to print only to the client
NOTICE => INFO where purely information messages are sent
DEBUG => LOG for purely server status messages
DEBUG removed, kept as backward compatible
DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1 added
DebugLvl removed in favor of new DEBUG[1-5] symbols
New server_min_messages GUC parameter with values:
DEBUG[5-1], INFO, NOTICE, ERROR, LOG, FATAL, PANIC
New client_min_messages GUC parameter with values:
DEBUG[5-1], LOG, INFO, NOTICE, ERROR, FATAL, PANIC
Server startup now logged with LOG instead of DEBUG
Remove debug_level GUC parameter
elog() numbers now start at 10
Add test to print error message if older elog() values are passed to elog()
Bootstrap mode now has a -d that requires an argument, like postmaster
Improve 'pg_internal.init' relcache entry preload mechanism so that it is
safe to use for all system catalogs, and arrange to preload a realistic
set of system-catalog entries instead of only the three nailed-in-cache
indexes that were formerly loaded this way. Fix mechanism for deleting
out-of-date pg_internal.init files: this must be synchronized with transaction
commit, not just done at random times within transactions. Drive it off
relcache invalidation mechanism so that no special-case tests are needed.
Cache additional information in relcache entries for indexes (their pg_index
tuples and index-operator OIDs) to eliminate repeated lookups. Also cache
index opclass info at the per-opclass level to avoid repeated lookups during
relcache load.
Generalize 'systable scan' utilities originally developed by Hiroshi,
move them into genam.c, use in a number of places where there was formerly
ugly code for choosing either heap or index scan. In particular this allows
simplification of the logic that prevents infinite recursion between syscache
and relcache during startup: we can easily switch to heapscans in relcache.c
when and where needed to avoid recursion, so IndexScanOK becomes simpler and
does not need any expensive initialization.
Eliminate useless opening of a heapscan data structure while doing an indexscan
(this saves an mdnblocks call and thus at least one kernel call).
recreated since the start of our transaction, our first reference to it
errored out because we'd try to reuse our old relcache entry for it.
Do this by accepting SI inval messages just before relcache search in
heap_openr, so that dead relcache entries will be flushed before we
search. Also, break heap_open/openr into two pairs of routines,
relation_open(r) and heap_open(r). The relation_open routines make
no tests on relkind and so can be used to open anything that has a
pg_class entry. The heap_open routines are wrappers that add a relkind
test to preserve their established behavior. Use the relation_open
routines in several places that had various kluge solutions for opening
rels that might be either heap or index rels.
Also, remove the old 'heap stats' code that's been superseded by Jan's
stats collector, and clean up some inconsistencies in error reporting
between the different types of ALTER TABLE.
in .:/home/postgres/testversion/bin:/opt/perl5.6.1/bin:/home/postgres/bin:/usr/local/bin:/usr/bin:/opt/ansic/bin:/usr/ccs/bin:/usr/contrib/bin:/opt/nettladm/bin:/opt/pd/bin:/usr/bin/X11:/usr/contrib/bin/X11:/opt/upgrade/bin:/opt/CC/bin:/opt/langtools/bin:/opt/graphics/phigs/bin:/opt/java/bin:/bin:/opt/imake/bin:/opt/hparray/bin:/opt/aCC/bin:/opt/lrom/bin:/usr/local/nmh/bin:. (I suppose the only common case for this is '.').
per suggestion from Peter. Simplify several APIs by transmitting the
original argv location directly from main.c to ps_status.c, instead of
passing it down through several levels of subroutines.
subprocesses; perhaps this will fix portability problem just noted by
Lockhart. Also, move test for bad permissions of DataDir to a more
logical place.
bootstrap) check for a valid PG_VERSION file before looking at anything
else in the data directory. This fixes confusing error report when
trying to start current sources in a pre-7.1 data directory.
Per trouble report from Rich Shepard 10/18/01.
side encoding name. This is necessary for client API's such as JDBC
to perform correct encoding conversions. See my email "[HACKERS]
pg_client_encoding" 10 Sep 2001.
existing lock manager and spinlocks: it understands exclusive vs shared
lock but has few other fancy features. Replace most uses of spinlocks
with lightweight locks. All remaining uses of spinlocks have very short
lock hold times (a few dozen instructions), so tweak spinlock backoff
code to work efficiently given this assumption. All per my proposal on
pghackers 26-Sep-01.
Assign the fixed user id 1 to the user created by initdb.
A stand-alone backend will always set the user id to 1.
(Consequently, the name of that user is no longer important.)
In stand-alone mode, the user id 1 will have implicit superuser
status, to allow repairs even if there are no users defined.
Print a warning message when starting in stand-alone mode when no
users are defined.
Disallow dropping the current user and session user.
Granting/revoking superuser status also grants/revokes usecatupd.
(Previously, it would never grant it back. This could lead to "deadlocks".)
CREATE USER and CREATE GROUP will start allocating user ids at 100
(unless explicitly specified), to prevent accidental creation of a
superuser (plus some room for future extensions).
for them, and making them just wastes time during backend startup/shutdown.
Also, remove compile-time MAXBACKENDS limit per long-ago proposal.
You can now set MaxBackends as high as your kernel can stand without
any reconfiguration/recompilation.
-------------------------------------------------------------------
Subject: Re: [PATCHES] encoding names
From: Karel Zak <zakkr@zf.jcu.cz>
To: Peter Eisentraut <peter_e@gmx.net>
Cc: pgsql-patches <pgsql-patches@postgresql.org>
Date: Fri, 31 Aug 2001 17:24:38 +0200
On Thu, Aug 30, 2001 at 01:30:40AM +0200, Peter Eisentraut wrote:
> > - convert encoding 'name' to 'id'
>
> I thought we decided not to add functions returning "new" names until we
> know exactly what the new names should be, and pending schema
Ok, the patch not to add functions.
> better
>
> ...(): encoding name too long
Fixed.
I found new bug in command/variable.c in parse_client_encoding(), nobody
probably never see this error:
if (pg_set_client_encoding(encoding))
{
elog(ERROR, "Conversion between %s and %s is not supported",
value, GetDatabaseEncodingName());
}
because pg_set_client_encoding() returns -1 for error and 0 as true.
It's fixed too.
IMHO it can be apply.
Karel
PS:
* following files are renamed:
src/utils/mb/Unicode/KOI8_to_utf8.map -->
src/utils/mb/Unicode/koi8r_to_utf8.map
src/utils/mb/Unicode/WIN_to_utf8.map -->
src/utils/mb/Unicode/win1251_to_utf8.map
src/utils/mb/Unicode/utf8_to_KOI8.map -->
src/utils/mb/Unicode/utf8_to_koi8r.map
src/utils/mb/Unicode/utf8_to_WIN.map -->
src/utils/mb/Unicode/utf8_to_win1251.map
* new file:
src/utils/mb/encname.c
* removed file:
src/utils/mb/common.c
--
Karel Zak <zakkr@zf.jcu.cz>
http://home.zf.jcu.cz/~zakkr/
C, PostgreSQL, PHP, WWW, http://docs.linux.cz, http://mape.jcu.cz
buffer manager with 'pg_clog', a specialized access method modeled
on pg_xlog. This simplifies startup (don't need to play games to
open pg_log; among other things, OverrideTransactionSystem goes away),
should improve performance a little, and opens the door to recycling
commit log space by removing no-longer-needed segments of the commit
log. Actual recycling is not there yet, but I felt I should commit
this part separately since it'd still be useful if we chose not to
do transaction ID wraparound.
a new postmaster child process. This should eliminate problems with
authentication blocking (e.g., ident, SSL init) and also reduce problems
with the accept queue filling up under heavy load.
The option to send elog output to a different file per backend (postgres -o)
has been disabled for now because the initialization would have to happen
in a different order and it's not clear we want to keep this anyway.
detected sooner in backend startup, and is treated as an expected error
(it gives 'Sorry, too many clients already' now). This allows us not
to have to enforce the MaxBackends limit exactly in the postmaster.
Also, remove ProcRemove() and fold its functionality into ProcKill().
There's no good reason for a backend not to be responsible for removing
its PROC entry, and there are lots of good reasons for the postmaster
not to be touching shared-memory data structures.
Tom Lane). For the moment, only the OID/name variants are provided.
I didn't force initdb, but the additions to the 'privileges' regress
test won't pass until you do one.
